1 files changed, 50 insertions, 0 deletions
diff --git a/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino
new file mode 100644
index 0000000..5921b70
--- /dev/null
+++ b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino
@@ -0,0 +1,50 @@
+
+/*
+ WiFi Status 
+ 
+ This sketch runs a script called "pretty-wifi-info.lua"
+ installed on your Yún in folder /usr/bin.
+ It prints information about the status of your wifi connection.
+
+ It uses Serial to print, so you need to connect your Yún to your
+ computer using a USB cable and select the appropriate port from
+ the Port menu
+
+ created  18 June 2013
+ By Federico Fissore
+ 
+ This example code is in the public domain.
+ */
+
+#include <Process.h>
+
+void setup() {
+  Serial.begin(9600);  // initialize serial communication
+  while(!Serial);      // do nothing until the serial monitor is opened
+ 
+  Serial.println("Starting bridge...\n");
+  pinMode(13,OUTPUT);  
+  digitalWrite(13, LOW);  
+  Bridge.begin();  // make contact with the linux processor
+  digitalWrite(13, HIGH);  // Led on pin 13 turns on when the bridge is ready
+
+  delay(2000);  // wait 2 seconds
+}
+
+void loop() {
+  Process wifiCheck;  // initialize a new process
+
+  wifiCheck.runShellCommand("/usr/bin/pretty-wifi-info.lua");  // command you want to run
+
+  // while there's any characters coming back from the 
+  // process, print them to the serial monitor:
+  while (wifiCheck.available() > 0) {
+    char c = wifiCheck.read();
+    Serial.print(c);
+  }
+  
+  Serial.println();
+  
+  delay(5000);
+}
+