aboutsummaryrefslogtreecommitdiff
path: root/bootloaders/optiboot/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'bootloaders/optiboot/Makefile')
-rw-r--r--bootloaders/optiboot/Makefile306
1 files changed, 259 insertions, 47 deletions
diff --git a/bootloaders/optiboot/Makefile b/bootloaders/optiboot/Makefile
index 0fd6005..b9f3ed5 100644
--- a/bootloaders/optiboot/Makefile
+++ b/bootloaders/optiboot/Makefile
@@ -19,13 +19,70 @@
# program name should not be changed...
PROGRAM = optiboot
+# The default behavior is to build using tools that are in the users
+# current path variables, but we can also build using an installed
+# Arduino user IDE setup, or the Arduino source tree.
+# Uncomment this next lines to build within the arduino environment,
+# using the arduino-included avrgcc toolset (mac and pc)
+# ENV ?= arduino
+# ENV ?= arduinodev
+# OS ?= macosx
+# OS ?= windows
+
+
# enter the parameters for the avrdude isp tool
ISPTOOL = stk500v2
ISPPORT = usb
ISPSPEED = -b 115200
MCU_TARGET = atmega168
-LDSECTION = --section-start=.text=0x3e00
+LDSECTIONS = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe
+
+# Build environments
+# Start of some ugly makefile-isms to allow optiboot to be built
+# in several different environments. See the README.TXT file for
+# details.
+
+# default
+fixpath = $(1)
+
+ifeq ($(ENV), arduino)
+# For Arduino, we assume that we're connected to the optiboot directory
+# included with the arduino distribution, which means that the full set
+# of avr-tools are "right up there" in standard places.
+TOOLROOT = ../../../tools
+GCCROOT = $(TOOLROOT)/avr/bin/
+AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
+
+ifeq ($(OS), windows)
+# On windows, SOME of the tool paths will need to have backslashes instead
+# of forward slashes (because they use windows cmd.exe for execution instead
+# of a unix/mingw shell?) We also have to ensure that a consistent shell
+# is used even if a unix shell is installed (ie as part of WINAVR)
+fixpath = $(subst /,\,$1)
+SHELL = cmd.exe
+endif
+
+else ifeq ($(ENV), arduinodev)
+# Arduino IDE source code environment. Use the unpacked compilers created
+# by the build (you'll need to do "ant build" first.)
+ifeq ($(OS), macosx)
+TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools
+endif
+ifeq ($(OS), windows)
+TOOLROOT = ../../../../build/windows/work/hardware/tools
+endif
+
+GCCROOT = $(TOOLROOT)/avr/bin/
+AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
+
+else
+GCCROOT =
+AVRDUDE_CONF =
+endif
+#
+# End of build environment code.
+
# the efuse should really be 0xf8; since, however, only the lower
# three bits of that byte are used on the atmega168, avrdude gets
@@ -33,14 +90,17 @@ LDSECTION = --section-start=.text=0x3e00
# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
#
# similarly, the lock bits should be 0xff instead of 0x3f (to
-# unlock the bootloader section) and 0xcf instead of 0x0f (to
+# unlock the bootloader section) and 0xcf instead of 0x2f (to
# lock it), but since the high two bits of the lock byte are
# unused, avrdude would get confused.
-ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
--e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
-ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
--U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
+ISPFUSES = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
+ -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+ -e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \
+ -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
+ISPFLASH = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
+ -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+ -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m
STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
@@ -53,15 +113,27 @@ OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls
DEFS =
LIBS =
-CC = avr-gcc
+CC = $(GCCROOT)avr-gcc
# Override is only needed by avr-lib build system.
override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
-override LDFLAGS = -Wl,$(LDSECTION) -Wl,--relax -nostartfiles
+override LDFLAGS = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
+OBJCOPY = $(GCCROOT)avr-objcopy
+OBJDUMP = $(call fixpath,$(GCCROOT)avr-objdump)
+
+SIZE = $(GCCROOT)avr-size
+
+# Test platforms
+# Virtual boot block test
+virboot328: TARGET = atmega328
+virboot328: MCU_TARGET = atmega328p
+virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT'
+virboot328: AVR_FREQ = 16000000L
+virboot328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
+virboot328: $(PROGRAM)_atmega328.hex
+virboot328: $(PROGRAM)_atmega328.lst
# 20MHz clocked platforms
#
@@ -69,6 +141,7 @@ OBJDUMP = avr-objdump
#
pro20: TARGET = pro_20mhz
+pro20: MCU_TARGET = atmega168
pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
pro20: AVR_FREQ = 20000000L
pro20: $(PROGRAM)_pro_20mhz.hex
@@ -76,9 +149,12 @@ pro20: $(PROGRAM)_pro_20mhz.lst
pro20_isp: pro20
pro20_isp: TARGET = pro_20mhz
-pro20_isp: HFUSE = DD # 2.7V brownout
-pro20_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
-pro20_isp: EFUSE = 02 # 512 byte boot
+# 2.7V brownout
+pro20_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro20_isp: LFUSE = C6
+# 512 byte boot
+pro20_isp: EFUSE = 04
pro20_isp: isp
# 16MHz clocked platforms
@@ -87,6 +163,7 @@ pro20_isp: isp
#
pro16: TARGET = pro_16MHz
+pro16: MCU_TARGET = atmega168
pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
pro16: AVR_FREQ = 16000000L
pro16: $(PROGRAM)_pro_16MHz.hex
@@ -94,14 +171,37 @@ pro16: $(PROGRAM)_pro_16MHz.lst
pro16_isp: pro16
pro16_isp: TARGET = pro_16MHz
-pro16_isp: HFUSE = DD # 2.7V brownout
-pro16_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
-pro16_isp: EFUSE = 02 # 512 byte boot
+# 2.7V brownout
+pro16_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro16_isp: LFUSE = C6
+# 512 byte boot
+pro16_isp: EFUSE = 04
pro16_isp: isp
-# Diecimila and NG use identical bootloaders
+# Diecimila, Duemilanove with m168, and NG use identical bootloaders
+# Call it "atmega168" for generality and clarity, keep "diecimila" for
+# backward compatibility of makefile
#
+atmega168: TARGET = atmega168
+atmega168: MCU_TARGET = atmega168
+atmega168: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega168: AVR_FREQ = 16000000L
+atmega168: $(PROGRAM)_atmega168.hex
+atmega168: $(PROGRAM)_atmega168.lst
+
+atmega168_isp: atmega168
+atmega168_isp: TARGET = atmega168
+# 2.7V brownout
+atmega168_isp: HFUSE = DD
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega168_isp: LFUSE = FF
+# 512 byte boot
+atmega168_isp: EFUSE = 04
+atmega168_isp: isp
+
diecimila: TARGET = diecimila
+diecimila: MCU_TARGET = atmega168
diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
diecimila: AVR_FREQ = 16000000L
diecimila: $(PROGRAM)_diecimila.hex
@@ -109,85 +209,188 @@ diecimila: $(PROGRAM)_diecimila.lst
diecimila_isp: diecimila
diecimila_isp: TARGET = diecimila
-diecimila_isp: HFUSE = DD # 2.7V brownout
-diecimila_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
-diecimila_isp: EFUSE = 02 # 512 byte boot
+# 2.7V brownout
+diecimila_isp: HFUSE = DD
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+diecimila_isp: LFUSE = FF
+# 512 byte boot
+diecimila_isp: EFUSE = 04
diecimila_isp: isp
atmega328: TARGET = atmega328
atmega328: MCU_TARGET = atmega328p
atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
atmega328: AVR_FREQ = 16000000L
-atmega328: LDSECTION = --section-start=.text=0x7e00
