aboutsummaryrefslogtreecommitdiff
path: root/bootloaders/nuevo_diskloader
diff options
context:
space:
mode:
Diffstat (limited to 'bootloaders/nuevo_diskloader')
-rw-r--r--bootloaders/nuevo_diskloader/DiskLoader.elf.hex172
-rw-r--r--bootloaders/nuevo_diskloader/DiskLoader.hex172
-rw-r--r--bootloaders/nuevo_diskloader/Makefile109
-rw-r--r--bootloaders/nuevo_diskloader/src/CDC.cpp173
-rw-r--r--bootloaders/nuevo_diskloader/src/DiskLoader.cpp280
-rw-r--r--bootloaders/nuevo_diskloader/src/Platform.h72
-rw-r--r--bootloaders/nuevo_diskloader/src/USBAPI.h83
-rw-r--r--bootloaders/nuevo_diskloader/src/USBCore.cpp669
-rw-r--r--bootloaders/nuevo_diskloader/src/USBCore.h303
-rw-r--r--bootloaders/nuevo_diskloader/src/USBDesc.h65
10 files changed, 0 insertions, 2098 deletions
diff --git a/bootloaders/nuevo_diskloader/DiskLoader.elf.hex b/bootloaders/nuevo_diskloader/DiskLoader.elf.hex
deleted file mode 100644
index df5f1da..0000000
--- a/bootloaders/nuevo_diskloader/DiskLoader.elf.hex
+++ /dev/null
@@ -1,172 +0,0 @@
-:10700000BDC00000E0C00000DEC00000DCC0000029
-:10701000DAC00000D8C00000D6C00000D4C0000014
-:10702000D2C00000D0C000008AC30000FCC3000032
-:10703000CAC00000C8C00000C6C00000C4C0000034
-:10704000C2C00000C0C00000BEC00000BCC0000044
-:10705000BAC00000B8C00000B6C00000B4C0000054
-:10706000B2C00000B0C00000AEC00000ACC0000064
-:10707000AAC00000A8C00000A6C00000A4C0000074
-:10708000A2C00000A0C000009EC000009CC0000084
-:107090009AC0000098C0000096C0000094C0000094
-:1070A00092C0000090C000008EC0000011241FBEDE
-:1070B000CFEFDAE0DEBFCDBFF7C0080B000202025F
-:1070C0000100090400000102020000052400100173
-:1070D0000524010101042402060524060001070518
-:1070E000810310004009040100020A0000000705A6
-:1070F00002024000000705830240000041014214E3
-:107100004505560455026403740300001E9587026A
-:107110000110030004030904220300000000000022
-:10712000000000000000000000000000000000005F
-:107130000000000000000000000018034100720081
-:107140006400750069006E006F0020004C004C0068
-:1071500043001201000200000040412389000001A9
-:1071600001020001120100020200004041238900D7
-:1071700000010102000100C18081033C11241FBEF7
-:10718000CFEFDAE0DEBFCDBF11E0A0E0B1E0E2E892
-:10719000FAE702C005900D92A830B107D9F711E0C7
-:1071A000A8E0B1E001C01D92A539B107E1F711E7F0
-:1071B000CCE7D1E703C02297FE015DD4CA37D107DF
-:1071C000D1F772D05CC41CCFFC0180818E5F8083BC
-:1071D00080E86AEB70E742E450E063C2FC01818121
-:1071E0009081913A49F48132C1F480E060E071E02D
-:1071F00047E050E056D20FC0913279F4803231F43A
-:1072000080E091E067E070E088D205C0823229F426
-:1072100082818093070181E0089580E00895FF92C4
-:107220000F931F93CF93DF93982F8B01FF2480E759
-:107230006030780738F4FF24F39483E0FB018093F7
-:107240005700E895C42FD0E0892F68E071E0AE01C7
-:107250001AD1FF2019F107B600FCFDCFD595C795CF
-:107260004C2FF801A8E0B1E020E031E009C08D9199
-:107270009D910C0130935700E895112432962F5FB1
-:107280002417A8F385E0F80180935700E89507B626
-:1072900000FCFDCF81E180935700E895DF91CF910D
-:1072A0001F910F91FF90089588E10FB6F894809395
-:1072B0006000109260000FBE3F9A209A6E9A90E88C
-:1072C000909361001092610081E885BF95BF01E055
-:1072D00005BF02E005BF769A289A479884E991E0B5
-:1072E0007CD2789484E18093880180E18093890145
-:1072F000CC24DD2430E9A32E31E0B32E99249394DD
-:1073000002C0CC24DD2482E0B5D08823E1F382E002
-:107310000FD1E82E8CEF90E7FC0124913196029674
-:1073200044912E1511F02223B9F710928B0110927F
-:107330008A0150E082E068E071E0A5D0F1E4EF1648
-:1073400079F4609108016058633028F0683111F0D9
-:1073500064E001C063E0C62FD0E0C15FDE4810C02A
-:1073600026E5E21681F480910801803319F0FF24AC
-:10737000F39428C080910A01C82FD0E0C45FDE4892
-:10738000FF24F39427C085E7E81629F423E0F22EC2
-:10739000CCE0D1E71FC0E5E5EE1639F4C090080156
-:1073A000D0900901CC0CDD1C0CC0F4E6EF1631F4D2
-:1073B00082E0B6014091090132DF03C024E7E21602
-:1073C00021F0FF24C3E1D1E705C0F0900901E601F7
-:1073D000CF0CD11C08E813E1015010400930110511
-:1073E00009F433C082E046D0882309F02EC0F4CFE0
-:1073F000809709F086CF83E068E871E041E050E0D3
-:10740000BFD0FF2029F04F2D50E083E8BE01B8D057
-:1074100083E469E871E041E050E0B2D081E5E8162C
-:1074200009F071CF88EE93E0F5013197F1F70197FC
-:10743000D9F701E005BF00E005BF9092E00010928F
-:10744000E200EE27FF2709945ECF82E071D0EFEFD4
-:107450008F3F9E0709F0CCCFCECFFC0104C08091B6
-:10746000F100819361506623D1F7289884E68093D8
-:107470008D0108959FB7F89487708093E9008091FB
-:10748000F2009FBF0895FB019FB7F8948770809327
-:10749000E90034E62BE610C08091E80085FFFCCFC0
-:1074A000289830938D018091F10081938091E800BC
-:1074B00085FD02C02093E800415050408FEF4F3FC0
-:1074C000580751F79FBF0895282F80918E01882378
-:1074D000C1F057FF1AC015C0289890938D01809174
-:1074E000F1008193E217F307B9F74115510539F01F
-:1074F0008091F200882319F48BE68093E800AFBFF7
-:1075000002C04FEF5FEFCA010895AFB7F89427703C
-:107510002093E9008091F200282F30E024173507EE
-:107520000CF4A901FB019B01240F311D94E6DACF75
-:10753000DF93CF930F92CDB7DEB7BE016F5F7F4F62
-:1075400041E050E0C1DF019719F08FEF9FEF02C0DB
-:10755000898190E00F90CF91DF9108952FB7F89433
-:1075600087708093E9008091E80085FD02C090E07B
-:1075700004C08091F20090E4981B2FBF892F0895DA
-:107580005F926F927F928F929F92AF92BF92CF92B3
-:10759000DF92EF92FF920F931F93CF93DF93F82E1A
-:1075A0006A0180918E01882319F44FEF5FEF68C064
-:1075B0008B01EA0157E0E52EEF208F2D90E040E2AD
-:1075C000842E912C882299223AE3532E20E4A22E75
-:1075D000B12CA822B92280EA682E8FE0782E43C011
-:1075E0008F2DBCDF282F882321F4C3010197F1F7E9
-:1075F0003AC090E0C817D9070CF42C2FC21BD10950
-:107600004FB7F894E092E9008114910421F406C088
-:107610001092F10021502223D9F719C0F7FC03C0C2
-:10762000F801922F10C0C801322F06C0FC0101964C
-:10763000E491E093F10031503323C1F706C081910A
-:107640008093F10091509923D1F7020F111D809181
-:10765000E80085FF05C0209729F4A114B10411F0BA
-:107660005092E8004FBF209709F0BACFF6FE03C052
-:107670008AE38093E800769884E680938C01A601E3
-:10768000CA01DF91CF911F910F91FF90EF90DF9092
-:10769000CF90BF90AF909F908F907F906F905F90B2
-:1076A00008950F931F93182FFB01A0919101B091A2
-:1076B0009201BA010EEF2AC017FF02C0949101C0D7
-:1076C000908120918F01309190012A173B07ACF4F3
-:1076D0008091E8008570E1F38091E80082FF03C0AB
-:1076E0004FEF5FEF16C09093F100C90101968F73C1
-:1076F0009070892B11F40093E8002F5F3F4F309377
-:10770000900120938F016150704031966115710591
-:1077100099F6CA011F910F910895CF93DF939C01B1
-:10772000EB018091E80082FFFCCFC9016C2F95DE50
-:107730008BEF8093E800CE01DF91CF9108951F92E7
-:107740000F920FB60F9211242F933F938F93809136
-:10775000E1001092E100282F83FF0FC01092E90092
-:1077600081E08093EB001092EC0082E38093ED00C7
-:1077700010928E0188E08093F00022FF26C083E003
-:107780008093E9008091F200882319F08AE38093C6
-:10779000E80080918C01882351F080918C01815008
-:1077A00080938C0180918C01882309F4769A8091D2
-:1077B0008D01882351F080918D01815080938D013E
-:1077C00080918D01882309F4289A8F913F912F9100
-:1077D0000F900FBE0F901F90189510928E0181E0B0
