aboutsummaryrefslogtreecommitdiff
path: root/cores/arduino
diff options
context:
space:
mode:
Diffstat (limited to 'cores/arduino')
-rwxr-xr-xcores/arduino/HardwareSerial.cpp149
-rwxr-xr-xcores/arduino/HardwareSerial.h24
-rwxr-xr-xcores/arduino/WInterrupts.c140
-rwxr-xr-xcores/arduino/pins_arduino.c308
-rw-r--r--cores/arduino/pins_arduino.h27
-rwxr-xr-xcores/arduino/wiring.c11
-rwxr-xr-xcores/arduino/wiring_analog.c85
-rwxr-xr-xcores/arduino/wiring_digital.c12
-rwxr-xr-xcores/arduino/wiring_private.h10
9 files changed, 717 insertions, 49 deletions
diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp
index aab7fc5..f8a959a 100755
--- a/cores/arduino/HardwareSerial.cpp
+++ b/cores/arduino/HardwareSerial.cpp
@@ -1,5 +1,5 @@
/*
- HarwareSerial.cpp - Hardware serial library for Wiring
+ HardwareSerial.cpp - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
@@ -23,36 +23,169 @@
#include <string.h>
#include <inttypes.h>
#include "wiring.h"
+#include "wiring_private.h"
#include "HardwareSerial.h"
+// Define constants and variables for buffering incoming serial data. We're
+// using a ring buffer (I think), in which rx_buffer_head is the index of the
+// location to which to write the next incoming character and rx_buffer_tail
+// is the index of the location from which to read.
+#define RX_BUFFER_SIZE 128
+
+struct ring_buffer {
+ unsigned char buffer[RX_BUFFER_SIZE];
+ int head;
+ int tail;
+};
+
+ring_buffer rx_buffer = { { 0 }, 0, 0 };
+
+#if defined(__AVR_ATmega1280__)
+ring_buffer rx_buffer1 = { { 0 }, 0, 0 };
+ring_buffer rx_buffer2 = { { 0 }, 0, 0 };
+ring_buffer rx_buffer3 = { { 0 }, 0, 0 };
+#endif
+
+inline void store_char(unsigned char c, ring_buffer *rx_buffer)
+{
+ int i = (rx_buffer->head + 1) % RX_BUFFER_SIZE;
+
+ // if we should be storing the received character into the location
+ // just before the tail (meaning that the head would advance to the
+ // current location of the tail), we're about to overflow the buffer
+ // and so we don't write the character or advance the head.
+ if (i != rx_buffer->tail) {
+ rx_buffer->buffer[rx_buffer->head] = c;
+ rx_buffer->head = i;
+ }
+}
+
+#if defined(__AVR_ATmega1280__)
+
+SIGNAL(SIG_USART0_RECV)
+{
+ unsigned char c = UDR0;
+ store_char(c, &rx_buffer);
+}
+
+SIGNAL(SIG_USART1_RECV)
+{
+ unsigned char c = UDR1;
+ store_char(c, &rx_buffer1);
+}
+
+SIGNAL(SIG_USART2_RECV)
+{
+ unsigned char c = UDR2;
+ store_char(c, &rx_buffer2);
+}
+
+SIGNAL(SIG_USART3_RECV)
+{
+ unsigned char c = UDR3;
+ store_char(c, &rx_buffer3);
+}
+
+#else
+
+#if defined(__AVR_ATmega8__)
+SIGNAL(SIG_UART_RECV)
+#else
+SIGNAL(USART_RX_vect)
+#endif
+{
+#if defined(__AVR_ATmega8__)
+ unsigned char c = UDR;
+#else
+ unsigned char c = UDR0;
+#endif
+ store_char(c, &rx_buffer);
+}
+
+#endif
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+HardwareSerial::HardwareSerial(ring_buffer *rx_buffer,
+ volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+ volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+ volatile uint8_t *udr,
+ uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre)
+{
+ _rx_buffer = rx_buffer;
+ _ubrrh = ubrrh;
+ _ubrrl = ubrrl;
+ _ucsra = ucsra;
+ _ucsrb = ucsrb;
+ _udr = udr;
+ _rxen = rxen;
+ _txen = txen;
+ _rxcie = rxcie;
+ _udre = udre;
+}
+
// Public Methods //////////////////////////////////////////////////////////////
void HardwareSerial::begin(long speed)
{
- beginSerial(speed);
+ *_ubrrh = ((F_CPU / 16 + speed / 2) / speed - 1) >> 8;
+ *_ubrrl = ((F_CPU / 16 + speed / 2) / speed - 1);
+ sbi(*_ucsrb, _rxen);
+ sbi(*_ucsrb, _txen);
+ sbi(*_ucsrb, _rxcie);
}
uint8_t HardwareSerial::available(void)
{
- return serialAvailable();
+ return (RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE;
}
int HardwareSerial::read(void)
{
- return serialRead();
+ // if the head isn't ahead of the tail, we don't have any characters
+ if (_rx_buffer->head == _rx_buffer->tail) {
+ return -1;
+ } else {
+ unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
+ _rx_buffer->tail = (_rx_buffer->tail + 1) % RX_BUFFER_SIZE;
+ return c;
+ }
}
void HardwareSerial::flush()
{
- serialFlush();
+ // don't reverse this or there may be problems if the RX interrupt
+ // occurs after reading the value of rx_buffer_head but before writing
+ // the value to rx_buffer_tail; the previous value of rx_buffer_head
+ // may be written to rx_buffer_tail, making it appear as if the buffer
+ // don't reverse this or there may be problems if the RX interrupt
+ // occurs after reading the value of rx_buffer_head but before writing
+ // the value to rx_buffer_tail; the previous value of rx_buffer_head
+ // may be written to rx_buffer_tail, making it appear as if the buffer
+ // were full, not empty.
