diff options
Diffstat (limited to 'firmwares/wifishield/wifiHD/src/CONFIG')
| -rw-r--r-- | firmwares/wifishield/wifiHD/src/CONFIG/conf_access.h | 170 | ||||
| -rw-r--r-- | firmwares/wifishield/wifiHD/src/CONFIG/conf_at45dbx.h | 83 | ||||
| -rw-r--r-- | firmwares/wifishield/wifiHD/src/CONFIG/conf_ebi.h | 108 | ||||
| -rw-r--r-- | firmwares/wifishield/wifiHD/src/CONFIG/conf_sd_mmc_spi.h | 73 |
4 files changed, 0 insertions, 434 deletions
diff --git a/firmwares/wifishield/wifiHD/src/CONFIG/conf_access.h b/firmwares/wifishield/wifiHD/src/CONFIG/conf_access.h deleted file mode 100644 index 2d38d50..0000000 --- a/firmwares/wifishield/wifiHD/src/CONFIG/conf_access.h +++ /dev/null @@ -1,170 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief Memory access control configuration file. - * - * This file contains the possible external configuration of the memory access - * control. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _CONF_ACCESS_H_ -#define _CONF_ACCESS_H_ - -#include "compiler.h" -#include "board.h" - - -/*! \name Activation of Logical Unit Numbers - */ -//! @{ -#define LUN_0 DISABLE //!< On-Chip Virtual Memory. -#define LUN_1 ENABLE //!< AT45DBX Data Flash. -#define LUN_2 DISABLE //!< SD/MMC Card over SPI. -#define LUN_3 DISABLE -#define LUN_4 DISABLE -#define LUN_5 DISABLE -#define LUN_6 DISABLE -#define LUN_7 DISABLE -#define LUN_USB DISABLE //!< Host Mass-Storage Memory. -//! @} - -/*! \name LUN 0 Definitions - */ -//! @{ -#define VIRTUAL_MEM LUN_0 -#define LUN_ID_VIRTUAL_MEM LUN_ID_0 -#define LUN_0_INCLUDE "virtual_mem.h" -#define Lun_0_test_unit_ready virtual_test_unit_ready -#define Lun_0_read_capacity virtual_read_capacity -#define Lun_0_wr_protect virtual_wr_protect -#define Lun_0_removal virtual_removal -#define Lun_0_usb_read_10 virtual_usb_read_10 -#define Lun_0_usb_write_10 virtual_usb_write_10 -#define Lun_0_mem_2_ram virtual_mem_2_ram -#define Lun_0_ram_2_mem virtual_ram_2_mem -#define LUN_0_NAME "\"On-Chip Virtual Memory\"" -//! @} - -/*! \name LUN 1 Definitions - */ -//! @{ -#define AT45DBX_MEM LUN_1 -#define LUN_ID_AT45DBX_MEM LUN_ID_1 -#define LUN_1_INCLUDE "at45dbx_mem.h" -#define Lun_1_test_unit_ready at45dbx_test_unit_ready -#define Lun_1_read_capacity at45dbx_read_capacity -#define Lun_1_wr_protect at45dbx_wr_protect -#define Lun_1_removal at45dbx_removal -#define Lun_1_usb_read_10 at45dbx_usb_read_10 -#define Lun_1_usb_write_10 at45dbx_usb_write_10 -#define Lun_1_mem_2_ram at45dbx_df_2_ram -#define Lun_1_ram_2_mem at45dbx_ram_2_df -#define LUN_1_NAME "\"AT45DBX Data Flash\"" -//! @} - -/*! \name LUN 2 Definitions - */ -//! @{ -#define SD_MMC_SPI_MEM LUN_2 -#define LUN_ID_SD_MMC_SPI_MEM LUN_ID_2 -#define LUN_2_INCLUDE "sd_mmc_spi_mem.h" -#define Lun_2_test_unit_ready sd_mmc_spi_test_unit_ready -#define Lun_2_read_capacity sd_mmc_spi_read_capacity -#define Lun_2_wr_protect sd_mmc_spi_wr_protect -#define Lun_2_removal sd_mmc_spi_removal -#define Lun_2_usb_read_10 sd_mmc_spi_usb_read_10 -#define Lun_2_usb_write_10 sd_mmc_spi_usb_write_10 -#define Lun_2_mem_2_ram sd_mmc_spi_mem_2_ram -#define Lun_2_ram_2_mem sd_mmc_spi_ram_2_mem -#define LUN_2_NAME "\"SD/MMC Card over SPI\"" -//! @} - -/*! \name