-:1077E0008093D70080EA8093D80082E189BD09B4F4
-:1077F00000FEFDCF80E98093D8008CE08093E2000A
-:107800001092E00008950895DF93CF930F92CDB7C3
-:10781000DEB71982CE010196D7DC898190E00F9006
-:10782000CF91DF9108951F920F920FB60F921124FE
-:10783000EF92FF921F932F933F934F935F936F931A
-:107840007F938F939F93AF93BF93EF93FF93DF93B8
-:10785000CF93CDB7DEB76197DEBFCDBF1092E90001
-:107860008091E80083FFECC0CE01019668E0F5DD71
-:1078700082EF8093E800998197FF05C08091E8002E
-:1078800080FFFCCF03C08EEF8093E800292F30E00B
-:10789000C90180769070892B09F0B3C08A81882352
-:1078A00029F41092F1001092F100BFC0813009F468
-:1078B000BCC0833009F4B9C0853049F48091E80038
-:1078C00080FFFCCF8B8180688093E300AEC0863060
-:1078D00009F06DC01C81EF80F8841230A9F5109278
-:1078E000E9001092900110928F0110929201109273
-:1078F00091018ADF99E0FE013996DF01292F1D925F
-:107900002A95E9F799871A8791E09E8790E8988BE6
-:107910009AEF998B20918F0130919001275F3F4F13
-:107920003C872B878D871092E9001092900110926E
-:107930008F01F0929201E092910180E0BF0149E055
-:1079400050E0AFDE61DF71C01092E900109290014B
-:1079500010928F01F0929201E0929101113071F436
-:1079600088E0E816F10411F41093930180919301DB
-:10797000882309F062C0E2E5F1E713C0133009F093
-:1079800058C08B81882319F4E4E1F1E70AC0823002
-:1079900019F4E8E1F1E705C0813009F04AC0EAE3F3
-:1079A000F1E7449150E080E8BF017BDE3EC08730C4
-:1079B00009F43FC0883021F481E08093F10035C0A4
-:1079C000893099F523703070232B99F5E7E7F1E7BB
-:1079D00091E031E026E39093E9003093EB0084914D
-:1079E0008093EC002093ED009F5F3196943099F7DF
-:1079F0008EE78093EA001092EA008B8180938E01DB
-:107A000014C08F8198851092E90010929001109215
-:107A10008F0190939201809391018D81882349F485
-:107A2000CE010196DBDB882321F08EEF8093E80006
-:107A300007C081E28093EB0003C0E4E6F1E7B1CF39
-:107A40006196DEBFCDBFCF91DF91FF91EF91BF91E6
-:107A5000AF919F918F917F916F915F914F913F91E6
-:107A60002F911F91FF90EF900F900FBE0F901F90DE
-:107A70001895EE0FFF1F0590F491E02D0994F894EE
-:027A8000FFCF36
-:087A820000E10000000000001B
-:040000030000700089
-:00000001FF
diff --git a/bootloaders/nuevo_diskloader/DiskLoader.hex b/bootloaders/nuevo_diskloader/DiskLoader.hex
deleted file mode 100644
index df5f1da..0000000
--- a/bootloaders/nuevo_diskloader/DiskLoader.hex
+++ /dev/null
@@ -1,172 +0,0 @@
-:10700000BDC00000E0C00000DEC00000DCC0000029
-:10701000DAC00000D8C00000D6C00000D4C0000014
-:10702000D2C00000D0C000008AC30000FCC3000032
-:10703000CAC00000C8C00000C6C00000C4C0000034
-:10704000C2C00000C0C00000BEC00000BCC0000044
-:10705000BAC00000B8C00000B6C00000B4C0000054
-:10706000B2C00000B0C00000AEC00000ACC0000064
-:10707000AAC00000A8C00000A6C00000A4C0000074
-:10708000A2C00000A0C000009EC000009CC0000084
-:107090009AC0000098C0000096C0000094C0000094
-:1070A00092C0000090C000008EC0000011241FBEDE
-:1070B000CFEFDAE0DEBFCDBFF7C0080B000202025F
-:1070C0000100090400000102020000052400100173
-:1070D0000524010101042402060524060001070518
-:1070E000810310004009040100020A0000000705A6
-:1070F00002024000000705830240000041014214E3
-:107100004505560455026403740300001E9587026A
-:107110000110030004030904220300000000000022
-:10712000000000000000000000000000000000005F
-:107130000000000000000000000018034100720081
-:107140006400750069006E006F0020004C004C0068
-:1071500043001201000200000040412389000001A9
-:1071600001020001120100020200004041238900D7
-:1071700000010102000100C18081033C11241FBEF7
-:10718000CFEFDAE0DEBFCDBF11E0A0E0B1E0E2E892
-:10719000FAE702C005900D92A830B107D9F711E0C7
-:1071A000A8E0B1E001C01D92A539B107E1F711E7F0
-:1071B000CCE7D1E703C02297FE015DD4CA37D107DF
-:1071C000D1F772D05CC41CCFFC0180818E5F8083BC
-:1071D00080E86AEB70E742E450E063C2FC01818121
-:1071E0009081913A49F48132C1F480E060E071E02D
-:1071F00047E050E056D20FC0913279F4803231F43A
-:1072000080E091E067E070E088D205C0823229F426
-:1072100082818093070181E0089580E00895FF92C4
-:107220000F931F93CF93DF93982F8B01FF2480E759
-:107230006030780738F4FF24F39483E0FB018093F7
-:107240005700E895C42FD0E0892F68E071E0AE01C7
-:107250001AD1FF2019F107B600FCFDCFD595C795CF
-:107260004C2FF801A8E0B1E020E031E009C08D9199
-:107270009D910C0130935700E895112432962F5FB1
-:107280002417A8F385E0F80180935700E89507B626
-:1072900000FCFDCF81E180935700E895DF91CF910D
-:1072A0001F910F91FF90089588E10FB6F894809395
-:1072B0006000109260000FBE3F9A209A6E9A90E88C
-:1072C000909361001092610081E885BF95BF01E055
-:1072D00005BF02E005BF769A289A479884E991E0B5
-:1072E0007CD2789484E18093880180E18093890145
-:1072F000CC24DD2430E9A32E31E0B32E99249394DD
-:1073000002C0CC24DD2482E0B5D08823E1F382E002
-:107310000FD1E82E8CEF90E7FC0124913196029674
-:1073200044912E1511F02223B9F710928B0110927F
-:107330008A0150E082E068E071E0A5D0F1E4EF1648
-:1073400079F4609108016058633028F0683111F0D9
-:1073500064E001C063E0C62FD0E0C15FDE4810C02A
-:1073600026E5E21681F480910801803319F0FF24AC
-:10737000F39428C080910A01C82FD0E0C45FDE4892
-:10738000FF24F39427C085E7E81629F423E0F22EC2
-:10739000CCE0D1E71FC0E5E5EE1639F4C090080156
-:1073A000D0900901CC0CDD1C0CC0F4E6EF1631F4D2
-:1073B00082E0B6014091090132DF03C024E7E21602
-:1073C00021F0FF24C3E1D1E705C0F0900901E601F7
-:1073D000CF0CD11C08E813E1015010400930110511
-:1073E00009F433C082E046D0882309F02EC0F4CFE0
-:1073F000809709F086CF83E068E871E041E050E0D3
-:10740000BFD0FF2029F04F2D50E083E8BE01B8D057
-:1074100083E469E871E041E050E0B2D081E5E8162C
-:1074200009F071CF88EE93E0F5013197F1F70197FC
-:10743000D9F701E005BF00E005BF9092E00010928F
-:10744000E200EE27FF2709945ECF82E071D0EFEFD4
-:107450008F3F9E0709F0CCCFCECFFC0104C08091B6
-:10746000F100819361506623D1F7289884E68093D8
-:107470008D0108959FB7F89487708093E9008091FB
-:10748000F2009FBF0895FB019FB7F8948770809327
-:10749000E90034E62BE610C08091E80085FFFCCFC0
-:1074A000289830938D018091F10081938091E800BC
-:1074B00085FD02C02093E800415050408FEF4F3FC0
-:1074C000580751F79FBF0895282F80918E01882378
-:1074D000C1F057FF1AC015C0289890938D01809174
-:1074E000F1008193E217F307B9F74115510539F01F
-:1074F0008091F200882319F48BE68093E800AFBFF7
-:1075000002C04FEF5FEFCA010895AFB7F89427703C
-:107510002093E9008091F200282F30E024173507EE
-:107520000CF4A901FB019B01240F311D94E6DACF75
-:10753000DF93CF930F92CDB7DEB7BE016F5F7F4F62
-:1075400041E050E0C1DF019719F08FEF9FEF02C0DB
-:10755000898190E00F90CF91DF9108952FB7F89433
-:1075600087708093E9008091E80085FD02C090E07B
-:1075700004C08091F20090E4981B2FBF892F0895DA
-:107580005F926F927F928F929F92AF92BF92CF92B3
-:10759000DF92EF92FF920F931F93CF93DF93F82E1A
-:1075A0006A0180918E01882319F44FEF5FEF68C064
-:1075B0008B01EA0157E0E52EEF208F2D90E040E2AD
-:1075C000842E912C882299223AE3532E20E4A22E75
-:1075D000B12CA822B92280EA682E8FE0782E43C011
-:1075E0008F2DBCDF282F882321F4C3010197F1F7E9
-:1075F0003AC090E0C817D9070CF42C2FC21BD10950
-:107600004FB7F894E092E9008114910421F406C088
-:107610001092F10021502223D9F719C0F7FC03C0C2
-:10762000F801922F10C0C801322F06C0FC0101964C
-:10763000E491E093F10031503323C1F706C081910A
-:107640008093F10091509923D1F7020F111D809181
