diff options
Diffstat (limited to 'cores/arduino/USBAPI.h')
| -rw-r--r-- | cores/arduino/USBAPI.h | 62 |
1 files changed, 55 insertions, 7 deletions
diff --git a/cores/arduino/USBAPI.h b/cores/arduino/USBAPI.h index 4abd961..4072772 100644 --- a/cores/arduino/USBAPI.h +++ b/cores/arduino/USBAPI.h @@ -32,6 +32,12 @@ typedef unsigned long u32; #include "Arduino.h" +// This definitions is usefull if you want to reduce the EP_SIZE to 16 +// at the moment only 64 and 16 as EP_SIZE for all EPs are supported except the control endpoint +#ifndef USB_EP_SIZE +#define USB_EP_SIZE 64 +#endif + #if defined(USBCON) #include "USBDesc.h" @@ -41,13 +47,13 @@ typedef unsigned long u32; //================================================================================ // USB -#define EP_TYPE_CONTROL 0x00 -#define EP_TYPE_BULK_IN 0x81 -#define EP_TYPE_BULK_OUT 0x80 -#define EP_TYPE_INTERRUPT_IN 0xC1 -#define EP_TYPE_INTERRUPT_OUT 0xC0 -#define EP_TYPE_ISOCHRONOUS_IN 0x41 -#define EP_TYPE_ISOCHRONOUS_OUT 0x40 +#define EP_TYPE_CONTROL (0x00) +#define EP_TYPE_BULK_IN ((1<<EPTYPE1) | (1<<EPDIR)) +#define EP_TYPE_BULK_OUT (1<<EPTYPE1) +#define EP_TYPE_INTERRUPT_IN ((1<<EPTYPE1) | (1<<EPTYPE0) | (1<<EPDIR)) +#define EP_TYPE_INTERRUPT_OUT ((1<<EPTYPE1) | (1<<EPTYPE0)) +#define EP_TYPE_ISOCHRONOUS_IN ((1<<EPTYPE0) | (1<<EPDIR)) +#define EP_TYPE_ISOCHRONOUS_OUT (1<<EPTYPE0) class USBDevice_ { @@ -92,6 +98,7 @@ public: virtual int available(void); virtual int peek(void); virtual int read(void); + int availableForWrite(void); virtual void flush(void); virtual size_t write(uint8_t); virtual size_t write(const uint8_t*, size_t); @@ -101,6 +108,46 @@ public: volatile uint8_t _rx_buffer_head; volatile uint8_t _rx_buffer_tail; unsigned char _rx_buffer[SERIAL_BUFFER_SIZE]; + + // This method allows processing "SEND_BREAK" requests sent by + // the USB host. Those requests indicate that the host wants to + // send a BREAK signal and are accompanied by a single uint16_t + // value, specifying the duration of the break. The value 0 + // means to end any current break, while the value 0xffff means + // to start an indefinite break. + // readBreak() will return the value of the most recent break + // request, but will return it at most once, returning -1 when + // readBreak() is called again (until another break request is + // received, which is again returned once). + // This also mean that if two break requests are received + // without readBreak() being called in between, the value of the + // first request is lost. + // Note that the value returned is a long, so it can return + // 0-0xffff as well as -1. + int32_t readBreak(); + + // These return the settings specified by the USB host for the + // serial port. These aren't really used, but are offered here + // in case a sketch wants to act on these settings. + uint32_t baud(); + uint8_t stopbits(); + uint8_t paritytype(); + uint8_t numbits(); + bool dtr(); + bool rts(); + enum { + ONE_STOP_BIT = 0, + ONE_AND_HALF_STOP_BIT = 1, + TWO_STOP_BITS = 2, + }; + enum { + NO_PARITY = 0, + ODD_PARITY = 1, + EVEN_PARITY = 2, + MARK_PARITY = 3, + SPACE_PARITY = 4, + }; + }; extern Serial_ Serial; @@ -148,6 +195,7 @@ int USB_SendControl(uint8_t flags, const void* d, int len); int USB_RecvControl(void* d, int len); uint8_t USB_Available(uint8_t ep); +uint8_t USB_SendSpace(uint8_t ep); int USB_Send(uint8_t ep, const void* data, int len); // blocking int USB_Recv(uint8_t ep, void* data, int len); // non-blocking int USB_Recv(uint8_t ep); // non-blocking |