diff options
Diffstat (limited to 'bootloaders/diskloader')
-rw-r--r-- | bootloaders/diskloader/DiskLoader-Leonardo.hex | 290 | ||||
-rw-r--r-- | bootloaders/diskloader/DiskLoader-Micro.hex | 113 | ||||
-rw-r--r-- | bootloaders/diskloader/Makefile | 198 | ||||
-rw-r--r-- | bootloaders/diskloader/src/CDC.cpp | 93 | ||||
-rw-r--r-- | bootloaders/diskloader/src/DiskLoader.cpp | 304 | ||||
-rw-r--r-- | bootloaders/diskloader/src/Platform.h | 59 | ||||
-rw-r--r-- | bootloaders/diskloader/src/USBAPI.h | 64 | ||||
-rw-r--r-- | bootloaders/diskloader/src/USBCore.cpp | 589 | ||||
-rw-r--r-- | bootloaders/diskloader/src/USBCore.h | 88 | ||||
-rw-r--r-- | bootloaders/diskloader/src/USBDesc.cpp | 82 | ||||
-rw-r--r-- | bootloaders/diskloader/src/USBDesc.h | 45 |
11 files changed, 1046 insertions, 879 deletions
diff --git a/bootloaders/diskloader/DiskLoader-Leonardo.hex b/bootloaders/diskloader/DiskLoader-Leonardo.hex index 4528a8b..0e2c445 100644 --- a/bootloaders/diskloader/DiskLoader-Leonardo.hex +++ b/bootloaders/diskloader/DiskLoader-Leonardo.hex @@ -1,113 +1,179 @@ -:1078000011241FBECFEFDAE0DEBFCDBFF2C04101D1
-:1078100042144505560455026403740300001E9586
-:1078200087020110030000C18081C106C0FF0A0069
-:107830000CA10185037508150026FF00954009017C
-:107840008102954009029102C004030904380341F2
-:107850000072006400750069006E006F0020004C2B
-:107860000065006F006E006100720064006F002010
-:107870000062006F006F0074006C006F00610064B4
-:107880000065007200180341007200640075006911
-:10789000006E006F0020004C004C004300120100FD
-:1078A00002020000404123340000010102000112E5
-:1078B00001000200000040412334000001010200E9
-:1078C00001090264000301008032080B0002020279
-:1078D000010009040000010202000005240010015B
-:1078E0000524010101042402020524060001070504
-:1078F000810310004009040100020A00000007058E
-:107900000202400000070583024000000904020053
-:107910000103000000092101010001221E000705EA
-:1079200084034000400020918A0130918B012C5F3C
-:107930003F4F30938B0120938A01C901892F9927EA
-:107940008695982F803418F08FE7891B982F990F10
-:10795000921710F447980895479A08955D9A289AC7
-:1079600081E08093E0001092E200EE27FF27099467
-:1079700008950F931F93CF93DF93982FEB01042F5C
-:1079800010E088E76030780730F411E083E0FB0115
-:1079900080935700E895892F68E071E0402FF8D078
-:1079A000112311F107B600FCFDCF402F4695FE01D3
-:1079B000A8E0B1E020E031E009C08D919D910C017B
-:1079C00030935700E895112432962F5F2417A8F3BF
-:1079D00085E0FE0180935700E89507B600FCFDCFD7
-:1079E00081E180935700E895DF91CF911F910F912E
-:1079F000089588E10FB6F8948093600010926000BB
-:107A00000FBE5D9A289A47983F9A209A559A90E817
-:107A1000909361001092610081E885BF95BF9FD06F
-:107A200084E18093880180E180938901E0E0F0E0C7
-:107A3000859194918F5F9F4F19F081E080938F0122
-:107A4000EE24FF24BB24B39454EFC52E51E0D52E71
-:107A50000ED2082F8EE098E7FC0124913196029611
-:107A60004491201711F02223B9F71092910110923E
-:107A7000900182E068E071E08BD0013479F460918C
-:107A800008016058633028F0683111F064E001C0EB
-:107A900063E0C62FD0E0CF5DD7480EC0063571F445
-:107AA00080910801803311F011E022C080910A0119
-:107AB000C82FD0E0C25ED74811E022C0053721F4BC
-:107AC00013E0CEE1D8E71CC0053539F4E090080199
-:107AD000F0900901EE0CFF1C0AC0043631F482E07C
-:107AE000B7014091090145DF02C0043721F010E0E1
-:107AF000C5E2D8E705C010910901E701E10EF11CCC
-:107B0000B6D18097B1F483E068E871E041E050E0DD
-:107B100059D0112329F0412F50E083E8BE0152D003
-:107B200083E469E871E041E050E04CD0013509F0B0
-:107B30008FCFD0929101C0929001B0928F01EE242C
-:107B4000FF2486CFFC01289884E680938D0104C031
-:107B50008091F100819361506623D1F708951092CE
-:107B600091011092900110928E0110928F0181E08C
-:107B70008093D70080EA8093D80082E189BD09B460
-:107B800000FEFDCF80E98093D8001092E0000895B8
-:107B9000FB018093E90024E69BE611C08091E80098
-:107BA00085FFFCCF289820938D018091F10081936F
-:107BB0008091E80085FD02C09093E8004150442385
-:107BC00069F70895982FFB01282F20728770809302
-:107BD000E90064E63AE317C08091E80085FFFCCF36
-:107BE00097FF02C0849101C080813196211180E00D
-:107BF0005D9860938C018093F1008091E80085FD91
-:107C000002C03093E800415050408FEF4F3F58077B
-:107C100019F796FF03C08AE38093E80008958091E6
-:107C20009301813299F45D9884E680938C0120E081
-:107C300030E003C080818093F100F901E050FF4FF4
-:107C40002F5F3F4F28303105A9F714C0803261F40F
-:107C50008091E80082FFFCCF80E091E067E072DF76
-:107C60008BEF8093E80006C0823221F4809194016A
-:107C70008093070181E0089520919501223261F1FE
-:107C8000213081F48091980190919901089711F425
-:107C900020939A0180919A01882309F04AC0EFEA63
-:107CA000F8E749C0223021F484E6E1ECF8E717C098
-:107CB000233009F03CC080919401882319F4E9E451
-:107CC000F8E739C0823019F4EDE4F8E734C08130C8
-:107CD00071F5E5E8F8E72FC081E0EBE2F8E7909175
-:107CE0009801382F981708F4392F90918C0120E0D3
-:107CF0004EEF8091E8008570E1F38091E80082FD0D
-:107D000012C02F5F84915D988093F100822F8F7352
-:107D100011F44093E800319694E6231750F39093C2
-:107D20008C0181E0089590938C0180E0089580E0BB
-:107D30000895EDE9F8E78491D2CF1092E90080919F
-:107D4000E80083FF61C082E991E068E0FBDE82EF3A
-:107D50008093E8008091920187FF05C08091E80040
-:107D600080FFFCCF03C08EEF8093E80080919301E9
-:107D7000853051F48091E80080FFFCCF8091940120
-:107D800080688093E30039C08930E1F480919401E8
-:107D900080938E01E7E2F8E791E031E026E39093EB
-:107DA000E9003093EB0084918093EC002093ED0088
-:107DB0009F5F3196953099F78EE78093EA00109295
-:107DC000EA001BC0883049F490918E015D9884E6EA
-:107DD00080938C019093F10010C0882339F45D9852
-:107DE00084E680938C011092F10007C0863011F474
-:107DF00043DF01C014DF882321F08EEF8093E80079
-:107E0000089581E28093EB0008958091E100109243
-:107E1000E100282F83FF0CC01092E90081E08093DD
-:107E2000EB001092EC0082E38093ED0010928E0143
-:107E300022FF1CC080918C01882331F081508093F7
-:107E40008C01882309F45D9A80918D01882331F09B
-:107E5000815080938D01882309F4289A80918F01A5
-:107E6000882321F4109291011092900108951F939C
-:107E7000CF93DF9312E0C0E9D1E05FDFC6DF10935C
-:107E8000E9008091E80085FF13C0289884E680937C
-:107E90008D019091F1008091E80085FD03C08BE693
-:107EA0008093E800892F90E0DF91CF911F91089592
-:107EB000809190019091910101979093910180930D
-:107EC00090018091900190919101892B09F446DDF8
-:0A7ED000CE010197F1F727DDD0CFB6
-:087EDA0000E1000000000000BF
-:040000030000780081
+:10700000BDC00000E0C00000DEC00000DCC0000029
+:10701000DAC00000D8C00000D6C00000D4C0000014
+:10702000D2C00000D0C00000C4C3000036C40000BD
+:10703000CAC00000C8C00000C6C00000C4C0000034
+:10704000C2C00000C0C00000BEC00000BCC0000044
+:10705000BAC00000B8C00000B6C00000B4C0000054
+:10706000B2C00000B0C00000AEC00000ACC0000064
+:10707000AAC00000A8C00000A6C00000A4C0000074
+:10708000A2C00000A0C000009EC000009CC0000084
+:107090009AC0000098C0000096C0000094C0000094
+:1070A00092C0000090C000008EC0000011241FBEDE
+:1070B000CFEFDAE0DEBFCDBF2AC1080B000202022B
+:1070C0000100090400000102020000052400100173
+:1070D0000524010101042402060524060001070518
+:1070E000810310004009040100020A0000000705A6
+:1070F00002024000000705830240000041014214E3
+:107100004505560455026403740300001E9587026A
+:10711000011003000403090422034100720064000B
+:10712000750069006E006F0020004C0065006F0064
+:107130006E006100720064006F001803410072006D
+:107140006400750069006E006F0020004C004C0068
+:1071500043001201000200000040412334000001FE
+:10716000010200011201000202000040412334002C
+:1071700000010102000100C180813D3C11241FBEBD
+:10718000CFEFDAE0DEBFCDBF11E0A0E0B1E0E6EF87
+:10719000FAE702C005900D92A830B107D9F711E0C7
+:1071A000A8E0B1E001C01D92A739B107E1F711E7EE
+:1071B000CCE7D1E703C02297FE0197D4CA37D107A5
+:1071C000D1F7A5D096C41CCFFC0180818E5F80834F
+:1071D00080E86AEB70E742E450E09DC2FC018181E7
+:1071E0009081913A49F48132C1F480E060E071E02D
+:1071F00047E050E090D20FC0913279F4803231F400
+:1072000080E091E067E070E0C2D205C0823229F4EC
