aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--boards.txt49
-rw-r--r--bootloaders/caterina/Caterina-Yun.hex1025
-rw-r--r--cores/arduino/IPAddress.h1
-rw-r--r--libraries/Bridge/Bridge.cpp229
-rw-r--r--libraries/Bridge/Bridge.h97
-rw-r--r--libraries/Bridge/Console.cpp153
-rw-r--r--libraries/Bridge/Console.h69
-rw-r--r--libraries/Bridge/FileIO.cpp250
-rw-r--r--libraries/Bridge/FileIO.h103
-rw-r--r--libraries/Bridge/HttpClient.cpp53
-rw-r--r--libraries/Bridge/HttpClient.h36
-rw-r--r--libraries/Bridge/Mailbox.cpp56
-rw-r--r--libraries/Bridge/Mailbox.h53
-rw-r--r--libraries/Bridge/Process.cpp142
-rw-r--r--libraries/Bridge/Process.h69
-rw-r--r--libraries/Bridge/YunClient.cpp167
-rw-r--r--libraries/Bridge/YunClient.h68
-rw-r--r--libraries/Bridge/YunServer.cpp54
-rw-r--r--libraries/Bridge/YunServer.h47
-rw-r--r--libraries/Bridge/examples/Bridge/Bridge.ino175
-rw-r--r--libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino94
-rw-r--r--libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino62
-rw-r--r--libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino56
-rw-r--r--libraries/Bridge/examples/Datalogger/Datalogger.ino99
-rw-r--r--libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino82
-rw-r--r--libraries/Bridge/examples/HttpClient/HttpClient.ino26
-rw-r--r--libraries/Bridge/examples/Process/Process.ino70
-rw-r--r--libraries/Bridge/examples/ShellCommands/ShellCommands.ino53
-rw-r--r--libraries/Bridge/examples/SpacebrewYun/input_output/input_output.ino98
-rw-r--r--libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino443
-rw-r--r--libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h5
-rw-r--r--libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino115
-rw-r--r--libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h4
-rw-r--r--libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino173
-rw-r--r--libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h4
-rw-r--r--libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino138
-rw-r--r--libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h4
-rw-r--r--libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino137
-rw-r--r--libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h4
-rw-r--r--libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino154
-rw-r--r--libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h5
-rw-r--r--libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino178
-rw-r--r--libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h5
-rw-r--r--libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h5
-rw-r--r--libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino171
-rw-r--r--libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h5
-rw-r--r--libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino132
-rw-r--r--libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h5
-rw-r--r--libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino208
-rw-r--r--libraries/Bridge/examples/TemperatureWebPanel/.DS_Storebin0 -> 6148 bytes
-rw-r--r--libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino121
-rwxr-xr-xlibraries/Bridge/examples/TemperatureWebPanel/www/index.html16
-rwxr-xr-xlibraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js2
-rw-r--r--libraries/Bridge/examples/TimeCheck/TimeCheck.ino82
-rw-r--r--libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino50
-rw-r--r--libraries/Bridge/examples/XivelyClient/XivelyClient.ino110
-rw-r--r--libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino78
-rw-r--r--libraries/Bridge/keywords.txt85
-rw-r--r--libraries/SpacebrewYun/SpacebrewYun.cpp356
-rw-r--r--libraries/SpacebrewYun/SpacebrewYun.h122
-rw-r--r--libraries/SpacebrewYun/keywords.txt15
-rw-r--r--libraries/Temboo/Temboo.cpp64
-rw-r--r--libraries/Temboo/Temboo.h44
63 files changed, 6576 insertions, 0 deletions
diff --git a/boards.txt b/boards.txt
index ebcbf21..a68e840 100644
--- a/boards.txt
+++ b/boards.txt
@@ -4,7 +4,44 @@ menu.cpu=Processor
##############################################################
+yun.name=Arduino Yún
+yun.upload.via_ssh=true
+
+yun.vid.0=0x2341
+yun.pid.0=0x0041
+yun.vid.1=0x2341
+yun.pid.1=0x8041
+yun.upload.tool=avrdude
+yun.upload.protocol=avr109
+yun.upload.maximum_size=28672
+yun.upload.maximum_data_size=2560
+yun.upload.speed=57600
+yun.upload.disable_flushing=true
+yun.upload.use_1200bps_touch=true
+yun.upload.wait_for_upload_port=true
+
+yun.bootloader.tool=avrdude
+yun.bootloader.low_fuses=0xff
+yun.bootloader.high_fuses=0xd8
+yun.bootloader.extended_fuses=0xcb
+yun.bootloader.file=caterina/Caterina-Yun.hex
+yun.bootloader.unlock_bits=0x3F
+yun.bootloader.lock_bits=0x2F
+
+yun.build.mcu=atmega32u4
+yun.build.f_cpu=16000000L
+yun.build.vid=0x2341
+yun.build.pid=0x8041
+yun.build.board=AVR_LEONARDO
+yun.build.core=arduino
+yun.build.variant=leonardo
+yun.build.extra_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid}
+
+##############################################################
+
uno.name=Arduino Uno
+uno.vid.0=0x2341
+uno.pid.0=0x0043
uno.upload.tool=avrdude
uno.upload.protocol=arduino
uno.upload.maximum_size=32256
@@ -119,6 +156,10 @@ nano.menu.cpu.atmega168.build.mcu=atmega168
##############################################################
mega2560.name=Arduino Mega 2560 or Mega ADK
+mega2560.vid.0=0x2341
+mega2560.pid.0=0x0044
+mega2560.vid.1=0x2341
+mega2560.pid.1=0x003f
mega2560.cpu=2560 or ADK
mega2560.upload.tool=avrdude
@@ -167,6 +208,10 @@ mega.build.variant=mega
##############################################################
leonardo.name=Arduino Leonardo
+leonardo.vid.0=0x2341
+leonardo.pid.0=0x0036
+leonardo.vid.1=0x2341
+leonardo.pid.1=0x8036
leonardo.upload.tool=avrdude
leonardo.upload.protocol=avr109
leonardo.upload.maximum_size=28672
@@ -227,6 +272,10 @@ micro.build.extra_flags={build.usb_flags}
##############################################################
esplora.name=Arduino Esplora
+esplora.vid.0=0x2341
+esplora.pid.0=0x003c
+esplora.vid.1=0x2341
+esplora.pid.1=0x803c
esplora.upload.tool=avrdude
esplora.upload.protocol=avr109
esplora.upload.maximum_size=28672
diff --git a/bootloaders/caterina/Caterina-Yun.hex b/bootloaders/caterina/Caterina-Yun.hex
new file mode 100644
index 0000000..1d76eb0
--- /dev/null
+++ b/bootloaders/caterina/Caterina-Yun.hex
@@ -0,0 +1,1025 @@
+:200000000C9475010C949D010C949D010C949D010C949D010C949D010C949D010C949D0118
+:200020000C949D010C949D010C940C050C9493050C949D010C949D010C949D010C949D0163
+:200040000C949D010C949D010C949D010C949D010C949D010C949D010C949D010C94BC0191
+:200060000C949D010C949D010C949D010C949D010C949D010C949D010C949D010C949D0190
+:200080000C949D010C949D010C949D010C949D010C949D010C949D010C949D010C949D0170
+:2000A0000C949D010C949D010C949D0100000000240027002A002D0030000000000025008F
+:2000C00028002B002E003100000000002300260029002C002F00040404040403040502027D
+:2000E0000202040302020202060606060606040402020204040802011040804010204080A8
+:200100004080080204018040201002011080102040400000000200080E0000030401000BB2
+:2001200000000000000000000000000000000000070605040100080A0B0C0D090403090455
+:200140002203410072006400750069006E006F002000590075006E002000200020002000CC
+:2001600020001803410072006400750069006E006F0020004C004C00430012010002000062
+:2001800000404123418000010102000112010002020000404123418000010102000100C1B3
+:2001A0008081C1080B000202020100090400000102020000052400100105240101010424C3
+:2001C000020605240600010705810310004009040100020A00000007050202400000070591
+:2001E000830240000005010902A1010901A100850105091901290315002501950375018138
+:200200000295017505810305010930093109381581257F750895038106C0C005010906A182
+:20022000018502050719E029E7150025017501950881029501750881039506750815002567
+:20024000650507190029658100C009040200010300000009210101000122650007058403EB
+:2002600040000100000000000000002A2B28000000000000000000000000000000000000C0
+:200280000000002C9EB4A0A1A2A434A6A7A5AE362D3738271E1F20212223242526B333B6BE
+:2002A0002EB7B89F8485868788898A8B8C8D8E8F909192939495969798999A9B9C9D2F31F5
+:2002C00030A3AD350405060708090A0B0C0D0E0F101112131415161718191A1B1C1DAFB15C
+:2002E000B0B50000480426072B0811241FBECFEFDAE0DEBFCDBF11E0A0E0B1E0EEECF2E18B
+:2003000002C005900D92AC32B107D9F711E0ACE2B1E001C01D92AD39B107E1F712E0CAEEE1
+:20032000D2E004C02297FE010E946109C43ED107C9F70E9482030C9465090C940000809103
+:20034000000161E00E944F0368EE73E080E090E00E945A028091000160E00E944F0368EE54
+:2003600073E080E090E00E945A0208958091000161E00E94C20208951F920F920FB60F92B1
+:2003800011242F933F938F939F93AF93BF938091300190913101A0913201B091330130917D
+:2003A00034010196A11DB11D232F2D5F2D3720F02D570196A11DB11D2093340180933001C0
+:2003C00090933101A0933201B093330180912C0190912D01A0912E01B0912F010196A11D38
+:2003E000B11D80932C0190932D01A0932E01B0932F01BF91AF919F918F913F912F910F90BA
+:200400000FBE0F901F901895789484B5826084BD84B5816084BD85B5826085BD85B58160D8
+:2004200085BDEEE6F0E0808181608083E1E8F0E01082808182608083808181608083E0E833
+:20044000F0E0808181608083E1E9F0E0808182608083808181608083E0E9F0E08081816007
+:200460008083E1ECF0E0808184608083808182608083808181608083E3ECF0E080818160A8
+:200480008083E0ECF0E0808182608083E2ECF0E0808181608083EAE7F0E0808184608083CB
+:2004A0008081826080838081816080838081806880830895EF92FF920F931F93CF93DF93AE
+:2004C0007B018C013FB7F89480912C0190912D01A0912E01B0912F0126B5A89B05C02F3FE2
+:2004E00019F00196A11DB11D3FBFBA2FA92F982F8827820F911DA11DB11D52E0880F991F4F
+:20050000AA1FBB1F5A95D1F7EC0130C00E9434093FB7F89480912C0190912D01A0912E0156
+:20052000B0912F0126B5A89B05C02F3F19F00196A11DB11D3FBFBA2FA92F982F8827820F07
+:20054000911DA11DB11D32E0880F991FAA1FBB1F3A95D1F78C1B9D0B885E9340B8F2089478
+:20056000E108F10801091109C851DC4FE114F1040105110559F6DF91CF911F910F91FF902D
+:20058000EF900895CF93DF93482F50E0CA018C509F4FFC0134914A525F4FFA018491882368
+:2005A00069F190E0880F991FFC01E455FF4FA591B491FC01E654FF4FC591D491662351F415
+:2005C0002FB7F8948C91932F909589238C93888189230BC0623061F42FB7F8948C91932F22
+:2005E000909589238C938881832B88832FBF06C09FB7F8948C91832B8C939FBFDF91CF919B
+:200600000895883071F1893068F4823031F1833020F4813009F042C01DC0833089F084300A
+:20062000E9F512C08B3059F18C3028F48930E9F08A30A1F51EC08C3031F18E3079F529C07A
+:20064000809180008F7703C0809180008F7D80938000089584B58F7702C084B58F7D84BDEC
+:200660000895809190008F7707C0809190008F7D03C080919000877F809390000895809107
+:20068000C0008F7703C08091C0008F7D8093C00008958091C200877F8093C2000895FF92A8
+:2006A0000F931F93F62E482F50E0CA018E5E9E4FFC012491CA018C509F4FFC0114914A52F2
+:2006C0005F4FFA0104910023C9F0222319F0822F0E940103E02FF0E0EE0FFF1FE654FF4FD9
+:2006E000A591B4919FB7F894FF2021F48C911095812302C08C91812B8C939FBF1F910F91AB
+:20070000FF900895CF93DF930E9404028DE391E00E9449040E94B601C0E0D0E00E949F0176
+:200720002097E1F30E940000F9CF282F809137018823C1F057FF1AC015C0289890933601A9
+:200740008091F1008193E217F307B9F74115510539F08091F200882319F48BE68093E800E4
+:20076000AFBF02C04FEF5FEFCA010895AFB7F89427702093E9008091F200282F30E024178B
+:2007800035070CF4A901FB019B01240F311D94E6DACFDF93CF930F92CDB7DEB7BE016F5F1C
+:2007A0007F4F41E050E00E949503019719F02FEF3FEF03C08981282F30E0C9010F90CF91F6
+:2007C000DF910895FF920F931F93F82E142F052F40913A0150913B01212F302FC901DC010B
+:2007E000FB016EEF29C0F7FE02C0949101C09081209138013091390124173507ACF48091FC
+:20080000E8008570E1F38091E80082FF03C02FEF3FEF17C09093F100C90101968F73907050
+:20082000892B11F46093E8002F5F3F4F3093390120933801119731961097A9F6812F902FFB
+:200840009C01C9011F910F91FF9008959C018091E80082FFFCCFF901260F311D03C0809182
+:20086000F1008193E217F307D1F7289884E6809336018BEF8093E800CB0108958093E9006A
+:200880008091F200882319F08AE38093E800089508951092370181E08093D70080EA80935D
+:2008A000D80082E189BD09B400FEFDCF61E070E080E090E00E945A0280E98093D8008CE011
+:2008C0008093E2001092E000559A209A08955F926F927F928F929F92AF92BF92CF92DF92A2
+:2008E000EF92FF920F931F93CF93DF93E82E842E752E80913701882371F18B01242F352FBA
+:20090000C901EC017AEFF72E67E0962E9E2050E4552E8E2D90E040E2A42EB12CA822B92271
+:200920003AE3632E20E4C22ED12CC822D92258C09FB7F8949092E9008091E80085FD02C0F1
+:2009400020E004C08091F200252D281B9FBF222361F4FA9419F42FEF3FEF4DC061E070E0BE
+:2009600080E090E00E945A023BC0822F90E0C817D9070CF42C2FC21BD1094FB7F894909208
+:20098000E900A114B10421F406C01092F10021502223D9F719C0E7FC03C0F801922F10C007
+:2009A000C801322F06C0FC010196E491E093F10031503323C1F706C081918093F10091508E
+:2009C0009923D1F7020F111D8091E80085FF05C0209729F4C114D10411F06092E8004FBFAB
+:2009E000209709F0A5CF5D9884E680933501282D372DC9019C01C901DF91CF911F910F9121
+:200A0000FF90EF90DF90CF90BF90AF909F908F907F906F905F9008951F920F920FB60F92CC
+:200A200011242F933F934F935F936F937F938F939F93AF93BF93EF93FF938091E100109275
+:200A4000E100982F83FF0FC01092E90081E08093EB001092EC0082E38093ED0010923701E6
+:200A600088E08093F00092FF34C083E08093E9008091F200882319F08AE38093E8008FB7C2
+:200A8000F89492E09093E9009091F2008FBF992321F082E891E00E9469078091350188233F
+:200AA00051F08091350181508093350180913501882309F45D9A80913601882351F0809169
+:200AC000360181508093360180913601882309F4289AFF91EF91BF91AF919F918F917F9112
+:200AE0006F915F914F913F912F910F900FBE0F901F9018950F931F93DF93CF930F92CDB7E2
+:200B0000DEB719828E010F5F1F4FC8010E948F07C8010E942809898190E00F90CF91DF91B4
+:200B20001F910F9108951F920F920FB60F921124EF92FF921F932F933F934F935F936F93AD
+:200B40007F938F939F93AF93BF93EF93FF93DF93CF93CDB7DEB76197DEBFCDBF1092E900EE
+:200B60008091E80083FF0FC1FE0131969E01275F3F4F03C08091F1008193E217F307D1F71D
+:200B8000289884E68093360182EF8093E800998197FF05C08091E80080FFFCCF03C08EEF7D
+:200BA0008093E800292F30E0C90180769070892B09F0C2C08A81882329F41092F1001092DB
+:200BC000F100D6C0813009F4D3C0833009F4D0C0853049F48091E80080FFFCCF8B818068E4
+:200BE0008093E300C5C0863009F07CC01C81EF80F8841230C1F51092E90010923901109206
+:200C0000380110923B0110923A010E947A0599E0FE013996DF01292F1D922A95E9F79987D2
+:200C20001A8791E09E8790E8988B9AEF998B2091380130913901275F3F4F3C872B878D87B3
+:200C40001092E9001092390110923801F0923B01E0923A0180E0BF0149E050E00E94E203E7
+:200C60000E947A0585C01092E9001092390110923801F0923B01E0923A01123241F482E284
+:200C800090E00E942009892B09F476C071C0113079F488E0E816F10419F481E080933C013A
+:200CA00080913C01882309F06BC0EAE7F1E013C0133009F061C08B81882319F4ECE3F1E0E1
+:200CC0000AC0823019F4E0E4F1E005C0813009F053C0E2E6F1E0449180E8BF0150E00E940C
+:200CE000E20346C0873009F447C0883021F481E08093F1003DC08930D9F523703070232B17
+:200D0000D9F5EFE9F1E091E031E026E39093E9003093EB0084918093EC002093ED009F5F65
+:200D20003196953099F78EE78093EA001092EA008B81809337011CC08F8198851092E900AE
+:200D4000109239011092380190933B0180933A018D81882329F4CE0101960E949B0706C0E9
+:200D6000823051F4CE0101960E94F107882321F08EEF8093E80007C081E28093EB0003C05D
+:200D8000ECE8F1E0A8CF6196DEBFCDBFCF91DF91FF91EF91BF91AF919F918F917F916F9147
+:200DA0005F914F913F912F911F91FF90EF900F900FBE0F901F90189520917E0130917F013D
+:200DC0008091800190918101281B390B2F733070C901089520917E0130917F0180918001AB
+:200DE000909181012817390719F42FEF3FEF09C0E0918001F0918101E25CFE4F8081282FD7
+:200E000030E0C901089520917E0130917F0180918001909181012817390719F42FEF3FEFDD
+:200E200013C0E0918001F0918101E25CFE4F2081809180019091810101968F7390709093CD
+:200E400081018093800130E0C9010895109285011092840188EE93E0A0E0B0E08093860123
+:200E600090938701A0938801B093890180E191E0909383018093820108950F931F93DF93CC
+:200E8000CF930F92CDB7DEB78C01698380910901882369F083E0BE016F5F7F4F41E050E08F
+:200EA0000E9467041816190614F49C0107C081E090E0F8019383828320E030E0C9010F900E
+:200EC000CF91DF911F910F91089583E00E943E040895CF93DF9312C082E00E94C9032FEFDD
+:200EE0008F3F9207C9F0E0917E01F0917F01E25CFE4F8083D0937F01C0937E01C0917E01CE
+:200F0000D0917F012196CF73D0708091800190918101C817D90701F7DF91CF910895FC0161
+:200F200080818E5F808380E863EA71E042E450E00E94E2030895FC0181819081913A59F418
+:200F4000813209F04CC080E062E071E047E050E00E94E20342C0913209F041C0803239F46A
+:200F600082E091E067E070E00E94260436C0823209F035C08281809309018091020190914E
+:200F80000301A0910401B0910501805B9440A040B04019F58091090180FD12C087E797E7ED
+:200FA00090930108809300082BE088E190E00FB6F894A895809360000FBE209360000DC058
+:200FC00088E10FB6F89480936000109260000FBEA895109201081092000881E0089580E025
+:200FE0000895FC0191818081813A31F4913089F080E0933089F40DC0813269F49B3021F4CD
+:20100000828180930A0105C09A3029F4828180930B0181E0089580E00895EF92FF920F9332
+:201020001F938C01E62EDC01ED91FC910480F581E02D0995F82ED801ED91FC910680F781C8
+:20104000E02DC8016E2D09958F2D90E01F910F91FF90EF900895109290011092940110924E
+:20106000930182E291E090939201809391010895EF92FF920F931F93DF93CF930F92CDB7B0
+:20108000DEB789838B017A0184E0BE016F5F7F4F41E050E00E94670484E4B801A7010E9420
+:2010A00067040F90CF91DF911F910F91FF90EF90089582E048E050E00E9438080895FC0125
+:2010C00016821782108611861286138614823496BF010E9459080895DC01683810F0685884
+:2010E00029C0E62FF0E067FF13C0E058F04081E090E002C0880F991FEA95E2F78095149688
+:201100002C911497282314962C93149760E012C0ED59FD4F6491662319F420E030E01DC0EC
+:2011200067FF08C014968C9114978D7F14968C9314976F77FD0190E0662321F086818617FD
+:2011400009F416829F5F31969630B1F7CD011496BD010E94590821E030E0C9010895CF93B4
+:20116000DF93DC01683810F0685825C0E62FF0E067FF12C0E058F04081E090E002C0880F2C
+:20118000991FEA95E2F714962C911497282B14962C93149760E00FC0ED59FD4F64916623A7
+:2011A000D9F167FF08C014968C911497826014968C9314976F7716968C9116978617A9F1DC
+:2011C00017968C911797861781F118968C911897861759F119968C911997861731F11A963C
+:2011E0008C911A97861709F11B968C911B978617E1F0ED01E0E0F0E09E2F8E81882321F482
+:20120000EA0FFB1F668306C09F5F31962196E630F10591F7963049F481E090E013969C9350
+:201220008E93129720E030E007C0CD011496BD010E94590821E030E0C901DF91CF9108958C
+:2012400080E865EE71E045E650E00E94E2030895FC0180818F5F808380E86AE472E049E1E2
+:2012600050E00E94E20308950895CF92DF92EF92FF920F931F93CF93DF937C016B018A01FD
+:20128000C0E0D0E00FC0D6016D916D01D701ED91FC910190F081E02DC7010995C80FD91FC5
+:2012A000015010400115110571F7CE01DF91CF911F910F91FF90EF90DF90CF900895EE0F94
+:2012C000FF1F0590F491E02D0994F894FFCF0D0000E10000000000000101000000003D079E
+:2012E0003509DC060307EA0665076907000000000D083509AF086C085F08FFFFFFFFFFFF19
+:20130000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:20132000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20134000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20136000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20138000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:2013A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:2013C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2013E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:20140000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:20142000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20144000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20146000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20148000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:2014A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:2014C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2014E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:20150000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:20152000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20154000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20156000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20158000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:2015A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:2015C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2015E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:20160000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:20162000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20164000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20166000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20168000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:2016A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:2016C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2016E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:20170000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:20172000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20174000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20176000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20178000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:2017A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:2017C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2017E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:20180000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:20182000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20184000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20186000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20188000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:2018A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:2018C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2018E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:20190000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:20192000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:20194000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20196000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20198000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:2019A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:2019C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2019E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:201A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:201A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:201A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:201A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:201A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:201AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:201AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:201AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:201B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:201B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:201B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:201B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:201B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:201BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:201BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:201BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:201C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:201C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:201C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:201C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:201C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:201CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:201CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:201CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:201D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:201D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:201D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:201D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:201D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:201DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:201DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:201DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:201E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:201E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:201E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:201E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:201E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:201EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:201EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:201EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:201F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:201F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:201F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:201F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:201F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:201FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:201FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:201FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:20200000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0
+:20202000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0
+:20204000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0
+:20206000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80
+:20208000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60
+:2020A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
+:2020C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
+:2020E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
+:20210000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDF
+:20212000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBF
+:20214000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9F
+:20216000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7F
+:20218000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F
+:2021A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3F
+:2021C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1F
+:2021E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
+:20220000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDE
+:20222000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBE
+:20224000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9E
+:20226000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7E
+:20228000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5E
+:2022A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3E
+:2022C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1E
+:2022E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE
+:20230000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDD
+:20232000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:20234000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9D
+:20236000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7D
+:20238000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D
+:2023A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3D
+:2023C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D
+:2023E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD
+:20240000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC
+:20242000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC
+:20244000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
+:20246000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
+:20248000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5C
+:2024A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3C
+:2024C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1C
+:2024E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC
+:20250000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDB
+:20252000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBB
+:20254000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9B
+:20256000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7B
+:20258000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5B
+:2025A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3B
+:2025C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1B
+:2025E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB
+:20260000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDA
+:20262000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBA
+:20264000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9A
+:20266000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7A
+:20268000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5A
+:2026A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3A
+:2026C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A
+:2026E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA
+:20270000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD9
+:20272000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB9
+:20274000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF99
+:20276000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF79
+:20278000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF59
+:2027A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF39
+:2027C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19
+:2027E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9
+:20280000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD8
+:20282000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8
+:20284000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF98
+:20286000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF78
+:20288000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
+:2028A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF38
+:2028C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF18
+:2028E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8
+:20290000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
+:20292000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
+:20294000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:20296000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:20298000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:2029A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:2029C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
+:2029E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
+:202A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6
+:202A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6
+:202A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96
+:202A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF76
+:202A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF56
+:202AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF36
+:202AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16
+:202AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6
+:202B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
+:202B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5
+:202B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95
+:202B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75
+:202B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
+:202BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
+:202BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
+:202BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
+:202C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4
+:202C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4
+:202C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94
+:202C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
+:202C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
+:202CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
+:202CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14
+:202CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4
+:202D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3
+:202D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3
+:202D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93
+:202D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73
+:202D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53
+:202DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33
+:202DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13
+:202DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3
+:202E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
+:202E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2
+:202E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92
+:202E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72
+:202E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
+:202EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
+:202EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
+:202EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
+:202F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1
+:202F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1
+:202F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91
+:202F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71
+:202F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51
+:202FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31
+:202FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11
+:202FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1
+:20300000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD0
+:20302000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
+:20304000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF90
+:20306000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF70
+:20308000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
+:2030A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
+:2030C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
+:2030E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
+:20310000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCF
+:20312000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAF
+:20314000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8F
+:20316000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6F
+:20318000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4F
+:2031A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2F
+:2031C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0F
+:2031E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF
+:20320000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE
+:20322000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE
+:20324000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E
+:20326000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E
+:20328000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E
+:2032A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E
+:2032C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E
+:2032E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE
+:20330000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20332000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20334000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20336000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:20338000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:2033A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2033C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:2033E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:20340000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20342000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20344000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20346000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:20348000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:2034A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2034C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:2034E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:20350000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20352000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20354000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20356000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:20358000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:2035A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2035C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:2035E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:20360000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20362000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20364000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20366000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:20368000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:2036A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2036C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:2036E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:20370000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20372000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20374000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20376000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:20378000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:2037A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:2037E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:20380000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20382000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20384000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:20388000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:2038A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2038C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:2038E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:20390000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:20392000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20394000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20396000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:20398000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:2039A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:2039E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:203A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:203A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:203A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:203A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:203A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:203AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:203AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:203AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:203B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:203B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:203B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:203B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:203B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:203BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:203BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:203BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:203C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:203C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:203C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:203C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:203C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:203CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:203CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:203CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:203D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:203D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:203D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:203D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:203D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:203DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:203DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:203DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:203E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:203E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:203E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:203E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:203E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:203EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:203EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:203EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:203F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:203F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:203F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:203F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:203F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:203FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:203FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:203FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:20400000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0
+:20402000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0
+:20404000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80
+:20406000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60
+:20408000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
+:2040A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
+:2040C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
+:2040E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0
+:20410000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBF
+:20412000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9F
+:20414000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7F
+:20416000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F
+:20418000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3F
+:2041A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1F
+:2041C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
+:2041E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDF
+:20420000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBE
+:20422000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9E
+:20424000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7E
+:20426000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5E
+:20428000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3E
+:2042A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1E
+:2042C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE
+:2042E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDE
+:20430000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:20432000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9D
+:20434000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7D
+:20436000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D
+:20438000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3D
+:2043A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D
+:2043C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD
+:2043E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDD
+:20440000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC
+:20442000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
+:20444000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
+:20446000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5C
+:20448000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3C
+:2044A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1C
+:2044C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC
+:2044E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC
+:20450000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBB
+:20452000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9B
+:20454000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7B
+:20456000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5B
+:20458000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3B
+:2045A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1B
+:2045C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB
+:2045E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDB
+:20460000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBA
+:20462000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9A
+:20464000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7A
+:20466000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5A
+:20468000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3A
+:2046A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A
+:2046C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA
+:2046E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDA
+:20470000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB9
+:20472000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF99
+:20474000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF79
+:20476000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF59
+:20478000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF39
+:2047A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19
+:2047C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9
+:2047E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD9
+:20480000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8
+:20482000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF98
+:20484000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF78
+:20486000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
+:20488000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF38
+:2048A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF18
+:2048C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8
+:2048E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD8
+:20490000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
+:20492000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:20494000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:20496000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:20498000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:2049A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
+:2049C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
+:2049E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
+:204A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6
+:204A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96
+:204A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF76
+:204A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF56
+:204A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF36
+:204AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16
+:204AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6
+:204AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6
+:204B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5
+:204B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95
+:204B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75
+:204B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
+:204B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
+:204BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
+:204BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
+:204BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
+:204C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4
+:204C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94
+:204C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
+:204C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
+:204C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
+:204CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14
+:204CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4
+:204CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4
+:204D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3
+:204D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93
+:204D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73
+:204D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53
+:204D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33
+:204DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13
+:204DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3
+:204DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3
+:204E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2
+:204E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92
+:204E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72
+:204E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
+:204E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
+:204EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
+:204EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
+:204EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
+:204F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1
+:204F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91
+:204F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71
+:204F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51
+:204F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31
+:204FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11
+:204FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1
+:204FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1
+:20500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
+:20502000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF90
+:20504000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF70
+:20506000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
+:20508000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
+:2050A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
+:2050C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
+:2050E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD0
+:20510000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAF
+:20512000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8F
+:20514000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6F
+:20516000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4F
+:20518000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2F
+:2051A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0F
+:2051C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF
+:2051E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCF
+:20520000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE
+:20522000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E
+:20524000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E
+:20526000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E
+:20528000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E
+:2052A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E
+:2052C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE
+:2052E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE
+:20530000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:20532000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D
+:20534000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D
+:20536000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D
+:20538000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D
+:2053A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D
+:2053C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED
+:2053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:20540000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC
+:20542000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:20544000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:20546000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C
+:20548000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C
+:2054A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C
+:2054C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC
+:2054E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC
+:20550000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB
+:20552000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B
+:20554000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B
+:20556000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B
+:20558000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B
+:2055A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B
+:2055C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB
+:2055E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB
+:20560000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA
+:20562000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A
+:20564000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A
+:20566000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A
+:20568000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A
+:2056A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A
+:2056C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA
+:2056E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA
+:20570000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9
+:20572000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89
+:20574000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69
+:20576000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49
+:20578000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29
+:2057A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09
+:2057C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9
+:2057E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9
+:20580000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:20582000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88
+:20584000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:20586000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48
+:20588000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28
+:2058A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08
+:2058C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8
+:2058E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8
+:20590000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:20592000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:20594000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:20596000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:20598000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
+:2059A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:2059C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:2059E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:205A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6
+:205A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86
+:205A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:205A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46
+:205A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26
+:205AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06
+:205AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6
+:205AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6
+:205B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5
+:205B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85
+:205B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65
+:205B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
+:205B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:205BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:205BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:205BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:205C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4
+:205C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84
+:205C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64
+:205C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44
+:205C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24
+:205CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04
+:205CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4
+:205CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4
+:205D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3
+:205D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83
+:205D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63
+:205D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43
+:205D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23
+:205DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03
+:205DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3
+:205DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3
+:205E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2
+:205E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82
+:205E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62
+:205E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
+:205E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:205EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:205EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:205EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:205F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1
+:205F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81
+:205F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61
+:205F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41
+:205F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21
+:205FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01
+:205FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1
+:205FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1
+:20600000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0
+:20602000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80
+:20604000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60
+:20606000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
+:20608000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
+:2060A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
+:2060C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0
+:2060E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0
+:20610000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9F
+:20612000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7F
+:20614000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F
+:20616000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3F
+:20618000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1F
+:2061A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
+:2061C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDF
+:2061E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBF
+:20620000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9E
+:20622000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7E
+:20624000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5E
+:20626000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3E
+:20628000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1E
+:2062A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE
+:2062C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDE
+:2062E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBE
+:20630000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9D
+:20632000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7D
+:20634000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D
+:20636000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3D
+:20638000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D
+:2063A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD
+:2063C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDD
+:2063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:20640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
+:20642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
+:20644000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5C
+:20646000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3C
+:20648000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1C
+:2064A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC
+:2064C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC
+:2064E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC
+:20650000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9B
+:20652000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7B
+:20654000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5B
+:20656000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3B
+:20658000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1B
+:2065A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB
+:2065C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDB
+:2065E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBB
+:20660000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9A
+:20662000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7A
+:20664000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5A
+:20666000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3A
+:20668000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A
+:2066A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA
+:2066C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDA
+:2066E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBA
+:20670000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF99
+:20672000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF79
+:20674000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF59
+:20676000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF39
+:20678000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19
+:2067A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9
+:2067C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD9
+:2067E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB9
+:20680000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF98
+:20682000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF78
+:20684000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
+:20686000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF38
+:20688000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF18
+:2068A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8
+:2068C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD8
+:2068E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8
+:20690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:20692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:20694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:20696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:20698000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
+:2069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
+:2069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
+:2069E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
+:206A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96
+:206A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF76
+:206A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF56
+:206A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF36
+:206A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16
+:206AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6
+:206AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6
+:206AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6
+:206B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95
+:206B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75
+:206B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
+:206B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
+:206B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
+:206BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
+:206BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
+:206BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5
+:206C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94
+:206C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74
+:206C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54
+:206C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34
+:206C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14
+:206CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4
+:206CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4
+:206CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4
+:206D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93
+:206D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73
+:206D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53
+:206D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33
+:206D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13
+:206DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3
+:206DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3
+:206DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3
+:206E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92
+:206E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72
+:206E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
+:206E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
+:206E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
+:206EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
+:206EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
+:206EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2
+:206F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91
+:206F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71
+:206F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51
+:206F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31
+:206F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11
+:206FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1
+:206FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1
+:206FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1
+:2070000055C000006EC000006CC000006AC0000068C0000066C0000064C0000062C0000043
+:2070200060C000005EC00000FCC400005AC0000058C0000056C0000054C0000052C00000E4
+:2070400050C000005DC000004CC000004AC0000048C0000046C0000044C0000042C00000D9
+:2070600040C000003EC000003CC000003AC0000038C0000036C0000034C0000032C0000048
+:2070800030C000002EC000002CC000002AC0000028C0000026C0000024C0000022C00000A8
+:2070A00020C000001EC000001CC0000011241FBECFEFDAE0DEBFCDBF11E0A0E0B1E0E6E4B7
+:2070C000FFE702C005900D92A63AB107D9F711E0A6EAB1E001C01D92AF3BB107E1F74FD34E
+:2070E00030C78ECFF89410926F001092810081E085BF15BE47985D9A289A0C94000008952F
+:207100001F920F920FB60F9211242F938F939F93EF93FF9310928500109284008091A60153
+:207120009091A701009741F001979093A7018093A601892B09F45D9A8091A8019091A90174
+:20714000009741F001979093A9018093A801892B09F4289A8091AC019091AD01019690938C
+:20716000AD018093AC01E0E0F0E0859194918F5F9F4F49F08091AA019091AB01019690937E
+:20718000AB018093AA01FF91EF919F918F912F910F900FBE0F901F90189584E08093E9009E
+:2071A0000DC08091E8008B778093E80003C08EB3882351F08091E80082FFF9CF8091E800E1
+:2071C00085FFEFCF8091F1000895982F83E08093E9008091E80085FD0DC08091E8008E7762
+:2071E0008093E80003C08EB3882369F08091E80080FFF9CF9093F1005D9884E690E0909346
+:20720000A7018093A60108954F925F926F927F928F929F92AF92BF92CF92DF92EF92FF92C3
+:207220000F931F93CF93DF9384E08093E9008091E80082FF57C2289884E690E09093A901CC
+:207240008093A801AADF182F853481F48CE49DE19093AB018093AA0107B600FCFDCFF999E2
+:20726000FECF81E180935700E89503C0843519F494DF8DE00DC28C34E1F38035D1F38437F8
+:2072800021F484E4A2DF80E003C2813611F489E5FFC18134B1F481DF182F7FDF90E0880F7B
+:2072A000991FAA2797FDA095BA2F312F330F20E0442737FD4095542F822B932BA42BB52BE0
+:2072C000B8C1803711F483E5E3C1833549F4C0E0D1E089917ADF21E0C730D207D1F7D9C181
+:2072E000863521F481E371DF80E3D2C1833731F487E86BDF85E969DF8EE1CAC18536B9F464
+:20730000E0E0F0E093E085E090935700E89507B600FCFDCF80935700E89507B600FCFDCF1D
+:20732000E058FF4FA0E7E030FA0771F7A2CF823739F4E1E0F0E089E0809357008491A8C18E
+:20734000863439F4E0E0F0E089E08093570084919FC18E3439F4E3E0F0E089E08093570019
+:20736000849196C1813539F4E2E0F0E089E08093570084918DC1823631F489E526DF80E046
+:2073800024DF80E885C1823419F0873609F0E5C01092AB011092AA0100DF082FFEDEF82E6F
+:2073A000FCDE682E8554823008F071C1902F80E0CF2DD0E0C82BD92B10926F00173609F08F
+:2073C0004BC081E180935700E895DD24CC24C3943FC0E090AF01F090B0010091B1011091DD
+:2073E000B201B6E46B16D9F4ED2DF0E0EE29FF29E4918E2FEADEDD2081F082E090E0A0E00F
+:20740000B0E0E80EF91E0A1F1B1FE092AF01F092B0010093B1011093B201DC2418C0D801CB
+:20742000C701B695A7959795879575D5CEDE82E090E0A0E0B0E0E80EF91E0A1F1B1FE092FB
+:20744000AF01F092B0010093B1011093B2012197209709F0BECF7DC08090AF019090B001EB
+:20746000A090B101B090B20196E4691609F05DC083E0F40180935700E89507B600FCFDCF64
+:2074800054C0F6E46F1661F5772031F1E090AF01F090B0010091B1011091B2017EDED82E20
+:2074A000CC24852D90E08C299D29F7010C0140925700E895112482E090E0A0E0B0E0E80E87
+:2074C000F91E0A1F1B1FE092AF01F092B0010093B1011093B20102C060DE582E742423C041
+:2074E000E090AF01F090B0010091B1011091B20116950795F794E79450DE682FC70113D5E2
+:207500008091AF019091B001A091B101B091B2010296A11DB11D8093AF019093B001A09313
+:20752000B101B093B201219704C05524772444244394209709F0A5CF96E4691641F485E01D
+:20754000F40180935700E89507B600FCFDCF8DE03CDE82E080936F009CC0833471F4009156
+:20756000AF011091B00119DE90E021E0F8010C0120935700E89511247CCE833619F5E0905E
+:20758000AF01F090B0010091B1011091B20105DEF701E16090E021E00C0120935700E89552
+:2075A000112482E090E0A0E0B0E0E80EF91E0A1F1B1FE092AF01F092B0010093B101109307
+:2075C000B20157CE8D3661F4E091AF01F091B00185E080935700E89507B600FCFDCF49CE80
+:2075E000823551F4E091AF01F091B00105911491812FEBDD802F4CC0843421F5E090AF01E0
+:20760000F090B0010091B1011091B20116950795F794E794C2DD682FC70185D48091AF013D
+:207620009091B001A091B101B091B2010296A11DB11D8093AF019093B001A093B101B093BE
+:20764000B20117CE843609F5E090AF01F090B0010091B1011091B201D801C701B695A795CA
+:207660009795879558D4B1DD82E090E0A0E0B0E0E80EF91E0A1F1B1FE092AF01F092B00161
+:207680000093B1011093B20104C08B3111F08FE39CDD83E08093E9009091E8008091E80082
+:2076A0008E778093E80095FF04C010C08EB38823C9F08091E80080FFF9CF8091E8008E77BF
+:2076C0008093E80003C08EB3882361F08091E80080FFF9CF84E08093E9008091E8008B7714
+:2076E0008093E800DF91CF911F910F91FF90EF90DF90CF90BF90AF909F908F907F906F90A9
+:207700005F904F9008959091B701892F8F77813249F58091B8018032A1F0813219F5913ADD
+:2077200009F58091E800877F8093E8008CE091E067E070E027D28091E8008B778093E800EE
+:207740000895913279F48091E800877F8093E8008CE091E067E070E079D28091E8008E77A5
+:207760008093E800089582E061EC42E0D1D083E061E842E1CDD084E060E842E1C9C01F9389
+:20778000209100081092000844B714BE88E10FB6F89480936000109260000FBE80E8E0E095
+:2077A000F0E00FB6F89480936100E09361000FBE31E035BF92E095BF3F9A209A559A809333
+:2077C00061001092610047985D9A289A109289008AEF8093880090936F0083E080938100E5
+:2077E000859194918F5F9F4F11F03093AE01942F41FF19C0809109012817A9F08093000815
+:20780000789480911301882339F08091AC019091AD018F5E9240C8F310920008F89481E0C5
+:20782000809313010CC090FF04C08091AE01882351F493FF09C080910901281729F0809173
+:20784000AE01882309F04EDCD4D078941092AB011092AA011EEF20C0D7DC4BD38091AA01E6
+:207860009091AB0181549F4110F0109213018091B3019091B40101969093B4018093B301FF
+:20788000292F97FF03C0512F591B252F220F281710F4479801C0479A809113018823E1F653
+:2078A0008091E00081608093E0001CDC80E090E01F910895FA01923049F0933061F0913023
+:2078C000F9F484E191E022E130E01EC086E291E02EE330E019C0882329F484E691E024E07A
+:2078E00030E012C0813029F488E691E022E230E00BC0823029F48CE891E028E130E004C089
+:2079000080E090E020E030E091838083C90108958093E9008091EB0081608093EB00109290
+:20792000ED006093EC004093ED008091EE00881F8827881F08958091B70188238CF403C06B
+:207940008EB38823B1F08091E80082FFF9CF8091E8008B778093E80008958EB3882349F0A0
+:207960008091E80080FFF9CF8091E8008E778093E8000895EF92FF920F931F9345D04CD09A
+:2079800008ED10E0F80180818F77808380818068808380818F7D808319BC1EBA1092B501FE
+:2079A00080EEE82EF12CF70180818B7F8083F80180818160808380E060E042E0A9DFE1EE29
+:2079C000F0E080818E7F8083E2EEF0E0808181608083808188608083F70180818E7F80834C
+:2079E000F8018081806180831F910F91FF90EF900895E7EDF0E08081816080838AE482BF76
+:207A000081E08093B601B6CFE8EDF0E080818E7F80831092E20008951092DA001092E100E0
+:207A200008951F920F920FB60F9211242F933F934F935F936F937F938F939F93AF93BF9358
+:207A4000EF93FF938091DA0080FF1BC08091D80080FF17C08091DA008E7F8093DA00809198
+:207A6000D90080FF0BC080E189BD82E189BD09B400FEFDCF81E08EBB3BD203C019BC1EBAE5
+:207A800037D28091E10080FF17C08091E20080FF13C08091E2008E7F8093E2008091E20068
+:207AA00080618093E2008091D80080628093D80019BC85E08EBB1CD28091E10084FF2CC068
+:207AC0008091E20084FF28C080E189BD82E189BD09B400FEFDCF8091D8008F7D8093D80091
+:207AE0008091E1008F7E8093E1008091E2008F7E8093E2008091E20081608093E2008091C4
+:207B0000B501882331F48091E30087FD02C081E001C084E08EBBECD18091E10083FF21C0C4
+:207B20008091E20083FF1DC08091E100877F8093E10082E08EBB1092B5018091E1008E7F05
+:207B40008093E1008091E2008E7F8093E2008091E20080618093E20080E060E042E0D8DEFB
+:207B6000C7D1FF91EF91BF91AF919F918F917F916F915F914F913F912F910F900FBE0F9002
+:207B80001F9018959C014091BD015091BE014617570718F4F90190E044C06115710511F09B
+:207BA000AB01F8CF8091E8008E778093E80040E050E0F0CF8EB3882309F444C0853009F4AB
+:207BC00043C08091E80083FF02C081E008958091E80082FD31C08091E80080FF22C0809193
+:207BE000F3009091F200782F60E0292F30E0262B372B07C081918093F100415050402F5FF1
+:207C00003F4F4115510519F02830310598F390E02830310509F491E08091E8008E7780938B
