diff options
Diffstat (limited to 'cores/arduino')
36 files changed, 899 insertions, 1106 deletions
diff --git a/cores/arduino/Arduino.h b/cores/arduino/Arduino.h index 8673ab8..ac775f1 100755..100644 --- a/cores/arduino/Arduino.h +++ b/cores/arduino/Arduino.h @@ -21,6 +21,7 @@ #define Arduino_h #include <stdlib.h> +#include <stdbool.h> #include <string.h> #include <math.h> @@ -34,6 +35,8 @@ extern "C"{ #endif +void yield(void); + #define HIGH 0x1 #define LOW 0x0 @@ -41,14 +44,12 @@ extern "C"{ #define OUTPUT 0x1 #define INPUT_PULLUP 0x2 -#define true 0x1 -#define false 0x0 - #define PI 3.1415926535897932384626433832795 #define HALF_PI 1.5707963267948966192313216916398 #define TWO_PI 6.283185307179586476925286766559 #define DEG_TO_RAD 0.017453292519943295769236907684886 #define RAD_TO_DEG 57.295779513082320876798154814105 +#define EULER 2.718281828459045235360287471352 #define SERIAL 0x0 #define DISPLAY 0x1 @@ -104,6 +105,10 @@ extern "C"{ #define bitClear(value, bit) ((value) &= ~(1UL << (bit))) #define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) +// avr-libc defines _NOP() since 1.6.2 +#ifndef _NOP +#define _NOP() do { __asm__ volatile ("nop"); } while (0) +#endif typedef unsigned int word; @@ -171,6 +176,8 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; #define NOT_A_PIN 0 #define NOT_A_PORT 0 +#define NOT_AN_INTERRUPT -1 + #ifdef ARDUINO_MAIN #define PA 1 #define PB 2 @@ -190,20 +197,21 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; #define TIMER0B 2 #define TIMER1A 3 #define TIMER1B 4 -#define TIMER2 5 -#define TIMER2A 6 -#define TIMER2B 7 - -#define TIMER3A 8 -#define TIMER3B 9 -#define TIMER3C 10 -#define TIMER4A 11 -#define TIMER4B 12 -#define TIMER4C 13 -#define TIMER4D 14 -#define TIMER5A 15 -#define TIMER5B 16 -#define TIMER5C 17 +#define TIMER1C 5 +#define TIMER2 6 +#define TIMER2A 7 +#define TIMER2B 8 + +#define TIMER3A 9 +#define TIMER3B 10 +#define TIMER3C 11 +#define TIMER4A 12 +#define TIMER4B 13 +#define TIMER4C 14 +#define TIMER4D 15 +#define TIMER5A 16 +#define TIMER5B 17 +#define TIMER5C 18 #ifdef __cplusplus } // extern "C" @@ -213,6 +221,10 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; #include "WCharacter.h" #include "WString.h" #include "HardwareSerial.h" +#include "USBAPI.h" +#if defined(HAVE_HWSERIAL0) && defined(HAVE_CDCSERIAL) +#error "Targets with both UART0 and CDC serial not supported" +#endif uint16_t makeWord(uint16_t w); uint16_t makeWord(byte h, byte l); diff --git a/cores/arduino/CDC.cpp b/cores/arduino/CDC.cpp index aae91c2..5d4f2a0 100644 --- a/cores/arduino/CDC.cpp +++ b/cores/arduino/CDC.cpp @@ -16,7 +16,6 @@ ** SOFTWARE. */ -#include "Platform.h" #include "USBAPI.h" #include <avr/wdt.h> @@ -80,46 +79,50 @@ bool WEAK CDC_Setup(Setup& setup) if (CDC_SET_LINE_CODING == r) { USB_RecvControl((void*)&_usbLineInfo,7); - return true; } if (CDC_SET_CONTROL_LINE_STATE == r) { _usbLineInfo.lineState = setup.wValueL; + } + if (CDC_SET_LINE_CODING == r || CDC_SET_CONTROL_LINE_STATE == r) + { // auto-reset into the bootloader is triggered when the port, already // open at 1200 bps, is closed. this is the signal to start the watchdog // with a relatively long period so it can finish housekeeping tasks // like servicing endpoints before the sketch ends - if (1200 == _usbLineInfo.dwDTERate) { - // We check DTR state to determine if host port is open (bit 0 of lineState). - if ((_usbLineInfo.lineState & 0x01) == 0) { - *(uint16_t *)0x0800 = 0x7777; - wdt_enable(WDTO_120MS); - } else { - // Most OSs do some intermediate steps when configuring ports and DTR can - // twiggle more than once before stabilizing. - // To avoid spurious resets we set the watchdog to 250ms and eventually - // cancel if DTR goes back high. - - wdt_disable(); - wdt_reset(); - *(uint16_t *)0x0800 = 0x0; - } + + // We check DTR state to determine if host port is open (bit 0 of lineState). + if (1200 == _usbLineInfo.dwDTERate && (_usbLineInfo.lineState & 0x01) == 0) + { + *(uint16_t *)0x0800 = 0x7777; + wdt_enable(WDTO_120MS); + } + else + { + // Most OSs do some intermediate steps when configuring ports and DTR can + // twiggle more than once before stabilizing. + // To avoid spurious resets we set the watchdog to 250ms and eventually + // cancel if DTR goes back high. + + wdt_disable(); + wdt_reset(); + *(uint16_t *)0x0800 = 0x0; } - return true; } + return true; } return false; } -void Serial_::begin(unsigned long baud_count) +void Serial_::begin(unsigned long /* baud_count */) { peek_buffer = -1; } -void Serial_::begin(unsigned long baud_count, byte config) +void Serial_::begin(unsigned long /* baud_count */, byte /* config */) { peek_buffer = -1; } diff --git a/cores/arduino/HID.cpp b/cores/arduino/HID.cpp index 553b746..75c37b2 100644 --- a/cores/arduino/HID.cpp +++ b/cores/arduino/HID.cpp @@ -16,9 +16,7 @@ ** SOFTWARE. */ -#include "Platform.h" #include "USBAPI.h" -#include "USBDesc.h" #if defined(USBCON) #ifdef HID_ENABLED @@ -151,7 +149,7 @@ int WEAK HID_GetInterface(u8* interfaceNum) return USB_SendControl(TRANSFER_PGM,&_hidInterface,sizeof(_hidInterface)); } -int WEAK HID_GetDescriptor(int i) +int WEAK HID_GetDescriptor(int /* i */) { return USB_SendControl(TRANSFER_PGM,_hidReportDescriptor,sizeof(_hidReportDescriptor)); } @@ -510,9 +508,9 @@ void Keyboard_::releaseAll(void) size_t Keyboard_::write(uint8_t c) { - uint8_t p = press(c); // Keydown - uint8_t r = release(c); // Keyup - return (p); // just return the result of press() since release() almost always returns 1 + uint8_t p = press(c); // Keydown + release(c); // Keyup + return p; // just return the result of press() since release() almost always returns 1 } #endif diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp index 1a2f8ce..29a3366 100644 --- a/cores/arduino/HardwareSerial.cpp +++ b/cores/arduino/HardwareSerial.cpp @@ -19,6 +19,7 @@ Modified 23 November 2006 by David A. Mellis Modified 28 September 2010 by Mark Sproul Modified 14 August 2012 by Alarus + Modified 3 December 2013 by Matthijs Kooijman */ #include <stdlib.h> @@ -26,483 +27,226 @@ #include <string.h> #include <inttypes.h> #include "Arduino.h" -#include "wiring_private.h" - -// this next line disables the entire HardwareSerial.cpp, -// this is so I can support Attiny series and any other chip without a uart -#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) #include "HardwareSerial.h" +#include "HardwareSerial_private.h" -/* - * on ATmega8, the uart and its bits are not numbered, so there is no "TXC0" - * definition. - */ -#if !defined(TXC0) -#if defined(TXC) -#define TXC0 TXC -#elif defined(TXC1) -// Some devices have uart1 but no uart0 -#define TXC0 TXC1 -#else -#error TXC0 not definable in HardwareSerial.h -#endif -#endif - -// Define constants and variables for buffering incoming serial data. We're -// using a ring buffer (I think), in which head is the index of the location -// to which to write the next incoming character and tail is the index of the -// location from which to read. -#if (RAMEND < 1000) - #define SERIAL_BUFFER_SIZE 16 -#else - #define SERIAL_BUFFER_SIZE 64 -#endif - -struct ring_buffer -{ - unsigned char buffer[SERIAL_BUFFER_SIZE]; - volatile unsigned int head; - volatile unsigned int tail; -}; - -#if defined(USBCON) - ring_buffer rx_buffer = { { 0 }, 0, 0}; - ring_buffer tx_buffer = { { 0 }, 0, 0}; -#endif -#if defined(UBRRH) || defined(UBRR0H) - ring_buffer rx_buffer = { { 0 }, 0, 0 }; - ring_buffer tx_buffer = { { 0 }, 0, 0 }; -#endif -#if defined(UBRR1H) - ring_buffer rx_buffer1 = { { 0 }, 0, 0 }; - ring_buffer tx_buffer1 = { { 0 }, 0, 0 }; -#endif -#if defined(UBRR2H) - ring_buffer rx_buffer2 = { { 0 }, 0, 0 }; - ring_buffer tx_buffer2 = { { 0 }, 0, 0 }; -#endif -#if defined(UBRR3H) - ring_buffer rx_buffer3 = { { 0 }, 0, 0 }; - ring_buffer tx_buffer3 = { { 0 }, 0, 0 }; -#endif - -inline void store_char(unsigned char c, ring_buffer *buffer) -{ - int i = (unsigned int)(buffer->head + 1) % SERIAL_BUFFER_SIZE; - - // if we should be storing the received character into the location - // just before the tail (meaning that the head would advance to the - // current location of the tail), we're about to overflow the buffer - // and so we don't write the character or advance the head. - if (i != buffer->tail) { - buffer->buffer[buffer->head] = c; - buffer->head = i; - } -} - -#if !defined(USART0_RX_vect) && defined(USART1_RX_vect) -// do nothing - on the 32u4 the first USART is USART1 -#else -#if !defined(USART_RX_vect) && !defined(USART0_RX_vect) && \ - !defined(USART_RXC_vect) - #error "Don't know what the Data Received vector is called for the first UART" -#else +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(HAVE_HWSERIAL0) || defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3) + +// SerialEvent functions are weak, so when the user doesn't define them, +// the linker just sets their address to 0 (which is checked below). +// The Serialx_available is just a wrapper around Serialx.available(), +// but we can refer to it weakly so we don't pull in the entire +// HardwareSerial instance if the user doesn't also refer to it. +#if defined(HAVE_HWSERIAL0) void serialEvent() __attribute__((weak)); - void serialEvent() {} - #define serialEvent_implemented -#if defined(USART_RX_vect) - ISR(USART_RX_vect) -#elif defined(USART0_RX_vect) - ISR(USART0_RX_vect) -#elif defined(USART_RXC_vect) - ISR(USART_RXC_vect) // ATmega8 -#endif - { - #if defined(UDR0) - if (bit_is_clear(UCSR0A, UPE0)) { - unsigned char c = UDR0; - store_char(c, &rx_buffer); - } else { - unsigned char c = UDR0; - }; - #elif defined(UDR) - if (bit_is_clear(UCSRA, PE)) { - unsigned char c = UDR; - store_char(c, &rx_buffer); - } else { - unsigned char c = UDR; - }; - #else - #error UDR not defined - #endif - } -#endif + bool Serial0_available() __attribute__((weak)); #endif -#if defined(USART1_RX_vect) +#if defined(HAVE_HWSERIAL1) void serialEvent1() __attribute__((weak)); - void serialEvent1() {} - #define serialEvent1_implemented - ISR(USART1_RX_vect) - { - if (bit_is_clear(UCSR1A, UPE1)) { - unsigned char c = UDR1; - store_char(c, &rx_buffer1); - } else { - unsigned char c = UDR1; - }; - } + bool Serial1_available() __attribute__((weak)); #endif -#if defined(USART2_RX_vect) && defined(UDR2) +#if defined(HAVE_HWSERIAL2) void serialEvent2() __attribute__((weak)); - void serialEvent2() {} - #define serialEvent2_implemented - ISR(USART2_RX_vect) - { - if (bit_is_clear(UCSR2A, UPE2)) { - unsigned char c = UDR2; - store_char(c, &rx_buffer2); - } else { - unsigned char c = UDR2; - }; - } + bool Serial2_available() __attribute__((weak)); #endif -#if defined(USART3_RX_vect) && defined(UDR3) +#if defined(HAVE_HWSERIAL3) void serialEvent3() __attribute__((weak)); - void serialEvent3() {} - #define serialEvent3_implemented - ISR(USART3_RX_vect) - { - if (bit_is_clear(UCSR3A, UPE3)) { - unsigned char c = UDR3; - store_char(c, &rx_buffer3); - } else { - unsigned char c = UDR3; - }; - } + bool Serial3_available() __attribute__((weak)); #endif void serialEventRun(void) { -#ifdef serialEvent_implemented - if (Serial.available()) serialEvent(); +#if defined(HAVE_HWSERIAL0) + if (Serial0_available && serialEvent && Serial0_available()) serialEvent(); #endif -#ifdef serialEvent1_implemented - if (Serial1.available()) serialEvent1(); +#if defined(HAVE_HWSERIAL1) + if (Serial1_available && serialEvent1 && Serial1_available()) serialEvent1(); #endif -#ifdef serialEvent2_implemented - if (Serial2.available()) serialEvent2(); +#if defined(HAVE_HWSERIAL2) + if (Serial2_available && serialEvent2 && Serial2_available()) serialEvent2(); #endif -#ifdef serialEvent3_implemented - if (Serial3.available()) serialEvent3(); +#if defined(HAVE_HWSERIAL3) + if (Serial3_available && serialEvent3 && Serial3_available()) serialEvent3(); #endif } +// Actual interrupt handlers ////////////////////////////////////////////////////////////// -#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect) -// do nothing - on the 32u4 the first USART is USART1 -#else -#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect) - #error "Don't know what the Data Register Empty vector is called for the first UART" -#else -#if defined(UART0_UDRE_vect) -ISR(UART0_UDRE_vect) -#elif defined(UART_UDRE_vect) -ISR(UART_UDRE_vect) -#elif defined(USART0_UDRE_vect) -ISR(USART0_UDRE_vect) -#elif defined(USART_UDRE_vect) -ISR(USART_UDRE_vect) -#endif +void HardwareSerial::_tx_udr_empty_irq(void) { - if (tx_buffer.head == tx_buffer.tail) { - // Buffer empty, so disable interrupts -#if defined(UCSR0B) - cbi(UCSR0B, UDRIE0); -#else - cbi(UCSRB, UDRIE); -#endif - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer.buffer[tx_buffer.tail]; - tx_buffer.tail = (tx_buffer.tail + 1) % SERIAL_BUFFER_SIZE; - - #if defined(UDR0) - UDR0 = c; - #elif defined(UDR) - UDR = c; - #else - #error UDR not defined - #endif - } -} -#endif -#endif + // If interrupts are enabled, there must be more data in the output + // buffer. Send the next byte + unsigned char c = _tx_buffer[_tx_buffer_tail]; + _tx_buffer_tail = (_tx_buffer_tail + 1) % SERIAL_TX_BUFFER_SIZE; -#ifdef USART1_UDRE_vect -ISR(USART1_UDRE_vect) -{ - if (tx_buffer1.head == tx_buffer1.tail) { - // Buffer empty, so disable interrupts - cbi(UCSR1B, UDRIE1); - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer1.buffer[tx_buffer1.tail]; - tx_buffer1.tail = (tx_buffer1.tail + 1) % SERIAL_BUFFER_SIZE; - - UDR1 = c; - } -} -#endif + *_udr = c; -#ifdef USART2_UDRE_vect -ISR(USART2_UDRE_vect) -{ - if (tx_buffer2.head == tx_buffer2.tail) { - // Buffer empty, so disable interrupts - cbi(UCSR2B, UDRIE2); - } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer2.buffer[tx_buffer2.tail]; - tx_buffer2.tail = (tx_buffer2.tail + 1) % SERIAL_BUFFER_SIZE; - - UDR2 = c; - } -} -#endif + // clear the TXC bit -- "can be cleared by writing a one to its bit + // location". This makes sure flush() won't return until the bytes + // actually got written + sbi(*_ucsra, TXC0); -#ifdef USART3_UDRE_vect -ISR(USART3_UDRE_vect) -{ - if (tx_buffer3.head == tx_buffer3.tail) { - // Buffer empty, so disable interrupts - cbi(UCSR3B, UDRIE3); + if (_tx_buffer_head == _tx_buffer_tail) { + // Buffer empty, so disable interrupts + cbi(*_ucsrb, UDRIE0); } - else { - // There is more data in the output buffer. Send the next byte - unsigned char c = tx_buffer3.buffer[tx_buffer3.tail]; - tx_buffer3.tail = (tx_buffer3.tail + 1) % SERIAL_BUFFER_SIZE; - - UDR3 = c; - } -} -#endif - - -// Constructors //////////////////////////////////////////////////////////////// - -HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer, - volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, - volatile uint8_t *ucsra, volatile uint8_t *ucsrb, - volatile uint8_t *ucsrc, volatile uint8_t *udr, - uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x) -{ - _rx_buffer = rx_buffer; - _tx_buffer = tx_buffer; - _ubrrh = ubrrh; - _ubrrl = ubrrl; - _ucsra = ucsra; - _ucsrb = ucsrb; - _ucsrc = ucsrc; - _udr = udr; - _rxen = rxen; - _txen = txen; - _rxcie = rxcie; - _udrie = udrie; - _u2x = u2x; } // Public Methods ////////////////////////////////////////////////////////////// -void HardwareSerial::begin(unsigned long baud) -{ - uint16_t baud_setting; - bool use_u2x = true; - -#if F_CPU == 16000000UL - // hardcoded exception for compatibility with the bootloader shipped - // with the Duemilanove and previous boards and the firmware on the 8U2 - // on the Uno and Mega 2560. - if (baud == 57600) { - use_u2x = false; - } -#endif - -try_again: - - if (use_u2x) { - *_ucsra = 1 << _u2x; - baud_setting = (F_CPU / 4 / baud - 1) / 2; - } else { - *_ucsra = 0; - baud_setting = (F_CPU / 8 / baud - 1) / 2; - } - - if ((baud_setting > 4095) && use_u2x) - { - use_u2x = false; - goto try_again; - } - - // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) - *_ubrrh = baud_setting >> 8; - *_ubrrl = baud_setting; - - transmitting = false; - - sbi(*_ucsrb, _rxen); - sbi(*_ucsrb, _txen); - sbi(*_ucsrb, _rxcie); - cbi(*_ucsrb, _udrie); -} - void HardwareSerial::begin(unsigned long baud, byte config) { - uint16_t baud_setting; - uint8_t current_config; - bool use_u2x = true; - -#if F_CPU == 16000000UL - // hardcoded exception for compatibility with the bootloader shipped - // with the Duemilanove and previous boards and the firmware on the 8U2 - // on the Uno and Mega 2560. - if (baud == 57600) { - use_u2x = false; - } -#endif + // Try u2x mode first + uint16_t baud_setting = (F_CPU / 4 / baud - 1) / 2; + *_ucsra = 1 << U2X0; -try_again: - - if (use_u2x) { - *_ucsra = 1 << _u2x; - baud_setting = (F_CPU / 4 / baud - 1) / 2; - } else { + // hardcoded exception for 57600 for compatibility with the bootloader + // shipped with the Duemilanove and previous boards and the firmware + // on the 8U2 on the Uno and Mega 2560. Also, The baud_setting cannot + // be > 4095, so switch back to non-u2x mode if the baud rate is too + // low. + if (((F_CPU == 16000000UL) && (baud == 57600)) || (baud_setting >4095)) + { *_ucsra = 0; baud_setting = (F_CPU / 8 / baud - 1) / 2; } - - if ((baud_setting > 4095) && use_u2x) - { - use_u2x = false; - goto try_again; - } - // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + // assign the baud_setting, a.k.a. ubrr (USART Baud Rate Register) *_ubrrh = baud_setting >> 8; *_ubrrl = baud_setting; + _written = false; + //set the