+:1072100082818093070181E0089580E008952091A4
+:107220008C0130918D012F5F3F4F30938D01209362
+:107230008C01C901892F99278695982F803418F0E1
+:107240008FE7891B982F990F921710F4479808958C
+:10725000479A0895E0E0F0E0859194918F5F9F4F09
+:1072600081F04798289A769AF89401E005BF00E0EB
+:1072700005BF81E08093E0001092E200EE27FF2737
+:1072800009940895FF920F931F93CF93DF93982F44
+:107290008B01FF2480E76030780738F4FF24F394F3
+:1072A00083E0FB0180935700E895C42FD0E0892F3D
+:1072B00068E071E0AE0121D1FF2019F107B600FCB2
+:1072C000FDCFD595C7954C2FF801A8E0B1E020E09F
+:1072D00031E009C08D919D910C0130935700E895E4
+:1072E000112432962F5F2417A8F385E0F8018093CC
+:1072F0005700E89507B600FCFDCF81E18093570069
+:10730000E895DF91CF911F910F91FF90089588E14B
+:107310000FB6F89480936000109260000FBE3F9A01
+:10732000209A6E9A90E8909361001092610081E833
+:1073300085BF95BF01E005BF02E005BF769A289A98
+:10734000479886E991E083D2789484E1809388011C
+:1073500080E180938901CC24DD2470E9A72E71E0BF
+:10736000B72E02C0CC24DD2482E0BED0882309F4ED
+:1073700093C082E017D1E82E8CEF90E7FC012491B6
+:107380003196029644912E1511F02223B9F71092EE
+:107390008B0110928A0150E082E068E071E0ADD08C
+:1073A000F1E4EF1679F4609108016058633028F039
+:1073B000683111F064E001C063E0C62FD0E0C15F26
+:1073C000DE4810C026E5E21681F480910801803382
+:1073D00019F0FF24F39428C080910A01C82FD0E04F
+:1073E000C45FDE48FF24F39427C085E7E81629F43C
+:1073F00063E0F62ECCE0D1E71FC0E5E5EE1639F4E8
+:10740000C0900801D0900901CC0CDD1C0CC0F4E642
+:10741000EF1631F482E0B6014091090133DF03C079
+:1074200024E7E21621F0FF24C3E1D1E705C0F09084
+:107430000901E601CF0CD11C08E813E1015010400E
+:107440000930110509F43BC082E04ED0882309F0D1
+:1074500036C0F4CF809709F085CF83E068E871E00B
+:1074600041E050E0C7D0FF2029F04F2D50E083E8E5
+:10747000BE01C0D083E469E871E041E050E0BAD0D9
+:1074800081E5E81609F070CF88EE93E0F5013197B9
+:10749000F1F70197D9F711C0C2DEC5010197F1F7E5
+:1074A00080918A0190918B01019790938B01809339
+:1074B0008A010196019709F057CFCCDE55CF82E0C3
+:1074C00071D0EFEF8F3F9E0709F0C4CFC6CFFC010C
+:1074D00004C08091F100819361506623D1F7289810
+:1074E00084E680938F0108959FB7F8948770809306
+:1074F000E9008091F2009FBF0895FB019FB7F894C7
+:1075000087708093E90034E62BE610C08091E80094
+:1075100085FFFCCF289830938F018091F1008193F3
+:107520008091E80085FD02C02093E8004150504062
+:107530008FEF4F3F580751F79FBF0895282F809135
+:1075400090018823C1F057FF1AC015C02898909366
+:107550008F018091F1008193E217F307B9F741158C
+:10756000510539F08091F200882319F48BE680935D
+:10757000E800AFBF02C04FEF5FEFCA010895AFB799
+:10758000F89427702093E9008091F200282F30E0D2
+:10759000241735070CF4A901FB019B01240F311DB1
+:1075A00094E6DACFDF93CF930F92CDB7DEB7BE016B
+:1075B0006F5F7F4F41E050E0C1DF019719F08FEF1F
+:1075C0009FEF02C0898190E00F90CF91DF910895E5
+:1075D0002FB7F89487708093E9008091E80085FDCB
+:1075E00002C090E004C08091F20090E4981B2FBF8D
+:1075F000892F08955F926F927F928F929F92AF92A0
+:10760000BF92CF92DF92EF92FF920F931F93CF938F
+:10761000DF93F82E6A0180919001882319F44FEFCF
+:107620005FEF68C08B01EA0157E0E52EEF208F2D58
+:1076300090E040E2842E912C882299223AE3532E46
+:1076400020E4A22EB12CA822B92280EA682E8FE075
+:10765000782E43C08F2DBCDF282F882321F4C3014F
+:107660000197F1F73AC090E0C817D9070CF42C2F16
+:10767000C21BD1094FB7F894E092E900811491043C
+:1076800021F406C01092F10021502223D9F719C02D
+:10769000F7FC03C0F801922F10C0C801322F06C0BA
+:1076A000FC010196E491E093F10031503323C1F7DE
+:1076B00006C081918093F10091509923D1F7020F78
+:1076C000111D8091E80085FF05C0209729F4A114C1
+:1076D000B10411F05092E8004FBF209709F0BACFE3
+:1076E000F6FE03C08AE38093E800769884E68093F0
+:1076F0008E01A601CA01DF91CF911F910F91FF90DA
+:10770000EF90DF90CF90BF90AF909F908F907F9041
+:107710006F905F9008950F931F93182FFB01A09116
+:107720009301B0919401BA010EEF2AC017FF02C075
+:10773000949101C0908120919101309192012A177A
+:107740003B07ACF48091E8008570E1F38091E8009C
+:1077500082FF03C04FEF5FEF16C09093F100C901A5
+:1077600001968F739070892B11F40093E8002F5FBE
+:107770003F4F3093920120939101615070403196B8
+:107780006115710599F6CA011F910F910895CF9364
+:10779000DF939C01EB018091E80082FFFCCFC901DF
+:1077A0006C2F95DE8BEF8093E800CE01DF91CF91B7
+:1077B00008951F920F920FB60F9211242F933F93AB
+:1077C0008F938091E1001092E100282F83FF0FC07A
+:1077D0001092E90081E08093EB001092EC0082E3CC
+:1077E0008093ED001092900188E08093F00022FFDA
+:1077F00026C083E08093E9008091F200882319F08D
+:107800008AE38093E80080918E01882351F0809173
+:107810008E01815080938E0180918E01882309F41E
+:10782000769A80918F01882351F080918F01815049
+:1078300080938F0180918F01882309F4289A8F917A
+:107840003F912F910F900FBE0F901F90189510929F
+:10785000900181E08093D70080EA8093D80082E194
+:1078600089BD09B400FEFDCF80E98093D8008CE08B
+:107870008093E2001092E00008950895DF93CF9383
+:107880000F92CDB7DEB71982CE0101969DDC8981BA
+:1078900090E00F90CF91DF9108951F920F920FB655
+:1078A0000F921124EF92FF921F932F933F934F93C8
+:1078B0005F936F937F938F939F93AF93BF93EF9358
+:1078C000FF93DF93CF93CDB7DEB76197DEBFCDBF18
+:1078D0001092E9008091E80083FFECC0CE01019690
+:1078E00068E0F5DD82EF8093E800998197FF05C09D
+:1078F0008091E80080FFFCCF03C08EEF8093E8000A
+:10790000292F30E0C90180769070892B09F0B3C02F
+:107910008A81882329F41092F1001092F100BFC0EF
+:10792000813009F4BCC0833009F4B9C0853049F412
+:107930008091E80080FFFCCF8B8180688093E3001A
+:10794000AEC0863009F06DC01C81EF80F884123023
+:10795000A9F51092E90010929201109291011092F3
+:107960009401109293018ADF99E0FE013996DF01BC
+:10797000292F1D922A95E9F799871A8791E09E870A
+:1079800090E8988B9AEF998B209191013091920118
+:10799000275F3F4F3C872B878D871092E90010921D
+:1079A000920110929101F0929401E092930180E093
+:1079B000BF0149E050E0AFDE61DF71C01092E90025
+:1079C0001092920110929101F0929401E092930131
+:1079D000113071F488E0E816F10411F41093950168
+:1079E00080919501882309F062C0E2E5F1E713C0B8
+:1079F000133009F058C08B81882319F4E4E1F1E7D2
+:107A00000AC0823019F4E8E1F1E705C0813009F0DD
+:107A10004AC0EAE3F1E7449150E080E8BF017BDE31
+:107A20003EC0873009F43FC0883021F481E0809364
+:107A3000F10035C0893099F523703070232B99F50A
+:107A4000E7E7F1E791E031E026E39093E900309336
+:107A5000EB0084918093EC002093ED009F5F3196C2
+:107A6000943099F78EE78093EA001092EA008B81B8
+:107A70008093900114C08F8198851092E900109234
+:107A800092011092910190939401809393018D81C2
+:107A9000882349F4CE010196A1DB882321F08EEFE3
+:107AA0008093E80007C081E28093EB0003C0E4E626
+:107AB000F1E7B1CF6196DEBFCDBFCF91DF91FF91EE
+:107AC000EF91BF91AF919F918F917F916F915F9156
+:107AD0004F913F912F911F91FF90EF900F900FBE0C
+:107AE0000F901F901895EE0FFF1F0590F491E02D59
+:067AF0000994F894FFCF99
+:087AF60000E1000000000000A7
+:040000030000700089
:00000001FF
diff --git a/bootloaders/diskloader/DiskLoader-Micro.hex b/bootloaders/diskloader/DiskLoader-Micro.hex deleted file mode 100644 index fbbcc52..0000000 --- a/bootloaders/diskloader/DiskLoader-Micro.hex +++ /dev/null @@ -1,113 +0,0 @@ -:1078000011241FBECFEFDAE0DEBFCDBFF2C04101D1
-:1078100042144505560455026403740300001E9586
-:1078200087020110030000C18081C106C0FF0A0069
-:107830000CA10185037508150026FF00954009017C
-:107840008102954009029102C004030904380341F2
-:107850000072006400750069006E006F0020004D2A
-:10786000006900630072006F00200062006F006F0B
-:107870000074006C006F00610064006500720020FD
-:1078800000200020001803410072006400750069A8
-:10789000006E006F0020004C004C004300120100FD
-:1078A00002020000404123350000010102000112E4
-:1078B00001000200000040412335000001010200E8
-:1078C00001090264000301008032080B0002020279
-:1078D000010009040000010202000005240010015B
-:1078E0000524010101042402020524060001070504
-:1078F000810310004009040100020A00000007058E
-:107900000202400000070583024000000904020053
-:107910000103000000092101010001221E000705EA
-:1079200084034000400020918A0130918B012C5F3C