+:207C2000E8004115510531F6992321F605C08EB3882341F0853041F08091E80082FFF7CFAE
+:207C400080E0089582E0089583E008959C016115710529F48091E8008B778093E800F90192
+:207C600026C08EB3882391F1853091F18091E80083FF02C081E008958091E80082FFF1CF04
+:207C800006C08091F10081936150704059F02091F3008091F200322F20E090E0822B932B7B
+:207CA000892B79F78091E8008B778093E80061157105B9F605C08EB3882341F0853041F047
+:207CC0008091E80080FFF7CF80E0089582E0089583E008950F931F93DF93CF9300D0CDB7EE
+:207CE000DEB7E7EBF1E08091F100819381E0EF3BF807C9F708DD8091E80083FFE4C08091D7
+:207D0000B7019091B801953009F46DC0963040F4913081F1913070F0933009F0D4C02AC05A
+:207D2000983009F4A3C0993009F4B2C0963009F0CAC07CC0803809F4C6C0823809F0C3C0ED
+:207D40008091BB0187708093E9008091EB001092E9002091E800277F2093E80090E025E08D
+:207D6000969587952A95E1F781708093F1001092F10087C0882319F0823009F0A4C08F7193
+:207D8000823009F0A0C08091B901882331F52091BB01277009F497C02093E9008091EB004C
+:207DA00080FF1BC0933021F48091EB00806213C08091EB0080618093EB0081E090E002C072
+:207DC000880F991F2A95E2F78093EA001092EA008091EB0088608093EB001092E9008091B5
+:207DE000E800877F51C0882309F06DC01091B9011F770FB7F8948091E800877F8093E80076
+:207E00009ADD8091E80080FFFCCF8091E3008078812B8093E30080688093E300112311F403
+:207E200082E001C083E08EBB0FBF4DC08058823008F049C08091B9019091BA016091BB01B9
+:207E4000AE014F5F5F4F36DDBC01009709F43BC08091E800877F8093E80089819A8192DE29
+:207E60008091E8008B778093E8002DC0803859F58091E800877F8093E8008091B501809345
+:207E8000F1008091E8008E778093E80054DD1BC08823C9F49091B9019230A8F48091E80052
+:207EA000877F8093E8009093B50145DD8091B501882331F48091E30087FD02C081E001C0D3
+:207EC00084E08EBB50DC8091E80083FF0AC08091EB0080628093EB008091E800877F809396
+:207EE000E8000F900F90CF91DF911F910F91089508951F938EB3882361F01091E9001092E7
+:207F0000E9008091E80083FF01C0E4DE17701093E9001F910895F999FECF92BD81BDF89A9C
+:207F2000992780B50895262FF999FECF1FBA92BD81BD20BD0FB6F894FA9AF99A0FBE0196DC
+:207F40000895F894FFCF4341544552494E4100770008000000000000080112011001020035
+:207F600000084123410001000201000109023E000201008032090400000102020100052415
+:207F8000001001042402040524060001070582030800FF09040100020A00000007050402AE
+:207FA00010000107058302100001040309042203410072006400750069006E006F002000E3
+:207FC000590075006E002000200020002000200000001803410072006400750069006E0047
+:0C7FE0006F0020004C004C00430000002B
+:00000001FF
diff --git a/cores/arduino/IPAddress.h b/cores/arduino/IPAddress.h
index 2585aec..078ac97 100644
--- a/cores/arduino/IPAddress.h
+++ b/cores/arduino/IPAddress.h
@@ -26,6 +26,7 @@
#ifndef IPAddress_h
#define IPAddress_h
+#include <stdint.h>
#include <Printable.h>
// A class to make it easier to handle and pass around IP addresses
diff --git a/libraries/Bridge/Bridge.cpp b/libraries/Bridge/Bridge.cpp
new file mode 100644
index 0000000..a3d911f
--- /dev/null
+++ b/libraries/Bridge/Bridge.cpp
@@ -0,0 +1,229 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include "Bridge.h"
+#include <util/crc16.h>
+
+BridgeClass::BridgeClass(Stream &_stream) :
+ index(0), stream(_stream), started(false), max_retries(0) {
+ // Empty
+}
+
+void BridgeClass::begin() {
+ if (started)
+ return;
+ started = true;
+
+ // Wait for U-boot to finish startup
+ do {
+ dropAll();
+ delay(1000);
+ } while (stream.available()>0);
+
+ while (true) {
+ // Bridge interrupt:
+ // - Ask the bridge to close itself
+ uint8_t quit_cmd[] = {'X','X','X','X','X'};
+ max_retries = 1;
+ transfer(quit_cmd, 5);
+
+ // Bridge startup:
+ // - If the bridge is not running starts it safely
+ stream.print(CTRL_C);
+ delay(250);
+ stream.print(F("\n"));
+ delay(250);
+ stream.print(F("\n"));
+ delay(500);
+ // Wait for OpenWRT message
+ // "Press enter to activate console"
+ stream.print(F("run-bridge\n"));
+ delay(500);
+ dropAll();
+
+ // Reset the brigde to check if it is running
+ uint8_t cmd[] = {'X','X', '1','0','0'};
+ uint8_t res[1];
+ max_retries = 50;
+ uint16_t l = transfer(cmd, 5, res, 1);
+ if (l == TRANSFER_TIMEOUT) {
+ // Bridge didn't start...
+ // Maybe the board is starting-up?
+
+ // Wait and retry
+ delay(1000);
+ continue;
+ }
+ if (res[0] != 0)
+ while (true);
+
+ max_retries = 50;
+ return;
+ }
+}
+
+void BridgeClass::put(const char *key, const char *value) {
+ // TODO: do it in a more efficient way
+ String cmd = "D";
+ cmd += key;
+ cmd += "\xFE";
+ cmd += value;
+ transfer((uint8_t*)cmd.c_str(), cmd.length());
+}
+
+unsigned int BridgeClass::get(const char *key, uint8_t *value, unsigned int maxlen) {
+ uint8_t cmd[] = {'d'};
+ unsigned int l = transfer(cmd, 1, (uint8_t *)key, strlen(key), value, maxlen);
+ if (l < maxlen)
+ value[l] = 0; // Zero-terminate string
+ return l;
+}
+
+void BridgeClass::crcUpdate(uint8_t c) {
+
+ CRC = _crc_ccitt_update(CRC, c);
+ //CRC = CRC ^ c;
+ //CRC = (CRC >> 8) + (CRC << 8);
+}
+
+void BridgeClass::crcReset() {
+ CRC = 0xFFFF;
+}
+
+void BridgeClass::crcWrite() {
+ stream.write((char)(CRC >> 8));
+ stream.write((char)(CRC & 0xFF));
+}
+
+bool BridgeClass::crcCheck(uint16_t _CRC) {
+ return CRC == _CRC;
+}
+
+uint16_t BridgeClass::transfer(const uint8_t *buff1, uint16_t len1,
+ const uint8_t *buff2, uint16_t len2,
+ const uint8_t *buff3, uint16_t len3,
+ uint8_t *rxbuff, uint16_t rxlen)
+{
+ uint16_t len = len1 + len2 + len3;
+ uint8_t retries = 0;
+ for ( ; retries<max_retries; retries++, delay(100), dropAll() /* Delay for retransmission */) {
+ // Send packet
+ crcReset();
+ stream.write((char)0xFF); // Start of packet (0xFF)
+ crcUpdate(0xFF);
+ stream.write((char)index); // Message index
+ crcUpdate(index);
+ stream.write((char)((len >> 8) & 0xFF)); // Message length (hi)
+ crcUpdate((len >> 8) & 0xFF);
+ stream.write((char)(len & 0xFF)); // Message length (lo)
+ crcUpdate(len & 0xFF);
+ for (uint16_t i=0; i<len1; i++) { // Payload
+ stream.write((char)buff1[i]);
+ crcUpdate(buff1[i]);
+ }
+ for (uint16_t i=0; i<len2; i++) { // Payload
+ stream.write((char)buff2[i]);
+ crcUpdate(buff2[i]);
+ }
+ for (uint16_t i=0; i<len3; i++) { // Payload
+ stream.write((char)buff3[i]);
+ crcUpdate(buff3[i]);
+ }
+ crcWrite(); // CRC
+
+ // Wait for ACK in 100ms
+ if (timedRead(100) != 0xFF)
+ continue;
+ crcReset();
+ crcUpdate(0xFF);
+
+ // Check packet index
+ if (timedRead(5) != index)
+ continue;
+ crcUpdate(index);
+
+ // Recv len
+ int lh = timedRead(5);
+ if (lh < 0)
+ continue;
+ crcUpdate(lh);
+ int ll = timedRead(5);
+ if (ll < 0)
+ continue;
+ crcUpdate(ll);
+ uint16_t l = lh;
+ l <<= 8;
+ l += ll;
+
+ // Recv data
+ for (uint16_t i=0; i<l; i++) {
+ int c = timedRead(5);
+ if (c < 0)
+ continue;
+ // Cut received data if rxbuffer is too small
+ if (i < rxlen)
+ rxbuff[i] = c;
+ crcUpdate(c);
+ }
+
+ // Check CRC
+ int crc_hi = timedRead(5);
+ if (crc_hi < 0)
+ continue;
+ int crc_lo = timedRead(5);
+ if (crc_lo < 0)
+ continue;
+ if (!crcCheck((crc_hi<<8)+crc_lo))
+ continue;
+
+ // Increase index
+ index++;
+
+ // Return bytes received
+ if (l > rxlen)
+ return rxlen;
+ return l;
+ }
+
+ // Max retries exceeded
+ return TRANSFER_TIMEOUT;
+}
+
+int BridgeClass::timedRead(unsigned int timeout) {
+ int c;
+ unsigned long _startMillis = millis();
+ do {
+ c = stream.read();
+ if (c >= 0) return c;
+ } while(millis() - _startMillis < timeout);
+ return -1; // -1 indicates timeout
+}
+
+void BridgeClass::dropAll() {
+ while (stream.available() > 0) {
+ stream.read();
+ }
+}
+
+// Bridge instance
+#ifdef __AVR_ATmega32U4__
+ // Leonardo variants (where HardwareSerial is Serial1)
+ SerialBridgeClass Bridge(Serial1);
+#else
+ SerialBridgeClass Bridge(Serial);
+#endif
diff --git a/libraries/Bridge/Bridge.h b/libraries/Bridge/Bridge.h
new file mode 100644
index 0000000..e4ed9f8
--- /dev/null
+++ b/libraries/Bridge/Bridge.h
@@ -0,0 +1,97 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef BRIDGE_H_
+#define BRIDGE_H_
+
+#include <Arduino.h>
+#include <Stream.h>
+
+class BridgeClass {
+public:
+ BridgeClass(Stream &_stream);
+ void begin();
+
+ // Methods to handle key/value datastore
+ void put(const char *key, const char *value);
+ void put(const String &key, const String &value)
+ { put(key.c_str(), value.c_str()); }
+ unsigned int get(const char *key, uint8_t *buff, unsigned int size);
+ unsigned int get(const char *key, char *value, unsigned int maxlen)
+ { get(key, reinterpret_cast<uint8_t *>(value), maxlen); }
+
+ // Trasnfer a frame (with error correction and response)
+ uint16_t transfer(const uint8_t *buff1, uint16_t len1,
+ const uint8_t *buff2, uint16_t len2,
+ const uint8_t *buff3, uint16_t len3,
+ uint8_t *rxbuff, uint16_t rxlen);
+ // multiple inline versions of the same function to allow efficient frame concatenation
+ uint16_t transfer(const uint8_t *buff1, uint16_t len1)
+ { return transfer(buff1, len1, NULL, 0); }
+ uint16_t transfer(const uint8_t *buff1, uint16_t len1,
+ uint8_t *rxbuff, uint16_t rxlen)
+ { return transfer(buff1, len1, NULL, 0, rxbuff, rxlen); }
+ uint16_t transfer(const uint8_t *buff1, uint16_t len1,
+ const uint8_t *buff2, uint16_t len2,
+ uint8_t *rxbuff, uint16_t rxlen)
+ { return transfer(buff1, len1, buff2, len2, NULL, 0, rxbuff, rxlen); }
+
+ static const int TRANSFER_TIMEOUT = 0xFFFF;
+
+private:
+ uint8_t index;
+ int timedRead(unsigned int timeout);
+ void dropAll();
+
+private:
+ void crcUpdate(uint8_t c);
+ void crcReset();
+ void crcWrite();
+ bool crcCheck(uint16_t _CRC);
+ uint16_t CRC;
+
+private:
+ static const char CTRL_C = 3;
+ Stream &stream;
+ bool started;
+ uint8_t max_retries;
+};
+
+// This subclass uses a serial port Stream
+class SerialBridgeClass : public BridgeClass {
+public:
+ SerialBridgeClass(HardwareSerial &_serial)
+ : BridgeClass(_serial), serial(_serial) {
+ // Empty
+ }
+
+ void begin() {
+ serial.begin(250000);
+ BridgeClass::begin();
+ }
+
+private:
+ HardwareSerial &serial;
+};
+
+extern SerialBridgeClass Bridge;
+
+#endif /* BRIDGE_H_ */
+
+#include <Console.h>
+#include <Process.h>
diff --git a/libraries/Bridge/Console.cpp b/libraries/Bridge/Console.cpp
new file mode 100644
index 0000000..8607421
--- /dev/null
+++ b/libraries/Bridge/Console.cpp
@@ -0,0 +1,153 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <Console.h>
+
+// Default constructor uses global Bridge instance
+ConsoleClass::ConsoleClass() :
+ bridge(Bridge), inBuffered(0), inReadPos(0), inBuffer(NULL),
+ autoFlush(true)
+{
+ // Empty
+}
+
+// Constructor with a user provided BridgeClass instance
+ConsoleClass::ConsoleClass(BridgeClass &_b) :
+ bridge(_b), inBuffered(0), inReadPos(0), inBuffer(NULL),
+ autoFlush(true)
+{
+ // Empty
+}
+
+ConsoleClass::~ConsoleClass() {
+ end();
+}
+
+size_t ConsoleClass::write(uint8_t c) {
+ if (autoFlush) {
+ uint8_t tmp[] = { 'P', c };
+ bridge.transfer(tmp, 2);
+ return 1;
+ } else {
+ outBuffer[outBuffered++] = c;
+ if (outBuffered == outBufferSize)
+ flush();
+ }
+}
+
+size_t ConsoleClass::write(const uint8_t *buff, size_t size) {
+ if (autoFlush) {
+ // TODO: do it in a more efficient way
+ uint8_t *tmp = new uint8_t[size+1];
+ tmp[0] = 'P';
+ memcpy(tmp+1, buff, size);
+ bridge.transfer(tmp, size+1);
+ delete[] tmp;
+ return size;
+ } else {
+ while (size > 0) {
+ outBuffer[outBuffered++] = *buff++;
+ size--;
+ if (outBuffered == outBufferSize)
+ flush();
+ }
+ }
+}
+
+void ConsoleClass::flush() {
+ if (autoFlush)
+ return;
+
+ bridge.transfer(outBuffer, outBuffered);
+ outBuffered = 1;
+}
+
+void ConsoleClass::noBuffer() {
+ if (autoFlush)
+ return;
+ delete[] outBuffer;
+ autoFlush = true;
+}
+
+void ConsoleClass::buffer(uint8_t size) {
+ noBuffer();
+ if (size==0)
+ return;
+ outBuffer = new uint8_t[size+1];
+ outBuffer[0] = 'P'; // WRITE tag
+ outBufferSize = size+1;
+ outBuffered = 1;
+ autoFlush = false;
+}
+
+bool ConsoleClass::connected() {
+ uint8_t tmp = 'a';
+ bridge.transfer(&tmp, 1, &tmp, 1);
+ return tmp==1;
+}
+
+int ConsoleClass::available() {
+ // Look if there is new data available
+ doBuffer();
+ return inBuffered;
+}
+
+int ConsoleClass::read() {
+ doBuffer();
+ if (inBuffered == 0)
+ return -1; // no chars available
+ else {
+ inBuffered--;
+ return inBuffer[inReadPos++];
+ }
+}
+
+int ConsoleClass::peek() {
+ doBuffer();
+ if (inBuffered == 0)
+ return -1; // no chars available
+ else
+ return inBuffer[inReadPos];
+}
+
+void ConsoleClass::doBuffer() {
+ // If there are already char in buffer exit
+ if (inBuffered > 0)
+ return;
+
+ // Try to buffer up to 32 characters
+ inReadPos = 0;
+ uint8_t tmp[] = { 'p', BUFFER_SIZE };
+ inBuffered = bridge.transfer(tmp, 2, inBuffer, BUFFER_SIZE);
+}
+
+void ConsoleClass::begin() {
+ bridge.begin();
+ end();
+ inBuffer = new uint8_t[BUFFER_SIZE];
+}
+
+void ConsoleClass::end() {
+ noBuffer();
+ if (inBuffer) {
+ delete[] inBuffer;
+ inBuffer = NULL;
+ }
+}
+
+ConsoleClass Console;
diff --git a/libraries/Bridge/Console.h b/libraries/Bridge/Console.h
new file mode 100644
index 0000000..73a9739
--- /dev/null
+++ b/libraries/Bridge/Console.h
@@ -0,0 +1,69 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef CONSOLE_H_
+#define CONSOLE_H_
+
+#include <Bridge.h>
+
+class ConsoleClass : public Stream {
+public:
+ // Default constructor uses global Bridge instance
+ ConsoleClass();
+ // Constructor with a user provided BridgeClass instance
+ ConsoleClass(BridgeClass &_b);
+ ~ConsoleClass();
+
+ void begin();
+ void end();
+
+ void buffer(uint8_t size);
+ void noBuffer();
+
+ bool connected();
+
+ // Stream methods
+ // (read from console socket)
+ int available();
+ int read();
+ int peek();
+ // (write to console socket)
+ size_t write(uint8_t);
+ size_t write(const uint8_t *buffer, size_t size);
+ void flush();
+
+ operator bool () { return connected(); }
+
+private:
+ BridgeClass &bridge;
+
+ void doBuffer();
+ uint8_t inBuffered;
+ uint8_t inReadPos;
+ static const int BUFFER_SIZE = 32;
+ uint8_t *inBuffer;
+
+ bool autoFlush;
+ uint8_t outBuffered;
+ uint8_t outBufferSize;
+ uint8_t *outBuffer;
+};
+
+extern ConsoleClass Console;
+
+#endif
diff --git a/libraries/Bridge/FileIO.cpp b/libraries/Bridge/FileIO.cpp
new file mode 100644
index 0000000..83c889e
--- /dev/null
+++ b/libraries/Bridge/FileIO.cpp
@@ -0,0 +1,250 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <FileIO.h>
+
+
+
+File::File(BridgeClass &b) : mode(255), bridge(b) {
+ // Empty
+}
+
+File::File(const char *_filename, uint8_t _mode, BridgeClass &b) : mode(_mode), bridge(b) {
+ filename = _filename;
+ char modes[] = {'r','w','a'};
+ uint8_t cmd[] = {'F', modes[mode]};
+ uint8_t res[2];
+ dirPosition = 1;
+ bridge.transfer(cmd, 2, (uint8_t*)filename.c_str(), filename.length(), res, 2);
+ if (res[0] != 0) { // res[0] contains error code
+ mode = 255; // In case of error keep the file closed
+ return;
+ }
+ handle = res[1];
+ buffered = 0;
+}
+
+File::operator bool() {
+ return (mode != 255);
+}
+
+File::~File() {
+ close();
+}
+
+size_t File::write(uint8_t c) {
+ return write(&c, 1);
+}
+
+size_t File::write(const uint8_t *buf, size_t size) {
+ if (mode == 255)
+ return -1;
+ uint8_t cmd[] = {'g', handle};
+ uint8_t res[1];
+ bridge.transfer(cmd, 2, buf, size, res, 1);
+ if (res[0] != 0) // res[0] contains error code
+ return -res[0];
+ return size;
+}
+
+int File::read() {
+ doBuffer();
+ if (buffered == 0)
+ return -1; // no chars available
+ else {
+ buffered--;
+ return buffer[readPos++];
+ }
+}
+
+int File::peek() {
+ doBuffer();
+ if (buffered == 0)
+ return -1; // no chars available
+ else
+ return buffer[readPos];
+}
+
+boolean File::seek(uint32_t position) {
+ uint8_t cmd[] = {
+ 's',
+ handle,
+ (position >> 24) & 0xFF,
+ (position >> 16) & 0xFF,
+ (position >> 8) & 0xFF,
+ position & 0xFF
+ };
+ uint8_t res[1];
+ bridge.transfer(cmd, 6, res, 1);
+ if (res[0]==0) {
+ // If seek succeed then flush buffers
+ buffered = 0;
+ return true;
+ }
+ return false;
+}
+
+uint32_t File::position() {
+ uint8_t cmd[] = {'S', handle};
+ uint8_t res[5];
+ bridge.transfer(cmd, 2, res, 5);
+ //err = res[0]; // res[0] contains error code
+ uint32_t pos = res[1] << 24;
+ pos += res[2] << 16;
+ pos += res[3] << 8;
+ pos += res[4];
+ return pos - buffered;
+}
+
+void File::doBuffer() {
+ // If there are already char in buffer exit
+ if (buffered > 0)
+ return;
+
+ // Try to buffer up to 32 characters
+ readPos = 0;
+ uint8_t cmd[] = {'G', handle, sizeof(buffer)};
+ buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer)) - 1;
+ //err = buff[0]; // First byte is error code
+ if (buffered>0) {
+ // Shift the reminder of buffer
+ for (uint8_t i=0; i<buffered; i++)
+ buffer[i] = buffer[i+1];
+ }
+}
+
+int File::available() {
+ // Look if there is new data available
+ doBuffer();
+ return buffered;
+}
+
+void File::flush() {
+}
+
+//int read(void *buf, uint16_t nbyte)
+
+//uint32_t size()
+
+void File::close() {
+ if (mode == 255)
+ return;
+ uint8_t cmd[] = {'f', handle};
+ bridge.transfer(cmd, 2);
+ mode = 255;
+}
+
+const char *File::name() {
+ return filename.c_str();
+}
+
+
+boolean File::isDirectory() {
+ uint8_t res[1];
+ uint8_t lenght;
+ uint8_t cmd[] = {'i'};
+ if (mode != 255)
+ return 0;
+
+ bridge.transfer(cmd, 1, (uint8_t *)filename.c_str(), filename.length(), res, 1);
+ return res[0];
+}
+
+
+File File::openNextFile(uint8_t mode){
+ Process awk;
+ char tmp;
+ String command;
+ String filepath;
+ if (dirPosition == 0xFFFF) return File();
+
+ command = "ls ";
+ command += filename;
+ command += " | awk 'NR==";
+ command += dirPosition;
+ command += "'";
+
+ awk.runShellCommand(command);
+
+ while(awk.running());
+
+ command = "";
+
+ while (awk.available()){
+ tmp = awk.read();
+ if (tmp!='\n') command += tmp;
+ }
+ if (command.length() == 0)
+ return File();
+ dirPosition++;
+ filepath = filename + "/" + command;
+ return File(filepath.c_str(),mode);
+
+}
+
+void File::rewindDirectory(void){
+ dirPosition = 1;
+}
+
+
+
+
+
+
+boolean FileSystemClass::begin() {
+ return true;
+}
+
+File FileSystemClass::open(const char *filename, uint8_t mode) {
+ return File(filename, mode);
+}
+
+boolean FileSystemClass::exists(const char *filepath) {
+ Process ls;
+ ls.begin("ls");
+ ls.addParameter(filepath);
+ int res = ls.run();
+ return (res == 0);
+}
+
+boolean FileSystemClass::mkdir(const char *filepath) {
+ Process mk;
+ mk.begin("mkdir");
+ mk.addParameter("-p");
+ mk.addParameter(filepath);
+ int res = mk.run();
+ return (res == 0);
+}
+
+boolean FileSystemClass::remove(const char *filepath) {
+ Process rm;
+ rm.begin("rm");
+ rm.addParameter(filepath);
+ int res = rm.run();
+ return (res == 0);
+}
+
+boolean FileSystemClass::rmdir(const char *filepath) {
+ Process rm;
+ rm.begin("rmdir");
+ rm.addParameter(filepath);
+ int res = rm.run();
+ return (res == 0);
+}
+
+FileSystemClass FileSystem;
diff --git a/libraries/Bridge/FileIO.h b/libraries/Bridge/FileIO.h
new file mode 100644
index 0000000..0807287
--- /dev/null
+++ b/libraries/Bridge/FileIO.h
@@ -0,0 +1,103 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef __FILEIO_H__
+#define __FILEIO_H__
+
+#include <Process.h>
+
+#define FILE_READ 0
+#define FILE_WRITE 1
+#define FILE_APPEND 2
+
+class File : public Stream {
+
+public:
+ File(BridgeClass &b = Bridge);
+ File(const char *_filename, uint8_t _mode, BridgeClass &b = Bridge);
+ ~File();
+
+ virtual size_t write(uint8_t);
+ virtual size_t write(const uint8_t *buf, size_t size);
+ virtual int read();
+ virtual int peek();
+ virtual int available();
+ virtual void flush();
+ int read(void *buf, uint16_t nbyte);
+ boolean seek(uint32_t pos);
+ uint32_t position();
+ uint32_t size();
+ void close();
+ operator bool();
+ const char * name();
+ boolean isDirectory();
+ File openNextFile(uint8_t mode = FILE_READ);
+ void rewindDirectory(void);
+
+ //using Print::write;
+
+private:
+ void doBuffer();
+ uint8_t buffered;
+ uint8_t readPos;
+ uint16_t dirPosition;
+ static const int BUFFER_SIZE = 64;
+ uint8_t buffer[BUFFER_SIZE];
+
+
+private:
+ BridgeClass &bridge;
+ String filename;
+ uint8_t mode;
+ uint8_t handle;
+
+};
+
+class FileSystemClass {
+public:
+ FileSystemClass() : bridge(Bridge) { }
+ FileSystemClass(BridgeClass &_b) : bridge(_b) { }
+
+ boolean begin();
+
+ // Open the specified file/directory with the supplied mode (e.g. read or
+ // write, etc). Returns a File object for interacting with the file.
+ // Note that currently only one file can be open at a time.
+ File open(const char *filename, uint8_t mode = FILE_READ);
+
+ // Methods to determine if the requested file path exists.
+ boolean exists(const char *filepath);
+
+ // Create the requested directory heirarchy--if intermediate directories
+ // do not exist they will be created.
+ boolean mkdir(const char *filepath);
+
+ // Delete the file.
+ boolean remove(const char *filepath);
+
+ boolean rmdir(const char *filepath);
+
+private:
+ friend class File;
+
+ BridgeClass &bridge;
+};
+
+extern FileSystemClass FileSystem;
+
+#endif
diff --git a/libraries/Bridge/HttpClient.cpp b/libraries/Bridge/HttpClient.cpp
new file mode 100644
index 0000000..510af38
--- /dev/null
+++ b/libraries/Bridge/HttpClient.cpp
@@ -0,0 +1,53 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include "HttpClient.h"
+
+unsigned int HttpClient::get(String &url) {
+ begin("curl");
+ addParameter(url);
+ return run();
+}
+
+unsigned int HttpClient::get(const char *url) {
+ begin("curl");
+ addParameter(url);
+ return run();
+}
+
+void HttpClient::getAsynchronously(String &url) {
+ begin("curl");
+ addParameter(url);
+ runAsynchronously();
+}
+
+void HttpClient::getAsynchronously(const char *url) {
+ begin("curl");
+ addParameter(url);
+ runAsynchronously();
+}
+
+boolean HttpClient::ready() {
+ return running();
+}
+
+unsigned int HttpClient::getResult() {
+ return exitValue();
+}
+
+
diff --git a/libraries/Bridge/HttpClient.h b/libraries/Bridge/HttpClient.h
new file mode 100644
index 0000000..940a66d
--- /dev/null
+++ b/libraries/Bridge/HttpClient.h
@@ -0,0 +1,36 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef HTTPCLIENT_H_
+#define HTTPCLIENT_H_
+
+#include <Process.h>
+
+class HttpClient : public Process {
+public:
+
+ unsigned int get(String &url);
+ unsigned int get(const char * url);
+ void getAsynchronously(String &url);
+ void getAsynchronously(const char * url);
+ boolean ready();
+ unsigned int getResult();
+
+};
+
+#endif /* HTTPCLIENT_H_ */
diff --git a/libraries/Bridge/Mailbox.cpp b/libraries/Bridge/Mailbox.cpp
new file mode 100644
index 0000000..cf2b9e5
--- /dev/null
+++ b/libraries/Bridge/Mailbox.cpp
@@ -0,0 +1,56 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <Mailbox.h>
+
+unsigned int MailboxClass::readMessage(uint8_t *buff, unsigned int size) {
+ uint8_t tmp[] = { 'm' };
+ return bridge.transfer(tmp, 1, buff, size);
+}
+
+void MailboxClass::readMessage(String &str, unsigned int maxLength) {
+ uint8_t tmp[] = { 'm' };
+ // XXX: Is there a better way to create the string?
+ uint8_t buff[maxLength+1];
+ int l = bridge.transfer(tmp, 1, buff, maxLength);
+ buff[l] = 0;
+ str = (const char *)buff;
+}
+
+void MailboxClass::writeMessage(const uint8_t *buff, unsigned int size) {
+ uint8_t cmd[] = {'M'};
+ bridge.transfer(cmd, 1, buff, size, NULL, 0);
+}
+
+void MailboxClass::writeMessage(const String& str) {
+ writeMessage((uint8_t*) str.c_str(), str.length());
+}
+
+void MailboxClass::writeJSON(const String& str) {
+ uint8_t cmd[] = {'J'};
+ bridge.transfer(cmd, 1, (uint8_t*) str.c_str(), str.length(), NULL, 0);
+}
+
+unsigned int MailboxClass::messageAvailable() {
+ uint8_t tmp[] = {'n'};
+ uint8_t res[2];
+ bridge.transfer(tmp, 1, res, 2);
+ return (res[0] << 8) + res[1];
+}
+
+MailboxClass Mailbox(Bridge);
diff --git a/libraries/Bridge/Mailbox.h b/libraries/Bridge/Mailbox.h
new file mode 100644
index 0000000..35bd1d6
--- /dev/null
+++ b/libraries/Bridge/Mailbox.h
@@ -0,0 +1,53 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef _MAILBOX_CLASS_H_INCLUDED_
+#define _MAILBOX_CLASS_H_INCLUDED_
+
+#include <Bridge.h>
+
+class MailboxClass {
+public:
+ MailboxClass(BridgeClass &b = Bridge) : bridge(b) { }
+
+ void begin() { }
+ void end() { }
+
+ // Receive a message and store it inside a buffer
+ unsigned int readMessage(uint8_t *buffer, unsigned int size);
+ // Receive a message and store it inside a String
+ void readMessage(String &str, unsigned int maxLength=128);
+
+ // Send a message
+ void writeMessage(const uint8_t *buffer, unsigned int size);
+ // Send a message
+ void writeMessage(const String& str);
+ // Send a JSON message
+ void writeJSON(const String& str);
+
+ // Return the size of the next available message, 0 if there are
+ // no messages in queue.
+ unsigned int messageAvailable();
+
+private:
+ BridgeClass &bridge;
+};
+
+extern MailboxClass Mailbox;
+
+#endif // _MAILBOX_CLASS_H_INCLUDED_
diff --git a/libraries/Bridge/Process.cpp b/libraries/Bridge/Process.cpp
new file mode 100644
index 0000000..219922a
--- /dev/null
+++ b/libraries/Bridge/Process.cpp
@@ -0,0 +1,142 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <Process.h>
+
+Process::~Process() {
+ close();
+}
+
+size_t Process::write(uint8_t c) {
+ uint8_t cmd[] = {'I', handle, c};
+ bridge.transfer(cmd, 3);
+ return 1;
+}
+
+void Process::flush() {
+}
+
+int Process::available() {
+ // Look if there is new data available
+ doBuffer();
+ return buffered;
+}
+
+int Process::read() {
+ doBuffer();
+ if (buffered == 0)
+ return -1; // no chars available
+ else {
+ buffered--;
+ return buffer[readPos++];
+ }
+}
+
+int Process::peek() {
+ doBuffer();
+ if (buffered == 0)
+ return -1; // no chars available
+ else
+ return buffer[readPos];
+}
+
+void Process::doBuffer() {
+ // If there are already char in buffer exit
+ if (buffered > 0)
+ return;
+
+ // Try to buffer up to 32 characters
+ readPos = 0;
+ uint8_t cmd[] = {'O', handle, sizeof(buffer)};
+ buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer));
+}
+
+void Process::begin(const String &command) {
+ close();
+ cmdline = new String(command);
+}
+
+void Process::addParameter(const String &param) {
+ *cmdline += "\xFE";
+ *cmdline += param;
+}
+
+void Process::runAsynchronously() {
+ uint8_t cmd[] = {'R'};
+ uint8_t res[2];
+ bridge.transfer(cmd, 1, (uint8_t*)cmdline->c_str(), cmdline->length(), res, 2);
+ handle = res[1];
+
+ delete cmdline;
+ cmdline = NULL;
+
+ if (res[0]==0) // res[0] contains error code
+ started = true;
+}
+
+boolean Process::running() {
+ uint8_t cmd[] = {'r', handle};
+ uint8_t res[1];
+ bridge.transfer(cmd, 2, res, 1);
+ return (res[0] == 1);
+}
+
+unsigned int Process::exitValue() {
+ uint8_t cmd[] = {'W', handle};
+ uint8_t res[2];
+ bridge.transfer(cmd, 2, res, 2);
+ return (res[0] << 8) + res[1];
+}
+
+unsigned int Process::run() {
+ runAsynchronously();
+ while (running())
+ delay(100);
+ return exitValue();
+}
+
+void Process::close() {
+ if (started) {
+ uint8_t cmd[] = {'w', handle};
+ bridge.transfer(cmd, 2);
+ }
+ started = false;
+}
+
+unsigned int Process::runShellCommand(const String &command) {
+ runShellCommandAsynchronously(command);
+ while (running())
+ delay(100);
+ return exitValue();
+}
+
+void Process::runShellCommandAsynchronously(const String &command) {
+ begin("/bin/ash");
+ addParameter("-c");
+ addParameter(command);
+ runAsynchronously();
+}
+
+// This method is currently unused
+//static unsigned int __commandOutputAvailable(uint8_t handle) {
+// uint8_t cmd[] = {'o', handle};
+// uint8_t res[1];
+// Bridge.transfer(cmd, 2, res, 1);
+// return res[0];
+//}
+
diff --git a/libraries/Bridge/Process.h b/libraries/Bridge/Process.h
new file mode 100644
index 0000000..cacf516
--- /dev/null
+++ b/libraries/Bridge/Process.h
@@ -0,0 +1,69 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef PROCESS_H_
+#define PROCESS_H_
+
+#include <Bridge.h>
+
+class Process : public Stream {
+public:
+ // Constructor with a user provided BridgeClass instance
+ Process(BridgeClass &_b = Bridge) :
+ bridge(_b), started(false), buffered(0), readPos(0) { }
+ ~Process();
+
+ void begin(const String &command);
+ void addParameter(const String &param);
+ unsigned int run();
+ void runAsynchronously();
+ boolean running();
+ unsigned int exitValue();
+ void close();
+
+ unsigned int runShellCommand(const String &command);
+ void runShellCommandAsynchronously(const String &command);
+
+ operator bool () { return started; }
+
+ // Stream methods
+ // (read from process stdout)
+ int available();
+ int read();
+ int peek();
+ // (write to process stdin)
+ size_t write(uint8_t);
+ void flush();
+ // TODO: add optimized function for block write
+
+private:
+ BridgeClass &bridge;
+ unsigned int handle;
+ String *cmdline;
+ boolean started;
+
+private:
+ void doBuffer();
+ uint8_t buffered;
+ uint8_t readPos;
+ static const int BUFFER_SIZE = 64;
+ uint8_t buffer[BUFFER_SIZE];
+
+};
+
+#endif
diff --git a/libraries/Bridge/YunClient.cpp b/libraries/Bridge/YunClient.cpp
new file mode 100644
index 0000000..aaaf907
--- /dev/null
+++ b/libraries/Bridge/YunClient.cpp
@@ -0,0 +1,167 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <YunClient.h>
+
+YunClient::YunClient(int _h, BridgeClass &_b) :
+ bridge(_b), handle(_h), opened(true), buffered(0) {
+}
+
+YunClient::YunClient(BridgeClass &_b) :
+ bridge(_b), handle(0), opened(false), buffered(0) {
+}
+
+YunClient::~YunClient() {
+}
+
+YunClient& YunClient::operator=(const YunClient &_x) {
+ opened = _x.opened;
+ handle = _x.handle;
+ return *this;
+}
+
+void YunClient::stop() {
+ if (opened) {
+ uint8_t cmd[] = {'j', handle};
+ bridge.transfer(cmd, 2);
+ }
+ opened = false;
+}
+
+void YunClient::doBuffer() {
+ // If there are already char in buffer exit
+ if (buffered > 0)
+ return;
+
+ // Try to buffer up to 32 characters
+ readPos = 0;
+ uint8_t cmd[] = {'K', handle, sizeof(buffer)};
+ buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer));
+}
+
+int YunClient::available() {
+ // Look if there is new data available
+ doBuffer();
+ return buffered;
+}
+
+int YunClient::read() {
+ doBuffer();
+ if (buffered == 0)
+ return -1; // no chars available
+ else {
+ buffered--;
+ return buffer[readPos++];
+ }
+}
+
+int YunClient::read(uint8_t *buff, size_t size) {
+ int readed = 0;
+ do {
+ if (buffered == 0) {
+ doBuffer();
+ if (buffered == 0)
+ return readed;
+ }
+ buff[readed++] = buffer[readPos++];
+ buffered--;
+ } while (readed < size);
+ return readed;
+}
+
+int YunClient::peek() {
+ doBuffer();
+ if (buffered == 0)
+ return -1; // no chars available
+ else
+ return buffer[readPos];
+}
+
+size_t YunClient::write(uint8_t c) {
+ if (!opened)
+ return 0;
+ uint8_t cmd[] = {'l', handle, c};
+ bridge.transfer(cmd, 3);
+ return 1;
+}
+
+size_t YunClient::write(const uint8_t *buf, size_t size) {
+ if (!opened)
+ return 0;
+ uint8_t cmd[] = {'l', handle};
+ bridge.transfer(cmd, 2, buf, size, NULL, 0);
+ return size;
+}
+
+void YunClient::flush() {
+}
+
+uint8_t YunClient::connected() {
+ if (!opened)
+ return false;
+ uint8_t cmd[] = {'L', handle};
+ uint8_t res[1];
+ bridge.transfer(cmd, 2, res, 1);
+ return (res[0] == 1);
+}
+
+int YunClient::connect(IPAddress ip, uint16_t port) {
+ String address;
+ address.reserve(18);
+ address += ip[0];
+ address += '.';
+ address += ip[1];
+ address += '.';
+ address += ip[2];
+ address += '.';
+ address += ip[3];
+ return connect(address.c_str(), port);
+}
+
+int YunClient::connect(const char *host, uint16_t port) {
+ uint8_t tmp[] = {
+ 'C',
+ (port >> 8) & 0xFF,
+ port & 0xFF
+ };
+ uint8_t res[1];
+ int l = bridge.transfer(tmp, 3, (const uint8_t *)host, strlen(host), res, 1);
+ if (l==0)
+ return 0;
+ handle = res[0];
+
+ // wait for connection
+ uint8_t tmp2[] = { 'c', handle };
+ uint8_t res2[1];
+ while (true) {
+ bridge.transfer(tmp2, 2, res2, 1);
+ if (res2[0] == 0)
+ break;
+ delay(1);
+ }
+ opened = true;
+
+ // check for successful connection
+ if (connected())
+ return 1;
+
+ opened = false;
+ handle = 0;
+ return 0;
+}
+
diff --git a/libraries/Bridge/YunClient.h b/libraries/Bridge/YunClient.h
new file mode 100644
index 0000000..59e3a0c
--- /dev/null
+++ b/libraries/Bridge/YunClient.h
@@ -0,0 +1,68 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef _YUN_CLIENT_H_
+#define _YUN_CLIENT_H_
+
+#include <Bridge.h>
+#include <Client.h>
+
+class YunClient : public Client {
+public:
+ // Constructor with a user provided BridgeClass instance
+ YunClient(int _h, BridgeClass &_b = Bridge);
+ YunClient(BridgeClass &_b = Bridge);
+ ~YunClient();
+
+ // Stream methods
+ // (read message)
+ virtual int available();
+ virtual int read();
+ virtual int read(uint8_t *buf, size_t size);
+ virtual int peek();
+ // (write response)
+ virtual size_t write(uint8_t);
+ virtual size_t write(const uint8_t *buf, size_t size);
+ virtual void flush();
+ // TODO: add optimized function for block write
+
+ virtual operator bool () { return opened; }
+
+ YunClient& operator=(const YunClient &_x);
+
+ virtual void stop();
+ virtual uint8_t connected();
+
+ virtual int connect(IPAddress ip, uint16_t port);
+ virtual int connect(const char *host, uint16_t port);
+
+private:
+ BridgeClass &bridge;
+ unsigned int handle;
+ boolean opened;
+
+private:
+ void doBuffer();
+ uint8_t buffered;
+ uint8_t readPos;
+ static const int BUFFER_SIZE = 64;
+ uint8_t buffer[BUFFER_SIZE];
+
+};
+
+#endif // _YUN_CLIENT_H_
diff --git a/libraries/Bridge/YunServer.cpp b/libraries/Bridge/YunServer.cpp
new file mode 100644
index 0000000..3473ce8
--- /dev/null
+++ b/libraries/Bridge/YunServer.cpp
@@ -0,0 +1,54 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <YunServer.h>
+#include <YunClient.h>
+
+YunServer::YunServer(uint16_t _p, BridgeClass &_b) :
+ bridge(_b), port(_p), listening(false), useLocalhost(false) {
+}
+
+void YunServer::begin() {
+ uint8_t tmp[] = {
+ 'N',
+ (port >> 8) & 0xFF,
+ port & 0xFF
+ };
+ uint8_t res[1];
+ String address = F("127.0.0.1");
+ if (!useLocalhost)
+ address = F("0.0.0.0");
+ bridge.transfer(tmp, 3, (const uint8_t *)address.c_str(), address.length(), res, 1);
+ listening = (res[0] == 1);
+}
+
+YunClient YunServer::accept() {
+ uint8_t cmd[] = {'k'};
+ uint8_t res[1];
+ unsigned int l = bridge.transfer(cmd, 1, res, 1);
+ if (l==0)
+ return YunClient();
+ return YunClient(res[0]);
+}
+
+size_t YunServer::write(uint8_t c) {
+ uint8_t cmd[] = { 'b', c };
+ bridge.transfer(cmd, 2);
+ return 1;
+}
+
diff --git a/libraries/Bridge/YunServer.h b/libraries/Bridge/YunServer.h
new file mode 100644
index 0000000..69fdeab
--- /dev/null
+++ b/libraries/Bridge/YunServer.h
@@ -0,0 +1,47 @@
+/*
+ Copyright (c) 2013 Arduino LLC. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef _YUN_SERVER_H_
+#define _YUN_SERVER_H_
+
+#include <Bridge.h>
+#include <Server.h>
+
+class YunClient;
+
+class YunServer : public Server {
+public:
+ // Constructor with a user provided BridgeClass instance
+ YunServer(uint16_t port = 5555, BridgeClass &_b = Bridge);
+
+ void begin();
+ YunClient accept();
+
+ virtual size_t write(uint8_t c);
+
+ void listenOnLocalhost() { useLocalhost = true; }
+ void noListenOnLocalhost() { useLocalhost = false; }
+
+private:
+ uint16_t port;
+ bool listening;
+ bool useLocalhost;
+ BridgeClass &bridge;
+};
+
+#endif // _YUN_SERVER_H_
diff --git a/libraries/Bridge/examples/Bridge/Bridge.ino b/libraries/Bridge/examples/Bridge/Bridge.ino
new file mode 100644
index 0000000..277982a
--- /dev/null
+++ b/libraries/Bridge/examples/Bridge/Bridge.ino
@@ -0,0 +1,175 @@
+
+// Possible commands are listed here:
+//
+// "digital/13" -> digitalRead(13)
+// "digital/13/1" -> digitalWrite(13, HIGH)
+// "analog/2/123" -> analogWrite(2, 123)
+// "analog/2" -> analogRead(2)
+// "mode/13/input" -> pinMode(13, INPUT)
+// "mode/13/output" -> pinMode(13, OUTPUT)
+
+#include <Bridge.h>
+#include <YunServer.h>
+#include <YunClient.h>
+
+// Listen on default port 5555, the webserver on the Yun
+// will forward there all the HTTP requests for us.