-:10765000E80085FF05C0209729F4A114B10411F0BA
-:107660005092E8004FBF209709F0BACFF6FE03C052
-:107670008AE38093E800769884E680938C01A601E3
-:10768000CA01DF91CF911F910F91FF90EF90DF9092
-:10769000CF90BF90AF909F908F907F906F905F90B2
-:1076A00008950F931F93182FFB01A0919101B091A2
-:1076B0009201BA010EEF2AC017FF02C0949101C0D7
-:1076C000908120918F01309190012A173B07ACF4F3
-:1076D0008091E8008570E1F38091E80082FF03C0AB
-:1076E0004FEF5FEF16C09093F100C90101968F73C1
-:1076F0009070892B11F40093E8002F5F3F4F309377
-:10770000900120938F016150704031966115710591
-:1077100099F6CA011F910F910895CF93DF939C01B1
-:10772000EB018091E80082FFFCCFC9016C2F95DE50
-:107730008BEF8093E800CE01DF91CF9108951F92E7
-:107740000F920FB60F9211242F933F938F93809136
-:10775000E1001092E100282F83FF0FC01092E90092
-:1077600081E08093EB001092EC0082E38093ED00C7
-:1077700010928E0188E08093F00022FF26C083E003
-:107780008093E9008091F200882319F08AE38093C6
-:10779000E80080918C01882351F080918C01815008
-:1077A00080938C0180918C01882309F4769A8091D2
-:1077B0008D01882351F080918D01815080938D013E
-:1077C00080918D01882309F4289A8F913F912F9100
-:1077D0000F900FBE0F901F90189510928E0181E0B0
-:1077E0008093D70080EA8093D80082E189BD09B4F4
-:1077F00000FEFDCF80E98093D8008CE08093E2000A
-:107800001092E00008950895DF93CF930F92CDB7C3
-:10781000DEB71982CE010196D7DC898190E00F9006
-:10782000CF91DF9108951F920F920FB60F921124FE
-:10783000EF92FF921F932F933F934F935F936F931A
-:107840007F938F939F93AF93BF93EF93FF93DF93B8
-:10785000CF93CDB7DEB76197DEBFCDBF1092E90001
-:107860008091E80083FFECC0CE01019668E0F5DD71
-:1078700082EF8093E800998197FF05C08091E8002E
-:1078800080FFFCCF03C08EEF8093E800292F30E00B
-:10789000C90180769070892B09F0B3C08A81882352
-:1078A00029F41092F1001092F100BFC0813009F468
-:1078B000BCC0833009F4B9C0853049F48091E80038
-:1078C00080FFFCCF8B8180688093E300AEC0863060
-:1078D00009F06DC01C81EF80F8841230A9F5109278
-:1078E000E9001092900110928F0110929201109273
-:1078F00091018ADF99E0FE013996DF01292F1D925F
-:107900002A95E9F799871A8791E09E8790E8988BE6
-:107910009AEF998B20918F0130919001275F3F4F13
-:107920003C872B878D871092E9001092900110926E
-:107930008F01F0929201E092910180E0BF0149E055
-:1079400050E0AFDE61DF71C01092E900109290014B
-:1079500010928F01F0929201E0929101113071F436
-:1079600088E0E816F10411F41093930180919301DB
-:10797000882309F062C0E2E5F1E713C0133009F093
-:1079800058C08B81882319F4E4E1F1E70AC0823002
-:1079900019F4E8E1F1E705C0813009F04AC0EAE3F3
-:1079A000F1E7449150E080E8BF017BDE3EC08730C4
-:1079B00009F43FC0883021F481E08093F10035C0A4
-:1079C000893099F523703070232B99F5E7E7F1E7BB
-:1079D00091E031E026E39093E9003093EB0084914D
-:1079E0008093EC002093ED009F5F3196943099F7DF
-:1079F0008EE78093EA001092EA008B8180938E01DB
-:107A000014C08F8198851092E90010929001109215
-:107A10008F0190939201809391018D81882349F485
-:107A2000CE010196DBDB882321F08EEF8093E80006
-:107A300007C081E28093EB0003C0E4E6F1E7B1CF39
-:107A40006196DEBFCDBFCF91DF91FF91EF91BF91E6
-:107A5000AF919F918F917F916F915F914F913F91E6
-:107A60002F911F91FF90EF900F900FBE0F901F90DE
-:107A70001895EE0FFF1F0590F491E02D0994F894EE
-:027A8000FFCF36
-:087A820000E10000000000001B
-:040000030000700089
-:00000001FF
diff --git a/bootloaders/nuevo_diskloader/Makefile b/bootloaders/nuevo_diskloader/Makefile
deleted file mode 100644
index 88e0cfe..0000000
--- a/bootloaders/nuevo_diskloader/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-###############################################################################
-# Makefile for DiskLoader
-###############################################################################
-
-## General Flags
-PROJECT = DiskLoader
-TARGET = DiskLoader.elf
-CC = avr-gcc
-
-# BOARD2
-MCU = atmega32u4
-AVR_FREQ = 16000000L
-
-# Specify the Arduino model using the assigned PID. This is used by Descriptors.c
-# to set PID and product descriptor string
-# Arduino Leonardo PID
-ARDUINO_MODEL_PID = 0x0089
-# Arduino Micro PID
-#ARDUINO_MODEL_PID = 0x0035
-
-# Change if your programmer is different
-AVRDUDE_PROGRAMMER = avrispmkII
-AVRDUDE_PORT = usb
-
-# program name should not be changed...
-PROGRAM = DiskLoader
-
-AVRDUDE = avrdude
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -p $(MCU)
-
-## Options common to compile, link and assembly rules
-COMMON = -mmcu=$(MCU)
-
-override CFLAGS = -g -Wall -Os -mmcu=$(MCU) -DF_CPU=$(AVR_FREQ) -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) $(DEFS) -ffunction-sections -gdwarf-2 -fdata-sections -fno-split-wide-types
-
-## Assembly specific flags
-ASMFLAGS = $(COMMON)
-ASMFLAGS += $(CFLAGS)
-ASMFLAGS += -x assembler-with-cpp -Wa,-gdwarf2
-
-## Linker flags
-LDFLAGS = $(COMMON)
-#LDFLAGS += -Wl,-gc-sections,-Map=DiskLoader.map,--cref
-#LDFLAGS += -Wl,--section-start=.text=0x7000,--relax
-#LDFLAGS += -Wl,--gc-sections
-#LDFLAGS += -nodefaultlibs -nostartfiles
-#LDFLAGS += -nostartfiles
-LDFLAGS += -Wl,-gc-sections,-Map=DiskLoader.map,--section-start=.text=0x7000,--relax
-
-
-## Intel Hex file production flags
-HEX_EEPROM_FLAGS = -j .eeprom
-HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load"
-HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings
-
-## Objects explicitly added by the user
-LINKONLYOBJECTS =
-
-MODULES := .
-SRC_DIR := $(addprefix src/,$(MODULES))
-BUILD_DIR := $(addprefix build/,$(MODULES))
-
-SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.cpp))
-OBJ := $(patsubst src/%.cpp,build/%.o,$(SRC))
-DEP := $(OBJ:%.o=%.d)
-INCLUDES := $(addprefix -I,$(SRC_DIR))
-
-vpath %.cpp $(SRC_DIR)
-
-.PHONY: all checkdirs clean
-
-all: checkdirs $(TARGET) DiskLoader.hex DiskLoader.lss size
-
--include $(DEP)
-
-checkdirs: $(BUILD_DIR)
-
-$(BUILD_DIR):
- @mkdir -p $@
-
-clean:
- @rm -rf build/
- @rm -f *.hex
- @rm -f *.elf
- @rm -f *.lss
- @rm -f *.map
-
-define make-goal
-$1/%.o: %.cpp
- $(CC) $(INCLUDES) $(CFLAGS) -c $$< -MD -o $$@
-endef
-
-$(foreach bdir,$(BUILD_DIR),$(eval $(call make-goal,$(bdir))))
-
-$(TARGET): $(OBJ)
- $(CC) $(LDFLAGS) $(LINKONLYOBJECTS) $(LIBDIRS) $(LIBS) $^ -o $@
-
-%.hex: $(TARGET)
- avr-objcopy -O ihex $(HEX_FLASH_FLAGS) $< $@
-
-%.lss: $(TARGET)
- avr-objdump -h -S $< > $@
-
-size: $(TARGET)
- @echo
-# @avr-size -C --mcu=${MCU} ${TARGET}.elf
-
-program: $(TARGET).hex
- $(AVRDUDE) $(AVRDUDE_FLAGS) -B 1 -u -U flash:w:$(TARGET).hex
diff --git a/bootloaders/nuevo_diskloader/src/CDC.cpp b/bootloaders/nuevo_diskloader/src/CDC.cpp
deleted file mode 100644
index cc798b4..0000000
--- a/bootloaders/nuevo_diskloader/src/CDC.cpp
+++ /dev/null
@@ -1,173 +0,0 @@
-
-
-/* Copyright (c) 2011, Peter Barrett
-**
-** Permission to use, copy, modify, and/or distribute this software for
-** any purpose with or without fee is hereby granted, provided that the
-** above copyright notice and this permission notice appear in all copies.