data bits, parity, and stop bits #if defined(__AVR_ATmega8__) config |= 0x80; // select UCSRC register (shared with UBRRH) #endif *_ucsrc = config; - sbi(*_ucsrb, _rxen); - sbi(*_ucsrb, _txen); - sbi(*_ucsrb, _rxcie); - cbi(*_ucsrb, _udrie); + sbi(*_ucsrb, RXEN0); + sbi(*_ucsrb, TXEN0); + sbi(*_ucsrb, RXCIE0); + cbi(*_ucsrb, UDRIE0); } void HardwareSerial::end() { // wait for transmission of outgoing data - while (_tx_buffer->head != _tx_buffer->tail) + while (_tx_buffer_head != _tx_buffer_tail) ; - cbi(*_ucsrb, _rxen); - cbi(*_ucsrb, _txen); - cbi(*_ucsrb, _rxcie); - cbi(*_ucsrb, _udrie); + cbi(*_ucsrb, RXEN0); + cbi(*_ucsrb, TXEN0); + cbi(*_ucsrb, RXCIE0); + cbi(*_ucsrb, UDRIE0); // clear any received data - _rx_buffer->head = _rx_buffer->tail; + _rx_buffer_head = _rx_buffer_tail; } int HardwareSerial::available(void) { - return (int)(SERIAL_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % SERIAL_BUFFER_SIZE; + return (int)(SERIAL_RX_BUFFER_SIZE + _rx_buffer_head - _rx_buffer_tail) % SERIAL_RX_BUFFER_SIZE; } int HardwareSerial::peek(void) { - if (_rx_buffer->head == _rx_buffer->tail) { + if (_rx_buffer_head == _rx_buffer_tail) { return -1; } else { - return _rx_buffer->buffer[_rx_buffer->tail]; + return _rx_buffer[_rx_buffer_tail]; } } int HardwareSerial::read(void) { // if the head isn't ahead of the tail, we don't have any characters - if (_rx_buffer->head == _rx_buffer->tail) { + if (_rx_buffer_head == _rx_buffer_tail) { return -1; } else { - unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; - _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % SERIAL_BUFFER_SIZE; + unsigned char c = _rx_buffer[_rx_buffer_tail]; + _rx_buffer_tail = (rx_buffer_index_t)(_rx_buffer_tail + 1) % SERIAL_RX_BUFFER_SIZE; return c; } } +int HardwareSerial::availableForWrite(void) +{ +#if (SERIAL_TX_BUFFER_SIZE>256) + uint8_t oldSREG = SREG; + cli(); +#endif + tx_buffer_index_t head = _tx_buffer_head; + tx_buffer_index_t tail = _tx_buffer_tail; +#if (SERIAL_TX_BUFFER_SIZE>256) + SREG = oldSREG; +#endif + if (head >= tail) return SERIAL_TX_BUFFER_SIZE - 1 - head + tail; + return tail - head - 1; +} + void HardwareSerial::flush() { - // UDR is kept full while the buffer is not empty, so TXC triggers when EMPTY && SENT - while (transmitting && ! (*_ucsra & _BV(TXC0))); - transmitting = false; + // If we have never written a byte, no need to flush. This special + // case is needed since there is no way to force the TXC (transmit + // complete) bit to 1 during initialization + if (!_written) + return; + + while (bit_is_set(*_ucsrb, UDRIE0) || bit_is_clear(*_ucsra, TXC0)) { + if (bit_is_clear(SREG, SREG_I) && bit_is_set(*_ucsrb, UDRIE0)) + // Interrupts are globally disabled, but the DR empty + // interrupt should be enabled, so poll the DR empty flag to + // prevent deadlock + if (bit_is_set(*_ucsra, UDRE0)) + _tx_udr_empty_irq(); + } + // If we get here, nothing is queued anymore (DRIE is disabled) and + // the hardware finished tranmission (TXC is set). } size_t HardwareSerial::write(uint8_t c) { - int i = (_tx_buffer->head + 1) % SERIAL_BUFFER_SIZE; + // If the buffer and the data register is empty, just write the byte + // to the data register and be done. This shortcut helps + // significantly improve the effective datarate at high (> + // 500kbit/s) bitrates, where interrupt overhead becomes a slowdown. + if (_tx_buffer_head == _tx_buffer_tail && bit_is_set(*_ucsra, UDRE0)) { + *_udr = c; + sbi(*_ucsra, TXC0); + return 1; + } + tx_buffer_index_t i = (_tx_buffer_head + 1) % SERIAL_TX_BUFFER_SIZE; // If the output buffer is full, there's nothing for it other than to // wait for the interrupt handler to empty it a bit - // ???: return 0 here instead? - while (i == _tx_buffer->tail) - ; - - _tx_buffer->buffer[_tx_buffer->head] = c; - _tx_buffer->head = i; + while (i == _tx_buffer_tail) { + if (bit_is_clear(SREG, SREG_I)) { + // Interrupts are disabled, so we'll have to poll the data + // register empty flag ourselves. If it is set, pretend an + // interrupt has happened and call the handler to free up + // space for us. + if(bit_is_set(*_ucsra, UDRE0)) + _tx_udr_empty_irq(); + } else { + // nop, the interrupt handler will free up space for us + } + } + + _tx_buffer[_tx_buffer_head] = c; + _tx_buffer_head = i; - sbi(*_ucsrb, _udrie); - // clear the TXC bit -- "can be cleared by writing a one to its bit location" - transmitting = true; - sbi(*_ucsra, TXC0); + sbi(*_ucsrb, UDRIE0); + _written = true; return 1; } -HardwareSerial::operator bool() { - return true; -} - -// Preinstantiate Objects ////////////////////////////////////////////////////// - -#if defined(UBRRH) && defined(UBRRL) - HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR, RXEN, TXEN, RXCIE, UDRIE, U2X); -#elif defined(UBRR0H) && defined(UBRR0L) - HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0, RXEN0, TXEN0, RXCIE0, UDRIE0, U2X0); -#elif defined(USBCON) - // do nothing - Serial object and buffers are initialized in CDC code -#else - #error no serial port defined (port 0) -#endif - -#if defined(UBRR1H) - HardwareSerial Serial1(&rx_buffer1, &tx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1, RXEN1, TXEN1, RXCIE1, UDRIE1, U2X1); -#endif -#if defined(UBRR2H) - HardwareSerial Serial2(&rx_buffer2, &tx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2, RXEN2, TXEN2, RXCIE2, UDRIE2, U2X2); -#endif -#if defined(UBRR3H) - HardwareSerial Serial3(&rx_buffer3, &tx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3); -#endif #endif // whole file - diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h index a73117f..935934b 100644 --- a/cores/arduino/HardwareSerial.h +++ b/cores/arduino/HardwareSerial.h @@ -18,6 +18,7 @@ Modified 28 September 2010 by Mark Sproul Modified 14 August 2012 by Alarus + Modified 3 December 2013 by Matthijs Kooijman */ #ifndef HardwareSerial_h @@ -27,46 +28,29 @@ #include "Stream.h" -struct ring_buffer; - -class HardwareSerial : public Stream -{ - private: - ring_buffer *_rx_buffer; - ring_buffer *_tx_buffer; - volatile uint8_t *_ubrrh; - volatile uint8_t *_ubrrl; - volatile uint8_t *_ucsra; - volatile uint8_t *_ucsrb; - volatile uint8_t *_ucsrc; - volatile uint8_t *_udr; - uint8_t _rxen; - uint8_t _txen; - uint8_t _rxcie; - uint8_t _udrie; - uint8_t _u2x; - bool transmitting; - public: - HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer, - volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, - volatile uint8_t *ucsra, volatile uint8_t *ucsrb, - volatile uint8_t *ucsrc, volatile uint8_t *udr, - uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x); - void begin(unsigned long); - void begin(unsigned long, uint8_t); - void end(); - virtual int available(void); - virtual int peek(void); - virtual int read(void); - virtual void flush(void); - virtual size_t write(uint8_t); - inline size_t write(unsigned long n) { return write((uint8_t)n); } - inline size_t write(long n) { return write((uint8_t)n); } - inline size_t write(unsigned int n) { return write((uint8_t)n); } - inline size_t write(int n) { return write((uint8_t)n); } - using Print::write; // pull in write(str) and write(buf, size) from Print - operator bool(); -}; +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which head is the index of the location +// to which to write the next incoming character and tail is the index of the +// location from which to read. +#if !