+YunServer server;
+
+void setup() {
+ Serial.begin(9600);
+
+ // Bridge startup
+ pinMode(13,OUTPUT);
+ digitalWrite(13, LOW);
+ Bridge.begin();
+ digitalWrite(13, HIGH);
+
+ // Listen for incoming connection only from localhost
+ // (no one from the external network could connect)
+ server.listenOnLocalhost();
+ server.begin();
+}
+
+void loop() {
+ // Get clients coming from server
+ YunClient client = server.accept();
+
+ // There is a new client?
+ if (client) {
+ // Process request
+ process(client);
+
+ // Close connection and free resources.
+ client.stop();
+ }
+
+ delay(50); // Poll every 50ms
+}
+
+void process(YunClient client) {
+ // read the command
+ String command = client.readStringUntil('/');
+
+ // is "digital" command?
+ if (command == "digital") {
+ digitalCommand(client);
+ }
+
+ // is "analog" command?
+ if (command == "analog") {
+ analogCommand(client);
+ }
+
+ // is "mode" command?
+ if (command == "mode") {
+ modeCommand(client);
+ }
+}
+
+void digitalCommand(YunClient client) {
+ int pin, value;
+
+ // Read pin number
+ pin = client.parseInt();
+
+ // If the next character is a '/' it means we have an URL
+ // with a value like: "/digital/13/1"
+ if (client.read() == '/') {
+ value = client.parseInt();
+ digitalWrite(pin, value);
+ }
+ else {
+ value = digitalRead(pin);
+ }
+
+ // Send feedback to client
+ client.print(F("Pin D"));
+ client.print(pin);
+ client.print(F(" set to "));
+ client.println(value);
+
+ // Update datastore key with the current pin value
+ String key = "D";
+ key += pin;
+ Bridge.put(key, String(value));
+}
+
+void analogCommand(YunClient client) {
+ int pin, value;
+
+ // Read pin number
+ pin = client.parseInt();
+
+ // If the next character is a '/' it means we have an URL
+ // with a value like: "/analog/5/120"
+ if (client.read() == '/') {
+ // Read value and execute command
+ value = client.parseInt();
+ analogWrite(pin, value);
+
+ // Send feedback to client
+ client.print(F("Pin D"));
+ client.print(pin);
+ client.print(F(" set to analog "));
+ client.println(value);
+
+ // Update datastore key with the current pin value
+ String key = "D";
+ key += pin;
+ Bridge.put(key, String(value));
+ }
+ else {
+ // Read analog pin
+ value = analogRead(pin);
+
+ // Send feedback to client
+ client.print(F("Pin A"));
+ client.print(pin);
+ client.print(F(" reads analog "));
+ client.println(value);
+
+ // Update datastore key with the current pin value
+ String key = "A";
+ key += pin;
+ Bridge.put(key, String(value));
+ }
+}
+
+void modeCommand(YunClient client) {
+ int pin;
+
+ // Read pin number
+ pin = client.parseInt();
+
+ // If the next character is not a '/' we have a malformed URL
+ if (client.read() != '/') {
+ client.println(F("error"));
+ return;
+ }
+
+ String mode = client.readStringUntil('\r');
+
+ if (mode == "input") {
+ pinMode(pin, INPUT);
+ // Send feedback to client
+ client.print(F("Pin D"));
+ client.print(pin);
+ client.print(F(" configured as INPUT!"));
+ return;
+ }
+
+ if (mode == "output") {
+ pinMode(pin, OUTPUT);
+ // Send feedback to client
+ client.print(F("Pin D"));
+ client.print(pin);
+ client.print(F(" configured as OUTPUT!"));
+ return;
+ }
+
+ client.print(F("error: invalid mode "));
+ client.print(mode);
+}
+
+
diff --git a/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino b/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino
new file mode 100644
index 0000000..4cdf4c1
--- /dev/null
+++ b/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino
@@ -0,0 +1,94 @@
+/*
+ ASCII table
+
+ Prints out byte values in all possible formats:
+ * as raw binary values
+ * as ASCII-encoded decimal, hex, octal, and binary values
+
+ For more on ASCII, see http://www.asciitable.com and http://en.wikipedia.org/wiki/ASCII
+
+ The circuit: No external hardware needed.
+
+ created 2006
+ by Nicholas Zambetti
+ modified 9 Apr 2012
+ by Tom Igoe
+ modified 22 May 2013
+ by Cristian Maglie
+
+ This example code is in the public domain.
+
+ <http://www.zambetti.com>
+
+ */
+
+#include <Console.h>
+
+void setup() {
+ //Initialize Console and wait for port to open:
+ Bridge.begin();
+ Console.begin();
+
+ // Uncomment the following line to enable buffering:
+ // - better transmission speed and efficiency
+ // - needs to call Console.flush() to ensure that all
+ // transmitted data is sent
+
+ //Console.buffer(64);
+
+ while (!Console) {
+ ; // wait for Console port to connect.
+ }
+
+ // prints title with ending line break
+ Console.println("ASCII Table ~ Character Map");
+}
+
+// first visible ASCIIcharacter '!' is number 33:
+int thisByte = 33;
+// you can also write ASCII characters in single quotes.
+// for example. '!' is the same as 33, so you could also use this:
+//int thisByte = '!';
+
+void loop() {
+ // prints value unaltered, i.e. the raw binary version of the
+ // byte. The Console monitor interprets all bytes as
+ // ASCII, so 33, the first number, will show up as '!'
+ Console.write(thisByte);
+
+ Console.print(", dec: ");
+ // prints value as string as an ASCII-encoded decimal (base 10).
+ // Decimal is the default format for Console.print() and Console.println(),
+ // so no modifier is needed:
+ Console.print(thisByte);
+ // But you can declare the modifier for decimal if you want to.
+ //this also works if you uncomment it:
+
+ // Console.print(thisByte, DEC);
+
+ Console.print(", hex: ");
+ // prints value as string in hexadecimal (base 16):
+ Console.print(thisByte, HEX);
+
+ Console.print(", oct: ");
+ // prints value as string in octal (base 8);
+ Console.print(thisByte, OCT);
+
+ Console.print(", bin: ");
+ // prints value as string in binary (base 2)
+ // also prints ending line break:
+ Console.println(thisByte, BIN);
+
+ // if printed last visible character '~' or 126, stop:
+ if(thisByte == 126) { // you could also use if (thisByte == '~') {
+ // ensure the latest bit of data is sent
+ Console.flush();
+
+ // This loop loops forever and does nothing
+ while(true) {
+ continue;
+ }
+ }
+ // go on to the next character
+ thisByte++;
+}
diff --git a/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino b/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino
new file mode 100644
index 0000000..c962b6e
--- /dev/null
+++ b/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino
@@ -0,0 +1,62 @@
+/*
+ Console Pixel
+
+ An example of using the Arduino board to receive data from the
+ Console on the Arduino Yun. In this case, the Arduino boards turns on an LED when
+ it receives the character 'H', and turns off the LED when it
+ receives the character 'L'.
+
+ To see the Console, pick your Yún's name and IP address in the Port menu
+ then open the Port Monitor. You can also see it by opening a terminal window
+ and typing
+ ssh root@ yourYunsName.local 'telnet localhost 6571'
+ then pressing enter. When prompted for the password, enter it.
+
+
+ The circuit:
+ * LED connected from digital pin 13 to ground
+
+ created 2006
+ by David A. Mellis
+ modified 25 Jun 2013
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ */
+
+#include <Console.h>
+
+const int ledPin = 13; // the pin that the LED is attached to
+char incomingByte; // a variable to read incoming Console data into
+
+void setup() {
+ Bridge.begin(); // Initialize Bridge
+ Console.begin(); // Initialize Console
+
+ // Wait for the Console port to connect
+ while(!Console);
+
+ Console.println("type H or L to turn pin 13 on or off");
+
+ // initialize the LED pin as an output:
+ pinMode(ledPin, OUTPUT);
+}
+
+void loop() {
+ // see if there's incoming Console data:
+ if (Console.available() > 0) {
+ // read the oldest byte in the Console buffer:
+ incomingByte = Console.read();
+ Console.println(incomingByte);
+ // if it's a capital H (ASCII 72), turn on the LED:
+ if (incomingByte == 'H') {
+ digitalWrite(ledPin, HIGH);
+ }
+ // if it's an L (ASCII 76) turn off the LED:
+ if (incomingByte == 'L') {
+ digitalWrite(ledPin, LOW);
+ }
+ }
+}
+
diff --git a/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino b/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino
new file mode 100644
index 0000000..0019c20
--- /dev/null
+++ b/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino
@@ -0,0 +1,56 @@
+/*
+ Console Read example
+
+ Read data coming from bridge using the Console.read() function
+ and store it in a string.
+
+ To see the Console, pick your Yún's name and IP address in the Port menu
+ then open the Port Monitor. You can also see it by opening a terminal window
+ and typing:
+ ssh root@ yourYunsName.local 'telnet localhost 6571'
+ then pressing enter. When prompted for the password, enter it.
+
+ created 13 Jun 2013
+ by Angelo Scialabba
+ modified 16 June 2013
+ by Tom Igoe
+
+ This example code is in the public domain.
+ */
+
+#include <Console.h>
+
+String name;
+
+void setup() {
+ // Initialize Console and wait for port to open:
+ Bridge.begin();
+ Console.begin();
+
+ // Wait for Console port to connect
+ while (!Console);
+
+ Console.println("Hi, what's your name?");
+}
+
+void loop() {
+ if (Console.available() > 0) {
+ char c = Console.read(); // read the next char received
+ // look for the newline character, this is the last character in the string
+ if (c == '\n') {
+ //print text with the name received
+ Console.print("Hi ");
+ Console.print(name);
+ Console.println("! Nice to meet you!");
+ Console.println();
+ // Ask again for name and clear the old name
+ Console.println("Hi, what's your name?");
+ name = ""; // clear the name string
+ }
+ else { // if the buffer is empty Cosole.read() returns -1
+ name += c; // append the read char from Console to the name string
+ }
+ }
+}
+
+
diff --git a/libraries/Bridge/examples/Datalogger/Datalogger.ino b/libraries/Bridge/examples/Datalogger/Datalogger.ino
new file mode 100644
index 0000000..2d792a4
--- /dev/null
+++ b/libraries/Bridge/examples/Datalogger/Datalogger.ino
@@ -0,0 +1,99 @@
+/*
+ SD card datalogger
+
+ This example shows how to log data from three analog sensors
+ to an SD card mounted on the Arduino Yún using the Bridge library.
+
+ The circuit:
+ * analog sensors on analog pins 0, 1 and 2
+ * SD card attached to SD card slot of the Arduino Yún
+
+ Prepare your SD card creating an empty folder in the SD root
+ named "arduino". This will ensure that the Yún will create a link
+ to the SD to the "/mnt/sd" path.
+
+ You can remove the SD card while the Linux and the
+ sketch are running but be careful not to remove it while
+ the system is writing to it.
+
+ created 24 Nov 2010
+ modified 9 Apr 2012
+ by Tom Igoe
+ adapted to the Yún Bridge library 20 Jun 2013
+ by Federico Vanzati
+ modified 21 Jun 2013
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ */
+
+#include <FileIO.h>
+
+void setup() {
+ // Initialize the Bridge and the Serial
+ Bridge.begin();
+ Serial.begin(9600);
+ FileSystem.begin();
+
+ while(!Serial); // wait for Serial port to connect.
+ Serial.println("Filesystem datalogger\n");
+}
+
+
+void loop () {
+ // make a string that start with a timestamp for assembling the data to log:
+ String dataString;
+ dataString += getTimeStamp();
+ dataString += " = ";
+
+ // read three sensors and append to the string:
+ for (int analogPin = 0; analogPin < 3; analogPin++) {
+ int sensor = analogRead(analogPin);
+ dataString += String(sensor);
+ if (analogPin < 2) {
+ dataString += ","; // separate the values with a comma
+ }
+ }
+
+ // open the file. note that only one file can be open at a time,
+ // so you have to close this one before opening another.
+ // The FileSystem card is mounted at the following "/mnt/FileSystema1"
+ File dataFile = FileSystem.open("/mnt/sd/datalog.txt", FILE_APPEND);
+
+ // if the file is available, write to it:
+ if (dataFile) {
+ dataFile.println(dataString);
+ dataFile.close();
+ // print to the serial port too:
+ Serial.println(dataString);
+ }
+ // if the file isn't open, pop up an error:
+ else {
+ Serial.println("error opening datalog.txt");
+ }
+
+ delay(15000);
+
+}
+
+// This function return a string with the time stamp
+String getTimeStamp() {
+ String result;
+ Process time;
+ // date is a command line utility to get the date and the time
+ // in different formats depending on the additional parameter
+ time.begin("date");
+ time.addParameter("+%D-%T"); // parameters: D for the complete date mm/dd/yy
+ // T for the time hh:mm:ss
+ time.run(); // run the command
+
+ // read the output of the command
+ while(time.available()>0) {
+ char c = time.read();
+ if(c != '\n')
+ result += c;
+ }
+
+ return result;
+}
diff --git a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino b/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino
new file mode 100644
index 0000000..b550db2
--- /dev/null
+++ b/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino
@@ -0,0 +1,82 @@
+/*
+ Write to file using FileIO classes.
+
+ This sketch demonstrate how to write file into the Yún filesystem.
+ A shell script file is created in /tmp, and it is executed afterwards.
+
+ created 7 June 2010
+ by Cristian Maglie
+
+ This example code is in the public domain.
+
+ */
+
+#include <FileIO.h>
+
+void setup() {
+ // Setup Bridge (needed every time we communicate with the Arduino Yún)
+ Bridge.begin();
+ // Initialize the Serial
+ Serial.begin(9600);
+
+ while(!Serial); // wait for Serial port to connect.
+ Serial.println("File Write Script example\n\n");
+
+ // Setup File IO
+ FileSystem.begin();
+
+ // Upload script used to gain network statistics
+ uploadScript();
+}
+
+void loop() {
+ // Run stats script every 5 secs.
+ runScript();
+ delay(5000);
+}
+
+// this function creates a file into the linux processor that contains a shell script
+// to check the network traffic of the WiFi interface
+void uploadScript() {
+ // Write our shell script in /tmp
+ // Using /tmp stores the script in RAM this way we can preserve
+ // the limited amount of FLASH erase/write cycles
+ File script = FileSystem.open("/tmp/wlan-stats.sh", FILE_WRITE);
+ // Shell script header
+ script.print("#!/bin/sh\n");
+ // shell commands:
+ // ifconfig: is a command line utility for controlling the network interfaces.
+ // wlan0 is the interface we want to query
+ // grep: search inside the output of the ifconfig command the "RX bytes" keyword
+ // and extract the line that contains it
+ script.print("ifconfig wlan0 | grep 'RX bytes'\n");
+ script.close(); // close the file
+
+ // Make the script executable
+ Process chmod;
+ chmod.begin("chmod"); // chmod: change mode
+ chmod.addParameter("+x"); // x stays for executable
+ chmod.addParameter("/tmp/wlan-stats.sh"); // path to the file to make it executable
+ chmod.run();
+}
+
+
+// this function run the script and read the output data
+void runScript() {
+ // Run the script and show results on the Serial
+ Process myscript;
+ myscript.begin("/tmp/wlan-stats.sh");
+ myscript.run();
+
+ String output = "";
+
+ // read the output of the script
+ while (myscript.available()) {
+ output += (char)myscript.read();
+ }
+ // remove the blank spaces at the beginning and the ending of the string
+ output.trim();
+ Serial.println(output);
+ Serial.flush();
+}
+
diff --git a/libraries/Bridge/examples/HttpClient/HttpClient.ino b/libraries/Bridge/examples/HttpClient/HttpClient.ino
new file mode 100644
index 0000000..4104ef4
--- /dev/null
+++ b/libraries/Bridge/examples/HttpClient/HttpClient.ino
@@ -0,0 +1,26 @@
+
+#include <Bridge.h>
+#include <HttpClient.h>
+
+void setup() {
+ pinMode(13, OUTPUT);
+ digitalWrite(13, LOW);
+ Bridge.begin();
+ Serial.begin(9600);
+ while(!Serial);
+}
+
+void loop() {
+ HttpClient client;
+ client.get("http://arduino.cc/asciilogo.txt");
+
+ while (client.available()) {
+ char c = client.read();
+ Serial.print(c);
+ }
+ Serial.flush();
+
+ delay(5000);
+}
+
+
diff --git a/libraries/Bridge/examples/Process/Process.ino b/libraries/Bridge/examples/Process/Process.ino
new file mode 100644
index 0000000..7646d15
--- /dev/null
+++ b/libraries/Bridge/examples/Process/Process.ino
@@ -0,0 +1,70 @@
+/*
+ Running process using Process class.
+
+ This sketch demonstrate how to run linux processes
+ using an Arduino Yún.
+
+ created 5 Jun 2013
+ by Cristian Maglie
+
+ This example code is in the public domain.
+
+ */
+
+#include <Process.h>
+
+void setup() {
+ // Initialize Bridge
+ Bridge.begin();
+
+ // Initialize Serial
+ Serial.begin(9600);
+
+ // Wait until a Serial Monitor is connected.
+ while (!Serial);
+
+ // run various example processes
+ runCurl();
+ runCpuInfo();
+}
+
+void loop() {
+ // Do nothing here.
+}
+
+void runCurl() {
+ // Launch "curl" command and get Arduino ascii art logo from the network
+ // curl is command line program for transferring data using different internet protocols
+ Process p; // Create a process and call it "p"
+ p.begin("curl"); // Process that launch the "curl" command
+ p.addParameter("http://arduino.cc/asciilogo.txt"); // Add the URL parameter to "curl"
+ p.run(); // Run the process and wait for its termination
+
+ // Print arduino logo over the Serial
+ // A process output can be read with the stream methods
+ while (p.available()>0) {
+ char c = p.read();
+ Serial.print(c);
+ }
+ // Ensure the last bit of data is sent.
+ Serial.flush();
+}
+
+void runCpuInfo() {
+ // Launch "cat /proc/cpuinfo" command (shows info on Atheros CPU)
+ // cat is a command line utility that shows the content of a file
+ Process p; // Create a process and call it "p"
+ p.begin("cat"); // Process that launch the "cat" command
+ p.addParameter("/proc/cpuinfo"); // Add the cpuifo file path as parameter to cut
+ p.run(); // Run the process and wait for its termination
+
+ // Print command output on the Serial.
+ // A process output can be read with the stream methods
+ while (p.available()>0) {
+ char c = p.read();
+ Serial.print(c);
+ }
+ // Ensure the last bit of data is sent.
+ Serial.flush();
+}
+
diff --git a/libraries/Bridge/examples/ShellCommands/ShellCommands.ino b/libraries/Bridge/examples/ShellCommands/ShellCommands.ino
new file mode 100644
index 0000000..5a4c291
--- /dev/null
+++ b/libraries/Bridge/examples/ShellCommands/ShellCommands.ino
@@ -0,0 +1,53 @@
+/*
+ Running shell commands using Process class.
+
+ This sketch demonstrate how to run linux shell commands
+ using an Arduino Yún. It runs the wifiCheck script on the linino side
+ of the Yun, then uses grep to get just the signal strength line.
+ Then it uses parseInt() to read the wifi signal strength as an integer,
+ and finally uses that number to fade an LED using analogWrite().
+
+ The circuit:
+ * Arduino Yun with LED connected to pin 9
+
+ created 12 Jun 2013
+ by Cristian Maglie
+ modified 25 June 2013
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ */
+
+#include <Process.h>
+
+void setup() {
+ Bridge.begin(); // Initialize the Bridge
+ Serial.begin(9600); // Initialize the Serial
+
+ // Wait until a Serial Monitor is connected.
+ while(!Serial);
+}
+
+void loop() {
+ Process p;
+ // This command line runs the WifiStatus script, (/usr/bin/pretty-wifi-info.lua), then
+ // sends the result to the grep command to look for a line containing the word
+ // "Signal:" the result is passed to this sketch:
+ p.runShellCommand("/usr/bin/pretty-wifi-info.lua | grep Signal");
+
+ // do nothing until the process finishes, so you get the whole output:
+ while(p.running());
+
+ // Read command output. runShellCommand() should have passed "Signal: xx&":
+ while (p.available()) {
+ int result = p.parseInt(); // look for an integer
+ int signal = map(result, 0, 100, 0, 255); // map result from 0-100 range to 0-255
+ analogWrite(9, signal); // set the brightness of LED on pin 9
+ Serial.println(result); // print the number as well
+ }
+ delay(5000); // wait 5 seconds before you do it again
+}
+
+
+
diff --git a/libraries/Bridge/examples/SpacebrewYun/input_output/input_output.ino b/libraries/Bridge/examples/SpacebrewYun/input_output/input_output.ino
new file mode 100644
index 0000000..e95457f
--- /dev/null
+++ b/libraries/Bridge/examples/SpacebrewYun/input_output/input_output.ino
@@ -0,0 +1,98 @@
+#include <Bridge.h>
+#include <SpacebrewYun.h>
+
+/**
+ * Arduino Yun Spacebrew Library Example
+ *
+ * This example code is in the public domain.
+ *
+ * @date July 16, 2013
+ * @author Julio Terra
+ *
+ */
+
+SpacebrewYun sb = SpacebrewYun("aYun", "Arduino Yun spacebrew test");
+
+int counter = 0;
+long last = 0;
+int interval = 2000;
+
+void setup() {
+
+ Serial.begin(57600);
+ delay(4000);
+ while (!Serial) { Serial.println("connecting"); }
+
+
+ //Initialize Console and wait for port to open:
+ Bridge.begin();
+ Serial.println("Bridge Started");
+
+ Serial.println("Configuring Spacebrew Client");
+ sb.verbose(true);
+ sb.addPublish("string test", "string");
+ sb.addPublish("range test", "range");
+ sb.addPublish("boolean test", "boolean");
+ sb.addPublish("custom test", "crazy");
+ sb.addSubscribe("string test", "string");
+ sb.addSubscribe("range test", "range");
+ sb.addSubscribe("boolean test", "boolean");
+ sb.addSubscribe("custom test", "crazy");
+ sb.onRangeMessage(handleRange);
+ sb.onStringMessage(handleString);
+ sb.onBooleanMessage(handleBoolean);
+ sb.onCustomMessage(handleCustom);
+ sb.connect("sandbox.spacebrew.cc");
+
+}
+
+
+void loop() {
+ sb.monitor();
+ if ( sb.connected() ) {
+ if ( (millis() - last) > interval ) {
+ String test_str_msg = "testing, testing, ";
+ test_str_msg += counter;
+ counter ++;
+
+ sb.send("string test", test_str_msg);
+ sb.send("range test", 500);
+ sb.send("boolean test", true);
+ sb.send("custom test", "youre loco");
+
+ last = millis();
+
+ }
+ }
+}
+
+void handleRange (String route, int value) {
+ Serial.print("Range msg ");
+ Serial.print(route);
+ Serial.print(", value ");
+ Serial.println(value);
+}
+
+void handleString (String route, String value) {
+ Serial.print("String msg ");
+ Serial.print(route);
+ Serial.print(", value ");
+ Serial.println(value);
+}
+
+void handleBoolean (String route, boolean value) {
+ Serial.print("Boolen msg ");
+ Serial.print(route);
+ Serial.print(", value ");
+ Serial.println(value ? "true" : "false");
+}
+
+void handleCustom (String route, String value, String type) {
+ Serial.print("Custom msg ");
+ Serial.print(route);
+ Serial.print(" of type ");
+ Serial.print(type);
+ Serial.print(", value ");
+ Serial.println(value);
+}
+
diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino
new file mode 100644
index 0000000..6543935
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino
@@ -0,0 +1,443 @@
+/*
+ ControlBySMS
+
+ Demonstrates using an SMS message to a Twilio account to turn an LED
+ on the Yun board on and off using the Temboo Arduino Yun SDK.
+ Sending a SMS with the text "LED ON" to your Twilio phone number
+ will turn on the LED on the Yun. Sending "LED OFF" will turn it off.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ Since this sketch uses Twilio to retrieve the SMS, you'll also need a valid
+ Twilio account. You can create one for free at https://www.twilio.com.
+
+ The sketch needs your Twilio Account SID and Auth Token you get when you
+ register with Twilio. Make sure to use the Account SID and Auth Token from
+ your Twilio Dashboard (not your test credentials from the Dev Tools panel).
+
+ Normally, Twilio expects to contact a web site you provide to get a response
+ when an SMS message is received for your Twilio number. In this case, we
+ don't want to send any response (and we don't want to have to set up a web
+ site just to receive SMS messages.) You can use a URL that Twilio provides
+ for this purpose. When a message is received and sent to the Twilio "twimlets"
+ URL, it returns a code meaning "no response required." To set this up:
+
+ 1. Log in to your Twilio account and go to this URL:
+
+ https://www.twilio.com/user/account/phone-numbers/incoming
+
+ 2. Select the Twilio number you want to receive SMS messages at.
+
+ 3. Put this URL in the "SMS Request URL" field:
+
+ http://twimlets.com/echo?Twiml=%3CResponse%3E%3C%2FResponse%3E
+
+ See this link to Twilio's FAQ for details:
+
+ https://www.twilio.com/help/faq/sms/how-can-i-receive-sms-messages-without-responding
+
+ 4. Click the "Save Changes" button at the bottom of the page.
+
+ Your account will now receive SMS messages, but won't send any responses.
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+ to the Internet.
+
+ Looking for another API? We've got over 100 in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+
+// the Account SID from your Twilio account
+const String TWILIO_ACCOUNT_SID = "xxxxxxxxxxxxxxxxxx";
+
+// the Auth Token from your Twilio account
+const String TWILIO_AUTH_TOKEN = "xxxxxxxxxxxxxxxxx";
+
+// only act on messages sent from this phone number. (e.g. 15415551212)
+const String FROM_PHONE_NUMBER = "xxxxxxxxxxx";
+
+// how often (in milliseconds) to check for new SMS messages.
+const unsigned long SMS_CHECK_PERIOD = 60000;
+
+// keep track of when we last checked for new messages
+// (initialize it to SMS_CHECK_PERIOD seconds ago so
+// we do the first check as soon as the sketch starts.)
+unsigned long lastSMSCheckTime = -SMS_CHECK_PERIOD;
+
+// keep track of the ID of the last SMS message we processed.
+// (we only need to process newer messages)
+String lastSid;
+
+// we'll be turning the LED built in to the Yun on and off
+// to simulate controlling some device. That LED is on pin 13.
+int LED_PIN = 13;
+
+int numRuns = 1; // execution count, so this doesn't run forever
+int maxRuns = 10; // the max number of times the Twitter HomeTimeline Choreo should run
+
+
+void setup() {
+ Serial.begin(9600);
+
+ // for debugging, wait until a serial console is connected
+ delay(4000);
+ while(!Serial);
+
+ // tell the board to treat the LED pin as an output.
+ pinMode(LED_PIN, OUTPUT);
+
+ // start with the LED off
+ digitalWrite(LED_PIN, LOW);
+
+ // initialize the connection to the Linino processor.
+ Bridge.begin();
+
+ // Twilio will report old SMS messages. We want to
+ // ignore any existing control messages when we start.
+ Serial.println("Ignoring any existing control messages...");
+ checkForMessages(true);
+
+}
+
+void loop()
+{
+
+ // get the number of milliseconds the CPU has been running.
+ unsigned long now = millis();
+
+ // see if it's time to check for new SMS messages.
+ if (now - lastSMSCheckTime >= SMS_CHECK_PERIOD) {
+
+ // it's time to check for new messages
+ // save this time so we know when to check next
+ lastSMSCheckTime = now;
+
+ if (numRuns <= maxRuns) {
+ Serial.println("Checking for new SMS messages - Run #" + String(numRuns++));
+
+ // execute the choreo and don't ignore control messages.
+ checkForMessages(false);
+ } else {
+ Serial.println("Already ran " + String(maxRuns) + " times.");
+ }
+ }
+}
+
+/*
+This function executes the Twilio > SMSMessages > ListMessages choreo
+and processes the results.
+
+If ignoreCommands is 'true', this function will read and process messages
+updating 'lastSid', but will not actually take any action on any commands
+found. This is so we can ignore any old control messages when we start.
+
+If ignoreCommands is 'false', control messages WILL be acted on.
