diff options
Diffstat (limited to 'bootloaders/optiboot/Makefile')
| -rw-r--r-- | bootloaders/optiboot/Makefile | 451 |
1 files changed, 451 insertions, 0 deletions
diff --git a/bootloaders/optiboot/Makefile b/bootloaders/optiboot/Makefile new file mode 100644 index 0000000..b9f3ed5 --- /dev/null +++ b/bootloaders/optiboot/Makefile @@ -0,0 +1,451 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ +# +# Instructions +# +# To make bootloader .hex file: +# make diecimila +# make lilypad +# make ng +# etc... +# +# To burn bootloader .hex file: +# make diecimila_isp +# make lilypad_isp +# make ng_isp +# etc... + +# program name should not be changed... +PROGRAM = optiboot + +# The default behavior is to build using tools that are in the users +# current path variables, but we can also build using an installed +# Arduino user IDE setup, or the Arduino source tree. +# Uncomment this next lines to build within the arduino environment, +# using the arduino-included avrgcc toolset (mac and pc) +# ENV ?= arduino +# ENV ?= arduinodev +# OS ?= macosx +# OS ?= windows + + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTIONS = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe + +# Build environments +# Start of some ugly makefile-isms to allow optiboot to be built +# in several different environments. See the README.TXT file for +# details. + +# default +fixpath = $(1) + +ifeq ($(ENV), arduino) +# For Arduino, we assume that we're connected to the optiboot directory +# included with the arduino distribution, which means that the full set +# of avr-tools are "right up there" in standard places. +TOOLROOT = ../../../tools +GCCROOT = $(TOOLROOT)/avr/bin/ +AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf + +ifeq ($(OS), windows) +# On windows, SOME of the tool paths will need to have backslashes instead +# of forward slashes (because they use windows cmd.exe for execution instead +# of a unix/mingw shell?) We also have to ensure that a consistent shell +# is used even if a unix shell is installed (ie as part of WINAVR) +fixpath = $(subst /,\,$1) +SHELL = cmd.exe +endif + +else ifeq ($(ENV), arduinodev) +# Arduino IDE source code environment. Use the unpacked compilers created +# by the build (you'll need to do "ant build" first.) +ifeq ($(OS), macosx) +TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools +endif +ifeq ($(OS), windows) +TOOLROOT = ../../../../build/windows/work/hardware/tools +endif + +GCCROOT = $(TOOLROOT)/avr/bin/ +AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf + +else +GCCROOT = +AVRDUDE_CONF = +endif +# +# End of build environment code. + + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x2f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. + +ISPFUSES = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ + -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ + -e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \ + -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m +ISPFLASH = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ + -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ + -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m + +STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" +STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ +-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt +STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt + +OBJ = $(PROGRAM).o +OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls + +DEFS = +LIBS = + +CC = $(GCCROOT)avr-gcc + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib + +OBJCOPY = $(GCCROOT)avr-objcopy +OBJDUMP = $(call fixpath,$(GCCROOT)avr-objdump) + +SIZE = $(GCCROOT)avr-size + +# Test platforms +# Virtual boot block test +virboot328: TARGET = atmega328 +virboot328: MCU_TARGET = atmega328p +virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT' +virboot328: AVR_FREQ = 16000000L +virboot328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe +virboot328: $(PROGRAM)_atmega328.hex +virboot328: $(PROGRAM)_atmega328.lst + +# 20MHz clocked platforms +# +# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) +# + +pro20: TARGET = pro_20mhz +pro20: MCU_TARGET = atmega168 +pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +pro20: AVR_FREQ = 20000000L +pro20: $(PROGRAM)_pro_20mhz.hex +pro20: $(PROGRAM)_pro_20mhz.lst + +pro20_isp: pro20 +pro20_isp: TARGET = pro_20mhz +# 2.7V brownout +pro20_isp: HFUSE = DD +# Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro20_isp: LFUSE = C6 +# 512 byte boot +pro20_isp: EFUSE = 04 +pro20_isp: isp + +# 16MHz clocked platforms +# +# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) +# + +pro16: TARGET = pro_16MHz +pro16: MCU_TARGET = atmega168 +pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +pro16: AVR_FREQ = 16000000L +pro16: $(PROGRAM)_pro_16MHz.hex +pro16: $(PROGRAM)_pro_16MHz.lst + +pro16_isp: pro16 +pro16_isp: TARGET = pro_16MHz +# 2.7V brownout +pro16_isp: HFUSE = DD +# Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro16_isp: LFUSE = C6 +# 512 byte boot +pro16_isp: EFUSE = 04 +pro16_isp: isp + +# Diecimila, Duemilanove with m168, and NG use identical bootloaders +# Call it "atmega168" for generality and clarity, keep "diecimila" for +# backward compatibility of makefile +# +atmega168: TARGET = atmega168 +atmega168: MCU_TARGET = atmega168 +atmega168: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega168: AVR_FREQ = 16000000L +atmega168: $(PROGRAM)_atmega168.hex +atmega168: $(PROGRAM)_atmega168.lst + +atmega168_isp: atmega168 +atmega168_isp: TARGET = atmega168 +# 2.7V brownout +atmega168_isp: HFUSE = DD +# Low power xtal (16MHz) 16KCK/14CK+65ms +atmega168_isp: LFUSE = FF +# 512 byte boot +atmega168_isp: EFUSE = 04 +atmega168_isp: isp + +diecimila: TARGET = diecimila +diecimila: MCU_TARGET = atmega168 +diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +diecimila: AVR_FREQ = 16000000L +diecimila: $(PROGRAM)_diecimila.hex +diecimila: $(PROGRAM)_diecimila.lst + +diecimila_isp: diecimila +diecimila_isp: TARGET = diecimila +# 2.7V brownout +diecimila_isp: HFUSE = DD +# Low power xtal (16MHz) 16KCK/14CK+65ms +diecimila_isp: LFUSE = FF +# 512 byte boot +diecimila_isp: EFUSE = 04 +diecimila_isp: isp + +atmega328: TARGET = atmega328 +atmega328: MCU_TARGET = atmega328p +atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega328: AVR_FREQ = 16000000L +atmega328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe +atmega328: $(PROGRAM)_atmega328.hex +atmega328: $(PROGRAM)_atmega328.lst + +atmega328_isp: atmega328 +atmega328_isp: TARGET = atmega328 +atmega328_isp: MCU_TARGET = atmega328p +# 512 byte boot, SPIEN +atmega328_isp: HFUSE = DE +# Low power xtal (16MHz) 16KCK/14CK+65ms +atmega328_isp: LFUSE = FF +# 2.7V brownout +atmega328_isp: EFUSE = 05 +atmega328_isp: isp + +# Sanguino has a minimum boot size of 1024 bytes, so enable extra functions +# +sanguino: TARGET = atmega644p +sanguino: MCU_TARGET = atmega644p +sanguino: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' +sanguino: AVR_FREQ = 16000000L +sanguino: LDSECTIONS = -Wl,--section-start=.text=0xfc00 +sanguino: $(PROGRAM)_atmega644p.hex +sanguino: $(PROGRAM)_atmega644p.lst + +sanguino_isp: sanguino +sanguino_isp: TARGET = atmega644p +sanguino_isp: MCU_TARGET = atmega644p +# 1024 byte boot +sanguino_isp: HFUSE = DE +# Low power xtal (16MHz) 16KCK/14CK+65ms +sanguino_isp: LFUSE = FF +# 2.7V brownout +sanguino_isp: EFUSE = 05 +sanguino_isp: isp + +# Mega has a minimum boot size of 1024 bytes, so enable extra functions +#mega: TARGET = atmega1280 +mega: MCU_TARGET = atmega1280 +mega: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' +mega: AVR_FREQ = 16000000L +mega: LDSECTIONS = -Wl,--section-start=.text=0x1fc00 +mega: $(PROGRAM)_atmega1280.hex +mega: $(PROGRAM)_atmega1280.lst + +mega_isp: mega +mega_isp: TARGET = atmega1280 +mega_isp: MCU_TARGET = atmega1280 +# 1024 byte boot +mega_isp: HFUSE = DE +# Low power xtal (16MHz) 16KCK/14CK+65ms +mega_isp: LFUSE = FF +# 2.7V brownout +mega_isp: EFUSE = 05 +mega_isp: isp + +# ATmega8 +# +atmega8: TARGET = atmega8 +atmega8: MCU_TARGET = atmega8 +atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega8: AVR_FREQ = 16000000L +atmega8: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe +atmega8: $(PROGRAM)_atmega8.hex +atmega8: $(PROGRAM)_atmega8.lst + +atmega8_isp: atmega8 +atmega8_isp: TARGET = atmega8 +atmega8_isp: MCU_TARGET = atmega8 +# SPIEN, CKOPT, Bootsize=512B +atmega8_isp: HFUSE = CC +# 2.7V brownout, Low power xtal (16MHz) 16KCK/14CK+65ms +atmega8_isp: LFUSE = BF +atmega8_isp: isp + +# ATmega88 +# +atmega88: TARGET = atmega88 +atmega88: MCU_TARGET = atmega88 +atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega88: AVR_FREQ = 16000000L +atmega88: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe +atmega88: $(PROGRAM)_atmega88.hex +atmega88: $(PROGRAM)_atmega88.lst + +atmega88_isp: atmega88 +atmega88_isp: TARGET = atmega88 +atmega88_isp: MCU_TARGET = atmega88 +# 2.7V brownout +atmega88_isp: HFUSE = DD +# Low power xtal (16MHz) 16KCK/14CK+65ms +atemga88_isp: LFUSE = FF +# 512 byte boot +atmega88_isp: EFUSE = 04 +atmega88_isp: isp + + +# 8MHz clocked platforms +# +# These are capable of 115200 baud +# + +lilypad: TARGET = lilypad +lilypad: MCU_TARGET = atmega168 +lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +lilypad: AVR_FREQ = 8000000L +lilypad: $(PROGRAM)_lilypad.hex +lilypad: $(PROGRAM)_lilypad.lst + +lilypad_isp: lilypad +lilypad_isp: TARGET = lilypad +# 2.7V brownout +lilypad_isp: HFUSE = DD +# Internal 8MHz osc (8MHz) Slow rising power +lilypad_isp: LFUSE = E2 +# 512 byte boot +lilypad_isp: EFUSE = 04 +lilypad_isp: isp + +lilypad_resonator: TARGET = lilypad_resonator +lilypad_resonator: MCU_TARGET = atmega168 +lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +lilypad_resonator: AVR_FREQ = 8000000L +lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex +lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst + +lilypad_resonator_isp: lilypad_resonator +lilypad_resonator_isp: TARGET = lilypad_resonator +# 2.7V brownout +lilypad_resonator_isp: HFUSE = DD +# Full swing xtal (20MHz) 258CK/14CK+4.1ms +lilypad_resonator_isp: LFUSE = C6 +# 512 byte boot +lilypad_resonator_isp: EFUSE = 04 +lilypad_resonator_isp: isp + +pro8: TARGET = pro_8MHz +pro8: MCU_TARGET = atmega168 +pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +pro8: AVR_FREQ = 8000000L +pro8: $(PROGRAM)_pro_8MHz.hex +pro8: $(PROGRAM)_pro_8MHz.lst + +pro8_isp: pro8 +pro8_isp: TARGET = pro_8MHz +# 2.7V brownout +pro8_isp: HFUSE = DD +# Full swing xtal (20MHz) 258CK/14CK+4.1ms +pro8_isp: LFUSE = C6 +# 512 byte boot +pro8_isp: EFUSE = 04 +pro8_isp: isp + +atmega328_pro8: TARGET = atmega328_pro_8MHz +atmega328_pro8: MCU_TARGET = atmega328p +atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' +atmega328_pro8: AVR_FREQ = 8000000L +atmega328_pro8: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst + +atmega328_pro8_isp: atmega328_pro8 +atmega328_pro8_isp: TARGET = atmega328_pro_8MHz +atmega328_pro8_isp: MCU_TARGET = atmega328p +# 512 byte boot, SPIEN +atmega328_pro8_isp: HFUSE = DE +# Low power xtal (16MHz) 16KCK/14CK+65ms +atmega328_pro8_isp: LFUSE = FF +# 2.7V brownout +atmega328_pro8_isp: EFUSE = 05 +atmega328_pro8_isp: isp + +# 1MHz clocked platforms +# +# These are capable of 9600 baud +# + +luminet: TARGET = luminet +luminet: MCU_TARGET = attiny84 +luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600' +luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION' +luminet: AVR_FREQ = 1000000L +luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe +luminet: $(PROGRAM)_luminet.hex +luminet: $(PROGRAM)_luminet.lst + +luminet_isp: luminet +luminet_isp: TARGET = luminet +luminet_isp: MCU_TARGET = attiny84 +# Brownout disabled +luminet_isp: HFUSE = DF +# 1MHz internal oscillator, slowly rising power +luminet_isp: LFUSE = 62 +# Self-programming enable +luminet_isp: EFUSE = FE +luminet_isp: isp + +# +# Generic build instructions +# +# + +isp: $(TARGET) + $(ISPFUSES) + $(ISPFLASH) + +isp-stk500: $(PROGRAM)_$(TARGET).hex + $(STK500-1) + $(STK500-2) + +%.elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + $(SIZE) $@ + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@ |