-**
-** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
-** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
-** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-** SOFTWARE.
-*/
-
-#include "Platform.h"
-#include "USBAPI.h"
-#include <avr/wdt.h>
-
-#if defined(USBCON)
-#ifdef CDC_ENABLED
-
-void Reboot()
-{
- USB.detach();
- cli();
- asm volatile("jmp 0x7800"); // jump to bootloader - DiskLoader takes up last 2 kB
-}
-
-typedef struct
-{
- u32 dwDTERate;
- u8 bCharFormat;
- u8 bParityType;
- u8 bDataBits;
- u8 lineState;
-} LineInfo;
-
-static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 };
-
-#define WEAK __attribute__ ((weak))
-
-extern const CDCDescriptor _cdcInterface PROGMEM;
-const CDCDescriptor _cdcInterface =
-{
- D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1),
-
- // CDC communication interface
- D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0),
- D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd)
- D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not)
- D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported
- D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0
- D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40),
-
- // CDC data interface
- D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0),
- D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0),
- D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0)
-};
-
-int WEAK CDC_GetInterface(u8* interfaceNum)
-{
- interfaceNum[0] += 2; // uses 2
- return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface));
-}
-
-bool WEAK CDC_Setup(Setup& setup)
-{
- u8 r = setup.bRequest;
- u8 requestType = setup.bmRequestType;
-
- if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType)
- {
- if (CDC_GET_LINE_CODING == r)
- {
- USB_SendControl(0,(void*)&_usbLineInfo,7);
- return true;
- }
- }
-
- if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType)
- {
- if (CDC_SET_LINE_CODING == r)
- {
- USB_RecvControl((void*)&_usbLineInfo,7);
- return true;
- }
-
- if (CDC_SET_CONTROL_LINE_STATE == r)
- {
-// if (0 != _usbLineInfo.lineState && 1200 == _usbLineInfo.dwDTERate) // auto-reset is triggered when the port, already open at 1200 bps, is closed
-// Reboot();
- _usbLineInfo.lineState = setup.wValueL;
- return true;
- }
- }
- return false;
-}
-
-/*
-int _serialPeek = -1;
-void Serial_::begin(uint16_t baud_count)
-{
-}
-
-void Serial_::end(void)
-{
-}
-
-int Serial_::available(void)
-{
- u8 avail = USB_Available(CDC_RX);
- if (_serialPeek != -1)
- avail++;
- return avail;
-}
-
-// peek is nasty
-int Serial_::peek(void)
-{
- if (_serialPeek == -1)
- _serialPeek = read();
- return _serialPeek;
-}
-
-int Serial_::read(void)
-{
- int c;
- if (_serialPeek != -1)
- {
- c = _serialPeek;
- _serialPeek = -1;
- } else {
- c = USB_Recv(CDC_RX);
- }
- return c;
-}
-
-
-
-void Serial_::flush(void)
-{
- USB_Flush(CDC_TX);
-}
-
-size_t Serial_::write(uint8_t c)
-{
-
- // TODO - ZE - check behavior on different OSes and test what happens if an
- // open connection isn't broken cleanly (cable is yanked out, host dies
- // or locks up, or host virtual serial port hangs)
- if (_usbLineInfo.lineState > 0) {
- int r = USB_Send(CDC_TX,&c,1);
- if (r > 0) {
- return r;
- } else {
-// setWriteError();
- return 0;
- }
- }
-// setWriteError();
- return 0;
-}
-
-Serial_ Serial;
-*/
-
-#endif
-#endif /* if defined(USBCON) */ \ No newline at end of file
diff --git a/bootloaders/nuevo_diskloader/src/DiskLoader.cpp b/bootloaders/nuevo_diskloader/src/DiskLoader.cpp
deleted file mode 100644
index 216ddc6..0000000
--- a/bootloaders/nuevo_diskloader/src/DiskLoader.cpp
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * DiskLoader.cpp
- */
-
-#include "Platform.h"
-//#include "USBCore.h"
-
-
-extern "C"
-void entrypoint(void) __attribute__ ((naked)) __attribute__ ((section (".vectors")));
-void entrypoint(void)
-{
- asm volatile (
- "eor r1, r1\n" // Zero register
- "out 0x3F, r1\n" // SREG
- "ldi r28, 0xFF\n" // Y-register
- "ldi r29, 0x0A\n" // Y-register
- "out 0x3E, r29\n" // SPH
- "out 0x3D, r28\n" // SPL
- "rjmp main" // Stack is all set up, start the main code
- ::);
-}
-
-u8 _flashbuf[128];
-u8 _inSync;
-u8 _ok;
-u16 do_reset = 0;
-volatile u16 _timeout;
-
-void Program(u8 ep, u16 page, u8 count)
-{
- u8 write = page < 28*1024; // Don't write over bootloader please
- if (write)
- boot_page_erase(page);
-
- USB_Recv_block(ep,_flashbuf,count); // Read while page is erasing
-
- if (!write)
- return;
-
- boot_spm_busy_wait(); // Wait until the memory is erased.
-
- count >>= 1;
- u16* p = (u16*)page;
- u16* b = (u16*)_flashbuf;
- for (u8 i = 0; i < count; i++)
- boot_page_fill(p++, b[i]);
-
- boot_page_write(page);
- boot_spm_busy_wait();
- boot_rww_enable ();
-}
-
-#define HW_VER 0x02
-#define SW_MAJOR 0x01
-#define SW_MINOR 0x10
-
-#define STK_OK 0x10
-#define STK_INSYNC 0x14 // ' '
-#define CRC_EOP 0x20 // 'SPACE'
-#define STK_GET_SYNC 0x30 // '0'
-
-#define STK_GET_PARAMETER 0x41 // 'A'
-#define STK_SET_DEVICE 0x42 // 'B'
-#define STK_SET_DEVICE_EXT 0x45 // 'E'
-#define STK_LOAD_ADDRESS 0x55 // 'U'
-#define STK_UNIVERSAL 0x56 // 'V'
-#define STK_PROG_PAGE 0x64 // 'd'
-#define STK_READ_PAGE 0x74 // 't'
-#define STK_READ_SIGN 0x75 // 'u'
-
-extern const u8 _readSize[] PROGMEM;
-const u8 _readSize[] =
-{
- STK_GET_PARAMETER, 1,
- STK_SET_DEVICE, 20,
- STK_SET_DEVICE_EXT, 5,
- STK_UNIVERSAL, 4,
- STK_LOAD_ADDRESS, 2,
- STK_PROG_PAGE, 3,
- STK_READ_PAGE, 3,
- 0,0
-};
-
-extern const u8 _consts[] PROGMEM;
-const u8 _consts[] =
-{
- SIGNATURE_0,
- SIGNATURE_1,
- SIGNATURE_2,
- HW_VER, // Hardware version
- SW_MAJOR, // Software major version
- SW_MINOR, // Software minor version
- 0x03, // Unknown but seems to be required by avr studio 3.56
- 0x00, //
-};
-
-//int getch(void)
-//{
-// u16 timeout;
-// u8 c;
-// for (timeout = 0; timeout; timeout--)
-// {
-// c = USB_Recv(CDC_RX);
-// if (c != -1)
-// return c;
-// }
-// return -1;
-//}
-
-
-void start_sketch()
-{
- UDCON = 1; // Detatch USB
- UDIEN = 0;
- asm volatile ( // Reset vector to run firmware
- "clr r30\n"
- "clr r31\n"
- "ijmp\n"
- ::);
-}
-
-int main(void) __attribute__ ((naked));
-int main()
-{
- wdt_disable();
- BOARD_INIT();
- /* move interrupts to boot section:
- * uses inline assembly because the procedure must be completed in four cycles.
