diff options
Diffstat (limited to 'libraries/Bridge/examples/Temboo')
20 files changed, 0 insertions, 1895 deletions
diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino deleted file mode 100644 index 6543935..0000000 --- a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino +++ /dev/null @@ -1,443 +0,0 @@ -/* - ControlBySMS - - Demonstrates using an SMS message to a Twilio account to turn an LED - on the Yun board on and off using the Temboo Arduino Yun SDK. - Sending a SMS with the text "LED ON" to your Twilio phone number - will turn on the LED on the Yun. Sending "LED OFF" will turn it off. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses Twilio to retrieve the SMS, you'll also need a valid - Twilio account. You can create one for free at https://www.twilio.com. - - The sketch needs your Twilio Account SID and Auth Token you get when you - register with Twilio. Make sure to use the Account SID and Auth Token from - your Twilio Dashboard (not your test credentials from the Dev Tools panel). - - Normally, Twilio expects to contact a web site you provide to get a response - when an SMS message is received for your Twilio number. In this case, we - don't want to send any response (and we don't want to have to set up a web - site just to receive SMS messages.) You can use a URL that Twilio provides - for this purpose. When a message is received and sent to the Twilio "twimlets" - URL, it returns a code meaning "no response required." To set this up: - - 1. Log in to your Twilio account and go to this URL: - - https://www.twilio.com/user/account/phone-numbers/incoming - - 2. Select the Twilio number you want to receive SMS messages at. - - 3. Put this URL in the "SMS Request URL" field: - - http://twimlets.com/echo?Twiml=%3CResponse%3E%3C%2FResponse%3E - - See this link to Twilio's FAQ for details: - - https://www.twilio.com/help/faq/sms/how-can-i-receive-sms-messages-without-responding - - 4. Click the "Save Changes" button at the bottom of the page. - - Your account will now receive SMS messages, but won't send any responses. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// the Account SID from your Twilio account -const String TWILIO_ACCOUNT_SID = "xxxxxxxxxxxxxxxxxx"; - -// the Auth Token from your Twilio account -const String TWILIO_AUTH_TOKEN = "xxxxxxxxxxxxxxxxx"; - -// only act on messages sent from this phone number. (e.g. 15415551212) -const String FROM_PHONE_NUMBER = "xxxxxxxxxxx"; - -// how often (in milliseconds) to check for new SMS messages. -const unsigned long SMS_CHECK_PERIOD = 60000; - -// keep track of when we last checked for new messages -// (initialize it to SMS_CHECK_PERIOD seconds ago so -// we do the first check as soon as the sketch starts.) -unsigned long lastSMSCheckTime = -SMS_CHECK_PERIOD; - -// keep track of the ID of the last SMS message we processed. -// (we only need to process newer messages) -String lastSid; - -// we'll be turning the LED built in to the Yun on and off -// to simulate controlling some device. That LED is on pin 13. -int LED_PIN = 13; - -int numRuns = 1; // execution count, so this doesn't run forever -int maxRuns = 10; // the max number of times the Twitter HomeTimeline Choreo should run - - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - // tell the board to treat the LED pin as an output. - pinMode(LED_PIN, OUTPUT); - - // start with the LED off - digitalWrite(LED_PIN, LOW); - - // initialize the connection to the Linino processor. - Bridge.begin(); - - // Twilio will report old SMS messages. We want to - // ignore any existing control messages when we start. - Serial.println("Ignoring any existing control messages..."); - checkForMessages(true); - -} - -void loop() -{ - - // get the number of milliseconds the CPU has been running. - unsigned long now = millis(); - - // see if it's time to check for new SMS messages. - if (now - lastSMSCheckTime >= SMS_CHECK_PERIOD) { - - // it's time to check for new messages - // save this time so we know when to check next - lastSMSCheckTime = now; - - if (numRuns <= maxRuns) { - Serial.println("Checking for new SMS messages - Run #" + String(numRuns++)); - - // execute the choreo and don't ignore control messages. - checkForMessages(false); - } else { - Serial.println("Already ran " + String(maxRuns) + " times."); - } - } -} - -/* -This function executes the Twilio > SMSMessages > ListMessages choreo -and processes the results. - -If ignoreCommands is 'true', this function will read and process messages -updating 'lastSid', but will not actually take any action on any commands -found. This is so we can ignore any old control messages when we start. - -If ignoreCommands is 'false', control messages WILL be acted on. -*/ -void checkForMessages(bool ignoreCommands) { - - // we need a TembooChoreo object to send a Choreo request to Temboo - TembooChoreo ListMessagesChoreo; - - ListMessagesChoreo.begin(); - - // set Temboo account credentials - ListMessagesChoreo.setAccountName(TEMBOO_ACCOUNT); - ListMessagesChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - ListMessagesChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Twilio > SMSMessages > ListMessages) - ListMessagesChoreo.setChoreo("/Library/Twilio/SMSMessages/ListMessages"); - - // set the choreo inputs - // see https://www.temboo.com/library/Library/Twilio/SMSMessages/ListMessages/ - // for complete details about the inputs for this Choreo - - // the first input is a your Twilio AccountSID - ListMessagesChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID); - - // next is your Twilio Auth Token - ListMessagesChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN); - - // we only want to know about messages sent from our designated phone number - ListMessagesChoreo.addInput("From", FROM_PHONE_NUMBER); - - // Twilio can return information about up to 1000 messages at a time. - // we're only interested in the 3 most recent ones. Note that if - // this account receives lots of messages in quick succession, - // (more than 3 per minute in this case), we might miss some control - // messages. But if we request