-:107930003F4F30938B0120938A01C901892F9927EA
-:107940008695982F803418F08FE7891B982F990F10
-:10795000921710F447980895479A08955D9A289AC7
-:1079600081E08093E0001092E200EE27FF27099467
-:1079700008950F931F93CF93DF93982FEB01042F5C
-:1079800010E088E76030780730F411E083E0FB0115
-:1079900080935700E895892F68E071E0402FF8D078
-:1079A000112311F107B600FCFDCF402F4695FE01D3
-:1079B000A8E0B1E020E031E009C08D919D910C017B
-:1079C00030935700E895112432962F5F2417A8F3BF
-:1079D00085E0FE0180935700E89507B600FCFDCFD7
-:1079E00081E180935700E895DF91CF911F910F912E
-:1079F000089588E10FB6F8948093600010926000BB
-:107A00000FBE5D9A289A47983F9A209A559A90E817
-:107A1000909361001092610081E885BF95BF9FD06F
-:107A200084E18093880180E180938901E0E0F0E0C7
-:107A3000859194918F5F9F4F19F081E080938F0122
-:107A4000EE24FF24BB24B39454EFC52E51E0D52E71
-:107A50000ED2082F8EE098E7FC0124913196029611
-:107A60004491201711F02223B9F71092910110923E
-:107A7000900182E068E071E08BD0013479F460918C
-:107A800008016058633028F0683111F064E001C0EB
-:107A900063E0C62FD0E0CF5DD7480EC0063571F445
-:107AA00080910801803311F011E022C080910A0119
-:107AB000C82FD0E0C25ED74811E022C0053721F4BC
-:107AC00013E0CEE1D8E71CC0053539F4E090080199
-:107AD000F0900901EE0CFF1C0AC0043631F482E07C
-:107AE000B7014091090145DF02C0043721F010E0E1
-:107AF000C5E2D8E705C010910901E701E10EF11CCC
-:107B0000B6D18097B1F483E068E871E041E050E0DD
-:107B100059D0112329F0412F50E083E8BE0152D003
-:107B200083E469E871E041E050E04CD0013509F0B0
-:107B30008FCFD0929101C0929001B0928F01EE242C
-:107B4000FF2486CFFC01289884E680938D0104C031
-:107B50008091F100819361506623D1F708951092CE
-:107B600091011092900110928E0110928F0181E08C
-:107B70008093D70080EA8093D80082E189BD09B460
-:107B800000FEFDCF80E98093D8001092E0000895B8
-:107B9000FB018093E90024E69BE611C08091E80098
-:107BA00085FFFCCF289820938D018091F10081936F
-:107BB0008091E80085FD02C09093E8004150442385
-:107BC00069F70895982FFB01282F20728770809302
-:107BD000E90064E63AE317C08091E80085FFFCCF36
-:107BE00097FF02C0849101C080813196211180E00D
-:107BF0005D9860938C018093F1008091E80085FD91
-:107C000002C03093E800415050408FEF4F3F58077B
-:107C100019F796FF03C08AE38093E80008958091E6
-:107C20009301813299F45D9884E680938C0120E081
-:107C300030E003C080818093F100F901E050FF4FF4
-:107C40002F5F3F4F28303105A9F714C0803261F40F
-:107C50008091E80082FFFCCF80E091E067E072DF76
-:107C60008BEF8093E80006C0823221F4809194016A
-:107C70008093070181E0089520919501223261F1FE
-:107C8000213081F48091980190919901089711F425
-:107C900020939A0180919A01882309F04AC0EFEA63
-:107CA000F8E749C0223021F484E6E1ECF8E717C098
-:107CB000233009F03CC080919401882319F4E9E451
-:107CC000F8E739C0823019F4EDE4F8E734C08130C8
-:107CD00071F5E5E8F8E72FC081E0EBE2F8E7909175
-:107CE0009801382F981708F4392F90918C0120E0D3
-:107CF0004EEF8091E8008570E1F38091E80082FD0D
-:107D000012C02F5F84915D988093F100822F8F7352
-:107D100011F44093E800319694E6231750F39093C2
-:107D20008C0181E0089590938C0180E0089580E0BB
-:107D30000895EDE9F8E78491D2CF1092E90080919F
-:107D4000E80083FF61C082E991E068E0FBDE82EF3A
-:107D50008093E8008091920187FF05C08091E80040
-:107D600080FFFCCF03C08EEF8093E80080919301E9
-:107D7000853051F48091E80080FFFCCF8091940120
-:107D800080688093E30039C08930E1F480919401E8
-:107D900080938E01E7E2F8E791E031E026E39093EB
-:107DA000E9003093EB0084918093EC002093ED0088
-:107DB0009F5F3196953099F78EE78093EA00109295
-:107DC000EA001BC0883049F490918E015D9884E6EA
-:107DD00080938C019093F10010C0882339F45D9852
-:107DE00084E680938C011092F10007C0863011F474
-:107DF00043DF01C014DF882321F08EEF8093E80079
-:107E0000089581E28093EB0008958091E100109243
-:107E1000E100282F83FF0CC01092E90081E08093DD
-:107E2000EB001092EC0082E38093ED0010928E0143
-:107E300022FF1CC080918C01882331F081508093F7
-:107E40008C01882309F45D9A80918D01882331F09B
-:107E5000815080938D01882309F4289A80918F01A5
-:107E6000882321F4109291011092900108951F939C
-:107E7000CF93DF9312E0C0E9D1E05FDFC6DF10935C
-:107E8000E9008091E80085FF13C0289884E680937C
-:107E90008D019091F1008091E80085FD03C08BE693
-:107EA0008093E800892F90E0DF91CF911F91089592
-:107EB000809190019091910101979093910180930D
-:107EC00090018091900190919101892B09F446DDF8
-:0A7ED000CE010197F1F727DDD0CFB6
-:087EDA0000E1000000000000BF
-:040000030000780081
-:00000001FF
diff --git a/bootloaders/diskloader/Makefile b/bootloaders/diskloader/Makefile index 6ac3db3..0ae99e8 100644 --- a/bootloaders/diskloader/Makefile +++ b/bootloaders/diskloader/Makefile @@ -1,105 +1,103 @@ -############################################################################### -# Makefile for DiskLoader -############################################################################### - -## General Flags -PROJECT = DiskLoader -TARGET = DiskLoader.elf -CC = avr-gcc - -# BOARD2 -MCU = atmega32u4 -AVR_FREQ = 16000000L - +###############################################################################
+# Makefile for DiskLoader
+###############################################################################
+
+## General Flags
+PROJECT = DiskLoader
+TARGET = DiskLoader.elf
+CC = avr-gcc
+
+# BOARD2
+MCU = atmega32u4
+AVR_FREQ = 16000000L
+
# Specify the Arduino model using the assigned PID. This is used by Descriptors.c
# to set PID and product descriptor string
# Arduino Leonardo PID
ARDUINO_MODEL_PID = 0x0034
# Arduino Micro PID
-#ARDUINO_MODEL_PID = 0x0035 - -# Change if your programmer is different -AVRDUDE_PROGRAMMER = avrispmkII -AVRDUDE_PORT = usb - -# program name should not be changed... -PROGRAM = DiskLoader - -AVRDUDE = avrdude -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -p $(MCU) - -## Options common to compile, link and assembly rules -COMMON = -mmcu=$(MCU) - -override CFLAGS = -g -Wall -Os -mmcu=$(MCU) -DF_CPU=$(AVR_FREQ) -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) $(DEFS) -ffunction-sections -gdwarf-2 -fdata-sections -fno-split-wide-types - -## Assembly specific flags -ASMFLAGS = $(COMMON) -ASMFLAGS += $(CFLAGS) -ASMFLAGS += -x assembler-with-cpp -Wa,-gdwarf2 - -## Linker flags -LDFLAGS = $(COMMON) -LDFLAGS += -Wl,-gc-sections,-Map=DiskLoader.map,--section-start=.text=0x7800,--relax -LDFLAGS += -nodefaultlibs -nostartfiles - - -## Intel Hex file production flags -HEX_EEPROM_FLAGS = -j .eeprom -HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load" -HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings - -## Objects explicitly added by the user -LINKONLYOBJECTS = - -MODULES := . -SRC_DIR := $(addprefix src/,$(MODULES)) -BUILD_DIR := $(addprefix build/,$(MODULES)) - -SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.cpp)) -OBJ := $(patsubst src/%.cpp,build/%.o,$(SRC)) -DEP := $(OBJ:%.o=%.d) -INCLUDES := $(addprefix -I,$(SRC_DIR)) - -vpath %.cpp $(SRC_DIR) - -.PHONY: all checkdirs clean - -all: checkdirs $(TARGET) DiskLoader.hex DiskLoader.lss size - --include $(DEP) - -checkdirs: $(BUILD_DIR) - -$(BUILD_DIR): - @mkdir -p $@ - -clean: - @rm -rf build/ - @rm -f *.hex - @rm -f *.elf - @rm -f *.lss - @rm -f *.map - -define make-goal -$1/%.o: %.cpp - $(CC) $(INCLUDES) $(CFLAGS) -c $$< -MD -o $$@ -endef - -$(foreach bdir,$(BUILD_DIR),$(eval $(call make-goal,$(bdir)))) - -$(TARGET): $(OBJ) - $(CC) $(LDFLAGS) $(LINKONLYOBJECTS) $(LIBDIRS) $(LIBS) $^ -o $@ - -%.hex: $(TARGET) - avr-objcopy -O ihex $(HEX_FLASH_FLAGS) $< $@ - -%.lss: $(TARGET) - avr-objdump -h -S $< > $@ - -size: $(TARGET) - @echo -# @avr-size -C --mcu=${MCU} ${TARGET}.elf - -program: $(TARGET).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -B 5 -u -U flash:w:$(TARGET).hex
\ No newline at end of file +#ARDUINO_MODEL_PID = 0x0035
+
+# Change if your programmer is different
+AVRDUDE_PROGRAMMER = avrispmkII
+AVRDUDE_PORT = usb
+
+# program name should not be changed...