(defined(SERIAL_TX_BUFFER_SIZE) && defined(SERIAL_RX_BUFFER_SIZE)) +#if (RAMEND < 1000) +#define SERIAL_TX_BUFFER_SIZE 16 +#define SERIAL_RX_BUFFER_SIZE 16 +#else +#define SERIAL_TX_BUFFER_SIZE 64 +#define SERIAL_RX_BUFFER_SIZE 64 +#endif +#endif +#if (SERIAL_TX_BUFFER_SIZE>256) +typedef uint16_t tx_buffer_index_t; +#else +typedef uint8_t tx_buffer_index_t; +#endif +#if (SERIAL_RX_BUFFER_SIZE>256) +typedef uint16_t rx_buffer_index_t; +#else +typedef uint8_t rx_buffer_index_t; +#endif // Define config for Serial.begin(baud, config); #define SERIAL_5N1 0x00 @@ -94,20 +78,70 @@ class HardwareSerial : public Stream #define SERIAL_7O2 0x3C #define SERIAL_8O2 0x3E +class HardwareSerial : public Stream +{ + protected: + volatile uint8_t * const _ubrrh; + volatile uint8_t * const _ubrrl; + volatile uint8_t * const _ucsra; + volatile uint8_t * const _ucsrb; + volatile uint8_t * const _ucsrc; + volatile uint8_t * const _udr; + // Has any byte been written to the UART since begin() + bool _written; + + volatile rx_buffer_index_t _rx_buffer_head; + volatile rx_buffer_index_t _rx_buffer_tail; + volatile tx_buffer_index_t _tx_buffer_head; + volatile tx_buffer_index_t _tx_buffer_tail; + + // Don't put any members after these buffers, since only the first + // 32 bytes of this struct can be accessed quickly using the ldd + // instruction. + unsigned char _rx_buffer[SERIAL_RX_BUFFER_SIZE]; + unsigned char _tx_buffer[SERIAL_TX_BUFFER_SIZE]; + + public: + inline HardwareSerial( + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *ucsrc, volatile uint8_t *udr); + void begin(unsigned long baud) { begin(baud, SERIAL_8N1); } + void begin(unsigned long, uint8_t); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + int availableForWrite(void); + virtual void flush(void); + virtual size_t write(uint8_t); + inline size_t write(unsigned long n) { return write((uint8_t)n); } + inline size_t write(long n) { return write((uint8_t)n); } + inline size_t write(unsigned int n) { return write((uint8_t)n); } + inline size_t write(int n) { return write((uint8_t)n); } + using Print::write; // pull in write(str) and write(buf, size) from Print + operator bool() { return true; } + + // Interrupt handlers - Not intended to be called externally + inline void _rx_complete_irq(void); + void _tx_udr_empty_irq(void); +}; + #if defined(UBRRH) || defined(UBRR0H) extern HardwareSerial Serial; -#elif defined(USBCON) - #include "USBAPI.h" -// extern HardwareSerial Serial_; + #define HAVE_HWSERIAL0 #endif #if defined(UBRR1H) extern HardwareSerial Serial1; + #define HAVE_HWSERIAL1 #endif #if defined(UBRR2H) extern HardwareSerial Serial2; + #define HAVE_HWSERIAL2 #endif #if defined(UBRR3H) extern HardwareSerial Serial3; + #define HAVE_HWSERIAL3 #endif extern void serialEventRun(void) __attribute__((weak)); diff --git a/cores/arduino/HardwareSerial0.cpp b/cores/arduino/HardwareSerial0.cpp new file mode 100644 index 0000000..1146eeb --- /dev/null +++ b/cores/arduino/HardwareSerial0.cpp @@ -0,0 +1,79 @@ +/* + HardwareSerial0.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus + Modified 3 December 2013 by Matthijs Kooijman +*/ + +#include "Arduino.h" +#include "HardwareSerial.h" +#include "HardwareSerial_private.h" + +// Each HardwareSerial is defined in its own file, sine the linker pulls +// in the entire file when any element inside is used. --gc-sections can +// additionally cause unused symbols to be dropped, but ISRs have the +// "used" attribute so are never dropped and they keep the +// HardwareSerial instance in as well. Putting each instance in its own +// file prevents the linker from pulling in any unused instances in the +// first place. + +#if defined(HAVE_HWSERIAL0) + +#if defined(USART_RX_vect) + ISR(USART_RX_vect) +#elif defined(USART0_RX_vect) + ISR(USART0_RX_vect) +#elif defined(USART_RXC_vect) + ISR(USART_RXC_vect) // ATmega8 +#else + #error "Don't know what the Data Received vector is called for Serial" +#endif + { + Serial._rx_complete_irq(); + } + +#if defined(UART0_UDRE_vect) +ISR(UART0_UDRE_vect) +#elif defined(UART_UDRE_vect) +ISR(UART_UDRE_vect) +#elif defined(USART0_UDRE_vect) +ISR(USART0_UDRE_vect) +#elif defined(USART_UDRE_vect) +ISR(USART_UDRE_vect) +#else + #error "Don't know what the Data Register Empty vector is called for Serial" +#endif +{ + Serial._tx_udr_empty_irq(); +} + +#if defined(UBRRH) && defined(UBRRL) + HardwareSerial Serial(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR); +#else + HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0); +#endif + +// Function that can be weakly referenced by serialEventRun to prevent +// pulling in this file if it's not otherwise used. +bool Serial0_available() { + return Serial.available(); +} + +#endif // HAVE_HWSERIAL0 diff --git a/cores/arduino/HardwareSerial1.cpp b/cores/arduino/HardwareSerial1.cpp new file mode 100644 index 0000000..19625e2 --- /dev/null +++ b/cores/arduino/HardwareSerial1.cpp @@ -0,0 +1,69 @@ +/* + HardwareSerial1.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus + Modified 3 December 2013 by Matthijs Kooijman +*/ + +#include "Arduino.h" +#include "HardwareSerial.h" +#include "HardwareSerial_private.h" + +// Each HardwareSerial is defined in its own file, sine the linker pulls +// in the entire file when any element inside is used. --gc-sections can +// additionally cause unused symbols to be dropped, but ISRs have the +// "used" attribute so are never dropped and they keep the +// HardwareSerial instance in as well. Putting each instance in its own +// file prevents the linker from pulling in any unused instances in the +// first place. + +#if defined(HAVE_HWSERIAL1) + +#if defined(UART1_RX_vect) +ISR(UART1_RX_vect) +#elif defined(USART1_RX_vect) +ISR(USART1_RX_vect) +#else +#error "Don't know what the Data Register Empty vector is called for Serial1" +#endif +{ + Serial1._rx_complete_irq(); +} + +#if defined(UART1_UDRE_vect) +ISR(UART1_UDRE_vect) +#elif defined(USART1_UDRE_vect) +ISR(USART1_UDRE_vect) +#else +#error "Don't know what the Data Register Empty vector is called for Serial1" +#endif +{ + Serial1._tx_udr_empty_irq(); +} + +HardwareSerial Serial1(&UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1); + +// Function that can be weakly referenced by serialEventRun to prevent +// pulling in this file if it's not otherwise used. +bool Serial1_available() { + return Serial1.available(); +} + +#endif // HAVE_HWSERIAL1 diff --git a/cores/arduino/HardwareSerial2.cpp b/cores/arduino/HardwareSerial2.cpp new file mode 100644 index 0000000..fd334ae --- /dev/null +++ b/cores/arduino/HardwareSerial2.cpp @@ -0,0 +1,57 @@ +/* + HardwareSerial2.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus + Modified 3 December 2013 by Matthijs Kooijman +*/ + +#include "Arduino.h" +#include "HardwareSerial.h" +#include "HardwareSerial_private.h" + +// Each HardwareSerial is defined in its own file, sine the linker pulls +// in the entire file when any element inside is used. --gc-sections can +// additionally cause unused symbols to be dropped, but ISRs have the +// "used" attribute so are never dropped and they keep the +// HardwareSerial instance in as well. Putting each instance in its own +// file prevents the linker from pulling in any unused instances in the +// first place. + +#if defined(HAVE_HWSERIAL2) + +ISR(USART2_RX_vect) +{ + Serial2._rx_complete_irq(); +} + +ISR(USART2_UDRE_vect) +{ + Serial2._tx_udr_empty_irq(); +} + +HardwareSerial Serial2(&UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2); + +// Function that can be weakly referenced by serialEventRun to prevent +// pulling in this file if it's not otherwise used. +bool Serial2_available() { + return Serial2.available(); +} + +#endif // HAVE_HWSERIAL2 diff --git a/cores/arduino/HardwareSerial3.cpp b/cores/arduino/HardwareSerial3.cpp new file mode 100644 index 0000000..a68095b --- /dev/null +++ b/cores/arduino/HardwareSerial3.cpp @@ -0,0 +1,57 @@ +/* + HardwareSerial3.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus + Modified 3 December 2013 by Matthijs Kooijman +*/ + +#include "Arduino.h" +#include "HardwareSerial.h" +#include "HardwareSerial_private.h" + +// Each HardwareSerial is defined in its own file, sine the linker pulls +// in the entire file when any element inside is used. --gc-sections can +// additionally cause unused symbols to be dropped, but ISRs have the +// "used" attribute so are never dropped and they keep the +// HardwareSerial instance in as well. Putting each instance in its own +// file prevents the linker from pulling in any unused instances in the +// first place. + +#if defined(HAVE_HWSERIAL3) + +ISR(USART3_RX_vect) +{ + Serial3._rx_complete_irq(); +} + +ISR(USART3_UDRE_vect) +{ + Serial3._tx_udr_empty_irq(); +} + +HardwareSerial Serial3(&UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3); + +// Function that can be weakly referenced by serialEventRun to prevent +// pulling in this file if it's not otherwise used. +bool Serial3_available() { + return Serial3.available(); +} + +#endif // HAVE_HWSERIAL3 diff --git a/cores/arduino/HardwareSerial_private.h b/cores/arduino/HardwareSerial_private.h new file mode 100644 index 0000000..761a5e5 --- /dev/null +++ b/cores/arduino/HardwareSerial_private.h @@ -0,0 +1,123 @@ +/* + HardwareSerial_private.