aboutsummaryrefslogtreecommitdiff
path: root/libraries/Bridge/examples
diff options
context:
space:
mode:
Diffstat (limited to 'libraries/Bridge/examples')
-rw-r--r--libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino61
1 files changed, 61 insertions, 0 deletions
diff --git a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
new file mode 100644
index 0000000..dea2ef5
--- /dev/null
+++ b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
@@ -0,0 +1,61 @@
+
+/*
+ Arduino Yun USB-to-Serial
+
+ Allows you to use the Yun's 32U4 processor as a
+ serial terminal for the linino processor
+
+ Upload this to an Arduino Yun via serial (not WiFi)
+ then open the serial monitor at 115200 to see the boot process
+ of the linino processor. You can also use the serial monitor
+ as a basic command line interface for the linino processor using
+ this sketch.
+
+ The circuit:
+ * Arduino Yun
+
+ created March 2013
+ by Massimo Banzi
+
+ This example code is in the public domain.
+ */
+
+long baud = 115200;
+
+// Pin 13 has an LED connected on most Arduino boards.
+// give it a name:
+int led = 13;
+int ledState = HIGH; // whether the LED is high or low
+
+
+void setup() {
+ Serial.begin(baud); // open serial connection to Linino
+ Serial1.begin(baud); // open serial connection via USB-Serial
+ Serial.println("Prova"); // Hello USB
+ Serial1.println("Prova1"); // Hello Linino
+
+ // initialize the digital pin as an output.
+ pinMode(led, OUTPUT);
+ digitalWrite(led, ledState); // turn the LED on (HIGH is the voltage level)
+}
+
+
+void loop() {
+
+ // copy from virtual serial line to uart and vice versa
+ if (Serial.available()) { // got anything from USB-Serial?
+ char c = (char)Serial.read(); // read from USB-serial
+ Serial1.write(c); // write to Linino
+ ledState=!ledState; // invert LED state
+ digitalWrite(led, ledState); // toggle the LED
+ }
+ if (Serial1.available()) { // got anything from Linino?
+ char c = (char)Serial1.read(); // read from Linino
+ Serial.write(c); // write to USB-serial
+ }
+}
+
+
+
+
+