1 files changed, 0 insertions, 142 deletions
diff --git a/libraries/Bridge/examples/SendAnEmail/SendAnEmail.ino b/libraries/Bridge/examples/SendAnEmail/SendAnEmail.ino
deleted file mode 100644
index a8409d9..0000000
--- a/libraries/Bridge/examples/SendAnEmail/SendAnEmail.ino
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
-  SendAnEmail
-
-  Demonstrates sending an email via a Google Gmail account 
-  using the Temboo Arduino Yun SDK.
-
-  A Temboo account and application key are necessary to run all Temboo examples. 
-  If you don't already have one, you can register for a free Temboo account at 
-  http://www.temboo.com
-
-  Since this sketch uses Gmail to send the email, you'll also need a valid 
-  Google Gmail account. The sketch needs the username and password you use 
-  to log into your Gmail account: substitute the placeholders below for these values.
-
-  This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
-  to the Internet. For more tutorials on using the Temboo Library and Temboo Arduino Yun SDK, visit 
-  http://www.temboo.com/arduino
-  
-  This example code is in the public domain.
-*/
-
-#include <Bridge.h>
-#include <Console.h>
-#include <FileIO.h>
-#include <HttpClient.h>
-#include <Process.h>
-#include "TembooAccount.h" // contains Temboo account information, as described below
-
-
-boolean success = false; // a flag to indicate whether we've sent the email yet or not
-
-void setup() {
-  Serial.begin(9600);
-
-  // for debugging, wait until a serial console is connected
-  delay(4000);
-  while(!Serial);
-
-  Bridge.begin();
-}
-
-void loop()
-{
-  // only try to send the email if we haven't already sent it successfully
-  if (!success) {
-
-    Serial.println("Running SendEmail ...");
-    
-    // we need a Process object to send a Choreo request to Temboo
-    Process SendEmailChoreo;
-
-    // invoke the Temboo client
-    SendEmailChoreo.begin("temboo");
-    
-    // set Temboo account credentials
-    SendEmailChoreo.addParameter("-a");
-    SendEmailChoreo.addParameter(TEMBOO_ACCOUNT);
-    SendEmailChoreo.addParameter("-u");
-    SendEmailChoreo.addParameter(TEMBOO_APP_KEY_NAME);
-    SendEmailChoreo.addParameter("-p");
-    SendEmailChoreo.addParameter(TEMBOO_APP_KEY);
-
-   	// identify the Temboo Library choreo to run (Google > Gmail > SendEmail)
-    SendEmailChoreo.addParameter("-c");
-    SendEmailChoreo.addParameter("/Library/Google/Gmail/SendEmail");
-
-    // set the required choreo inputs
-    // see https://www.temboo.com/library/Library/Google/Gmail/SendEmail/ 
-    // for complete details about the inputs for this Choreo
-
-    // the first input is a your Gmail user name. 
-    // NOTE: substitute your own value, retaining the "Username:" prefix.
-    SendEmailChoreo.addParameter("-i");
-    SendEmailChoreo.addParameter("Username:your-gmail-username");
-    
-    // next is your Gmail password.
-    // NOTE: substitute your own value, retaining the "Password:" prefix
-    SendEmailChoreo.addParameter("-i");
-    SendEmailChoreo.addParameter("Password:your-gmail-password");
- 
-    // then a subject line
-    SendEmailChoreo.addParameter("-i");
-    SendEmailChoreo.addParameter("Subject:ALERT: Greenhouse Temperature");
-    
-    // next comes the message body, the main content of the email
-    SendEmailChoreo.addParameter("-i");
-    SendEmailChoreo.addParameter("MessageBody:Hey! The greenhouse is too cold!");
-
-    // next is the email address of who the email is from.
-    // NOTE: substitute your Gmail address, retaining the "FromAddress:" prefix.
-    SendEmailChoreo.addParameter("-i");
-    SendEmailChoreo.addParameter("FromAddress:your-gmail-email-address");
-
-    // who to send the email to
-    // NOTE: substitute your desired recipient, retaining the "ToAddress:" prefix
-    SendEmailChoreo.addParameter("-i");
-    SendEmailChoreo.addParameter("ToAddress:recipient-email-address");
-    
-    // tell the Process to run and wait for the results. The 
-    // return code (rc) will tell us whether the Temboo client 
-    // was able to send our request to the Temboo servers
-    unsigned int rc = SendEmailChoreo.run();
-
-    // a return code of zero (0) means everything worked
-    if (rc == 0) {
-        Serial.println("Success! Email sent!");
-        success = true;
-    } else {
-      // a non-zero return code means there was an error
-      // read and print the error message
-      while (SendEmailChoreo.available()) {
-        Serial.print((char)SendEmailChoreo.read());
-      }
-    } 
-    SendEmailChoreo.close();
-
-    // do nothing for the next 60 seconds
-    delay(60000);
-  }
-}
-
-/*
-  IMPORTANT NOTE: TembooAccount.h:
-
-  TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. 
-  You need to create this file. To do so, make a new tab in Arduino, call it TembooAccount.h, and 
-  include the following variables and constants:
-
-  #define TEMBOO_ACCOUNT "myTembooAccountName"  // your Temboo account name 
-  #define TEMBOO_APP_KEY_NAME "myFirstApp"  // your Temboo app key name
-  #define TEMBOO_APP_KEY  "xxx-xxx-xxx-xx-xxx"  // your Temboo app key
-
-  The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
-
-  Visit https://www.temboo.com/account to access your Temboo account credentials. 
-
-  Keeping your account information in a separate file means you can save it once, 
-  then just distribute the main .ino file without worrying that you forgot to delete your credentials.
-
-  (Be sure to delete this comment after creating your TembooAccount.h file!)
-*/
-