+*/
+void checkForMessages(bool ignoreCommands) {
+
+ // we need a TembooChoreo object to send a Choreo request to Temboo
+ TembooChoreo ListMessagesChoreo;
+
+ ListMessagesChoreo.begin();
+
+ // set Temboo account credentials
+ ListMessagesChoreo.setAccountName(TEMBOO_ACCOUNT);
+ ListMessagesChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ ListMessagesChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (Twilio > SMSMessages > ListMessages)
+ ListMessagesChoreo.setChoreo("/Library/Twilio/SMSMessages/ListMessages");
+
+ // set the choreo inputs
+ // see https://www.temboo.com/library/Library/Twilio/SMSMessages/ListMessages/
+ // for complete details about the inputs for this Choreo
+
+ // the first input is a your Twilio AccountSID
+ ListMessagesChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID);
+
+ // next is your Twilio Auth Token
+ ListMessagesChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN);
+
+ // we only want to know about messages sent from our designated phone number
+ ListMessagesChoreo.addInput("From", FROM_PHONE_NUMBER);
+
+ // Twilio can return information about up to 1000 messages at a time.
+ // we're only interested in the 3 most recent ones. Note that if
+ // this account receives lots of messages in quick succession,
+ // (more than 3 per minute in this case), we might miss some control
+ // messages. But if we request too many messages, we might run out of
+ // memory on the Arduino side of the Yun.
+ ListMessagesChoreo.addInput("PageSize", "3");
+
+ // We want the response in XML format to process with our
+ // XPath output filters.
+ ListMessagesChoreo.addInput("ResponseFormat", "xml");
+
+ // we don't want everything from the output, just the
+ // message IDs (the Sids) and the message texts
+ ListMessagesChoreo.addOutputFilter("sid", "Sid", "Response");
+ ListMessagesChoreo.addOutputFilter("text", "Body", "Response");
+
+ // tell the Choreo to run and wait for the results. The
+ // return code (returnCode) will tell us whether the Temboo client
+ // was able to send our request to the Temboo servers
+ unsigned int returnCode = ListMessagesChoreo.run();
+
+ // a return code of zero (0) means success
+ if (returnCode == 0) {
+
+ // Need a string to hold the list of message IDs.
+ String messageSids;
+
+ // Need a string to hold the texts of the messages.
+ String messageTexts;
+
+ // when the choreo results are available, process them.
+ // the output filters we specified will return comma delimited
+ // lists containing the Sids and texts of the messages
+ // from our designated phone number.
+
+ while(ListMessagesChoreo.available()) {
+
+ // output names are terminated with '\x1F' characters.
+ String name = ListMessagesChoreo.readStringUntil('\x1F');
+ name.trim();
+ //Serial.println(name);
+
+ // output values are terminated with '\x1E' characters.
+ String data = ListMessagesChoreo.readStringUntil('\x1E');
+ data.trim();
+ //Serial.println(data);
+
+ // assign the data to the appropriate string based on the name
+ if (name == "sid") {
+ messageSids = data;
+ } else if (name == "text") {
+ messageTexts = data;
+ }
+ }
+
+ // done reading output, close the Choreo to free up resources.
+ ListMessagesChoreo.close();
+
+ // parse the comma delimited lists of messages and Sids
+ processMessages(messageTexts, messageSids, ignoreCommands);
+
+ } else {
+ // a non-zero return code means there was an error
+ // read and print the error message
+ while(ListMessagesChoreo.available()) {
+ char c = ListMessagesChoreo.read();
+ Serial.print(c);
+ }
+ }
+}
+
+/*
+This function processes the lists of message texts and Sids.
+If a message contains a comma as part of the
+message text, that message will be enclosed in double quotes
+(") in the list. Example:
+
+ A message,"Hey, now",Another message text
+
+If the message contains double quotes, it will be enclosed in
+double quotes AND the internal quotes will be doubled.
+Example:
+
+ "Hi ""Sam"" the man", Led on
+
+NOTE! We are assuming that Twilio returns more recent messages
+first. This isn't officially documented by Twilio, but we've
+not seen any other case.
+
+'messageTexts' is a String containing a comma separated list of
+message texts with commas and quotes escaped as described above.
+
+'messageSids' is a String containing a comma separated list of
+message Sids. Sids should not contain embedded commas or quotes.
+
+'ignoreCommands' is a boolean. 'true' means and control messages
+will not be acted upon. 'false' means control messages will be
+acted upon in the usual way.
+*/
+void processMessages(String messageTexts, String messageSids, bool ignoreCommands) {
+
+ // proceed if we received at least one message
+ if (messageSids.length() > 0) {
+ int i = -1;
+ int sidsStart = 0;
+ int textsStart = 0;
+ String sid;
+ String text;
+ bool ledUpdated = false;
+
+ // go through the list until we run out of items
+ // or otherwise know we can stop
+ do {
+
+ // Output filter list items are separated by commas
+ // find the start of the next item in the list
+ i = messageSids.indexOf(',', sidsStart);
+ if (i >= 0) {
+
+ //extract a single Sid from the list.
+ sid = messageSids.substring(sidsStart, i);
+ sidsStart = i + 1;
+
+ // find the start of the next text in the list.
+ // Note that we have to be prepared to handle embedded
+ // quotes and commans in the message texts.
+ // The standard Arduino String class doesn't handle
+ // this, so we have to write our own function to do it.
+ i = quotedIndexOf(messageTexts, ',', textsStart);
+ if (i >= 0) {
+
+ // extract a single message text from the list.
+ text = messageTexts.substring(textsStart, i);
+ textsStart = i + 1;
+
+ // process the Sid and text to see if it's a
+ // control message.
+ ledUpdated = processMessage(sid, text, ignoreCommands);
+ }
+ } else {
+
+ // the last item in the lists won't have a comma at the end,
+ // so we have to handle them specially.
+ // Since we know this is the last item, we can just
+ // take the rest of the string for the Sid and text.
+ sid = messageSids.substring(sidsStart);
+ text = messageTexts.substring(textsStart);
+
+ // process the last item.
+ ledUpdated = processMessage(sid, text, ignoreCommands);
+ }
+
+ // keep going until either we run out of list items
+ // or we run into a message we processed on a previous run.
+ } while ((i >=0) && (sid != lastSid));
+
+ // print what we've found to the serial monitor,
+ // just so we can see what's going on.
+ if (sid == lastSid) {
+ if (ledUpdated)
+ Serial.println("Control message processed.");
+ else
+ Serial.println("No new control messages received.");
+ } else {
+ Serial.println("No control messages received.");
+ }
+ } else {
+ Serial.println("No messages found");
+ }
+}
+
+/*
+This function knows how to tell if a message is a control message
+or not. It also knows know to control whatever it is we're controlling
+(the state of the LED on pin 13 in this case.)
+
+A message with the text "LED ON" turns the LED on.
+A message with the text "LED OFF" turns the LED off.
+(Case is ignored.)
+
+If 'ignoreCommands' is true, the actions described above will NOT
+take place.
+
+It also updates the 'lastSid' global variable when
+a control message is processed.
+
+It returns 'true' if the message was a control message, and
+'false' if it wasn't or if we've already processed this message.
+*/
+bool processMessage(String sid, String text, bool ignoreCommands) {
+
+ // a flag to indicate whether this was a control message or not
+ bool ledUpdated = false;
+
+ // if we haven't already processed this message
+ if (sid != lastSid) {
+
+ if (text.equalsIgnoreCase("LED ON")) {
+
+ if (!ignoreCommands) {
+ //turn on the LED
+ digitalWrite(LED_PIN, HIGH);
+ Serial.println("LED ON");
+ }
+ ledUpdated = true;
+ } else if (text.equalsIgnoreCase("LED OFF")) {
+ if (!ignoreCommands) {
+ //turn off the LED
+ digitalWrite(LED_PIN, LOW);
+ Serial.println("LED OFF");
+ }
+ ledUpdated = true;
+ }
+
+ // If the LED state was updated, remember the Sid if this message.
+ if (ledUpdated)
+ lastSid = sid;
+ }
+ return ledUpdated;
+}
+
+/*
+This function finds the index of a delimiter character in a String,
+ignoring delimiters that appear inside double-quotes.
+*/
+int quotedIndexOf(String s, char delim, int start) {
+ bool inQuotes = false;
+ char c;
+ int index = -1;
+ const char QUOTE = '"';
+ do {
+ c = s[start++];
+ if (c == QUOTE)
+ inQuotes = !inQuotes;
+ else if (c == delim && !inQuotes)
+ index = --start;
+ } while ((c != '\0') && (index < 0));
+ return index;
+}
+
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can save it once,
+ then just distribute the main .ino file without worrying that you forgot to delete your credentials.
+*/
+
diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h
new file mode 100644
index 0000000..8d7dcfb
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h
@@ -0,0 +1,5 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+
diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino
new file mode 100644
index 0000000..669aba5
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino
@@ -0,0 +1,115 @@
+/*
+ GetYahooWeatherReport
+
+ Demonstrates making a request to the Yahoo! Weather API using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+ to the Internet.
+
+ Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+
+// the address for which a weather forecast will be retrieved
+String ADDRESS_FOR_FORECAST = "104 Franklin St., New York NY 10013";
+
+int numRuns = 1; // execution count, so that this doesn't run forever
+int maxRuns = 10; // max number of times the Yahoo WeatherByAddress Choreo should be run
+
+
+void setup() {
+ Serial.begin(9600);
+
+ // for debugging, wait until a serial console is connected
+ delay(4000);
+ while(!Serial);
+ Bridge.begin();
+
+}
+
+void loop()
+{
+ // while we haven't reached the max number of runs...
+ if (numRuns <= maxRuns) {
+
+ // print status
+ Serial.println("Running GetWeatherByAddress - Run #" + String(numRuns++) + "...");
+
+ // create a TembooChoreo object to send a Choreo request to Temboo
+ TembooChoreo GetWeatherByAddressChoreo;
+
+ // invoke the Temboo client
+ GetWeatherByAddressChoreo.begin();
+
+ // add your temboo account info
+ GetWeatherByAddressChoreo.setAccountName(TEMBOO_ACCOUNT);
+ GetWeatherByAddressChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ GetWeatherByAddressChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // set the name of the choreo we want to run
+ GetWeatherByAddressChoreo.setChoreo("/Library/Yahoo/Weather/GetWeatherByAddress");
+
+ // set choreo inputs; in this case, the address for which to retrieve weather data
+ // the Temboo client provides standardized calls to 100+ cloud APIs
+ GetWeatherByAddressChoreo.addInput("Address", ADDRESS_FOR_FORECAST);
+
+ // add an output filter to extract the name of the city.
+ GetWeatherByAddressChoreo.addOutputFilter("city", "/rss/channel/yweather:location/@city", "Response");
+
+ // add an output filter to extract the current temperature
+ GetWeatherByAddressChoreo.addOutputFilter("temperature", "/rss/channel/item/yweather:condition/@temp", "Response");
+
+ // add an output filter to extract the date and time of the last report.
+ GetWeatherByAddressChoreo.addOutputFilter("date", "/rss/channel/item/yweather:condition/@date", "Response");
+
+ // run the choreo
+ GetWeatherByAddressChoreo.run();
+
+ // when the choreo results are available, print them to the serial monitor
+ while(GetWeatherByAddressChoreo.available()) {
+
+ char c = GetWeatherByAddressChoreo.read();
+ Serial.print(c);
+ }
+ GetWeatherByAddressChoreo.close();
+
+ }
+
+ Serial.println("Waiting...");
+ Serial.println("");
+ delay(30000); // wait 30 seconds between GetWeatherByAddress calls
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h
new file mode 100644
index 0000000..c58b447
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h
@@ -0,0 +1,4 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino b/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino
new file mode 100644
index 0000000..b2edd1f
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino
@@ -0,0 +1,173 @@
+/*
+ ReadATweet
+
+ Demonstrates retrieving the most recent Tweet from a user's home timeline
+ using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ In order to run this sketch, you'll need to register an application using
+ the Twitter dev console at https://dev.twitter.com. After creating the
+ app, you'll find OAuth credentials for that application under the "OAuth Tool" tab.
+ Substitute these values for the placeholders below.
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun
+ is connected to the Internet.
+
+ Want to use another social API with your Arduino Yun? We've got Facebook,
+ Google+, Instagram, Tumblr and more in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token";
+const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret";
+const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key";
+const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret";
+
+int numRuns = 1; // execution count, so this doesn't run forever
+int maxRuns = 10; // the max number of times the Twitter HomeTimeline Choreo should run
+
+void setup() {
+ Serial.begin(9600);
+
+ // For debugging, wait until a serial console is connected.
+ delay(4000);
+ while(!Serial);
+ Bridge.begin();
+}
+void loop()
+{
+ // while we haven't reached the max number of runs...
+ if (numRuns <= maxRuns) {
+ Serial.println("Running ReadATweet - Run #" + String(numRuns++));
+
+ TembooChoreo HomeTimelineChoreo;
+
+ // invoke the Temboo client.
+ // NOTE that the client must be reinvoked, and repopulated with
+ // appropriate arguments, each time its run() method is called.
+ HomeTimelineChoreo.begin();
+
+ // set Temboo account credentials
+ HomeTimelineChoreo.setAccountName(TEMBOO_ACCOUNT);
+ HomeTimelineChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ HomeTimelineChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // tell the Temboo client which Choreo to run (Twitter > Timelines > HomeTimeline)
+ HomeTimelineChoreo.setChoreo("/Library/Twitter/Timelines/HomeTimeline");
+
+
+ // set the required choreo inputs
+ // see https://www.temboo.com/library/Library/Twitter/Timelines/HomeTimeline/
+ // for complete details about the inputs for this Choreo
+
+ HomeTimelineChoreo.addInput("Count", "1"); // the max number of Tweets to return from each request
+ HomeTimelineChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN);
+ HomeTimelineChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET);
+ HomeTimelineChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY);
+ HomeTimelineChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET);
+
+ // next, we'll define two output filters that let us specify the
+ // elements of the response from Twitter that we want to receive.
+ // see the examples at http://www.temboo.com/arduino
+ // for more on using output filters
+
+ // we want the text of the tweet
+ HomeTimelineChoreo.addOutputFilter("tweet", "/[1]/text", "Response");
+
+ // and the name of the author
+ HomeTimelineChoreo.addOutputFilter("author", "/[1]/user/screen_name", "Response");
+
+
+ // tell the Process to run and wait for the results. The
+ // return code will tell us whether the Temboo client
+ // was able to send our request to the Temboo servers
+ unsigned int returnCode = HomeTimelineChoreo.run();
+
+ // a response code of 0 means success; print the API response
+ if(returnCode == 0) {
+
+ String author; // a String to hold the tweet author's name
+ String tweet; // a String to hold the text of the tweet
+
+
+ // choreo outputs are returned as key/value pairs, delimited with
+ // newlines and record/field terminator characters, for example:
+ // Name1\n\x1F
+ // Value1\n\x1E
+ // Name2\n\x1F
+ // Value2\n\x1E
+
+ // see the examples at http://www.temboo.com/arduino for more details
+ // we can read this format into separate variables, as follows:
+
+ while(HomeTimelineChoreo.available()) {
+ // read the name of the output item
+ String name = HomeTimelineChoreo.readStringUntil('\x1F');
+ name.trim();
+
+ // read the value of the output item
+ String data = HomeTimelineChoreo.readStringUntil('\x1E');
+ data.trim();
+
+ // assign the value to the appropriate String
+ if (name == "tweet") {
+ tweet = data;
+ } else if (name == "author") {
+ author = data;
+ }
+ }
+
+ Serial.println("@" + author + " - " + tweet);
+
+ } else {
+ // there was an error
+ // print the raw output from the choreo
+ while(HomeTimelineChoreo.available()) {
+ char c = HomeTimelineChoreo.read();
+ Serial.print(c);
+ }
+ }
+
+ HomeTimelineChoreo.close();
+
+ }
+
+ Serial.println("Waiting...");
+ delay(90000); // wait 90 seconds between HomeTimeline calls
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h
new file mode 100644
index 0000000..c58b447
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h
@@ -0,0 +1,4 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
diff --git a/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino b/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino
new file mode 100644
index 0000000..2e34a82
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino
@@ -0,0 +1,138 @@
+/*
+ SendATweet
+
+ Demonstrates sending a tweet via a Twitter account using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ In order to run this sketch, you'll need to register an application using
+ the Twitter dev console at https://dev.twitter.com. Note that since this
+ sketch creates a new tweet, your application will need to be configured with
+ read+write permissions. After creating the app, you'll find OAuth credentials
+ for that application under the "OAuth Tool" tab. Substitute these values for
+ the placeholders below.
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+ to the Internet.
+
+ Want to use another social API with your Arduino Yun? We've got Facebook,
+ Google+, Instagram, Tumblr and more in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token";
+const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret";
+const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key";
+const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret";
+
+int numRuns = 1; // execution count, so this sketch doesn't run forever
+int maxRuns = 3; // the max number of times the Twitter Update Choreo should run
+
+void setup() {
+ Serial.begin(9600);
+
+ // for debugging, wait until a serial console is connected
+ delay(4000);
+ while(!Serial);
+
+ Bridge.begin();
+}
+
+void loop()
+{
+ // only try to send the tweet if we haven't already sent it successfully
+ if (numRuns <= maxRuns) {
+
+ Serial.println("Running SendATweet - Run #" + String(numRuns++) + "...");
+
+ // define the text of the tweet we want to send
+ String tweetText("My Arduino Yun has been running for " + String(millis()) + " milliseconds.");
+
+
+ TembooChoreo StatusesUpdateChoreo;
+
+ // invoke the Temboo client
+ // NOTE that the client must be reinvoked, and repopulated with
+ // appropriate arguments, each time its run() method is called.
+ StatusesUpdateChoreo.begin();
+
+ // set Temboo account credentials
+ StatusesUpdateChoreo.setAccountName(TEMBOO_ACCOUNT);
+ StatusesUpdateChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ StatusesUpdateChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (Twitter > Tweets > StatusesUpdate)
+ StatusesUpdateChoreo.setChoreo("/Library/Twitter/Tweets/StatusesUpdate");
+
+ // set the required choreo inputs
+ // see https://www.temboo.com/library/Library/Twitter/Tweets/StatusesUpdate/
+ // for complete details about the inputs for this Choreo
+
+ // add the Twitter account information
+ StatusesUpdateChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN);
+ StatusesUpdateChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET);
+ StatusesUpdateChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY);
+ StatusesUpdateChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET);
+
+ // and the tweet we want to send
+ StatusesUpdateChoreo.addInput("StatusUpdate", tweetText);
+
+ // tell the Process to run and wait for the results. The
+ // return code (returnCode) will tell us whether the Temboo client
+ // was able to send our request to the Temboo servers
+ unsigned int returnCode = StatusesUpdateChoreo.run();
+
+ // a return code of zero (0) means everything worked
+ if (returnCode == 0) {
+ Serial.println("Success! Tweet sent!");
+ } else {
+ // a non-zero return code means there was an error
+ // read and print the error message
+ while (StatusesUpdateChoreo.available()) {
+ char c = StatusesUpdateChoreo.read();
+ Serial.print(c);
+ }
+ }
+ StatusesUpdateChoreo.close();
+
+ // do nothing for the next 90 seconds
+ Serial.println("Waiting...");
+ delay(90000);
+ }
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h
new file mode 100644
index 0000000..c58b447
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h
@@ -0,0 +1,4 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino b/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino
new file mode 100644
index 0000000..4f841f8
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino
@@ -0,0 +1,137 @@
+/*
+ SendAnEmail
+
+ Demonstrates sending an email via a Google Gmail account using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ Since this sketch uses Gmail to send the email, you'll also need a valid
+ Google Gmail account. The sketch needs the username and password you use
+ to log into your Gmail account - substitute the placeholders below for these values.
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+ to the Internet.
+
+ Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+
+// your Gmail username, formatted as a complete email address, eg "bob.smith@gmail.com"
+const String GMAIL_USER_NAME = "xxxxxxxxxx";
+
+// your Gmail password
+const String GMAIL_PASSWORD = "xxxxxxxxxx";
+
+// the email address you want to send the email to, eg "jane.doe@temboo.com"
+const String TO_EMAIL_ADDRESS = "xxxxxxxxxx";
+
+// a flag to indicate whether we've tried to send the email yet or not
+boolean attempted = false;
+
+void setup() {
+ Serial.begin(9600);
+
+ // for debugging, wait until a serial console is connected
+ delay(4000);
+ while(!Serial);
+
+ Bridge.begin();
+}
+
+void loop()
+{
+ // only try to send the email if we haven't already tried
+ if (!attempted) {
+
+ Serial.println("Running SendAnEmail...");
+
+ TembooChoreo SendEmailChoreo;
+
+ // invoke the Temboo client
+ // NOTE that the client must be reinvoked, and repopulated with
+ // appropriate arguments, each time its run() method is called.
+ SendEmailChoreo.begin();
+
+ // set Temboo account credentials
+ SendEmailChoreo.setAccountName(TEMBOO_ACCOUNT);
+ SendEmailChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ SendEmailChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (Google > Gmail > SendEmail)
+ SendEmailChoreo.setChoreo("/Library/Google/Gmail/SendEmail");
+
+
+ // set the required choreo inputs
+ // see https://www.temboo.com/library/Library/Google/Gmail/SendEmail/
+ // for complete details about the inputs for this Choreo
+
+ // the first input is your Gmail email address.
+ SendEmailChoreo.addInput("Username", GMAIL_USER_NAME);
+ // next is your Gmail password.
+ SendEmailChoreo.addInput("Password", GMAIL_PASSWORD);
+ // who to send the email to
+ SendEmailChoreo.addInput("ToAddress", TO_EMAIL_ADDRESS);
+ // then a subject line
+ SendEmailChoreo.addInput("Subject", "ALERT: Greenhouse Temperature");
+
+ // next comes the message body, the main content of the email
+ SendEmailChoreo.addInput("MessageBody", "Hey! The greenhouse is too cold!");
+
+ // tell the Choreo to run and wait for the results. The
+ // return code (returnCode) will tell us whether the Temboo client
+ // was able to send our request to the Temboo servers
+ unsigned int returnCode = SendEmailChoreo.run();
+
+ // a return code of zero (0) means everything worked
+ if (returnCode == 0) {
+ Serial.println("Success! Email sent!");
+ } else {
+ // a non-zero return code means there was an error
+ // read and print the error message
+ while (SendEmailChoreo.available()) {
+ char c = SendEmailChoreo.read();
+ Serial.print(c);
+ }
+ }
+ SendEmailChoreo.close();
+
+ // set the flag showing we've tried
+ attempted = true;
+ }
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h
new file mode 100644
index 0000000..c58b447
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h
@@ -0,0 +1,4 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino b/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino
new file mode 100644
index 0000000..2b0cfb1
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino
@@ -0,0 +1,154 @@
+/*
+ SendAnSMS
+
+ Demonstrates sending an SMS via Twilio using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ Since this sketch uses Twilio to send the SMS, you'll also need a valid
+ Twilio account. You can create one for free at https://www.twilio.com.
+
+ The sketch needs your Twilio phone number, along with
+ the Account SID and Auth Token you get when you register with Twilio.
+ Make sure to use the Account SID and Auth Token from your Twilio Dashboard
+ (not your test credentials from the Dev Tools panel).
+
+ Also note that if you're using a free Twilio account, you'll need to verify
+ the phone number to which messages are being sent by going to twilio.com and following
+ the instructions under the "Numbers > Verified Caller IDs" tab (this restriction
+ doesn't apply if you have a paid Twilio account).
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+ to the Internet.
+
+ Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+
+// the Account SID from your Twilio account
+const String TWILIO_ACCOUNT_SID = "xxxxxxxxxx";
+
+// the Auth Token from your Twilio account
+const String TWILIO_AUTH_TOKEN = "xxxxxxxxxx";
+
+// your Twilio phone number, e.g., "+1 555-222-1212"
+const String TWILIO_NUMBER = "xxxxxxxxxx";
+
+// the number to which the SMS should be sent, e.g., "+1 555-222-1212"
+const String RECIPIENT_NUMBER = "xxxxxxxxxx";
+
+// a flag to indicate whether we've attempted to send the SMS yet or not
+boolean attempted = false;
+
+void setup() {
+ Serial.begin(9600);
+
+ // for debugging, wait until a serial console is connected
+ delay(4000);
+ while(!Serial);
+
+ Bridge.begin();
+}
+
+void loop()
+{
+ // only try to send the SMS if we haven't already sent it successfully
+ if (!attempted) {
+
+ Serial.println("Running SendAnSMS...");
+
+ // we need a Process object to send a Choreo request to Temboo
+ TembooChoreo SendSMSChoreo;
+
+ // invoke the Temboo client
+ // NOTE that the client must be reinvoked and repopulated with
+ // appropriate arguments each time its run() method is called.
+ SendSMSChoreo.begin();
+
+ // set Temboo account credentials
+ SendSMSChoreo.setAccountName(TEMBOO_ACCOUNT);
+ SendSMSChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ SendSMSChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (Twilio > SMSMessages > SendSMS)
+ SendSMSChoreo.setChoreo("/Library/Twilio/SMSMessages/SendSMS");
+
+ // set the required choreo inputs
+ // see https://www.temboo.com/library/Library/Twilio/SMSMessages/SendSMS/
+ // for complete details about the inputs for this Choreo
+
+ // the first input is a your AccountSID
+ SendSMSChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID);
+
+ // next is your Auth Token
+ SendSMSChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN);
+
+ // next is your Twilio phone number
+ SendSMSChoreo.addInput("From", TWILIO_NUMBER);
+
+ // next, what number to send the SMS to
+ SendSMSChoreo.addInput("To", RECIPIENT_NUMBER);
+
+ // finally, the text of the message to send
+ SendSMSChoreo.addInput("Body", "Hey, there! This is a message from your Arduino Yun!");
+
+ // tell the Process to run and wait for the results. The
+ // return code (returnCode) will tell us whether the Temboo client
+ // was able to send our request to the Temboo servers
+ unsigned int returnCode = SendSMSChoreo.run();
+
+ // a return code of zero (0) means everything worked
+ if (returnCode == 0) {
+ Serial.println("Success! SMS sent!");
+ } else {
+ // a non-zero return code means there was an error
+ // read and print the error message
+ while (SendSMSChoreo.available()) {
+ char c = SendSMSChoreo.read();
+ Serial.print(c);
+ }
+ }
+ SendSMSChoreo.close();
+
+ // set the flag indicatine we've tried once.
+ attempted=true;
+ }
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h
new file mode 100644
index 0000000..8d7dcfb
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h
@@ -0,0 +1,5 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+
diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino
new file mode 100644
index 0000000..1f1b6b4
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino
@@ -0,0 +1,178 @@
+/*
+ SendDataToGoogleSpreadsheet
+
+ Demonstrates appending a row of data to a Google spreadsheet using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ Since this sketch uses a Google spreadsheet, you'll also need a
+ Google account: substitute the placeholders below for your Google account values.
+
+ This example assumes basic familiarity with Arduino sketches, and that your
+ Yun is connected to the Internet.
+
+ The columns in your spreadsheet must have labels for the Choreo to
+ work properly. It doesn't matter what the column labels actually are,
+ but there must be text in the first row of each column. This example
+ assumes there are two columns. The first column is the time (in milliseconds)
+ that the row was appended, and the second column is a sensor value.
+ In other words, your spreadsheet should look like:
+
+ Time | Sensor Value |
+ ------+-----------------
+ | |
+
+ NOTE that the first time you run this sketch, you may receive a warning from
+ Google, prompting you to authorize access from a 3rd party system.
+
+ Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
+
+ This example code is in the public domain.
+
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information,
+ // as described in the footer comment below
+
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+
+const String GOOGLE_USERNAME = "your-google-username";
+const String GOOGLE_PASSWORD = "your-google-password";
+
+// the title of the spreadsheet you want to send data to
+// (Note that this must actually be the title of a Google spreadsheet
+// that exists in your Google Drive/Docs account, and is configured
+// as described above.)
+const String SPREADSHEET_TITLE = "your-spreadsheet-title";
+
+const unsigned long RUN_INTERVAL_MILLIS = 60000; // how often to run the Choreo (in milliseconds)
+
+// the last time we ran the Choreo
+// (initialized to 60 seconds ago so the
+// Choreo is run immediately when we start up)
+unsigned long lastRun = (unsigned long)-60000;
+
+void setup() {
+
+ // for debugging, wait until a serial console is connected
+ Serial.begin(9600);
+ delay(4000);
+ while(!Serial);
+
+ Serial.print("Initializing the bridge...");
+ Bridge.begin();
+ Serial.println("Done");
+}
+
+void loop()
+{
+ // get the number of milliseconds this sketch has been running
+ unsigned long now = millis();
+
+ // run again if it's been 60 seconds since we last ran
+ if (now - lastRun >= RUN_INTERVAL_MILLIS) {
+
+ // remember 'now' as the last time we ran the choreo
+ lastRun = now;
+
+ Serial.println("Getting sensor value...");
+
+ // get the value we want to append to our spreadsheet
+ unsigned long sensorValue = getSensorValue();
+
+ Serial.println("Appending value to spreadsheet...");
+
+ // we need a Process object to send a Choreo request to Temboo
+ TembooChoreo AppendRowChoreo;
+
+ // invoke the Temboo client
+ // NOTE that the client must be reinvoked and repopulated with
+ // appropriate arguments each time its run() method is called.