- * seems to fail if called before disabling WDT and calling BOARD_INIT()
- */
- asm volatile (
- "ldi r16, 0x01\n" // (1<<IVCE) /* Enable change of interrupt vectors */
- "out 0x35, r16\n" // MCUCR
- "ldi r16, 0x02\n" // (1<<IVSEL) /* Move interrupts to boot flash section */
- "out 0x35, r16\n" // MCUCR
- );
- TX_LED_OFF();
- RX_LED_OFF();
- L_LED_OFF();
- USB.attach();
- sei();
-
- _inSync = STK_INSYNC;
- _ok = STK_OK;
-
- for (;;)
- {
- u8* packet = _flashbuf;
- u16 address = 0;
- for (;;)
- {
-// while (!USB_Available(CDC_RX))
-// ;
- if (USB_Available(CDC_RX))
- {
- u8 cmd = USB_Recv(CDC_RX);
-
- // Read packet contents
- u8 len;
- const u8* rs = _readSize;
- for (;;)
- {
- u8 c = pgm_read_byte(rs++);
- len = pgm_read_byte(rs++);
- if (c == cmd || c == 0)
- break;
- }
- _timeout = 0;
- // Read params
- USB_Recv_block(CDC_RX, packet, len);
-
- // Send a response
- u8 send = 0;
- const u8* pgm = _consts+7;
- if (STK_GET_PARAMETER == cmd)
- {
- u8 i = packet[0] - 0x80;
- if (i > 2)
- i = (i==0x18) ? 3 : 4; // 0x80:HW_VER,0x81:SW_MAJOR,0x82:SW_MINOR,0x18:3 or 0
- pgm = _consts + i + 3;
- send = 1;
- }
- else if (STK_UNIVERSAL == cmd)
- {
- if (packet[0] == 0x30)
- pgm = _consts + packet[2];
- send = 1;
- }
- else if (STK_READ_SIGN == cmd)
- {
- pgm = _consts;
- send = 3;
- }
- else if (STK_LOAD_ADDRESS == cmd)
- {
- address = *((u16*)packet); // word address
- address += address;
- }
- else if (STK_PROG_PAGE == cmd)
- {
- Program(CDC_RX, address, packet[1]);
- }
- else if (STK_READ_PAGE == cmd)
- {
- send = packet[1];
- pgm = (const u8*)address;
- address += send;
- }
-
- // Check sync
- // if (Serial.available() > 0 && Serial.read() != ' ')
- // break;
- // if (USB_Available(CDC_RX) && USB_Recv(CDC_RX) != ' ')
-
- // u8 countdown = 10;
- // while (!USB_Available(CDC_RX))
- // {
- // if (countdown-- == 0)
- // break;
- // }
- // u8 x = USB_Recv(CDC_RX);
- // if (x != -1 && x != ' ')
- // {
- // L_LED_ON();
- // break;
- // }
-
- // if (getch() != ' ')
- // break;
-
- // while (!USB_Available(CDC_RX))
- // ;
- //
- // int x = USB_Recv(CDC_RX);
- // if (x == -1)
- // {
- // UEINTX = 0x6B;
- // break;
- // }
- // else if (x != ' ')
- // {
- //// UEINTX = 0x6B;
- // break;
- // }
-
- u16 countdown = 5000;
- while (countdown-- > 10 && !USB_Available(CDC_RX))
- ;
- int x = USB_Recv(CDC_RX);
- if (x != -1 && x != ' ')
- break;
-
- USB_Send(CDC_TX, &_inSync, 1);
-
- if (send)
- USB_Send(CDC_TX|TRANSFER_PGM, pgm, send);
-
- // Send ok
- USB_Send(CDC_TX|TRANSFER_RELEASE, &_ok, 1);
-
- if ('Q' == cmd)
- {
- _delay_ms(100);
- /* move interrupts to application section:
- * uses inline assembly because the procedure must be completed in four cycles.
- */
- asm volatile (
- "ldi r16, 0x01\n" // (1<<IVCE) /* Enable change of interrupt vectors */
- "out 0x35, r16\n" // MCUCR
- "ldi r16, 0x00\n" // (1<<IVSEL) /* Move interrupts to application flash section */
- "out 0x35, r16\n" // MCUCR
- );
- start_sketch();
- // break;
- }
- }
- }
- }
-}
diff --git a/bootloaders/nuevo_diskloader/src/Platform.h b/bootloaders/nuevo_diskloader/src/Platform.h
deleted file mode 100644
index 4b58f9f..0000000
--- a/bootloaders/nuevo_diskloader/src/Platform.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Platform.h
- */
-
-#ifndef __PLATFORM_H__
-#define __PLATFORM_H__
-
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <avr/boot.h>
-#include <util/delay.h>
-#include <avr/interrupt.h>
-#include <avr/wdt.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef __cplusplus
-extern "C"{
-#endif
-
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned long u32;
-
-#define CDC_ENABLED
-
-#define USB_PID_LEONARDO 0x0034
-#define USB_PID_MICRO 0x0035
-#define USB_VID 0x2341 // arduino LLC vid
-#define USB_PID ARDUINO_MODEL_PID // passed in by Makefile - 0x0034 for Leonardo, 0x0035 for MIcro
-
-//#include "USBDesc.h"
-//#include "../../../cores/arduino/USBCore.h"
-
-
-#define min(a,b) ((a)<(b)?(a):(b))
-
-#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
-#define DISABLE_JTAG() MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD)
-
-#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRE |= (1<<6); CPU_PRESCALE(0); DISABLE_JTAG(); // for XXX-series boards
-//#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG(); // for non-XXX boards
-
-// for XXX-series boards
-#define TX_LED_OFF() PORTE |= (1<<6)
-#define TX_LED_ON() PORTE &= ~(1<<6)
-#define RX_LED_OFF() PORTB |= (1<<0)
-#define RX_LED_ON() PORTB &= ~(1<<0)
-#define L_LED_OFF() PORTC &= ~(1<<7)
-#define L_LED_ON() PORTC |= (1<<7)
-#define L_LED_TOGGLE() PORTC ^= (1<<7)
-
-// these for non-XXX boards
-//#define LED0 PORTC &= ~(1<<7)
-//#define LED1 PORTC |= (1<<7)
-//#define TXLED0 PORTD |= (1<<5)
-//#define TXLED1 PORTD &= ~(1<<5)
-//#define RXLED0 PORTB |= (1<<0)
-//#define RXLED1 PORTB &= ~(1<<0)
-
-#ifdef __cplusplus
-} /* extern "C"{ */
-#endif
-
-#include "USBDesc.h"
-#include "USBCore.h"
-#include "USBAPI.h"
-
-#endif /* __PLATFORM_H__ */
diff --git a/bootloaders/nuevo_diskloader/src/USBAPI.h b/bootloaders/nuevo_diskloader/src/USBAPI.h
deleted file mode 100644
index 1724ce1..0000000
--- a/bootloaders/nuevo_diskloader/src/USBAPI.h
+++ /dev/null
@@ -1,83 +0,0 @@
-
-
-#ifndef __USBAPI__
-#define __USBAPI__
-
-#if defined(USBCON)
-
-//================================================================================
-//================================================================================
-// USB
-
-class USB_
-{
-public:
- USB_();
- bool configured();
-
- void attach();
- void detach(); // Serial port goes down too...
- void poll();
-};
-extern USB_ USB;
-
-//================================================================================
-//================================================================================
-// Serial over CDC (Serial1 is the physical port)
-
-class Serial_
-{
-public:
- void begin(uint16_t baud_count);
- void end(void);
-
- virtual int available(void);
- virtual int peek(void);
- virtual int read(void);
- virtual void flush(void);
- virtual size_t write(uint8_t);
-};
-extern Serial_ Serial;
-
-//================================================================================
-//================================================================================
-// Low level API
-
-typedef struct
-{
- uint8_t bmRequestType;
- uint8_t bRequest;
- uint8_t wValueL;
- uint8_t wValueH;
- uint16_t wIndex;
- uint16_t wLength;
-} Setup;
-
-//================================================================================
-//================================================================================
-// CDC 'Driver'
-
-int CDC_GetInterface(uint8_t* interfaceNum);
-int CDC_GetDescriptor(int i);
-bool CDC_Setup(Setup& setup);
-
-//================================================================================
-//================================================================================
-
-#define TRANSFER_PGM 0x80
-#define TRANSFER_RELEASE 0x40
-#define TRANSFER_ZERO 0x20
-
-int USB_SendControl(uint8_t flags, const void* d, int len);
-int USB_RecvControl(void* d, int len);
-
-uint8_t USB_Available(uint8_t ep);
-int USB_Send(uint8_t ep, const void* data, int len); // blocking
-int USB_Recv(uint8_t ep, void* data, int len); // non-blocking
-void USB_Recv_block(u8 ep, u8* dst, int len); // blocking
-int USB_Recv(uint8_t ep); // non-blocking
-void USB_Flush(uint8_t ep);
-
-#endif
-
-#endif /* if defined(USBCON) */ \ No newline at end of file
diff --git a/bootloaders/nuevo_diskloader/src/USBCore.cpp b/bootloaders/nuevo_diskloader/src/USBCore.cpp
deleted file mode 100644
index 56944e5..0000000
--- a/bootloaders/nuevo_diskloader/src/USBCore.cpp
+++ /dev/null
@@ -1,669 +0,0 @@
-
-
-/* Copyright (c) 2010, Peter Barrett
-**
-** Permission to use, copy, modify, and/or distribute this software for
-** any purpose with or without fee is hereby granted, provided that the
-** above copyright notice and this permission notice appear in all copies.
-**
-** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
-** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
-** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-** SOFTWARE.