+ _rx_buffer->head = _rx_buffer->tail;
}
-void HardwareSerial::write(uint8_t b) {
- serialWrite(b);
+void HardwareSerial::write(uint8_t c)
+{
+ while (!((*_ucsra) & (1 << _udre)))
+ ;
+
+ *_udr = c;
}
// Preinstantiate Objects //////////////////////////////////////////////////////
-HardwareSerial Serial = HardwareSerial();
+#if defined(__AVR_ATmega8__)
+HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE);
+#else
+HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0);
+#endif
+
+#if defined(__AVR_ATmega1280__)
+HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1);
+HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2);
+HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3);
+#endif
diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h
index e4cb969..55abf07 100755
--- a/cores/arduino/HardwareSerial.h
+++ b/cores/arduino/HardwareSerial.h
@@ -24,9 +24,27 @@
#include "Print.h"
+struct ring_buffer;
+
class HardwareSerial : public Print
{
+ private:
+ ring_buffer *_rx_buffer;
+ volatile uint8_t *_ubrrh;
+ volatile uint8_t *_ubrrl;
+ volatile uint8_t *_ucsra;
+ volatile uint8_t *_ucsrb;
+ volatile uint8_t *_udr;
+ uint8_t _rxen;
+ uint8_t _txen;
+ uint8_t _rxcie;
+ uint8_t _udre;
public:
+ HardwareSerial(ring_buffer *rx_buffer,
+ volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+ volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+ volatile uint8_t *udr,
+ uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre);
void begin(long);
uint8_t available(void);
int read(void);
@@ -36,5 +54,11 @@ class HardwareSerial : public Print
extern HardwareSerial Serial;
+#if defined(__AVR_ATmega1280__)
+extern HardwareSerial Serial1;
+extern HardwareSerial Serial2;
+extern HardwareSerial Serial3;
+#endif
+
#endif
diff --git a/cores/arduino/WInterrupts.c b/cores/arduino/WInterrupts.c
index 8b9003f..69a78b0 100755
--- a/cores/arduino/WInterrupts.c
+++ b/cores/arduino/WInterrupts.c
@@ -44,29 +44,101 @@ void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
intFunc[interruptNum] = userFunc;
- if (interruptNum == 0) {
- // Configure the interrupt mode (trigger on low input, any change, rising
- // edge, or falling edge). The mode constants were chosen to correspond
- // to the configuration bits in the hardware register, so we simply shift
- // the mode into place.
- EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ // Configure the interrupt mode (trigger on low input, any change, rising
+ // edge, or falling edge). The mode constants were chosen to correspond
+ // to the configuration bits in the hardware register, so we simply shift
+ // the mode into place.
+
+ // Enable the interrupt.
- // Enable the interrupt.
+ switch (interruptNum) {
+#if defined(__AVR_ATmega1280__)
+ case 2:
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ break;
+ case 3:
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ break;
+ case 4:
+ EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ EIMSK |= (1 << INT2);
+ break;
+ case 5:
+ EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
+ EIMSK |= (1 << INT3);
+ break;
+ case 0:
+ EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
+ EIMSK |= (1 << INT4);
+ break;
+ case 1:
+ EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
+ EIMSK |= (1 << INT5);
+ break;
+ case 6:
+ EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
+ EIMSK |= (1 << INT6);
+ break;
+ case 7:
+ EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
+ EIMSK |= (1 << INT7);
+ break;
+#else
+ case 0:
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
EIMSK |= (1 << INT0);
- } else {
+ break;
+ case 1:
EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
EIMSK |= (1 << INT1);
+ break;
+#endif
}
}
}
void detachInterrupt(uint8_t interruptNum) {
if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
- if (interruptNum == 0)
- // Disable the interrupt.
+ // Disable the interrupt. (We can't assume that interruptNum is equal
+ // to the number of the EIMSK bit to clear, as this isn't true on the
+ // ATmega8. There, INT0 is 6 and INT1 is 7.)
