1 files changed, 0 insertions, 99 deletions
diff --git a/libraries/Bridge/examples/Datalogger/Datalogger.ino b/libraries/Bridge/examples/Datalogger/Datalogger.ino
deleted file mode 100644
index 2d792a4..0000000
--- a/libraries/Bridge/examples/Datalogger/Datalogger.ino
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-  SD card datalogger
- 
- This example shows how to log data from three analog sensors 
- to an SD card mounted on the Arduino Yún using the Bridge library.
- 	
- The circuit:
- * analog sensors on analog pins 0, 1 and 2
- * SD card attached to SD card slot of the Arduino Yún
- 
- Prepare your SD card creating an empty folder in the SD root 
- named "arduino". This will ensure that the Yún will create a link 
- to the SD to the "/mnt/sd" path.
- 
- You can remove the SD card while the Linux and the 
- sketch are running but be careful not to remove it while
- the system is writing to it.
- 
- created  24 Nov 2010
- modified 9 Apr 2012
- by Tom Igoe
- adapted to the Yún Bridge library 20 Jun 2013
- by Federico Vanzati
- modified  21 Jun 2013
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-
-#include <FileIO.h>
-
-void setup() {
-  // Initialize the Bridge and the Serial
-  Bridge.begin();
-  Serial.begin(9600);
-  FileSystem.begin();
-
-  while(!Serial);  // wait for Serial port to connect.
-  Serial.println("Filesystem datalogger\n");
-}
-
-
-void loop () {
-  // make a string that start with a timestamp for assembling the data to log:
-  String dataString;
-  dataString += getTimeStamp();
-  dataString += " = ";
-
-  // read three sensors and append to the string:
-  for (int analogPin = 0; analogPin < 3; analogPin++) {
-    int sensor = analogRead(analogPin);
-    dataString += String(sensor);
-    if (analogPin < 2) {
-      dataString += ",";  // separate the values with a comma
-    }
-  }
-
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  // The FileSystem card is mounted at the following "/mnt/FileSystema1"
-  File dataFile = FileSystem.open("/mnt/sd/datalog.txt", FILE_APPEND);
-
-  // if the file is available, write to it:
-  if (dataFile) {
-    dataFile.println(dataString);
-    dataFile.close();
-    // print to the serial port too:
-    Serial.println(dataString);
-  }  
-  // if the file isn't open, pop up an error:
-  else {
-    Serial.println("error opening datalog.txt");
-  } 
-  
-  delay(15000);
-
-}
-
-// This function return a string with the time stamp
-String getTimeStamp() {
-  String result;
-  Process time;
-  // date is a command line utility to get the date and the time 
-  // in different formats depending on the additional parameter 
-  time.begin("date");
-  time.addParameter("+%D-%T");  // parameters: D for the complete date mm/dd/yy
-                                //             T for the time hh:mm:ss    
-  time.run();  // run the command
-
-  // read the output of the command
-  while(time.available()>0) {
-    char c = time.read();
-    if(c != '\n')
-      result += c;
-  }
-  
-  return result;
-}