USB LUNs Definitions - */ -//! @{ -#define MEM_USB LUN_USB -#define LUN_ID_MEM_USB LUN_ID_USB -#define LUN_USB_INCLUDE "host_mem.h" -#define Lun_usb_test_unit_ready(lun) host_test_unit_ready(lun) -#define Lun_usb_read_capacity(lun, nb_sect) host_read_capacity(lun, nb_sect) -#define Lun_usb_read_sector_size(lun) host_read_sector_size(lun) -#define Lun_usb_wr_protect(lun) host_wr_protect(lun) -#define Lun_usb_removal() host_removal() -#define Lun_usb_mem_2_ram(addr, ram) host_read_10_ram(addr, ram) -#define Lun_usb_ram_2_mem(addr, ram) host_write_10_ram(addr, ram) -#define LUN_USB_NAME "\"Host Mass-Storage Memory\"" -//! @} - -/*! \name Actions Associated with Memory Accesses - * - * Write here the action to associate with each memory access. - * - * \warning Be careful not to waste time in order not to disturb the functions. - */ -//! @{ -#define memory_start_read_action(nb_sectors) -#define memory_stop_read_action() -#define memory_start_write_action(nb_sectors) -#define memory_stop_write_action() -//! @} - -/*! \name Activation of Interface Features - */ -//! @{ -#define ACCESS_USB DISABLED //!< MEM <-> USB interface. -#define ACCESS_MEM_TO_RAM ENABLED //!< MEM <-> RAM interface. -#define ACCESS_STREAM ENABLED //!< Streaming MEM <-> MEM interface. //mlf -#define ACCESS_STREAM_RECORD DISABLED //!< Streaming MEM <-> MEM interface in record mode. -#define ACCESS_MEM_TO_MEM DISABLED //!< MEM <-> MEM interface. -#define ACCESS_CODEC DISABLED //!< Codec interface. -//! @} - -/*! \name Specific Options for Access Control - */ -//! @{ -#define GLOBAL_WR_PROTECT DISABLED //!< Management of a global write protection. -//! @} - - -#endif // _CONF_ACCESS_H_ diff --git a/firmwares/wifishield/wifiHD/src/CONFIG/conf_at45dbx.h b/firmwares/wifishield/wifiHD/src/CONFIG/conf_at45dbx.h deleted file mode 100644 index 3280e4f..0000000 --- a/firmwares/wifishield/wifiHD/src/CONFIG/conf_at45dbx.h +++ /dev/null @@ -1,83 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief AT45DBX configuration file. - * - * This file contains the possible external configuration of the AT45DBX. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices with an SPI module can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _CONF_AT45DBX_H_ -#define _CONF_AT45DBX_H_ - - -#include "conf_access.h" - -#if AT45DBX_MEM == DISABLE - #error conf_at45dbx.h is #included although AT45DBX_MEM is disabled -#endif - - -#include "at45dbx.h" - - -//_____ D E F I N I T I O N S ______________________________________________ - -//! Size of AT45DBX data flash memories to manage. -#define AT45DBX_MEM_SIZE AT45DBX_1MB - -//! Number of AT45DBX components to manage. -#define AT45DBX_MEM_CNT 1 - -//! First chip select used by AT45DBX components on the SPI module instance. -//! AT45DBX_SPI_NPCS0_PIN always corresponds to this first NPCS, whatever it is. -#define AT45DBX_SPI_FIRST_NPCS AT45DBX_SPI_NPCS - -//! SPI master speed in Hz. -#define AT45DBX_SPI_MASTER_SPEED 12000000 - -//! Number of bits in each SPI transfer. -#define AT45DBX_SPI_BITS 8 - - -#endif // _CONF_AT45DBX_H_ diff --git a/firmwares/wifishield/wifiHD/src/CONFIG/conf_ebi.h b/firmwares/wifishield/wifiHD/src/CONFIG/conf_ebi.h deleted file mode 100644 index aacdb13..0000000 --- a/firmwares/wifishield/wifiHD/src/CONFIG/conf_ebi.h +++ /dev/null @@ -1,108 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief CONF_EBI EBI/SMC driver for AVR32 UC3. - * - * \note The values defined in this file are device-specific. See the device - * datasheet for further information. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices with an SMC module can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _CONF_EBI_H_ -#define _CONF_EBI_H_ - -#include "compiler.h" -#include "board.h" - -#if (ET024006DHU_SMC_USE_NCS == 0) -#define SMC_USE_NCS0 -#define SMC_COMPONENT_CS0 ET024006DHU_SMC_COMPONENT_CS -#else - -#if (ET024006DHU_SMC_USE_NCS == 2) -#define SMC_USE_NCS2 -#define SMC_COMPONENT_CS2 ET024006DHU_SMC_COMPONENT_CS - -#else -#error This board is not supported -#endif -#endif - -#define EBI_DATA_0 ET024006DHU_EBI_DATA_0 -#define EBI_DATA_1 ET024006DHU_EBI_DATA_1 -#define EBI_DATA_2 ET024006DHU_EBI_DATA_2 -#define EBI_DATA_3 ET024006DHU_EBI_DATA_3 -#define EBI_DATA_4 ET024006DHU_EBI_DATA_4 -#define EBI_DATA_5 ET024006DHU_EBI_DATA_5 -#define EBI_DATA_6 ET024006DHU_EBI_DATA_6 -#define EBI_DATA_7 ET024006DHU_EBI_DATA_7 -#define EBI_DATA_8 ET024006DHU_EBI_DATA_8 -#define EBI_DATA_9 ET024006DHU_EBI_DATA_9 -#define EBI_DATA_10 ET024006DHU_EBI_DATA_10 -#define EBI_DATA_11 ET024006DHU_EBI_DATA_11 -#define EBI_DATA_12 ET024006DHU_EBI_DATA_12 -#define EBI_DATA_13 ET024006DHU_EBI_DATA_13 -#define EBI_DATA_14 ET024006DHU_EBI_DATA_14 -#define EBI_DATA_15 ET024006DHU_EBI_DATA_15 - -#if BOARD==EVK1105 -#ifdef EVK1105_REV3 -#define EBI_ADDR_19 AVR32_EBI_ADDR_19 -#define EBI_NCS_2 ET024006DHU_EBI_NCS -#else -#define EBI_ADDR_21 ET024006DHU_EBI_ADDR_21 -#define EBI_NCS_0 ET024006DHU_EBI_NCS -#endif -#elif BOARD == UC3C_EK -#define EBI_ADDR_22 AVR32_EBI_ADDR_22 -#define EBI_NCS_0 ET024006DHU_EBI_NCS -#elif BOARD == EVK1104 -#define EBI_ADDR_21 ET024006DHU_EBI_ADDR_21 -#define EBI_NCS_0 ET024006DHU_EBI_NCS -#endif - - -#define EBI_NWE0 ET024006DHU_EBI_NWE -#define EBI_NRD ET024006DHU_EBI_NRD - -#endif // _CONF_EBI_H_ diff --git a/firmwares/wifishield/wifiHD/src/CONFIG/conf_sd_mmc_spi.h b/firmwares/wifishield/wifiHD/src/CONFIG/conf_sd_mmc_spi.h deleted file mode 100644 index 94b55e1..0000000 --- a/firmwares/wifishield/wifiHD/src/CONFIG/conf_sd_mmc_spi.h +++ /dev/null @@ -1,73 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief SD/MMC configuration file. - * - * This file contains the possible external configuration of the SD/MMC. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices with an SPI module can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _CONF_SD_MMC_SPI_H_ -#define _CONF_SD_MMC_SPI_H_ - - -#include "conf_access.h" - -#if SD_MMC_SPI_MEM == DISABLE - #error conf_sd_mmc_spi.h is #included although SD_MMC_SPI_MEM is disabled -#endif - - -#include "sd_mmc_spi.h" - - -//_____ D E F I N I T I O N S ______________________________________________ - -//! SPI master speed in Hz. -#define SD_MMC_SPI_MASTER_SPEED 12000000 - -//! Number of bits in each SPI transfer. -#define SD_MMC_SPI_BITS 8 - - -#endif // _CONF_SD_MMC_SPI_H_ |