1 files changed, 99 insertions, 0 deletions
diff --git a/libraries/Bridge/examples/Datalogger/Datalogger.ino b/libraries/Bridge/examples/Datalogger/Datalogger.ino
new file mode 100644
index 0000000..2d792a4
--- /dev/null
+++ b/libraries/Bridge/examples/Datalogger/Datalogger.ino
@@ -0,0 +1,99 @@
+/*
+  SD card datalogger
+ 
+ This example shows how to log data from three analog sensors 
+ to an SD card mounted on the Arduino Yún using the Bridge library.
+ 	
+ The circuit:
+ * analog sensors on analog pins 0, 1 and 2
+ * SD card attached to SD card slot of the Arduino Yún
+ 
+ Prepare your SD card creating an empty folder in the SD root 
+ named "arduino". This will ensure that the Yún will create a link 
+ to the SD to the "/mnt/sd" path.
+ 
+ You can remove the SD card while the Linux and the 
+ sketch are running but be careful not to remove it while
+ the system is writing to it.
+ 
+ created  24 Nov 2010
+ modified 9 Apr 2012
+ by Tom Igoe
+ adapted to the Yún Bridge library 20 Jun 2013
+ by Federico Vanzati
+ modified  21 Jun 2013
+ by Tom Igoe
+ 
+ This example code is in the public domain.
+ 	 
+ */
+
+#include <FileIO.h>
+
+void setup() {
+  // Initialize the Bridge and the Serial
+  Bridge.begin();
+  Serial.begin(9600);
+  FileSystem.begin();
+
+  while(!Serial);  // wait for Serial port to connect.
+  Serial.println("Filesystem datalogger\n");
+}
+
+
+void loop () {
+  // make a string that start with a timestamp for assembling the data to log:
+  String dataString;
+  dataString += getTimeStamp();
+  dataString += " = ";
+
+  // read three sensors and append to the string:
+  for (int analogPin = 0; analogPin < 3; analogPin++) {
+    int sensor = analogRead(analogPin);
+    dataString += String(sensor);
+    if (analogPin < 2) {
+      dataString += ",";  // separate the values with a comma
+    }
+  }
+
+  // open the file. note that only one file can be open at a time,
+  // so you have to close this one before opening another.
+  // The FileSystem card is mounted at the following "/mnt/FileSystema1"
+  File dataFile = FileSystem.open("/mnt/sd/datalog.txt", FILE_APPEND);
+
+  // if the file is available, write to it:
+  if (dataFile) {
+    dataFile.println(dataString);
+    dataFile.close();
+    // print to the serial port too:
+    Serial.println(dataString);
+  }  
+  // if the file isn't open, pop up an error:
+  else {
+    Serial.println("error opening datalog.txt");
+  } 
+  
+  delay(15000);
+
+}
+
+// This function return a string with the time stamp
+String getTimeStamp() {
+  String result;
+  Process time;
+  // date is a command line utility to get the date and the time 
+  // in different formats depending on the additional parameter 
+  time.begin("date");
+  time.addParameter("+%D-%T");  // parameters: D for the complete date mm/dd/yy
+                                //             T for the time hh:mm:ss    
+  time.run();  // run the command
+
+  // read the output of the command
+  while(time.available()>0) {
+    char c = time.read();
+    if(c != '\n')
+      result += c;
+  }
+  
+  return result;
+}