+ switch (interruptNum) {
+#if defined(__AVR_ATmega1280__)
+ case 2:
+ EIMSK &= ~(1 << INT0);
+ break;
+ case 3:
+ EIMSK &= ~(1 << INT1);
+ break;
+ case 4:
+ EIMSK &= ~(1 << INT2);
+ break;
+ case 5:
+ EIMSK &= ~(1 << INT3);
+ break;
+ case 0:
+ EIMSK &= ~(1 << INT4);
+ break;
+ case 1:
+ EIMSK &= ~(1 << INT5);
+ break;
+ case 6:
+ EIMSK &= ~(1 << INT6);
+ break;
+ case 7:
+ EIMSK &= ~(1 << INT7);
+ break;
+#else
+ case 0:
EIMSK &= ~(1 << INT0);
- else
+ break;
+ case 1:
EIMSK &= ~(1 << INT1);
+ break;
+#endif
+ }
intFunc[interruptNum] = 0;
}
@@ -78,6 +150,50 @@ void attachInterruptTwi(void (*userFunc)(void) ) {
}
*/
+#if defined(__AVR_ATmega1280__)
+
+SIGNAL(INT0_vect) {
+ if(intFunc[EXTERNAL_INT_2])
+ intFunc[EXTERNAL_INT_2]();
+}
+
+SIGNAL(INT1_vect) {
+ if(intFunc[EXTERNAL_INT_3])
+ intFunc[EXTERNAL_INT_3]();
+}
+
+SIGNAL(INT2_vect) {
+ if(intFunc[EXTERNAL_INT_4])
+ intFunc[EXTERNAL_INT_4]();
+}
+
+SIGNAL(INT3_vect) {
+ if(intFunc[EXTERNAL_INT_5])
+ intFunc[EXTERNAL_INT_5]();
+}
+
+SIGNAL(INT4_vect) {
+ if(intFunc[EXTERNAL_INT_0])
+ intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT5_vect) {
+ if(intFunc[EXTERNAL_INT_1])
+ intFunc[EXTERNAL_INT_1]();
+}
+
+SIGNAL(INT6_vect) {
+ if(intFunc[EXTERNAL_INT_6])
+ intFunc[EXTERNAL_INT_6]();
+}
+
+SIGNAL(INT7_vect) {
+ if(intFunc[EXTERNAL_INT_7])
+ intFunc[EXTERNAL_INT_7]();
+}
+
+#else
+
SIGNAL(INT0_vect) {
if(intFunc[EXTERNAL_INT_0])
intFunc[EXTERNAL_INT_0]();
@@ -88,6 +204,8 @@ SIGNAL(INT1_vect) {
intFunc[EXTERNAL_INT_1]();
}
+#endif
+
/*
SIGNAL(SIG_2WIRE_SERIAL) {
if(twiIntFunc)
diff --git a/cores/arduino/pins_arduino.c b/cores/arduino/pins_arduino.c
index ef3f168..1c1c088 100755
--- a/cores/arduino/pins_arduino.c
+++ b/cores/arduino/pins_arduino.c
@@ -51,15 +51,315 @@
//
// (PWM+ indicates the additional PWM pins on the ATmega168.)
+// ATMEL ATMEGA1280 / ARDUINO
+//
+// 0-7 PE0-PE7 works
+// 8-13 PB0-PB5 works
+// 14-21 PA0-PA7 works
+// 22-29 PH0-PH7 works
+// 30-35 PG5-PG0 works
+// 36-43 PC7-PC0 works
+// 44-51 PJ7-PJ0 works
+// 52-59 PL7-PL0 works
+// 60-67 PD7-PD0 works
+// A0-A7 PF0-PF7
+// A8-A15 PK0-PK7
+#define PA 1
#define PB 2
#define PC 3
#define PD 4
+#define PE 5
+#define PF 6
+#define PG 7
+#define PH 8
+#define PJ 10
+#define PK 11
+#define PL 12
+
+#define REPEAT8(x) x, x, x, x, x, x, x, x
+#define BV0TO7 _BV(0), _BV(1), _BV(2), _BV(3), _BV(4), _BV(5), _BV(6), _BV(7)
+#define BV7TO0 _BV(7), _BV(6), _BV(5), _BV(4), _BV(3), _BV(2), _BV(1), _BV(0)
+
+
+#if defined(__AVR_ATmega1280__)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+ NOT_A_PORT,
+ &DDRA,
+ &DDRB,
+ &DDRC,
+ &DDRD,
+ &DDRE,
+ &DDRF,
+ &DDRG,
+ &DDRH,
+ NOT_A_PORT,
+ &DDRJ,
+ &DDRK,
+ &DDRL,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+ NOT_A_PORT,
+ &PORTA,
+ &PORTB,
+ &PORTC,
+ &PORTD,
+ &PORTE,
+ &PORTF,
+ &PORTG,
+ &PORTH,
+ NOT_A_PORT,
+ &PORTJ,
+ &PORTK,
+ &PORTL,
+};
+const uint16_t PROGMEM port_to_input_PGM[] = {
+ NOT_A_PIN,
+ &PINA,
+ &PINB,
+ &PINC,
+ &PIND,
+ &PINE,
+ &PINF,
+ &PING,
+ &PINH,
+ NOT_A_PIN,
+ &PINJ,
+ &PINK,