+PROGRAM = DiskLoader
+
+AVRDUDE = avrdude
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -p $(MCU)
+
+## Options common to compile, link and assembly rules
+COMMON = -mmcu=$(MCU)
+
+override CFLAGS = -g -Wall -Os -mmcu=$(MCU) -DF_CPU=$(AVR_FREQ) -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) $(DEFS) -ffunction-sections -gdwarf-2 -fdata-sections -fno-split-wide-types
+
+## Assembly specific flags
+ASMFLAGS = $(COMMON)
+ASMFLAGS += $(CFLAGS)
+ASMFLAGS += -x assembler-with-cpp -Wa,-gdwarf2
+
+## Linker flags
+LDFLAGS = $(COMMON)
+LDFLAGS += -Wl,-gc-sections,-Map=DiskLoader.map,--section-start=.text=0x7000,--relax
+
+## Intel Hex file production flags
+HEX_EEPROM_FLAGS = -j .eeprom
+HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load"
+HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings
+
+## Objects explicitly added by the user
+LINKONLYOBJECTS =
+
+MODULES := .
+SRC_DIR := $(addprefix src/,$(MODULES))
+BUILD_DIR := $(addprefix build/,$(MODULES))
+
+SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.cpp))
+OBJ := $(patsubst src/%.cpp,build/%.o,$(SRC))
+DEP := $(OBJ:%.o=%.d)
+INCLUDES := $(addprefix -I,$(SRC_DIR))
+
+vpath %.cpp $(SRC_DIR)
+
+.PHONY: all checkdirs clean
+
+all: checkdirs $(TARGET) DiskLoader.hex DiskLoader.lss size
+
+-include $(DEP)
+
+checkdirs: $(BUILD_DIR)
+
+$(BUILD_DIR):
+ @mkdir -p $@
+
+clean:
+ @rm -rf build/
+ @rm -f *.hex
+ @rm -f *.elf
+ @rm -f *.lss
+ @rm -f *.map
+
+define make-goal
+$1/%.o: %.cpp
+ $(CC) $(INCLUDES) $(CFLAGS) -c $$< -MD -o $$@
+endef
+
+$(foreach bdir,$(BUILD_DIR),$(eval $(call make-goal,$(bdir))))
+
+$(TARGET): $(OBJ)
+ $(CC) $(LDFLAGS) $(LINKONLYOBJECTS) $(LIBDIRS) $(LIBS) $^ -o $@
+
+%.hex: $(TARGET)
+ avr-objcopy -O ihex $(HEX_FLASH_FLAGS) $< $@
+
+%.lss: $(TARGET)
+ avr-objdump -h -S $< > $@
+
+size: $(TARGET)
+ @echo
+# @avr-size -C --mcu=${MCU} ${TARGET}.elf
+
+program: $(TARGET).hex
+ $(AVRDUDE) $(AVRDUDE_FLAGS) -B 1 -u -U flash:w:$(TARGET).hex
diff --git a/bootloaders/diskloader/src/CDC.cpp b/bootloaders/diskloader/src/CDC.cpp new file mode 100644 index 0000000..4496a9c --- /dev/null +++ b/bootloaders/diskloader/src/CDC.cpp @@ -0,0 +1,93 @@ + + +/* Copyright (c) 2011, Peter Barrett +** +** Permission to use, copy, modify, and/or distribute this software for +** any purpose with or without fee is hereby granted, provided that the +** above copyright notice and this permission notice appear in all copies. +** +** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL +** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR +** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES +** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +** SOFTWARE. +*/ + +#include "Platform.h" +#include "USBAPI.h" +#include <avr/wdt.h> + +#if defined(USBCON) + +typedef struct +{ + u32 dwDTERate; + u8 bCharFormat; + u8 bParityType; + u8 bDataBits; + u8 lineState; +} LineInfo; + +static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; + +#define WEAK __attribute__ ((weak)) + +extern const CDCDescriptor _cdcInterface PROGMEM; +const CDCDescriptor _cdcInterface = +{ + D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), + + // CDC communication interface + D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), + D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) + D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not) + D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported + D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 + D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), + + // CDC data interface + D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), + D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), + D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) +}; + +int WEAK CDC_GetInterface(u8* interfaceNum) +{ + interfaceNum[0] += 2; // uses 2 + return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface)); +} + +bool WEAK CDC_Setup(Setup& setup) +{ + u8 r = setup.bRequest; + u8 requestType = setup.bmRequestType; + + if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) + { + if (CDC_GET_LINE_CODING == r) + { + USB_SendControl(0,(void*)&_usbLineInfo,7); + return true; + } + } + + if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) + { + if (CDC_SET_LINE_CODING == r) + { + USB_RecvControl((void*)&_usbLineInfo,7); + return true; + } + + if (CDC_SET_CONTROL_LINE_STATE == r) + { + _usbLineInfo.lineState = setup.wValueL; + return true; + } + } + return false; +} +#endif /* if defined(USBCON) */ diff --git a/bootloaders/diskloader/src/DiskLoader.cpp b/bootloaders/diskloader/src/DiskLoader.cpp index 6580618..2792bc6 100644 --- a/bootloaders/diskloader/src/DiskLoader.cpp +++ b/bootloaders/diskloader/src/DiskLoader.cpp @@ -1,64 +1,67 @@ - +/* + * DiskLoader.cpp + */ #include "Platform.h" -// This bootloader creates a composite Serial device -// -// The serial interface supports a STK500v1 protocol that is very similar to optiboot -// -// The bootloader will timeout and start the firmware after a few hundred milliseconds -// if a usb connection is not detected. -// -// The tweakier code is to keep the bootloader below 2k (no interrupt table, for example) - extern "C" void entrypoint(void) __attribute__ ((naked)) __attribute__ ((section (".vectors"))); void entrypoint(void) { asm volatile ( - "eor r1, r1\n" // Zero register - "out 0x3F, r1\n" // SREG - "ldi r28, 0xFF\n" - "ldi r29, 0x0A\n" - "out 0x3E, r29\n" // SPH - "out 0x3D, r28\n" // SPL - "rjmp main" // Stack is all set up, start the main code - ::); + "eor r1, r1\n" // Zero register + "out 0x3F, r1\n" // SREG + "ldi r28, 0xFF\n" // Y-register + "ldi r29, 0x0A\n" // Y-register + "out 0x3E, r29\n" // SPH + "out 0x3D, r28\n" // SPL + "rjmp main" // Stack is all set up, start the main code + ::); } u8 _flashbuf[128]; u8 _inSync; u8 _ok; -extern volatile u8 _ejected; -extern volatile u16 _timeout; +u16 do_reset = 0; +volatile u16 _timeout = 0; void Program(u8 ep, u16 page, u8 count) { - u8 write = page < 30*1024; // Don't write over firmware please + u8 write = page < 28*1024; // Don't write over bootloader please if (write) boot_page_erase(page); - - Recv(ep,_flashbuf,count); // Read while page is erasing - + + USB_Recv_block(ep,_flashbuf,count); // Read while page is erasing + if (!write) return; - + boot_spm_busy_wait(); // Wait until the memory is erased. - + count >>= 1; u16* p = (u16*)page; u16* b = (u16*)_flashbuf; for (u8 i = 0; i < count; i++) boot_page_fill(p++, b[i]); - + boot_page_write(page); boot_spm_busy_wait(); boot_rww_enable (); } - -int USBGetChar(); -#define getch USBGetChar +u16 _pulse; +void LEDPulse() +{ + _pulse += 1; + u8 p = _pulse >> 9; + if (p > 63) + p = 127-p; + p += p; + if (((u8)_pulse) > p) + L_LED_OFF(); + else + L_LED_ON(); +} #define HW_VER 0x02 #define SW_MAJOR 0x01 @@ -104,136 +107,147 @@ const u8 _consts[] = 0x00, // }; +void start_sketch() +{ + if (pgm_read_word(0) == -1) // no sketch has been uploaded yet - stay in bootloader + return; + + L_LED_OFF(); + RX_LED_OFF(); + TX_LED_OFF(); + /* move interrupts to application section: + * uses inline assembly because the procedure must be completed in four cycles. + */ + cli(); // disable interrupts first + asm volatile ( + "ldi r16, 0x01\n" // (1<<IVCE) /* Enable change of interrupt vectors */ + "out 0x35, r16\n" // MCUCR + "ldi r16, 0x00\n" // (1<<IVSEL) /* Move interrupts to application flash section */ + "out 0x35, r16\n" // MCUCR + ); + UDCON = 1; // Detatch USB + UDIEN = 0; + asm volatile ( // Reset vector to run firmware + "clr r30\n" + "clr r31\n" + "ijmp\n" + ::); +} -void USBInit(void); int main(void) __attribute__ ((naked)); - -// STK500v1 main loop, very similar to optiboot in protocol and implementation -int main() -{ +int main() +{ wdt_disable(); - TXLED0; - RXLED0; - LED0; BOARD_INIT(); - USBInit(); - + /* move interrupts to boot section: + * uses inline assembly because the procedure must be completed in four cycles. + * seems to fail if called before disabling WDT and calling BOARD_INIT() + */ + asm volatile ( + "ldi r16, 0x01\n" // (1<<IVCE) /* Enable change of interrupt vectors */ + "out 0x35, r16\n" // MCUCR + "ldi r16, 0x02\n" // (1<<IVSEL) /* Move interrupts to boot flash section */ + "out 0x35, r16\n" // MCUCR + ); + TX_LED_OFF(); + RX_LED_OFF(); + L_LED_OFF(); + USB.attach(); + sei(); + _inSync = STK_INSYNC; _ok = STK_OK; - - if (pgm_read_word(0) != -1) - _ejected = 1; - - for(;;) + + for (;;) { u8* packet = _flashbuf; u16 address = 0; for (;;) - { - u8 cmd = getch(); - - // Read packet contents - u8 len; - const u8* rs = _readSize; - for(;;) + { + if (USB_Available(CDC_RX)) { - u8 c = pgm_read_byte(rs++); - len = pgm_read_byte(rs++); - if (c == cmd || c == 0) + u8 cmd = USB_Recv(CDC_RX); + + // Read packet contents + u8 len; + const u8* rs = _readSize; + for (;;) + { + u8 c = pgm_read_byte(rs++); + len = pgm_read_byte(rs++); + if (c == cmd || c == 0) + break; + } + _timeout = 0; + // Read params + USB_Recv_block(CDC_RX, packet, len); + + // Send a response + u8 send = 0; + const u8* pgm = _consts+7; + if (STK_GET_PARAMETER == cmd) + { + u8 i = packet[0] - 0x80; + if (i > 2) + i = (i==0x18) ? 3 : 4; + pgm = _consts + i + 3; + send = 1; + } + else if (STK_UNIVERSAL == cmd) + { + if (packet[0] == 0x30) + pgm = _consts + packet[2]; + send = 1; + } + else if (STK_READ_SIGN == cmd) + { + pgm = _consts; + send = 3; + } + else if (STK_LOAD_ADDRESS == cmd) + { + address = *((u16*)packet); // word address + address += address; + } + else if (STK_PROG_PAGE == cmd) + { + Program(CDC_RX, address, packet[1]); + } + else if (STK_READ_PAGE == cmd) + { + send = packet[1]; + pgm = (const u8*)address; + address += send; + } + + u16 countdown = 5000; + while (countdown-- > 10 && !USB_Available(CDC_RX)) + ; + int x = USB_Recv(CDC_RX); + if (x != -1 && x != ' ') break; + + USB_Send(CDC_TX, &_inSync, 1); + + if (send) + USB_Send(CDC_TX|TRANSFER_PGM, pgm, send); + + // Send ok + USB_Send(CDC_TX|TRANSFER_RELEASE, &_ok, 1); + + if ('Q' == cmd) + { + _delay_ms(100); + start_sketch(); + } } - _timeout = 0; - // Read params - Recv(CDC_RX,packet,len); - - // Send a response - u8 send = 0; - const u8* pgm = _consts+7; // 0 - if (STK_GET_PARAMETER == cmd) - { - u8 i = packet[0] - 0x80; - if (i > 2) - i = (i == 0x18) ? 3 : 4; // 0x80:HW_VER,0x81:SW_MAJOR,0x82:SW_MINOR,0x18:3 or 0 - pgm = _consts + i + 3; - send = 1; - } - - else if (STK_UNIVERSAL == cmd) + else { - if (packet[0] == 0x30) - pgm = _consts + packet[2]; // read signature - send = 1; + LEDPulse(); + _delay_us(100); + if (_timeout-- == 1) + start_sketch(); } - - // Read signature bytes - else if (STK_READ_SIGN == cmd) - { - pgm = _consts; - send = 3; - } - - else if (STK_LOAD_ADDRESS == cmd) - { - address = *((u16*)packet); // word addresses - address += address; - } - - else if (STK_PROG_PAGE == cmd) - { - Program(CDC_RX,address,packet[1]); - } - - else if (STK_READ_PAGE == cmd) - { - send = packet[1]; - pgm = (const u8*)address; - address += send; // not sure of this is required - } - - // Check sync - if (getch() != ' ') - break; - Transfer(CDC_TX,&_inSync,1); - - // Send result - if (send) - Transfer(CDC_TX|TRANSFER_PGM,pgm,send); // All from pgm memory - - // Send ok - Transfer(CDC_TX|TRANSFER_RELEASE,&_ok,1); - - if (cmd == 'Q') - break; } - _timeout = 500; // wait a moment before exiting the bootloader - may need to finish responding to 'Q' for example - _ejected = 1; } } - -// Nice breathing LED indicates we are in the firmware -u16 _pulse; -void LEDPulse() -{ - _pulse += 4; - u8 p = _pulse >> 9; - if (p > 63) - p = 127-p; - p += p; - if (((u8)_pulse) > p) - LED0; - else - LED1; -} - -void Reboot() -{ - TXLED0; // switch off the RX and TX LEDs before starting the user sketch - RXLED0; - UDCON = 1; // Detatch USB - UDIEN = 0; - asm volatile ( // Reset vector to run firmware - "clr r30\n" - "clr r31\n" - "ijmp\n" - ::); -} diff --git a/bootloaders/diskloader/src/Platform.h b/bootloaders/diskloader/src/Platform.h index 6acbf39..f1194a5 100644 --- a/bootloaders/diskloader/src/Platform.h +++ b/bootloaders/diskloader/src/Platform.h @@ -1,3 +1,9 @@ +/* + * Platform.h + */ + +#ifndef __PLATFORM_H__ +#define __PLATFORM_H__ #include <inttypes.h> #include <avr/io.h> @@ -11,39 +17,50 @@ #include <stdlib.h> #include <string.h> +#ifdef __cplusplus +extern "C"{ +#endif + typedef unsigned char u8; typedef unsigned short u16; typedef unsigned long u32; - -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) -#define DISABLE_JTAG() MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD); - #define USB_PID_LEONARDO 0x0034 #define USB_PID_MICRO 0x0035 #define USB_VID 0x2341 // arduino LLC vid #define USB_PID ARDUINO_MODEL_PID // passed in by Makefile - 0x0034 for Leonardo, 0x0035 for MIcro -#define OEM_NAME 'l','e','o','n','a','r','d','o' // 8 chars -#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG(); -#define LED0 PORTC &= ~(1<<7) -#define LED1 PORTC |= (1<<7) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) +#define min(a,b) ((a)<(b)?(a):(b)) -#define TRANSFER_PGM 0x80 -#define TRANSFER_RELEASE 0x40 -#define TRANSFER_ZERO 0x20 +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) +#define DISABLE_JTAG() MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD) -void Transfer(u8 ep, const u8* data, int len); -void Recv(u8 ep, u8* dst, u8 len); -void Program(u8 ep, u16 page, u8 count); +#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRE |= (1<<6); CPU_PRESCALE(0); DISABLE_JTAG(); // for XXX-series boards +//#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG(); // for non-XXX boards -#define CDC_ENABLED +// for XXX-series boards +#define TX_LED_OFF() PORTE |= (1<<6) +#define TX_LED_ON() PORTE &= ~(1<<6) +#define RX_LED_OFF() PORTB |= (1<<0) +#define RX_LED_ON() PORTB &= ~(1<<0) +#define L_LED_OFF() PORTC &= ~(1<<7) +#define L_LED_ON() PORTC |= (1<<7) +#define L_LED_TOGGLE() PORTC ^= (1<<7) -#include "USBCore.h" -#include "USBDesc.h" +// these for non-XXX boards +//#define LED0 PORTC &= ~(1<<7) +//#define LED1 PORTC |= (1<<7) +//#define TXLED0 PORTD |= (1<<5) +//#define TXLED1 PORTD &= ~(1<<5) +//#define RXLED0 PORTB |= (1<<0) +//#define RXLED1 PORTB &= ~(1<<0) +#ifdef __cplusplus +} /* extern "C"{ */ +#endif + +#include "USBDesc.h" +#include "USBCore.h" +#include "USBAPI.h" +#endif /* __PLATFORM_H__ */ diff --git a/bootloaders/diskloader/src/USBAPI.h b/bootloaders/diskloader/src/USBAPI.h new file mode 100644 index 0000000..f8d71c8 --- /dev/null +++ b/bootloaders/diskloader/src/USBAPI.h @@ -0,0 +1,64 @@ + + +#ifndef __USBAPI__ +#define __USBAPI__ + +#if defined(USBCON) + +//================================================================================ +//================================================================================ +// USB + +class USB_ +{ +public: + USB_(); + bool configured(); + + void attach(); + void detach(); // Serial port goes down too... + void poll(); +}; +extern USB_ USB; + +//================================================================================ +//================================================================================ +// Low level API + +typedef struct +{ + uint8_t bmRequestType; + uint8_t bRequest; + uint8_t wValueL; + uint8_t wValueH; + uint16_t wIndex; + uint16_t wLength; +} Setup; + +//================================================================================ +//================================================================================ +// CDC 'Driver' + +int CDC_GetInterface(uint8_t* interfaceNum); +int CDC_GetDescriptor(int i); +bool CDC_Setup(Setup& setup); + +//================================================================================ +//================================================================================ + +#define TRANSFER_PGM 0x80 +#define TRANSFER_RELEASE 0x40 +#define TRANSFER_ZERO 0x20 + +int USB_SendControl(uint8_t flags, const void* d, int len); +int USB_RecvControl(void* d, int len); + +uint8_t USB_Available(uint8_t ep); +int USB_Send(uint8_t ep, const void* data, int len); // blocking +int USB_Recv(uint8_t ep, void* data, int len); // non-blocking +void USB_Recv_block(u8 ep, u8* dst, int len); // blocking +int USB_Recv(uint8_t ep); // non-blocking +void USB_Flush(uint8_t ep); + +#endif +#endif /* if defined(USBCON) */ diff --git a/bootloaders/diskloader/src/USBCore.cpp b/bootloaders/diskloader/src/USBCore.cpp index ca74721..6518ae9 100644 --- a/bootloaders/diskloader/src/USBCore.cpp +++ b/bootloaders/diskloader/src/USBCore.cpp @@ -1,5 +1,4 @@ - /* Copyright (c) 2010, Peter Barrett ** ** Permission to use, copy, modify, and/or distribute this software for @@ -17,9 +16,10 @@ */ #include "Platform.h" +#include "USBAPI.h" +#include "USBDesc.h" -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT +#if defined(USBCON) #define EP_TYPE_CONTROL 0x00 #define EP_TYPE_BULK_IN 0x81 @@ -31,32 +31,50 @@ /** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ #define TX_RX_LED_PULSE_MS 100 -u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ -u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ - -void Reboot(); +volatile u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ +volatile u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ //================================================================== //================================================================== -typedef struct -{ - u32 dwDTERate; - u8 bCharFormat; - u8 bParityType; - u8 bDataBits; - u8 lineState; -} LineInfo; +extern const u16 STRING_LANGUAGE[] PROGMEM; +extern const u16 STRING_IPRODUCT[] PROGMEM; +extern const u16 STRING_IMANUFACTURER[] PROGMEM; +extern const DeviceDescriptor USB_DeviceDescriptor PROGMEM; +extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM; -static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; +const u16 STRING_LANGUAGE[2] = { + (3<<8) | (2+2), + 0x0409 // English +}; + +const u16 STRING_IPRODUCT[17] = { + (3<<8) | (2+2*16), +#if USB_PID == USB_PID_LEONARDO + 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o' +#elif USB_PID == USB_PID_MICRO + 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ',' ',' ' +#endif +}; + +const u16 STRING_IMANUFACTURER[12] = { + (3<<8) | (2+2*11), + 'A','r','d','u','i','n','o',' ','L','L','C' +}; + +#define DEVICE_CLASS 0x02 + +// DEVICE DESCRIPTOR +const DeviceDescriptor USB_DeviceDescriptor = + D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); + +const DeviceDescriptor USB_DeviceDescriptorA = + D_DEVICE(DEVICE_CLASS,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); //================================================================== //================================================================== -// 4 bytes of RAM -volatile u8 _usbConfiguration; -volatile u8 _ejected; -volatile u16 _timeout; +volatile u8 _usbConfiguration = 0; static inline void WaitIN(void) { @@ -86,34 +104,25 @@ static inline void ClearOUT(void) UEINTX = ~(1<<RXOUTI); } -static -void Send(volatile const u8* data, u8 count) -{ - TXLED1; // light the TX LED - TxLEDPulse = TX_RX_LED_PULSE_MS; - while (count--) - UEDATX = *data++; -} - void Recv(volatile u8* data, u8 count) { - RXLED1; // light the RX LED - RxLEDPulse = TX_RX_LED_PULSE_MS; while (count--) *data++ = UEDATX; + + RX_LED_ON(); + RxLEDPulse = TX_RX_LED_PULSE_MS; } static inline u8 Recv8() { - RXLED1; // light the RX LED + RX_LED_ON(); RxLEDPulse = TX_RX_LED_PULSE_MS; - return UEDATX; + + return UEDATX; } static inline void Send8(u8 d) { - TXLED1; // light the TX LED - TxLEDPulse = TX_RX_LED_PULSE_MS; UEDATX = d; } @@ -175,48 +184,37 @@ static inline u8 FrameNumber() //================================================================== //================================================================== -#define EP_SINGLE_64 0x32 // EP0 -#define EP_DOUBLE_64 0x36 // Other endpoints - -static void InitEP(u8 index, u8 type, u8 size) -{ - UENUM = index; - UECONX = 1; - UECFG0X = type; - UECFG1X = size; -} - -// API -void USBInit(void) -{ - _timeout = 0; - _usbConfiguration = 0; - _ejected = 0; - - UHWCON = 0x01; // power internal reg (don't need this?) - USBCON = (1<<USBE)|(1<<FRZCLK); // clock frozen, usb enabled - PLLCSR = 0x12; // Need 16 MHz xtal - while (!(PLLCSR & (1<<PLOCK))) // wait for lock pll - ; - USBCON = ((1<<USBE)|(1<<OTGPADE)); // start USB clock - UDCON = 0; // enable attach resistor -} - u8 USBGetConfiguration(void) { return _usbConfiguration; } -u8 HasData(u8 ep) +#define USB_RECV_TIMEOUT +class LockEP { - SetEP(ep); - return ReadWriteAllowed(); // count in fifo + u8 _sreg; +public: + LockEP(u8 ep) : _sreg(SREG) + { + cli(); + SetEP(ep & 7); + } + ~LockEP() + { + SREG = _sreg; + } +}; + +// Number of bytes, assumes a rx endpoint +u8 USB_Available(u8 ep) +{ + LockEP lock(ep); + return FifoByteCount(); } -int USBGetChar(); -void Recv(u8 ep, u8* dst, u8 len) +void USB_Recv_block(u8 ep, u8* dst, int len) { - SetEP(ep); + LockEP lock(ep); while (len--) { while (!ReadWriteAllowed()) @@ -224,47 +222,119 @@ void Recv(u8 ep, u8* dst, u8 len) *dst++ = Recv8(); if (!ReadWriteAllowed()) // release empty buffer ReleaseRX(); - } + } } -// Transmit a packet to endpoint -void Transfer(u8 ep, const u8* data, int len) +// Non Blocking receive +// Return number of bytes read +int USB_Recv(u8 ep, void* d, int len) { - u8 zero = ep & TRANSFER_ZERO; - SetEP(ep & 7); - while (len--) - { - while (!ReadWriteAllowed()) - ; // TODO Check for STALL etc + if (!_usbConfiguration || len < 0) + return -1; + + LockEP lock(ep); + u8 n = FifoByteCount(); + len = min(n,len); + n = len; + u8* dst = (u8*)d; + while (n--) + *dst++ = Recv8(); + if (len && !FifoByteCount()) // release empty buffer + ReleaseRX(); + + return len; +} - u8 d = (ep & TRANSFER_PGM) ? pgm_read_byte(data) : data[0]; - data++; - if (zero) - d = 0; - Send8(d); +// Recv 1 byte if ready +int USB_Recv(u8 ep) +{ + u8 c; + if (USB_Recv(ep,&c,1) != 1) + return -1; + return c; +} + +// Space in send EP +u8 USB_SendSpace(u8 ep) +{ + LockEP lock(ep); + if (!ReadWriteAllowed()) + return 0; + return 64 - FifoByteCount(); +} + +// Blocking Send of data to an endpoint +int USB_Send(u8 ep, const void* d, int len) +{ + if (!_usbConfiguration) + return -1; + + int r = len; + const u8* data = (const u8*)d; + while (len) + { + u8 n = USB_SendSpace(ep); + if (n == 0) + { + _delay_ms(1); + continue; + } - if (!ReadWriteAllowed()) - ReleaseTX(); + if (n > len) + n = len; + len -= n; + { + LockEP lock(ep); + if (ep & TRANSFER_ZERO) + { + while (n--) + Send8(0); + } + else if (ep & TRANSFER_PGM) + { + while (n--) + Send8(pgm_read_byte(data++)); + } + else + { + while (n--) + Send8(*data++); + } + if (!ReadWriteAllowed() || ((len == 0) && (ep & TRANSFER_RELEASE))) // Release full buffer + ReleaseTX(); + } } if (ep & TRANSFER_RELEASE) ReleaseTX(); + + TX_LED_ON(); + TxLEDPulse = TX_RX_LED_PULSE_MS; + return r; } extern const u8 _initEndpoints[] PROGMEM; const u8 _initEndpoints[] = { 0, - -#ifdef CDC_ENABLED EP_TYPE_INTERRUPT_IN, // CDC_ENDPOINT_ACM EP_TYPE_BULK_OUT, // CDC_ENDPOINT_OUT EP_TYPE_BULK_IN, // CDC_ENDPOINT_IN -#endif - - EP_TYPE_INTERRUPT_IN, // HID_ENDPOINT_INT }; -static void InitEndpoints() +#define EP_SINGLE_64 0x32 // EP0 +#define EP_DOUBLE_64 0x36 // Other endpoints + +static +void InitEP(u8 index, u8 type, u8 size) +{ + UENUM = index; + UECONX = 1; + UECFG0X = type; + UECFG1X = size; +} + +static +void InitEndpoints() { for (u8 i = 1; i < sizeof(_initEndpoints); i++) { @@ -277,99 +347,113 @@ static void InitEndpoints() UERST = 0; } -typedef struct +// Handle CLASS_INTERFACE requests +static +bool ClassInterfaceRequest(Setup& setup) { - u8 bmRequestType; - u8 bRequest; - u8 wValueL; - u8 wValueH; - u16 wIndex; - u16 wLength; -} Setup; -Setup _setup; + u8 i = setup.wIndex; -//bool USBHook(Setup& setup) -bool USBHook() -{ - Setup& setup = _setup; - u8 r = setup.bRequest; + if (CDC_ACM_INTERFACE == i) + return CDC_Setup(setup); - // CDC Requests - if (CDC_GET_LINE_CODING == r) - { - Send((const volatile u8*)&_usbLineInfo,7); - } + return false; +} + +int _cmark; +int _cend; +void InitControl(int end) +{ + SetEP(0); + _cmark = 0; + _cend = end; +} - else if (CDC_SET_LINE_CODING == r) +static +bool SendControl(u8 d) +{ + if (_cmark < _cend) { - WaitOUT(); - Recv((volatile u8*)&_usbLineInfo,7); - ClearOUT(); + if (!WaitForINOrOUT()) + return false; + Send8(d); + if (!