+ AppendRowChoreo.begin();
+
+ // set Temboo account credentials
+ AppendRowChoreo.setAccountName(TEMBOO_ACCOUNT);
+ AppendRowChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ AppendRowChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (Google > Spreadsheets > AppendRow)
+ AppendRowChoreo.setChoreo("/Library/Google/Spreadsheets/AppendRow");
+
+ // set the required Choreo inputs
+ // see https://www.temboo.com/library/Library/Google/Spreadsheets/AppendRow/
+ // for complete details about the inputs for this Choreo
+
+ // your Google username (usually your email address)
+ AppendRowChoreo.addInput("Username", GOOGLE_USERNAME);
+
+ // your Google account password
+ AppendRowChoreo.addInput("Password", GOOGLE_PASSWORD);
+
+ // the title of the spreadsheet you want to append to
+ // NOTE: substitute your own value, retaining the "SpreadsheetTitle:" prefix.
+ AppendRowChoreo.addInput("SpreadsheetTitle", SPREADSHEET_TITLE);
+
+ // convert the time and sensor values to a comma separated string
+ String rowData(now);
+ rowData += ",";
+ rowData += sensorValue;
+
+ // add the RowData input item
+ AppendRowChoreo.addInput("RowData", rowData);
+
+ // run the Choreo and wait for the results
+ // The return code (returnCode) will indicate success or failure
+ unsigned int returnCode = AppendRowChoreo.run();
+
+ // return code of zero (0) means success
+ if (returnCode == 0) {
+ Serial.println("Success! Appended " + rowData);
+ Serial.println("");
+ } else {
+ // return code of anything other than zero means failure
+ // read and display any error messages
+ while (AppendRowChoreo.available()) {
+ char c = AppendRowChoreo.read();
+ Serial.print(c);
+ }
+ }
+
+ AppendRowChoreo.close();
+ }
+}
+
+// this function simulates reading the value of a sensor
+unsigned long getSensorValue() {
+ return analogRead(A0);
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h
new file mode 100644
index 0000000..8d7dcfb
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h
@@ -0,0 +1,5 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+
diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h
new file mode 100644
index 0000000..8d7dcfb
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h
@@ -0,0 +1,5 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+
diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino
new file mode 100644
index 0000000..3b7f1d1
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino
@@ -0,0 +1,171 @@
+/*
+ ToxicFacilitiesSearch
+
+ Demonstrates making a request to the Envirofacts API using Temboo from an Arduino Yun.
+ This example retrieves the names and addresses of EPA-regulated facilities in the
+ Toxins Release Inventory (TRI) database within a given zip code.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+ to the Internet.
+
+ Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+// the zip code to search for toxin-emitting facilities
+String US_ZIP_CODE = "11215";
+
+int numRuns = 1; // execution count, so that this doesn't run forever
+int maxRuns = 10; // max number of times the Envirofacts FacilitiesSearch Choreo should be run
+
+void setup() {
+ Serial.begin(9600);
+
+ // for debugging, wait until a serial console is connected
+ delay(4000);
+ while(!Serial);
+ Bridge.begin();
+}
+
+void loop()
+{
+ // while we haven't reached the max number of runs...
+ if (numRuns <= maxRuns) {
+
+ // print status
+ Serial.println("Running ToxicFacilitiesSearch - Run #" + String(numRuns++) + "...");
+
+ // we need a Process object to send a Choreo request to Temboo
+ TembooChoreo FacilitiesSearchByZipChoreo;
+
+ // invoke the Temboo client
+ // NOTE that the client must be reinvoked and repopulated with
+ // appropriate arguments each time its run() method is called.
+ FacilitiesSearchByZipChoreo.begin();
+
+ // set Temboo account credentials
+ FacilitiesSearchByZipChoreo.setAccountName(TEMBOO_ACCOUNT);
+ FacilitiesSearchByZipChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ FacilitiesSearchByZipChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (EnviroFacts > Toxins > FacilitiesSearchByZip)
+ FacilitiesSearchByZipChoreo.setChoreo("/Library/EnviroFacts/Toxins/FacilitiesSearchByZip");
+
+ // set choreo inputs; in this case, the US zip code for which to retrieve toxin release data
+ // the Temboo client provides standardized calls to 100+ cloud APIs
+ FacilitiesSearchByZipChoreo.addInput("Zip", US_ZIP_CODE);
+
+ // specify two output filters, to help simplify the Envirofacts API results.
+ // see the tutorials on using Temboo SDK output filters at http://www.temboo.com/arduino
+ FacilitiesSearchByZipChoreo.addOutputFilter("fac", "FACILITY_NAME", "Response");
+
+ FacilitiesSearchByZipChoreo.addOutputFilter("addr", "STREET_ADDRESS", "Response");
+
+ // run the choreo
+ unsigned int returnCode = FacilitiesSearchByZipChoreo.run();
+ if (returnCode == 0) {
+ String facilities;
+ String addresses;
+
+ // when the choreo results are available, process them.
+ // the output filters we specified will return comma delimited
+ // lists containing the name and street address of the facilities
+ // located in the specified zip code.
+ while(FacilitiesSearchByZipChoreo.available()) {
+ String name = FacilitiesSearchByZipChoreo.readStringUntil('\x1F');
+ name.trim();
+
+ String data = FacilitiesSearchByZipChoreo.readStringUntil('\x1E');
+ data.trim();
+
+ if (name == "fac") {
+ facilities = data;
+ } else if (name == "addr") {
+ addresses = data;
+ }
+ }
+ FacilitiesSearchByZipChoreo.close();
+
+ // parse the comma delimited lists of facilities to join the
+ // name with the address and print it to the serial monitor
+ if (facilities.length() > 0) {
+ int i = -1;
+ int facilityStart = 0;
+ int addressStart = 0;
+ String facility;
+ String address;
+ do {
+ i = facilities.indexOf(',', facilityStart);
+ if (i >= 0) {
+ facility = facilities.substring(facilityStart, i);
+ facilityStart = i + 1;
+ }
+
+ i = addresses.indexOf(',', addressStart);
+ if (i >= 0) {
+ address = addresses.substring(addressStart, i);
+ addressStart = i + 1;
+ }
+
+ if (i >= 0) {
+ printResult(facility, address);
+ }
+
+ }while (i >= 0);
+ facility = facilities.substring(facilityStart);
+ address = addresses.substring(addressStart);
+ printResult(facility, address);
+ } else {
+ Serial.println("No facilities found in zip code " + US_ZIP_CODE);
+ }
+ } else {
+ while(FacilitiesSearchByZipChoreo.available()) {
+ char c = FacilitiesSearchByZipChoreo.read();
+ Serial.print(c);
+ }
+ }
+ }
+ Serial.println("Waiting...");
+ Serial.println("");
+ delay(30000); // wait 30 seconds between calls
+}
+
+// a simple utility function, to output the facility name and address in the serial monitor.
+void printResult(String facility, String address) {
+ Serial.print(facility);
+ Serial.print(" - ");
+ Serial.println(address);
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h
new file mode 100644
index 0000000..8d7dcfb
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h
@@ -0,0 +1,5 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+
diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino
new file mode 100644
index 0000000..dd8cabd
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino
@@ -0,0 +1,132 @@
+/*
+ UpdateFacebookStatus
+
+ Demonstrates sending a Facebook status update using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ In order to run this sketch, you'll need to register an application using
+ the Facebook dev console at https://developers.facebook.com/apps -- after creating
+ the app, log in to Temboo and visit https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/
+ to use our OAuth Wizard (or OAuth Choreos) to obtain a Facebook access token.
+ Substitute your access token for the placeholder value of FACEBOOK_ACCESS_TOKEN below.
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun
+ is connected to the Internet.
+
+ Want to use another social API with your Arduino Yun? We've got Twitter, Google+,
+ Instagram, Tumblr and more in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information,
+ // as described in the footer comment below
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use a #define statement to specify this value in a .h file.
+
+// the Facebook Access Token, which can be obtained using the Temboo OAuth Wizard or Choreos
+const String FACEBOOK_ACCESS_TOKEN = "xxxxxxxxxx";
+
+
+int numRuns = 1; // execution count, so this sketch doesn't run forever
+int maxRuns = 10; // the max number of times the Facebook SetStatus Choreo should run
+
+void setup() {
+ Serial.begin(9600);
+
+ // For debugging, wait until a serial console is connected.
+ delay(4000);
+ while(!Serial);
+ Bridge.begin();
+}
+
+void loop() {
+ // while we haven't reached the max number of runs...
+ if (numRuns <= maxRuns) {
+
+ // print status
+ Serial.println("Running UpdateFacebookStatus - Run #" + String(numRuns++) + "...");
+
+ // Define the status message we want to post on Facebook; since Facebook
+ // doesn't allow duplicate status messages, we'll include a changing value.
+ String statusMsg = "My Arduino Yun has been running for " + String(millis()) + " milliseconds!";
+
+ // define the Process that will be used to call the "temboo" client
+ TembooChoreo SetStatusChoreo;
+
+ // invoke the Temboo client
+ // NOTE that the client must be reinvoked and repopulated with
+ // appropriate arguments each time its run() method is called.
+ SetStatusChoreo.begin();
+
+ // set Temboo account credentials
+ SetStatusChoreo.setAccountName(TEMBOO_ACCOUNT);
+ SetStatusChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ SetStatusChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // tell the Temboo client which Choreo to run (Facebook > Publishing > SetStatus)
+ SetStatusChoreo.setChoreo("/Library/Facebook/Publishing/SetStatus");
+
+ // set the required choreo inputs
+ // see https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/
+ // for complete details about the inputs for this Choreo
+
+ SetStatusChoreo.addInput("AccessToken", FACEBOOK_ACCESS_TOKEN);
+ SetStatusChoreo.addInput("Message", statusMsg);
+
+
+ // tell the Process to run and wait for the results. The
+ // return code (returnCode) will tell us whether the Temboo client
+ // was able to send our request to the Temboo servers
+ unsigned int returnCode = SetStatusChoreo.run();
+
+ // print the response code and API response.
+ Serial.println("Response code: " + String(returnCode));
+
+ // note that in this case, we're just printing the raw response from Facebook.
+ // see the examples on using Temboo SDK output filters at http://www.temboo.com/arduino
+ // for information on how to filter this data
+ while(SetStatusChoreo.available()) {
+ char c = SetStatusChoreo.read();
+ Serial.print(c);
+ }
+
+ SetStatusChoreo.close();
+ }
+
+ Serial.println("Waiting...");
+ Serial.println("");
+
+ delay(30000); // wait 30 seconds between SetStatus calls
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h b/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h
new file mode 100644
index 0000000..8d7dcfb
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h
@@ -0,0 +1,5 @@
+#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+
diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino b/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino
new file mode 100644
index 0000000..744dcdb
--- /dev/null
+++ b/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino
@@ -0,0 +1,208 @@
+/*
+ UploadToDropbox
+
+ Demonstrates uploading a file to a Dropbox account using Temboo from an Arduino Yun.
+
+ Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino
+
+ A Temboo account and application key are necessary to run all Temboo examples.
+ If you don't already have one, you can register for a free Temboo account at
+ http://www.temboo.com
+
+ You'll also need a valid Dropbox app and accompanying OAuth credentials.
+ To create a Dropbox app, visit https://www.dropbox.com/developers/apps and
+ do the following:
+
+ 1. Create a "Dropbox API app"
+ 2. Select "Files and datastores"
+ 3. Select "Yes - my app only needs access to the files it creates."
+
+ Once you've created your app, follow the instructions at
+ https://www.temboo.com/library/Library/Dropbox/OAuth/ to run the Initialize and Finalize
+ OAuth Choreos. These Choreos complete the OAuth handshake and retrieve your Dropbox OAuth access tokens.
+
+ This example assumes basic familiarity with Arduino sketches, and that your Yun is connected
+ to the Internet.
+
+ Looking for another API to use with your Arduino Yun? We've got over 100 in our Library!
+
+ This example code is in the public domain.
+*/
+
+#include <Bridge.h>
+#include <Temboo.h>
+#include "TembooAccount.h" // contains Temboo account information
+ // as described in the footer comment below
+
+
+/*** SUBSTITUTE YOUR VALUES BELOW: ***/
+
+// Note that for additional security and reusability, you could
+// use #define statements to specify these values in a .h file.
+
+// your Dropbox app key, available on the Dropbox developer console after registering an app
+const String DROPBOX_APP_KEY = "xxxxxxxxxx";
+
+// your Dropbox app secret, available on the Dropbox developer console after registering an app
+const String DROPBOX_APP_SECRET = "xxxxxxxxxx";
+
+// your Dropbox access token, which is returned by the FinalizeOAuth Choreo
+const String DROPBOX_ACCESS_TOKEN = "xxxxxxxxxx";
+
+// your Dropbox access token secret, which is returned by the FinalizeOAuth Choreo
+const String DROPBOX_ACCESS_TOKEN_SECRET = "xxxxxxxxxx";
+
+
+boolean success = false; // a flag to indicate whether we've uploaded the file yet
+
+void setup() {
+ Serial.begin(9600);
+
+ // For debugging, wait until a serial console is connected.
+ delay(4000);
+ while(!Serial);
+ Bridge.begin();
+}
+
+void loop()
+{
+ // only try to upload the file if we haven't already done so
+ if (!success) {
+
+ Serial.println("Base64 encoding data to upload...");
+
+ // base64 encode the data to upload
+ String base64EncodedData = base64Encode("Hello, Arduino!");
+
+
+ Serial.println("Uploading data to Dropbox...");
+
+ // we need a Process object to send a Choreo request to Temboo
+ TembooChoreo UploadFileChoreo;
+
+ // invoke the Temboo client
+ // NOTE that the client must be reinvoked and repopulated with
+ // appropriate arguments each time its run() method is called.
+ UploadFileChoreo.begin();
+
+ // set Temboo account credentials
+ UploadFileChoreo.setAccountName(TEMBOO_ACCOUNT);
+ UploadFileChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ UploadFileChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (Dropbox > FilesAndMetadata > UploadFile)
+ UploadFileChoreo.setChoreo("/Library/Dropbox/FilesAndMetadata/UploadFile");
+
+ // set the required choreo inputs
+ // see https://www.temboo.com/library/Library/Dropbox/FilesAndMetadata/UploadFile/
+ // for complete details about the inputs for this Choreo
+
+ // first specify the name of the file to create/update on Dropbox
+ UploadFileChoreo.addInput("FileName", "ArduinoTest.txt");
+
+ // next, the root folder on Dropbox relative to which the file path is specified.
+ // to work with the Dropbox app you created earlier, this should be left as "sandbox"
+ // if your Dropbox app has full access to your files, specify "dropbox"
+ UploadFileChoreo.addInput("Root","sandbox");
+
+ // next, the Base64 encoded file data to upload
+ UploadFileChoreo.addInput("FileContents", base64EncodedData);
+
+ // finally, the Dropbox OAuth credentials defined above
+ UploadFileChoreo.addInput("AppSecret", DROPBOX_APP_SECRET);
+ UploadFileChoreo.addInput("AccessToken", DROPBOX_ACCESS_TOKEN);
+ UploadFileChoreo.addInput("AccessTokenSecret", DROPBOX_ACCESS_TOKEN_SECRET);
+ UploadFileChoreo.addInput("AppKey", DROPBOX_APP_KEY);
+
+ // tell the Process to run and wait for the results. The
+ // return code (returnCode) will tell us whether the Temboo client
+ // was able to send our request to the Temboo servers
+ unsigned int returnCode = UploadFileChoreo.run();
+
+ // a return code of zero (0) means everything worked
+ if (returnCode == 0) {
+ Serial.println("Success! File uploaded!");
+ success = true;
+ } else {
+ // a non-zero return code means there was an error
+ Serial.println("Uh-oh! Something went wrong!");
+ }
+
+ // print out the full response to the serial monitor in all
+ // cases, just for debugging
+ while (UploadFileChoreo.available()) {
+ char c = UploadFileChoreo.read();
+ Serial.print(c);
+ }
+ UploadFileChoreo.close();
+
+ Serial.println("Waiting...");
+ }
+
+ delay(30000); // wait 30 seconds between upload attempts
+}
+
+
+/*
+ A utility function to Base64 encode the specified string
+ by calling a Temboo Utilities Choreo.
+*/
+String base64Encode(String toEncode) {
+
+ // we need a Process object to send a Choreo request to Temboo
+ TembooChoreo Base64EncodeChoreo;
+
+ // invoke the Temboo client
+ Base64EncodeChoreo.begin();
+
+ // set Temboo account credentials
+ Base64EncodeChoreo.setAccountName(TEMBOO_ACCOUNT);
+ Base64EncodeChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME);
+ Base64EncodeChoreo.setAppKey(TEMBOO_APP_KEY);
+
+ // identify the Temboo Library choreo to run (Utilities > Encoding > Base64Encode)
+ Base64EncodeChoreo.setChoreo("/Library/Utilities/Encoding/Base64Encode");
+
+ // set choreo inputs
+ Base64EncodeChoreo.addInput("Text", toEncode);
+
+ // run the choreo
+ Base64EncodeChoreo.run();
+
+ // read in the choreo results, and return the "Base64EncodedText" output value.
+ // see http://www.temboo.com/arduino for more details on using choreo outputs.
+ while(Base64EncodeChoreo.available()) {
+ // read the name of the output item
+ String name = Base64EncodeChoreo.readStringUntil('\x1F');
+ name.trim();
+
+ // read the value of the output item
+ String data = Base64EncodeChoreo.readStringUntil('\x1E');
+ data.trim();
+
+ if(name == "Base64EncodedText") {
+ return data;
+ }
+ }
+}
+
+/*
+ IMPORTANT NOTE: TembooAccount.h:
+
+ TembooAccount.h is a file referenced by this sketch that contains your Temboo account information.
+ You'll need to edit the placeholder version of TembooAccount.h included with this example sketch,
+ by inserting your own Temboo account name and app key information. The contents of the file should
+ look like:
+
+ #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name
+ #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name
+ #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key
+
+ You can find your Temboo App Key information on the Temboo website,
+ under My Account > Application Keys
+
+ The same TembooAccount.h file settings can be used for all Temboo SDK sketches.
+
+ Keeping your account information in a separate file means you can share the main .ino file without worrying
+ that you forgot to delete your credentials.
+*/
diff --git a/libraries/Bridge/examples/TemperatureWebPanel/.DS_Store b/libraries/Bridge/examples/TemperatureWebPanel/.DS_Store
new file mode 100644
index 0000000..5008ddf
--- /dev/null
+++ b/libraries/Bridge/examples/TemperatureWebPanel/.DS_Store
Binary files differ
diff --git a/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino b/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino
new file mode 100644
index 0000000..2149737
--- /dev/null
+++ b/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino
@@ -0,0 +1,121 @@
+/*
+ Temperature web interface
+
+ This example shows how to serve data from an analog input
+ via the Arduino Yún's built-in webserver using the Bridge library.
+
+ The circuit:
+ * TMP36 temperature sensor on analog pin A1
+ * SD card attached to SD card slot of the Arduino Yún
+
+ Prepare your SD card with an empty folder in the SD root
+ named "arduino" and a subfolder of that named "www".
+ This will ensure that the Yún will create a link
+ to the SD to the "/mnt/sd" path.
+
+ In this sketch folder is a basic webpage and a copy of zepto.js, a
+ minimized version of jQuery. When you upload your sketch, these files
+ will be placed in the /arduino/www/TemperatureWebPanel folder on your SD card.
+
+ You can then go to http://arduino.local/sd/TemperatureWebPanel
+ to see the output of this sketch.
+
+ You can remove the SD card while the Linux and the
+ sketch are running but be careful not to remove it while
+ the system is writing to it.
+
+ created 6 July 2013
+ by Tom Igoe
+
+
+ This example code is in the public domain.
+
+ */
+#include <Bridge.h>
+#include <YunServer.h>
+#include <YunClient.h>
+
+// Listen on default port 5555, the webserver on the Yun
+// will forward there all the HTTP requests for us.
+YunServer server;
+String startString;
+long hits = 0;
+
+void setup() {
+ Serial.begin(9600);
+
+ // Bridge startup
+ pinMode(13,OUTPUT);
+ digitalWrite(13, LOW);
+ Bridge.begin();
+ digitalWrite(13, HIGH);
+
+ // using A0 and A2 as vcc and gnd for the TMP36 sensor:
+ pinMode(A0, OUTPUT);
+ pinMode(A2, OUTPUT);
+ digitalWrite(A0, HIGH);
+ digitalWrite(A2, LOW);
+
+ // Listen for incoming connection only from localhost
+ // (no one from the external network could connect)
+ server.listenOnLocalhost();
+ server.begin();
+
+ // get the time that this sketch started:
+ Process startTime;
+ startTime.runShellCommand("date");
+ while(startTime.available()) {
+ char c = startTime.read();
+ startString += c;
+ }
+}
+
+void loop() {
+ // Get clients coming from server
+ YunClient client = server.accept();
+
+ // There is a new client?
+ if (client) {
+ // read the command
+ String command = client.readString();
+ command.trim(); //kill whitespace
+ Serial.println(command);
+ // is "temperature" command?
+ if (command == "temperature") {
+
+ // get the time from the server:
+ Process time;
+ time.runShellCommand("date");
+ String timeString = "";
+ while(time.available()) {
+ char c = time.read();
+ timeString += c;
+ }
+ Serial.println(timeString);
+ int sensorValue = analogRead(A1);
+ // convert the reading to millivolts:
+ float voltage = sensorValue * (5000/ 1024);
+ // convert the millivolts to temperature celsius:
+ float temperature = (voltage - 500)/10;
+ // print the temperature:
+ client.print("Current time on the Yún: ");
+ client.println(timeString);
+ client.print("<br>Current temperature: ");
+ client.print(temperature);
+ client.print(" degrees C");
+ client.print("<br>This sketch has been running since ");
+ client.print(startString);
+ client.print("<br>Hits so far: ");
+ client.print(hits);
+ }
+
+ // Close connection and free resources.