+atmega328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
atmega328: $(PROGRAM)_atmega328.hex
atmega328: $(PROGRAM)_atmega328.lst
atmega328_isp: atmega328
atmega328_isp: TARGET = atmega328
atmega328_isp: MCU_TARGET = atmega328p
-atmega328_isp: HFUSE = DE # 512 byte boot
-atmega328_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
-atmega328_isp: EFUSE = 05 # 2.7V brownout
+# 512 byte boot, SPIEN
+atmega328_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega328_isp: LFUSE = FF
+# 2.7V brownout
+atmega328_isp: EFUSE = 05
atmega328_isp: isp
+# Sanguino has a minimum boot size of 1024 bytes, so enable extra functions
+#
+sanguino: TARGET = atmega644p
+sanguino: MCU_TARGET = atmega644p
+sanguino: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT'
+sanguino: AVR_FREQ = 16000000L
+sanguino: LDSECTIONS = -Wl,--section-start=.text=0xfc00
+sanguino: $(PROGRAM)_atmega644p.hex
+sanguino: $(PROGRAM)_atmega644p.lst
+
+sanguino_isp: sanguino
+sanguino_isp: TARGET = atmega644p
+sanguino_isp: MCU_TARGET = atmega644p
+# 1024 byte boot
+sanguino_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+sanguino_isp: LFUSE = FF
+# 2.7V brownout
+sanguino_isp: EFUSE = 05
+sanguino_isp: isp
+
+# Mega has a minimum boot size of 1024 bytes, so enable extra functions
+#mega: TARGET = atmega1280
+mega: MCU_TARGET = atmega1280
+mega: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT'
+mega: AVR_FREQ = 16000000L
+mega: LDSECTIONS = -Wl,--section-start=.text=0x1fc00
+mega: $(PROGRAM)_atmega1280.hex
+mega: $(PROGRAM)_atmega1280.lst
+
+mega_isp: mega
+mega_isp: TARGET = atmega1280
+mega_isp: MCU_TARGET = atmega1280
+# 1024 byte boot
+mega_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+mega_isp: LFUSE = FF
+# 2.7V brownout
+mega_isp: EFUSE = 05
+mega_isp: isp
+
+# ATmega8
+#
+atmega8: TARGET = atmega8
+atmega8: MCU_TARGET = atmega8
+atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega8: AVR_FREQ = 16000000L
+atmega8: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
+atmega8: $(PROGRAM)_atmega8.hex
+atmega8: $(PROGRAM)_atmega8.lst
+
+atmega8_isp: atmega8
+atmega8_isp: TARGET = atmega8
+atmega8_isp: MCU_TARGET = atmega8
+# SPIEN, CKOPT, Bootsize=512B
+atmega8_isp: HFUSE = CC
+# 2.7V brownout, Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega8_isp: LFUSE = BF
+atmega8_isp: isp
+
+# ATmega88
+#
+atmega88: TARGET = atmega88
+atmega88: MCU_TARGET = atmega88
+atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
+atmega88: AVR_FREQ = 16000000L
+atmega88: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe
+atmega88: $(PROGRAM)_atmega88.hex
+atmega88: $(PROGRAM)_atmega88.lst
+
+atmega88_isp: atmega88
+atmega88_isp: TARGET = atmega88
+atmega88_isp: MCU_TARGET = atmega88
+# 2.7V brownout
+atmega88_isp: HFUSE = DD
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atemga88_isp: LFUSE = FF
+# 512 byte boot
+atmega88_isp: EFUSE = 04
+atmega88_isp: isp
+
+
# 8MHz clocked platforms
#
# These are capable of 115200 baud
#
lilypad: TARGET = lilypad
-lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
+lilypad: MCU_TARGET = atmega168
+lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
lilypad: AVR_FREQ = 8000000L
lilypad: $(PROGRAM)_lilypad.hex
lilypad: $(PROGRAM)_lilypad.lst
lilypad_isp: lilypad
lilypad_isp: TARGET = lilypad
-lilypad_isp: HFUSE = DD # 2.7V brownout
-lilypad_isp: LFUSE = E2 # Internal 8MHz osc (8MHz) Slow rising power
-lilypad_isp: EFUSE = 02 # 512 byte boot
+# 2.7V brownout
+lilypad_isp: HFUSE = DD
+# Internal 8MHz osc (8MHz) Slow rising power
+lilypad_isp: LFUSE = E2
+# 512 byte boot
+lilypad_isp: EFUSE = 04
lilypad_isp: isp
lilypad_resonator: TARGET = lilypad_resonator
-lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