((_cmark + 1) & 0x3F)) + ClearIN(); // Fifo is full, release this packet } + _cmark++; + return true; +}; - else if (CDC_SET_CONTROL_LINE_STATE == r) +// Clipped by _cmark/_cend +int USB_SendControl(u8 flags, const void* d, int len) +{ + int sent = len; + const u8* data = (const u8*)d; + bool pgm = flags & TRANSFER_PGM; + while (len--) { - _usbLineInfo.lineState = setup.wValueL; + u8 c = pgm ? pgm_read_byte(data++) : *data++; + if (!SendControl(c)) + return -1; } - - return true; + return sent; } -extern const u8 _rawHID[] PROGMEM; -#define LSB(_x) ((_x) & 0xFF) -#define MSB(_x) ((_x) >> 8) - -#define RAWHID_USAGE_PAGE 0xFFC0 -#define RAWHID_USAGE 0x0C00 -#define RAWHID_TX_SIZE 64 -#define RAWHID_RX_SIZE 64 - -const u8 _rawHID[] = +// Does not timeout or cross fifo boundaries +// Will only work for transfers <= 64 bytes +// TODO +int USB_RecvControl(void* d, int len) { - // RAW HID - 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 - 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), + WaitOUT(); + Recv((u8*)d,len); + ClearOUT(); + return len; +} - 0xA1, 0x01, // Collection 0x01 - 0x85, 0x03, // REPORT_ID (3) - 0x75, 0x08, // report size = 8 bits - 0x15, 0x00, // logical minimum = 0 - 0x26, 0xFF, 0x00, // logical maximum = 255 +int SendInterfaces() +{ + int total = 0; + u8 interfaces = 0; + total = CDC_GetInterface(&interfaces); + return interfaces; +} - 0x95, 64, // report count TX - 0x09, 0x01, // usage - 0x81, 0x02, // Input (array) +// Construct a dynamic configuration descriptor +// This really needs dynamic endpoint allocation etc +// TODO +static +bool SendConfiguration(int maxlen) +{ + // Count and measure interfaces + InitControl(0); + int interfaces = SendInterfaces(); + ConfigDescriptor config = D_CONFIG(_cmark + sizeof(ConfigDescriptor),interfaces); - 0x95, 64, // report count RX - 0x09, 0x02, // usage - 0x91, 0x02, // Output (array) - 0xC0 // end collection -}; + // Now send them + InitControl(maxlen); + USB_SendControl(0,&config,sizeof(ConfigDescriptor)); + SendInterfaces(); + return true; +} u8 _cdcComposite = 0; -bool SendDescriptor() +static +bool SendDescriptor(Setup& setup) { - Setup& setup = _setup; + u8 t = setup.wValueH; + if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t) + return SendConfiguration(setup.wLength); + + InitControl(setup.wLength); + u8 desc_length = 0; const u8* desc_addr = 0; - - u8 t = setup.wValueH; - if (0x22 == t) - { - desc_addr = _rawHID; - desc_length = sizeof(desc_length); - } else if (USB_DEVICE_DESCRIPTOR_TYPE == t) + if (USB_DEVICE_DESCRIPTOR_TYPE == t) { if (setup.wLength == 8) _cdcComposite = 1; desc_addr = _cdcComposite ? (const u8*)&USB_DeviceDescriptorA : (const u8*)&USB_DeviceDescriptor; } - else if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t) - { - desc_addr = (const u8*)&USB_ConfigDescriptor; - desc_length = sizeof(USB_ConfigDescriptor); - } else if (USB_STRING_DESCRIPTOR_TYPE == t) { if (setup.wValueL == 0) @@ -380,81 +464,106 @@ bool SendDescriptor() desc_addr = (const u8*)&STRING_IMANUFACTURER; else return false; - } else - return false; + } + if (desc_addr == 0) + return false; if (desc_length == 0) desc_length = pgm_read_byte(desc_addr); - if ((u8)setup.wLength < desc_length) // bit of a cheat limiting to 255 bytes TODO (saved 8 bytes) - desc_length = (u8)setup.wLength; - - // Send descriptor - // EP0 is 64 bytes long - // RWAL and FIFOCON don't work on EP0 - u8 n = 0; - do - { - if (!WaitForINOrOUT()) - return false; - Send8(pgm_read_byte(&desc_addr[n++])); - u8 clr = n & 0x3F; - if (!clr) - ClearIN(); // Fifo is full, release this packet - } while (n < desc_length); + + USB_SendControl(TRANSFER_PGM,desc_addr,desc_length); return true; } -void USBSetupInterrupt() +// Endpoint 0 interrupt +ISR(USB_COM_vect) { SetEP(0); if (!ReceivedSetupInt()) return; - Setup& setup = _setup; // global saves ~30 bytes + Setup setup; Recv((u8*)&setup,8); ClearSetupInt(); - if (setup.bmRequestType & DEVICETOHOST) + u8 requestType = setup.bmRequestType; + if (requestType & REQUEST_DEVICETOHOST) WaitIN(); else ClearIN(); bool ok = true; - u8 r = setup.bRequest; - if (SET_ADDRESS == r) - { - WaitIN(); - UDADDR = setup.wValueL | (1<<ADDEN); - } - else if (SET_CONFIGURATION == r) - { - _usbConfiguration = setup.wValueL; - InitEndpoints(); - } - else if (GET_CONFIGURATION == r) - { - Send8(_usbConfiguration); - } - else if (GET_STATUS == r) + if (REQUEST_STANDARD == (requestType & REQUEST_TYPE)) { - Send8(0); // All good as far as I know - } - else if (GET_DESCRIPTOR == r) - { - ok = SendDescriptor(); + // Standard Requests + u8 r = setup.bRequest; + if (GET_STATUS == r) + { + Send8(0); // TODO + Send8(0); + } + else if (CLEAR_FEATURE == r) + { + } + else if (SET_FEATURE == r) + { + } + else if (SET_ADDRESS == r) + { + WaitIN(); + UDADDR = setup.wValueL | (1<<ADDEN); + } + else if (GET_DESCRIPTOR == r) + { + ok = SendDescriptor(setup); + } + else if (SET_DESCRIPTOR == r) + { + ok = false; + } + else if (GET_CONFIGURATION == r) + { + Send8(1); + } + else if (SET_CONFIGURATION == r) + { + if (REQUEST_DEVICE == (requestType & REQUEST_RECIPIENT)) + { + InitEndpoints(); + _usbConfiguration = setup.wValueL; + } else + ok = false; + } + else if (GET_INTERFACE == r) + { + } + else if (SET_INTERFACE == r) + { + } } else { - ok = USBHook(); + InitControl(setup.wLength); // Max length of transfer + ok = ClassInterfaceRequest(setup); } if (ok) ClearIN(); else + { Stall(); + } } -void USBGeneralInterrupt() +void USB_Flush(u8 ep) +{ + SetEP(ep); + if (FifoByteCount()) + ReleaseTX(); +} + +// General interrupt +ISR(USB_GEN_vect) { u8 udint = UDINT; UDINT = 0; @@ -464,45 +573,67 @@ void USBGeneralInterrupt() { InitEP(0,EP_TYPE_CONTROL,EP_SINGLE_64); // init ep0 _usbConfiguration = 0; // not configured yet + UEIENX = 1 << RXSTPE; // Enable interrupts for ep0 } // Start of Frame - happens every millisecond so we use it for TX and RX LED one-shot timing, too if (udint & (1<<SOFI)) { + USB_Flush(CDC_TX); // Send a tx frame if found + // check whether the one-shot period has elapsed. if so, turn off the LED if (TxLEDPulse && !(--TxLEDPulse)) - TXLED0; + TX_LED_OFF(); if (RxLEDPulse && !(--RxLEDPulse)) - RXLED0; - - if (!_ejected) - _timeout = 0; + RX_LED_OFF(); } } -void LEDPulse(); -int USBGetChar() +// VBUS or counting frames +// Any frame counting? +u8 USBConnected() { - for(;;) - { - USBSetupInterrupt(); - USBGeneralInterrupt(); + u8 f = UDFNUML; +// delay(3); + _delay_ms(3); + return f != UDFNUML; +} - // Read a char - if (HasData(CDC_RX)) - { - u8 c = Recv8(); - if (!ReadWriteAllowed()) - ReleaseRX(); - return c; - } - - if (!--_timeout) { - Reboot(); // USB not connected, run firmware - } - - _delay_us(100); // stretch out the bootloader period to about 5 seconds after enumeration - LEDPulse(); - } - return -1; +//======================================================================= +//======================================================================= + +USB_ USB; + +USB_::USB_() +{ } + +void USB_::attach() +{ + _usbConfiguration = 0; + UHWCON = 0x01; // power internal reg + USBCON = (1<<USBE)|(1<<FRZCLK); // clock frozen, usb enabled + PLLCSR = 0x12; // Need 16 MHz xtal + while (!