diff options
Diffstat (limited to 'firmwares/atmegaxxu2/README.txt')
| -rw-r--r-- | firmwares/atmegaxxu2/README.txt | 33 |
1 files changed, 0 insertions, 33 deletions
diff --git a/firmwares/atmegaxxu2/README.txt b/firmwares/atmegaxxu2/README.txt deleted file mode 100644 index 386dcf0..0000000 --- a/firmwares/atmegaxxu2/README.txt +++ /dev/null @@ -1,33 +0,0 @@ -Arduino Uno and Mega 2560 Firmwares for the ATmega8U2 - -This directory contains the firmwares used on the ATmega8U2 on the Arduino -Uno and Arduino Mega 2560. The arduino-usbdfu directory contains the DFU -bootloader on the 8U2; the arduino-usbserial directory contains the actual -usb to serial firmware. Both should be compiled against LUFA 100807. The -two .hex files in this directory combine the dfu and serial firmwares into -a single file to burn onto the 8U2. - -To burn (Uno): -avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:UNO-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m - -To burn (Mega 2560): -avrdude -p at90usb82 -F -P usb -c avrispmkii -U flash:w:MEGA-dfu_and_usbserial_combined.hex -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m - - -Note on USB Vendor IDs (VID) and Product IDs (PID): The arduino-usbdfu -project uses Atmel's VID and MCU-specific PIDs to maintain compatibility -with their FLIP software. The source code to the arduino-usbserial -project includes Atmel's VID and a PID donated by them to LUFA. This -PID is used in LUFA's USBtoSerial project, which forms the basis for -arduino-usbserial. According to the LUFA documentation, this VID/PID -combination is: - - "For use in testing of LUFA powered devices during development only, - by non-commercial entities. All devices must accept collisions on this - VID/PID range (from other in-development LUFA devices) to be resolved - by using a unique release number in the Device Descriptor. No devices - using this VID/PID combination may be released to the general public." - -The production version of the arduino-usbserial firmware uses the -Arduino VID. This is only for use with official Arduino hardware and -should not be used on other products.
\ No newline at end of file |