-*/
-
-#include "Platform.h"
-#include "USBAPI.h"
-#include "USBDesc.h"
-
-#if defined(USBCON)
-
-#define EP_TYPE_CONTROL 0x00
-#define EP_TYPE_BULK_IN 0x81
-#define EP_TYPE_BULK_OUT 0x80
-#define EP_TYPE_INTERRUPT_IN 0xC1
-#define EP_TYPE_INTERRUPT_OUT 0xC0
-#define EP_TYPE_ISOCHRONOUS_IN 0x41
-#define EP_TYPE_ISOCHRONOUS_OUT 0x40
-
-/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */
-#define TX_RX_LED_PULSE_MS 100
-volatile u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */
-volatile u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */
-
-//==================================================================
-//==================================================================
-
-extern const u16 STRING_LANGUAGE[] PROGMEM;
-extern const u16 STRING_IPRODUCT[] PROGMEM;
-extern const u16 STRING_IMANUFACTURER[] PROGMEM;
-extern const DeviceDescriptor USB_DeviceDescriptor PROGMEM;
-extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM;
-
-const u16 STRING_LANGUAGE[2] = {
- (3<<8) | (2+2),
- 0x0409 // English
-};
-
-const u16 STRING_IPRODUCT[17] = {
- (3<<8) | (2+2*16),
-#if USB_PID == USB_PID_LEONARDO
- 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o'
-#elif USB_PID == USB_PID_MICRO
- 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ',' ',' '
-#endif
-};
-
-const u16 STRING_IMANUFACTURER[12] = {
- (3<<8) | (2+2*11),
- 'A','r','d','u','i','n','o',' ','L','L','C'
-};
-
-#ifdef CDC_ENABLED
-#define DEVICE_CLASS 0x02
-#else
-#define DEVICE_CLASS 0x00
-#endif
-
-// DEVICE DESCRIPTOR
-const DeviceDescriptor USB_DeviceDescriptor =
- D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
-
-const DeviceDescriptor USB_DeviceDescriptorA =
- D_DEVICE(DEVICE_CLASS,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1);
-
-//==================================================================
-//==================================================================
-
-volatile u8 _usbConfiguration = 0;
-
-static inline void WaitIN(void)
-{
- while (!(UEINTX & (1<<TXINI)));
-}
-
-static inline void ClearIN(void)
-{
- UEINTX = ~(1<<TXINI);
-}
-
-static inline void WaitOUT(void)
-{
- while (!(UEINTX & (1<<RXOUTI)))
- ;
-}
-
-static inline u8 WaitForINOrOUT()
-{
- while (!(UEINTX & ((1<<TXINI)|(1<<RXOUTI))))
- ;
- return (UEINTX & (1<<RXOUTI)) == 0;
-}
-
-static inline void ClearOUT(void)
-{
- UEINTX = ~(1<<RXOUTI);
-}
-
-void Recv(volatile u8* data, u8 count)
-{
- while (count--)
- *data++ = UEDATX;
-
- RX_LED_ON();
- RxLEDPulse = TX_RX_LED_PULSE_MS;
-}
-
-static inline u8 Recv8()
-{
- RX_LED_ON();
- RxLEDPulse = TX_RX_LED_PULSE_MS;
-
- return UEDATX;
-}
-
-static inline void Send8(u8 d)
-{
- UEDATX = d;
-}
-
-static inline void SetEP(u8 ep)
-{
- UENUM = ep;
-}
-
-static inline u8 FifoByteCount()
-{
- return UEBCLX;
-}
-
-static inline u8 ReceivedSetupInt()
-{
- return UEINTX & (1<<RXSTPI);
-}
-
-static inline void ClearSetupInt()
-{
- UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
-}
-
-static inline void Stall()
-{
- UECONX = (1<<STALLRQ) | (1<<EPEN);
-}
-
-static inline u8 ReadWriteAllowed()
-{
- return UEINTX & (1<<RWAL);
-}
-
-static inline u8 Stalled()
-{
- return UEINTX & (1<<STALLEDI);
-}
-
-static inline u8 FifoFree()
-{
- return UEINTX & (1<<FIFOCON);
-}
-
-static inline void ReleaseRX()
-{
- UEINTX = 0x6B; // FIFOCON=0 NAKINI=1 RWAL=1 NAKOUTI=0 RXSTPI=1 RXOUTI=0 STALLEDI=1 TXINI=1
-}
-
-static inline void ReleaseTX()
-{
- UEINTX = 0x3A; // FIFOCON=0 NAKINI=0 RWAL=1 NAKOUTI=1 RXSTPI=1 RXOUTI=0 STALLEDI=1 TXINI=0
-}
-
-static inline u8 FrameNumber()
-{
- return UDFNUML;
-}
-
-//==================================================================
-//==================================================================
-
-u8 USBGetConfiguration(void)
-{
- return _usbConfiguration;
-}
-
-#define USB_RECV_TIMEOUT
-class LockEP
-{
- u8 _sreg;
-public:
- LockEP(u8 ep) : _sreg(SREG)
- {
- cli();
- SetEP(ep & 7);
- }
- ~LockEP()
- {
- SREG = _sreg;
- }
-};
-
-// Number of bytes, assumes a rx endpoint
-u8 USB_Available(u8 ep)
-{
- LockEP lock(ep);
- return FifoByteCount();
-}
-
-void USB_Recv_block(u8 ep, u8* dst, int len)
-{
-// SetEP(ep & 7);
- LockEP lock(ep);
- while (len--)
- {
- while (!ReadWriteAllowed())
- ;
- *dst++ = Recv8();
- if (!ReadWriteAllowed()) // release empty buffer
- ReleaseRX();
- }
-}
-
-// Non Blocking receive
-// Return number of bytes read
-int USB_Recv(u8 ep, void* d, int len)
-{
- if (!_usbConfiguration || len < 0)
- return -1;
-
- LockEP lock(ep);
- u8 n = FifoByteCount();
- len = min(n,len);
- n = len;
- u8* dst = (u8*)d;
- while (n--)
- *dst++ = Recv8();
- if (len && !FifoByteCount()) // release empty buffer
- ReleaseRX();
-
- return len;
-}
-
-// Recv 1 byte if ready
-int USB_Recv(u8 ep)
-{
- u8 c;
- if (USB_Recv(ep,&c,1) != 1)
- return -1;
- return c;
-}
-
-// Space in send EP
-u8 USB_SendSpace(u8 ep)
-{
- LockEP lock(ep);
- if (!ReadWriteAllowed())
- return 0;
- return 64 - FifoByteCount();
-}
-
-// Blocking Send of data to an endpoint
-int USB_Send(u8 ep, const void* d, int len)
-{
- if (!_usbConfiguration)
- return -1;
-
- int r = len;
- const u8* data = (const u8*)d;
-// u8 zero = ep & TRANSFER_ZERO;
- u8 timeout = 250; // 250ms timeout on send? TODO
- while (len)
- {
- u8 n = USB_SendSpace(ep);
- if (n == 0)
- {
-// if (!(--timeout))
-// return -1;
-// delay(1);
- _delay_ms(1);
- continue;
- }
-
- if (n > len)
- n = len;
- len -= n;
- {
- LockEP lock(ep);
- if (ep & TRANSFER_ZERO)
- {
- while (n--)
- Send8(0);
- }
- else if (ep & TRANSFER_PGM)
- {
- while (n--)
- Send8(pgm_read_byte(data++));
- }
- else
- {
- while (n--)
- Send8(*data++);
- }
- if (!ReadWriteAllowed() || ((len == 0) && (ep & TRANSFER_RELEASE))) // Release full buffer
- ReleaseTX();
- }
- }
- if (ep & TRANSFER_RELEASE)
- ReleaseTX();
-
- TX_LED_ON();
- TxLEDPulse = TX_RX_LED_PULSE_MS;
- return r;
-}
-
-extern const u8 _initEndpoints[] PROGMEM;
-const u8 _initEndpoints[] =
-{
- 0,
-
-#ifdef CDC_ENABLED
- EP_TYPE_INTERRUPT_IN, // CDC_ENDPOINT_ACM
- EP_TYPE_BULK_OUT, // CDC_ENDPOINT_OUT
- EP_TYPE_BULK_IN, // CDC_ENDPOINT_IN
-#endif
-
-#ifdef HID_ENABLED
- EP_TYPE_INTERRUPT_IN // HID_ENDPOINT_INT
-#endif
-};
-
-#define EP_SINGLE_64 0x32 // EP0
-#define EP_DOUBLE_64 0x36 // Other endpoints
-
-static
-void InitEP(u8 index, u8 type, u8 size)
-{
- UENUM = index;
- UECONX = 1;
- UECFG0X = type;
- UECFG1X = size;
-}
-
-static
-void InitEndpoints()
-{
- for (u8 i = 1; i < sizeof(_initEndpoints); i++)
- {
- UENUM = i;
- UECONX = 1;
- UECFG0X = pgm_read_byte(_initEndpoints+i);
- UECFG1X = EP_DOUBLE_64;
- }