+ &PINL,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+ // PORTLIST
+ // -------------------------------------------
+ PE , // PE 0 ** 0 ** USART0_RX
+ PE , // PE 1 ** 1 ** USART0_TX
+ PE , // PE 4 ** 2 ** PWM2
+ PE , // PE 5 ** 3 ** PWM3
+ PG , // PG 5 ** 4 ** PWM4
+ PE , // PE 3 ** 5 ** PWM5
+ PH , // PH 3 ** 6 ** PWM6
+ PH , // PH 4 ** 7 ** PWM7
+ PH , // PH 5 ** 8 ** PWM8
+ PH , // PH 6 ** 9 ** PWM9
+ PB , // PB 4 ** 10 ** PWM10
+ PB , // PB 5 ** 11 ** PWM11
+ PB , // PB 6 ** 12 ** PWM12
+ PB , // PB 7 ** 13 ** PWM13
+ PJ , // PJ 1 ** 14 ** USART3_TX
+ PJ , // PJ 0 ** 15 ** USART3_RX
+ PH , // PH 1 ** 16 ** USART2_TX
+ PH , // PH 0 ** 17 ** USART2_RX
+ PD , // PD 3 ** 18 ** USART1_TX
+ PD , // PD 2 ** 19 ** USART1_RX
+ PD , // PD 1 ** 20 ** I2C_SDA
+ PD , // PD 0 ** 21 ** I2C_SCL
+ PA , // PA 0 ** 22 ** D22
+ PA , // PA 1 ** 23 ** D23
+ PA , // PA 2 ** 24 ** D24
+ PA , // PA 3 ** 25 ** D25
+ PA , // PA 4 ** 26 ** D26
+ PA , // PA 5 ** 27 ** D27
+ PA , // PA 6 ** 28 ** D28
+ PA , // PA 7 ** 29 ** D29
+ PC , // PC 7 ** 30 ** D30
+ PC , // PC 6 ** 31 ** D31
+ PC , // PC 5 ** 32 ** D32
+ PC , // PC 4 ** 33 ** D33
+ PC , // PC 3 ** 34 ** D34
+ PC , // PC 2 ** 35 ** D35
+ PC , // PC 1 ** 36 ** D36
+ PC , // PC 0 ** 37 ** D37
+ PD , // PD 7 ** 38 ** D38
+ PG , // PG 2 ** 39 ** D39
+ PG , // PG 1 ** 40 ** D40
+ PG , // PG 0 ** 41 ** D41
+ PL , // PL 7 ** 42 ** D42
+ PL , // PL 6 ** 43 ** D43
+ PL , // PL 5 ** 44 ** D44
+ PL , // PL 4 ** 45 ** D45
+ PL , // PL 3 ** 46 ** D46
+ PL , // PL 2 ** 47 ** D47
+ PL , // PL 1 ** 48 ** D48
+ PL , // PL 0 ** 49 ** D49
+ PB , // PB 3 ** 50 ** SPI_MISO
+ PB , // PB 2 ** 51 ** SPI_MOSI
+ PB , // PB 1 ** 52 ** SPI_SCK
+ PB , // PB 0 ** 53 ** SPI_SS
+ PF , // PF 0 ** 54 ** A0
+ PF , // PF 1 ** 55 ** A1
+ PF , // PF 2 ** 56 ** A2
+ PF , // PF 3 ** 57 ** A3
+ PF , // PF 4 ** 58 ** A4
+ PF , // PF 5 ** 59 ** A5
+ PF , // PF 6 ** 60 ** A6
+ PF , // PF 7 ** 61 ** A7
+ PK , // PK 0 ** 62 ** A8
+ PK , // PK 1 ** 63 ** A9
+ PK , // PK 2 ** 64 ** A10
+ PK , // PK 3 ** 65 ** A11
+ PK , // PK 4 ** 66 ** A12
+ PK , // PK 5 ** 67 ** A13
+ PK , // PK 6 ** 68 ** A14
+ PK , // PK 7 ** 69 ** A15
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+ // PIN IN PORT
+ // -------------------------------------------
+ _BV( 0 ) , // PE 0 ** 0 ** USART0_RX
+ _BV( 1 ) , // PE 1 ** 1 ** USART0_TX
+ _BV( 4 ) , // PE 4 ** 2 ** PWM2
+ _BV( 5 ) , // PE 5 ** 3 ** PWM3
+ _BV( 5 ) , // PG 5 ** 4 ** PWM4
+ _BV( 3 ) , // PE 3 ** 5 ** PWM5
+ _BV( 3 ) , // PH 3 ** 6 ** PWM6
+ _BV( 4 ) , // PH 4 ** 7 ** PWM7
+ _BV( 5 ) , // PH 5 ** 8 ** PWM8
+ _BV( 6 ) , // PH 6 ** 9 ** PWM9
+ _BV( 4 ) , // PB 4 ** 10 ** PWM10
+ _BV( 5 ) , // PB 5 ** 11 ** PWM11
+ _BV( 6 ) , // PB 6 ** 12 ** PWM12
+ _BV( 7 ) , // PB 7 ** 13 ** PWM13
+ _BV( 1 ) , // PJ 1 ** 14 ** USART3_TX
+ _BV( 0 ) , // PJ 0 ** 15 ** USART3_RX
+ _BV( 1 ) , // PH 1 ** 16 ** USART2_TX
+ _BV( 0 ) , // PH 0 ** 17 ** USART2_RX
+ _BV( 3 ) , // PD 3 ** 18 ** USART1_TX
+ _BV( 2 ) , // PD 2 ** 19 ** USART1_RX
+ _BV( 1 ) , // PD 1 ** 20 ** I2C_SDA
+ _BV( 0 ) , // PD 0 ** 21 ** I2C_SCL
