diff options
Diffstat (limited to 'firmwares')
| -rwxr-xr-x | firmwares/arduino-usbserial/Arduino-usbserial.c | 33 | ||||
| -rwxr-xr-x | firmwares/arduino-usbserial/Descriptors.c | 4 |
2 files changed, 18 insertions, 19 deletions
diff --git a/firmwares/arduino-usbserial/Arduino-usbserial.c b/firmwares/arduino-usbserial/Arduino-usbserial.c index a2bdfb1..4de73c8 100755 --- a/firmwares/arduino-usbserial/Arduino-usbserial.c +++ b/firmwares/arduino-usbserial/Arduino-usbserial.c @@ -88,10 +88,15 @@ int main(void) for (;;)
{
- /* Read bytes from the USB OUT endpoint into the USART transmit buffer */
- int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
- if (!(ReceivedByte < 0) && !(RingBuffer_IsFull(&USBtoUSART_Buffer)))
- RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);
+ /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */
+ if (!(RingBuffer_IsFull(&USBtoUSART_Buffer)))
+ {
+ int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+ /* Read bytes from the USB OUT endpoint into the USART transmit buffer */
+ if (!(ReceivedByte < 0))
+ RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);
+ }
/* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */
RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
@@ -153,10 +158,7 @@ void SetupHardware(void) /** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
-
-
- if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface)))
- ;
+ CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
}
/** Event handler for the library USB Unhandled Control Request event. */
@@ -205,12 +207,13 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI UCSR1C = 0;
/* Special case 57600 baud for compatibility with the ATmega328 bootloader. */
- UCSR1A = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) ? 0 : (1 << U2X1);
- UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
- UCSR1C = ConfigMask;
UBRR1 = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600)
? SERIAL_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)
: SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
+
+ UCSR1C = ConfigMask;
+ UCSR1A = (CDCInterfaceInfo->State.LineEncoding.BaudRateBPS == 57600) ? 0 : (1 << U2X1);
+ UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
}
/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
@@ -233,11 +236,7 @@ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const C bool CurrentDTRState = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR);
if (CurrentDTRState)
- {
- AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;
- }
+ AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;
else
- {
- AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK;
- }
+ AVR_RESET_LINE_PORT |= AVR_RESET_LINE_MASK;
}
diff --git a/firmwares/arduino-usbserial/Descriptors.c b/firmwares/arduino-usbserial/Descriptors.c index e4ad956..025250e 100755 --- a/firmwares/arduino-usbserial/Descriptors.c +++ b/firmwares/arduino-usbserial/Descriptors.c @@ -172,7 +172,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
- .PollingIntervalMS = 0x00
+ .PollingIntervalMS = 0x01
},
.CDC_DataInEndpoint =
@@ -182,7 +182,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
.Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = CDC_TXRX_EPSIZE,
- .PollingIntervalMS = 0x00
+ .PollingIntervalMS = 0x01
}
};
|