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus +*/ + +#include "wiring_private.h" + +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(HAVE_HWSERIAL0) || defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3) + +// Ensure that the various bit positions we use are available with a 0 +// postfix, so we can always use the values for UART0 for all UARTs. The +// alternative, passing the various values for each UART to the +// HardwareSerial constructor also works, but makes the code bigger and +// slower. +#if !defined(TXC0) +#if defined(TXC) +// Some chips like ATmega8 don't have UPE, only PE. The other bits are +// named as expected. +#if !defined(UPE) && defined(PE) +#define UPE PE +#endif +// On ATmega8, the uart and its bits are not numbered, so there is no TXC0 etc. +#define TXC0 TXC +#define RXEN0 RXEN +#define TXEN0 TXEN +#define RXCIE0 RXCIE +#define UDRIE0 UDRIE +#define U2X0 U2X +#define UPE0 UPE +#define UDRE0 UDRE +#elif defined(TXC1) +// Some devices have uart1 but no uart0 +#define TXC0 TXC1 +#define RXEN0 RXEN1 +#define TXEN0 TXEN1 +#define RXCIE0 RXCIE1 +#define UDRIE0 UDRIE1 +#define U2X0 U2X1 +#define UPE0 UPE1 +#define UDRE0 UDRE1 +#else +#error No UART found in HardwareSerial.cpp +#endif +#endif // !defined TXC0 + +// Check at compiletime that it is really ok to use the bit positions of +// UART0 for the other UARTs as well, in case these values ever get +// changed for future hardware. +#if defined(TXC1) && (TXC1 != TXC0 || RXEN1 != RXEN0 || RXCIE1 != RXCIE0 || \ + UDRIE1 != UDRIE0 || U2X1 != U2X0 || UPE1 != UPE0 || \ + UDRE1 != UDRE0) +#error "Not all bit positions for UART1 are the same as for UART0" +#endif +#if defined(TXC2) && (TXC2 != TXC0 || RXEN2 != RXEN0 || RXCIE2 != RXCIE0 || \ + UDRIE2 != UDRIE0 || U2X2 != U2X0 || UPE2 != UPE0 || \ + UDRE2 != UDRE0) +#error "Not all bit positions for UART2 are the same as for UART0" +#endif +#if defined(TXC3) && (TXC3 != TXC0 || RXEN3 != RXEN0 || RXCIE3 != RXCIE0 || \ + UDRIE3 != UDRIE0 || U3X3 != U3X0 || UPE3 != UPE0 || \ + UDRE3 != UDRE0) +#error "Not all bit positions for UART3 are the same as for UART0" +#endif + +// Constructors //////////////////////////////////////////////////////////////// + +HardwareSerial::HardwareSerial( + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *ucsrc, volatile uint8_t *udr) : + _ubrrh(ubrrh), _ubrrl(ubrrl), + _ucsra(ucsra), _ucsrb(ucsrb), _ucsrc(ucsrc), + _udr(udr), + _rx_buffer_head(0), _rx_buffer_tail(0), + _tx_buffer_head(0), _tx_buffer_tail(0) +{ +} + +// Actual interrupt handlers ////////////////////////////////////////////////////////////// + +void HardwareSerial::_rx_complete_irq(void) +{ + if (bit_is_clear(*_ucsra, UPE0)) { + // No Parity error, read byte and store it in the buffer if there is + // room + unsigned char c = *_udr; + rx_buffer_index_t i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_RX_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != _rx_buffer_tail) { + _rx_buffer[_rx_buffer_head] = c; + _rx_buffer_head = i; + } + } else { + // Parity error, read byte but discard it + *_udr; + }; +} + +#endif // whole file diff --git a/cores/arduino/IPAddress.cpp b/cores/arduino/IPAddress.cpp index 3532172..899cbd4 100644 --- a/cores/arduino/IPAddress.cpp +++ b/cores/arduino/IPAddress.cpp @@ -22,42 +22,42 @@ IPAddress::IPAddress() { - memset(_address, 0, sizeof(_address)); + _address.dword = 0; } IPAddress::IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet) { - _address[0] = first_octet; - _address[1] = second_octet; - _address[2] = third_octet; - _address[3] = fourth_octet; + _address.bytes[0] = first_octet; + _address.bytes[1] = second_octet; + _address.bytes[2] = third_octet; + _address.bytes[3] = fourth_octet; } IPAddress::IPAddress(uint32_t address) { - memcpy(_address, &address, sizeof(_address)); + _address.dword = address; } IPAddress::IPAddress(const uint8_t *address) { - memcpy(_address, address, sizeof(_address)); + memcpy(_address.bytes, address, sizeof(_address.bytes)); } IPAddress& IPAddress::operator=(const uint8_t *address) { - memcpy(_address, address, sizeof(_address)); + memcpy(_address.bytes, address, sizeof(_address.bytes)); return *this; } IPAddress& IPAddress::operator=(uint32_t address) { - memcpy(_address, (const uint8_t *)&address, sizeof(_address)); + _address.dword = address; return *this; } -bool IPAddress::operator==(const uint8_t* addr) +bool IPAddress::operator==(const uint8_t* addr) const { - return memcmp(addr, _address, sizeof(_address)) == 0; + return memcmp(addr, _address.bytes, sizeof(_address.bytes)) == 0; } size_t IPAddress::printTo(Print& p) const @@ -65,10 +65,10 @@ size_t IPAddress::printTo(Print& p) const size_t n = 0; for (int i =0; i < 3; i++) { - n += p.print(_address[i], DEC); + n += p.print(_address.bytes[i], DEC); n += p.print('.'); } - n += p.print(_address[3], DEC); + n += p.print(_address.bytes[3], DEC); return n; } diff --git a/cores/arduino/IPAddress.h b/cores/arduino/IPAddress.h index c2dd7e5..94acdc4 100644 --- a/cores/arduino/IPAddress.h +++ b/cores/arduino/IPAddress.h @@ -20,18 +20,23 @@ #ifndef IPAddress_h #define IPAddress_h +#include <stdint.h> #include <Printable.h> // A class to make it easier to handle and pass around IP addresses class IPAddress : public Printable { private: - uint8_t _address[4]; // IPv4 address + union { + uint8_t bytes[4]; // IPv4 address + uint32_t dword; + } _address; + // Access the raw byte array containing the address. Because this returns a pointer // to the internal structure rather than a copy of the address this function should only // be used when you know that the usage of the returned uint8_t* will be transient and not // stored. - uint8_t* raw_address() { return _address; }; + uint8_t* raw_address() { return _address.bytes; }; public: // Constructors @@ -42,13 +47,13 @@ public: // Overloaded cast operator to allow IPAddress objects to be used where a pointer // to a four-byte uint8_t array is expected - operator uint32_t() { return *((uint32_t*)_address); }; - bool operator==(const IPAddress& addr) { return (*((uint32_t*)_address)) == (*((uint32_t*)addr._address)); }; - bool operator==(const uint8_t* addr); + operator uint32_t() const { return _address.dword; }; + bool operator==(const IPAddress& addr) const { return _address.dword == addr._address.dword; }; + bool operator==(const uint8_t* addr) const; // Overloaded index operator to allow getting and setting individual octets of the address - uint8_t operator[](int index) const { return _address[index]; }; - uint8_t& operator[](int index) { return _address[index]; }; + uint8_t operator[](int index) const { return _address.bytes[index]; }; + uint8_t& operator[](int index) { return _address.bytes[index]; }; // Overloaded copy operators to allow initialisation of IPAddress objects from other types IPAddress& operator=(const uint8_t *address); diff --git a/cores/arduino/Platform.h b/cores/arduino/Platform.h deleted file mode 100644 index 8b8f742..0000000 --- a/cores/arduino/Platform.h +++ /dev/null @@ -1,23 +0,0 @@ - -#ifndef __PLATFORM_H__ -#define __PLATFORM_H__ - -#include <inttypes.h> -#include <avr/pgmspace.h> -#include <avr/eeprom.h> -#include <avr/interrupt.h> -#include <util/delay.h> - -typedef unsigned char u8; -typedef unsigned short u16; -typedef unsigned long u32; - -#include "Arduino.h" - -#if defined(USBCON) - #include "USBDesc.h" - #include "USBCore.h" - #include "USBAPI.h" -#endif /* if defined(USBCON) */ - -#endif diff --git a/cores/arduino/Print.cpp b/cores/arduino/Print.cpp index 5df5630..5df5630 100755..100644 --- a/cores/arduino/Print.cpp +++ b/cores/arduino/Print.cpp diff --git a/cores/arduino/Print.h b/cores/arduino/Print.h index 7b53aa4..7b53aa4 100755..100644 --- a/cores/arduino/Print.h +++ b/cores/arduino/Print.h diff --git a/cores/arduino/Printable.h b/cores/arduino/Printable.h index d03c9af..2a1b2e9 100644 --- a/cores/arduino/Printable.h +++ b/cores/arduino/Printable.h @@ -20,7 +20,7 @@ #ifndef Printable_h #define Printable_h -#include <new.h> +#include <stdlib.h> class Print; diff --git a/cores/arduino/Stream.cpp b/cores/arduino/Stream.cpp index f21a411..9c581be 100644 --- a/cores/arduino/Stream.cpp +++ b/cores/arduino/Stream.cpp @@ -75,7 +75,7 @@ void Stream::setTimeout(unsigned long timeout) // sets the maximum number of mi // find returns true if the target string is found bool Stream::find(char *target) { - return findUntil(target, ""); + return findUntil(target, (char*)""); } // reads data from the stream until the target string of given length is found @@ -176,7 +176,7 @@ float Stream::parseFloat(char skipChar){ boolean isNegative = false; boolean isFraction = false; long value = 0; - char c; + int c; float fraction = 1.0; c = peekNextDigit(); diff --git a/cores/arduino/Stream.h b/cores/arduino/Stream.h index 007b4bc..5cf5ddf 100644 --- a/cores/arduino/Stream.h +++ b/cores/arduino/Stream.h @@ -57,14 +57,18 @@ class Stream : public Print void setTimeout(unsigned long timeout); // sets maximum milliseconds to wait for stream data, default is 1 second bool find(char *target); // reads data from the stream until the target string is found + bool find(uint8_t *target) { return find ((char *)target); } // returns true if target string is found, false if timed out (see setTimeout) bool find(char *target, size_t length); // reads data from the stream until