+ _BV( 0 ) , // PA 0 ** 22 ** D22
+ _BV( 1 ) , // PA 1 ** 23 ** D23
+ _BV( 2 ) , // PA 2 ** 24 ** D24
+ _BV( 3 ) , // PA 3 ** 25 ** D25
+ _BV( 4 ) , // PA 4 ** 26 ** D26
+ _BV( 5 ) , // PA 5 ** 27 ** D27
+ _BV( 6 ) , // PA 6 ** 28 ** D28
+ _BV( 7 ) , // PA 7 ** 29 ** D29
+ _BV( 7 ) , // PC 7 ** 30 ** D30
+ _BV( 6 ) , // PC 6 ** 31 ** D31
+ _BV( 5 ) , // PC 5 ** 32 ** D32
+ _BV( 4 ) , // PC 4 ** 33 ** D33
+ _BV( 3 ) , // PC 3 ** 34 ** D34
+ _BV( 2 ) , // PC 2 ** 35 ** D35
+ _BV( 1 ) , // PC 1 ** 36 ** D36
+ _BV( 0 ) , // PC 0 ** 37 ** D37
+ _BV( 7 ) , // PD 7 ** 38 ** D38
+ _BV( 2 ) , // PG 2 ** 39 ** D39
+ _BV( 1 ) , // PG 1 ** 40 ** D40
+ _BV( 0 ) , // PG 0 ** 41 ** D41
+ _BV( 7 ) , // PL 7 ** 42 ** D42
+ _BV( 6 ) , // PL 6 ** 43 ** D43
+ _BV( 5 ) , // PL 5 ** 44 ** D44
+ _BV( 4 ) , // PL 4 ** 45 ** D45
+ _BV( 3 ) , // PL 3 ** 46 ** D46
+ _BV( 2 ) , // PL 2 ** 47 ** D47
+ _BV( 1 ) , // PL 1 ** 48 ** D48
+ _BV( 0 ) , // PL 0 ** 49 ** D49
+ _BV( 3 ) , // PB 3 ** 50 ** SPI_MISO
+ _BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI
+ _BV( 1 ) , // PB 1 ** 52 ** SPI_SCK
+ _BV( 0 ) , // PB 0 ** 53 ** SPI_SS
+ _BV( 0 ) , // PF 0 ** 54 ** A0
+ _BV( 1 ) , // PF 1 ** 55 ** A1
+ _BV( 2 ) , // PF 2 ** 56 ** A2
+ _BV( 3 ) , // PF 3 ** 57 ** A3
+ _BV( 4 ) , // PF 4 ** 58 ** A4
+ _BV( 5 ) , // PF 5 ** 59 ** A5
+ _BV( 6 ) , // PF 6 ** 60 ** A6
+ _BV( 7 ) , // PF 7 ** 61 ** A7
+ _BV( 0 ) , // PK 0 ** 62 ** A8
+ _BV( 1 ) , // PK 1 ** 63 ** A9
+ _BV( 2 ) , // PK 2 ** 64 ** A10
+ _BV( 3 ) , // PK 3 ** 65 ** A11
+ _BV( 4 ) , // PK 4 ** 66 ** A12
+ _BV( 5 ) , // PK 5 ** 67 ** A13
+ _BV( 6 ) , // PK 6 ** 68 ** A14
+ _BV( 7 ) , // PK 7 ** 69 ** A15
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+ // TIMERS
+ // -------------------------------------------
+ NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX
+ NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX
+ TIMER3B , // PE 4 ** 2 ** PWM2
+ TIMER3C , // PE 5 ** 3 ** PWM3
+ TIMER0B , // PG 5 ** 4 ** PWM4
+ TIMER3A , // PE 3 ** 5 ** PWM5
+ TIMER4A , // PH 3 ** 6 ** PWM6
+ TIMER4B , // PH 4 ** 7 ** PWM7
+ TIMER4C , // PH 5 ** 8 ** PWM8
+ TIMER2B , // PH 6 ** 9 ** PWM9
+ TIMER2A , // PB 4 ** 10 ** PWM10
+ TIMER1A , // PB 5 ** 11 ** PWM11
+ TIMER1B , // PB 6 ** 12 ** PWM12
+ TIMER0A , // PB 7 ** 13 ** PWM13
+ NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX
+ NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX
+ NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX
+ NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX
+ NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX
+ NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX
+ NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA
+ NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL
+ NOT_ON_TIMER , // PA 0 ** 22 ** D22
+ NOT_ON_TIMER , // PA 1 ** 23 ** D23
+ NOT_ON_TIMER , // PA 2 ** 24 ** D24
+ NOT_ON_TIMER , // PA 3 ** 25 ** D25
+ NOT_ON_TIMER , // PA 4 ** 26 ** D26
+ NOT_ON_TIMER , // PA 5 ** 27 ** D27
+ NOT_ON_TIMER , // PA 6 ** 28 ** D28
+ NOT_ON_TIMER , // PA 7 ** 29 ** D29
