1 files changed, 0 insertions, 219 deletions
diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp
deleted file mode 100755
index 1af6a66..0000000
--- a/cores/arduino/HardwareSerial.cpp
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
-  HardwareSerial.cpp - Hardware serial library for Wiring
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-  
-  Modified 23 November 2006 by David A. Mellis
-*/
-
-#include <stdio.h>
-#include <string.h>
-#include <inttypes.h>
-#include "wiring.h"
-#include "wiring_private.h"
-
-#include "HardwareSerial.h"
-
-// Define constants and variables for buffering incoming serial data.  We're
-// using a ring buffer (I think), in which rx_buffer_head is the index of the
-// location to which to write the next incoming character and rx_buffer_tail
-// is the index of the location from which to read.
-#define RX_BUFFER_SIZE 128
-
-struct ring_buffer {
-  unsigned char buffer[RX_BUFFER_SIZE];
-  int head;
-  int tail;
-};
-
-ring_buffer rx_buffer = { { 0 }, 0, 0 };
-
-#if defined(__AVR_ATmega1280__)
-ring_buffer rx_buffer1 = { { 0 }, 0, 0 };
-ring_buffer rx_buffer2 = { { 0 }, 0, 0 };
-ring_buffer rx_buffer3 = { { 0 }, 0, 0 };
-#endif
-
-inline void store_char(unsigned char c, ring_buffer *rx_buffer)
-{
-  int i = (rx_buffer->head + 1) % RX_BUFFER_SIZE;
-
-  // if we should be storing the received character into the location
-  // just before the tail (meaning that the head would advance to the
-  // current location of the tail), we're about to overflow the buffer
-  // and so we don't write the character or advance the head.
-  if (i != rx_buffer->tail) {
-    rx_buffer->buffer[rx_buffer->head] = c;
-    rx_buffer->head = i;
-  }
-}
-
-#if defined(__AVR_ATmega1280__)
-
-SIGNAL(SIG_USART0_RECV)
-{
-  unsigned char c = UDR0;
-  store_char(c, &rx_buffer);
-}
-
-SIGNAL(SIG_USART1_RECV)
-{
-  unsigned char c = UDR1;
-  store_char(c, &rx_buffer1);
-}
-
-SIGNAL(SIG_USART2_RECV)
-{
-  unsigned char c = UDR2;
-  store_char(c, &rx_buffer2);
-}
-
-SIGNAL(SIG_USART3_RECV)
-{
-  unsigned char c = UDR3;
-  store_char(c, &rx_buffer3);
-}
-
-#else
-
-#if defined(__AVR_ATmega8__)
-SIGNAL(SIG_UART_RECV)
-#else
-SIGNAL(USART_RX_vect)
-#endif
-{
-#if defined(__AVR_ATmega8__)
-  unsigned char c = UDR;
-#else
-  unsigned char c = UDR0;
-#endif
-  store_char(c, &rx_buffer);
-}
-
-#endif
-
-// Constructors ////////////////////////////////////////////////////////////////
-
-HardwareSerial::HardwareSerial(ring_buffer *rx_buffer,
-  volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
-  volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
-  volatile uint8_t *udr,
-  uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x)
-{
-  _rx_buffer = rx_buffer;
-  _ubrrh = ubrrh;
-  _ubrrl = ubrrl;
-  _ucsra = ucsra;
-  _ucsrb = ucsrb;
-  _udr = udr;
-  _rxen = rxen;
-  _txen = txen;
-  _rxcie = rxcie;
-  _udre = udre;
-  _u2x = u2x;
-}
-
-// Public Methods //////////////////////////////////////////////////////////////
-
-void HardwareSerial::begin(long baud)
-{
-  uint16_t baud_setting;
-  bool use_u2x;
-
-  // U2X mode is needed for baud rates higher than (CPU Hz / 16)
-  if (baud > F_CPU / 16) {
-    use_u2x = true;
-  } else {
-    // figure out if U2X mode would allow for a better connection
-    
-    // calculate the percent difference between the baud-rate specified and
-    // the real baud rate for both U2X and non-U2X mode (0-255 error percent)
-    uint8_t nonu2x_baud_error = abs((int)(255-((F_CPU/(16*(((F_CPU/8/baud-1)/2)+1))*255)/baud)));
-    uint8_t u2x_baud_error = abs((int)(255-((F_CPU/(8*(((F_CPU/4/baud-1)/2)+1))*255)/baud)));
-    
-    // prefer non-U2X mode because it handles clock skew better
-    use_u2x = (nonu2x_baud_error > u2x_baud_error);
-  }
-  
-  if (use_u2x) {
-    *_ucsra = 1 << _u2x;
-    baud_setting = (F_CPU / 4 / baud - 1) / 2;
-  } else {
-    *_ucsra = 0;
-    baud_setting = (F_CPU / 8 / baud - 1) / 2;
-  }
-
-  // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
-  *_ubrrh = baud_setting >> 8;
-  *_ubrrl = baud_setting;
-
-  sbi(*_ucsrb, _rxen);
-  sbi(*_ucsrb, _txen);
-  sbi(*_ucsrb, _rxcie);
-}
-
-uint8_t HardwareSerial::available(void)
-{
-  return (RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE;
-}
-
-int HardwareSerial::read(void)
-{
-  // if the head isn't ahead of the tail, we don't have any characters
-  if (_rx_buffer->head == _rx_buffer->tail) {
-    return -1;
-  } else {
-    unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
-    _rx_buffer->tail = (_rx_buffer->tail + 1) % RX_BUFFER_SIZE;
-    return c;
-  }
-}
-
-void HardwareSerial::flush()
-{
-  // don't reverse this or there may be problems if the RX interrupt
-  // occurs after reading the value of rx_buffer_head but before writing
-  // the value to rx_buffer_tail; the previous value of rx_buffer_head
-  // may be written to rx_buffer_tail, making it appear as if the buffer
-  // don't reverse this or there may be problems if the RX interrupt
-  // occurs after reading the value of rx_buffer_head but before writing
-  // the value to rx_buffer_tail; the previous value of rx_buffer_head
-  // may be written to rx_buffer_tail, making it appear as if the buffer
-  // were full, not empty.
-  _rx_buffer->head = _rx_buffer->tail;
-}
-
-void HardwareSerial::write(uint8_t c)
-{
-  while (!((*_ucsra) & (1 << _udre)))
-    ;
-
-  *_udr = c;
-}
-
-// Preinstantiate Objects //////////////////////////////////////////////////////
-
-#if defined(__AVR_ATmega8__)
-HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE, U2X);
-#else
-HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0);
-#endif
-
-#if defined(__AVR_ATmega1280__)
-HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1, U2X1);
-HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2, U2X2);
-HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3, U2X3);
-#endif