+lilypad_resonator: MCU_TARGET = atmega168
+lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
lilypad_resonator: AVR_FREQ = 8000000L
lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex
lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst
lilypad_resonator_isp: lilypad_resonator
lilypad_resonator_isp: TARGET = lilypad_resonator
-lilypad_resonator_isp: HFUSE = DD # 2.7V brownout
-lilypad_resonator_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
-lilypad_resonator_isp: EFUSE = 02 # 512 byte boot
+# 2.7V brownout
+lilypad_resonator_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+lilypad_resonator_isp: LFUSE = C6
+# 512 byte boot
+lilypad_resonator_isp: EFUSE = 04
lilypad_resonator_isp: isp
pro8: TARGET = pro_8MHz
-pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
+pro8: MCU_TARGET = atmega168
+pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
pro8: AVR_FREQ = 8000000L
pro8: $(PROGRAM)_pro_8MHz.hex
pro8: $(PROGRAM)_pro_8MHz.lst
pro8_isp: pro8
pro8_isp: TARGET = pro_8MHz
-pro8_isp: HFUSE = DD # 2.7V brownout
-pro8_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
-pro8_isp: EFUSE = 02 # 512 byte boot
+# 2.7V brownout
+pro8_isp: HFUSE = DD
+# Full swing xtal (20MHz) 258CK/14CK+4.1ms
+pro8_isp: LFUSE = C6
+# 512 byte boot
+pro8_isp: EFUSE = 04
pro8_isp: isp
atmega328_pro8: TARGET = atmega328_pro_8MHz
atmega328_pro8: MCU_TARGET = atmega328p
atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
atmega328_pro8: AVR_FREQ = 8000000L
-atmega328_pro8: LDSECTION = --section-start=.text=0x7e00
+atmega328_pro8: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe
atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst
atmega328_pro8_isp: atmega328_pro8
atmega328_pro8_isp: TARGET = atmega328_pro_8MHz
atmega328_pro8_isp: MCU_TARGET = atmega328p
-atmega328_pro8_isp: HFUSE = DE # 512 byte boot
-atmega328_pro8_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
-atmega328_pro8_isp: EFUSE = 05 # 2.7V brownout
+# 512 byte boot, SPIEN
+atmega328_pro8_isp: HFUSE = DE
+# Low power xtal (16MHz) 16KCK/14CK+65ms
+atmega328_pro8_isp: LFUSE = FF
+# 2.7V brownout
+atmega328_pro8_isp: EFUSE = 05
atmega328_pro8_isp: isp
# 1MHz clocked platforms
@@ -200,18 +403,26 @@ luminet: MCU_TARGET = attiny84
luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600'
luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION'
luminet: AVR_FREQ = 1000000L
-luminet: LDSECTION = --section-start=.text=0x1d00
+luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe
luminet: $(PROGRAM)_luminet.hex
luminet: $(PROGRAM)_luminet.lst
luminet_isp: luminet
luminet_isp: TARGET = luminet
luminet_isp: MCU_TARGET = attiny84
-luminet_isp: HFUSE = DF # Brownout disabled
-luminet_isp: LFUSE = 62 # 1MHz internal oscillator, slowly rising power
-luminet_isp: EFUSE = FE # Self-programming enable
+# Brownout disabled
+luminet_isp: HFUSE = DF
+# 1MHz internal oscillator, slowly rising power
+luminet_isp: LFUSE = 62
+# Self-programming enable
+luminet_isp: EFUSE = FE
luminet_isp: isp
+#
+# Generic build instructions
+#
+#
+
isp: $(TARGET)
$(ISPFUSES)
$(ISPFLASH)
@@ -222,6 +433,7 @@ isp-stk500: $(PROGRAM)_$(TARGET).hex
%.elf: $(OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+ $(SIZE) $@
clean:
rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
@@ -230,10 +442,10 @@ clean:
$(OBJDUMP) -h -S $< > $@
%.hex: %.elf
- $(OBJCOPY) -j .text -j .data -O ihex $< $@
+ $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@
%.srec: %.elf
- $(OBJCOPY) -j .text -j .data -O srec $< $@
+ $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@
%.bin: %.elf
- $(OBJCOPY) -j .text -j .data -O binary $< $@
+ $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-23 00:07:53 +0000