(PLLCSR & (1<<PLOCK))) // wait for lock pll + ; + USBCON = ((1<<USBE)|(1<<OTGPADE)); // start USB clock + UDIEN = (1<<EORSTE)|(1<<SOFE); // Enable interrupts for EOR (End of Reset) and SOF (start of frame) + UDCON = 0; // enable attach resistor +} + +void USB_::detach() +{ +} + +// Check for interrupts +// TODO: VBUS detection +bool USB_::configured() +{ + return _usbConfiguration; +} + +void USB_::poll() +{ +} + +#endif /* if defined(USBCON) */ diff --git a/bootloaders/diskloader/src/USBCore.h b/bootloaders/diskloader/src/USBCore.h index 537c0ec..511b57c 100644 --- a/bootloaders/diskloader/src/USBCore.h +++ b/bootloaders/diskloader/src/USBCore.h @@ -18,29 +18,42 @@ #ifndef __USBCORE_H__ #define __USBCORE_H__ +// Standard requests #define GET_STATUS 0 #define CLEAR_FEATURE 1 #define SET_FEATURE 3 #define SET_ADDRESS 5 #define GET_DESCRIPTOR 6 +#define SET_DESCRIPTOR 7 #define GET_CONFIGURATION 8 #define SET_CONFIGURATION 9 #define GET_INTERFACE 10 #define SET_INTERFACE 11 + // bmRequestType -#define HOSTTODEVICE 0x00 -#define DEVICETOHOST 0x80 -#define STANDARD 0x00 -#define CLASS 0x20 -#define VENDOR 0x40 -#define DEVICE 0x00 -#define INTERFACE 0x01 -#define ENDPOINT 0x02 -#define OTHER 0x03 - -#define CDC_SET_LINE_CODING 0x20 -#define CDC_GET_LINE_CODING 0x21 +#define REQUEST_HOSTTODEVICE 0x00 +#define REQUEST_DEVICETOHOST 0x80 +#define REQUEST_DIRECTION 0x80 + +#define REQUEST_STANDARD 0x00 +#define REQUEST_CLASS 0x20 +#define REQUEST_VENDOR 0x40 +#define REQUEST_TYPE 0x60 + +#define REQUEST_DEVICE 0x00 +#define REQUEST_INTERFACE 0x01 +#define REQUEST_ENDPOINT 0x02 +#define REQUEST_OTHER 0x03 +#define REQUEST_RECIPIENT 0x03 + +#define REQUEST_DEVICETOHOST_CLASS_INTERFACE (REQUEST_DEVICETOHOST + REQUEST_CLASS + REQUEST_INTERFACE) +#define REQUEST_HOSTTODEVICE_CLASS_INTERFACE (REQUEST_HOSTTODEVICE + REQUEST_CLASS + REQUEST_INTERFACE) + +// Class requests + +#define CDC_SET_LINE_CODING 0x20 +#define CDC_GET_LINE_CODING 0x21 #define CDC_SET_CONTROL_LINE_STATE 0x22 // Descriptors @@ -94,7 +107,6 @@ #define CDC_CS_ENDPOINT 0x25 #define CDC_DATA_INTERFACE_CLASS 0x0A - // Device typedef struct { u8 len; // 18 @@ -186,14 +198,32 @@ typedef struct typedef struct { + u8 len; + u8 dtype; // 0x24 + u8 subtype; // 1 + u8 bmCapabilities; + u8 bDataInterface; +} CMFunctionalDescriptor; + +typedef struct +{ + u8 len; + u8 dtype; // 0x24 + u8 subtype; // 1 + u8 bmCapabilities; +} ACMFunctionalDescriptor; + +typedef struct +{ + // IAD IADDescriptor iad; // Only needed on compound device // Control InterfaceDescriptor cif; // CDCCSInterfaceDescriptor header; - CDCCSInterfaceDescriptor callManagement; - CDCCSInterfaceDescriptor4 controlManagement; - CDCCSInterfaceDescriptor functionalDescriptor; + CMFunctionalDescriptor callManagement; // Call Management + ACMFunctionalDescriptor controlManagement; // ACM + CDCCSInterfaceDescriptor functionalDescriptor; // CDC_UNION EndpointDescriptor cifin; // Data @@ -202,31 +232,11 @@ typedef struct EndpointDescriptor out; } CDCDescriptor; -typedef struct -{ - u8 len; // 9 - u8 dtype; // 0x21 - u8 addr; - u8 versionL; // 0x101 - u8 versionH; // 0x101 - u8 country; - u8 desctype; // 0x22 report - u8 descLenL; - u8 descLenH; -} HIDDescDescriptor; - -typedef struct -{ - InterfaceDescriptor hid; - HIDDescDescriptor desc; - EndpointDescriptor in; -} HIDDescriptor; - #define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \ { 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs } #define D_CONFIG(_totalLength,_interfaces) \ - { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(100) } + { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(500) } #define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \ { 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 } @@ -237,10 +247,8 @@ typedef struct #define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \ { 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 } -#define D_HIDREPORT(_descriptorLength) \ - { 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 } - #define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 } #define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 } + #endif
\ No newline at end of file diff --git a/bootloaders/diskloader/src/USBDesc.cpp b/bootloaders/diskloader/src/USBDesc.cpp deleted file mode 100644 index c8ea9c6..0000000 --- a/bootloaders/diskloader/src/USBDesc.cpp +++ /dev/null @@ -1,82 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" - -//==================================================================================================== -//==================================================================================================== -// Actual device descriptors - -const u16 STRING_LANGUAGE[2] = { - (3<<8) | (2+2), - 0x0409 // English -}; - - -const u16 STRING_IPRODUCT[28] = { - (3<<8) | (2+2*27), -#if USB_PID == USB_PID_LEONARDO - 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o',' ','b','o','o','t','l','o','a','d','e','r' -#elif USB_PID == USB_PID_MICRO - 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ','b','o','o','t','l','o','a','d','e','r',' ',' ',' ' -#endif -}; - -const u16 STRING_IMANUFACTURER[12] = { - (3<<8) | (2+2*11), - 'A','r','d','u','i','n','o',' ','L','L','C' -}; - - -//#ifdef CDC_ENABLED -DeviceDescriptor USB_DeviceDescriptorA = D_DEVICE(0X02,0X00,0X00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); -//#else -DeviceDescriptor USB_DeviceDescriptor = D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); -//#endif - -Config USB_ConfigDescriptor = -{ - D_CONFIG(sizeof(Config),INTERFACE_COUNT), - -#ifdef CDC_ENABLED - // CDC - { - D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), - - // CDC communication interface - D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), - D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) - D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management - D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,2), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported - D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), - - // CDC data interface - D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), - D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) - }, -#endif - // HID - { - D_INTERFACE(HID_INTERFACE,1,3,0,0), - D_HIDREPORT(30), - D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x40) - } -}; - diff --git a/bootloaders/diskloader/src/USBDesc.h b/bootloaders/diskloader/src/USBDesc.h index 094dba5..588a40c 100644 --- a/bootloaders/diskloader/src/USBDesc.h +++ b/bootloaders/diskloader/src/USBDesc.h @@ -16,48 +16,19 @@ ** SOFTWARE. */ - -#ifdef CDC_ENABLED +#define CDC_INTERFACE_COUNT 2 +#define CDC_ENPOINT_COUNT 3 #define CDC_ACM_INTERFACE 0 // CDC ACM #define CDC_DATA_INTERFACE 1 // CDC Data -#define CDC_ENDPOINT_ACM 1 -#define CDC_ENDPOINT_OUT 2 -#define CDC_ENDPOINT_IN 3 - -#define HID_INTERFACE 2 // HID Interface -#define HID_ENDPOINT_INT 4 - -#define INTERFACE_COUNT 3 // 2 for cdc + 1 for hid - -#else - -#define HID_INTERFACE 2 // HID Interface -#define HID_ENDPOINT_INT 4 - -#define INTERFACE_COUNT 1 // 1 for hid +#define CDC_FIRST_ENDPOINT 1 +#define CDC_ENDPOINT_ACM (CDC_FIRST_ENDPOINT) // CDC First +#define CDC_ENDPOINT_OUT (CDC_FIRST_ENDPOINT+1) +#define CDC_ENDPOINT_IN (CDC_FIRST_ENDPOINT+2) -#endif - -typedef struct -{ - ConfigDescriptor config; -#ifdef CDC_ENABLED - CDCDescriptor cdc; -#endif - HIDDescriptor hid; -} Config; - -extern Config USB_ConfigDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptorA PROGMEM; - -extern const u16 STRING_LANGUAGE[2] PROGMEM; -extern const u16 STRING_IPRODUCT[28] PROGMEM; -extern const u16 STRING_IMANUFACTURER[12] PROGMEM; +#define CDC_RX CDC_ENDPOINT_OUT +#define CDC_TX CDC_ENDPOINT_IN #define IMANUFACTURER 1 #define IPRODUCT 2 -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT
\ No newline at end of file |