+ client.stop();
+ hits++;
+ }
+
+ delay(50); // Poll every 50ms
+}
+
+
+
diff --git a/libraries/Bridge/examples/TemperatureWebPanel/www/index.html b/libraries/Bridge/examples/TemperatureWebPanel/www/index.html
new file mode 100755
index 0000000..c6b6747
--- /dev/null
+++ b/libraries/Bridge/examples/TemperatureWebPanel/www/index.html
@@ -0,0 +1,16 @@
+<!DOCTYPE html>
+<html>
+ <head>
+ <script type="text/javascript" src="zepto.min.js"></script>
+ <script type="text/javascript">
+ function refresh() {
+ $('#content').load('/arduino/temperature');
+ }
+</script>
+
+ </head>
+ <body onload="setInterval(refresh, 2000);">
+ <span id="content">0</span>
+ </body>
+</html>
+
diff --git a/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js b/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js
new file mode 100755
index 0000000..dbe4e3c
--- /dev/null
+++ b/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js
@@ -0,0 +1,2 @@
+/* Zepto v1.0-1-ga3cab6c - polyfill zepto detect event ajax form fx - zeptojs.com/license */
+(function(a){String.prototype.trim===a&&(String.prototype.trim=function(){return this.replace(/^\s+|\s+$/g,"")}),Array.prototype.reduce===a&&(Array.prototype.reduce=function(b){if(this===void 0||this===null)throw new TypeError;var c=Object(this),d=c.length>>>0,e=0,f;if(typeof b!="function")throw new TypeError;if(d==0&&arguments.length==1)throw new TypeError;if(arguments.length>=2)f=arguments[1];else do{if(e in c){f=c[e++];break}if(++e>=d)throw new TypeError}while(!0);while(e<d)e in c&&(f=b.call(a,f,c[e],e,c)),e++;return f})})();var Zepto=function(){function E(a){return a==null?String(a):y[z.call(a)]||"object"}function F(a){return E(a)=="function"}function G(a){return a!=null&&a==a.window}function H(a){return a!=null&&a.nodeType==a.DOCUMENT_NODE}function I(a){return E(a)=="object"}function J(a){return I(a)&&!G(a)&&a.__proto__==Object.prototype}function K(a){return a instanceof Array}function L(a){return typeof a.length=="number"}function M(a){return g.call(a,function(a){return a!=null})}function N(a){return a.length>0?c.fn.concat.apply([],a):a}function O(a){return a.replace(/::/g,"/").replace(/([A-Z]+)([A-Z][a-z])/g,"$1_$2").replace(/([a-z\d])([A-Z])/g,"$1_$2").replace(/_/g,"-").toLowerCase()}function P(a){return a in j?j[a]:j[a]=new RegExp("(^|\\s)"+a+"(\\s|$)")}function Q(a,b){return typeof b=="number"&&!l[O(a)]?b+"px":b}function R(a){var b,c;return i[a]||(b=h.createElement(a),h.body.appendChild(b),c=k(b,"").getPropertyValue("display"),b.parentNode.removeChild(b),c=="none"&&(c="block"),i[a]=c),i[a]}function S(a){return"children"in a?f.call(a.children):c.map(a.childNodes,function(a){if(a.nodeType==1)return a})}function T(c,d,e){for(b in d)e&&(J(d[b])||K(d[b]))?(J(d[b])&&!J(c[b])&&(c[b]={}),K(d[b])&&!K(c[b])&&(c[b]=[]),T(c[b],d[b],e)):d[b]!==a&&(c[b]=d[b])}function U(b,d){return d===a?c(b):c(b).filter(d)}function V(a,b,c,d){return F(b)?b.call(a,c,d):b}function W(a,b,c){c==null?a.removeAttribute(b):a.setAttribute(b,c)}function X(b,c){var d=b.className,e=d&&d.baseVal!==a;if(c===a)return e?d.baseVal:d;e?d.baseVal=c:b.className=c}function Y(a){var b;try{return a?a=="true"||(a=="false"?!1:a=="null"?null:isNaN(b=Number(a))?/^[\[\{]/.test(a)?c.parseJSON(a):a:b):a}catch(d){return a}}function Z(a,b){b(a);for(var c in a.childNodes)Z(a.childNodes[c],b)}var a,b,c,d,e=[],f=e.slice,g=e.filter,h=window.document,i={},j={},k=h.defaultView.getComputedStyle,l={"column-count":1,columns:1,"font-weight":1,"line-height":1,opacity:1,"z-index":1,zoom:1},m=/^\s*<(\w+|!)[^>]*>/,n=/<(?!area|br|col|embed|hr|img|input|link|meta|param)(([\w:]+)[^>]*)\/>/ig,o=/^(?:body|html)$/i,p=["val","css","html","text","data","width","height","offset"],q=["after","prepend","before","append"],r=h.createElement("table"),s=h.createElement("tr"),t={tr:h.createElement("tbody"),tbody:r,thead:r,tfoot:r,td:s,th:s,"*":h.createElement("div")},u=/complete|loaded|interactive/,v=/^\.([\w-]+)$/,w=/^#([\w-]*)$/,x=/^[\w-]+$/,y={},z=y.toString,A={},B,C,D=h.createElement("div");return A.matches=function(a,b){if(!a||a.nodeType!==1)return!1;var c=a.webkitMatchesSelector||a.mozMatchesSelector||a.oMatchesSelector||a.matchesSelector;if(c)return c.call(a,b);var d,e=a.parentNode,f=!e;return f&&(e=D).appendChild(a),d=~A.qsa(e,b).indexOf(a),f&&D.removeChild(a),d},B=function(a){return a.replace(/-+(.)?/g,function(a,b){return b?b.toUpperCase():""})},C=function(a){return g.call(a,function(b,c){return a.indexOf(b)==c})},A.fragment=function(b,d,e){b.replace&&(b=b.replace(n,"<$1></$2>")),d===a&&(d=m.test(b)&&RegExp.$1),d in t||(d="*");var g,h,i=t[d];return i.innerHTML=""+b,h=c.each(f.call(i.childNodes),function(){i.removeChild(this)}),J(e)&&(g=c(h),c.each(e,function(a,b){p.indexOf(a)>-1?g[a](b):g.attr(a,b)})),h},A.Z=function(a,b){return a=a||[],a.__proto__=c.fn,a.selector=b||"",a},A.isZ=function(a){return a instanceof A.Z},A.init=function(b,d){if(!b)return A.Z();if(F(b))return c(h).ready(b);if(A.isZ(b))return b;var e;if(K(b))e=M(b);else if(I(b))e=[J(b)?c.extend({},b):b],b=null;else if(m.test(b))e=A.fragment(b.trim(),RegExp.$1,d),b=null;else{if(d!==a)return c(d).find(b);e=A.qsa(h,b)}return A.Z(e,b)},c=function(a,b){return A.init(a,b)},c.extend=function(a){var b,c=f.call(arguments,1);return typeof a=="boolean"&&(b=a,a=c.shift()),c.forEach(function(c){T(a,c,b)}),a},A.qsa=function(a,b){var c;return H(a)&&w.test(b)?(c=a.getElementById(RegExp.$1))?[c]:[]:a.nodeType!==1&&a.nodeType!==9?[]:f.call(v.test(b)?a.getElementsByClassName(RegExp.$1):x.test(b)?a.getElementsByTagName(b):a.querySelectorAll(b))},c.contains=function(a,b){return a!==b&&a.contains(b)},c.type=E,c.isFunction=F,c.isWindow=G,c.isArray=K,c.isPlainObject=J,c.isEmptyObject=function(a){var b;for(b in a)return!1;return!0},c.inArray=function(a,b,c){return e.indexOf.call(b,a,c)},c.camelCase=B,c.trim=function(a){return a.trim()},c.uuid=0,c.support={},c.expr={},c.map=function(a,b){var c,d=[],e,f;if(L(a))for(e=0;e<a.length;e++)c=b(a[e],e),c!=null&&d.push(c);else for(f in a)c=b(a[f],f),c!=null&&d.push(c);return N(d)},c.each=function(a,b){var c,d;if(L(a)){for(c=0;c<a.length;c++)if(b.call(a[c],c,a[c])===!1)return a}else for(d in a)if(b.call(a[d],d,a[d])===!1)return a;return a},c.grep=function(a,b){return g.call(a,b)},window.JSON&&(c.parseJSON=JSON.parse),c.each("Boolean Number String Function Array Date RegExp Object Error".split(" "),function(a,b){y["[object "+b+"]"]=b.toLowerCase()}),c.fn={forEach:e.forEach,reduce:e.reduce,push:e.push,sort:e.sort,indexOf:e.indexOf,concat:e.concat,map:function(a){return c(c.map(this,function(b,c){return a.call(b,c,b)}))},slice:function(){return c(f.apply(this,arguments))},ready:function(a){return u.test(h.readyState)?a(c):h.addEventListener("DOMContentLoaded",function(){a(c)},!1),this},get:function(b){return b===a?f.call(this):this[b>=0?b:b+this.length]},toArray:function(){return this.get()},size:function(){return this.length},remove:function(){return this.each(function(){this.parentNode!=null&&this.parentNode.removeChild(this)})},each:function(a){return e.every.call(this,function(b,c){return a.call(b,c,b)!==!1}),this},filter:function(a){return F(a)?this.not(this.not(a)):c(g.call(this,function(b){return A.matches(b,a)}))},add:function(a,b){return c(C(this.concat(c(a,b))))},is:function(a){return this.length>0&&A.matches(this[0],a)},not:function(b){var d=[];if(F(b)&&b.call!==a)this.each(function(a){b.call(this,a)||d.push(this)});else{var e=typeof b=="string"?this.filter(b):L(b)&&F(b.item)?f.call(b):c(b);this.forEach(function(a){e.indexOf(a)<0&&d.push(a)})}return c(d)},has:function(a){return this.filter(function(){return I(a)?c.contains(this,a):c(this).find(a).size()})},eq:function(a){return a===-1?this.slice(a):this.slice(a,+a+1)},first:function(){var a=this[0];return a&&!I(a)?a:c(a)},last:function(){var a=this[this.length-1];return a&&!I(a)?a:c(a)},find:function(a){var b,d=this;return typeof a=="object"?b=c(a).filter(function(){var a=this;return e.some.call(d,function(b){return c.contains(b,a)})}):this.length==1?b=c(A.qsa(this[0],a)):b=this.map(function(){return A.qsa(this,a)}),b},closest:function(a,b){var d=this[0],e=!1;typeof a=="object"&&(e=c(a));while(d&&!(e?e.indexOf(d)>=0:A.matches(d,a)))d=d!==b&&!H(d)&&d.parentNode;return c(d)},parents:function(a){var b=[],d=this;while(d.length>0)d=c.map(d,function(a){if((a=a.parentNode)&&!H(a)&&b.indexOf(a)<0)return b.push(a),a});return U(b,a)},parent:function(a){return U(C(this.pluck("parentNode")),a)},children:function(a){return U(this.map(function(){return S(this)}),a)},contents:function(){return this.map(function(){return f.call(this.childNodes)})},siblings:function(a){return U(this.map(function(a,b){return g.call(S(b.parentNode),function(a){return a!==b})}),a)},empty:function(){return this.each(function(){this.innerHTML=""})},pluck:function(a){return c.map(this,function(b){return b[a]})},show:function(){return this.each(function(){this.style.display=="none"&&(this.style.display=null),k(this,"").getPropertyValue("display")=="none"&&(this.style.display=R(this.nodeName))})},replaceWith:function(a){return this.before(a).remove()},wrap:function(a){var b=F(a);if(this[0]&&!b)var d=c(a).get(0),e=d.parentNode||this.length>1;return this.each(function(f){c(this).wrapAll(b?a.call(this,f):e?d.cloneNode(!0):d)})},wrapAll:function(a){if(this[0]){c(this[0]).before(a=c(a));var b;while((b=a.children()).length)a=b.first();c(a).append(this)}return this},wrapInner:function(a){var b=F(a);return this.each(function(d){var e=c(this),f=e.contents(),g=b?a.call(this,d):a;f.length?f.wrapAll(g):e.append(g)})},unwrap:function(){return this.parent().each(function(){c(this).replaceWith(c(this).children())}),this},clone:function(){return this.map(function(){return this.cloneNode(!0)})},hide:function(){return this.css("display","none")},toggle:function(b){return this.each(function(){var d=c(this);(b===a?d.css("display")=="none":b)?d.show():d.hide()})},prev:function(a){return c(this.pluck("previousElementSibling")).filter(a||"*")},next:function(a){return c(this.pluck("nextElementSibling")).filter(a||"*")},html:function(b){return b===a?this.length>0?this[0].innerHTML:null:this.each(function(a){var d=this.innerHTML;c(this).empty().append(V(this,b,a,d))})},text:function(b){return b===a?this.length>0?this[0].textContent:null:this.each(function(){this.textContent=b})},attr:function(c,d){var e;return typeof c=="string"&&d===a?this.length==0||this[0].nodeType!==1?a:c=="value"&&this[0].nodeName=="INPUT"?this.val():!(e=this[0].getAttribute(c))&&c in this[0]?this[0][c]:e:this.each(function(a){if(this.nodeType!==1)return;if(I(c))for(b in c)W(this,b,c[b]);else W(this,c,V(this,d,a,this.getAttribute(c)))})},removeAttr:function(a){return this.each(function(){this.nodeType===1&&W(this,a)})},prop:function(b,c){return c===a?this[0]&&this[0][b]:this.each(function(a){this[b]=V(this,c,a,this[b])})},data:function(b,c){var d=this.attr("data-"+O(b),c);return d!==null?Y(d):a},val:function(b){return b===a?this[0]&&(this[0].multiple?c(this[0]).find("option").filter(function(a){return this.selected}).pluck("value"):this[0].value):this.each(function(a){this.value=V(this,b,a,this.value)})},offset:function(a){if(a)return this.each(function(b){var d=c(this),e=V(this,a,b,d.offset()),f=d.offsetParent().offset(),g={top:e.top-f.top,left:e.left-f.left};d.css("position")=="static"&&(g.position="relative"),d.css(g)});if(this.length==0)return null;var b=this[0].getBoundingClientRect();return{left:b.left+window.pageXOffset,top:b.top+window.pageYOffset,width:Math.round(b.width),height:Math.round(b.height)}},css:function(a,c){if(arguments.length<2&&typeof a=="string")return this[0]&&(this[0].style[B(a)]||k(this[0],"").getPropertyValue(a));var d="";if(E(a)=="string")!c&&c!==0?this.each(function(){this.style.removeProperty(O(a))}):d=O(a)+":"+Q(a,c);else for(b in a)!a[b]&&a[b]!==0?this.each(function(){this.style.removeProperty(O(b))}):d+=O(b)+":"+Q(b,a[b])+";";return this.each(function(){this.style.cssText+=";"+d})},index:function(a){return a?this.indexOf(c(a)[0]):this.parent().children().indexOf(this[0])},hasClass:function(a){return e.some.call(this,function(a){return this.test(X(a))},P(a))},addClass:function(a){return this.each(function(b){d=[];var e=X(this),f=V(this,a,b,e);f.split(/\s+/g).forEach(function(a){c(this).hasClass(a)||d.push(a)},this),d.length&&X(this,e+(e?" ":"")+d.join(" "))})},removeClass:function(b){return this.each(function(c){if(b===a)return X(this,"");d=X(this),V(this,b,c,d).split(/\s+/g).forEach(function(a){d=d.replace(P(a)," ")}),X(this,d.trim())})},toggleClass:function(b,d){return this.each(function(e){var f=c(this),g=V(this,b,e,X(this));g.split(/\s+/g).forEach(function(b){(d===a?!f.hasClass(b):d)?f.addClass(b):f.removeClass(b)})})},scrollTop:function(){if(!this.length)return;return"scrollTop"in this[0]?this[0].scrollTop:this[0].scrollY},position:function(){if(!this.length)return;var a=this[0],b=this.offsetParent(),d=this.offset(),e=o.test(b[0].nodeName)?{top:0,left:0}:b.offset();return d.top-=parseFloat(c(a).css("margin-top"))||0,d.left-=parseFloat(c(a).css("margin-left"))||0,e.top+=parseFloat(c(b[0]).css("border-top-width"))||0,e.left+=parseFloat(c(b[0]).css("border-left-width"))||0,{top:d.top-e.top,left:d.left-e.left}},offsetParent:function(){return this.map(function(){var a=this.offsetParent||h.body;while(a&&!o.test(a.nodeName)&&c(a).css("position")=="static")a=a.offsetParent;return a})}},c.fn.detach=c.fn.remove,["width","height"].forEach(function(b){c.fn[b]=function(d){var e,f=this[0],g=b.replace(/./,function(a){return a[0].toUpperCase()});return d===a?G(f)?f["inner"+g]:H(f)?f.documentElement["offset"+g]:(e=this.offset())&&e[b]:this.each(function(a){f=c(this),f.css(b,V(this,d,a,f[b]()))})}}),q.forEach(function(a,b){var d=b%2;c.fn[a]=function(){var a,e=c.map(arguments,function(b){return a=E(b),a=="object"||a=="array"||b==null?b:A.fragment(b)}),f,g=this.length>1;return e.length<1?this:this.each(function(a,h){f=d?h:h.parentNode,h=b==0?h.nextSibling:b==1?h.firstChild:b==2?h:null,e.forEach(function(a){if(g)a=a.cloneNode(!0);else if(!f)return c(a).remove();Z(f.insertBefore(a,h),function(a){a.nodeName!=null&&a.nodeName.toUpperCase()==="SCRIPT"&&(!a.type||a.type==="text/javascript")&&!a.src&&window.eval.call(window,a.innerHTML)})})})},c.fn[d?a+"To":"insert"+(b?"Before":"After")]=function(b){return c(b)[a](this),this}}),A.Z.prototype=c.fn,A.uniq=C,A.deserializeValue=Y,c.zepto=A,c}();window.Zepto=Zepto,"$"in window||(window.$=Zepto),function(a){function b(a){var b=this.os={},c=this.browser={},d=a.match(/WebKit\/([\d.]+)/),e=a.match(/(Android)\s+([\d.]+)/),f=a.match(/(iPad).*OS\s([\d_]+)/),g=!f&&a.match(/(iPhone\sOS)\s([\d_]+)/),h=a.match(/(webOS|hpwOS)[\s\/]([\d.]+)/),i=h&&a.match(/TouchPad/),j=a.match(/Kindle\/([\d.]+)/),k=a.match(/Silk\/([\d._]+)/),l=a.match(/(BlackBerry).*Version\/([\d.]+)/),m=a.match(/(BB10).*Version\/([\d.]+)/),n=a.match(/(RIM\sTablet\sOS)\s([\d.]+)/),o=a.match(/PlayBook/),p=a.match(/Chrome\/([\d.]+)/)||a.match(/CriOS\/([\d.]+)/),q=a.match(/Firefox\/([\d.]+)/);if(c.webkit=!!d)c.version=d[1];e&&(b.android=!0,b.version=e[2]),g&&(b.ios=b.iphone=!0,b.version=g[2].replace(/_/g,".")),f&&(b.ios=b.ipad=!0,b.version=f[2].replace(/_/g,".")),h&&(b.webos=!0,b.version=h[2]),i&&(b.touchpad=!0),l&&(b.blackberry=!0,b.version=l[2]),m&&(b.bb10=!0,b.version=m[2]),n&&(b.rimtabletos=!0,b.version=n[2]),o&&(c.playbook=!0),j&&(b.kindle=!0,b.version=j[1]),k&&(c.silk=!0,c.version=k[1]),!k&&b.android&&a.match(/Kindle Fire/)&&(c.silk=!0),p&&(c.chrome=!0,c.version=p[1]),q&&(c.firefox=!0,c.version=q[1]),b.tablet=!!(f||o||e&&!a.match(/Mobile/)||q&&a.match(/Tablet/)),b.phone=!b.tablet&&!!(e||g||h||l||m||p&&a.match(/Android/)||p&&a.match(/CriOS\/([\d.]+)/)||q&&a.match(/Mobile/))}b.call(a,navigator.userAgent),a.__detect=b}(Zepto),function(a){function g(a){return a._zid||(a._zid=d++)}function h(a,b,d,e){b=i(b);if(b.ns)var f=j(b.ns);return(c[g(a)]||[]).filter(function(a){return a&&(!b.e||a.e==b.e)&&(!b.ns||f.test(a.ns))&&(!d||g(a.fn)===g(d))&&(!e||a.sel==e)})}function i(a){var b=(""+a).split(".");return{e:b[0],ns:b.slice(1).sort().join(" ")}}function j(a){return new RegExp("(?:^| )"+a.replace(" "," .* ?")+"(?: |$)")}function k(b,c,d){a.type(b)!="string"?a.each(b,d):b.split(/\s/).forEach(function(a){d(a,c)})}function l(a,b){return a.del&&(a.e=="focus"||a.e=="blur")||!!b}function m(a){return f[a]||a}function n(b,d,e,h,j,n){var o=g(b),p=c[o]||(c[o]=[]);k(d,e,function(c,d){var e=i(c);e.fn=d,e.sel=h,e.e in f&&(d=function(b){var c=b.relatedTarget;if(!c||c!==this&&!a.contains(this,c))return e.fn.apply(this,arguments)}),e.del=j&&j(d,c);var g=e.del||d;e.proxy=function(a){var c=g.apply(b,[a].concat(a.data));return c===!1&&(a.preventDefault(),a.stopPropagation()),c},e.i=p.length,p.push(e),b.addEventListener(m(e.e),e.proxy,l(e,n))})}function o(a,b,d,e,f){var i=g(a);k(b||"",d,function(b,d){h(a,b,d,e).forEach(function(b){delete c[i][b.i],a.removeEventListener(m(b.e),b.proxy,l(b,f))})})}function t(b){var c,d={originalEvent:b};for(c in b)!r.test(c)&&b[c]!==undefined&&(d[c]=b[c]);return a.each(s,function(a,c){d[a]=function(){return this[c]=p,b[a].apply(b,arguments)},d[c]=q}),d}function u(a){if(!("defaultPrevented"in a)){a.defaultPrevented=!1;var b=a.preventDefault;a.preventDefault=function(){this.defaultPrevented=!0,b.call(this)}}}var b=a.zepto.qsa,c={},d=1,e={},f={mouseenter:"mouseover",mouseleave:"mouseout"};e.click=e.mousedown=e.mouseup=e.mousemove="MouseEvents",a.event={add:n,remove:o},a.proxy=function(b,c){if(a.isFunction(b)){var d=function(){return b.apply(c,arguments)};return d._zid=g(b),d}if(typeof c=="string")return a.proxy(b[c],b);throw new TypeError("expected function")},a.fn.bind=function(a,b){return this.each(function(){n(this,a,b)})},a.fn.unbind=function(a,b){return this.each(function(){o(this,a,b)})},a.fn.one=function(a,b){return this.each(function(c,d){n(this,a,b,null,function(a,b){return function(){var c=a.apply(d,arguments);return o(d,b,a),c}})})};var p=function(){return!0},q=function(){return!1},r=/^([A-Z]|layer[XY]$)/,s={preventDefault:"isDefaultPrevented",stopImmediatePropagation:"isImmediatePropagationStopped",stopPropagation:"isPropagationStopped"};a.fn.delegate=function(b,c,d){return this.each(function(e,f){n(f,c,d,b,function(c){return function(d){var e,g=a(d.target).closest(b,f).get(0);if(g)return e=a.extend(t(d),{currentTarget:g,liveFired:f}),c.apply(g,[e].concat([].slice.call(arguments,1)))}})})},a.fn.undelegate=function(a,b,c){return this.each(function(){o(this,b,c,a)})},a.fn.live=function(b,c){return a(document.body).delegate(this.selector,b,c),this},a.fn.die=function(b,c){return a(document.body).undelegate(this.selector,b,c),this},a.fn.on=function(b,c,d){return!c||a.isFunction(c)?this.bind(b,c||d):this.delegate(c,b,d)},a.fn.off=function(b,c,d){return!c||a.isFunction(c)?this.unbind(b,c||d):this.undelegate(c,b,d)},a.fn.trigger=function(b,c){if(typeof b=="string"||a.isPlainObject(b))b=a.Event(b);return u(b),b.data=c,this.each(function(){"dispatchEvent"in this&&this.dispatchEvent(b)})},a.fn.triggerHandler=function(b,c){var d,e;return this.each(function(f,g){d=t(typeof b=="string"?a.Event(b):b),d.data=c,d.target=g,a.each(h(g,b.type||b),function(a,b){e=b.proxy(d);if(d.isImmediatePropagationStopped())return!1})}),e},"focusin focusout load resize scroll unload click dblclick mousedown mouseup mousemove mouseover mouseout mouseenter mouseleave change select keydown keypress keyup error".split(" ").forEach(function(b){a.fn[b]=function(a){return a?this.bind(b,a):this.trigger(b)}}),["focus","blur"].forEach(function(b){a.fn[b]=function(a){return a?this.bind(b,a):this.each(function(){try{this[b]()}catch(a){}}),this}}),a.Event=function(a,b){typeof a!="string"&&(b=a,a=b.type);var c=document.createEvent(e[a]||"Events"),d=!0;if(b)for(var f in b)f=="bubbles"?d=!!b[f]:c[f]=b[f];return c.initEvent(a,d,!0,null,null,null,null,null,null,null,null,null,null,null,null),c.isDefaultPrevented=function(){return this.defaultPrevented},c}}(Zepto),function($){function triggerAndReturn(a,b,c){var d=$.Event(b);return $(a).trigger(d,c),!d.defaultPrevented}function triggerGlobal(a,b,c,d){if(a.global)return triggerAndReturn(b||document,c,d)}function ajaxStart(a){a.global&&$.active++===0&&triggerGlobal(a,null,"ajaxStart")}function ajaxStop(a){a.global&&!--$.active&&triggerGlobal(a,null,"ajaxStop")}function ajaxBeforeSend(a,b){var c=b.context;if(b.beforeSend.call(c,a,b)===!1||triggerGlobal(b,c,"ajaxBeforeSend",[a,b])===!1)return!1;triggerGlobal(b,c,"ajaxSend",[a,b])}function ajaxSuccess(a,b,c){var d=c.context,e="success";c.success.call(d,a,e,b),triggerGlobal(c,d,"ajaxSuccess",[b,c,a]),ajaxComplete(e,b,c)}function ajaxError(a,b,c,d){var e=d.context;d.error.call(e,c,b,a),triggerGlobal(d,e,"ajaxError",[c,d,a]),ajaxComplete(b,c,d)}function ajaxComplete(a,b,c){var d=c.context;c.complete.call(d,b,a),triggerGlobal(c,d,"ajaxComplete",[b,c]),ajaxStop(c)}function empty(){}function mimeToDataType(a){return a&&(a=a.split(";",2)[0]),a&&(a==htmlType?"html":a==jsonType?"json":scriptTypeRE.test(a)?"script":xmlTypeRE.test(a)&&"xml")||"text"}function appendQuery(a,b){return(a+"&"+b).replace(/[&?]{1,2}/,"?")}function serializeData(a){a.processData&&a.data&&$.type(a.data)!="string"&&(a.data=$.param(a.data,a.traditional)),a.data&&(!a.type||a.type.toUpperCase()=="GET")&&(a.url=appendQuery(a.url,a.data))}function parseArguments(a,b,c,d){var e=!$.isFunction(b);return{url:a,data:e?b:undefined,success:e?$.isFunction(c)?c:undefined:b,dataType:e?d||c:c}}function serialize(a,b,c,d){var e,f=$.isArray(b);$.each(b,function(b,g){e=$.type(g),d&&(b=c?d:d+"["+(f?"":b)+"]"),!d&&f?a.add(g.name,g.value):e=="array"||!c&&e=="object"?serialize(a,g,c,b):a.add(b,g)})}var jsonpID=0,document=window.document,key,name,rscript=/<script\b[^<]*(?:(?!<\/script>)<[^<]*)*<\/script>/gi,scriptTypeRE=/^(?:text|application)\/javascript/i,xmlTypeRE=/^(?:text|application)\/xml/i,jsonType="application/json",htmlType="text/html",blankRE=/^\s*$/;$.active=0,$.ajaxJSONP=function(a){if("type"in a){var b="jsonp"+ ++jsonpID,c=document.createElement("script"),d=function(){clearTimeout(g),$(c).remove(),delete window[b]},e=function(c){d();if(!c||c=="timeout")window[b]=empty;ajaxError(null,c||"abort",f,a)},f={abort:e},g;return ajaxBeforeSend(f,a)===!1?(e("abort"),!1):(window[b]=function(b){d(),ajaxSuccess(b,f,a)},c.onerror=function(){e("error")},c.src=a.url.replace(/=\?/,"="+b),$("head").append(c),a.timeout>0&&(g=setTimeout(function(){e("timeout")},a.timeout)),f)}return $.ajax(a)},$.ajaxSettings={type:"GET",beforeSend:empty,success:empty,error:empty,complete:empty,context:null,global:!0,xhr:function(){return new window.XMLHttpRequest},accepts:{script:"text/javascript, application/javascript",json:jsonType,xml:"application/xml, text/xml",html:htmlType,text:"text/plain"},crossDomain:!1,timeout:0,processData:!0,cache:!0},$.ajax=function(options){var settings=$.extend({},options||{});for(key in $.ajaxSettings)settings[key]===undefined&&(settings[key]=$.ajaxSettings[key]);ajaxStart(settings),settings.crossDomain||(settings.crossDomain=/^([\w-]+:)?\/\/([^\/]+)/.test(settings.url)&&RegExp.$2!=window.location.host),settings.url||(settings.url=window.location.toString()),serializeData(settings),settings.cache===!1&&(settings.url=appendQuery(settings.url,"_="+Date.now()));var dataType=settings.dataType,hasPlaceholder=/=\?/.test(settings.url);if(dataType=="jsonp"||hasPlaceholder)return hasPlaceholder||(settings.url=appendQuery(settings.url,"callback=?")),$.ajaxJSONP(settings);var mime=settings.accepts[dataType],baseHeaders={},protocol=/^([\w-]+:)\/\//.test(settings.url)?RegExp.$1:window.location.protocol,xhr=settings.xhr(),abortTimeout;settings.crossDomain||(baseHeaders["X-Requested-With"]="XMLHttpRequest"),mime&&(baseHeaders.Accept=mime,mime.indexOf(",")>-1&&(mime=mime.split(",",2)[0]),xhr.overrideMimeType&&xhr.overrideMimeType(mime));if(settings.contentType||settings.contentType!==!1&&settings.data&&settings.type.toUpperCase()!="GET")baseHeaders["Content-Type"]=settings.contentType||"application/x-www-form-urlencoded";settings.headers=$.extend(baseHeaders,settings.headers||{}),xhr.onreadystatechange=function(){if(xhr.readyState==4){xhr.onreadystatechange=empty,clearTimeout(abortTimeout);var result,error=!1;if(xhr.status>=200&&xhr.status<300||xhr.status==304||xhr.status==0&&protocol=="file:"){dataType=dataType||mimeToDataType(xhr.getResponseHeader("content-type")),result=xhr.responseText;try{dataType=="script"?(1,eval)(result):dataType=="xml"?result=xhr.responseXML:dataType=="json"&&(result=blankRE.test(result)?null:$.parseJSON(result))}catch(e){error=e}error?ajaxError(error,"parsererror",xhr,settings):ajaxSuccess(result,xhr,settings)}else ajaxError(null,xhr.status?"error":"abort",xhr,settings)}};var async="async"in settings?settings.async:!0;xhr.open(settings.type,settings.url,async);for(name in settings.headers)xhr.setRequestHeader(name,settings.headers[name]);return ajaxBeforeSend(xhr,settings)===!1?(xhr.abort(),!1):(settings.timeout>0&&(abortTimeout=setTimeout(function(){xhr.onreadystatechange=empty,xhr.abort(),ajaxError(null,"timeout",xhr,settings)},settings.timeout)),xhr.send(settings.data?settings.data:null),xhr)},$.get=function(a,b,c,d){return $.ajax(parseArguments.apply(null,arguments))},$.post=function(a,b,c,d){var e=parseArguments.apply(null,arguments);return e.type="POST",$.ajax(e)},$.getJSON=function(a,b,c){var d=parseArguments.apply(null,arguments);return d.dataType="json",$.ajax(d)},$.fn.load=function(a,b,c){if(!this.length)return this;var d=this,e=a.split(/\s/),f,g=parseArguments(a,b,c),h=g.success;return e.length>1&&(g.url=e[0],f=e[1]),g.success=function(a){d.html(f?$("<div>").html(a.replace(rscript,"")).find(f):a),h&&h.apply(d,arguments)},$.ajax(g),this};var escape=encodeURIComponent;$.param=function(a,b){var c=[];return c.add=function(a,b){this.push(escape(a)+"="+escape(b))},serialize(c,a,b),c.join("&").replace(/%20/g,"+")}}(Zepto),function(a){a.fn.serializeArray=function(){var b=[],c;return a(Array.prototype.slice.call(this.get(0).elements)).each(function(){c=a(this);var d=c.attr("type");this.nodeName.toLowerCase()!="fieldset"&&!this.disabled&&d!="submit"&&d!="reset"&&d!="button"&&(d!="radio"&&d!="checkbox"||this.checked)&&b.push({name:c.attr("name"),value:c.val()})}),b},a.fn.serialize=function(){var a=[];return this.serializeArray().forEach(function(b){a.push(encodeURIComponent(b.name)+"="+encodeURIComponent(b.value))}),a.join("&")},a.fn.submit=function(b){if(b)this.bind("submit",b);else if(this.length){var c=a.Event("submit");this.eq(0).trigger(c),c.defaultPrevented||this.get(0).submit()}return this}}(Zepto),function(a,b){function s(a){return t(a.replace(/([a-z])([A-Z])/,"$1-$2"))}function t(a){return a.toLowerCase()}function u(a){return d?d+a:t(a)}var c="",d,e,f,g={Webkit:"webkit",Moz:"",O:"o",ms:"MS"},h=window.document,i=h.createElement("div"),j=/^((translate|rotate|scale)(X|Y|Z|3d)?|matrix(3d)?|perspective|skew(X|Y)?)$/i,k,l,m,n,o,p,q,r={};a.each(g,function(a,e){if(i.style[a+"TransitionProperty"]!==b)return c="-"+t(a)+"-",d=e,!1}),k=c+"transform",r[l=c+"transition-property"]=r[m=c+"transition-duration"]=r[n=c+"transition-timing-function"]=r[o=c+"animation-name"]=r[p=c+"animation-duration"]=r[q=c+"animation-timing-function"]="",a.fx={off:d===b&&i.style.transitionProperty===b,speeds:{_default:400,fast:200,slow:600},cssPrefix:c,transitionEnd:u("TransitionEnd"),animationEnd:u("AnimationEnd")},a.fn.animate=function(b,c,d,e){return a.isPlainObject(c)&&(d=c.easing,e=c.complete,c=c.duration),c&&(c=(typeof c=="number"?c:a.fx.speeds[c]||a.fx.speeds._default)/1e3),this.anim(b,c,d,e)},a.fn.anim=function(c,d,e,f){var g,h={},i,t="",u=this,v,w=a.fx.transitionEnd;d===b&&(d=.4),a.fx.off&&(d=0);if(typeof c=="string")h[o]=c,h[p]=d+"s",h[q]=e||"linear",w=a.fx.animationEnd;else{i=[];for(g in c)j.test(g)?t+=g+"("+c[g]+") ":(h[g]=c[g],i.push(s(g)));t&&(h[k]=t,i.push(k)),d>0&&typeof c=="object"&&(h[l]=i.join(", "),h[m]=d+"s",h[n]=e||"linear")}return v=function(b){if(typeof b!="undefined"){if(b.target!==b.currentTarget)return;a(b.target).unbind(w,v)}a(this).css(r),f&&f.call(this)},d>0&&this.bind(w,v),this.size()&&this.get(0).clientLeft,this.css(h),d<=0&&setTimeout(function(){u.each(function(){v.call(this)})},0),this},i=null}(Zepto)
diff --git a/libraries/Bridge/examples/TimeCheck/TimeCheck.ino b/libraries/Bridge/examples/TimeCheck/TimeCheck.ino
new file mode 100644
index 0000000..848ff25
--- /dev/null
+++ b/libraries/Bridge/examples/TimeCheck/TimeCheck.ino
@@ -0,0 +1,82 @@
+
+/*
+ Time Check
+
+ Gets the time from the linino processor via Bridge
+ then parses out hours, minutes and seconds for the Arduino
+ using an Arduino Yún.
+
+ created 27 May 2013
+ modified 21 June 2013
+ By Tom Igoe
+
+ This example code is in the public domain.