the target string of given length is found + bool find(uint8_t *target, size_t length) { return find ((char *)target, length); } // returns true if target string is found, false if timed out bool findUntil(char *target, char *terminator); // as find but search ends if the terminator string is found + bool findUntil(uint8_t *target, char *terminator) { return findUntil((char *)target, terminator); } bool findUntil(char *target, size_t targetLen, char *terminate, size_t termLen); // as above but search ends if the terminate string is found + bool findUntil(uint8_t *target, size_t targetLen, char *terminate, size_t termLen) {return findUntil((char *)target, targetLen, terminate, termLen); } long parseInt(); // returns the first valid (long) integer value from the current position. @@ -74,10 +78,12 @@ class Stream : public Print float parseFloat(); // float version of parseInt size_t readBytes( char *buffer, size_t length); // read chars from stream into buffer + size_t readBytes( uint8_t *buffer, size_t length) { return readBytes((char *)buffer, length); } // terminates if length characters have been read or timeout (see setTimeout) // returns the number of characters placed in the buffer (0 means no valid data found) size_t readBytesUntil( char terminator, char *buffer, size_t length); // as readBytes with terminator character + size_t readBytesUntil( char terminator, uint8_t *buffer, size_t length) { return readBytesUntil(terminator, (char *)buffer, length); } // terminates if length characters have been read, timeout, or if the terminator character detected // returns the number of characters placed in the buffer (0 means no valid data found) diff --git a/cores/arduino/Tone.cpp b/cores/arduino/Tone.cpp index 9bb6fe7..9bb6fe7 100755..100644 --- a/cores/arduino/Tone.cpp +++ b/cores/arduino/Tone.cpp diff --git a/cores/arduino/USBAPI.h b/cores/arduino/USBAPI.h index 4846fc2..2fab957 100644 --- a/cores/arduino/USBAPI.h +++ b/cores/arduino/USBAPI.h @@ -1,10 +1,42 @@ +/* + USBAPI.h + Copyright (c) 2005-2014 Arduino. All right reserved. + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ #ifndef __USBAPI__ #define __USBAPI__ +#include <inttypes.h> +#include <avr/pgmspace.h> +#include <avr/eeprom.h> +#include <avr/interrupt.h> +#include <util/delay.h> + +typedef unsigned char u8; +typedef unsigned short u16; +typedef unsigned long u32; + +#include "Arduino.h" + #if defined(USBCON) +#include "USBDesc.h" +#include "USBCore.h" + //================================================================================ //================================================================================ // USB @@ -25,6 +57,14 @@ extern USBDevice_ USBDevice; //================================================================================ // Serial over CDC (Serial1 is the physical port) +struct ring_buffer; + +#if (RAMEND < 1000) +#define SERIAL_BUFFER_SIZE 16 +#else +#define SERIAL_BUFFER_SIZE 64 +#endif + class Serial_ : public Stream { private: @@ -43,9 +83,15 @@ public: virtual size_t write(const uint8_t*, size_t); using Print::write; // pull in write(str) and write(buf, size) from Print operator bool(); + + volatile uint8_t _rx_buffer_head; + volatile uint8_t _rx_buffer_tail; + unsigned char _rx_buffer[SERIAL_BUFFER_SIZE]; }; extern Serial_ Serial; +#define HAVE_CDCSERIAL + //================================================================================ //================================================================================ // Mouse diff --git a/cores/arduino/USBCore.cpp b/cores/arduino/USBCore.cpp index f8123e5..b4f7bed 100644 --- a/cores/arduino/USBCore.cpp +++ b/cores/arduino/USBCore.cpp @@ -16,9 +16,7 @@ ** SOFTWARE. */ -#include "Platform.h" #include "USBAPI.h" -#include "USBDesc.h" #if defined(USBCON) @@ -39,8 +37,8 @@ volatile u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ //================================================================== extern const u16 STRING_LANGUAGE[] PROGMEM; -extern const u16 STRING_IPRODUCT[] PROGMEM; -extern const u16 STRING_IMANUFACTURER[] PROGMEM; +extern const u8 STRING_PRODUCT[] PROGMEM; +extern const u8 STRING_MANUFACTURER[] PROGMEM; extern const DeviceDescriptor USB_DeviceDescriptor PROGMEM; extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM; @@ -49,31 +47,30 @@ const u16 STRING_LANGUAGE[2] = { 0x0409 // English }; -const u16 STRING_IPRODUCT[17] = { - (3<<8) | (2+2*16), -#if USB_PID == 0x8036 - 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o' -#elif USB_PID == 0x8037 - 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ',' ',' ' -#elif USB_PID == 0x803C - 'A','r','d','u','i','n','o',' ','E','s','p','l','o','r','a',' ' -#elif USB_PID == 0x9208 - 'L','i','l','y','P','a','d','U','S','B',' ',' ',' ',' ',' ',' ' -#else - 'U','S','B',' ','I','O',' ','B','o','a','r','d',' ',' ',' ',' ' +#ifndef USB_PRODUCT +// If no product is provided, use USB IO Board +#define USB_PRODUCT "USB IO Board" #endif -}; -const u16 STRING_IMANUFACTURER[12] = { - (3<<8) | (2+2*11), +const u8 STRING_PRODUCT[] PROGMEM = USB_PRODUCT; + #if USB_VID == 0x2341 - 'A','r','d','u','i','n','o',' ','L','L','C' +# if defined(USB_MANUFACTURER) +# undef USB_MANUFACTURER +# endif +# define USB_MANUFACTURER "Arduino LLC" #elif USB_VID == 0x1b4f - 'S','p','a','r','k','F','u','n',' ',' ',' ' -#else - 'U','n','k','n','o','w','n',' ',' ',' ',' ' +# if defined(USB_MANUFACTURER) +# undef USB_MANUFACTURER +# endif +# define USB_MANUFACTURER "SparkFun" +#elif !defined(USB_MANUFACTURER) +// Fall through to unknown if no manufacturer name was provided in a macro +# define USB_MANUFACTURER "Unknown" #endif -}; + +const u8 STRING_MANUFACTURER[] PROGMEM = USB_MANUFACTURER; + #ifdef CDC_ENABLED #define DEVICE_CLASS 0x02 @@ -95,7 +92,8 @@ volatile u8 _usbConfiguration = 0; static inline void WaitIN(void) { - while (!(UEINTX & (1<<TXINI))); + while (!(UEINTX & (1<<TXINI))) + ; } static inline void ClearIN(void) @@ -275,7 +273,6 @@ int USB_Send(u8 ep, const void* d, int len) int r = len; const u8* data = (const u8*)d; - u8 zero = ep & TRANSFER_ZERO; u8 timeout = 250; // 250ms timeout on send? TODO while (len) { @@ -419,6 +416,22 @@ int USB_SendControl(u8 flags, const void* d, int len) return sent; } +// Send a USB descriptor string. The string is stored in PROGMEM as a +// plain ASCII string but is sent out as UTF-16 with the correct 2-byte +// prefix +static bool USB_SendStringDescriptor(const u8*string_P, u8 string_len) { + SendControl(2 + string_len * 2); + SendControl(3); + for(u8 i = 0; i < string_len; i++) { + bool r = SendControl(pgm_read_byte(&string_P[i])); + r &= SendControl(0); // high byte + if(!r) { + return false; + } + } + return true; +} + // Does not timeout or cross fifo boundaries // Will only work for transfers <= 64 bytes // TODO @@ -479,7 +492,6 @@ bool SendDescriptor(Setup& setup) return HID_GetDescriptor(t); #endif - u8 desc_length = 0; const u8* desc_addr = 0; if (USB_DEVICE_DESCRIPTOR_TYPE == t) { @@ -489,20 +501,22 @@ bool SendDescriptor(Setup& setup) } else if (USB_STRING_DESCRIPTOR_TYPE == t) { - if (setup.wValueL == 0) + if (setup.wValueL == 0) { desc_addr = (const u8*)&STRING_LANGUAGE; - else if (setup.wValueL == IPRODUCT) - desc_addr = (const u8*)&STRING_IPRODUCT; - else if (setup.wValueL == IMANUFACTURER) - desc_addr = (const u8*)&STRING_IMANUFACTURER; + } + else if (setup.wValueL == IPRODUCT) { + return USB_SendStringDescriptor(STRING_PRODUCT, strlen(USB_PRODUCT)); + } + else if (setup.wValueL == IMANUFACTURER) { + return USB_SendStringDescriptor(STRING_MANUFACTURER, strlen(USB_MANUFACTURER)); + } else return false; } if (desc_addr == 0) return false; - if (desc_length == 0) - desc_length = pgm_read_byte(desc_addr); + u8 desc_length = pgm_read_byte(desc_addr); USB_SendControl(TRANSFER_PGM,desc_addr,desc_length); return true; diff --git a/cores/arduino/WString.cpp b/cores/arduino/WString.cpp index ed880ce..dcd469d 100644 --- a/cores/arduino/WString.cpp +++ b/cores/arduino/WString.cpp @@ -619,7 +619,7 @@ String String::substring(unsigned int left, unsigned int right) const left = temp; } String out; - if (left > len) return out; + if (left >= len) return out; if (right > len) right = len; char temp = buffer[right]; // save the replaced character buffer[right] = '\0'; @@ -684,15 +684,16 @@ void String::replace(const String& find, const String& replace) } void String::remove(unsigned int index){ - if (index >= len) { return; } - int count = len - index; - remove(index, count); + // Pass the biggest integer as the count. The remove method + // below will take care of truncating it at the end of the + // string. + remove(index, (unsigned int)-1); } void String::remove(unsigned int index, unsigned int count){ if (index >= len) { return; } if (count <= 0) { return; } - if (index + count > len) { count = len - index; } + if (count > len - index) { count = len - index; } char *writeTo = buffer + index; len = len - count; strncpy(writeTo, buffer + index + count,len - index); diff --git a/cores/arduino/abi.cpp b/cores/arduino/abi.cpp new file mode 100644 index 0000000..8d719b8 --- /dev/null +++ b/cores/arduino/abi.cpp @@ -0,0 +1,35 @@ +/* + Copyright (c) 2014 Arduino. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <stdlib.h> + +extern "C" void __cxa_pure_virtual(void) __attribute__ ((__noreturn__)); +extern "C" void __cxa_deleted_virtual(void) __attribute__ ((__noreturn__)); + +void __cxa_pure_virtual(void) { + // We might want to write some diagnostics to uart in this case + //std::terminate(); + abort(); +} + +void __cxa_deleted_virtual(void) { + // We might want to write some diagnostics to uart in this case + //std::terminate(); + abort(); +} + diff --git a/cores/arduino/avr-libc/malloc.c b/cores/arduino/avr-libc/malloc.c deleted file mode 100644 index 9dcfe21..0000000 --- a/cores/arduino/avr-libc/malloc.c +++ /dev/null @@ -1,267 +0,0 @@ -/* Copyright (c) 2002, 2004, 2010 Joerg Wunsch - Copyright (c) 2010 Gerben van den Broeke - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - - * Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - - -/* $Id: malloc.c 2149 2010-06-09 20:45:37Z joerg_wunsch $ */ - -#include <stdlib.h> -#include "sectionname.h" -#include "stdlib_private.h" - -#include <avr/io.h> - -/* - * Exported interface: - * - * When extending the data segment, the allocator will not try to go - * beyond the current stack limit, decreased by __malloc_margin bytes. - * Thus, all possible stack frames of interrupt routines that could - * interrupt the current function, plus all further nested function - * calls must not require more stack space, or they'll risk to collide - * with the data segment. - */ - -/* May be changed by the user only before the first malloc() call. */ - -size_t __malloc_margin = 128; -char *__malloc_heap_start = &__heap_start; -char *__malloc_heap_end = &__heap_end; - -char *__brkval; -struct __freelist *__flp; - -ATTRIBUTE_CLIB_SECTION -void * -malloc(size_t len) -{ - struct __freelist *fp1, *fp2, *sfp1, *sfp2; - char *cp; - size_t s, avail; - - /* - * Our minimum chunk size is the size of a pointer (plus the - * size of the "sz" field, but we don't need to account for - * this), otherwise we could not possibly fit a freelist entry - * into the chunk later. - */ - if (len < sizeof(struct __freelist) - sizeof(size_t)) - len = sizeof(struct __freelist) - sizeof(size_t); - - /* - * First, walk the free list and try finding a chunk that - * would match exactly. If we found one, we are done. While - * walking, note down the smallest chunk we found that would - * still fit the request -- we need it for step 2. - * - */ - for (s = 0, fp1 = __flp, fp2 = 0; - fp1; - fp2 = fp1, fp1 = fp1->nx) { - if (fp1->sz < len) - continue; - if (fp1->sz == len) { - /* - * Found it. Disconnect the chunk from the - * freelist, and return it. - */ - if (fp2) - fp2->nx = fp1->nx; - else - __flp = fp1->nx; - return &(fp1->nx); - } - else { - if (s == 0 || fp1->sz < s) { - /* this is the smallest chunk found so far */ - s = fp1->sz; - sfp1 = fp1; - sfp2 = fp2; - } - } - } - /* - * Step 2: If we found a chunk on the freelist that would fit - * (but was too large), look it up again and use it, since it - * is our closest match now. Since the freelist entry needs - * to be split into two entries then, watch out that the - * difference between the requested size and the size of the - * chunk found is large enough for another freelist entry; if - * not, just enlarge the request size to what we have found, - * and use the entire chunk. - */ - if (s) { - if (s - len < sizeof(struct __freelist)) { - /* Disconnect it from freelist and return it. */ - if (sfp2) - sfp2->nx = sfp1->nx; - else - __flp = sfp1->nx; - return &(sfp1->nx); - } - /* - * Split them up. Note that we leave the first part - * as the new (smaller) freelist entry, and return the - * upper portion to the caller. This saves us the - * work to fix up the freelist chain; we just need to - * fixup the size of the current entry, and note down - * the size of the new chunk before returning it to - * the caller. - */ - cp = (char *)sfp1; - s -= len; - cp += s; - sfp2 = (struct __freelist *)cp; - sfp2->sz = len; - sfp1->sz = s - sizeof(size_t); - return &(sfp2->nx); - } - /* - * Step 3: If the request could not be satisfied from a - * freelist entry, just prepare a new chunk. This means we - * need to obtain more memory first. The largest address just - * not allocated so far is remembered in the brkval variable. - * Under Unix, the "break value" was the end of the data - * segment as dynamically requested from the operating system. - * Since we don't have an operating system, just make sure - * that we don't collide with the stack. - */ - if (__brkval == 0) - __brkval = __malloc_heap_start; - cp = __malloc_heap_end; - if (cp == 0) - cp = STACK_POINTER() - __malloc_margin; - if (cp <= __brkval) - /* - * Memory exhausted. - */ - return 0; - avail = cp - __brkval; - /* - * Both tests below are needed to catch the case len >= 0xfffe. - */ - if (avail >= len && avail >= len + sizeof(size_t)) { - fp1 = (struct __freelist *)__brkval; - __brkval += len + sizeof(size_t); - fp1->sz = len; - return &(fp1->nx); - } - /* - * Step 4: There's no help, just fail. :-/ - */ - return 0; -} - - -ATTRIBUTE_CLIB_SECTION -void -free(void *p) -{ - struct __freelist *fp1, *fp2, *fpnew; - char *cp1, *cp2, *cpnew; - - /* ISO C says free(NULL) must be a no-op */ - if (p == 0) - return; - - cpnew = p; - cpnew -= sizeof(size_t); - fpnew = (struct __freelist *)cpnew; - fpnew->nx = 0; - - /* - * Trivial case first: if there's no freelist yet, our entry - * will be the only one on it. If this is the last entry, we - * can reduce __brkval instead. - */ - if (__flp == 0) { - if ((char *)p + fpnew->sz == __brkval) - __brkval = cpnew; - else - __flp = fpnew; - return; - } - - /* - * Now, find the position where our new entry belongs onto the - * freelist. Try to aggregate the chunk with adjacent chunks - * if possible. - */ - for (fp1 = __flp, fp2 = 0; - fp1; - fp2 = fp1, fp1 = fp1->nx) { - if (fp1 < fpnew) - continue; - cp1 = (char *)fp1; - fpnew->nx = fp1; - if ((char *)&(fpnew->nx) + fpnew->sz == cp1) { - /* upper chunk adjacent, assimilate it */ - fpnew->sz += fp1->sz + sizeof(size_t); - fpnew->nx = fp1->nx; - } - if (fp2 == 0) { - /* new head of freelist */ - __flp = fpnew; - return; - } - break; - } - /* - * Note that we get here either if we hit the "break" above, - * or if we fell off the end of the loop. The latter means - * we've got a new topmost chunk. Either way, try aggregating - * with the lower chunk if possible. - */ - fp2->nx = fpnew; - cp2 = (char *)&(fp2->nx); - if (cp2 + fp2->sz == cpnew) { - /* lower junk adjacent, merge */ - fp2->sz += fpnew->sz + sizeof(size_t); - fp2->nx = fpnew->nx; - } - /* - * If there's a new topmost chunk, lower __brkval instead. - */ - for (fp1 = __flp, fp2 = 0; - fp1->nx != 0; - fp2 = fp1, fp1 = fp1->nx) - /* advance to entry just before end of list */; - cp2 = (char *)&(fp1->nx); - if (cp2 + fp1->sz == __brkval) { - if (fp2 == NULL) - /* Freelist is empty now. */ - __flp = NULL; - else - fp2->nx = NULL; - __brkval = cp2 - sizeof(size_t); - } -} - diff --git a/cores/arduino/avr-libc/realloc.c b/cores/arduino/avr-libc/realloc.c deleted file mode 100644 index b76ce56..0000000 --- a/cores/arduino/avr-libc/realloc.c +++ /dev/null @@ -1,150 +0,0 @@ -/* Copyright (c) 2004, 2010 Joerg Wunsch - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - - * Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ -/* $Id: realloc.c 2127 2010-06-07 14:49:37Z joerg_wunsch $ */ - -#include <stdlib.h> -#include <string.h> -#include "sectionname.h" -#include "stdlib_private.h" - -#include <avr/io.h> - -ATTRIBUTE_CLIB_SECTION -void * -realloc(void *ptr, size_t len) -{ - struct __freelist *fp1, *fp2, *fp3, *ofp3; - char *cp, *cp1; - void *memp; - size_t s, incr; - - /* Trivial case, required by C standard. */ - if (ptr == 0) - return malloc(len); - - cp1 = (char *)ptr; - cp1 -= sizeof(size_t); - fp1 = (struct __freelist *)cp1; - - cp = (char *)ptr + len; /* new next pointer */ - if (cp < cp1) - /* Pointer wrapped across top of RAM, fail. */ - return 0; - - /* - * See whether we are growing or shrinking. When shrinking, - * we split off a chunk for the released portion, and call - * free() on it. Therefore, we can only shrink if the new - * size is at least sizeof(struct __freelist) smaller than the - * previous size. - */ - if (len <= fp1->sz) { - /* The first test catches a possible unsigned int - * rollover condition. */ - if (fp1->sz <= sizeof(struct __freelist) || - len > fp1->sz - sizeof(struct __freelist)) - return ptr; - fp2 = (struct __freelist *)cp; - fp2->sz = fp1->sz - len - sizeof(size_t); - fp1->sz = len; - free(&(fp2->nx)); - return ptr; - } - - /* - * If we get here, we are growing. First, see whether there - * is space in the free list on top of our current chunk. - */ - incr = len - fp1->sz; - cp = (char *)ptr + fp1->sz; - fp2 = (struct __freelist *)cp; - for (s = 0, ofp3 = 0, fp3 = __flp; - fp3; - ofp3 = fp3, fp3 = fp3->nx) { - if (fp3 == fp2 && fp3->sz + sizeof(size_t) >= incr) { - /* found something that fits */ - if (fp3->sz + sizeof(size_t) - incr > sizeof(struct __freelist)) { - /* split off a new freelist entry */ - cp = (char *)ptr + len; - fp2 = (struct __freelist *)cp; - fp2->nx = fp3->nx; - fp2->sz = fp3->sz - incr; - fp1->sz = len; - } else { - /* it just fits, so use it entirely */ - fp1->sz += fp3->sz + sizeof(size_t); - fp2 = fp3->nx; - } - if (ofp3) - ofp3->nx = fp2; - else - __flp = fp2; - return ptr; - } - /* - * Find the largest chunk on the freelist while - * walking it. - */ - if (fp3->sz > s) - s = fp3->sz; - } - /* - * If we are the topmost chunk in memory, and there was no - * large enough chunk on the freelist that could be re-used - * (by a call to malloc() below), quickly extend the - * allocation area if possible, without need to copy the old - * data. - */ - if (__brkval == (char *)ptr + fp1->sz && len > s) { - cp1 = __malloc_heap_end; - cp = (char *)ptr + len; - if (cp1 == 0) - cp1 = STACK_POINTER() - __malloc_margin; - if (cp < cp1) { - __brkval = cp; - fp1->sz = len; - return ptr; - } - /* If that failed, we are out of luck. */ - return 0; - } - - /* - * Call malloc() for a new chunk, then copy over the data, and - * release the old region. - */ - if ((memp = malloc(len)) == 0) - return 0; - memcpy(memp, ptr, fp1->sz); - free(ptr); - return memp; -} - diff --git a/cores/arduino/avr-libc/sectionname.h b/cores/arduino/avr-libc/sectionname.h deleted file mode 100644 index 8e0f448..0000000 --- a/cores/arduino/avr-libc/sectionname.h +++ /dev/null @@ -1,49 +0,0 @@ -/* Copyright (c) 2009 Atmel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - - * Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifndef __SECTIONNAME_H__ -#define __SECTIONNAME_H__ - -/* Put all avr-libc functions in a common, unique sub-section name under .text. */ - -#define CLIB_SECTION .text.avr-libc -#define MLIB_SECTION .text.avr-libc.fplib - -#define STR(x) _STR(x) -#define _STR(x) #x - -#define ATTRIBUTE_CLIB_SECTION __attribute__ ((section (STR(CLIB_SECTION)))) -#define ATTRIBUTE_MLIB_SECTION __attribute__ ((section (STR(MLIB_SECTION)))) - -#define ASSEMBLY_CLIB_SECTION .section CLIB_SECTION, "ax", @progbits -#define ASSEMBLY_MLIB_SECTION .section MLIB_SECTION, "ax", @progbits - -#endif diff --git a/cores/arduino/avr-libc/stdlib_private.h b/cores/arduino/avr-libc/stdlib_private.h deleted file mode 100644 index 65c3427..0000000 --- a/cores/arduino/avr-libc/stdlib_private.h +++ /dev/null @@ -1,58 +0,0 @@ -/* Copyright (c) 2004, Joerg Wunsch - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. -*/ - -/* $Id: stdlib_private.h 1657 2008-03-24 17:11:08Z arcanum $ */ - -#include <inttypes.h> -#include <stdlib.h> -#include <avr/io.h> - -#if !defined(__DOXYGEN__) - -struct __freelist { - size_t sz; - struct __freelist *nx; -}; - -#endif - -extern char *__brkval; /* first location not yet allocated */ -extern struct __freelist *__flp; /* freelist pointer (head of freelist) */ -extern size_t __malloc_margin; /* user-changeable before the first malloc() */ -extern char *__malloc_heap_start; -extern char *__malloc_heap_end; - -extern char __heap_start; -extern char __heap_end; - -/* Needed for definition of AVR_STACK_POINTER_REG. */ -#include <avr/io.h> - -#define STACK_POINTER() ((char *)AVR_STACK_POINTER_REG) - diff --git a/cores/arduino/hooks.c b/cores/arduino/hooks.c new file mode 100644 index 0000000..641eabc --- /dev/null +++ b/cores/arduino/hooks.c @@ -0,0 +1,31 @@ +/* + Copyright (c) 2012 Arduino. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/** + * Empty yield() hook. + * + * This function is intended to be used by library writers to build + * libraries or sketches that supports cooperative threads. + * + * Its defined as a weak symbol and it can be redefined to implement a + * real cooperative scheduler. + */ +static void __empty() { + // Empty +} +void yield(void) __attribute__ ((weak, alias("__empty"))); diff --git a/cores/arduino/new.cpp b/cores/arduino/new.cpp index b81031e..cf6f89c 100644 --- a/cores/arduino/new.cpp +++ b/cores/arduino/new.cpp @@ -1,28 +1,36 @@ -#include <new.h> +/* + Copyright (c) 2014 Arduino. All right reserved. -void * operator new(size_t size) -{ + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <stdlib.h> + +void *operator new(size_t size) { return malloc(size); } -void * operator new[](size_t size) -{ +void *operator new[](size_t size) { return malloc(size); } -void operator delete(void * ptr) -{ +void operator delete(void * ptr) { free(ptr); } -void operator delete[](void * ptr) -{ +void operator delete[](void * ptr) { free(ptr); } -int __cxa_guard_acquire(__guard *g) {return !*(char *)(g);}; -void __cxa_guard_release (__guard *g) {*(char *)g = 1;}; -void __cxa_guard_abort (__guard *) {}; - -void __cxa_pure_virtual(void) {}; - diff --git a/cores/arduino/new.h b/cores/arduino/new.h index 991c86c..6e1b68f 100644 --- a/cores/arduino/new.h +++ b/cores/arduino/new.h @@ -1,6 +1,20 @@ -/* Header to define new/delete operators as they aren't provided by avr-gcc by default - Taken from http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=59453 - */ +/* + Copyright (c) 2014 Arduino. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ #ifndef NEW_H #define NEW_H @@ -12,13 +26,5 @@ void * operator new[](size_t size); void operator delete(void * ptr); void operator delete[](void * ptr); -__extension__ typedef int __guard __attribute__((mode (__DI__))); - -extern "C" int __cxa_guard_acquire(__guard *); -extern "C" void __cxa_guard_release (__guard *); -extern "C" void __cxa_guard_abort (__guard *); - -extern "C" void __cxa_pure_virtual(void); - #endif diff --git a/cores/arduino/wiring.c b/cores/arduino/wiring.c index a3c4390..5cbe241 100644 --- a/cores/arduino/wiring.c +++ b/cores/arduino/wiring.c @@ -111,6 +111,7 @@ void delay(unsigned long ms) uint16_t start = (uint16_t)micros(); while (ms > 0) { + yield(); if (((uint16_t)micros() - start) >= 1000) { ms--; start += 1000; diff --git a/cores/arduino/wiring_analog.c b/cores/arduino/wiring_analog.c index 8feead9..48a9ef5 100644 --- a/cores/arduino/wiring_analog.c +++ b/cores/arduino/wiring_analog.c @@ -160,6 +160,14 @@ void analogWrite(uint8_t pin, int val) break; #endif + #if defined(TCCR1A) && defined(COM1C1) + case TIMER1C: + // connect pwm to pin on timer 1, channel B + sbi(TCCR1A, COM1C1); + OCR1C = val; // set pwm duty + break; + #endif + #if defined(TCCR2) && defined(COM21) case TIMER2: // connect pwm to pin on timer 2 diff --git a/cores/arduino/wiring_digital.c b/cores/arduino/wiring_digital.c index be323b1..df94cc1 100644 --- a/cores/arduino/wiring_digital.c +++ b/cores/arduino/wiring_digital.c @@ -84,6 +84,9 @@ static void turnOffPWM(uint8_t timer) #if defined(TCCR1A) && defined(COM1B1) case TIMER1B: cbi(TCCR1A, COM1B1); break; #endif + #if defined(TCCR1A) && defined(COM1C1) + case TIMER1C: cbi(TCCR1A, COM1C1); break; + #endif #if defined(TCCR2) && defined(COM21) case TIMER2: cbi(TCCR2, COM21); break; diff --git a/cores/arduino/wiring_private.h b/cores/arduino/wiring_private.h index c366005..5dc7d4b 100755..100644 --- a/cores/arduino/wiring_private.h +++ b/cores/arduino/wiring_private.h @@ -52,7 +52,7 @@ extern "C"{ #define EXTERNAL_INT_6 6 #define EXTERNAL_INT_7 7 -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega128RFA1__) || defined(__AVR_ATmega256RFR2__) #define EXTERNAL_NUM_INTERRUPTS 8 #elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644__) || defined(__AVR_ATmega644A__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) #define EXTERNAL_NUM_INTERRUPTS 3 diff --git a/cores/arduino/wiring_pulse.c b/cores/arduino/wiring_pulse.c index 0d96886..0d96886 100755..100644 --- a/cores/arduino/wiring_pulse.c +++ b/cores/arduino/wiring_pulse.c diff --git a/cores/arduino/wiring_shift.c b/cores/arduino/wiring_shift.c index cfe7867..cfe7867 100755..100644 --- a/cores/arduino/wiring_shift.c +++ b/cores/arduino/wiring_shift.c |