diff options
Diffstat (limited to 'firmwares/wifishield/scripts')
| -rwxr-xr-x | firmwares/wifishield/scripts/ArduinoWifiShield_upgrade.sh | 120 | ||||
| -rwxr-xr-x | firmwares/wifishield/scripts/ArduinoWifiShield_upgrade_mac.sh | 96 |
2 files changed, 0 insertions, 216 deletions
diff --git a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade.sh b/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade.sh deleted file mode 100755 index e3a7d7f..0000000 --- a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade.sh +++ /dev/null @@ -1,120 +0,0 @@ -#!/bin/sh - -WIFI_FW_PATH="/hardware/arduino/avr/firmwares/wifishield/binary" -AVR_TOOLS_PATH="/hardware/tools/avr/bin" - -TARGET_MICRO="at32uc3a1256" - - -progname=$0 - -usage () { -cat <<EOF -Usage: $progname [-a Arduino_path] [-f which_firmware] [-h] - -a set the path where the Arduino IDE is installed - -f the firmware you want to upload, valid parameters are: - shield - to upgrade the WiFi shield firmware - all - to upgrade both firmwares - -h help -EOF - exit 0 -} - -upgradeHDmodule () { - sleep 1 # Give time to the shield to end the boot - echo "****Upgrade HD WiFi module firmware****\n" - dfu-programmer $TARGET_MICRO erase - dfu-programmer $TARGET_MICRO flash --suppress-bootloader-mem $WIFI_FW_PATH/wifi_dnld.hex - dfu-programmer $TARGET_MICRO start - - if [ $? != 0 ] ; then - echo "\nError during device initialization, please close the J3 jumper and press the reset button.\nTry -h for help\n" - exit 1 # if the device is not recognized exit - fi - - echo -n "\nPress the RESET button on the shield then type [ENTER] to upgrade the firmware of the shield..\n" - read readEnter -} - -upgradeShield () { - sleep 1 # Give time to the shield to end the boot - echo "****Upgrade WiFi Shield firmware****\n" - dfu-programmer $TARGET_MICRO erase - dfu-programmer $TARGET_MICRO flash --suppress-bootloader-mem $WIFI_FW_PATH/wifiHD.hex - dfu-programmer $TARGET_MICRO start - - if [ $? != 0 ] ; then - echo "\nError during device initialization, please close the J3 jumper and press the reset button.\nTry -h for help\n" - exit 1 # if the device is not recognized exit - fi - - echo "\nDone. Remove the J3 jumper and press the RESET button on the shield." - echo "Thank you!\n" -} - - -cat <<EOF - - Arduino WiFi Shield upgrade -========================================= -Instructions: - -To access to the USB devices correctly, the dfu-programmer needs to have the root permissions. - -You can upgrade the firmware of the antenna togheter with the shield firmware or only the shield firmware -if there aren't changes on the antenna firmware. - -Use the '-h' parameter for help -========================================= - -EOF - -if [ $USER = 'root' ] ; then #check if the current user is root - while getopts ":a:f:h" opt; do - case $opt in - a) - ARDUINO_PATH=$OPTARG - WIFI_FW_PATH=$ARDUINO_PATH$WIFI_FW_PATH - AVR_TOOLS_PATH=$ARDUINO_PATH$AVR_TOOLS_PATH - cd $AVR_TOOLS_PATH - ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifi_dnld.elf $WIFI_FW_PATH/wifi_dnld.hex - ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifiHD.elf $WIFI_FW_PATH/wifiHD.hex - ;; - f) - if [ "$ARDUINO_PATH" != "" ] ; then - if [ "$OPTARG" = "all" ] ; then - upgradeHDmodule - upgradeShield - exit 0 - else - if [ "$OPTARG" = "shield" ] ; then - upgradeShield - exit 0 - else - echo "invalid parameter for the -f [firmware] option, please retry." - echo "Type -h for help\n" - exit 1 - fi - fi - else - echo "Arduino Path not setted. Retry...\n" - fi - ;; - h) - usage ;; - \?) - echo "Invalid option: $OPTARG" >&2 - usage - exit 1 - ;; - :) - echo "Option -$OPTARG requires an argument." >&2 - exit 1 - ;; - esac - done -else - echo "Please retry running the script as root.\n" -fi - -shift $(($OPTIND - 1)) diff --git a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade_mac.sh b/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade_mac.sh deleted file mode 100755 index dadaf29..0000000 --- a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade_mac.sh +++ /dev/null @@ -1,96 +0,0 @@ -#!/bin/sh - -WIFI_FW_PATH="/hardware/arduino/avr/firmwares/wifishield/binary" -AVR_TOOLS_PATH="/hardware/tools/avr/bin" - -progname=$0 - -usage () { -cat <<EOF -Usage: $progname [-a Arduino_path] [-f which_firmware] [-h] - -a set the path where the Arduino IDE is installed - -f the firmware you want to upload, valid parameters are: - shield - to upgrade the WiFi shield firmware - all - to upgrade both firmwares - -h help -EOF - exit 0 -} - -upgradeHDmodule () { - sleep 1 # Give time to the shield to end the boot - echo "****Upgrade HD WiFi module firmware****\n" - dfu-programmer at32uc3a1256 erase - dfu-programmer at32uc3a1256 flash --suppress-bootloader-mem $WIFI_FW_PATH/wifi_dnld.hex - dfu-programmer at32uc3a1256 start - echo -n "\nRemove the J3 jumper then press the RESET button on the shield then type [ENTER] to upgrade the firmware of the shield..\n" - read readEnter -} - -upgradeShield () { - sleep 1 # Give time to the shield to end the boot - echo "****Upgrade WiFi Shield firmware****\n" - dfu-programmer at32uc3a1256 erase - dfu-programmer at32uc3a1256 flash --suppress-bootloader-mem $WIFI_FW_PATH/wifiHD.hex - dfu-programmer at32uc3a1256 start - echo "\nDone. Remove the J3 jumper and press the RESET button on the shield." - echo "Thank you!\n" -} - -cat <<EOF - - Arduino WiFi Shield upgrade -========================================= -Disclaimer: to access to the USB devices correctly, the dfu-programmer needs to be used as root. Run this script as root. - -EOF - -if [ $USER = 'root' ] ; then #check if the current user is root - while getopts ":a:f:h" opt; do - case $opt in - a) - ARDUINO_PATH=$OPTARG - WIFI_FW_PATH=$ARDUINO_PATH$WIFI_FW_PATH - AVR_TOOLS_PATH=$ARDUINO_PATH$AVR_TOOLS_PATH - cd $AVR_TOOLS_PATH - ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifi_dnld.elf $WIFI_FW_PATH/wifi_dnld.hex - ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifiHD.elf $WIFI_FW_PATH/wifiHD.hex - ;; - f) - if [ "$ARDUINO_PATH" != "" ] ; then - if [ "$OPTARG" = "all" ] ; then - upgradeHDmodule - upgradeShield - exit 0 - else - if [ "$OPTARG" = "shield" ] ; then - upgradeShield - exit 0 - else - echo "invalid parameter for the -f [firmware] option, please retry." - echo "Type -h for help\n" - exit 1 - fi - fi - else - echo "Arduino Path not setted. Retry...\n" - fi - ;; - h) - usage ;; - \?) - echo "Invalid option: $OPTARG" >&2 - usage - exit 1 - ;; - :) - echo "Option -$OPTARG requires an argument." >&2 - exit 1 - ;; - esac - done -else - echo "You are not root!\n" -fi - -shift $(($OPTIND - 1)) |