+
+ */
+
+
+#include <Process.h>
+
+Process date; // process used to get the date
+int hours, minutes, seconds; // for the results
+int lastSecond = -1; // need an impossible value for comparison
+
+void setup() {
+ Bridge.begin(); // initialize Bridge
+ Serial.begin(9600); // initialize serial
+
+ while(!Serial); // wait for Serial Monitor to open
+ Serial.println("Time Check"); // Title of sketch
+
+ // run an initial date process. Should return:
+ // hh:mm:ss :
+ if (!date.running()) {
+ date.begin("date");
+ date.addParameter("+%T");
+ date.run();
+ }
+}
+
+void loop() {
+
+ if(lastSecond != seconds) { // if a second has passed
+ // print the time:
+ if (hours <= 9) Serial.print("0"); // adjust for 0-9
+ Serial.print(hours);
+ Serial.print(":");
+ if (minutes <= 9) Serial.print("0"); // adjust for 0-9
+ Serial.print(minutes);
+ Serial.print(":");
+ if (seconds <= 9) Serial.print("0"); // adjust for 0-9
+ Serial.println(seconds);
+
+ // restart the date process:
+ if (!date.running()) {
+ date.begin("date");
+ date.addParameter("+%T");
+ date.run();
+ }
+ }
+
+ //if there's a result from the date process, parse it:
+ while (date.available()>0) {
+ // get the result of the date process (should be hh:mm:ss):
+ String timeString = date.readString();
+
+ // find the colons:
+ int firstColon = timeString.indexOf(":");
+ int secondColon= timeString.lastIndexOf(":");
+
+ // get the substrings for hour, minute second:
+ String hourString = timeString.substring(0, firstColon);
+ String minString = timeString.substring(firstColon+1, secondColon);
+ String secString = timeString.substring(secondColon+1);
+
+ // convert to ints,saving the previous second:
+ hours = hourString.toInt();
+ minutes = minString.toInt();
+ lastSecond = seconds; // save to do a time comparison
+ seconds = secString.toInt();
+ }
+
+}
diff --git a/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino
new file mode 100644
index 0000000..5921b70
--- /dev/null
+++ b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino
@@ -0,0 +1,50 @@
+
+/*
+ WiFi Status
+
+ This sketch runs a script called "pretty-wifi-info.lua"
+ installed on your Yún in folder /usr/bin.
+ It prints information about the status of your wifi connection.
+
+ It uses Serial to print, so you need to connect your Yún to your
+ computer using a USB cable and select the appropriate port from
+ the Port menu
+
+ created 18 June 2013
+ By Federico Fissore
+
+ This example code is in the public domain.
+ */
+
+#include <Process.h>
+
+void setup() {
+ Serial.begin(9600); // initialize serial communication
+ while(!Serial); // do nothing until the serial monitor is opened
+
+ Serial.println("Starting bridge...\n");
+ pinMode(13,OUTPUT);
+ digitalWrite(13, LOW);
+ Bridge.begin(); // make contact with the linux processor
+ digitalWrite(13, HIGH); // Led on pin 13 turns on when the bridge is ready
+
+ delay(2000); // wait 2 seconds
+}
+
+void loop() {
+ Process wifiCheck; // initialize a new process
+
+ wifiCheck.runShellCommand("/usr/bin/pretty-wifi-info.lua"); // command you want to run
+
+ // while there's any characters coming back from the
+ // process, print them to the serial monitor:
+ while (wifiCheck.available() > 0) {
+ char c = wifiCheck.read();
+ Serial.print(c);
+ }
+
+ Serial.println();
+
+ delay(5000);
+}
+
diff --git a/libraries/Bridge/examples/XivelyClient/XivelyClient.ino b/libraries/Bridge/examples/XivelyClient/XivelyClient.ino
new file mode 100644
index 0000000..69f979c
--- /dev/null
+++ b/libraries/Bridge/examples/XivelyClient/XivelyClient.ino
@@ -0,0 +1,110 @@
+/*
+ Xively sensor client with Strings
+
+ This sketch connects an analog sensor to Xively,
+ using an Arduino Yún.
+
+ created 15 March 2010
+ updated 27 May 2013
+ by Tom Igoe
+
+ */
+
+// include all Libraries needed:
+#include <Process.h>
+#include "passwords.h" // contains my passwords, see below
+
+/*
+ NOTE: passwords.h is not included with this repo because it contains my passwords.
+ You need to create it for your own version of this application. To do so, make
+ a new tab in Arduino, call it passwords.h, and include the following variables and constants:
+
+ #define APIKEY "foo" // replace your pachube api key here
+ #define FEEDID 0000 // replace your feed ID
+ #define USERAGENT "my-project" // user agent is the project name
+ */
+
+
+// set up net client info:
+const unsigned long postingInterval = 60000; //delay between updates to xively.com
+unsigned long lastRequest = 0; // when you last made a request
+String dataString = "";
+
+void setup() {
+ // start serial port:
+ Bridge.begin();
+ Serial.begin(9600);
+
+ while(!Serial); // wait for Network Serial to open
+ Serial.println("Xively client");
+
+ // Do a first update immediately
+ updateData();
+ sendData();
+ lastRequest = millis();
+}
+
+void loop() {
+ // get a timestamp so you can calculate reading and sending intervals:
+ long now = millis();
+
+ // if the sending interval has passed since your
+ // last connection, then connect again and send data:
+ if (now - lastRequest >= postingInterval) {
+ updateData();
+ sendData();
+ lastRequest = now;
+ }
+}
+
+void updateData() {
+ // convert the readings to a String to send it:
+ dataString = "Temperature,";
+ dataString += random(10) + 20;
+ // add pressure:
+ dataString += "\nPressure,";
+ dataString += random(5) + 100;
+}
+
+// this method makes a HTTP connection to the server:
+void sendData() {
+ // form the string for the API header parameter:
+ String apiString = "X-ApiKey: ";
+ apiString += APIKEY;
+
+ // form the string for the URL parameter:
+ String url = "https://api.xively.com/v2/feeds/";
+ url += FEEDID;
+ url += ".csv";
+
+ // Send the HTTP PUT request
+
+ // Is better to declare the Process here, so when the
+ // sendData function finishes the resources are immediately
+ // released. Declaring it global works too, BTW.
+ Process xively;
+ Serial.print("\n\nSending data... ");
+ xively.begin("curl");
+ xively.addParameter("-k");
+ xively.addParameter("--request");
+ xively.addParameter("PUT");
+ xively.addParameter("--data");
+ xively.addParameter(dataString);
+ xively.addParameter("--header");
+ xively.addParameter(apiString);
+ xively.addParameter(url);
+ xively.run();
+ Serial.println("done!");
+
+ // If there's incoming data from the net connection,
+ // send it out the Serial:
+ while (xively.available()>0) {
+ char c = xively.read();
+ Serial.write(c);
+ }
+
+}
+
+
+
+
diff --git a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
new file mode 100644
index 0000000..faffd93
--- /dev/null
+++ b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino
@@ -0,0 +1,78 @@
+/*
+ Arduino Yun USB-to-Serial
+
+ Allows you to use the Yun's 32U4 processor as a
+ serial terminal for the linino processor.
+
+ Upload this to an Arduino Yun via serial (not WiFi)
+ then open the serial monitor at 115200 to see the boot process
+ of the linino processor. You can also use the serial monitor
+ as a basic command line interface for the linino processor using
+ this sketch.
+
+ From the serial monitor the following commands can be issued:
+
+ '~' followed by '0' -> Set the UART speed to 57600 baud
+ '~' followed by '1' -> Set the UART speed to 115200 baud
+ '~' followed by '2' -> Set the UART speed to 250000 baud
+ '~' followed by '3' -> Set the UART speed to 500000 baud
+ '~' followeb by '~' -> Sends the bridge's shutdown command to
+ obtain the console.
+
+ The circuit:
+ * Arduino Yun
+
+ created March 2013
+ by Massimo Banzi
+ modified by Cristian Maglie
+
+ This example code is in the public domain.
+ */
+
+long lininoBaud = 250000;
+
+void setup() {
+ Serial.begin(115200); // open serial connection via USB-Serial
+ Serial1.begin(lininoBaud); // open serial connection to Linino
+}
+
+boolean commandMode = false;
+
+void loop() {
+ // copy from virtual serial line to uart and vice versa
+ if (Serial.available()) { // got anything from USB-Serial?
+ char c = (char)Serial.read(); // read from USB-serial
+ if (commandMode == false) { // if we aren't in command mode...
+ if (c == '~') { // Tilde '~' key pressed?
+ commandMode = true; // enter in command mode
+ } else {
+ Serial1.write(c); // otherwise write char to Linino
+ }
+ } else { // if we are in command mode...
+ if (c == '0') { // '0' key pressed?
+ Serial1.begin(57600); // set speed to 57600
+ Serial.println("Speed set to 57600");
+ } else if (c == '1') { // '1' key pressed?
+ Serial1.begin(115200); // set speed to 115200
+ Serial.println("Speed set to 115200");
+ } else if (c == '2') { // '2' key pressed?
+ Serial1.begin(250000); // set speed to 250000
+ Serial.println("Speed set to 250000");
+ } else if (c == '3') { // '3' key pressed?
+ Serial1.begin(500000); // set speed to 500000
+ Serial.println("Speed set to 500000");
+ } else if (c == '~') {
+ Serial1.write((uint8_t *)"\xff\0\0\x05XXXXX\x0d\xaf", 11);
+ Serial.println("Sending bridge's shutdown command");
+ } else { // any other key pressed?
+ Serial1.write('~'); // write '~' to Linino
+ Serial1.write(c); // write char to Linino
+ }
+ commandMode = false; // in all cases exit from command mode
+ }
+ }
+ if (Serial1.available()) { // got anything from Linino?
+ char c = (char)Serial1.read(); // read from Linino
+ Serial.write(c); // write to USB-serial
+ }
+} \ No newline at end of file
diff --git a/libraries/Bridge/keywords.txt b/libraries/Bridge/keywords.txt
new file mode 100644
index 0000000..05453b8
--- /dev/null
+++ b/libraries/Bridge/keywords.txt
@@ -0,0 +1,85 @@
+#######################################
+# Syntax Coloring Map For Bridge
+#######################################
+
+#######################################
+# Class (KEYWORD3)
+#######################################
+
+Bridge KEYWORD3
+FileIO KEYWORD3
+FileSystem KEYWORD3
+Console KEYWORD3
+Process KEYWORD3
+Mailbox KEYWORD3
+HttpClient KEYWORD3
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+# methods names in commond
+begin KEYWORD2
+end KEYWORD2
+available KEYWORD2
+read KEYWORD2
+peek KEYWORD2
+write KEYWORD2
+flush KEYWORD2
+bool KEYWORD2
+
+# Bridge Class
+transfer KEYWORD2
+put KEYWORD2
+get KEYWORD2
+
+# Console Class
+buffer KEYWORD2
+noBuffer KEYWORD2
+connected KEYWORD2
+
+# FileIO Class
+File KEYWORD2
+seek KEYWORD2
+position KEYWORD2
+size KEYWORD2
+close KEYWORD2
+name KEYWORD2
+isDirectory KEYWORD2
+openNextFile KEYWORD2
+rewindDirectory KEYWORD2
+
+# Process Class
+addParameter KEYWORD2
+runAsynchronously KEYWORD2
+run KEYWORD2
+running KEYWORD2
+exitValue KEYWORD2
+runShellCommand KEYWORD2
+runShellCommandAsynchronously KEYWORD2
+
+# Mailbox Class
+readMessage KEYWORD2
+writeMessage KEYWORD2
+writeJSON KEYWORD2
+message Available KEYWORD2
+
+# HttpClient Class
+getAsynchronously KEYWORD2
+ready KEYWORD2
+getResult KEYWORD2
+
+# YunServer Class
+accept KEYWORD2
+stop KEYWORD2
+connect KEYWORD2
+connected KEYWORD2
+
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+
+FILE_READ LITERAL1
+FILE_WRITE LITERAL1
+FILE_APPEND LITERAL1
diff --git a/libraries/SpacebrewYun/SpacebrewYun.cpp b/libraries/SpacebrewYun/SpacebrewYun.cpp
new file mode 100644
index 0000000..a2d04a5
--- /dev/null
+++ b/libraries/SpacebrewYun/SpacebrewYun.cpp
@@ -0,0 +1,356 @@
+#include "SpacebrewYun.h"
+
+
+SpacebrewYun::SpacebrewYun(const String& _name, const String& _description) {
+ name = _name;
+ description = _description;
+
+ server = "sandbox.spacebrew.cc";
+ port = 9000;
+
+ _connected = false;
+ _verbose = false;
+ _error_msg = false;
+
+ sub_name = "";
+ sub_msg = "";
+ sub_type = "";
+
+ read_name = false;
+ read_msg = false;
+ sub_name_max = 25;
+ sub_msg_max = 50;
+
+ for ( int i = 0; i < pidLength; i++ ) {
+ pid [i] = '\0';
+ }
+
+ for ( int i = 0; i < sbPidsLen; i++ ) {
+ sbPids [i] = '\0';
+ }
+
+ Console.buffer(64);
+
+}
+
+// boolean SpacebrewYun::_connected = false;
+SpacebrewYun::OnBooleanMessage SpacebrewYun::_onBooleanMessage = NULL;
+SpacebrewYun::OnRangeMessage SpacebrewYun::_onRangeMessage = NULL;
+SpacebrewYun::OnStringMessage SpacebrewYun::_onStringMessage = NULL;
+SpacebrewYun::OnCustomMessage SpacebrewYun::_onCustomMessage = NULL;
+SpacebrewYun::OnSBOpen SpacebrewYun::_onOpen = NULL;
+SpacebrewYun::OnSBClose SpacebrewYun::_onClose = NULL;
+SpacebrewYun::OnSBError SpacebrewYun::_onError = NULL;
+
+void SpacebrewYun::onOpen(OnSBOpen function){
+ _onOpen = function;
+}
+void SpacebrewYun::onClose(OnSBClose function){
+ _onClose = function;
+}
+void SpacebrewYun::onRangeMessage(OnRangeMessage function){
+ _onRangeMessage = function;
+}
+void SpacebrewYun::onStringMessage(OnStringMessage function){
+ _onStringMessage = function;
+}
+void SpacebrewYun::onBooleanMessage(OnBooleanMessage function){
+ _onBooleanMessage = function;
+}
+void SpacebrewYun::onCustomMessage(OnCustomMessage function){
+ _onCustomMessage = function;
+}
+void SpacebrewYun::onError(OnSBError function){
+ _onError = function;
+}
+
+void SpacebrewYun::addPublish(const String& name, const String& type) {
+ Publisher *p = new Publisher();
+ p->name = createString(name.length() + 1);
+ p->type = createString(type.length() + 1);
+ name.toCharArray(p->name, name.length() + 1);
+ type.toCharArray(p->type, type.length() + 1);
+
+ if (publishers == NULL){
+ publishers = p;
+ } else {
+ Publisher *curr = publishers;
+ while(curr->next != NULL){
+ curr = curr->next;
+ }
+ curr->next = p;
+ }
+}
+
+void SpacebrewYun::addSubscribe(const String& name, const String& type) {
+ Subscriber *p = new Subscriber();
+ p->name = createString(name.length() + 1);
+ p->type = createString(type.length() + 1);
+ name.toCharArray(p->name, name.length() + 1);
+ type.toCharArray(p->type, type.length() + 1);
+
+ if (subscribers == NULL){
+ subscribers = p;
+ }
+
+ else {
+ Subscriber *curr = subscribers;
+ while(curr->next != NULL){
+ curr = curr->next;
+ }
+ curr->next = p;
+ }
+}
+
+void SpacebrewYun::connect(String _server, int _port) {
+ server = _server;
+ port = _port;
+
+ killPids();
+
+ brew.begin("python"); // Process should launch the "curl" command
+ brew.addParameter("/usr/lib/python2.7/spacebrew/spacebrew.py"); // Process should launch the "curl" command
+ brew.addParameter("--server");
+ brew.addParameter(server);
+ brew.addParameter("--port");
+ brew.addParameter(String(port));
+ brew.addParameter("-n");
+ brew.addParameter(name);
+ brew.addParameter("-d");
+ brew.addParameter(description);
+
+ if (subscribers != NULL) {
+ Subscriber *curr = subscribers;
+ while(curr != NULL){
+ if (_verbose) {
+ Serial.print(F("Creating subcribers: "));
+ Serial.println(curr->name);
+ }
+
+ brew.addParameter("-s"); // Add the URL parameter to "curl"
+ brew.addParameter(curr->name); // Add the URL parameter to "curl"
+ brew.addParameter(","); // Add the URL parameter to "curl"
+ brew.addParameter(curr->type); // Add the URL parameter to "curl"
+
+ if (curr->next == NULL) curr = NULL;
+ else curr = curr->next;
+ }
+ }
+ if (publishers != NULL) {
+ Publisher *curr = publishers;
+ while(curr != NULL){
+ if (_verbose) {
+ Serial.print(F("Creating publishers: "));
+ Serial.println(curr->name);
+ }
+ brew.addParameter("-p"); // Add the URL parameter to "curl"
+ brew.addParameter(curr->name); // Add the URL parameter to "curl"
+ brew.addParameter(","); // Add the URL parameter to "curl"
+ brew.addParameter(curr->type); // Add the URL parameter to "curl"
+
+ if (curr->next == NULL) curr = NULL;
+ else curr = curr->next;
+ }
+ }
+
+ Console.begin();
+ brew.runAsynchronously();
+ while (!Console) { ; }
+}
+
+void SpacebrewYun::monitor() {
+ while (Console.available() > 0) {
+ char c = Console.read();
+
+ if (c == char(CONNECTION_START) && !_connected) {
+ _connected = true;
+ if (_verbose) {
+ Serial.print(F("Connected to spacebrew server at: "));
+ Serial.println(server);
+ Serial.print(F("Application name set to: "));
+ Serial.println(name);
+ }
+ if (_onOpen != NULL){
+ _onOpen();
+ }
+ }
+ else if (c == char(CONNECTION_END) && _connected) {
+ _connected = false;
+ if (_verbose) {
+ Serial.print(F("Disconnected from spacebrew server at: "));
+ Serial.println(server);
+ }
+ if (_onClose != NULL){
+ _onClose();
+ }
+ }
+
+ if (_verbose) {
+ if (c == char(CONNECTION_ERROR)) {
+ _error_msg = true;
+ Serial.println(F("ERROR :: with Spacebrew.py Connection ::"));
+ }
+ else if (_error_msg && c == char(MSG_END)) {
+ _error_msg = false;
+ Serial.println();
+ }
+ if (_error_msg) {
+ Serial.print(c);
+ }
+ }
+
+ if (_connected) {
+ if (c == char(MSG_START)) {
+ read_name = true;
+ } else if (c == char(MSG_DIV) || sub_name.length() > sub_name_max) {
+ read_name = false;
+ read_msg = true;
+ } else if (c == char(MSG_END) || sub_msg.length() > sub_msg_max) {
+ read_msg = false;
+ onMessage();
+ } else {
+ if (read_name == true) {
+ sub_name += c;
+ } else if (read_msg == true) {
+ sub_msg += c;
+ }
+ else if (_verbose) {
+ Serial.print(c);
+ }
+ }
+ }
+ }
+}
+
+boolean SpacebrewYun::connected() {
+ return SpacebrewYun::_connected;
+}
+
+void SpacebrewYun::verbose(boolean verbose = true) {
+ _verbose = verbose;
+}
+
+void SpacebrewYun::onMessage() {
+ if (subscribers != NULL) {
+ Subscriber *curr = subscribers;
+ while((curr != NULL) && (sub_type == "")){
+ if (sub_name.equals(curr->name) == true) {
+ sub_type = curr->type;
+ }
+ if (curr->next == NULL) curr = NULL;
+ else curr = curr->next;
+ }
+ }
+
+ if ( sub_type.equals("range") ) {
+ if (_onRangeMessage != NULL) {
+ _onRangeMessage( sub_name, int(sub_msg.toInt()) );
+ } else {
+ Serial.println(F("ERROR :: Range message received, no callback method is registered"));
+ }
+ } else if ( sub_type.equals("boolean") ) {
+ if (_onBooleanMessage != NULL) {
+ _onBooleanMessage( sub_name, ( sub_msg.equals("false") ? false : true ) );
+ } else {
+ Serial.println(F("ERROR :: Boolean message received, no callback method is registered"));
+ }
+ } else if ( sub_type.equals("string") ) {
+ if (_onStringMessage != NULL) {
+ _onStringMessage( sub_name, sub_msg );
+ } else {
+ Serial.println(F("ERROR :: String message received, no callback method is registered"));
+ }
+ } else {
+ if (_onCustomMessage != NULL) {
+ _onCustomMessage( sub_name, sub_msg, sub_type );
+ } else {
+ Serial.println(F("ERROR :: Custom message received, no callback method is registered"));
+ }
+ }
+
+ sub_name = "";
+ sub_msg = "";
+ sub_type = "";
+}
+
+
+void SpacebrewYun::send(const String& name, const String& value){
+ Console.print(char(29));
+ Console.print(name);
+ Console.print(char(30));
+ Console.print(value);
+ Console.print(char(31));
+ Console.flush();
+
+ true;
+}
+
+
+/**
+ * method that gets the pid of all spacebrew.py instances running on the linino.
+ */
+void SpacebrewYun::getPids() {
+
+ // request the pid of all python processes
+ pids.begin("python");
+ pids.addParameter("/usr/lib/python2.7/spacebrew/getProcPid.py"); // Process should launch the "curl" command
+ pids.run();
+
+ if (_verbose) {
+ Serial.println(F("Checking if spacebrew process already running"));
+ }
+
+ int sbPidsIndex = 0;
+ int pidCharIndex = 0;
+ char c = '\0';
+
+ while ( pids.available() > 0 ) {
+
+ c = pids.read();
+
+ if ( c >= '0' && c <= '9' ) {
+ pid[pidCharIndex] = c;
+ pidCharIndex = (pidCharIndex + 1) % pidLength;
+ }
+
+ else if ( (c == ' ' || c == '\n') && pidCharIndex > 0) {
+ sbPids[sbPidsIndex] = atoi(pid);
+ if ( sbPidsIndex < (sbPidsLen - 1) ) sbPidsIndex = (sbPidsIndex + 1);
+
+ for( int i = 0; i < pidLength; i++ ){
+ pid[i] = '\0';
+ pidCharIndex = 0;
+ }
+ }
+ }
+}
+
+/**
+ * method that kills all of the spacebrew.py instances that are running
+ * on the linino.
+ */
+void SpacebrewYun::killPids() {
+ getPids();
+ delay(400);
+
+ for (int i = 0; i < sbPidsLen; i ++) {
+ if (sbPids[i] > 0) {
+ char * newPID = itoa(sbPids[i], pid, 10);
+
+ if (_verbose) {
+ Serial.print(F("Stopping existing spacebrew processes with pids: "));
+ Serial.println(newPID);
+ }
+
+ Process p;
+ p.begin("kill");
+ p.addParameter("-9");
+ p.addParameter(newPID); // Process should launch the "curl" command
+ p.run(); // Run the process and wait for its termination
+
+ delay(400);
+ }
+ }
+}
+
+
diff --git a/libraries/SpacebrewYun/SpacebrewYun.h b/libraries/SpacebrewYun/SpacebrewYun.h
new file mode 100644
index 0000000..8fd7bd2
--- /dev/null
+++ b/libraries/SpacebrewYun/SpacebrewYun.h
@@ -0,0 +1,122 @@
+
+#ifndef YUNSPACEBREW_H
+#define YUNSPACEBREW_H
+
+#include "Arduino.h"
+#include <Bridge.h>
+#include <Console.h>
+#include <Process.h>
+
+enum SBmsg {
+ CONNECTION_START = char(28),
+ CONNECTION_END = char(27),
+ CONNECTION_ERROR = char(26),
+ MSG_START = char(29),
+ MSG_DIV = char(30),
+ MSG_END = char(31)
+};
+
+struct Publisher {
+ char *name;
+ char *type;
+ char *defaultValue;
+ Publisher * next;
+};
+
+struct Subscriber{
+ char *name;
+ char *type;
+ Subscriber * next;
+};
+
+int const pidLength = 6;
+int const sbPidsLen = 4;
+
+class SpacebrewYun {
+
+ public:
+
+ SpacebrewYun(const String&, const String&);
+ void addPublish(const String&, const String&);
+ void addSubscribe(const String&, const String&);
+
+ void connect(String, int);
+ void connect() { connect(server, port); };
+ void connect(String _server) { connect(String(_server), port); };
+
+ void monitor();
+ void onMessage();
+
+ boolean connected();
+
+ void send(const String&, const String&);
+ void send(const String& name, char * value) { send(name, String(value)); }
+ void send(const String& name, bool value){ send(name, (value ? "true" : "false")); };
+ void send(const String& name, int value) { send(name, String(value)); };
+ void send(const String& name, long value) { send(name, String(value)); };
+ void send(const String& name, float value) { send(name, String(value)); };
+
+ void verbose(boolean);
+
+ typedef void (*OnBooleanMessage)(String name, boolean value);
+ typedef void (*OnRangeMessage)(String name, int value);
+ typedef void (*OnStringMessage)(String name, String value);
+ typedef void (*OnCustomMessage)(String name, String value, String type);
+ typedef void (*OnSBOpen)();
+ typedef void (*OnSBClose)();
+ typedef void (*OnSBError)(int code, String message);
+
+ void onOpen(OnSBOpen function);
+ void onClose(OnSBClose function);
+ void onRangeMessage(OnRangeMessage function);
+ void onStringMessage(OnStringMessage function);
+ void onBooleanMessage(OnBooleanMessage function);
+ void onCustomMessage(OnCustomMessage function);
+ void onError(OnSBError function);
+
+ private:
+
+ Process brew;
+ String name;
+ String server;
+ String description;
+ boolean _connected;
+ boolean _error_msg;
+ boolean _verbose;
+ int port;
+
+ /**Output should be at least 5 cells**/
+ static OnBooleanMessage _onBooleanMessage;
+ static OnRangeMessage _onRangeMessage;
+ static OnStringMessage _onStringMessage;
+ static OnCustomMessage _onCustomMessage;
+ static OnSBOpen _onOpen;
+ static OnSBClose _onClose;
+ static OnSBError _onError;
+
+ Subscriber * subscribers;
+ Publisher * publishers;
+ String sub_name;
+ String sub_msg;
+ String sub_type;
+
+ boolean read_name;
+ boolean read_msg;
+ int sub_name_max;
+ int sub_msg_max;
+
+ Process pids;
+ char pid [6];
+ int sbPids [4];
+
+ void killPids();
+ void getPids();
+
+ static char * createString(int len){
+ char * out = ( char * )malloc( len + 1 );
+ return out;
+ }
+
+};
+
+#endif
diff --git a/libraries/SpacebrewYun/keywords.txt b/libraries/SpacebrewYun/keywords.txt
new file mode 100644
index 0000000..4494c2b
--- /dev/null
+++ b/libraries/SpacebrewYun/keywords.txt
@@ -0,0 +1,15 @@
+SpacebrewYun KEYWORD1
+addPublish KEYWORD2
+addSubscribe KEYWORD2
+connect KEYWORD2
+verbose KEYWORD2
+monitor KEYWORD2
+onMessage KEYWORD2
+send KEYWORD2
+onRangeMessage KEYWORD2
+onStringMessage KEYWORD2
+onBooleanMessage KEYWORD2
+onCustomMessage KEYWORD2
+onOpen KEYWORD2
+onClose KEYWORD2
+onError KEYWORD2 \ No newline at end of file
diff --git a/libraries/Temboo/Temboo.cpp b/libraries/Temboo/Temboo.cpp
new file mode 100644
index 0000000..1e5e539
--- /dev/null
+++ b/libraries/Temboo/Temboo.cpp
@@ -0,0 +1,64 @@
+/*
+###############################################################################
+#
+# Temboo Arduino Yun library
+#
+# Copyright 2013, Temboo Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
+# either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+#
+###############################################################################
+*/
+
+#include <Temboo.h>
+
+void TembooChoreo::begin() {
+ Process::begin("temboo");
+}
+
+void TembooChoreo::setAccountName(const String& accountName) {
+ addParameter("-a" + accountName);
+}
+
+void TembooChoreo::setAppKeyName(const String& appKeyName) {
+ addParameter("-u" + appKeyName);
+}
+
+void TembooChoreo::setAppKey(const String& appKey) {
+ addParameter("-p" + appKey);
+}
+
+void TembooChoreo::setChoreo(const String& choreo) {
+ addParameter("-c" + choreo);
+}
+
+void TembooChoreo::setCredential(const String& credentialName) {
+ addParameter("-e" + credentialName);
+}
+
+void TembooChoreo::addInput(const String& inputName, const String& inputValue) {
+ addParameter("-i" + inputName + ":" + inputValue);
+}
+
+void TembooChoreo::addOutputFilter(const String& outputName, const String& filterPath, const String& variableName) {
+ addParameter("-o" + outputName + ":" + filterPath + ":" + variableName);
+}
+
+void TembooChoreo::setSettingsFileToWrite(const String& filePath) {
+ addParameter("-w" + filePath);
+}
+
+void TembooChoreo::setSettingsFileToRead(const String& filePath) {
+ addParameter("-r" + filePath);
+}
+
diff --git a/libraries/Temboo/Temboo.h b/libraries/Temboo/Temboo.h
new file mode 100644
index 0000000..2420c86
--- /dev/null
+++ b/libraries/Temboo/Temboo.h
@@ -0,0 +1,44 @@
+/*
+###############################################################################
+#
+# Temboo Arduino Yun library
+#
+# Copyright 2013, Temboo Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
+# either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+#
+###############################################################################
+*/
+
+#ifndef _TEMBOO_H
+#define _TEMBOO_H
+#include <Arduino.h>
+#include <Process.h>
+
+class TembooChoreo : public Process {
+
+ public:
+ void begin();
+ void setAccountName(const String& accountName);
+ void setAppKeyName(const String& appKeyName);
+ void setAppKey(const String& appKey);
+ void setChoreo(const String& choreo);
+ void setCredential(const String& credentialName);
+ void addInput(const String& inputName, const String& inputValue);
+ void addOutputFilter(const String& filterName, const String& filterPath, const String& variableName);
+ void setSettingsFileToWrite(const String& filePath);
+ void setSettingsFileToRead(const String& filePath);
+
+};
+
+#endif
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 11:09:25 +0000