too many messages, we might run out of - // memory on the Arduino side of the Yun. - ListMessagesChoreo.addInput("PageSize", "3"); - - // We want the response in XML format to process with our - // XPath output filters. - ListMessagesChoreo.addInput("ResponseFormat", "xml"); - - // we don't want everything from the output, just the - // message IDs (the Sids) and the message texts - ListMessagesChoreo.addOutputFilter("sid", "Sid", "Response"); - ListMessagesChoreo.addOutputFilter("text", "Body", "Response"); - - // tell the Choreo to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = ListMessagesChoreo.run(); - - // a return code of zero (0) means success - if (returnCode == 0) { - - // Need a string to hold the list of message IDs. - String messageSids; - - // Need a string to hold the texts of the messages. - String messageTexts; - - // when the choreo results are available, process them. - // the output filters we specified will return comma delimited - // lists containing the Sids and texts of the messages - // from our designated phone number. - - while(ListMessagesChoreo.available()) { - - // output names are terminated with '\x1F' characters. - String name = ListMessagesChoreo.readStringUntil('\x1F'); - name.trim(); - //Serial.println(name); - - // output values are terminated with '\x1E' characters. - String data = ListMessagesChoreo.readStringUntil('\x1E'); - data.trim(); - //Serial.println(data); - - // assign the data to the appropriate string based on the name - if (name == "sid") { - messageSids = data; - } else if (name == "text") { - messageTexts = data; - } - } - - // done reading output, close the Choreo to free up resources. - ListMessagesChoreo.close(); - - // parse the comma delimited lists of messages and Sids - processMessages(messageTexts, messageSids, ignoreCommands); - - } else { - // a non-zero return code means there was an error - // read and print the error message - while(ListMessagesChoreo.available()) { - char c = ListMessagesChoreo.read(); - Serial.print(c); - } - } -} - -/* -This function processes the lists of message texts and Sids. -If a message contains a comma as part of the -message text, that message will be enclosed in double quotes -(") in the list. Example: - - A message,"Hey, now",Another message text - -If the message contains double quotes, it will be enclosed in -double quotes AND the internal quotes will be doubled. -Example: - - "Hi ""Sam"" the man", Led on - -NOTE! We are assuming that Twilio returns more recent messages -first. This isn't officially documented by Twilio, but we've -not seen any other case. - -'messageTexts' is a String containing a comma separated list of -message texts with commas and quotes escaped as described above. - -'messageSids' is a String containing a comma separated list of -message Sids. Sids should not contain embedded commas or quotes. - -'ignoreCommands' is a boolean. 'true' means and control messages -will not be acted upon. 'false' means control messages will be -acted upon in the usual way. -*/ -void processMessages(String messageTexts, String messageSids, bool ignoreCommands) { - - // proceed if we received at least one message - if (messageSids.length() > 0) { - int i = -1; - int sidsStart = 0; - int textsStart = 0; - String sid; - String text; - bool ledUpdated = false; - - // go through the list until we run out of items - // or otherwise know we can stop - do { - - // Output filter list items are separated by commas - // find the start of the next item in the list - i = messageSids.indexOf(',', sidsStart); - if (i >= 0) { - - //extract a single Sid from the list. - sid = messageSids.substring(sidsStart, i); - sidsStart = i + 1; - - // find the start of the next text in the list. - // Note that we have to be prepared to handle embedded - // quotes and commans in the message texts. - // The standard Arduino String class doesn't handle - // this, so we have to write our own function to do it. - i = quotedIndexOf(messageTexts, ',', textsStart); - if (i >= 0) { - - // extract a single message text from the list. - text = messageTexts.substring(textsStart, i); - textsStart = i + 1; - - // process the Sid and text to see if it's a - // control message. - ledUpdated = processMessage(sid, text, ignoreCommands); - } - } else { - - // the last item in the lists won't have a comma at the end, - // so we have to handle them specially. - // Since we know this is the last item, we can just - // take the rest of the string for the Sid and text. - sid = messageSids.substring(sidsStart); - text = messageTexts.substring(textsStart); - - // process the last item. - ledUpdated = processMessage(sid, text, ignoreCommands); - } - - // keep going until either we run out of list items - // or we run into a message we processed on a previous run. - } while ((i >=0) && (sid != lastSid)); - - // print what we've found to the serial monitor, - // just so we can see what's going on. - if (sid == lastSid) { - if (ledUpdated) - Serial.println("Control message processed."); - else - Serial.println("No new control messages received."); - } else { - Serial.println("No control messages received."); - } - } else { - Serial.println("No messages found"); - } -} - -/* -This function knows how to tell if a message is a control message -or not. It also knows know to control whatever it is we're controlling -(the state of the LED on pin 13 in this case.) - -A message with the text "LED ON" turns the LED on. -A message with the text "LED OFF" turns the LED off. -(Case is ignored.) - -If 'ignoreCommands' is true, the actions described above will NOT -take place. - -It also updates the 'lastSid' global variable when -a control message is processed. - -It returns 'true' if the message was a control message, and -'false' if it wasn't or if we've already processed this message. -*/ -bool processMessage(String sid, String text, bool ignoreCommands) { - - // a flag to indicate whether this was a control message or not - bool ledUpdated = false; - - // if we haven't already processed this message - if (sid != lastSid) { - - if (text.equalsIgnoreCase("LED