+ NOT_ON_TIMER , // PC 7 ** 30 ** D30
+ NOT_ON_TIMER , // PC 6 ** 31 ** D31
+ NOT_ON_TIMER , // PC 5 ** 32 ** D32
+ NOT_ON_TIMER , // PC 4 ** 33 ** D33
+ NOT_ON_TIMER , // PC 3 ** 34 ** D34
+ NOT_ON_TIMER , // PC 2 ** 35 ** D35
+ NOT_ON_TIMER , // PC 1 ** 36 ** D36
+ NOT_ON_TIMER , // PC 0 ** 37 ** D37
+ NOT_ON_TIMER , // PD 7 ** 38 ** D38
+ NOT_ON_TIMER , // PG 2 ** 39 ** D39
+ NOT_ON_TIMER , // PG 1 ** 40 ** D40
+ NOT_ON_TIMER , // PG 0 ** 41 ** D41
+ NOT_ON_TIMER , // PL 7 ** 42 ** D42
+ NOT_ON_TIMER , // PL 6 ** 43 ** D43
+ TIMER5C , // PL 5 ** 44 ** D44
+ TIMER5B , // PL 4 ** 45 ** D45
+ TIMER5A , // PL 3 ** 46 ** D46
+ NOT_ON_TIMER , // PL 2 ** 47 ** D47
+ NOT_ON_TIMER , // PL 1 ** 48 ** D48
+ NOT_ON_TIMER , // PL 0 ** 49 ** D49
+ NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO
+ NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI
+ NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK
+ NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS
+ NOT_ON_TIMER , // PF 0 ** 54 ** A0
+ NOT_ON_TIMER , // PF 1 ** 55 ** A1
+ NOT_ON_TIMER , // PF 2 ** 56 ** A2
+ NOT_ON_TIMER , // PF 3 ** 57 ** A3
+ NOT_ON_TIMER , // PF 4 ** 58 ** A4
+ NOT_ON_TIMER , // PF 5 ** 59 ** A5
+ NOT_ON_TIMER , // PF 6 ** 60 ** A6
+ NOT_ON_TIMER , // PF 7 ** 61 ** A7
+ NOT_ON_TIMER , // PK 0 ** 62 ** A8
+ NOT_ON_TIMER , // PK 1 ** 63 ** A9
+ NOT_ON_TIMER , // PK 2 ** 64 ** A10
+ NOT_ON_TIMER , // PK 3 ** 65 ** A11
+ NOT_ON_TIMER , // PK 4 ** 66 ** A12
+ NOT_ON_TIMER , // PK 5 ** 67 ** A13
+ NOT_ON_TIMER , // PK 6 ** 68 ** A14
+ NOT_ON_TIMER , // PK 7 ** 69 ** A15
+};
+#else
// these arrays map port names (e.g. port B) to the
// appropriate addresses for various functions (e.g. reading
// and writing)
-const uint8_t PROGMEM port_to_mode_PGM[] = {
+const uint16_t PROGMEM port_to_mode_PGM[] = {
NOT_A_PORT,
NOT_A_PORT,
&DDRB,
@@ -67,7 +367,7 @@ const uint8_t PROGMEM port_to_mode_PGM[] = {
&DDRD,
};
-const uint8_t PROGMEM port_to_output_PGM[] = {
+const uint16_t PROGMEM port_to_output_PGM[] = {
NOT_A_PORT,
NOT_A_PORT,
&PORTB,
@@ -75,7 +375,7 @@ const uint8_t PROGMEM port_to_output_PGM[] = {
&PORTD,
};
-const uint8_t PROGMEM port_to_input_PGM[] = {
+const uint16_t PROGMEM port_to_input_PGM[] = {
NOT_A_PORT,
NOT_A_PORT,
&PINB,
@@ -166,4 +466,4 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
NOT_ON_TIMER,
NOT_ON_TIMER,
};
-
+#endif
diff --git a/cores/arduino/pins_arduino.h b/cores/arduino/pins_arduino.h
index e0b7add..c7e40fd 100644
--- a/cores/arduino/pins_arduino.h
+++ b/cores/arduino/pins_arduino.h
@@ -39,14 +39,25 @@
#define TIMER2A 6
#define TIMER2B 7
-extern const uint8_t PROGMEM port_to_mode_PGM[];
-extern const uint8_t PROGMEM port_to_input_PGM[];
-extern const uint8_t PROGMEM port_to_output_PGM[];
+#define TIMER3A 8
+#define TIMER3B 9
+#define TIMER3C 10
+#define TIMER4A 11
+#define TIMER4B 12
+#define TIMER4C 13
+#define TIMER5A 14
+#define TIMER5B 15
+#define TIMER5C 16
+
+// On the ATmega1280, the addresses of some of the port registers are
+// greater than 255, so we can't store them in uint8_t's.