- UERST = 0x7E; // And reset them
- UERST = 0;
-}
-
-// Handle CLASS_INTERFACE requests
-static
-bool ClassInterfaceRequest(Setup& setup)
-{
- u8 i = setup.wIndex;
-
-#ifdef CDC_ENABLED
- if (CDC_ACM_INTERFACE == i)
- return CDC_Setup(setup);
-#endif
-
- return false;
-}
-
-int _cmark;
-int _cend;
-void InitControl(int end)
-{
- SetEP(0);
- _cmark = 0;
- _cend = end;
-}
-
-static
-bool SendControl(u8 d)
-{
- if (_cmark < _cend)
- {
- if (!WaitForINOrOUT())
- return false;
- Send8(d);
- if (!((_cmark + 1) & 0x3F))
- ClearIN(); // Fifo is full, release this packet
- }
- _cmark++;
- return true;
-};
-
-// Clipped by _cmark/_cend
-int USB_SendControl(u8 flags, const void* d, int len)
-{
- int sent = len;
- const u8* data = (const u8*)d;
- bool pgm = flags & TRANSFER_PGM;
- while (len--)
- {
- u8 c = pgm ? pgm_read_byte(data++) : *data++;
- if (!SendControl(c))
- return -1;
- }
- return sent;
-}
-
-// Does not timeout or cross fifo boundaries
-// Will only work for transfers <= 64 bytes
-// TODO
-int USB_RecvControl(void* d, int len)
-{
- WaitOUT();
- Recv((u8*)d,len);
- ClearOUT();
- return len;
-}
-
-int SendInterfaces()
-{
- int total = 0;
- u8 interfaces = 0;
-
-#ifdef CDC_ENABLED
- total = CDC_GetInterface(&interfaces);
-#endif
-
- return interfaces;
-}
-
-// Construct a dynamic configuration descriptor
-// This really needs dynamic endpoint allocation etc
-// TODO
-static
-bool SendConfiguration(int maxlen)
-{
- // Count and measure interfaces
- InitControl(0);
- int interfaces = SendInterfaces();
- ConfigDescriptor config = D_CONFIG(_cmark + sizeof(ConfigDescriptor),interfaces);
-
- // Now send them
- InitControl(maxlen);
- USB_SendControl(0,&config,sizeof(ConfigDescriptor));
- SendInterfaces();
- return true;
-}
-
-u8 _cdcComposite = 0;
-
-static
-bool SendDescriptor(Setup& setup)
-{
- u8 t = setup.wValueH;
- if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t)
- return SendConfiguration(setup.wLength);
-
- InitControl(setup.wLength);
-#ifdef HID_ENABLED
- if (HID_REPORT_DESCRIPTOR_TYPE == t)
- return HID_GetDescriptor(t);
-#endif
-
- u8 desc_length = 0;
- const u8* desc_addr = 0;
- if (USB_DEVICE_DESCRIPTOR_TYPE == t)
- {
- if (setup.wLength == 8)
- _cdcComposite = 1;
- desc_addr = _cdcComposite ? (const u8*)&USB_DeviceDescriptorA : (const u8*)&USB_DeviceDescriptor;
- }
- else if (USB_STRING_DESCRIPTOR_TYPE == t)
- {
- if (setup.wValueL == 0)
- desc_addr = (const u8*)&STRING_LANGUAGE;
- else if (setup.wValueL == IPRODUCT)
- desc_addr = (const u8*)&STRING_IPRODUCT;
- else if (setup.wValueL == IMANUFACTURER)
- desc_addr = (const u8*)&STRING_IMANUFACTURER;
- else
- return false;
- }
-
- if (desc_addr == 0)
- return false;
- if (desc_length == 0)
- desc_length = pgm_read_byte(desc_addr);
-
- USB_SendControl(TRANSFER_PGM,desc_addr,desc_length);
- return true;
-}
-
-// Endpoint 0 interrupt
-ISR(USB_COM_vect)
-{
- SetEP(0);
- if (!ReceivedSetupInt())
- return;
-
- Setup setup;
- Recv((u8*)&setup,8);
- ClearSetupInt();
-
- u8 requestType = setup.bmRequestType;
- if (requestType & REQUEST_DEVICETOHOST)
- WaitIN();
- else
- ClearIN();
-
- bool ok = true;
- if (REQUEST_STANDARD == (requestType & REQUEST_TYPE))
- {
- // Standard Requests
- u8 r = setup.bRequest;
- if (GET_STATUS == r)
- {
- Send8(0); // TODO
- Send8(0);
- }
- else if (CLEAR_FEATURE == r)
- {
- }
- else if (SET_FEATURE == r)
- {
- }
- else if (SET_ADDRESS == r)
- {
- WaitIN();
- UDADDR = setup.wValueL | (1<<ADDEN);
- }
- else if (GET_DESCRIPTOR == r)
- {
- ok = SendDescriptor(setup);
- }
- else if (SET_DESCRIPTOR == r)
- {
- ok = false;
- }
- else if (GET_CONFIGURATION == r)
- {
- Send8(1);
- }
- else if (SET_CONFIGURATION == r)
- {
- if (REQUEST_DEVICE == (requestType & REQUEST_RECIPIENT))
- {
- InitEndpoints();
- _usbConfiguration = setup.wValueL;
- } else
- ok = false;
- }
- else if (GET_INTERFACE == r)
- {
- }
- else if (SET_INTERFACE == r)
- {
- }
- }
- else
- {
- InitControl(setup.wLength); // Max length of transfer
- ok = ClassInterfaceRequest(setup);
- }
-
- if (ok)
- ClearIN();
- else
- {
- Stall();
- }
-}
-
-void USB_Flush(u8 ep)
-{
- SetEP(ep);
- if (FifoByteCount())
- ReleaseTX();
-}
-
-// General interrupt
-ISR(USB_GEN_vect)
-{
- u8 udint = UDINT;
- UDINT = 0;
-
- // End of Reset
- if (udint & (1<<EORSTI))
- {
- InitEP(0,EP_TYPE_CONTROL,EP_SINGLE_64); // init ep0
- _usbConfiguration = 0; // not configured yet
- UEIENX = 1 << RXSTPE; // Enable interrupts for ep0
- }
-
- // Start of Frame - happens every millisecond so we use it for TX and RX LED one-shot timing, too
- if (udint & (1<<SOFI))
- {
-//#ifdef CDC_ENABLED
- USB_Flush(CDC_TX); // Send a tx frame if found
-//#endif
-
- // check whether the one-shot period has elapsed. if so, turn off the LED
- if (TxLEDPulse && !(--TxLEDPulse))
- TX_LED_OFF();
- if (RxLEDPulse && !(--RxLEDPulse))
- RX_LED_OFF();
- }
-}
-
-// VBUS or counting frames
-// Any frame counting?
-u8 USBConnected()
-{
- u8 f = UDFNUML;
-// delay(3);
- _delay_ms(3);
- return f != UDFNUML;
-}
-
-//=======================================================================
-//=======================================================================
-
-USB_ USB;
-
-USB_::USB_()
-{
-}
-
-void USB_::attach()
-{
- _usbConfiguration = 0;
- UHWCON = 0x01; // power internal reg
- USBCON = (1<<USBE)|(1<<FRZCLK); // clock frozen, usb enabled
- PLLCSR = 0x12; // Need 16 MHz xtal
- while (!(PLLCSR & (1<<PLOCK))) // wait for lock pll
- ;
- USBCON = ((1<<USBE)|(1<<OTGPADE)); // start USB clock
- UDIEN = (1<<EORSTE)|(1<<SOFE); // Enable interrupts for EOR (End of Reset) and SOF (start of frame)
- UDCON = 0; // enable attach resistor
-}
-
-void USB_::detach()
-{
-}
-
-// Check for interrupts
-// TODO: VBUS detection
-bool USB_::configured()
-{
- return _usbConfiguration;
-}
-
-void USB_::poll()
-{
-}
-
-#endif /* if defined(USBCON) */ \ No newline at end of file
diff --git a/bootloaders/nuevo_diskloader/src/USBCore.h b/bootloaders/nuevo_diskloader/src/USBCore.h
deleted file mode 100644
index 8d13806..0000000
--- a/bootloaders/nuevo_diskloader/src/USBCore.h
+++ /dev/null
@@ -1,303 +0,0 @@
-
-// Copyright (c) 2010, Peter Barrett
-/*
-** Permission to use, copy, modify, and/or distribute this software for
-** any purpose with or without fee is hereby granted, provided that the
-** above copyright notice and this permission notice appear in all copies.
-**
-** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
-** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
-** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-** SOFTWARE.