ON")) { - - if (!ignoreCommands) { - //turn on the LED - digitalWrite(LED_PIN, HIGH); - Serial.println("LED ON"); - } - ledUpdated = true; - } else if (text.equalsIgnoreCase("LED OFF")) { - if (!ignoreCommands) { - //turn off the LED - digitalWrite(LED_PIN, LOW); - Serial.println("LED OFF"); - } - ledUpdated = true; - } - - // If the LED state was updated, remember the Sid if this message. - if (ledUpdated) - lastSid = sid; - } - return ledUpdated; -} - -/* -This function finds the index of a delimiter character in a String, -ignoring delimiters that appear inside double-quotes. -*/ -int quotedIndexOf(String s, char delim, int start) { - bool inQuotes = false; - char c; - int index = -1; - const char QUOTE = '"'; - do { - c = s[start++]; - if (c == QUOTE) - inQuotes = !inQuotes; - else if (c == delim && !inQuotes) - index = --start; - } while ((c != '\0') && (index < 0)); - return index; -} - - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can save it once, - then just distribute the main .ino file without worrying that you forgot to delete your credentials. -*/ - diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino deleted file mode 100644 index 669aba5..0000000 --- a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino +++ /dev/null @@ -1,115 +0,0 @@ -/* - GetYahooWeatherReport - - Demonstrates making a request to the Yahoo! Weather API using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - -// the address for which a weather forecast will be retrieved -String ADDRESS_FOR_FORECAST = "104 Franklin St., New York NY 10013"; - -int numRuns = 1; // execution count, so that this doesn't run forever -int maxRuns = 10; // max number of times the Yahoo WeatherByAddress Choreo should be run - - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - Bridge.begin(); - -} - -void loop() -{ - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - - // print status - Serial.println("Running GetWeatherByAddress - Run #" + String(numRuns++) + "..."); - - // create a TembooChoreo object to send a Choreo request to Temboo - TembooChoreo GetWeatherByAddressChoreo; - - // invoke the Temboo client - GetWeatherByAddressChoreo.begin(); - - // add your temboo account info - GetWeatherByAddressChoreo.setAccountName(TEMBOO_ACCOUNT); - GetWeatherByAddressChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - GetWeatherByAddressChoreo.setAppKey(TEMBOO_APP_KEY); - - // set the name of the choreo we want to run - GetWeatherByAddressChoreo.setChoreo("/Library/Yahoo/Weather/GetWeatherByAddress"); - - // set choreo inputs; in this case, the address for which to retrieve weather data - // the Temboo client provides standardized calls to 100+ cloud APIs - GetWeatherByAddressChoreo.addInput("Address", ADDRESS_FOR_FORECAST); - - // add an output filter to extract the name of the city. - GetWeatherByAddressChoreo.addOutputFilter("city", "/rss/channel/yweather:location/@city", "Response"); - - // add an output filter to extract the current temperature - GetWeatherByAddressChoreo.addOutputFilter("temperature", "/rss/channel/item/yweather:condition/@temp", "Response"); - - // add an output filter to extract the date and time of the last report. - GetWeatherByAddressChoreo.addOutputFilter("date", "/rss/channel/item/yweather:condition/@date", "Response"); - - // run the choreo - GetWeatherByAddressChoreo.run(); - - // when the choreo results are available, print them to the serial monitor - while(GetWeatherByAddressChoreo.available()) { - - char c = GetWeatherByAddressChoreo.read(); - Serial.print(c); - } - GetWeatherByAddressChoreo.close(); - - } - - Serial.println("Waiting..."); - Serial.println(""); - delay(30000); // wait 30 seconds between GetWeatherByAddress calls -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino b/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino deleted file mode 100644 index b2edd1f..0000000 --- a/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino +++ /dev/null @@ -1,173 +0,0 @@ -/* - ReadATweet - - Demonstrates retrieving the most recent Tweet from a user's home timeline - using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - In order to run this sketch, you'll need to register an application using - the Twitter dev console at https://dev.twitter.com. After creating the - app, you'll find OAuth credentials for that application under the "OAuth Tool" tab. - Substitute these values for the placeholders below. - - This example assumes basic familiarity with Arduino sketches, and that your Yun - is connected to the Internet. - - Want to use another social API with your Arduino Yun? We've got Facebook, - Google+, Instagram, Tumblr and more in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. -const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token"; -const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret"; -const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key"; -const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret"; - -int numRuns = 1; // execution count, so this doesn't run forever -int maxRuns = 10; // the max number of times the Twitter HomeTimeline Choreo should run - -void setup() { - Serial.begin(9600); - - // For debugging, wait until a serial console is connected. - delay(4000); - while(!Serial); - Bridge.begin(); -} -void loop() -{ - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - Serial.println("Running ReadATweet - Run #" + String(numRuns++)); - - TembooChoreo HomeTimelineChoreo; - - // invoke the Temboo client. - // NOTE that the client must be reinvoked, and repopulated with - // appropriate arguments, each time its run() method is called. - HomeTimelineChoreo.begin(); - - // set Temboo account credentials - HomeTimelineChoreo.setAccountName(TEMBOO_ACCOUNT); - HomeTimelineChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - HomeTimelineChoreo.setAppKey(TEMBOO_APP_KEY); - - // tell the Temboo client which Choreo to run (Twitter > Timelines > HomeTimeline) - HomeTimelineChoreo.setChoreo("/Library/Twitter/Timelines/HomeTimeline"); - - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Twitter/Timelines/HomeTimeline/ - // for complete details about the inputs for this Choreo - - HomeTimelineChoreo.addInput("Count", "1"); // the max number of Tweets to return from each request - HomeTimelineChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN); - HomeTimelineChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET); - HomeTimelineChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY); - HomeTimelineChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET); - - // next, we'll define two output filters that let us specify the - // elements of the response from Twitter that we want to receive. - // see the examples at http://www.temboo.com/arduino - // for more on using output filters - - // we want the text of the tweet - HomeTimelineChoreo.addOutputFilter("tweet", "/[1]/text", "Response"); - - // and the name of the author - HomeTimelineChoreo.addOutputFilter("author", "/[1]/user/screen_name", "Response"); - - - // tell the Process to run and wait for the results. The - // return code will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = HomeTimelineChoreo.run(); - - // a response code of 0 means success; print the API response - if(returnCode == 0) { - - String author; // a String to hold the tweet author's name - String tweet; // a String to hold the text of the tweet - - - // choreo outputs are returned as key/value pairs, delimited with - // newlines and record/field terminator characters, for example: - // Name1\n\x1F - // Value1\n\x1E - // Name2\n\x1F - // Value2\n\x1E - - // see the examples at http://www.temboo.com/arduino for more details - // we can read this format into separate variables, as follows: - - while(HomeTimelineChoreo.available()) { - // read the name of the output item - String name = HomeTimelineChoreo.readStringUntil('\x1F'); - name.trim(); - - // read the value of the output item - String data = HomeTimelineChoreo.readStringUntil('\x1E'); - data.trim(); - - // assign the value to the appropriate String - if (name == "tweet") { - tweet = data; - } else if (name == "author") { - author = data; - } - } - - Serial.println("@" + author + " - " + tweet); - - } else { - // there was an error - // print the raw output from the choreo - while(HomeTimelineChoreo.available()) { - char c = HomeTimelineChoreo.read(); - Serial.print(c); - } - } - - HomeTimelineChoreo.close(); - - } - - Serial.println("Waiting..."); - delay(90000); // wait 90 seconds between HomeTimeline calls -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino b/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino deleted file mode 100644 index 2e34a82..0000000 --- a/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino +++ /dev/null @@ -1,138 +0,0 @@ -/* - SendATweet - - Demonstrates sending a tweet via a Twitter account using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - In order to run this sketch, you'll need to register an application using - the Twitter dev console at https://dev.twitter.com. Note that since this - sketch creates a new tweet, your application will need to be configured with - read+write permissions. After creating the app, you'll find OAuth credentials - for that application under the "OAuth Tool" tab. Substitute these values for - the placeholders below. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Want to use another social API with your Arduino Yun? We've got Facebook, - Google+, Instagram, Tumblr and more in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. -const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token"; -const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret"; -const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key"; -const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret"; - -int numRuns = 1; // execution count, so this sketch doesn't run forever -int maxRuns = 3; // the max number of times the Twitter Update Choreo should run - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - Bridge.begin(); -} - -void loop() -{ - // only try to send the tweet if we haven't already sent it successfully - if (numRuns <= maxRuns) { - - Serial.println("Running SendATweet - Run #" + String(numRuns++) + "..."); - - // define the text of the tweet we want to send - String tweetText("My Arduino Yun has been running for " + String(millis()) + " milliseconds."); - - - TembooChoreo StatusesUpdateChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked, and repopulated with - // appropriate arguments, each time its run() method is called. - StatusesUpdateChoreo.begin(); - - // set Temboo account credentials - StatusesUpdateChoreo.setAccountName(TEMBOO_ACCOUNT); - StatusesUpdateChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - StatusesUpdateChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Twitter > Tweets > StatusesUpdate) - StatusesUpdateChoreo.setChoreo("/Library/Twitter/Tweets/StatusesUpdate"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Twitter/Tweets/StatusesUpdate/ - // for complete details about the inputs for this Choreo - - // add the Twitter account information - StatusesUpdateChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN); - StatusesUpdateChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET); - StatusesUpdateChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY); - StatusesUpdateChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET); - - // and the tweet we want to send - StatusesUpdateChoreo.addInput("StatusUpdate", tweetText); - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = StatusesUpdateChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! Tweet sent!"); - } else { - // a non-zero return code means there was an error - // read and print the error message - while (StatusesUpdateChoreo.available()) { - char c = StatusesUpdateChoreo.read(); - Serial.print(c); - } - } - StatusesUpdateChoreo.close(); - - // do nothing for the next 90 seconds - Serial.println("Waiting..."); - delay(90000); - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino b/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino deleted file mode 100644 index 4f841f8..