+extern const uint16_t PROGMEM port_to_mode_PGM[];
+extern const uint16_t PROGMEM port_to_input_PGM[];
+extern const uint16_t PROGMEM port_to_output_PGM[];
extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
+// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
-
extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
// Get the bit location within the hardware port of the given virtual pin.
@@ -58,8 +69,8 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
#define analogInPinToBit(P) (P)
-#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_output_PGM + (P))) )
-#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_input_PGM + (P))) )
-#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_mode_PGM + (P))) )
+#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
+#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
+#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
#endif
diff --git a/cores/arduino/wiring.c b/cores/arduino/wiring.c
index aaf7b86..73c26f2 100755
--- a/cores/arduino/wiring.c
+++ b/cores/arduino/wiring.c
@@ -196,6 +196,17 @@ void init()
sbi(TCCR2A, WGM20);
#endif
+#if defined(__AVR_ATmega1280__)
+ // set timer 3, 4, 5 prescale factor to 64
+ sbi(TCCR3B, CS31); sbi(TCCR3B, CS30);
+ sbi(TCCR4B, CS41); sbi(TCCR4B, CS40);
+ sbi(TCCR5B, CS51); sbi(TCCR5B, CS50);
+ // put timer 3, 4, 5 in 8-bit phase correct pwm mode
+ sbi(TCCR3A, WGM30);
+ sbi(TCCR4A, WGM40);
+ sbi(TCCR5A, WGM50);
+#endif
+
// set a2d prescale factor to 128
// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
// XXX: this will not work properly for other clock speeds, and
diff --git a/cores/arduino/wiring_analog.c b/cores/arduino/wiring_analog.c
index f3767d2..529ad52 100755
--- a/cores/arduino/wiring_analog.c
+++ b/cores/arduino/wiring_analog.c
@@ -37,12 +37,18 @@ void analogReference(uint8_t mode)
int analogRead(uint8_t pin)
{
- uint8_t low, high, ch = analogInPinToBit(pin);
+ uint8_t low, high;
// set the analog reference (high two bits of ADMUX) and select the
// channel (low 4 bits). this also sets ADLAR (left-adjust result)
// to 0 (the default).
- ADMUX = (analog_reference << 6) | (pin & 0x0f);
+ ADMUX = (analog_reference << 6) | (pin & 0x07);
+
+#if defined(__AVR_ATmega1280__)
+ // the MUX5 bit of ADCSRB selects whether we're reading from channels
+ // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high).
+ ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
+#endif
// without a delay, we seem to read from the wrong channel
//delay(1);
@@ -95,23 +101,23 @@ void analogWrite(uint8_t pin, int val)
OCR2 = val;
#else
} else if (digitalPinToTimer(pin) == TIMER0A) {
- if (val == 0) {
- digitalWrite(pin, LOW);
- } else {
- // connect pwm to pin on timer 0, channel A
- sbi(TCCR0A, COM0A1);
- // set pwm duty
- OCR0A = val;
- }
+ if (val == 0) {
+ digitalWrite(pin, LOW);
+ } else {
+ // connect pwm to pin on timer 0, channel A
+ sbi(TCCR0A, COM0A1);
+ // set pwm duty
+ OCR0A = val;
+ }
} else if (digitalPinToTimer(pin) == TIMER0B) {
- if (val == 0) {
- digitalWrite(pin, LOW);
- } else {
- // connect pwm to pin on timer 0, channel B
- sbi(TCCR0A, COM0B1);
- // set pwm duty
- OCR0B = val;
- }
+ if (val == 0) {
+ digitalWrite(pin, LOW);
+ } else {
+ // connect pwm to pin on timer 0, channel B
+ sbi(TCCR0A, COM0B1);
+ // set pwm duty
+ OCR0B = val;
+ }
} else if (digitalPinToTimer(pin) == TIMER2A) {
// connect pwm to pin on timer 2, channel A
sbi(TCCR2A, COM2A1);
@@ -123,6 +129,49 @@ void analogWrite(uint8_t pin, int val)
// set pwm duty
OCR2B = val;
#endif
+#if defined(__AVR_ATmega1280__)
+ // XXX: need to handle other timers here
+ } else if (digitalPinToTimer(pin) == TIMER3A) {
+ // connect pwm to pin on timer 3, channel A
+ sbi(TCCR3A, COM3A1);
+ // set pwm duty
+ OCR3A = val;
+ } else if (digitalPinToTimer(pin) == TIMER3B) {
+ // connect pwm to pin on timer 3, channel B
+ sbi(TCCR3A, COM3B1);
+ // set pwm duty
+ OCR3B = val;
+ } else if (digitalPinToTimer(pin) == TIMER3C) {
+ // connect pwm to pin on timer 3, channel C
+ sbi(TCCR3A, COM3C1);
+ // set pwm duty
+ OCR3C = val;
+ } else if (digitalPinToTimer(pin) == TIMER4A) {
+ // connect pwm to pin on timer 4, channel A
+ sbi(TCCR4A, COM4A1);
+ // set pwm duty
+ OCR4A = val;
+ } else if (digitalPinToTimer(pin) == TIMER4B) {
+ // connect pwm to pin on timer 4, channel B
+ sbi(TCCR4A, COM4B1);
+ // set pwm duty
+ OCR4B = val;
+ } else if (digitalPinToTimer(pin) == TIMER4C) {
+ // connect pwm to pin on timer 4, channel C
+ sbi(TCCR4A, COM4C1);
+ // set pwm duty
+ OCR4C = val;
+ } else if (digitalPinToTimer(pin) == TIMER5A) {
+ // connect pwm to pin on timer 5, channel A
+ sbi(TCCR5A, COM5A1);
+ // set pwm duty
+ OCR5A = val;
+ } else if (digitalPinToTimer(pin) == TIMER5B) {
+ // connect pwm to pin on timer 5, channel B
+ sbi(TCCR5A, COM5B1);
+ // set pwm duty
+ OCR5B = val;
+#endif
} else if (val < 128)
digitalWrite(pin, LOW);
else
diff --git a/cores/arduino/wiring_digital.c b/cores/arduino/wiring_digital.c
index 3044e18..1cdbf6c 100755
--- a/cores/arduino/wiring_digital.c
+++ b/cores/arduino/wiring_digital.c
@@ -61,6 +61,18 @@ static inline void turnOffPWM(uint8_t timer)
if (timer == TIMER2A) cbi(TCCR2A, COM2A1);
if (timer == TIMER2B) cbi(TCCR2A, COM2B1);
#endif
+
+#if defined(__AVR_ATmega1280__)
+ if (timer == TIMER3A) cbi(TCCR3A, COM3A1);
+ if (timer == TIMER3B) cbi(TCCR3A, COM3B1);
+ if (timer == TIMER3C) cbi(TCCR3A, COM3C1);
+ if (timer == TIMER4A) cbi(TCCR4A, COM4A1);
+ if (timer == TIMER4B) cbi(TCCR4A, COM4B1);
+ if (timer == TIMER4C) cbi(TCCR4A, COM4C1);
+ if (timer == TIMER5A) cbi(TCCR5A, COM5A1);
+ if (timer == TIMER5B) cbi(TCCR5A, COM5B1);
+ if (timer == TIMER5C) cbi(TCCR5A, COM5C1);
+#endif
}
void digitalWrite(uint8_t pin, uint8_t val)
diff --git a/cores/arduino/wiring_private.h b/cores/arduino/wiring_private.h
index b30c1f0..2dfe552 100755
--- a/cores/arduino/wiring_private.h
+++ b/cores/arduino/wiring_private.h
@@ -46,8 +46,18 @@ extern "C"{
#define EXTERNAL_INT_0 0
#define EXTERNAL_INT_1 1
+#define EXTERNAL_INT_2 2
+#define EXTERNAL_INT_3 3
+#define EXTERNAL_INT_4 4
+#define EXTERNAL_INT_5 5
+#define EXTERNAL_INT_6 6
+#define EXTERNAL_INT_7 7
+#if defined(__AVR_ATmega1280__)
+#define EXTERNAL_NUM_INTERRUPTS 8
+#else
#define EXTERNAL_NUM_INTERRUPTS 2
+#endif
typedef void (*voidFuncPtr)(void);