-*/
-
-#ifndef __USBCORE_H__
-#define __USBCORE_H__
-
-// Standard requests
-#define GET_STATUS 0
-#define CLEAR_FEATURE 1
-#define SET_FEATURE 3
-#define SET_ADDRESS 5
-#define GET_DESCRIPTOR 6
-#define SET_DESCRIPTOR 7
-#define GET_CONFIGURATION 8
-#define SET_CONFIGURATION 9
-#define GET_INTERFACE 10
-#define SET_INTERFACE 11
-
-
-// bmRequestType
-#define REQUEST_HOSTTODEVICE 0x00
-#define REQUEST_DEVICETOHOST 0x80
-#define REQUEST_DIRECTION 0x80
-
-#define REQUEST_STANDARD 0x00
-#define REQUEST_CLASS 0x20
-#define REQUEST_VENDOR 0x40
-#define REQUEST_TYPE 0x60
-
-#define REQUEST_DEVICE 0x00
-#define REQUEST_INTERFACE 0x01
-#define REQUEST_ENDPOINT 0x02
-#define REQUEST_OTHER 0x03
-#define REQUEST_RECIPIENT 0x03
-
-#define REQUEST_DEVICETOHOST_CLASS_INTERFACE (REQUEST_DEVICETOHOST + REQUEST_CLASS + REQUEST_INTERFACE)
-#define REQUEST_HOSTTODEVICE_CLASS_INTERFACE (REQUEST_HOSTTODEVICE + REQUEST_CLASS + REQUEST_INTERFACE)
-
-// Class requests
-
-#define CDC_SET_LINE_CODING 0x20
-#define CDC_GET_LINE_CODING 0x21
-#define CDC_SET_CONTROL_LINE_STATE 0x22
-
-#define MSC_RESET 0xFF
-#define MSC_GET_MAX_LUN 0xFE
-
-#define HID_GET_REPORT 0x01
-#define HID_GET_IDLE 0x02
-#define HID_GET_PROTOCOL 0x03
-#define HID_SET_REPORT 0x09
-#define HID_SET_IDLE 0x0A
-#define HID_SET_PROTOCOL 0x0B
-
-// Descriptors
-
-#define USB_DEVICE_DESC_SIZE 18
-#define USB_CONFIGUARTION_DESC_SIZE 9
-#define USB_INTERFACE_DESC_SIZE 9
-#define USB_ENDPOINT_DESC_SIZE 7
-
-#define USB_DEVICE_DESCRIPTOR_TYPE 1
-#define USB_CONFIGURATION_DESCRIPTOR_TYPE 2
-#define USB_STRING_DESCRIPTOR_TYPE 3
-#define USB_INTERFACE_DESCRIPTOR_TYPE 4
-#define USB_ENDPOINT_DESCRIPTOR_TYPE 5
-
-#define USB_DEVICE_CLASS_COMMUNICATIONS 0x02
-#define USB_DEVICE_CLASS_HUMAN_INTERFACE 0x03
-#define USB_DEVICE_CLASS_STORAGE 0x08
-#define USB_DEVICE_CLASS_VENDOR_SPECIFIC 0xFF
-
-#define USB_CONFIG_POWERED_MASK 0x40
-#define USB_CONFIG_BUS_POWERED 0x80
-#define USB_CONFIG_SELF_POWERED 0xC0
-#define USB_CONFIG_REMOTE_WAKEUP 0x20
-
-// bMaxPower in Configuration Descriptor
-#define USB_CONFIG_POWER_MA(mA) ((mA)/2)
-
-// bEndpointAddress in Endpoint Descriptor
-#define USB_ENDPOINT_DIRECTION_MASK 0x80
-#define USB_ENDPOINT_OUT(addr) ((addr) | 0x00)
-#define USB_ENDPOINT_IN(addr) ((addr) | 0x80)
-
-#define USB_ENDPOINT_TYPE_MASK 0x03
-#define USB_ENDPOINT_TYPE_CONTROL 0x00
-#define USB_ENDPOINT_TYPE_ISOCHRONOUS 0x01
-#define USB_ENDPOINT_TYPE_BULK 0x02
-#define USB_ENDPOINT_TYPE_INTERRUPT 0x03
-
-#define TOBYTES(x) ((x) & 0xFF),(((x) >> 8) & 0xFF)
-
-#define CDC_V1_10 0x0110
-#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02
-
-#define CDC_CALL_MANAGEMENT 0x01
-#define CDC_ABSTRACT_CONTROL_MODEL 0x02
-#define CDC_HEADER 0x00
-#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02
-#define CDC_UNION 0x06
-#define CDC_CS_INTERFACE 0x24
-#define CDC_CS_ENDPOINT 0x25
-#define CDC_DATA_INTERFACE_CLASS 0x0A
-
-#define MSC_SUBCLASS_SCSI 0x06
-#define MSC_PROTOCOL_BULK_ONLY 0x50
-
-#define HID_HID_DESCRIPTOR_TYPE 0x21
-#define HID_REPORT_DESCRIPTOR_TYPE 0x22
-#define HID_PHYSICAL_DESCRIPTOR_TYPE 0x23
-
-
-// Device
-typedef struct {
- u8 len; // 18
- u8 dtype; // 1 USB_DEVICE_DESCRIPTOR_TYPE
- u16 usbVersion; // 0x200
- u8 deviceClass;
- u8 deviceSubClass;
- u8 deviceProtocol;
- u8 packetSize0; // Packet 0
- u16 idVendor;
- u16 idProduct;
- u16 deviceVersion; // 0x100
- u8 iManufacturer;
- u8 iProduct;
- u8 iSerialNumber;
- u8 bNumConfigurations;
-} DeviceDescriptor;
-
-// Config
-typedef struct {
- u8 len; // 9
- u8 dtype; // 2
- u16 clen; // total length
- u8 numInterfaces;
- u8 config;
- u8 iconfig;
- u8 attributes;
- u8 maxPower;
-} ConfigDescriptor;
-
-// String
-
-// Interface
-typedef struct
-{
- u8 len; // 9
- u8 dtype; // 4
- u8 number;
- u8 alternate;
- u8 numEndpoints;
- u8 interfaceClass;
- u8 interfaceSubClass;
- u8 protocol;
- u8 iInterface;
-} InterfaceDescriptor;
-
-// Endpoint
-typedef struct
-{
- u8 len; // 7
- u8 dtype; // 5
- u8 addr;
- u8 attr;
- u16 packetSize;
- u8 interval;
-} EndpointDescriptor;
-
-// Interface Association Descriptor
-// Used to bind 2 interfaces together in CDC compostite device
-typedef struct
-{
- u8 len; // 8
- u8 dtype; // 11
- u8 firstInterface;
- u8 interfaceCount;
- u8 functionClass;
- u8 funtionSubClass;
- u8 functionProtocol;
- u8 iInterface;
-} IADDescriptor;
-
-// CDC CS interface descriptor
-typedef struct
-{
- u8 len; // 5
- u8 dtype; // 0x24
- u8 subtype;
- u8 d0;
- u8 d1;
-} CDCCSInterfaceDescriptor;
-
-typedef struct
-{
- u8 len; // 4
- u8 dtype; // 0x24
- u8 subtype;
- u8 d0;
-} CDCCSInterfaceDescriptor4;
-
-typedef struct
-{
- u8 len;
- u8 dtype; // 0x24
- u8 subtype; // 1
- u8 bmCapabilities;
- u8 bDataInterface;
-} CMFunctionalDescriptor;
-
-typedef struct
-{
- u8 len;
- u8 dtype; // 0x24
- u8 subtype; // 1
- u8 bmCapabilities;
-} ACMFunctionalDescriptor;
-
-typedef struct
-{
- // IAD
- IADDescriptor iad; // Only needed on compound device
-
- // Control
- InterfaceDescriptor cif; //
- CDCCSInterfaceDescriptor header;
- CMFunctionalDescriptor callManagement; // Call Management
- ACMFunctionalDescriptor controlManagement; // ACM
- CDCCSInterfaceDescriptor functionalDescriptor; // CDC_UNION
- EndpointDescriptor cifin;
-
- // Data
- InterfaceDescriptor dif;
- EndpointDescriptor in;
- EndpointDescriptor out;
-} CDCDescriptor;
-
-typedef struct
-{
- InterfaceDescriptor msc;
- EndpointDescriptor in;
- EndpointDescriptor out;
-} MSCDescriptor;
-
-typedef struct
-{
- u8 len; // 9
- u8 dtype; // 0x21
- u8 addr;
- u8 versionL; // 0x101
- u8 versionH; // 0x101
- u8 country;
- u8 desctype; // 0x22 report
- u8 descLenL;
- u8 descLenH;
-} HIDDescDescriptor;
-
-typedef struct
-{
- InterfaceDescriptor hid;
- HIDDescDescriptor desc;
- EndpointDescriptor in;
-} HIDDescriptor;
-
-
-#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \
- { 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs }
-
-#define D_CONFIG(_totalLength,_interfaces) \
- { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(500) }
-
-#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \
- { 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 }
-
-#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \
- { 7, 5, _addr,_attr,_packetSize, _interval }
-
-#define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \
- { 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 }
-
-#define D_HIDREPORT(_descriptorLength) \
- { 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 }
-
-#define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 }
-#define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 }
-
-
-#endif \ No newline at end of file
diff --git a/bootloaders/nuevo_diskloader/src/USBDesc.h b/bootloaders/nuevo_diskloader/src/USBDesc.h
deleted file mode 100644
index a3f1b0f..0000000
--- a/bootloaders/nuevo_diskloader/src/USBDesc.h
+++ /dev/null
@@ -1,65 +0,0 @@
-
-
-/* Copyright (c) 2011, Peter Barrett
-**
-** Permission to use, copy, modify, and/or distribute this software for
-** any purpose with or without fee is hereby granted, provided that the
-** above copyright notice and this permission notice appear in all copies.
-**
-** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
-** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
-** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
-** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-** SOFTWARE.
-*/
-
-#define CDC_ENABLED
-
-#ifdef CDC_ENABLED
-#define CDC_INTERFACE_COUNT 2
-#define CDC_ENPOINT_COUNT 3
-#else
-#define CDC_INTERFACE_COUNT 0
-#define CDC_ENPOINT_COUNT 0
-#endif
-
-#ifdef HID_ENABLED
-#define HID_INTERFACE_COUNT 1
-#define HID_ENPOINT_COUNT 1
-#else
-#define HID_INTERFACE_COUNT 0
-#define HID_ENPOINT_COUNT 0
-#endif
-
-#define CDC_ACM_INTERFACE 0 // CDC ACM
-#define CDC_DATA_INTERFACE 1 // CDC Data
-#define CDC_FIRST_ENDPOINT 1
-#define CDC_ENDPOINT_ACM (CDC_FIRST_ENDPOINT) // CDC First
-#define CDC_ENDPOINT_OUT (CDC_FIRST_ENDPOINT+1)
-#define CDC_ENDPOINT_IN (CDC_FIRST_ENDPOINT+2)
-
-#define HID_INTERFACE (CDC_ACM_INTERFACE + CDC_INTERFACE_COUNT) // HID Interface
-#define HID_FIRST_ENDPOINT (CDC_FIRST_ENDPOINT + CDC_ENPOINT_COUNT)
-#define HID_ENDPOINT_INT (HID_FIRST_ENDPOINT)
-
-#define INTERFACE_COUNT (MSC_INTERFACE + MSC_INTERFACE_COUNT)
-
-#ifdef CDC_ENABLED
-#define CDC_RX CDC_ENDPOINT_OUT
-#define CDC_TX CDC_ENDPOINT_IN
-#endif
-
-#ifdef HID_ENABLED
-#define HID_TX HID_ENDPOINT_INT
-#endif
-
-#define IMANUFACTURER 1
-#define IPRODUCT 2
-#define USB_PID_LEONARDO 0x0034
-#define USB_PID_MICRO 0x0035
-#define USB_VID 0x2341 // arduino LLC vid
-//#define USB_PID ARDUINO_MODEL_USB_PID
-
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 20:35:29 +0000