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino +++ /dev/null @@ -1,137 +0,0 @@ -/* - SendAnEmail - - Demonstrates sending an email via a Google Gmail account using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses Gmail to send the email, you'll also need a valid - Google Gmail account. The sketch needs the username and password you use - to log into your Gmail account - substitute the placeholders below for these values. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// your Gmail username, formatted as a complete email address, eg "bob.smith@gmail.com" -const String GMAIL_USER_NAME = "xxxxxxxxxx"; - -// your Gmail password -const String GMAIL_PASSWORD = "xxxxxxxxxx"; - -// the email address you want to send the email to, eg "jane.doe@temboo.com" -const String TO_EMAIL_ADDRESS = "xxxxxxxxxx"; - -// a flag to indicate whether we've tried to send the email yet or not -boolean attempted = false; - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - Bridge.begin(); -} - -void loop() -{ - // only try to send the email if we haven't already tried - if (!attempted) { - - Serial.println("Running SendAnEmail..."); - - TembooChoreo SendEmailChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked, and repopulated with - // appropriate arguments, each time its run() method is called. - SendEmailChoreo.begin(); - - // set Temboo account credentials - SendEmailChoreo.setAccountName(TEMBOO_ACCOUNT); - SendEmailChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - SendEmailChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Google > Gmail > SendEmail) - SendEmailChoreo.setChoreo("/Library/Google/Gmail/SendEmail"); - - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Google/Gmail/SendEmail/ - // for complete details about the inputs for this Choreo - - // the first input is your Gmail email address. - SendEmailChoreo.addInput("Username", GMAIL_USER_NAME); - // next is your Gmail password. - SendEmailChoreo.addInput("Password", GMAIL_PASSWORD); - // who to send the email to - SendEmailChoreo.addInput("ToAddress", TO_EMAIL_ADDRESS); - // then a subject line - SendEmailChoreo.addInput("Subject", "ALERT: Greenhouse Temperature"); - - // next comes the message body, the main content of the email - SendEmailChoreo.addInput("MessageBody", "Hey! The greenhouse is too cold!"); - - // tell the Choreo to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = SendEmailChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! Email sent!"); - } else { - // a non-zero return code means there was an error - // read and print the error message - while (SendEmailChoreo.available()) { - char c = SendEmailChoreo.read(); - Serial.print(c); - } - } - SendEmailChoreo.close(); - - // set the flag showing we've tried - attempted = true; - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino b/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino deleted file mode 100644 index 2b0cfb1..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino +++ /dev/null @@ -1,154 +0,0 @@ -/* - SendAnSMS - - Demonstrates sending an SMS via Twilio using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses Twilio to send the SMS, you'll also need a valid - Twilio account. You can create one for free at https://www.twilio.com. - - The sketch needs your Twilio phone number, along with - the Account SID and Auth Token you get when you register with Twilio. - Make sure to use the Account SID and Auth Token from your Twilio Dashboard - (not your test credentials from the Dev Tools panel). - - Also note that if you're using a free Twilio account, you'll need to verify - the phone number to which messages are being sent by going to twilio.com and following - the instructions under the "Numbers > Verified Caller IDs" tab (this restriction - doesn't apply if you have a paid Twilio account). - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// the Account SID from your Twilio account -const String TWILIO_ACCOUNT_SID = "xxxxxxxxxx"; - -// the Auth Token from your Twilio account -const String TWILIO_AUTH_TOKEN = "xxxxxxxxxx"; - -// your Twilio phone number, e.g., "+1 555-222-1212" -const String TWILIO_NUMBER = "xxxxxxxxxx"; - -// the number to which the SMS should be sent, e.g., "+1 555-222-1212" -const String RECIPIENT_NUMBER = "xxxxxxxxxx"; - -// a flag to indicate whether we've attempted to send the SMS yet or not -boolean attempted = false; - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - Bridge.begin(); -} - -void loop() -{ - // only try to send the SMS if we haven't already sent it successfully - if (!attempted) { - - Serial.println("Running SendAnSMS..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo SendSMSChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - SendSMSChoreo.begin(); - - // set Temboo account credentials - SendSMSChoreo.setAccountName(TEMBOO_ACCOUNT); - SendSMSChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - SendSMSChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Twilio > SMSMessages > SendSMS) - SendSMSChoreo.setChoreo("/Library/Twilio/SMSMessages/SendSMS"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Twilio/SMSMessages/SendSMS/ - // for complete details about the inputs for this Choreo - - // the first input is a your AccountSID - SendSMSChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID); - - // next is your Auth Token - SendSMSChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN); - - // next is your Twilio phone number - SendSMSChoreo.addInput("From", TWILIO_NUMBER); - - // next, what number to send the SMS to - SendSMSChoreo.addInput("To", RECIPIENT_NUMBER); - - // finally, the text of the message to send - SendSMSChoreo.addInput("Body", "Hey, there! This is a message from your Arduino Yun!"); - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = SendSMSChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! SMS sent!"); - } else { - // a non-zero return code means there was an error - // read and print the error message - while (SendSMSChoreo.available()) { - char c = SendSMSChoreo.read(); - Serial.print(c); - } - } - SendSMSChoreo.close(); - - // set the