1 files changed, 63 insertions, 0 deletions
diff --git a/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino b/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino
new file mode 100644
index 0000000..58475fd
--- /dev/null
+++ b/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino
@@ -0,0 +1,63 @@
+/***
+    eeprom_get example.
+ 
+    This shows how to use the EEPROM.get() method.
+    
+    To pre-set the EEPROM data, run the example sketch eeprom_put.
+    This sketch will run without it, however, the values shown 
+    will be shown from what ever is already on the EEPROM.
+    
+    This may cause the serial object to print out a large string
+    of garbage if there is no null character inside one of the strings
+    loaded.
+    
+    Written by Christopher Andrews 2015
+    Released under MIT licence.      
+***/
+
+#include <EEPROM.h>
+
+void setup(){
+  
+  float f = 0.00f;   //Variable to store data read from EEPROM.
+  int eeAddress = 0; //Location of the IP address inside the class.
+  
+  Serial.begin( 9600 );
+  Serial.print( "Read float from EEPROM: " );
+  
+  //Get the float data from the EEPROM at position 'eeAddress'
+  EEPROM.get( eeAddress, f );
+  Serial.println( f, 3 );  //This may print 'ovf, nan' if the data inside the EEPROM is not a valid float.
+  
+  /***
+    As get also returns a reference to 'f', you can use it inline.
+    E.g: Serial.print( EEPROM.get( eeAddress, f ) );
+  ***/
+  
+  /*** 
+    Get can be used with custom structures too. 
+    I have separated this into an extra function.
+  ***/
+  
+  secondTest(); //Run the next test.
+}
+
+struct MyObject{
+  float field1;
+  byte field2;
+  char name[10];
+};
+
+void secondTest(){
+  int eeAddress = sizeof(float); //Move address to the next byte after float 'f'.
+
+  MyObject customVar; //Variable to store custom object read from EEPROM.
+  EEPROM.get( eeAddress, customVar );
+  
+  Serial.println( "Read custom object from EEPROM: " );
+  Serial.println( customVar.field1 );
+  Serial.println( customVar.field2 );
+  Serial.println( customVar.name );
+}
+
+void loop(){ /* Empty loop */ }
+\ No newline at end of file