flag indicatine we've tried once. - attempted=true; - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino deleted file mode 100644 index 1f1b6b4..0000000 --- a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino +++ /dev/null @@ -1,178 +0,0 @@ -/* - SendDataToGoogleSpreadsheet - - Demonstrates appending a row of data to a Google spreadsheet using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses a Google spreadsheet, you'll also need a - Google account: substitute the placeholders below for your Google account values. - - This example assumes basic familiarity with Arduino sketches, and that your - Yun is connected to the Internet. - - The columns in your spreadsheet must have labels for the Choreo to - work properly. It doesn't matter what the column labels actually are, - but there must be text in the first row of each column. This example - assumes there are two columns. The first column is the time (in milliseconds) - that the row was appended, and the second column is a sensor value. - In other words, your spreadsheet should look like: - - Time | Sensor Value | - ------+----------------- - | | - - NOTE that the first time you run this sketch, you may receive a warning from - Google, prompting you to authorize access from a 3rd party system. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. - -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information, - // as described in the footer comment below - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -const String GOOGLE_USERNAME = "your-google-username"; -const String GOOGLE_PASSWORD = "your-google-password"; - -// the title of the spreadsheet you want to send data to -// (Note that this must actually be the title of a Google spreadsheet -// that exists in your Google Drive/Docs account, and is configured -// as described above.) -const String SPREADSHEET_TITLE = "your-spreadsheet-title"; - -const unsigned long RUN_INTERVAL_MILLIS = 60000; // how often to run the Choreo (in milliseconds) - -// the last time we ran the Choreo -// (initialized to 60 seconds ago so the -// Choreo is run immediately when we start up) -unsigned long lastRun = (unsigned long)-60000; - -void setup() { - - // for debugging, wait until a serial console is connected - Serial.begin(9600); - delay(4000); - while(!Serial); - - Serial.print("Initializing the bridge..."); - Bridge.begin(); - Serial.println("Done"); -} - -void loop() -{ - // get the number of milliseconds this sketch has been running - unsigned long now = millis(); - - // run again if it's been 60 seconds since we last ran - if (now - lastRun >= RUN_INTERVAL_MILLIS) { - - // remember 'now' as the last time we ran the choreo - lastRun = now; - - Serial.println("Getting sensor value..."); - - // get the value we want to append to our spreadsheet - unsigned long sensorValue = getSensorValue(); - - Serial.println("Appending value to spreadsheet..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo AppendRowChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - AppendRowChoreo.begin(); - - // set Temboo account credentials - AppendRowChoreo.setAccountName(TEMBOO_ACCOUNT); - AppendRowChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - AppendRowChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Google > Spreadsheets > AppendRow) - AppendRowChoreo.setChoreo("/Library/Google/Spreadsheets/AppendRow"); - - // set the required Choreo inputs - // see https://www.temboo.com/library/Library/Google/Spreadsheets/AppendRow/ - // for complete details about the inputs for this Choreo - - // your Google username (usually your email address) - AppendRowChoreo.addInput("Username", GOOGLE_USERNAME); - - // your Google account password - AppendRowChoreo.addInput("Password", GOOGLE_PASSWORD); - - // the title of the spreadsheet you want to append to - // NOTE: substitute your own value, retaining the "SpreadsheetTitle:" prefix. - AppendRowChoreo.addInput("SpreadsheetTitle", SPREADSHEET_TITLE); - - // convert the time and sensor values to a comma separated string - String rowData(now); - rowData += ","; - rowData += sensorValue; - - // add the RowData input item - AppendRowChoreo.addInput("RowData", rowData); - - // run the Choreo and wait for the results - // The return code (returnCode) will indicate success or failure - unsigned int returnCode = AppendRowChoreo.run(); - - // return code of zero (0) means success - if (returnCode == 0) { - Serial.println("Success! Appended " + rowData); - Serial.println(""); - } else { - // return code of anything other than zero means failure - // read and display any error messages - while (AppendRowChoreo.available()) { - char c = AppendRowChoreo.read(); - Serial.print(c); - } - } - - AppendRowChoreo.close(); - } -} - -// this function simulates reading the value of a sensor -unsigned long getSensorValue() { - return analogRead(A0); -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino deleted file mode 100644 index 3b7f1d1..0000000 --- a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino +++ /dev/null @@ -1,171 +0,0 @@ -/* - ToxicFacilitiesSearch - - Demonstrates making a request to the Envirofacts API using Temboo from an Arduino Yun. - This example retrieves the names and addresses of EPA-regulated facilities in the - Toxins Release Inventory (TRI) database within a given zip code. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - -// the zip code to search for toxin-emitting facilities -String US_ZIP_CODE = "11215"; - -int numRuns = 1; // execution count, so that this doesn't run forever -int maxRuns = 10; // max number of times the Envirofacts FacilitiesSearch Choreo should be run - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - Bridge.begin(); -} - -void loop() -{ - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - - // print status - Serial.println("Running ToxicFacilitiesSearch - Run #" + String(numRuns++) + "..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo FacilitiesSearchByZipChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - FacilitiesSearchByZipChoreo.begin(); - - // set Temboo account credentials - FacilitiesSearchByZipChoreo.setAccountName(TEMBOO_ACCOUNT); - FacilitiesSearchByZipChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - FacilitiesSearchByZipChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (EnviroFacts > Toxins > FacilitiesSearchByZip) - FacilitiesSearchByZipChoreo.setChoreo("/Library/EnviroFacts/Toxins/FacilitiesSearchByZip"); - - // set choreo inputs; in this case, the US zip code for which to retrieve toxin release data - // the Temboo client provides standardized calls to 100+ cloud APIs - FacilitiesSearchByZipChoreo.addInput("Zip", US_ZIP_CODE); - - // specify two output filters, to help simplify the Envirofacts API results. - // see the tutorials on using Temboo SDK output filters at http://www.temboo.com/arduino - FacilitiesSearchByZipChoreo.addOutputFilter("fac", "FACILITY_NAME", "Response"); - - FacilitiesSearchByZipChoreo.addOutputFilter("addr", "STREET_ADDRESS", "Response"); - - // run the choreo - unsigned int returnCode = FacilitiesSearchByZipChoreo.run(); - if (returnCode == 0) { - String facilities; - String addresses; - - // when the choreo results are available, process them. - // the output filters we specified will return comma delimited - // lists containing the name and street address of the facilities - // located in the specified zip code. - while(FacilitiesSearchByZipChoreo.available()) { - String name = FacilitiesSearchByZipChoreo.readStringUntil('\x1F'); - name.trim(); - - String data = FacilitiesSearchByZipChoreo.readStringUntil('\x1E'); - data.trim(); - - if (name == "fac") { - facilities = data; - } else if (name == "addr") { - addresses = data; - } - } - FacilitiesSearchByZipChoreo.close(); - - // parse the comma delimited lists of facilities to join the - // name with the address and print it to the serial monitor - if (facilities.length() > 0) { - int i = -1; - int facilityStart = 0; - int addressStart = 0; - String facility; - String address; - do { - i = facilities.indexOf(',', facilityStart); - if (i >= 0) { - facility = facilities.substring(facilityStart, i); - facilityStart = i + 1; - } - - i = addresses.indexOf(',', addressStart); - if (i >= 0) { - address = addresses.substring(addressStart, i); - addressStart = i + 1; - } - - if (i >= 0) { - printResult(facility, address); - } - - }while (i >= 0); - facility = facilities.substring(facilityStart); - address = addresses.substring(addressStart); - printResult(facility, address); - } else { - Serial.println("No facilities found in zip code " + US_ZIP_CODE); - } - } else { - while(FacilitiesSearchByZipChoreo.available()) { - char c = FacilitiesSearchByZipChoreo.read(); - Serial.print(c); - } - } - } - Serial.println("Waiting..."); - Serial.println(""); - delay(30000); // wait 30 seconds between calls -} - -// a simple utility function, to output the facility name and address in the serial monitor. -void printResult(String facility, String address) { - Serial.print(facility); - Serial.print(" - "); - Serial.println(address); -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino deleted file mode 100644 index dd8cabd..0000000 --- a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino +++ /dev/null @@ -1,132 +0,0 @@ -/* - UpdateFacebookStatus - - Demonstrates sending a Facebook status update using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - In order to run this sketch, you'll need to register an application using - the Facebook dev console at https://developers.facebook.com/apps -- after creating - the app, log in to Temboo and visit https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/ - to use our OAuth Wizard (or OAuth Choreos) to obtain a Facebook access token. - Substitute your access token for the placeholder value of FACEBOOK_ACCESS_TOKEN below. - - This example assumes basic familiarity with Arduino sketches, and that your Yun - is connected to the Internet. - - Want to use another social API with your Arduino Yun? We've got Twitter, Google+, - Instagram, Tumblr and more in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information, - // as described in the footer comment below - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use a #define statement to specify this value in a .h file. - -// the Facebook Access Token, which can be obtained using the Temboo OAuth Wizard or Choreos -const String FACEBOOK_ACCESS_TOKEN = "xxxxxxxxxx"; - - -int numRuns = 1; // execution count, so this sketch doesn't run forever -int maxRuns = 10; // the max number of times the Facebook SetStatus Choreo should run - -void setup() { - Serial.begin(9600); - - // For debugging, wait until a serial console is connected. - delay(4000); - while(!Serial); - Bridge.begin(); -} - -void loop() { - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - - // print status - Serial.println("Running UpdateFacebookStatus - Run #" + String(numRuns++) + "..."); - - // Define the status message we want to post on Facebook; since Facebook - // doesn't allow duplicate status messages, we'll include a changing value. - String statusMsg = "My Arduino Yun has been running for " + String(millis()) + " milliseconds!"; - - // define the Process that will be used to call the "temboo" client - TembooChoreo SetStatusChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - SetStatusChoreo.begin(); - - // set Temboo account credentials - SetStatusChoreo.setAccountName(TEMBOO_ACCOUNT); - SetStatusChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - SetStatusChoreo.setAppKey(TEMBOO_APP_KEY); - - // tell the Temboo client which Choreo to run (Facebook > Publishing > SetStatus) - SetStatusChoreo.setChoreo("/Library/Facebook/Publishing/SetStatus"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/ - // for complete details about the inputs for this Choreo - - SetStatusChoreo.addInput("AccessToken", FACEBOOK_ACCESS_TOKEN); - SetStatusChoreo.addInput("Message", statusMsg); - - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = SetStatusChoreo.run(); - - // print the response code and API response. - Serial.println("Response code: " + String(returnCode)); - - // note that in this case, we're just printing the raw response from Facebook. - // see the examples on using Temboo SDK output filters at http://www.temboo.com/arduino - // for information on how to filter this data - while(SetStatusChoreo.available()) { - char c = SetStatusChoreo.read(); - Serial.print(c); - } - - SetStatusChoreo.close(); - } - - Serial.println("Waiting..."); - Serial.println(""); - - delay(30000); // wait 30 seconds between SetStatus calls -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h b/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino b/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino deleted file mode 100644 index 744dcdb..0000000 --- a/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino +++ /dev/null @@ -1,208 +0,0 @@ -/* - UploadToDropbox - - Demonstrates uploading a file to a Dropbox account using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - You'll also need a valid Dropbox app and accompanying OAuth credentials. - To create a Dropbox app, visit https://www.dropbox.com/developers/apps and - do the following: - - 1. Create a "Dropbox API app" - 2. Select "Files and datastores" - 3. Select "Yes - my app only needs access to the files it creates." - - Once you've created your app, follow the instructions at - https://www.temboo.com/library/Library/Dropbox/OAuth/ to run the Initialize and Finalize - OAuth Choreos. These Choreos complete the OAuth handshake and retrieve your Dropbox OAuth access tokens. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include <Bridge.h> -#include <Temboo.h> -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// your Dropbox app key, available on the Dropbox developer console after registering an app -const String DROPBOX_APP_KEY = "xxxxxxxxxx"; - -// your Dropbox app secret, available on the Dropbox developer console after registering an app -const String DROPBOX_APP_SECRET = "xxxxxxxxxx"; - -// your Dropbox access token, which is returned by the FinalizeOAuth Choreo -const String DROPBOX_ACCESS_TOKEN = "xxxxxxxxxx"; - -// your Dropbox access token secret, which is returned by the FinalizeOAuth Choreo -const String DROPBOX_ACCESS_TOKEN_SECRET = "xxxxxxxxxx"; - - -boolean success = false; // a flag to indicate whether we've uploaded the file yet - -void setup() { - Serial.begin(9600); - - // For debugging, wait until a serial console is connected. - delay(4000); - while(!Serial); - Bridge.begin(); -} - -void loop() -{ - // only try to upload the file if we haven't already done so - if (!success) { - - Serial.println("Base64 encoding data to upload..."); - - // base64 encode the data to upload - String base64EncodedData = base64Encode("Hello, Arduino!"); - - - Serial.println("Uploading data to Dropbox..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo UploadFileChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - UploadFileChoreo.begin(); - - // set Temboo account credentials - UploadFileChoreo.setAccountName(TEMBOO_ACCOUNT); - UploadFileChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - UploadFileChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Dropbox > FilesAndMetadata > UploadFile) - UploadFileChoreo.setChoreo("/Library/Dropbox/FilesAndMetadata/UploadFile"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Dropbox/FilesAndMetadata/UploadFile/ - // for complete details about the inputs for this Choreo - - // first specify the name of the file to create/update on Dropbox - UploadFileChoreo.addInput("FileName", "ArduinoTest.txt"); - - // next, the root folder on Dropbox relative to which the file path is specified. - // to work with the Dropbox app you created earlier, this should be left as "sandbox" - // if your Dropbox app has full access to your files, specify "dropbox" - UploadFileChoreo.addInput("Root","sandbox"); - - // next, the Base64 encoded file data to upload - UploadFileChoreo.addInput("FileContents", base64EncodedData); - - // finally, the Dropbox OAuth credentials defined above - UploadFileChoreo.addInput("AppSecret", DROPBOX_APP_SECRET); - UploadFileChoreo.addInput("AccessToken", DROPBOX_ACCESS_TOKEN); - UploadFileChoreo.addInput("AccessTokenSecret", DROPBOX_ACCESS_TOKEN_SECRET); - UploadFileChoreo.addInput("AppKey", DROPBOX_APP_KEY); - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = UploadFileChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! File uploaded!"); - success = true; - } else { - // a non-zero return code means there was an error - Serial.println("Uh-oh! Something went wrong!"); - } - - // print out the full response to the serial monitor in all - // cases, just for debugging - while (UploadFileChoreo.available()) { - char c = UploadFileChoreo.read(); - Serial.print(c); - } - UploadFileChoreo.close(); - - Serial.println("Waiting..."); - } - - delay(30000); // wait 30 seconds between upload attempts -} - - -/* - A utility function to Base64 encode the specified string - by calling a Temboo Utilities Choreo. -*/ -String base64Encode(String toEncode) { - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo Base64EncodeChoreo; - - // invoke the Temboo client - Base64EncodeChoreo.begin(); - - // set Temboo account credentials - Base64EncodeChoreo.setAccountName(TEMBOO_ACCOUNT); - Base64EncodeChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - Base64EncodeChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Utilities > Encoding > Base64Encode) - Base64EncodeChoreo.setChoreo("/Library/Utilities/Encoding/Base64Encode"); - - // set choreo inputs - Base64EncodeChoreo.addInput("Text", toEncode); - - // run the choreo - Base64EncodeChoreo.run(); - - // read in the choreo results, and return the "Base64EncodedText" output value. - // see http://www.temboo.com/arduino for more details on using choreo outputs. - while(Base64EncodeChoreo.available()) { - // read the name of the output item - String name = Base64EncodeChoreo.readStringUntil('\x1F'); - name.trim(); - - // read the value of the output item - String data = Base64EncodeChoreo.readStringUntil('\x1E'); - data.trim(); - - if(name == "Base64EncodedText") { - return data; - } - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ |