21 files changed, 0 insertions, 5693 deletions

diff --git a/libraries/SD/File.cpp b/libraries/SD/File.cpp
deleted file mode 100644
index 88d9e9a..0000000
--- a/libraries/SD/File.cpp
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
-
- SD - a slightly more friendly wrapper for sdfatlib
-
- This library aims to expose a subset of SD card functionality
- in the form of a higher level "wrapper" object.
-
- License: GNU General Public License V3
-          (Because sdfatlib is licensed with this.)
-
- (C) Copyright 2010 SparkFun Electronics
-
- */
-
-#include <SD.h>
-
-/* for debugging file open/close leaks
-   uint8_t nfilecount=0;
-*/
-
-File::File(SdFile f, const char *n) {
-  // oh man you are kidding me, new() doesnt exist? Ok we do it by hand!
-  _file = (SdFile *)malloc(sizeof(SdFile)); 
-  if (_file) {
-    memcpy(_file, &f, sizeof(SdFile));
-    
-    strncpy(_name, n, 12);
-    _name[12] = 0;
-    
-    /* for debugging file open/close leaks
-       nfilecount++;
-       Serial.print("Created \"");
-       Serial.print(n);
-       Serial.print("\": ");
-       Serial.println(nfilecount, DEC);
-    */
-  }
-}
-
-File::File(void) {
-  _file = 0;
-  _name[0] = 0;
-  //Serial.print("Created empty file object");
-}
-
-File::~File(void) {
-  //  Serial.print("Deleted file object");
-}
-
-// returns a pointer to the file name
-char *File::name(void) {
-  return _name;
-}
-
-// a directory is a special type of file
-boolean File::isDirectory(void) {
-  return (_file && _file->isDir());
-}
-
-
-size_t File::write(uint8_t val) {
-  return write(&val, 1);
-}
-
-size_t File::write(const uint8_t *buf, size_t size) {
-  size_t t;
-  if (!_file) {
-    setWriteError();
-    return 0;
-  }
-  _file->clearWriteError();
-  t = _file->write(buf, size);
-  if (_file->getWriteError()) {
-    setWriteError();
-    return 0;
-  }
-  return t;
-}
-
-int File::peek() {
-  if (! _file) 
-    return 0;
-
-  int c = _file->read();
-  if (c != -1) _file->seekCur(-1);
-  return c;
-}
-
-int File::read() {
-  if (_file) 
-    return _file->read();
-  return -1;
-}
-
-// buffered read for more efficient, high speed reading
-int File::read(void *buf, uint16_t nbyte) {
-  if (_file) 
-    return _file->read(buf, nbyte);
-  return 0;
-}
-
-int File::available() {
-  if (! _file) return 0;
-
-  uint32_t n = size() - position();
-
-  return n > 0X7FFF ? 0X7FFF : n;
-}
-
-void File::flush() {
-  if (_file)
-    _file->sync();
-}
-
-boolean File::seek(uint32_t pos) {
-  if (! _file) return false;
-
-  return _file->seekSet(pos);
-}
-
-uint32_t File::position() {
-  if (! _file) return -1;
-  return _file->curPosition();
-}
-
-uint32_t File::size() {
-  if (! _file) return 0;
-  return _file->fileSize();
-}
-
-void File::close() {
-  if (_file) {
-    _file->close();
-    free(_file); 
-    _file = 0;
-
-    /* for debugging file open/close leaks
-    nfilecount--;
-    Serial.print("Deleted ");
-    Serial.println(nfilecount, DEC);
-    */
-  }
-}
-
-File::operator bool() {
-  if (_file) 
-    return  _file->isOpen();
-  return false;
-}
-
diff --git a/libraries/SD/README.txt b/libraries/SD/README.txt
deleted file mode 100644
index 495ea4c..0000000
--- a/libraries/SD/README.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-
-** SD - a slightly more friendly wrapper for sdfatlib **
-
-This library aims to expose a subset of SD card functionality in the
-form of a higher level "wrapper" object.
-
-License: GNU General Public License V3
-         (Because sdfatlib is licensed with this.)
-
-(C) Copyright 2010 SparkFun Electronics
-
-Now better than ever with optimization, multiple file support, directory handling, etc - ladyada!
-
diff --git a/libraries/SD/SD.cpp b/libraries/SD/SD.cpp
deleted file mode 100644
index c746809..0000000
--- a/libraries/SD/SD.cpp
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
-
- SD - a slightly more friendly wrapper for sdfatlib
-
- This library aims to expose a subset of SD card functionality
- in the form of a higher level "wrapper" object.
-
- License: GNU General Public License V3
-          (Because sdfatlib is licensed with this.)
-
- (C) Copyright 2010 SparkFun Electronics
-
-
- This library provides four key benefits:
-
-   * Including `SD.h` automatically creates a global
-     `SD` object which can be interacted with in a similar
-     manner to other standard global objects like `Serial` and `Ethernet`.
-
-   * Boilerplate initialisation code is contained in one method named 
-     `begin` and no further objects need to be created in order to access
-     the SD card.
-
-   * Calls to `open` can supply a full path name including parent 
-     directories which simplifies interacting with files in subdirectories.
-
-   * Utility methods are provided to determine whether a file exists
-     and to create a directory heirarchy.
-
-
-  Note however that not all functionality provided by the underlying
-  sdfatlib library is exposed.
-
- */
-
-/*
-
-  Implementation Notes
-
-  In order to handle multi-directory path traversal, functionality that 
-  requires this ability is implemented as callback functions.
-
-  Individual methods call the `walkPath` function which performs the actual
-  directory traversal (swapping between two different directory/file handles
-  along the way) and at each level calls the supplied callback function.
-
-  Some types of functionality will take an action at each level (e.g. exists
-  or make directory) which others will only take an action at the bottom
-  level (e.g. open).
-
- */
-
-#include "SD.h"
-
-// Used by `getNextPathComponent`
-#define MAX_COMPONENT_LEN 12 // What is max length?
-#define PATH_COMPONENT_BUFFER_LEN MAX_COMPONENT_LEN+1
-
-bool getNextPathComponent(char *path, unsigned int *p_offset,
-			  char *buffer) {
-  /*
-
-    Parse individual path components from a path.
-
-      e.g. after repeated calls '/foo/bar/baz' will be split
-           into 'foo', 'bar', 'baz'.
-
-    This is similar to `strtok()` but copies the component into the
-    supplied buffer rather than modifying the original string.
-
-
-    `buffer` needs to be PATH_COMPONENT_BUFFER_LEN in size.
-
-    `p_offset` needs to point to an integer of the offset at
-    which the previous path component finished.
-
-    Returns `true` if more components remain.
-
-    Returns `false` if this is the last component.
-      (This means path ended with 'foo' or 'foo/'.)
-
-   */
-
-  // TODO: Have buffer local to this function, so we know it's the
-  //       correct length?
-
-  int bufferOffset = 0;
-
-  int offset = *p_offset;
-
-  // Skip root or other separator
-  if (path[offset] == '/') {
-    offset++;
-  }
-  
-  // Copy the next next path segment
-  while (bufferOffset < MAX_COMPONENT_LEN
-	 && (path[offset] != '/')
-	 && (path[offset] != '\0')) {
-    buffer[bufferOffset++] = path[offset++];
-  }
-
-  buffer[bufferOffset] = '\0';
-
-  // Skip trailing separator so we can determine if this
-  // is the last component in the path or not.
-  if (path[offset] == '/') {
-    offset++;
-  }
-
-  *p_offset = offset;
-
-  return (path[offset] != '\0');
-}
-
-
-
-boolean walkPath(char *filepath, SdFile& parentDir,
-		 boolean (*callback)(SdFile& parentDir,
-				     char *filePathComponent,
-				     boolean isLastComponent,
-				     void *object),
-		 void *object = NULL) {
-  /*
-     
-     When given a file path (and parent directory--normally root),
-     this function traverses the directories in the path and at each
-     level calls the supplied callback function while also providing
-     the supplied object for context if required.
-
-       e.g. given the path '/foo/bar/baz'
-            the callback would be called at the equivalent of
-	    '/foo', '/foo/bar' and '/foo/bar/baz'.
-
-     The implementation swaps between two different directory/file
-     handles as it traverses the directories and does not use recursion
-     in an attempt to use memory efficiently.
-
-     If a callback wishes to stop the directory traversal it should
-     return false--in this case the function will stop the traversal,
-     tidy up and return false.
-
-     If a directory path doesn't exist at some point this function will
-     also return false and not subsequently call the callback.
-
-     If a directory path specified is complete, valid and the callback
-     did not indicate the traversal should be interrupted then this
-     function will return true.
-
-   */
-
-
-  SdFile subfile1;
-  SdFile subfile2;
-
-  char buffer[PATH_COMPONENT_BUFFER_LEN]; 
-
-  unsigned int offset = 0;
-
-  SdFile *p_parent;
-  SdFile *p_child;
-
-  SdFile *p_tmp_sdfile;  
-  
-  p_child = &subfile1;
-  
-  p_parent = &parentDir;
-
-  while (true) {
-
-    boolean moreComponents = getNextPathComponent(filepath, &offset, buffer);
-
-    boolean shouldContinue = callback((*p_parent), buffer, !moreComponents, object);
-
-    if (!shouldContinue) {
-      // TODO: Don't repeat this code?
-      // If it's one we've created then we
-      // don't need the parent handle anymore.
-      if (p_parent != &parentDir) {
-        (*p_parent).close();
-      }
-      return false;
-    }
-    
-    if (!moreComponents) {
-      break;
-    }
-    
-    boolean exists = (*p_child).open(*p_parent, buffer, O_RDONLY);
-
-    // If it's one we've created then we
-    // don't need the parent handle anymore.
-    if (p_parent != &parentDir) {
-      (*p_parent).close();
-    }
-    
-    // Handle case when it doesn't exist and we can't continue...
-    if (exists) {
-      // We alternate between two file handles as we go down
-      // the path.
-      if (p_parent == &parentDir) {
-        p_parent = &subfile2;
-      }
-
-      p_tmp_sdfile = p_parent;
-      p_parent = p_child;
-      p_child = p_tmp_sdfile;
-    } else {
-      return false;
-    }
-  }
-  
-  if (p_parent != &parentDir) {
-    (*p_parent).close(); // TODO: Return/ handle different?
-  }
-
-  return true;
-}
-
-
-
-/*
-
-   The callbacks used to implement various functionality follow.
-
-   Each callback is supplied with a parent directory handle,
-   character string with the name of the current file path component,
-   a flag indicating if this component is the last in the path and
-   a pointer to an arbitrary object used for context.
-
- */
-
-boolean callback_pathExists(SdFile& parentDir, char *filePathComponent, 
-			    boolean isLastComponent, void *object) {
-  /*
-
-    Callback used to determine if a file/directory exists in parent
-    directory.
-
-    Returns true if file path exists.
-
-  */
-  SdFile child;
-
-  boolean exists = child.open(parentDir, filePathComponent, O_RDONLY);
-  
-  if (exists) {
-     child.close(); 
-  }
-  
-  return exists;
-}
-
-
-
-boolean callback_makeDirPath(SdFile& parentDir, char *filePathComponent, 
-			     boolean isLastComponent, void *object) {
-  /*
-
-    Callback used to create a directory in the parent directory if
-    it does not already exist.
-
-    Returns true if a directory was created or it already existed.
-
-  */
-  boolean result = false;
-  SdFile child;
-  
-  result = callback_pathExists(parentDir, filePathComponent, isLastComponent, object);
-  if (!result) {
-    result = child.makeDir(parentDir, filePathComponent);
-  } 
-  
-  return result;
-}
-
-
-  /*
-
-boolean callback_openPath(SdFile& parentDir, char *filePathComponent, 
-			  boolean isLastComponent, void *object) {
-
-    Callback used to open a file specified by a filepath that may
-    specify one or more directories above it.
-
-    Expects the context object to be an instance of `SDClass` and
-    will use the `file` property of the instance to open the requested
-    file/directory with the associated file open mode property.
-
-    Always returns true if the directory traversal hasn't reached the
-    bottom of the directory heirarchy.
-
-    Returns false once the file has been opened--to prevent the traversal
-    from descending further. (This may be unnecessary.)
-
-  if (isLastComponent) {
-    SDClass *p_SD = static_cast<SDClass*>(object);
-    p_SD->file.open(parentDir, filePathComponent, p_SD->fileOpenMode);
-    if (p_SD->fileOpenMode == FILE_WRITE) {
-      p_SD->file.seekSet(p_SD->file.fileSize());
-    }
-    // TODO: Return file open result?
-    return false;
-  }
-  return true;
-}
-  */
-
-
-
-boolean callback_remove(SdFile& parentDir, char *filePathComponent, 
-			boolean isLastComponent, void *object) {
-  if (isLastComponent) {
-    return SdFile::remove(parentDir, filePathComponent);
-  }
-  return true;
-}
-
-boolean callback_rmdir(SdFile& parentDir, char *filePathComponent, 
-			boolean isLastComponent, void *object) {
-  if (isLastComponent) {
-    SdFile f;
-    if (!f.open(parentDir, filePathComponent, O_READ)) return false;
-    return f.rmDir();
-  }
-  return true;
-}
-
-
-
-/* Implementation of class used to create `SDCard` object. */
-
-
-
-boolean SDClass::begin(uint8_t csPin) {
-  /*
-
-    Performs the initialisation required by the sdfatlib library.
-
-    Return true if initialization succeeds, false otherwise.
-
-   */
-  return card.init(SPI_HALF_SPEED, csPin) &&
-         volume.init(card) &&
-         root.openRoot(volume);
-}
-
-
-
-// this little helper is used to traverse paths
-SdFile SDClass::getParentDir(const char *filepath, int *index) {
-  // get parent directory
-  SdFile d1 = root; // start with the mostparent, root!
-  SdFile d2;
-
-  // we'll use the pointers to swap between the two objects
-  SdFile *parent = &d1;
-  SdFile *subdir = &d2;
-  
-  const char *origpath = filepath;
-
-  while (strchr(filepath, '/')) {
-
-    // get rid of leading /'s
-    if (filepath[0] == '/') {
-      filepath++;
-      continue;
-    }
-    
-    if (! strchr(filepath, '/')) {
-      // it was in the root directory, so leave now
-      break;
-    }
-
-    // extract just the name of the next subdirectory
-    uint8_t idx = strchr(filepath, '/') - filepath;
-    if (idx > 12)
-      idx = 12;    // dont let them specify long names
-    char subdirname[13];
-    strncpy(subdirname, filepath, idx);
-    subdirname[idx] = 0;
-
-    // close the subdir (we reuse them) if open
-    subdir->close();
-    if (! subdir->open(parent, subdirname, O_READ)) {
-      // failed to open one of the subdirectories
-      return SdFile();
-    }
-    // move forward to the next subdirectory
-    filepath += idx;
-
-    // we reuse the objects, close it.
-    parent->close();
-
-    // swap the pointers
-    SdFile *t = parent;
-    parent = subdir;
-    subdir = t;
-  }
-
-  *index = (int)(filepath - origpath);
-  // parent is now the parent diretory of the file!
-  return *parent;
-}
-
-
-File SDClass::open(const char *filepath, uint8_t mode) {
-  /*
-
-     Open the supplied file path for reading or writing.
-
-     The file content can be accessed via the `file` property of
-     the `SDClass` object--this property is currently
-     a standard `SdFile` object from `sdfatlib`.
-
-     Defaults to read only.
-
-     If `write` is true, default action (when `append` is true) is to
-     append data to the end of the file.
-
-     If `append` is false then the file will be truncated first.
-
-     If the file does not exist and it is opened for writing the file
-     will be created.
-
-     An attempt to open a file for reading that does not exist is an
-     error.
-
-   */
-
-  int pathidx;
-
-  // do the interative search
-  SdFile parentdir = getParentDir(filepath, &pathidx);
-  // no more subdirs!
-
-  filepath += pathidx;
-
-  if (! filepath[0]) {
-    // it was the directory itself!
-    return File(parentdir, "/");
-  }
-
-  // Open the file itself
-  SdFile file;
-
-  // failed to open a subdir!
-  if (!parentdir.isOpen())
-    return File();
-
-  // there is a special case for the Root directory since its a static dir
-  if (parentdir.isRoot()) {
-    if ( ! file.open(SD.root, filepath, mode)) {
-      // failed to open the file :(
-      return File();
-    }
-    // dont close the root!
-  } else {
-    if ( ! file.open(parentdir, filepath, mode)) {
-      return File();
-    }
-    // close the parent
-    parentdir.close();
-  }
-
-  if (mode & (O_APPEND | O_WRITE)) 
-    file.seekSet(file.fileSize());
-  return File(file, filepath);
-}
-
-
-/*
-File SDClass::open(char *filepath, uint8_t mode) {
-  //
-
-     Open the supplied file path for reading or writing.
-
-     The file content can be accessed via the `file` property of
-     the `SDClass` object--this property is currently
-     a standard `SdFile` object from `sdfatlib`.
-
-     Defaults to read only.
-
-     If `write` is true, default action (when `append` is true) is to
-     append data to the end of the file.
-
-     If `append` is false then the file will be truncated first.
-
-     If the file does not exist and it is opened for writing the file
-     will be created.
-
-     An attempt to open a file for reading that does not exist is an
-     error.
-
-   //
-
-  // TODO: Allow for read&write? (Possibly not, as it requires seek.)
-
-  fileOpenMode = mode;
-  walkPath(filepath, root, callback_openPath, this);
-
-  return File();
-
-}
-*/
-
-
-//boolean SDClass::close() {
-//  /*
-//
-//    Closes the file opened by the `open` method.
-//
-//   */
-//  file.close();
-//}
-
-
-boolean SDClass::exists(char *filepath) {
-  /*
-
-     Returns true if the supplied file path exists.
-
-   */
-  return walkPath(filepath, root, callback_pathExists);
-}
-
-
-//boolean SDClass::exists(char *filepath, SdFile& parentDir) {
-//  /*
-//
-//     Returns true if the supplied file path rooted at `parentDir`
-//     exists.
-//
-//   */
-//  return walkPath(filepath, parentDir, callback_pathExists);
-//}
-
-
-boolean SDClass::mkdir(char *filepath) {
-  /*
-  
-    Makes a single directory or a heirarchy of directories.
-
-    A rough equivalent to `mkdir -p`.
-  
-   */
-  return walkPath(filepath, root, callback_makeDirPath);
-}
-
-boolean SDClass::rmdir(char *filepath) {
-  /*
-  
-    Makes a single directory or a heirarchy of directories.
-
-    A rough equivalent to `mkdir -p`.
-  
-   */
-  return walkPath(filepath, root, callback_rmdir);
-}
-
-boolean SDClass::remove(char *filepath) {
-  return walkPath(filepath, root, callback_remove);
-}
-
-
-// allows you to recurse into a directory
-File File::openNextFile(uint8_t mode) {
-  dir_t p;
-
-  //Serial.print("\t\treading dir...");
-  while (_file->readDir(&p) > 0) {
-
-    // done if past last used entry
-    if (p.name[0] == DIR_NAME_FREE) {
-      //Serial.println("end");
-      return File();
-    }
-
-    // skip deleted entry and entries for . and  ..
-    if (p.name[0] == DIR_NAME_DELETED || p.name[0] == '.') {
-      //Serial.println("dots");
-      continue;
-    }
-
-    // only list subdirectories and files
-    if (!DIR_IS_FILE_OR_SUBDIR(&p)) {
-      //Serial.println("notafile");
-      continue;
-    }
-
-    // print file name with possible blank fill
-    SdFile f;
-    char name[13];
-    _file->dirName(p, name);
-    //Serial.print("try to open file ");
-    //Serial.println(name);
-
-    if (f.open(_file, name, mode)) {
-      //Serial.println("OK!");
-      return File(f, name);    
-    } else {
-      //Serial.println("ugh");
-      return File();
-    }
-  }
-
-  //Serial.println("nothing");
-  return File();
-}
-
-void File::rewindDirectory(void) {  
-  if (isDirectory())
-    _file->rewind();
-}
-
-SDClass SD;
diff --git a/libraries/SD/SD.h b/libraries/SD/SD.h
deleted file mode 100644
index f21ec0f..0000000
--- a/libraries/SD/SD.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
-
- SD - a slightly more friendly wrapper for sdfatlib
-
- This library aims to expose a subset of SD card functionality
- in the form of a higher level "wrapper" object.
-
- License: GNU General Public License V3
-          (Because sdfatlib is licensed with this.)
-
- (C) Copyright 2010 SparkFun Electronics
-
- */
-
-#ifndef __SD_H__
-#define __SD_H__
-
-#include <Arduino.h>
-
-#include <utility/SdFat.h>
-#include <utility/SdFatUtil.h>
-
-#define FILE_READ O_READ
-#define FILE_WRITE (O_READ | O_WRITE | O_CREAT)
-
-class File : public Stream {
- private:
-  char _name[13]; // our name
-  SdFile *_file;  // underlying file pointer
-
-public:
-  File(SdFile f, const char *name);     // wraps an underlying SdFile
-  File(void);      // 'empty' constructor
-  ~File(void);     // destructor
-  virtual size_t write(uint8_t);
-  virtual size_t write(const uint8_t *buf, size_t size);
-  virtual int read();
-  virtual int peek();
-  virtual int available();
-  virtual void flush();
-  int read(void *buf, uint16_t nbyte);
-  boolean seek(uint32_t pos);
-  uint32_t position();
-  uint32_t size();
-  void close();
-  operator bool();
-  char * name();
-
-  boolean isDirectory(void);
-  File openNextFile(uint8_t mode = O_RDONLY);
-  void rewindDirectory(void);
-  
-  using Print::write;
-};
-
-class SDClass {
-
-private:
-  // These are required for initialisation and use of sdfatlib
-  Sd2Card card;
-  SdVolume volume;
-  SdFile root;
-  
-  // my quick&dirty iterator, should be replaced
-  SdFile getParentDir(const char *filepath, int *indx);
-public:
-  // This needs to be called to set up the connection to the SD card
-  // before other methods are used.
-  boolean begin(uint8_t csPin = SD_CHIP_SELECT_PIN);
-  
-  // Open the specified file/directory with the supplied mode (e.g. read or
-  // write, etc). Returns a File object for interacting with the file.
-  // Note that currently only one file can be open at a time.
-  File open(const char *filename, uint8_t mode = FILE_READ);
-
-  // Methods to determine if the requested file path exists.
-  boolean exists(char *filepath);
-
-  // Create the requested directory heirarchy--if intermediate directories
-  // do not exist they will be created.
-  boolean mkdir(char *filepath);
-  
-  // Delete the file.
-  boolean remove(char *filepath);
-  
-  boolean rmdir(char *filepath);
-
-private:
-
-  // This is used to determine the mode used to open a file
-  // it's here because it's the easiest place to pass the 
-  // information through the directory walking function. But
-  // it's probably not the best place for it.
-  // It shouldn't be set directly--it is set via the parameters to `open`.
-  int fileOpenMode;
-  
-  friend class File;
-  friend boolean callback_openPath(SdFile&, char *, boolean, void *); 
-};
-
-extern SDClass SD;
-
-#endif
diff --git a/libraries/SD/examples/CardInfo/CardInfo.ino b/libraries/SD/examples/CardInfo/CardInfo.ino
deleted file mode 100644
index 0c2dfc5..0000000
--- a/libraries/SD/examples/CardInfo/CardInfo.ino
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
-  SD card test 
-   
- This example shows how use the utility libraries on which the'
- SD library is based in order to get info about your SD card.
- Very useful for testing a card when you're not sure whether its working or not.
- 	
- The circuit:
-  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila
- ** MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila
- ** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila
- ** CS - depends on your SD card shield or module. 
- 		Pin 4 used here for consistency with other Arduino examples
-
- 
- created  28 Mar 2011
- by Limor Fried 
- modified 9 Apr 2012
- by Tom Igoe
- */
- // include the SD library:
-#include <SD.h>
-
-// set up variables using the SD utility library functions:
-Sd2Card card;
-SdVolume volume;
-SdFile root;
-
-// change this to match your SD shield or module;
-// Arduino Ethernet shield: pin 4
-// Adafruit SD shields and modules: pin 10
-// Sparkfun SD shield: pin 8
-const int chipSelect = 4;    
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("\nInitializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);     // change this to 53 on a mega
-
-
-  // we'll use the initialization code from the utility libraries
-  // since we're just testing if the card is working!
-  if (!card.init(SPI_HALF_SPEED, chipSelect)) {
-    Serial.println("initialization failed. Things to check:");
-    Serial.println("* is a card is inserted?");
-    Serial.println("* Is your wiring correct?");
-    Serial.println("* did you change the chipSelect pin to match your shield or module?");
-    return;
-  } else {
-   Serial.println("Wiring is correct and a card is present."); 
-  }
-
-  // print the type of card
-  Serial.print("\nCard type: ");
-  switch(card.type()) {
-    case SD_CARD_TYPE_SD1:
-      Serial.println("SD1");
-      break;
-    case SD_CARD_TYPE_SD2:
-      Serial.println("SD2");
-      break;
-    case SD_CARD_TYPE_SDHC:
-      Serial.println("SDHC");
-      break;
-    default:
-      Serial.println("Unknown");
-  }
-
-  // Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32
-  if (!volume.init(card)) {
-    Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
-    return;
-  }
-
-
-  // print the type and size of the first FAT-type volume
-  uint32_t volumesize;
-  Serial.print("\nVolume type is FAT");
-  Serial.println(volume.fatType(), DEC);
-  Serial.println();
-  
-  volumesize = volume.blocksPerCluster();    // clusters are collections of blocks
-  volumesize *= volume.clusterCount();       // we'll have a lot of clusters
-  volumesize *= 512;                            // SD card blocks are always 512 bytes
-  Serial.print("Volume size (bytes): ");
-  Serial.println(volumesize);
-  Serial.print("Volume size (Kbytes): ");
-  volumesize /= 1024;
-  Serial.println(volumesize);
-  Serial.print("Volume size (Mbytes): ");
-  volumesize /= 1024;
-  Serial.println(volumesize);
-
-  
-  Serial.println("\nFiles found on the card (name, date and size in bytes): ");
-  root.openRoot(volume);
-  
-  // list all files in the card with date and size
-  root.ls(LS_R | LS_DATE | LS_SIZE);
-}
-
-
-void loop(void) {
-  
-}
diff --git a/libraries/SD/examples/Datalogger/Datalogger.ino b/libraries/SD/examples/Datalogger/Datalogger.ino
deleted file mode 100644
index a7f85ee..0000000
--- a/libraries/SD/examples/Datalogger/Datalogger.ino
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-  SD card datalogger
- 
- This example shows how to log data from three analog sensors 
- to an SD card using the SD library.
- 	
- The circuit:
- * analog sensors on analog ins 0, 1, and 2
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created  24 Nov 2010
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-
-#include <SD.h>
-
-// On the Ethernet Shield, CS is pin 4. Note that even if it's not
-// used as the CS pin, the hardware CS pin (10 on most Arduino boards,
-// 53 on the Mega) must be left as an output or the SD library
-// functions will not work.
-const int chipSelect = 4;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // make sure that the default chip select pin is set to
-  // output, even if you don't use it:
-  pinMode(10, OUTPUT);
-  
-  // see if the card is present and can be initialized:
-  if (!SD.begin(chipSelect)) {
-    Serial.println("Card failed, or not present");
-    // don't do anything more:
-    return;
-  }
-  Serial.println("card initialized.");
-}
-
-void loop()
-{
-  // make a string for assembling the data to log:
-  String dataString = "";
-
-  // read three sensors and append to the string:
-  for (int analogPin = 0; analogPin < 3; analogPin++) {
-    int sensor = analogRead(analogPin);
-    dataString += String(sensor);
-    if (analogPin < 2) {
-      dataString += ","; 
-    }
-  }
-
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  File dataFile = SD.open("datalog.txt", FILE_WRITE);
-
-  // if the file is available, write to it:
-  if (dataFile) {
-    dataFile.println(dataString);
-    dataFile.close();
-    // print to the serial port too:
-    Serial.println(dataString);
-  }  
-  // if the file isn't open, pop up an error:
-  else {
-    Serial.println("error opening datalog.txt");
-  } 
-}
-
-
-
-
-
-
-
-
-
diff --git a/libraries/SD/examples/DumpFile/DumpFile.ino b/libraries/SD/examples/DumpFile/DumpFile.ino
deleted file mode 100644
index d83089a..0000000
--- a/libraries/SD/examples/DumpFile/DumpFile.ino
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-  SD card file dump
- 
- This example shows how to read a file from the SD card using the
- SD library and send it over the serial port.
- 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created  22 December 2010
- by Limor Fried
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-
-#include <SD.h>
-
-// On the Ethernet Shield, CS is pin 4. Note that even if it's not
-// used as the CS pin, the hardware CS pin (10 on most Arduino boards,
-// 53 on the Mega) must be left as an output or the SD library
-// functions will not work.
-const int chipSelect = 4;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // make sure that the default chip select pin is set to
-  // output, even if you don't use it:
-  pinMode(10, OUTPUT);
-  
-  // see if the card is present and can be initialized:
-  if (!SD.begin(chipSelect)) {
-    Serial.println("Card failed, or not present");
-    // don't do anything more:
-    return;
-  }
-  Serial.println("card initialized.");
-  
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  File dataFile = SD.open("datalog.txt");
-
-  // if the file is available, write to it:
-  if (dataFile) {
-    while (dataFile.available()) {
-      Serial.write(dataFile.read());
-    }
-    dataFile.close();
-  }  
-  // if the file isn't open, pop up an error:
-  else {
-    Serial.println("error opening datalog.txt");
-  } 
-}
-
-void loop()
-{
-}
-
diff --git a/libraries/SD/examples/Files/Files.ino b/libraries/SD/examples/Files/Files.ino
deleted file mode 100644
index a15b862..0000000
--- a/libraries/SD/examples/Files/Files.ino
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-  SD card basic file example
- 
- This example shows how to create and destroy an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-#include <SD.h>
-
-File myFile;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);
-
-  if (!SD.begin(4)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-
-  if (SD.exists("example.txt")) {
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");
-  }
-
-  // open a new file and immediately close it:
-  Serial.println("Creating example.txt...");
-  myFile = SD.open("example.txt", FILE_WRITE);
-  myFile.close();
-
-  // Check to see if the file exists: 
-  if (SD.exists("example.txt")) {
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");  
-  }
-
-  // delete the file:
-  Serial.println("Removing example.txt...");
-  SD.remove("example.txt");
-
-  if (SD.exists("example.txt")){ 
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");  
-  }
-}
-
-void loop()
-{
-  // nothing happens after setup finishes.
-}
-
-
-
diff --git a/libraries/SD/examples/ReadWrite/ReadWrite.ino b/libraries/SD/examples/ReadWrite/ReadWrite.ino
deleted file mode 100644
index 5805fc8..0000000
--- a/libraries/SD/examples/ReadWrite/ReadWrite.ino
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-  SD card read/write
- 
- This example shows how to read and write data to and from an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
- 
-#include <SD.h>
-
-File myFile;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-   pinMode(10, OUTPUT);
-   
-  if (!SD.begin(4)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-  
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  myFile = SD.open("test.txt", FILE_WRITE);
-  
-  // if the file opened okay, write to it:
-  if (myFile) {
-    Serial.print("Writing to test.txt...");
-    myFile.println("testing 1, 2, 3.");
-	// close the file:
-    myFile.close();
-    Serial.println("done.");
-  } else {
-    // if the file didn't open, print an error:
-    Serial.println("error opening test.txt");
-  }
-  
-  // re-open the file for reading:
-  myFile = SD.open("test.txt");
-  if (myFile) {
-    Serial.println("test.txt:");
-    
-    // read from the file until there's nothing else in it:
-    while (myFile.available()) {
-    	Serial.write(myFile.read());
-    }
-    // close the file:
-    myFile.close();
-  } else {
-  	// if the file didn't open, print an error:
-    Serial.println("error opening test.txt");
-  }
-}
-
-void loop()
-{
-	// nothing happens after setup
-}
-
-
diff --git a/libraries/SD/examples/listfiles/listfiles.ino b/libraries/SD/examples/listfiles/listfiles.ino
deleted file mode 100644
index 876c3f8..0000000
--- a/libraries/SD/examples/listfiles/listfiles.ino
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-  SD card basic file example
- 
- This example shows how to create and destroy an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-#include <SD.h>
-
-File root;
-
-void setup()
-{
-  // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);
-
-  if (!SD.begin(10)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-
-  root = SD.open("/");
-  
-  printDirectory(root, 0);
-  
-  Serial.println("done!");
-}
-
-void loop()
-{
-  // nothing happens after setup finishes.
-}
-
-void printDirectory(File dir, int numTabs) {
-   while(true) {
-     
-     File entry =  dir.openNextFile();
-     if (! entry) {
-       // no more files
-       //Serial.println("**nomorefiles**");
-       break;
-     }
-     for (uint8_t i=0; i<numTabs; i++) {
-       Serial.print('\t');
-     }
-     Serial.print(entry.name());
-     if (entry.isDirectory()) {
-       Serial.println("/");
-       printDirectory(entry, numTabs+1);
-     } else {
-       // files have sizes, directories do not
-       Serial.print("\t\t");
-       Serial.println(entry.size(), DEC);
-     }
-   }
-}
-
-
-
diff --git a/libraries/SD/keywords.txt b/libraries/SD/keywords.txt
deleted file mode 100644
index 419fe04..0000000
--- a/libraries/SD/keywords.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-#######################################
-# Syntax Coloring Map SD
-#######################################
-
-#######################################
-# Datatypes (KEYWORD1)
-#######################################
-
-SD	KEYWORD1
-File	KEYWORD1
-
-#######################################
-# Methods and Functions (KEYWORD2)
-#######################################
-begin	KEYWORD2
-exists	KEYWORD2
-mkdir	KEYWORD2
-remove	KEYWORD2
-rmdir	KEYWORD2
-open	KEYWORD2
-close	KEYWORD2
-seek	KEYWORD2
-position	KEYWORD2
-size	KEYWORD2	
-
-#######################################
-# Constants (LITERAL1)
-#######################################
-FILE_READ	LITERAL1
-FILE_WRITE	LITERAL1
diff --git a/libraries/SD/utility/FatStructs.h b/libraries/SD/utility/FatStructs.h
deleted file mode 100644
index f5bdaa5..0000000
--- a/libraries/SD/utility/FatStructs.h
+++ /dev/null
@@ -1,418 +0,0 @@
-/* Arduino SdFat Library

- * Copyright (C) 2009 by William Greiman

- *

- * This file is part of the Arduino SdFat Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino SdFat Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#ifndef FatStructs_h

-#define FatStructs_h

-/**

- * \file

- * FAT file structures

- */

-/*

- * mostly from Microsoft document fatgen103.doc

- * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx

- */

-//------------------------------------------------------------------------------

-/** Value for byte 510 of boot block or MBR */

-uint8_t const BOOTSIG0 = 0X55;

-/** Value for byte 511 of boot block or MBR */

-uint8_t const BOOTSIG1 = 0XAA;

-//------------------------------------------------------------------------------

-/**

- * \struct partitionTable

- * \brief MBR partition table entry

- *

- * A partition table entry for a MBR formatted storage device.

- * The MBR partition table has four entries.

- */

-struct partitionTable {

-          /**

-           * Boot Indicator . Indicates whether the volume is the active

-           * partition.  Legal values include: 0X00. Do not use for booting.

-           * 0X80 Active partition.

-           */

-  uint8_t  boot;

-          /**

-            * Head part of Cylinder-head-sector address of the first block in

-            * the partition. Legal values are 0-255. Only used in old PC BIOS.

-            */

-  uint8_t  beginHead;

-          /**

-           * Sector part of Cylinder-head-sector address of the first block in

-           * the partition. Legal values are 1-63. Only used in old PC BIOS.

-           */

-  unsigned beginSector : 6;

-           /** High bits cylinder for first block in partition. */

-  unsigned beginCylinderHigh : 2;

-          /**

-           * Combine beginCylinderLow with beginCylinderHigh. Legal values

-           * are 0-1023.  Only used in old PC BIOS.

-           */

-  uint8_t  beginCylinderLow;

-          /**

-           * Partition type. See defines that begin with PART_TYPE_ for

-           * some Microsoft partition types.

-           */

-  uint8_t  type;

-          /**

-           * head part of cylinder-head-sector address of the last sector in the

-           * partition.  Legal values are 0-255. Only used in old PC BIOS.

-           */

-  uint8_t  endHead;

-          /**

-           * Sector part of cylinder-head-sector address of the last sector in

-           * the partition.  Legal values are 1-63. Only used in old PC BIOS.

-           */

-  unsigned endSector : 6;

-           /** High bits of end cylinder */

-  unsigned endCylinderHigh : 2;

-          /**

-           * Combine endCylinderLow with endCylinderHigh. Legal values

-           * are 0-1023.  Only used in old PC BIOS.

-           */

-  uint8_t  endCylinderLow;

-           /** Logical block address of the first block in the partition. */

-  uint32_t firstSector;

-           /** Length of the partition, in blocks. */

-  uint32_t totalSectors;

-};

-/** Type name for partitionTable */

-typedef struct partitionTable part_t;

-//------------------------------------------------------------------------------

-/**

- * \struct masterBootRecord

- *

- * \brief Master Boot Record

- *

- * The first block of a storage device that is formatted with a MBR.

- */

-struct masterBootRecord {

-           /** Code Area for master boot program. */

-  uint8_t  codeArea[440];

-           /** Optional WindowsNT disk signature. May contain more boot code. */

-  uint32_t diskSignature;

-           /** Usually zero but may be more boot code. */

-  uint16_t usuallyZero;

-           /** Partition tables. */

-  part_t   part[4];

-           /** First MBR signature byte. Must be 0X55 */

-  uint8_t  mbrSig0;

-           /** Second MBR signature byte. Must be 0XAA */

-  uint8_t  mbrSig1;

-};

-/** Type name for masterBootRecord */

-typedef struct masterBootRecord mbr_t;

-//------------------------------------------------------------------------------

-/** 

- * \struct biosParmBlock

- *

- * \brief BIOS parameter block

- * 

- *  The BIOS parameter block describes the physical layout of a FAT volume.

- */

-struct biosParmBlock {

-          /**

-           * Count of bytes per sector. This value may take on only the

-           * following values: 512, 1024, 2048 or 4096

-           */

-  uint16_t bytesPerSector;

-          /**

-           * Number of sectors per allocation unit. This value must be a

-           * power of 2 that is greater than 0. The legal values are

-           * 1, 2, 4, 8, 16, 32, 64, and 128.

-           */

-  uint8_t  sectorsPerCluster;

-          /**

-           * Number of sectors before the first FAT.

-           * This value must not be zero.

-           */

-  uint16_t reservedSectorCount;

-          /** The count of FAT data structures on the volume. This field should

-           *  always contain the value 2 for any FAT volume of any type.

-           */

-  uint8_t  fatCount;

-          /**

-          * For FAT12 and FAT16 volumes, this field contains the count of

-          * 32-byte directory entries in the root directory. For FAT32 volumes,

-          * this field must be set to 0. For FAT12 and FAT16 volumes, this

-          * value should always specify a count that when multiplied by 32

-          * results in a multiple of bytesPerSector.  FAT16 volumes should

-          * use the value 512.

-          */

-  uint16_t rootDirEntryCount;

-          /**

-           * This field is the old 16-bit total count of sectors on the volume.

-           * This count includes the count of all sectors in all four regions

-           * of the volume. This field can be 0; if it is 0, then totalSectors32

-           * must be non-zero.  For FAT32 volumes, this field must be 0. For

-           * FAT12 and FAT16 volumes, this field contains the sector count, and

-           * totalSectors32 is 0 if the total sector count fits

-           * (is less than 0x10000).

-           */

-  uint16_t totalSectors16;

-          /**

-           * This dates back to the old MS-DOS 1.x media determination and is

-           * no longer usually used for anything.  0xF8 is the standard value

-           * for fixed (non-removable) media. For removable media, 0xF0 is

-           * frequently used. Legal values are 0xF0 or 0xF8-0xFF.

-           */

-  uint8_t  mediaType;

-          /**

-           * Count of sectors occupied by one FAT on FAT12/FAT16 volumes.

-           * On FAT32 volumes this field must be 0, and sectorsPerFat32

-           * contains the FAT size count.

-           */

-  uint16_t sectorsPerFat16;

-           /** Sectors per track for interrupt 0x13. Not used otherwise. */

-  uint16_t sectorsPerTrtack;

-           /** Number of heads for interrupt 0x13.  Not used otherwise. */

-  uint16_t headCount;

-          /**

-           * Count of hidden sectors preceding the partition that contains this

-           * FAT volume. This field is generally only relevant for media

-           *  visible on interrupt 0x13.

-           */

-  uint32_t hidddenSectors;

-          /**

-           * This field is the new 32-bit total count of sectors on the volume.

-           * This count includes the count of all sectors in all four regions

-           * of the volume.  This field can be 0; if it is 0, then

-           * totalSectors16 must be non-zero.

-           */

-  uint32_t totalSectors32;

-          /**

-           * Count of sectors occupied by one FAT on FAT32 volumes.

-           */

-  uint32_t sectorsPerFat32;

-          /**

-           * This field is only defined for FAT32 media and does not exist on

-           * FAT12 and FAT16 media.

-           * Bits 0-3 -- Zero-based number of active FAT.

-           *             Only valid if mirroring is disabled.

-           * Bits 4-6 -- Reserved.

-           * Bit 7	-- 0 means the FAT is mirrored at runtime into all FATs.

-	         *        -- 1 means only one FAT is active; it is the one referenced in bits 0-3.

-           * Bits 8-15 	-- Reserved.

-           */

-  uint16_t fat32Flags;

-          /**

-           * FAT32 version. High byte is major revision number.

-           * Low byte is minor revision number. Only 0.0 define.

-           */

-  uint16_t fat32Version;

-          /**

-           * Cluster number of the first cluster of the root directory for FAT32.

-           * This usually 2 but not required to be 2.

-           */

-  uint32_t fat32RootCluster;

-          /**

-           * Sector number of FSINFO structure in the reserved area of the

-           * FAT32 volume. Usually 1.

-           */

-  uint16_t fat32FSInfo;

-          /**

-           * If non-zero, indicates the sector number in the reserved area

-           * of the volume of a copy of the boot record. Usually 6.

-           * No value other than 6 is recommended.

-           */

-  uint16_t fat32BackBootBlock;

-          /**

-           * Reserved for future expansion. Code that formats FAT32 volumes

-           * should always set all of the bytes of this field to 0.

-           */

-  uint8_t  fat32Reserved[12];

-};

-/** Type name for biosParmBlock */

-typedef struct biosParmBlock bpb_t;

-//------------------------------------------------------------------------------

-/**

- * \struct fat32BootSector

- *

- * \brief Boot sector for a FAT16 or FAT32 volume.

- * 

- */  

-struct fat32BootSector {

-           /** X86 jmp to boot program */

-  uint8_t  jmpToBootCode[3];

-           /** informational only - don't depend on it */

-  char     oemName[8];

-           /** BIOS Parameter Block */

-  bpb_t    bpb;

-           /** for int0x13 use value 0X80 for hard drive */

-  uint8_t  driveNumber;

-           /** used by Windows NT - should be zero for FAT */

-  uint8_t  reserved1;

-           /** 0X29 if next three fields are valid */

-  uint8_t  bootSignature;

-           /** usually generated by combining date and time */

-  uint32_t volumeSerialNumber;

-           /** should match volume label in root dir */

-  char     volumeLabel[11];

-           /** informational only - don't depend on it */

-  char     fileSystemType[8];

-           /** X86 boot code */

-  uint8_t  bootCode[420];

-           /** must be 0X55 */

-  uint8_t  bootSectorSig0;

-           /** must be 0XAA */

-  uint8_t  bootSectorSig1;

-};

-//------------------------------------------------------------------------------

-// End Of Chain values for FAT entries

-/** FAT16 end of chain value used by Microsoft. */

-uint16_t const FAT16EOC = 0XFFFF;

-/** Minimum value for FAT16 EOC.  Use to test for EOC. */

-uint16_t const FAT16EOC_MIN = 0XFFF8;

-/** FAT32 end of chain value used by Microsoft. */

-uint32_t const FAT32EOC = 0X0FFFFFFF;

-/** Minimum value for FAT32 EOC.  Use to test for EOC. */

-uint32_t const FAT32EOC_MIN = 0X0FFFFFF8;

-/** Mask a for FAT32 entry. Entries are 28 bits. */

-uint32_t const FAT32MASK = 0X0FFFFFFF;

-

-/** Type name for fat32BootSector */

-typedef struct fat32BootSector fbs_t;

-//------------------------------------------------------------------------------

-/**

- * \struct directoryEntry

- * \brief FAT short directory entry

- *

- * Short means short 8.3 name, not the entry size.

- *  

- * Date Format. A FAT directory entry date stamp is a 16-bit field that is 

- * basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the

- * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the 

- * 16-bit word):

- *   

- * Bits 9-15: Count of years from 1980, valid value range 0-127 

- * inclusive (1980-2107).

- *   

- * Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.

- *

- * Bits 0-4: Day of month, valid value range 1-31 inclusive.

- *

- * Time Format. A FAT directory entry time stamp is a 16-bit field that has

- * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the 

- * 16-bit word, bit 15 is the MSB of the 16-bit word).

- *   

- * Bits 11-15: Hours, valid value range 0-23 inclusive.

- * 

- * Bits 5-10: Minutes, valid value range 0-59 inclusive.

- *      

- * Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).

- *   

- * The valid time range is from Midnight 00:00:00 to 23:59:58.

- */

-struct directoryEntry {

-           /**

-            * Short 8.3 name.

-            * The first eight bytes contain the file name with blank fill.

-            * The last three bytes contain the file extension with blank fill.

-            */

-  uint8_t  name[11];

-          /** Entry attributes.

-           *

-           * The upper two bits of the attribute byte are reserved and should

-           * always be set to 0 when a file is created and never modified or

-           * looked at after that.  See defines that begin with DIR_ATT_.

-           */

-  uint8_t  attributes;

-          /**

-           * Reserved for use by Windows NT. Set value to 0 when a file is

-           * created and never modify or look at it after that.

-           */

-  uint8_t  reservedNT;

-          /**

-           * The granularity of the seconds part of creationTime is 2 seconds

-           * so this field is a count of tenths of a second and its valid

-           * value range is 0-199 inclusive. (WHG note - seems to be hundredths)

-           */

-  uint8_t  creationTimeTenths;

-           /** Time file was created. */

-  uint16_t creationTime;

-           /** Date file was created. */

-  uint16_t creationDate;

-          /**

-           * Last access date. Note that there is no last access time, only

-           * a date.  This is the date of last read or write. In the case of

-           * a write, this should be set to the same date as lastWriteDate.

-           */

-  uint16_t lastAccessDate;

-          /**

-           * High word of this entry's first cluster number (always 0 for a

-           * FAT12 or FAT16 volume).

-           */

-  uint16_t firstClusterHigh;

-           /** Time of last write. File creation is considered a write. */

-  uint16_t lastWriteTime;

-           /** Date of last write. File creation is considered a write. */

-  uint16_t lastWriteDate;

-           /** Low word of this entry's first cluster number. */

-  uint16_t firstClusterLow;

-           /** 32-bit unsigned holding this file's size in bytes. */

-  uint32_t fileSize;

-};

-//------------------------------------------------------------------------------

-// Definitions for directory entries

-//

-/** Type name for directoryEntry */

-typedef struct directoryEntry dir_t;

-/** escape for name[0] = 0XE5 */

-uint8_t const DIR_NAME_0XE5 = 0X05;

-/** name[0] value for entry that is free after being "deleted" */

-uint8_t const DIR_NAME_DELETED = 0XE5;

-/** name[0] value for entry that is free and no allocated entries follow */

-uint8_t const DIR_NAME_FREE = 0X00;

-/** file is read-only */

-uint8_t const DIR_ATT_READ_ONLY = 0X01;

-/** File should hidden in directory listings */

-uint8_t const DIR_ATT_HIDDEN = 0X02;

-/** Entry is for a system file */

-uint8_t const DIR_ATT_SYSTEM = 0X04;

-/** Directory entry contains the volume label */

-uint8_t const DIR_ATT_VOLUME_ID = 0X08;

-/** Entry is for a directory */

-uint8_t const DIR_ATT_DIRECTORY = 0X10;

-/** Old DOS archive bit for backup support */

-uint8_t const DIR_ATT_ARCHIVE = 0X20;

-/** Test value for long name entry.  Test is

-  (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */

-uint8_t const DIR_ATT_LONG_NAME = 0X0F;

-/** Test mask for long name entry */

-uint8_t const DIR_ATT_LONG_NAME_MASK = 0X3F;

-/** defined attribute bits */

-uint8_t const DIR_ATT_DEFINED_BITS = 0X3F;

-/** Directory entry is part of a long name */

-static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {

-  return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;

-}

-/** Mask for file/subdirectory tests */

-uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);

-/** Directory entry is for a file */

-static inline uint8_t DIR_IS_FILE(const dir_t* dir) {

-  return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;

-}

-/** Directory entry is for a subdirectory */

-static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {

-  return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;

-}

-/** Directory entry is for a file or subdirectory */

-static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {

-  return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;

-}

-#endif  // FatStructs_h

diff --git a/libraries/SD/utility/Sd2Card.cpp b/libraries/SD/utility/Sd2Card.cpp
deleted file mode 100644
index 361cd0a..0000000
--- a/libraries/SD/utility/Sd2Card.cpp
+++ /dev/null
@@ -1,644 +0,0 @@
-/* Arduino Sd2Card Library

- * Copyright (C) 2009 by William Greiman

- *

- * This file is part of the Arduino Sd2Card Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino Sd2Card Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#include <Arduino.h>

-#include "Sd2Card.h"

-//------------------------------------------------------------------------------

-#ifndef SOFTWARE_SPI

-// functions for hardware SPI

-/** Send a byte to the card */

-static void spiSend(uint8_t b) {

-  SPDR = b;

-  while (!(SPSR & (1 << SPIF)));

-}

-/** Receive a byte from the card */

-static  uint8_t spiRec(void) {

-  spiSend(0XFF);

-  return SPDR;

-}

-#else  // SOFTWARE_SPI

-//------------------------------------------------------------------------------

-/** nop to tune soft SPI timing */

-#define nop asm volatile ("nop\n\t")

-//------------------------------------------------------------------------------

-/** Soft SPI receive */

-uint8_t spiRec(void) {

-  uint8_t data = 0;

-  // no interrupts during byte receive - about 8 us

-  cli();

-  // output pin high - like sending 0XFF

-  fastDigitalWrite(SPI_MOSI_PIN, HIGH);

-

-  for (uint8_t i = 0; i < 8; i++) {

-    fastDigitalWrite(SPI_SCK_PIN, HIGH);

-

-    // adjust so SCK is nice

-    nop;

-    nop;

-

-    data <<= 1;

-

-    if (fastDigitalRead(SPI_MISO_PIN)) data |= 1;

-

-    fastDigitalWrite(SPI_SCK_PIN, LOW);

-  }

-  // enable interrupts

-  sei();

-  return data;

-}

-//------------------------------------------------------------------------------

-/** Soft SPI send */

-void spiSend(uint8_t data) {

-  // no interrupts during byte send - about 8 us

-  cli();

-  for (uint8_t i = 0; i < 8; i++) {

-    fastDigitalWrite(SPI_SCK_PIN, LOW);

-

-    fastDigitalWrite(SPI_MOSI_PIN, data & 0X80);

-

-    data <<= 1;

-

-    fastDigitalWrite(SPI_SCK_PIN, HIGH);

-  }

-  // hold SCK high for a few ns

-  nop;

-  nop;

-  nop;

-  nop;

-

-  fastDigitalWrite(SPI_SCK_PIN, LOW);

-  // enable interrupts

-  sei();

-}

-#endif  // SOFTWARE_SPI

-//------------------------------------------------------------------------------

-// send command and return error code.  Return zero for OK

-uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) {

-  // end read if in partialBlockRead mode

-  readEnd();

-

-  // select card

-  chipSelectLow();

-

-  // wait up to 300 ms if busy

-  waitNotBusy(300);

-

-  // send command

-  spiSend(cmd | 0x40);

-

-  // send argument

-  for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s);

-

-  // send CRC

-  uint8_t crc = 0XFF;

-  if (cmd == CMD0) crc = 0X95;  // correct crc for CMD0 with arg 0

-  if (cmd == CMD8) crc = 0X87;  // correct crc for CMD8 with arg 0X1AA

-  spiSend(crc);

-

-  // wait for response

-  for (uint8_t i = 0; ((status_ = spiRec()) & 0X80) && i != 0XFF; i++);

-  return status_;

-}

-//------------------------------------------------------------------------------

-/**

- * Determine the size of an SD flash memory card.

- *

- * \return The number of 512 byte data blocks in the card

- *         or zero if an error occurs.

- */

-uint32_t Sd2Card::cardSize(void) {

-  csd_t csd;

-  if (!readCSD(&csd)) return 0;

-  if (csd.v1.csd_ver == 0) {

-    uint8_t read_bl_len = csd.v1.read_bl_len;

-    uint16_t c_size = (csd.v1.c_size_high << 10)

-                      | (csd.v1.c_size_mid << 2) | csd.v1.c_size_low;

-    uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1)

-                          | csd.v1.c_size_mult_low;

-    return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7);

-  } else if (csd.v2.csd_ver == 1) {

-    uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16)

-                      | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low;

-    return (c_size + 1) << 10;

-  } else {

-    error(SD_CARD_ERROR_BAD_CSD);

-    return 0;

-  }

-}

-//------------------------------------------------------------------------------

-void Sd2Card::chipSelectHigh(void) {

-  digitalWrite(chipSelectPin_, HIGH);

-}

-//------------------------------------------------------------------------------

-void Sd2Card::chipSelectLow(void) {

-  digitalWrite(chipSelectPin_, LOW);

-}

-//------------------------------------------------------------------------------

-/** Erase a range of blocks.

- *

- * \param[in] firstBlock The address of the first block in the range.

- * \param[in] lastBlock The address of the last block in the range.

- *

- * \note This function requests the SD card to do a flash erase for a

- * range of blocks.  The data on the card after an erase operation is

- * either 0 or 1, depends on the card vendor.  The card must support

- * single block erase.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {

-  if (!eraseSingleBlockEnable()) {

-    error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK);

-    goto fail;

-  }

-  if (type_ != SD_CARD_TYPE_SDHC) {

-    firstBlock <<= 9;

-    lastBlock <<= 9;

-  }

-  if (cardCommand(CMD32, firstBlock)

-    || cardCommand(CMD33, lastBlock)

-    || cardCommand(CMD38, 0)) {

-      error(SD_CARD_ERROR_ERASE);

-      goto fail;

-  }

-  if (!waitNotBusy(SD_ERASE_TIMEOUT)) {

-    error(SD_CARD_ERROR_ERASE_TIMEOUT);

-    goto fail;

-  }

-  chipSelectHigh();

-  return true;

-

- fail:

-  chipSelectHigh();

-  return false;

-}

-//------------------------------------------------------------------------------

-/** Determine if card supports single block erase.

- *

- * \return The value one, true, is returned if single block erase is supported.

- * The value zero, false, is returned if single block erase is not supported.

- */

-uint8_t Sd2Card::eraseSingleBlockEnable(void) {

-  csd_t csd;

-  return readCSD(&csd) ? csd.v1.erase_blk_en : 0;

-}

-//------------------------------------------------------------------------------

-/**

- * Initialize an SD flash memory card.

- *

- * \param[in] sckRateID SPI clock rate selector. See setSckRate().

- * \param[in] chipSelectPin SD chip select pin number.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.  The reason for failure

- * can be determined by calling errorCode() and errorData().

- */

-uint8_t Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {

-  errorCode_ = inBlock_ = partialBlockRead_ = type_ = 0;

-  chipSelectPin_ = chipSelectPin;

-  // 16-bit init start time allows over a minute

-  uint16_t t0 = (uint16_t)millis();

-  uint32_t arg;

-

-  // set pin modes

-  pinMode(chipSelectPin_, OUTPUT);

-  chipSelectHigh();

-  pinMode(SPI_MISO_PIN, INPUT);

-  pinMode(SPI_MOSI_PIN, OUTPUT);

-  pinMode(SPI_SCK_PIN, OUTPUT);

-

-#ifndef SOFTWARE_SPI

-  // SS must be in output mode even it is not chip select

-  pinMode(SS_PIN, OUTPUT);

-  digitalWrite(SS_PIN, HIGH); // disable any SPI device using hardware SS pin

-  // Enable SPI, Master, clock rate f_osc/128

-  SPCR = (1 << SPE) | (1 << MSTR) | (1 << SPR1) | (1 << SPR0);

-  // clear double speed

-  SPSR &= ~(1 << SPI2X);

-#endif  // SOFTWARE_SPI

-

-  // must supply min of 74 clock cycles with CS high.

-  for (uint8_t i = 0; i < 10; i++) spiSend(0XFF);

-

-  chipSelectLow();

-

-  // command to go idle in SPI mode

-  while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) {

-    if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) {

-      error(SD_CARD_ERROR_CMD0);

-      goto fail;

-    }

-  }

-  // check SD version

-  if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) {

-    type(SD_CARD_TYPE_SD1);

-  } else {

-    // only need last byte of r7 response

-    for (uint8_t i = 0; i < 4; i++) status_ = spiRec();

-    if (status_ != 0XAA) {

-      error(SD_CARD_ERROR_CMD8);

-      goto fail;

-    }

-    type(SD_CARD_TYPE_SD2);

-  }

-  // initialize card and send host supports SDHC if SD2

-  arg = type() == SD_CARD_TYPE_SD2 ? 0X40000000 : 0;

-

-  while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) {

-    // check for timeout

-    if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) {

-      error(SD_CARD_ERROR_ACMD41);

-      goto fail;

-    }

-  }

-  // if SD2 read OCR register to check for SDHC card

-  if (type() == SD_CARD_TYPE_SD2) {

-    if (cardCommand(CMD58, 0)) {

-      error(SD_CARD_ERROR_CMD58);

-      goto fail;

-    }

-    if ((spiRec() & 0XC0) == 0XC0) type(SD_CARD_TYPE_SDHC);

-    // discard rest of ocr - contains allowed voltage range

-    for (uint8_t i = 0; i < 3; i++) spiRec();

-  }

-  chipSelectHigh();

-

-#ifndef SOFTWARE_SPI

-  return setSckRate(sckRateID);

-#else  // SOFTWARE_SPI

-  return true;

-#endif  // SOFTWARE_SPI

-

- fail:

-  chipSelectHigh();

-  return false;

-}

-//------------------------------------------------------------------------------

-/**

- * Enable or disable partial block reads.

- *

- * Enabling partial block reads improves performance by allowing a block

- * to be read over the SPI bus as several sub-blocks.  Errors may occur

- * if the time between reads is too long since the SD card may timeout.

- * The SPI SS line will be held low until the entire block is read or

- * readEnd() is called.

- *

- * Use this for applications like the Adafruit Wave Shield.

- *

- * \param[in] value The value TRUE (non-zero) or FALSE (zero).)

- */

-void Sd2Card::partialBlockRead(uint8_t value) {

-  readEnd();

-  partialBlockRead_ = value;

-}

-//------------------------------------------------------------------------------

-/**

- * Read a 512 byte block from an SD card device.

- *

- * \param[in] block Logical block to be read.

- * \param[out] dst Pointer to the location that will receive the data.

-

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t Sd2Card::readBlock(uint32_t block, uint8_t* dst) {

-  return readData(block, 0, 512, dst);

-}

-//------------------------------------------------------------------------------

-/**

- * Read part of a 512 byte block from an SD card.

- *

- * \param[in] block Logical block to be read.

- * \param[in] offset Number of bytes to skip at start of block

- * \param[out] dst Pointer to the location that will receive the data.

- * \param[in] count Number of bytes to read

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t Sd2Card::readData(uint32_t block,

-        uint16_t offset, uint16_t count, uint8_t* dst) {

-  uint16_t n;

-  if (count == 0) return true;

-  if ((count + offset) > 512) {

-    goto fail;

-  }

-  if (!inBlock_ || block != block_ || offset < offset_) {

-    block_ = block;

-    // use address if not SDHC card

-    if (type()!= SD_CARD_TYPE_SDHC) block <<= 9;

-    if (cardCommand(CMD17, block)) {

-      error(SD_CARD_ERROR_CMD17);

-      goto fail;

-    }

-    if (!waitStartBlock()) {

-      goto fail;

-    }

-    offset_ = 0;

-    inBlock_ = 1;

-  }

-

-#ifdef OPTIMIZE_HARDWARE_SPI

-  // start first spi transfer

-  SPDR = 0XFF;

-

-  // skip data before offset

-  for (;offset_ < offset; offset_++) {

-    while (!(SPSR & (1 << SPIF)));

-    SPDR = 0XFF;

-  }

-  // transfer data

-  n = count - 1;

-  for (uint16_t i = 0; i < n; i++) {

-    while (!(SPSR & (1 << SPIF)));

-    dst[i] = SPDR;

-    SPDR = 0XFF;

-  }

-  // wait for last byte

-  while (!(SPSR & (1 << SPIF)));

-  dst[n] = SPDR;

-

-#else  // OPTIMIZE_HARDWARE_SPI

-

-  // skip data before offset

-  for (;offset_ < offset; offset_++) {

-    spiRec();

-  }

-  // transfer data

-  for (uint16_t i = 0; i < count; i++) {

-    dst[i] = spiRec();

-  }

-#endif  // OPTIMIZE_HARDWARE_SPI

-

-  offset_ += count;

-  if (!partialBlockRead_ || offset_ >= 512) {

-    // read rest of data, checksum and set chip select high

-    readEnd();

-  }

-  return true;

-

- fail:

-  chipSelectHigh();

-  return false;

-}

-//------------------------------------------------------------------------------

-/** Skip remaining data in a block when in partial block read mode. */

-void Sd2Card::readEnd(void) {

-  if (inBlock_) {

-      // skip data and crc

-#ifdef OPTIMIZE_HARDWARE_SPI

-    // optimize skip for hardware

-    SPDR = 0XFF;

-    while (offset_++ < 513) {

-      while (!(SPSR & (1 << SPIF)));

-      SPDR = 0XFF;

-    }

-    // wait for last crc byte

-    while (!(SPSR & (1 << SPIF)));

-#else  // OPTIMIZE_HARDWARE_SPI

-    while (offset_++ < 514) spiRec();

-#endif  // OPTIMIZE_HARDWARE_SPI

-    chipSelectHigh();

-    inBlock_ = 0;

-  }

-}

-//------------------------------------------------------------------------------

-/** read CID or CSR register */

-uint8_t Sd2Card::readRegister(uint8_t cmd, void* buf) {

-  uint8_t* dst = reinterpret_cast<uint8_t*>(buf);

-  if (cardCommand(cmd, 0)) {

-    error(SD_CARD_ERROR_READ_REG);

-    goto fail;

-  }

-  if (!waitStartBlock()) goto fail;

-  // transfer data

-  for (uint16_t i = 0; i < 16; i++) dst[i] = spiRec();

-  spiRec();  // get first crc byte

-  spiRec();  // get second crc byte

-  chipSelectHigh();

-  return true;

-

- fail:

-  chipSelectHigh();

-  return false;

-}

-//------------------------------------------------------------------------------

-/**

- * Set the SPI clock rate.

- *

- * \param[in] sckRateID A value in the range [0, 6].

- *

- * The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum

- * SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128

- * for \a scsRateID = 6.

- *

- * \return The value one, true, is returned for success and the value zero,

- * false, is returned for an invalid value of \a sckRateID.

- */

-uint8_t Sd2Card::setSckRate(uint8_t sckRateID) {

-  if (sckRateID > 6) {

-    error(SD_CARD_ERROR_SCK_RATE);

-    return false;

-  }

-  // see avr processor datasheet for SPI register bit definitions

-  if ((sckRateID & 1) || sckRateID == 6) {

-    SPSR &= ~(1 << SPI2X);

-  } else {

-    SPSR |= (1 << SPI2X);

-  }

-  SPCR &= ~((1 <<SPR1) | (1 << SPR0));

-  SPCR |= (sckRateID & 4 ? (1 << SPR1) : 0)

-    | (sckRateID & 2 ? (1 << SPR0) : 0);

-  return true;

-}

-//------------------------------------------------------------------------------

-// wait for card to go not busy

-uint8_t Sd2Card::waitNotBusy(uint16_t timeoutMillis) {

-  uint16_t t0 = millis();

-  do {

-    if (spiRec() == 0XFF) return true;

-  }

-  while (((uint16_t)millis() - t0) < timeoutMillis);

-  return false;

-}

-//------------------------------------------------------------------------------

-/** Wait for start block token */

-uint8_t Sd2Card::waitStartBlock(void) {

-  uint16_t t0 = millis();

-  while ((status_ = spiRec()) == 0XFF) {

-    if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) {

-      error(SD_CARD_ERROR_READ_TIMEOUT);

-      goto fail;

-    }

-  }

-  if (status_ != DATA_START_BLOCK) {

-    error(SD_CARD_ERROR_READ);

-    goto fail;

-  }

-  return true;

-

- fail:

-  chipSelectHigh();

-  return false;

-}

-//------------------------------------------------------------------------------

-/**

- * Writes a 512 byte block to an SD card.

- *

- * \param[in] blockNumber Logical block to be written.

- * \param[in] src Pointer to the location of the data to be written.

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {

-#if SD_PROTECT_BLOCK_ZERO

-  // don't allow write to first block

-  if (blockNumber == 0) {

-    error(SD_CARD_ERROR_WRITE_BLOCK_ZERO);

-    goto fail;

-  }

-#endif  // SD_PROTECT_BLOCK_ZERO

-

-  // use address if not SDHC card

-  if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;

-  if (cardCommand(CMD24, blockNumber)) {

-    error(SD_CARD_ERROR_CMD24);

-    goto fail;

-  }

-  if (!writeData(DATA_START_BLOCK, src)) goto fail;

-

-  // wait for flash programming to complete

-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) {

-    error(SD_CARD_ERROR_WRITE_TIMEOUT);

-    goto fail;

-  }

-  // response is r2 so get and check two bytes for nonzero

-  if (cardCommand(CMD13, 0) || spiRec()) {

-    error(SD_CARD_ERROR_WRITE_PROGRAMMING);

-    goto fail;

-  }

-  chipSelectHigh();

-  return true;

-

- fail:

-  chipSelectHigh();

-  return false;

-}

-//------------------------------------------------------------------------------

-/** Write one data block in a multiple block write sequence */

-uint8_t Sd2Card::writeData(const uint8_t* src) {

-  // wait for previous write to finish

-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) {

-    error(SD_CARD_ERROR_WRITE_MULTIPLE);

-    chipSelectHigh();

-    return false;

-  }

-  return writeData(WRITE_MULTIPLE_TOKEN, src);

-}

-//------------------------------------------------------------------------------

-// send one block of data for write block or write multiple blocks

-uint8_t Sd2Card::writeData(uint8_t token, const uint8_t* src) {

-#ifdef OPTIMIZE_HARDWARE_SPI

-

-  // send data - optimized loop

-  SPDR = token;

-

-  // send two byte per iteration

-  for (uint16_t i = 0; i < 512; i += 2) {

-    while (!(SPSR & (1 << SPIF)));

-    SPDR = src[i];

-    while (!(SPSR & (1 << SPIF)));

-    SPDR = src[i+1];

-  }

-

-  // wait for last data byte

-  while (!(SPSR & (1 << SPIF)));

-

-#else  // OPTIMIZE_HARDWARE_SPI

-  spiSend(token);

-  for (uint16_t i = 0; i < 512; i++) {

-    spiSend(src[i]);

-  }

-#endif  // OPTIMIZE_HARDWARE_SPI

-  spiSend(0xff);  // dummy crc

-  spiSend(0xff);  // dummy crc

-

-  status_ = spiRec();

-  if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) {

-    error(SD_CARD_ERROR_WRITE);

-    chipSelectHigh();

-    return false;

-  }

-  return true;

-}

-//------------------------------------------------------------------------------

-/** Start a write multiple blocks sequence.

- *

- * \param[in] blockNumber Address of first block in sequence.

- * \param[in] eraseCount The number of blocks to be pre-erased.

- *

- * \note This function is used with writeData() and writeStop()

- * for optimized multiple block writes.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) {

-#if SD_PROTECT_BLOCK_ZERO

-  // don't allow write to first block

-  if (blockNumber == 0) {

-    error(SD_CARD_ERROR_WRITE_BLOCK_ZERO);

-    goto fail;

-  }

-#endif  // SD_PROTECT_BLOCK_ZERO

-  // send pre-erase count

-  if (cardAcmd(ACMD23, eraseCount)) {

-    error(SD_CARD_ERROR_ACMD23);

-    goto fail;

-  }

-  // use address if not SDHC card

-  if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;

-  if (cardCommand(CMD25, blockNumber)) {

-    error(SD_CARD_ERROR_CMD25);

-    goto fail;

-  }

-  return true;

-

- fail:

-  chipSelectHigh();

-  return false;

-}

-//------------------------------------------------------------------------------

-/** End a write multiple blocks sequence.

- *

-* \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t Sd2Card::writeStop(void) {

-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail;

-  spiSend(STOP_TRAN_TOKEN);

-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail;

-  chipSelectHigh();

-  return true;

-

- fail:

-  error(SD_CARD_ERROR_STOP_TRAN);

-  chipSelectHigh();

-  return false;

-}

diff --git a/libraries/SD/utility/Sd2Card.h b/libraries/SD/utility/Sd2Card.h
deleted file mode 100644
index 73b46fb..0000000
--- a/libraries/SD/utility/Sd2Card.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/* Arduino Sd2Card Library

- * Copyright (C) 2009 by William Greiman

- *

- * This file is part of the Arduino Sd2Card Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino Sd2Card Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#ifndef Sd2Card_h

-#define Sd2Card_h

-/**

- * \file

- * Sd2Card class

- */

-#include "Sd2PinMap.h"

-#include "SdInfo.h"

-/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */

-uint8_t const SPI_FULL_SPEED = 0;

-/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */

-uint8_t const SPI_HALF_SPEED = 1;

-/** Set SCK rate to F_CPU/8. Sd2Card::setSckRate(). */

-uint8_t const SPI_QUARTER_SPEED = 2;

-/**

- * Define MEGA_SOFT_SPI non-zero to use software SPI on Mega Arduinos.

- * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.

- *

- * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used

- * on Mega Arduinos.  Software SPI works well with GPS Shield V1.1

- * but many SD cards will fail with GPS Shield V1.0.

- */

-#define MEGA_SOFT_SPI 0

-//------------------------------------------------------------------------------

-#if MEGA_SOFT_SPI && (defined(__AVR_ATmega1280__)||defined(__AVR_ATmega2560__))

-#define SOFTWARE_SPI

-#endif  // MEGA_SOFT_SPI

-//------------------------------------------------------------------------------

-// SPI pin definitions

-//

-#ifndef SOFTWARE_SPI

-// hardware pin defs

-/**

- * SD Chip Select pin

- *

- * Warning if this pin is redefined the hardware SS will pin will be enabled

- * as an output by init().  An avr processor will not function as an SPI

- * master unless SS is set to output mode.

- */

-/** The default chip select pin for the SD card is SS. */

-uint8_t const  SD_CHIP_SELECT_PIN = SS_PIN;

-// The following three pins must not be redefined for hardware SPI.

-/** SPI Master Out Slave In pin */

-uint8_t const  SPI_MOSI_PIN = MOSI_PIN;

-/** SPI Master In Slave Out pin */

-uint8_t const  SPI_MISO_PIN = MISO_PIN;

-/** SPI Clock pin */

-uint8_t const  SPI_SCK_PIN = SCK_PIN;

-/** optimize loops for hardware SPI */

-#define OPTIMIZE_HARDWARE_SPI

-

-#else  // SOFTWARE_SPI

-// define software SPI pins so Mega can use unmodified GPS Shield

-/** SPI chip select pin */

-uint8_t const SD_CHIP_SELECT_PIN = 10;

-/** SPI Master Out Slave In pin */

-uint8_t const SPI_MOSI_PIN = 11;

-/** SPI Master In Slave Out pin */

-uint8_t const SPI_MISO_PIN = 12;

-/** SPI Clock pin */

-uint8_t const SPI_SCK_PIN = 13;

-#endif  // SOFTWARE_SPI

-//------------------------------------------------------------------------------

-/** Protect block zero from write if nonzero */

-#define SD_PROTECT_BLOCK_ZERO 1

-/** init timeout ms */

-uint16_t const SD_INIT_TIMEOUT = 2000;

-/** erase timeout ms */

-uint16_t const SD_ERASE_TIMEOUT = 10000;

-/** read timeout ms */

-uint16_t const SD_READ_TIMEOUT = 300;

-/** write time out ms */

-uint16_t const SD_WRITE_TIMEOUT = 600;

-//------------------------------------------------------------------------------

-// SD card errors

-/** timeout error for command CMD0 */

-uint8_t const SD_CARD_ERROR_CMD0 = 0X1;

-/** CMD8 was not accepted - not a valid SD card*/

-uint8_t const SD_CARD_ERROR_CMD8 = 0X2;

-/** card returned an error response for CMD17 (read block) */

-uint8_t const SD_CARD_ERROR_CMD17 = 0X3;

-/** card returned an error response for CMD24 (write block) */

-uint8_t const SD_CARD_ERROR_CMD24 = 0X4;

-/**  WRITE_MULTIPLE_BLOCKS command failed */

-uint8_t const SD_CARD_ERROR_CMD25 = 0X05;

-/** card returned an error response for CMD58 (read OCR) */

-uint8_t const SD_CARD_ERROR_CMD58 = 0X06;

-/** SET_WR_BLK_ERASE_COUNT failed */

-uint8_t const SD_CARD_ERROR_ACMD23 = 0X07;

-/** card's ACMD41 initialization process timeout */

-uint8_t const SD_CARD_ERROR_ACMD41 = 0X08;

-/** card returned a bad CSR version field */

-uint8_t const SD_CARD_ERROR_BAD_CSD = 0X09;

-/** erase block group command failed */

-uint8_t const SD_CARD_ERROR_ERASE = 0X0A;

-/** card not capable of single block erase */

-uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0X0B;

-/** Erase sequence timed out */

-uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0X0C;

-/** card returned an error token instead of read data */

-uint8_t const SD_CARD_ERROR_READ = 0X0D;

-/** read CID or CSD failed */

-uint8_t const SD_CARD_ERROR_READ_REG = 0X0E;

-/** timeout while waiting for start of read data */

-uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0X0F;

-/** card did not accept STOP_TRAN_TOKEN */

-uint8_t const SD_CARD_ERROR_STOP_TRAN = 0X10;

-/** card returned an error token as a response to a write operation */

-uint8_t const SD_CARD_ERROR_WRITE = 0X11;

-/** attempt to write protected block zero */

-uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0X12;

-/** card did not go ready for a multiple block write */

-uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0X13;

-/** card returned an error to a CMD13 status check after a write */

-uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0X14;

-/** timeout occurred during write programming */

-uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0X15;

-/** incorrect rate selected */

-uint8_t const SD_CARD_ERROR_SCK_RATE = 0X16;

-//------------------------------------------------------------------------------

-// card types

-/** Standard capacity V1 SD card */

-uint8_t const SD_CARD_TYPE_SD1 = 1;

-/** Standard capacity V2 SD card */

-uint8_t const SD_CARD_TYPE_SD2 = 2;

-/** High Capacity SD card */

-uint8_t const SD_CARD_TYPE_SDHC = 3;

-//------------------------------------------------------------------------------

-/**

- * \class Sd2Card

- * \brief Raw access to SD and SDHC flash memory cards.

- */

-class Sd2Card {

- public:

-  /** Construct an instance of Sd2Card. */

-  Sd2Card(void) : errorCode_(0), inBlock_(0), partialBlockRead_(0), type_(0) {}

-  uint32_t cardSize(void);

-  uint8_t erase(uint32_t firstBlock, uint32_t lastBlock);

-  uint8_t eraseSingleBlockEnable(void);

-  /**

-   * \return error code for last error. See Sd2Card.h for a list of error codes.

-   */

-  uint8_t errorCode(void) const {return errorCode_;}

-  /** \return error data for last error. */

-  uint8_t errorData(void) const {return status_;}

-  /**

-   * Initialize an SD flash memory card with default clock rate and chip

-   * select pin.  See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).

-   */

-  uint8_t init(void) {

-    return init(SPI_FULL_SPEED, SD_CHIP_SELECT_PIN);

-  }

-  /**

-   * Initialize an SD flash memory card with the selected SPI clock rate

-   * and the default SD chip select pin.

-   * See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).

-   */

-  uint8_t init(uint8_t sckRateID) {

-    return init(sckRateID, SD_CHIP_SELECT_PIN);

-  }

-  uint8_t init(uint8_t sckRateID, uint8_t chipSelectPin);

-  void partialBlockRead(uint8_t value);

-  /** Returns the current value, true or false, for partial block read. */

-  uint8_t partialBlockRead(void) const {return partialBlockRead_;}

-  uint8_t readBlock(uint32_t block, uint8_t* dst);

-  uint8_t readData(uint32_t block,

-          uint16_t offset, uint16_t count, uint8_t* dst);

-  /**

-   * Read a cards CID register. The CID contains card identification

-   * information such as Manufacturer ID, Product name, Product serial

-   * number and Manufacturing date. */

-  uint8_t readCID(cid_t* cid) {

-    return readRegister(CMD10, cid);

-  }

-  /**

-   * Read a cards CSD register. The CSD contains Card-Specific Data that

-   * provides information regarding access to the card's contents. */

-  uint8_t readCSD(csd_t* csd) {

-    return readRegister(CMD9, csd);

-  }

-  void readEnd(void);

-  uint8_t setSckRate(uint8_t sckRateID);

-  /** Return the card type: SD V1, SD V2 or SDHC */

-  uint8_t type(void) const {return type_;}

-  uint8_t writeBlock(uint32_t blockNumber, const uint8_t* src);

-  uint8_t writeData(const uint8_t* src);

-  uint8_t writeStart(uint32_t blockNumber, uint32_t eraseCount);

-  uint8_t writeStop(void);

- private:

-  uint32_t block_;

-  uint8_t chipSelectPin_;

-  uint8_t errorCode_;

-  uint8_t inBlock_;

-  uint16_t offset_;

-  uint8_t partialBlockRead_;

-  uint8_t status_;

-  uint8_t type_;

-  // private functions

-  uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {

-    cardCommand(CMD55, 0);

-    return cardCommand(cmd, arg);

-  }

-  uint8_t cardCommand(uint8_t cmd, uint32_t arg);

-  void error(uint8_t code) {errorCode_ = code;}

-  uint8_t readRegister(uint8_t cmd, void* buf);

-  uint8_t sendWriteCommand(uint32_t blockNumber, uint32_t eraseCount);

-  void chipSelectHigh(void);

-  void chipSelectLow(void);

-  void type(uint8_t value) {type_ = value;}

-  uint8_t waitNotBusy(uint16_t timeoutMillis);

-  uint8_t writeData(uint8_t token, const uint8_t* src);

-  uint8_t waitStartBlock(void);

-};

-#endif  // Sd2Card_h

diff --git a/libraries/SD/utility/Sd2PinMap.h b/libraries/SD/utility/Sd2PinMap.h
deleted file mode 100644
index 1c76dd3..0000000
--- a/libraries/SD/utility/Sd2PinMap.h
+++ /dev/null
@@ -1,352 +0,0 @@
-/* Arduino SdFat Library

- * Copyright (C) 2010 by William Greiman

- *

- * This file is part of the Arduino SdFat Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino SdFat Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-// Warning this file was generated by a program.

-#ifndef Sd2PinMap_h

-#define Sd2PinMap_h

-#include <avr/io.h>

-

-//------------------------------------------------------------------------------

-/** struct for mapping digital pins */

-struct pin_map_t {

-  volatile uint8_t* ddr;

-  volatile uint8_t* pin;

-  volatile uint8_t* port;

-  uint8_t bit;

-};

-//------------------------------------------------------------------------------

-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)

-// Mega

-

-// Two Wire (aka I2C) ports

-uint8_t const SDA_PIN = 20;

-uint8_t const SCL_PIN = 21;

-

-// SPI port

-uint8_t const SS_PIN = 53;

-uint8_t const MOSI_PIN = 51;

-uint8_t const MISO_PIN = 50;

-uint8_t const SCK_PIN = 52;

-

-static const pin_map_t digitalPinMap[] = {

-  {&DDRE, &PINE, &PORTE, 0},  // E0  0

-  {&DDRE, &PINE, &PORTE, 1},  // E1  1

-  {&DDRE, &PINE, &PORTE, 4},  // E4  2

-  {&DDRE, &PINE, &PORTE, 5},  // E5  3

-  {&DDRG, &PING, &PORTG, 5},  // G5  4

-  {&DDRE, &PINE, &PORTE, 3},  // E3  5

-  {&DDRH, &PINH, &PORTH, 3},  // H3  6

-  {&DDRH, &PINH, &PORTH, 4},  // H4  7

-  {&DDRH, &PINH, &PORTH, 5},  // H5  8

-  {&DDRH, &PINH, &PORTH, 6},  // H6  9

-  {&DDRB, &PINB, &PORTB, 4},  // B4 10

-  {&DDRB, &PINB, &PORTB, 5},  // B5 11

-  {&DDRB, &PINB, &PORTB, 6},  // B6 12

-  {&DDRB, &PINB, &PORTB, 7},  // B7 13

-  {&DDRJ, &PINJ, &PORTJ, 1},  // J1 14

-  {&DDRJ, &PINJ, &PORTJ, 0},  // J0 15

-  {&DDRH, &PINH, &PORTH, 1},  // H1 16

-  {&DDRH, &PINH, &PORTH, 0},  // H0 17

-  {&DDRD, &PIND, &PORTD, 3},  // D3 18

-  {&DDRD, &PIND, &PORTD, 2},  // D2 19

-  {&DDRD, &PIND, &PORTD, 1},  // D1 20

-  {&DDRD, &PIND, &PORTD, 0},  // D0 21

-  {&DDRA, &PINA, &PORTA, 0},  // A0 22

-  {&DDRA, &PINA, &PORTA, 1},  // A1 23

-  {&DDRA, &PINA, &PORTA, 2},  // A2 24

-  {&DDRA, &PINA, &PORTA, 3},  // A3 25

-  {&DDRA, &PINA, &PORTA, 4},  // A4 26

-  {&DDRA, &PINA, &PORTA, 5},  // A5 27

-  {&DDRA, &PINA, &PORTA, 6},  // A6 28

-  {&DDRA, &PINA, &PORTA, 7},  // A7 29

-  {&DDRC, &PINC, &PORTC, 7},  // C7 30

-  {&DDRC, &PINC, &PORTC, 6},  // C6 31

-  {&DDRC, &PINC, &PORTC, 5},  // C5 32

-  {&DDRC, &PINC, &PORTC, 4},  // C4 33

-  {&DDRC, &PINC, &PORTC, 3},  // C3 34

-  {&DDRC, &PINC, &PORTC, 2},  // C2 35

-  {&DDRC, &PINC, &PORTC, 1},  // C1 36

-  {&DDRC, &PINC, &PORTC, 0},  // C0 37

-  {&DDRD, &PIND, &PORTD, 7},  // D7 38

-  {&DDRG, &PING, &PORTG, 2},  // G2 39

-  {&DDRG, &PING, &PORTG, 1},  // G1 40

-  {&DDRG, &PING, &PORTG, 0},  // G0 41

-  {&DDRL, &PINL, &PORTL, 7},  // L7 42

-  {&DDRL, &PINL, &PORTL, 6},  // L6 43

-  {&DDRL, &PINL, &PORTL, 5},  // L5 44

-  {&DDRL, &PINL, &PORTL, 4},  // L4 45

-  {&DDRL, &PINL, &PORTL, 3},  // L3 46

-  {&DDRL, &PINL, &PORTL, 2},  // L2 47

-  {&DDRL, &PINL, &PORTL, 1},  // L1 48

-  {&DDRL, &PINL, &PORTL, 0},  // L0 49

-  {&DDRB, &PINB, &PORTB, 3},  // B3 50

-  {&DDRB, &PINB, &PORTB, 2},  // B2 51

-  {&DDRB, &PINB, &PORTB, 1},  // B1 52

-  {&DDRB, &PINB, &PORTB, 0},  // B0 53

-  {&DDRF, &PINF, &PORTF, 0},  // F0 54

-  {&DDRF, &PINF, &PORTF, 1},  // F1 55

-  {&DDRF, &PINF, &PORTF, 2},  // F2 56

-  {&DDRF, &PINF, &PORTF, 3},  // F3 57

-  {&DDRF, &PINF, &PORTF, 4},  // F4 58

-  {&DDRF, &PINF, &PORTF, 5},  // F5 59

-  {&DDRF, &PINF, &PORTF, 6},  // F6 60

-  {&DDRF, &PINF, &PORTF, 7},  // F7 61

-  {&DDRK, &PINK, &PORTK, 0},  // K0 62

-  {&DDRK, &PINK, &PORTK, 1},  // K1 63

-  {&DDRK, &PINK, &PORTK, 2},  // K2 64

-  {&DDRK, &PINK, &PORTK, 3},  // K3 65

-  {&DDRK, &PINK, &PORTK, 4},  // K4 66

-  {&DDRK, &PINK, &PORTK, 5},  // K5 67

-  {&DDRK, &PINK, &PORTK, 6},  // K6 68

-  {&DDRK, &PINK, &PORTK, 7}   // K7 69

-};

-//------------------------------------------------------------------------------

-#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)

-// Sanguino

-

-// Two Wire (aka I2C) ports

-uint8_t const SDA_PIN = 17;

-uint8_t const SCL_PIN = 18;

-

-// SPI port

-uint8_t const SS_PIN = 4;

-uint8_t const MOSI_PIN = 5;

-uint8_t const MISO_PIN = 6;

-uint8_t const SCK_PIN = 7;

-

-static const pin_map_t digitalPinMap[] = {

-  {&DDRB, &PINB, &PORTB, 0},  // B0  0

-  {&DDRB, &PINB, &PORTB, 1},  // B1  1

-  {&DDRB, &PINB, &PORTB, 2},  // B2  2

-  {&DDRB, &PINB, &PORTB, 3},  // B3  3

-  {&DDRB, &PINB, &PORTB, 4},  // B4  4

-  {&DDRB, &PINB, &PORTB, 5},  // B5  5

-  {&DDRB, &PINB, &PORTB, 6},  // B6  6

-  {&DDRB, &PINB, &PORTB, 7},  // B7  7

-  {&DDRD, &PIND, &PORTD, 0},  // D0  8

-  {&DDRD, &PIND, &PORTD, 1},  // D1  9

-  {&DDRD, &PIND, &PORTD, 2},  // D2 10

-  {&DDRD, &PIND, &PORTD, 3},  // D3 11

-  {&DDRD, &PIND, &PORTD, 4},  // D4 12

-  {&DDRD, &PIND, &PORTD, 5},  // D5 13

-  {&DDRD, &PIND, &PORTD, 6},  // D6 14

-  {&DDRD, &PIND, &PORTD, 7},  // D7 15

-  {&DDRC, &PINC, &PORTC, 0},  // C0 16

-  {&DDRC, &PINC, &PORTC, 1},  // C1 17

-  {&DDRC, &PINC, &PORTC, 2},  // C2 18

-  {&DDRC, &PINC, &PORTC, 3},  // C3 19

-  {&DDRC, &PINC, &PORTC, 4},  // C4 20

-  {&DDRC, &PINC, &PORTC, 5},  // C5 21

-  {&DDRC, &PINC, &PORTC, 6},  // C6 22

-  {&DDRC, &PINC, &PORTC, 7},  // C7 23

-  {&DDRA, &PINA, &PORTA, 7},  // A7 24

-  {&DDRA, &PINA, &PORTA, 6},  // A6 25

-  {&DDRA, &PINA, &PORTA, 5},  // A5 26

-  {&DDRA, &PINA, &PORTA, 4},  // A4 27

-  {&DDRA, &PINA, &PORTA, 3},  // A3 28

-  {&DDRA, &PINA, &PORTA, 2},  // A2 29

-  {&DDRA, &PINA, &PORTA, 1},  // A1 30

-  {&DDRA, &PINA, &PORTA, 0}   // A0 31

-};

-//------------------------------------------------------------------------------

-#elif defined(__AVR_ATmega32U4__)

-// Leonardo

-

-// Two Wire (aka I2C) ports

-uint8_t const SDA_PIN = 2;

-uint8_t const SCL_PIN = 3;

-

-// SPI port

-uint8_t const SS_PIN = 17;

-uint8_t const MOSI_PIN = 16;

-uint8_t const MISO_PIN = 14;

-uint8_t const SCK_PIN = 15;

-

-static const pin_map_t digitalPinMap[] = {

-  {&DDRD, &PIND, &PORTD, 2},  // D2  0

-  {&DDRD, &PIND, &PORTD, 3},  // D3  1

-  {&DDRD, &PIND, &PORTD, 1},  // D1  2

-  {&DDRD, &PIND, &PORTD, 0},  // D0  3

-  {&DDRD, &PIND, &PORTD, 4},  // D4  4

-  {&DDRC, &PINC, &PORTC, 6},  // C6  5

-  {&DDRD, &PIND, &PORTD, 7},  // D7  6

-  {&DDRE, &PINE, &PORTE, 6},  // E6  7

-  {&DDRB, &PINB, &PORTB, 4},  // B4  8

-  {&DDRB, &PINB, &PORTB, 5},  // B5  9

-  {&DDRB, &PINB, &PORTB, 6},  // B6 10

-  {&DDRB, &PINB, &PORTB, 7},  // B7 11

-  {&DDRD, &PIND, &PORTD, 6},  // D6 12

-  {&DDRC, &PINC, &PORTC, 7},  // C7 13

-  {&DDRB, &PINB, &PORTB, 3},  // B3 14

-  {&DDRB, &PINB, &PORTB, 1},  // B1 15

-  {&DDRB, &PINB, &PORTB, 2},  // B2 16

-  {&DDRB, &PINB, &PORTB, 0},  // B0 17

-  {&DDRF, &PINF, &PORTF, 7},  // F7 18

-  {&DDRF, &PINF, &PORTF, 6},  // F6 19

-  {&DDRF, &PINF, &PORTF, 5},  // F5 20

-  {&DDRF, &PINF, &PORTF, 4},  // F4 21

-  {&DDRF, &PINF, &PORTF, 1},  // F1 22

-  {&DDRF, &PINF, &PORTF, 0},  // F0 23

-};

-//------------------------------------------------------------------------------

-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)

-// Teensy++ 1.0 & 2.0

-

-// Two Wire (aka I2C) ports

-uint8_t const SDA_PIN = 1;

-uint8_t const SCL_PIN = 0;

-

-// SPI port

-uint8_t const SS_PIN = 20;

-uint8_t const MOSI_PIN = 22;

-uint8_t const MISO_PIN = 23;

-uint8_t const SCK_PIN = 21;

-

-static const pin_map_t digitalPinMap[] = {

-  {&DDRD, &PIND, &PORTD, 0},  // D0  0

-  {&DDRD, &PIND, &PORTD, 1},  // D1  1

-  {&DDRD, &PIND, &PORTD, 2},  // D2  2

-  {&DDRD, &PIND, &PORTD, 3},  // D3  3

-  {&DDRD, &PIND, &PORTD, 4},  // D4  4

-  {&DDRD, &PIND, &PORTD, 5},  // D5  5

-  {&DDRD, &PIND, &PORTD, 6},  // D6  6

-  {&DDRD, &PIND, &PORTD, 7},  // D7  7

-  {&DDRE, &PINE, &PORTE, 0},  // E0  8

-  {&DDRE, &PINE, &PORTE, 1},  // E1  9

-  {&DDRC, &PINC, &PORTC, 0},  // C0 10

-  {&DDRC, &PINC, &PORTC, 1},  // C1 11

-  {&DDRC, &PINC, &PORTC, 2},  // C2 12

-  {&DDRC, &PINC, &PORTC, 3},  // C3 13

-  {&DDRC, &PINC, &PORTC, 4},  // C4 14

-  {&DDRC, &PINC, &PORTC, 5},  // C5 15

-  {&DDRC, &PINC, &PORTC, 6},  // C6 16

-  {&DDRC, &PINC, &PORTC, 7},  // C7 17

-  {&DDRE, &PINE, &PORTE, 6},  // E6 18

-  {&DDRE, &PINE, &PORTE, 7},  // E7 19

-  {&DDRB, &PINB, &PORTB, 0},  // B0 20

-  {&DDRB, &PINB, &PORTB, 1},  // B1 21

-  {&DDRB, &PINB, &PORTB, 2},  // B2 22

-  {&DDRB, &PINB, &PORTB, 3},  // B3 23

-  {&DDRB, &PINB, &PORTB, 4},  // B4 24

-  {&DDRB, &PINB, &PORTB, 5},  // B5 25

-  {&DDRB, &PINB, &PORTB, 6},  // B6 26

-  {&DDRB, &PINB, &PORTB, 7},  // B7 27

-  {&DDRA, &PINA, &PORTA, 0},  // A0 28

-  {&DDRA, &PINA, &PORTA, 1},  // A1 29

-  {&DDRA, &PINA, &PORTA, 2},  // A2 30

-  {&DDRA, &PINA, &PORTA, 3},  // A3 31

-  {&DDRA, &PINA, &PORTA, 4},  // A4 32

-  {&DDRA, &PINA, &PORTA, 5},  // A5 33

-  {&DDRA, &PINA, &PORTA, 6},  // A6 34

-  {&DDRA, &PINA, &PORTA, 7},  // A7 35

-  {&DDRE, &PINE, &PORTE, 4},  // E4 36

-  {&DDRE, &PINE, &PORTE, 5},  // E5 37

-  {&DDRF, &PINF, &PORTF, 0},  // F0 38

-  {&DDRF, &PINF, &PORTF, 1},  // F1 39

-  {&DDRF, &PINF, &PORTF, 2},  // F2 40

-  {&DDRF, &PINF, &PORTF, 3},  // F3 41

-  {&DDRF, &PINF, &PORTF, 4},  // F4 42

-  {&DDRF, &PINF, &PORTF, 5},  // F5 43

-  {&DDRF, &PINF, &PORTF, 6},  // F6 44

-  {&DDRF, &PINF, &PORTF, 7}   // F7 45

-};

-//------------------------------------------------------------------------------

-#else  // defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)

-// 168 and 328 Arduinos

-

-// Two Wire (aka I2C) ports

-uint8_t const SDA_PIN = 18;

-uint8_t const SCL_PIN = 19;

-

-// SPI port

-uint8_t const SS_PIN = 10;

-uint8_t const MOSI_PIN = 11;

-uint8_t const MISO_PIN = 12;

-uint8_t const SCK_PIN = 13;

-

-static const pin_map_t digitalPinMap[] = {

-  {&DDRD, &PIND, &PORTD, 0},  // D0  0

-  {&DDRD, &PIND, &PORTD, 1},  // D1  1

-  {&DDRD, &PIND, &PORTD, 2},  // D2  2

-  {&DDRD, &PIND, &PORTD, 3},  // D3  3

-  {&DDRD, &PIND, &PORTD, 4},  // D4  4

-  {&DDRD, &PIND, &PORTD, 5},  // D5  5

-  {&DDRD, &PIND, &PORTD, 6},  // D6  6

-  {&DDRD, &PIND, &PORTD, 7},  // D7  7

-  {&DDRB, &PINB, &PORTB, 0},  // B0  8

-  {&DDRB, &PINB, &PORTB, 1},  // B1  9

-  {&DDRB, &PINB, &PORTB, 2},  // B2 10

-  {&DDRB, &PINB, &PORTB, 3},  // B3 11

-  {&DDRB, &PINB, &PORTB, 4},  // B4 12

-  {&DDRB, &PINB, &PORTB, 5},  // B5 13

-  {&DDRC, &PINC, &PORTC, 0},  // C0 14

-  {&DDRC, &PINC, &PORTC, 1},  // C1 15

-  {&DDRC, &PINC, &PORTC, 2},  // C2 16

-  {&DDRC, &PINC, &PORTC, 3},  // C3 17

-  {&DDRC, &PINC, &PORTC, 4},  // C4 18

-  {&DDRC, &PINC, &PORTC, 5}   // C5 19

-};

-#endif  // defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)

-//------------------------------------------------------------------------------

-static const uint8_t digitalPinCount = sizeof(digitalPinMap)/sizeof(pin_map_t);

-

-uint8_t badPinNumber(void)

-  __attribute__((error("Pin number is too large or not a constant")));

-

-static inline __attribute__((always_inline))

-  uint8_t getPinMode(uint8_t pin) {

-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {

-    return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1;

-  } else {

-    return badPinNumber();

-  }

-}

-static inline __attribute__((always_inline))

-  void setPinMode(uint8_t pin, uint8_t mode) {

-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {

-    if (mode) {

-      *digitalPinMap[pin].ddr |= 1 << digitalPinMap[pin].bit;

-    } else {

-      *digitalPinMap[pin].ddr &= ~(1 << digitalPinMap[pin].bit);

-    }

-  } else {

-    badPinNumber();

-  }

-}

-static inline __attribute__((always_inline))

-  uint8_t fastDigitalRead(uint8_t pin) {

-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {

-    return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1;

-  } else {

-    return badPinNumber();

-  }

-}

-static inline __attribute__((always_inline))

-  void fastDigitalWrite(uint8_t pin, uint8_t value) {

-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {

-    if (value) {

-      *digitalPinMap[pin].port |= 1 << digitalPinMap[pin].bit;

-    } else {

-      *digitalPinMap[pin].port &= ~(1 << digitalPinMap[pin].bit);

-    }

-  } else {

-    badPinNumber();

-  }

-}

-#endif  // Sd2PinMap_h

diff --git a/libraries/SD/utility/SdFat.h b/libraries/SD/utility/SdFat.h
deleted file mode 100644
index 344326f..0000000
--- a/libraries/SD/utility/SdFat.h
+++ /dev/null
@@ -1,547 +0,0 @@
-/* Arduino SdFat Library

- * Copyright (C) 2009 by William Greiman

- *

- * This file is part of the Arduino SdFat Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino SdFat Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#ifndef SdFat_h

-#define SdFat_h

-/**

- * \file

- * SdFile and SdVolume classes

- */

-#include <avr/pgmspace.h>

-#include "Sd2Card.h"

-#include "FatStructs.h"

-#include "Print.h"

-//------------------------------------------------------------------------------

-/**

- * Allow use of deprecated functions if non-zero

- */

-#define ALLOW_DEPRECATED_FUNCTIONS 1

-//------------------------------------------------------------------------------

-// forward declaration since SdVolume is used in SdFile

-class SdVolume;

-//==============================================================================

-// SdFile class

-

-// flags for ls()

-/** ls() flag to print modify date */

-uint8_t const LS_DATE = 1;

-/** ls() flag to print file size */

-uint8_t const LS_SIZE = 2;

-/** ls() flag for recursive list of subdirectories */

-uint8_t const LS_R = 4;

-

-// use the gnu style oflag in open()

-/** open() oflag for reading */

-uint8_t const O_READ = 0X01;

-/** open() oflag - same as O_READ */

-uint8_t const O_RDONLY = O_READ;

-/** open() oflag for write */

-uint8_t const O_WRITE = 0X02;

-/** open() oflag - same as O_WRITE */

-uint8_t const O_WRONLY = O_WRITE;

-/** open() oflag for reading and writing */

-uint8_t const O_RDWR = (O_READ | O_WRITE);

-/** open() oflag mask for access modes */

-uint8_t const O_ACCMODE = (O_READ | O_WRITE);

-/** The file offset shall be set to the end of the file prior to each write. */

-uint8_t const O_APPEND = 0X04;

-/** synchronous writes - call sync() after each write */

-uint8_t const O_SYNC = 0X08;

-/** create the file if nonexistent */

-uint8_t const O_CREAT = 0X10;

-/** If O_CREAT and O_EXCL are set, open() shall fail if the file exists */

-uint8_t const O_EXCL = 0X20;

-/** truncate the file to zero length */

-uint8_t const O_TRUNC = 0X40;

-

-// flags for timestamp

-/** set the file's last access date */

-uint8_t const T_ACCESS = 1;

-/** set the file's creation date and time */

-uint8_t const T_CREATE = 2;

-/** Set the file's write date and time */

-uint8_t const T_WRITE = 4;

-// values for type_

-/** This SdFile has not been opened. */

-uint8_t const FAT_FILE_TYPE_CLOSED = 0;

-/** SdFile for a file */

-uint8_t const FAT_FILE_TYPE_NORMAL = 1;

-/** SdFile for a FAT16 root directory */

-uint8_t const FAT_FILE_TYPE_ROOT16 = 2;

-/** SdFile for a FAT32 root directory */

-uint8_t const FAT_FILE_TYPE_ROOT32 = 3;

-/** SdFile for a subdirectory */

-uint8_t const FAT_FILE_TYPE_SUBDIR = 4;

-/** Test value for directory type */

-uint8_t const FAT_FILE_TYPE_MIN_DIR = FAT_FILE_TYPE_ROOT16;

-

-/** date field for FAT directory entry */

-static inline uint16_t FAT_DATE(uint16_t year, uint8_t month, uint8_t day) {

-  return (year - 1980) << 9 | month << 5 | day;

-}

-/** year part of FAT directory date field */

-static inline uint16_t FAT_YEAR(uint16_t fatDate) {

-  return 1980 + (fatDate >> 9);

-}

-/** month part of FAT directory date field */

-static inline uint8_t FAT_MONTH(uint16_t fatDate) {

-  return (fatDate >> 5) & 0XF;

-}

-/** day part of FAT directory date field */

-static inline uint8_t FAT_DAY(uint16_t fatDate) {

-  return fatDate & 0X1F;

-}

-/** time field for FAT directory entry */

-static inline uint16_t FAT_TIME(uint8_t hour, uint8_t minute, uint8_t second) {

-  return hour << 11 | minute << 5 | second >> 1;

-}

-/** hour part of FAT directory time field */

-static inline uint8_t FAT_HOUR(uint16_t fatTime) {

-  return fatTime >> 11;

-}

-/** minute part of FAT directory time field */

-static inline uint8_t FAT_MINUTE(uint16_t fatTime) {

-  return(fatTime >> 5) & 0X3F;

-}

-/** second part of FAT directory time field */

-static inline uint8_t FAT_SECOND(uint16_t fatTime) {

-  return 2*(fatTime & 0X1F);

-}

-/** Default date for file timestamps is 1 Jan 2000 */

-uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1;

-/** Default time for file timestamp is 1 am */

-uint16_t const FAT_DEFAULT_TIME = (1 << 11);

-//------------------------------------------------------------------------------

-/**

- * \class SdFile

- * \brief Access FAT16 and FAT32 files on SD and SDHC cards.

- */

-class SdFile : public Print {

- public:

-  /** Create an instance of SdFile. */

-  SdFile(void) : type_(FAT_FILE_TYPE_CLOSED) {}

-  /**

-   * writeError is set to true if an error occurs during a write().

-   * Set writeError to false before calling print() and/or write() and check

-   * for true after calls to print() and/or write().

-   */

-  //bool writeError;

-  /**

-   * Cancel unbuffered reads for this file.

-   * See setUnbufferedRead()

-   */

-  void clearUnbufferedRead(void) {

-    flags_ &= ~F_FILE_UNBUFFERED_READ;

-  }

-  uint8_t close(void);

-  uint8_t contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);

-  uint8_t createContiguous(SdFile* dirFile,

-          const char* fileName, uint32_t size);

-  /** \return The current cluster number for a file or directory. */

-  uint32_t curCluster(void) const {return curCluster_;}

-  /** \return The current position for a file or directory. */

-  uint32_t curPosition(void) const {return curPosition_;}

-  /**

-   * Set the date/time callback function

-   *

-   * \param[in] dateTime The user's call back function.  The callback

-   * function is of the form:

-   *

-   * \code

-   * void dateTime(uint16_t* date, uint16_t* time) {

-   *   uint16_t year;

-   *   uint8_t month, day, hour, minute, second;

-   *

-   *   // User gets date and time from GPS or real-time clock here

-   *

-   *   // return date using FAT_DATE macro to format fields

-   *   *date = FAT_DATE(year, month, day);

-   *

-   *   // return time using FAT_TIME macro to format fields

-   *   *time = FAT_TIME(hour, minute, second);

-   * }

-   * \endcode

-   *

-   * Sets the function that is called when a file is created or when

-   * a file's directory entry is modified by sync(). All timestamps,

-   * access, creation, and modify, are set when a file is created.

-   * sync() maintains the last access date and last modify date/time.

-   *

-   * See the timestamp() function.

-   */

-  static void dateTimeCallback(

-    void (*dateTime)(uint16_t* date, uint16_t* time)) {

-    dateTime_ = dateTime;

-  }

-  /**

-   * Cancel the date/time callback function.

-   */

-  static void dateTimeCallbackCancel(void) {

-    // use explicit zero since NULL is not defined for Sanguino

-    dateTime_ = 0;

-  }

-  /** \return Address of the block that contains this file's directory. */

-  uint32_t dirBlock(void) const {return dirBlock_;}

-  uint8_t dirEntry(dir_t* dir);

-  /** \return Index of this file's directory in the block dirBlock. */

-  uint8_t dirIndex(void) const {return dirIndex_;}

-  static void dirName(const dir_t& dir, char* name);

-  /** \return The total number of bytes in a file or directory. */

-  uint32_t fileSize(void) const {return fileSize_;}

-  /** \return The first cluster number for a file or directory. */

-  uint32_t firstCluster(void) const {return firstCluster_;}

-  /** \return True if this is a SdFile for a directory else false. */

-  uint8_t isDir(void) const {return type_ >= FAT_FILE_TYPE_MIN_DIR;}

-  /** \return True if this is a SdFile for a file else false. */

-  uint8_t isFile(void) const {return type_ == FAT_FILE_TYPE_NORMAL;}

-  /** \return True if this is a SdFile for an open file/directory else false. */

-  uint8_t isOpen(void) const {return type_ != FAT_FILE_TYPE_CLOSED;}

-  /** \return True if this is a SdFile for a subdirectory else false. */

-  uint8_t isSubDir(void) const {return type_ == FAT_FILE_TYPE_SUBDIR;}

-  /** \return True if this is a SdFile for the root directory. */

-  uint8_t isRoot(void) const {

-    return type_ == FAT_FILE_TYPE_ROOT16 || type_ == FAT_FILE_TYPE_ROOT32;

-  }

-  void ls(uint8_t flags = 0, uint8_t indent = 0);

-  uint8_t makeDir(SdFile* dir, const char* dirName);

-  uint8_t open(SdFile* dirFile, uint16_t index, uint8_t oflag);

-  uint8_t open(SdFile* dirFile, const char* fileName, uint8_t oflag);

-

-  uint8_t openRoot(SdVolume* vol);

-  static void printDirName(const dir_t& dir, uint8_t width);

-  static void printFatDate(uint16_t fatDate);

-  static void printFatTime(uint16_t fatTime);

-  static void printTwoDigits(uint8_t v);

-  /**

-   * Read the next byte from a file.

-   *

-   * \return For success read returns the next byte in the file as an int.

-   * If an error occurs or end of file is reached -1 is returned.

-   */

-  int16_t read(void) {

-    uint8_t b;

-    return read(&b, 1) == 1 ? b : -1;

-  }

-  int16_t read(void* buf, uint16_t nbyte);

-  int8_t readDir(dir_t* dir);

-  static uint8_t remove(SdFile* dirFile, const char* fileName);

-  uint8_t remove(void);

-  /** Set the file's current position to zero. */

-  void rewind(void) {

-    curPosition_ = curCluster_ = 0;

-  }

-  uint8_t rmDir(void);

-  uint8_t rmRfStar(void);

-  /** Set the files position to current position + \a pos. See seekSet(). */

-  uint8_t seekCur(uint32_t pos) {

-    return seekSet(curPosition_ + pos);

-  }

-  /**

-   *  Set the files current position to end of file.  Useful to position

-   *  a file for append. See seekSet().

-   */

-  uint8_t seekEnd(void) {return seekSet(fileSize_);}

-  uint8_t seekSet(uint32_t pos);

-  /**

-   * Use unbuffered reads to access this file.  Used with Wave

-   * Shield ISR.  Used with Sd2Card::partialBlockRead() in WaveRP.

-   *

-   * Not recommended for normal applications.

-   */

-  void setUnbufferedRead(void) {

-    if (isFile()) flags_ |= F_FILE_UNBUFFERED_READ;

-  }

-  uint8_t timestamp(uint8_t flag, uint16_t year, uint8_t month, uint8_t day,

-          uint8_t hour, uint8_t minute, uint8_t second);

-  uint8_t sync(void);

-  /** Type of this SdFile.  You should use isFile() or isDir() instead of type()

-   * if possible.

-   *

-   * \return The file or directory type.

-   */

-  uint8_t type(void) const {return type_;}

-  uint8_t truncate(uint32_t size);

-  /** \return Unbuffered read flag. */

-  uint8_t unbufferedRead(void) const {

-    return flags_ & F_FILE_UNBUFFERED_READ;

-  }

-  /** \return SdVolume that contains this file. */

-  SdVolume* volume(void) const {return vol_;}

-  size_t write(uint8_t b);

-  size_t write(const void* buf, uint16_t nbyte);

-  size_t write(const char* str);

-  void write_P(PGM_P str);

-  void writeln_P(PGM_P str);

-//------------------------------------------------------------------------------

-#if ALLOW_DEPRECATED_FUNCTIONS

-// Deprecated functions  - suppress cpplint warnings with NOLINT comment

-  /** \deprecated Use:

-   * uint8_t SdFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);

-   */

-  uint8_t contiguousRange(uint32_t& bgnBlock, uint32_t& endBlock) {  // NOLINT

-    return contiguousRange(&bgnBlock, &endBlock);

-  }

- /** \deprecated Use:

-   * uint8_t SdFile::createContiguous(SdFile* dirFile,

-   *   const char* fileName, uint32_t size)

-   */

-  uint8_t createContiguous(SdFile& dirFile,  // NOLINT

-    const char* fileName, uint32_t size) {

-    return createContiguous(&dirFile, fileName, size);

-  }

-

-  /**

-   * \deprecated Use:

-   * static void SdFile::dateTimeCallback(

-   *   void (*dateTime)(uint16_t* date, uint16_t* time));

-   */

-  static void dateTimeCallback(

-    void (*dateTime)(uint16_t& date, uint16_t& time)) {  // NOLINT

-    oldDateTime_ = dateTime;

-    dateTime_ = dateTime ? oldToNew : 0;

-  }

-  /** \deprecated Use: uint8_t SdFile::dirEntry(dir_t* dir); */

-  uint8_t dirEntry(dir_t& dir) {return dirEntry(&dir);}  // NOLINT

-  /** \deprecated Use:

-   * uint8_t SdFile::makeDir(SdFile* dir, const char* dirName);

-   */

-  uint8_t makeDir(SdFile& dir, const char* dirName) {  // NOLINT

-    return makeDir(&dir, dirName);

-  }

-  /** \deprecated Use:

-   * uint8_t SdFile::open(SdFile* dirFile, const char* fileName, uint8_t oflag);

-   */

-  uint8_t open(SdFile& dirFile, // NOLINT

-    const char* fileName, uint8_t oflag) {

-    return open(&dirFile, fileName, oflag);

-  }

-  /** \deprecated  Do not use in new apps */

-  uint8_t open(SdFile& dirFile, const char* fileName) {  // NOLINT

-    return open(dirFile, fileName, O_RDWR);

-  }

-  /** \deprecated Use:

-   * uint8_t SdFile::open(SdFile* dirFile, uint16_t index, uint8_t oflag);

-   */

-  uint8_t open(SdFile& dirFile, uint16_t index, uint8_t oflag) {  // NOLINT

-    return open(&dirFile, index, oflag);

-  }

-  /** \deprecated Use: uint8_t SdFile::openRoot(SdVolume* vol); */

-  uint8_t openRoot(SdVolume& vol) {return openRoot(&vol);}  // NOLINT

-

-  /** \deprecated Use: int8_t SdFile::readDir(dir_t* dir); */

-  int8_t readDir(dir_t& dir) {return readDir(&dir);}  // NOLINT

-  /** \deprecated Use:

-   * static uint8_t SdFile::remove(SdFile* dirFile, const char* fileName);

-   */

-  static uint8_t remove(SdFile& dirFile, const char* fileName) {  // NOLINT

-    return remove(&dirFile, fileName);

-  }

-//------------------------------------------------------------------------------

-// rest are private

- private:

-  static void (*oldDateTime_)(uint16_t& date, uint16_t& time);  // NOLINT

-  static void oldToNew(uint16_t* date, uint16_t* time) {

-    uint16_t d;

-    uint16_t t;

-    oldDateTime_(d, t);

-    *date = d;

-    *time = t;

-  }

-#endif  // ALLOW_DEPRECATED_FUNCTIONS

- private:

-  // bits defined in flags_

-  // should be 0XF

-  static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC);

-  // available bits

-  static uint8_t const F_UNUSED = 0X30;

-  // use unbuffered SD read

-  static uint8_t const F_FILE_UNBUFFERED_READ = 0X40;

-  // sync of directory entry required

-  static uint8_t const F_FILE_DIR_DIRTY = 0X80;

-

-// make sure F_OFLAG is ok

-#if ((F_UNUSED | F_FILE_UNBUFFERED_READ | F_FILE_DIR_DIRTY) & F_OFLAG)

-#error flags_ bits conflict

-#endif  // flags_ bits

-

-  // private data

-  uint8_t   flags_;         // See above for definition of flags_ bits

-  uint8_t   type_;          // type of file see above for values

-  uint32_t  curCluster_;    // cluster for current file position

-  uint32_t  curPosition_;   // current file position in bytes from beginning

-  uint32_t  dirBlock_;      // SD block that contains directory entry for file

-  uint8_t   dirIndex_;      // index of entry in dirBlock 0 <= dirIndex_ <= 0XF

-  uint32_t  fileSize_;      // file size in bytes

-  uint32_t  firstCluster_;  // first cluster of file

-  SdVolume* vol_;           // volume where file is located

-

-  // private functions

-  uint8_t addCluster(void);

-  uint8_t addDirCluster(void);

-  dir_t* cacheDirEntry(uint8_t action);

-  static void (*dateTime_)(uint16_t* date, uint16_t* time);

-  static uint8_t make83Name(const char* str, uint8_t* name);

-  uint8_t openCachedEntry(uint8_t cacheIndex, uint8_t oflags);

-  dir_t* readDirCache(void);

-};

-//==============================================================================

-// SdVolume class

-/**

- * \brief Cache for an SD data block

- */

-union cache_t {

-           /** Used to access cached file data blocks. */

-  uint8_t  data[512];

-           /** Used to access cached FAT16 entries. */

-  uint16_t fat16[256];

-           /** Used to access cached FAT32 entries. */

-  uint32_t fat32[128];

-           /** Used to access cached directory entries. */

-  dir_t    dir[16];

-           /** Used to access a cached MasterBoot Record. */

-  mbr_t    mbr;

-           /** Used to access to a cached FAT boot sector. */

-  fbs_t    fbs;

-};

-//------------------------------------------------------------------------------

-/**

- * \class SdVolume

- * \brief Access FAT16 and FAT32 volumes on SD and SDHC cards.

- */

-class SdVolume {

- public:

-  /** Create an instance of SdVolume */

-  SdVolume(void) :allocSearchStart_(2), fatType_(0) {}

-  /** Clear the cache and returns a pointer to the cache.  Used by the WaveRP

-   *  recorder to do raw write to the SD card.  Not for normal apps.

-   */

-  static uint8_t* cacheClear(void) {

-    cacheFlush();

-    cacheBlockNumber_ = 0XFFFFFFFF;

-    return cacheBuffer_.data;

-  }

-  /**

-   * Initialize a FAT volume.  Try partition one first then try super

-   * floppy format.

-   *

-   * \param[in] dev The Sd2Card where the volume is located.

-   *

-   * \return The value one, true, is returned for success and

-   * the value zero, false, is returned for failure.  Reasons for

-   * failure include not finding a valid partition, not finding a valid

-   * FAT file system or an I/O error.

-   */

-  uint8_t init(Sd2Card* dev) { return init(dev, 1) ? true : init(dev, 0);}

-  uint8_t init(Sd2Card* dev, uint8_t part);

-

-  // inline functions that return volume info

-  /** \return The volume's cluster size in blocks. */

-  uint8_t blocksPerCluster(void) const {return blocksPerCluster_;}

-  /** \return The number of blocks in one FAT. */

-  uint32_t blocksPerFat(void)  const {return blocksPerFat_;}

-  /** \return The total number of clusters in the volume. */

-  uint32_t clusterCount(void) const {return clusterCount_;}

-  /** \return The shift count required to multiply by blocksPerCluster. */

-  uint8_t clusterSizeShift(void) const {return clusterSizeShift_;}

-  /** \return The logical block number for the start of file data. */

-  uint32_t dataStartBlock(void) const {return dataStartBlock_;}

-  /** \return The number of FAT structures on the volume. */

-  uint8_t fatCount(void) const {return fatCount_;}

-  /** \return The logical block number for the start of the first FAT. */

-  uint32_t fatStartBlock(void) const {return fatStartBlock_;}

-  /** \return The FAT type of the volume. Values are 12, 16 or 32. */

-  uint8_t fatType(void) const {return fatType_;}

-  /** \return The number of entries in the root directory for FAT16 volumes. */

-  uint32_t rootDirEntryCount(void) const {return rootDirEntryCount_;}

-  /** \return The logical block number for the start of the root directory

-       on FAT16 volumes or the first cluster number on FAT32 volumes. */

-  uint32_t rootDirStart(void) const {return rootDirStart_;}

-  /** return a pointer to the Sd2Card object for this volume */

-  static Sd2Card* sdCard(void) {return sdCard_;}

-//------------------------------------------------------------------------------

-#if ALLOW_DEPRECATED_FUNCTIONS

-  // Deprecated functions  - suppress cpplint warnings with NOLINT comment

-  /** \deprecated Use: uint8_t SdVolume::init(Sd2Card* dev); */

-  uint8_t init(Sd2Card& dev) {return init(&dev);}  // NOLINT

-

-  /** \deprecated Use: uint8_t SdVolume::init(Sd2Card* dev, uint8_t vol); */

-  uint8_t init(Sd2Card& dev, uint8_t part) {  // NOLINT

-    return init(&dev, part);

-  }

-#endif  // ALLOW_DEPRECATED_FUNCTIONS

-//------------------------------------------------------------------------------

-  private:

-  // Allow SdFile access to SdVolume private data.

-  friend class SdFile;

-

-  // value for action argument in cacheRawBlock to indicate read from cache

-  static uint8_t const CACHE_FOR_READ = 0;

-  // value for action argument in cacheRawBlock to indicate cache dirty

-  static uint8_t const CACHE_FOR_WRITE = 1;

-

-  static cache_t cacheBuffer_;        // 512 byte cache for device blocks

-  static uint32_t cacheBlockNumber_;  // Logical number of block in the cache

-  static Sd2Card* sdCard_;            // Sd2Card object for cache

-  static uint8_t cacheDirty_;         // cacheFlush() will write block if true

-  static uint32_t cacheMirrorBlock_;  // block number for mirror FAT

-//

-  uint32_t allocSearchStart_;   // start cluster for alloc search

-  uint8_t blocksPerCluster_;    // cluster size in blocks

-  uint32_t blocksPerFat_;       // FAT size in blocks

-  uint32_t clusterCount_;       // clusters in one FAT

-  uint8_t clusterSizeShift_;    // shift to convert cluster count to block count

-  uint32_t dataStartBlock_;     // first data block number

-  uint8_t fatCount_;            // number of FATs on volume

-  uint32_t fatStartBlock_;      // start block for first FAT

-  uint8_t fatType_;             // volume type (12, 16, OR 32)

-  uint16_t rootDirEntryCount_;  // number of entries in FAT16 root dir

-  uint32_t rootDirStart_;       // root start block for FAT16, cluster for FAT32

-  //----------------------------------------------------------------------------

-  uint8_t allocContiguous(uint32_t count, uint32_t* curCluster);

-  uint8_t blockOfCluster(uint32_t position) const {

-          return (position >> 9) & (blocksPerCluster_ - 1);}

-  uint32_t clusterStartBlock(uint32_t cluster) const {

-           return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_);}

-  uint32_t blockNumber(uint32_t cluster, uint32_t position) const {

-           return clusterStartBlock(cluster) + blockOfCluster(position);}

-  static uint8_t cacheFlush(void);

-  static uint8_t cacheRawBlock(uint32_t blockNumber, uint8_t action);

-  static void cacheSetDirty(void) {cacheDirty_ |= CACHE_FOR_WRITE;}

-  static uint8_t cacheZeroBlock(uint32_t blockNumber);

-  uint8_t chainSize(uint32_t beginCluster, uint32_t* size) const;

-  uint8_t fatGet(uint32_t cluster, uint32_t* value) const;

-  uint8_t fatPut(uint32_t cluster, uint32_t value);

-  uint8_t fatPutEOC(uint32_t cluster) {

-    return fatPut(cluster, 0x0FFFFFFF);

-  }

-  uint8_t freeChain(uint32_t cluster);

-  uint8_t isEOC(uint32_t cluster) const {

-    return  cluster >= (fatType_ == 16 ? FAT16EOC_MIN : FAT32EOC_MIN);

-  }

-  uint8_t readBlock(uint32_t block, uint8_t* dst) {

-    return sdCard_->readBlock(block, dst);}

-  uint8_t readData(uint32_t block, uint16_t offset,

-    uint16_t count, uint8_t* dst) {

-      return sdCard_->readData(block, offset, count, dst);

-  }

-  uint8_t writeBlock(uint32_t block, const uint8_t* dst) {

-    return sdCard_->writeBlock(block, dst);

-  }

-};

-#endif  // SdFat_h

diff --git a/libraries/SD/utility/SdFatUtil.h b/libraries/SD/utility/SdFatUtil.h
deleted file mode 100644
index 7d6b410..0000000
--- a/libraries/SD/utility/SdFatUtil.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* Arduino SdFat Library

- * Copyright (C) 2008 by William Greiman

- *

- * This file is part of the Arduino SdFat Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

-

- * You should have received a copy of the GNU General Public License

- * along with the Arduino SdFat Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#ifndef SdFatUtil_h

-#define SdFatUtil_h

-/**

- * \file

- * Useful utility functions.

- */

-#include <Arduino.h>

-#include <avr/pgmspace.h>

-/** Store and print a string in flash memory.*/

-#define PgmPrint(x) SerialPrint_P(PSTR(x))

-/** Store and print a string in flash memory followed by a CR/LF.*/

-#define PgmPrintln(x) SerialPrintln_P(PSTR(x))

-/** Defined so doxygen works for function definitions. */

-#define NOINLINE __attribute__((noinline,unused))

-#define UNUSEDOK __attribute__((unused))

-//------------------------------------------------------------------------------

-/** Return the number of bytes currently free in RAM. */

-static UNUSEDOK int FreeRam(void) {

-  extern int  __bss_end;

-  extern int* __brkval;

-  int free_memory;

-  if (reinterpret_cast<int>(__brkval) == 0) {

-    // if no heap use from end of bss section

-    free_memory = reinterpret_cast<int>(&free_memory)

-                  - reinterpret_cast<int>(&__bss_end);

-  } else {

-    // use from top of stack to heap

-    free_memory = reinterpret_cast<int>(&free_memory)

-                  - reinterpret_cast<int>(__brkval);

-  }

-  return free_memory;

-}

-//------------------------------------------------------------------------------

-/**

- * %Print a string in flash memory to the serial port.

- *

- * \param[in] str Pointer to string stored in flash memory.

- */

-static NOINLINE void SerialPrint_P(PGM_P str) {

-  for (uint8_t c; (c = pgm_read_byte(str)); str++) Serial.write(c);

-}

-//------------------------------------------------------------------------------

-/**

- * %Print a string in flash memory followed by a CR/LF.

- *

- * \param[in] str Pointer to string stored in flash memory.

- */

-static NOINLINE void SerialPrintln_P(PGM_P str) {

-  SerialPrint_P(str);

-  Serial.println();

-}

-#endif  // #define SdFatUtil_h

diff --git a/libraries/SD/utility/SdFatmainpage.h b/libraries/SD/utility/SdFatmainpage.h
deleted file mode 100644
index 73b3b63..0000000
--- a/libraries/SD/utility/SdFatmainpage.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* Arduino SdFat Library

- * Copyright (C) 2009 by William Greiman

- *  

- * This file is part of the Arduino SdFat Library

- *  

- * This Library is free software: you can redistribute it and/or modify 

- * it under the terms of the GNU General Public License as published by 

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- * 

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino SdFat Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-

-/**

-\mainpage Arduino SdFat Library

-<CENTER>Copyright &copy; 2009 by William Greiman

-</CENTER>

-

-\section Intro Introduction

-The Arduino SdFat Library is a minimal implementation of FAT16 and FAT32

-file systems on SD flash memory cards.  Standard SD and high capacity

-SDHC cards are supported.

-

-The SdFat only supports short 8.3 names.

-

-The main classes in SdFat are Sd2Card, SdVolume, and SdFile.

-

-The Sd2Card class supports access to standard SD cards and SDHC cards.  Most

-applications will only need to call the Sd2Card::init() member function.

-

-The SdVolume class supports FAT16 and FAT32 partitions.  Most applications

-will only need to call the SdVolume::init() member function.

-

-The SdFile class provides file access functions such as open(), read(),

-remove(), write(), close() and sync(). This class supports access to the root

-directory and subdirectories.

-

-A number of example are provided in the SdFat/examples folder.  These were

-developed to test SdFat and illustrate its use.

-

-SdFat was developed for high speed data recording.  SdFat was used to implement

-an audio record/play class, WaveRP, for the Adafruit Wave Shield.  This

-application uses special Sd2Card calls to write to contiguous files in raw mode.

-These functions reduce write latency so that audio can be recorded with the

-small amount of RAM in the Arduino.

-

-\section SDcard SD\SDHC Cards

-

-Arduinos access SD cards using the cards SPI protocol.  PCs, Macs, and

-most consumer devices use the 4-bit parallel SD protocol.  A card that

-functions well on A PC or Mac may not work well on the Arduino.

-

-Most cards have good SPI read performance but cards vary widely in SPI

-write performance.  Write performance is limited by how efficiently the

-card manages internal erase/remapping operations.  The Arduino cannot

-optimize writes to reduce erase operations because of its limit RAM.

-

-SanDisk cards generally have good write performance.  They seem to have

-more internal RAM buffering than other cards and therefore can limit

-the number of flash erase operations that the Arduino forces due to its

-limited RAM.

-

-\section Hardware Hardware Configuration

-

-SdFat was developed using an

-<A HREF = "http://www.adafruit.com/"> Adafruit Industries</A> 

-<A HREF = "http://www.ladyada.net/make/waveshield/"> Wave Shield</A>.

-

-The hardware interface to the SD card should not use a resistor based level

-shifter.  SdFat sets the SPI bus frequency to 8 MHz which results in signal

-rise times that are too slow for the edge detectors in many newer SD card

-controllers when resistor voltage dividers are used.

-

-The 5 to 3.3 V level shifter for 5 V Arduinos should be IC based like the

-74HC4050N based circuit shown in the file SdLevel.png.  The Adafruit Wave Shield

-uses a 74AHC125N.  Gravitech sells SD and MicroSD Card Adapters based on the

-74LCX245.

-

-If you are using a resistor based level shifter and are having problems try

-setting the SPI bus frequency to 4 MHz.  This can be done by using 

-card.init(SPI_HALF_SPEED) to initialize the SD card.

-

-\section comment Bugs and Comments

-

-If you wish to report bugs or have comments, send email to fat16lib@sbcglobal.net.

-

-\section SdFatClass SdFat Usage

-

-SdFat uses a slightly restricted form of short names.

-Only printable ASCII characters are supported. No characters with code point

-values greater than 127 are allowed.  Space is not allowed even though space

-was allowed in the API of early versions of DOS.

-

-Short names are limited to 8 characters followed by an optional period (.)

-and extension of up to 3 characters.  The characters may be any combination

-of letters and digits.  The following special characters are also allowed:

-

-$ % ' - _ @ ~ ` ! ( ) { } ^ # &

-

-Short names are always converted to upper case and their original case

-value is lost.

-

-\note

-  The Arduino Print class uses character

-at a time writes so it was necessary to use a \link SdFile::sync() sync() \endlink

-function to control when data is written to the SD card.

-

-\par

-An application which writes to a file using \link Print::print() print()\endlink,

-\link Print::println() println() \endlink

-or \link SdFile::write write() \endlink must call \link SdFile::sync() sync() \endlink

-at the appropriate time to force data and directory information to be written

-to the SD Card.  Data and directory information are also written to the SD card

-when \link SdFile::close() close() \endlink is called.

-

-\par

-Applications must use care calling \link SdFile::sync() sync() \endlink

-since 2048 bytes of I/O is required to update file and

-directory information.  This includes writing the current data block, reading

-the block that contains the directory entry for update, writing the directory

-block back and reading back the current data block.

-

-It is possible to open a file with two or more instances of SdFile.  A file may

-be corrupted if data is written to the file by more than one instance of SdFile.

-

-\section HowTo How to format SD Cards as FAT Volumes

-

-You should use a freshly formatted SD card for best performance.  FAT

-file systems become slower if many files have been created and deleted.

-This is because the directory entry for a deleted file is marked as deleted,

-but is not deleted.  When a new file is created, these entries must be scanned

-before creating the file, a flaw in the FAT design.  Also files can become

-fragmented which causes reads and writes to be slower.

-

-Microsoft operating systems support removable media formatted with a

-Master Boot Record, MBR, or formatted as a super floppy with a FAT Boot Sector

-in block zero.

-

-Microsoft operating systems expect MBR formatted removable media

-to have only one partition. The first partition should be used.

-

-Microsoft operating systems do not support partitioning SD flash cards.

-If you erase an SD card with a program like KillDisk, Most versions of

-Windows will format the card as a super floppy.

-

-The best way to restore an SD card's format is to use SDFormatter

-which can be downloaded from:

-

-http://www.sdcard.org/consumers/formatter/

-

-SDFormatter aligns flash erase boundaries with file

-system structures which reduces write latency and file system overhead.

-

-SDFormatter does not have an option for FAT type so it may format

-small cards as FAT12.

-

-After the MBR is restored by SDFormatter you may need to reformat small

-cards that have been formatted FAT12 to force the volume type to be FAT16.

-

-If you reformat the SD card with an OS utility, choose a cluster size that

-will result in:

-

-4084 < CountOfClusters && CountOfClusters < 65525

-

-The volume will then be FAT16.

-

-If you are formatting an SD card on OS X or Linux, be sure to use the first

-partition. Format this partition with a cluster count in above range.

-

-\section  References References

-

-Adafruit Industries:

-

-http://www.adafruit.com/

-

-http://www.ladyada.net/make/waveshield/

-

-The Arduino site:

-

-http://www.arduino.cc/

-

-For more information about FAT file systems see:

-

-http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx

-

-For information about using SD cards as SPI devices see:

-

-http://www.sdcard.org/developers/tech/sdcard/pls/Simplified_Physical_Layer_Spec.pdf

-

-The ATmega328 datasheet:

-

-http://www.atmel.com/dyn/resources/prod_documents/doc8161.pdf

- 

-

- */  

diff --git a/libraries/SD/utility/SdFile.cpp b/libraries/SD/utility/SdFile.cpp
deleted file mode 100644
index e786f56..0000000
--- a/libraries/SD/utility/SdFile.cpp
+++ /dev/null
@@ -1,1253 +0,0 @@
-/* Arduino SdFat Library

- * Copyright (C) 2009 by William Greiman

- *

- * This file is part of the Arduino SdFat Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino SdFat Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#include <SdFat.h>

-#include <avr/pgmspace.h>

-#include <Arduino.h>

-//------------------------------------------------------------------------------

-// callback function for date/time

-void (*SdFile::dateTime_)(uint16_t* date, uint16_t* time) = NULL;

-

-#if ALLOW_DEPRECATED_FUNCTIONS

-// suppress cpplint warnings with NOLINT comment

-void (*SdFile::oldDateTime_)(uint16_t& date, uint16_t& time) = NULL;  // NOLINT

-#endif  // ALLOW_DEPRECATED_FUNCTIONS

-//------------------------------------------------------------------------------

-// add a cluster to a file

-uint8_t SdFile::addCluster() {

-  if (!vol_->allocContiguous(1, &curCluster_)) return false;

-

-  // if first cluster of file link to directory entry

-  if (firstCluster_ == 0) {

-    firstCluster_ = curCluster_;

-    flags_ |= F_FILE_DIR_DIRTY;

-  }

-  return true;

-}

-//------------------------------------------------------------------------------

-// Add a cluster to a directory file and zero the cluster.

-// return with first block of cluster in the cache

-uint8_t SdFile::addDirCluster(void) {

-  if (!addCluster()) return false;

-

-  // zero data in cluster insure first cluster is in cache

-  uint32_t block = vol_->clusterStartBlock(curCluster_);

-  for (uint8_t i = vol_->blocksPerCluster_; i != 0; i--) {

-    if (!SdVolume::cacheZeroBlock(block + i - 1)) return false;

-  }

-  // Increase directory file size by cluster size

-  fileSize_ += 512UL << vol_->clusterSizeShift_;

-  return true;

-}

-//------------------------------------------------------------------------------

-// cache a file's directory entry

-// return pointer to cached entry or null for failure

-dir_t* SdFile::cacheDirEntry(uint8_t action) {

-  if (!SdVolume::cacheRawBlock(dirBlock_, action)) return NULL;

-  return SdVolume::cacheBuffer_.dir + dirIndex_;

-}

-//------------------------------------------------------------------------------

-/**

- *  Close a file and force cached data and directory information

- *  to be written to the storage device.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include no file is open or an I/O error.

- */

-uint8_t SdFile::close(void) {

-  if (!sync())return false;

-  type_ = FAT_FILE_TYPE_CLOSED;

-  return true;

-}

-//------------------------------------------------------------------------------

-/**

- * Check for contiguous file and return its raw block range.

- *

- * \param[out] bgnBlock the first block address for the file.

- * \param[out] endBlock the last  block address for the file.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include file is not contiguous, file has zero length

- * or an I/O error occurred.

- */

-uint8_t SdFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) {

-  // error if no blocks

-  if (firstCluster_ == 0) return false;

-

-  for (uint32_t c = firstCluster_; ; c++) {

-    uint32_t next;

-    if (!vol_->fatGet(c, &next)) return false;

-

-    // check for contiguous

-    if (next != (c + 1)) {

-      // error if not end of chain

-      if (!vol_->isEOC(next)) return false;

-      *bgnBlock = vol_->clusterStartBlock(firstCluster_);

-      *endBlock = vol_->clusterStartBlock(c)

-                  + vol_->blocksPerCluster_ - 1;

-      return true;

-    }

-  }

-}

-//------------------------------------------------------------------------------

-/**

- * Create and open a new contiguous file of a specified size.

- *

- * \note This function only supports short DOS 8.3 names.

- * See open() for more information.

- *

- * \param[in] dirFile The directory where the file will be created.

- * \param[in] fileName A valid DOS 8.3 file name.

- * \param[in] size The desired file size.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include \a fileName contains

- * an invalid DOS 8.3 file name, the FAT volume has not been initialized,

- * a file is already open, the file already exists, the root

- * directory is full or an I/O error.

- *

- */

-uint8_t SdFile::createContiguous(SdFile* dirFile,

-        const char* fileName, uint32_t size) {

-  // don't allow zero length file

-  if (size == 0) return false;

-  if (!open(dirFile, fileName, O_CREAT | O_EXCL | O_RDWR)) return false;

-

-  // calculate number of clusters needed

-  uint32_t count = ((size - 1) >> (vol_->clusterSizeShift_ + 9)) + 1;

-

-  // allocate clusters

-  if (!vol_->allocContiguous(count, &firstCluster_)) {

-    remove();

-    return false;

-  }

-  fileSize_ = size;

-

-  // insure sync() will update dir entry

-  flags_ |= F_FILE_DIR_DIRTY;

-  return sync();

-}

-//------------------------------------------------------------------------------

-/**

- * Return a files directory entry

- *

- * \param[out] dir Location for return of the files directory entry.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t SdFile::dirEntry(dir_t* dir) {

-  // make sure fields on SD are correct

-  if (!sync()) return false;

-

-  // read entry

-  dir_t* p = cacheDirEntry(SdVolume::CACHE_FOR_READ);

-  if (!p) return false;

-

-  // copy to caller's struct

-  memcpy(dir, p, sizeof(dir_t));

-  return true;

-}

-//------------------------------------------------------------------------------

-/**

- * Format the name field of \a dir into the 13 byte array

- * \a name in standard 8.3 short name format.

- *

- * \param[in] dir The directory structure containing the name.

- * \param[out] name A 13 byte char array for the formatted name.

- */

-void SdFile::dirName(const dir_t& dir, char* name) {

-  uint8_t j = 0;

-  for (uint8_t i = 0; i < 11; i++) {

-    if (dir.name[i] == ' ')continue;

-    if (i == 8) name[j++] = '.';

-    name[j++] = dir.name[i];

-  }

-  name[j] = 0;

-}

-//------------------------------------------------------------------------------

-/** List directory contents to Serial.

- *

- * \param[in] flags The inclusive OR of

- *

- * LS_DATE - %Print file modification date

- *

- * LS_SIZE - %Print file size.

- *

- * LS_R - Recursive list of subdirectories.

- *

- * \param[in] indent Amount of space before file name. Used for recursive

- * list to indicate subdirectory level.

- */

-void SdFile::ls(uint8_t flags, uint8_t indent) {

-  dir_t* p;

-

-  rewind();

-  while ((p = readDirCache())) {

-    // done if past last used entry

-    if (p->name[0] == DIR_NAME_FREE) break;

-

-    // skip deleted entry and entries for . and  ..

-    if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') continue;

-

-    // only list subdirectories and files

-    if (!DIR_IS_FILE_OR_SUBDIR(p)) continue;

-

-    // print any indent spaces

-    for (int8_t i = 0; i < indent; i++) Serial.print(' ');

-

-    // print file name with possible blank fill

-    printDirName(*p, flags & (LS_DATE | LS_SIZE) ? 14 : 0);

-

-    // print modify date/time if requested

-    if (flags & LS_DATE) {

-       printFatDate(p->lastWriteDate);

-       Serial.print(' ');

-       printFatTime(p->lastWriteTime);

-    }

-    // print size if requested

-    if (!DIR_IS_SUBDIR(p) && (flags & LS_SIZE)) {

-      Serial.print(' ');

-      Serial.print(p->fileSize);

-    }

-    Serial.println();

-

-    // list subdirectory content if requested

-    if ((flags & LS_R) && DIR_IS_SUBDIR(p)) {

-      uint16_t index = curPosition()/32 - 1;

-      SdFile s;

-      if (s.open(this, index, O_READ)) s.ls(flags, indent + 2);

-      seekSet(32 * (index + 1));

-    }

-  }

-}

-//------------------------------------------------------------------------------

-// format directory name field from a 8.3 name string

-uint8_t SdFile::make83Name(const char* str, uint8_t* name) {

-  uint8_t c;

-  uint8_t n = 7;  // max index for part before dot

-  uint8_t i = 0;

-  // blank fill name and extension

-  while (i < 11) name[i++] = ' ';

-  i = 0;

-  while ((c = *str++) != '\0') {

-    if (c == '.') {

-      if (n == 10) return false;  // only one dot allowed

-      n = 10;  // max index for full 8.3 name

-      i = 8;   // place for extension

-    } else {

-      // illegal FAT characters

-      PGM_P p = PSTR("|<>^+=?/[];,*\"\\");

-      uint8_t b;

-      while ((b = pgm_read_byte(p++))) if (b == c) return false;

-      // check size and only allow ASCII printable characters

-      if (i > n || c < 0X21 || c > 0X7E)return false;

-      // only upper case allowed in 8.3 names - convert lower to upper

-      name[i++] = c < 'a' || c > 'z' ?  c : c + ('A' - 'a');

-    }

-  }

-  // must have a file name, extension is optional

-  return name[0] != ' ';

-}

-//------------------------------------------------------------------------------

-/** Make a new directory.

- *

- * \param[in] dir An open SdFat instance for the directory that will containing

- * the new directory.

- *

- * \param[in] dirName A valid 8.3 DOS name for the new directory.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include this SdFile is already open, \a dir is not a

- * directory, \a dirName is invalid or already exists in \a dir.

- */

-uint8_t SdFile::makeDir(SdFile* dir, const char* dirName) {

-  dir_t d;

-

-  // create a normal file

-  if (!open(dir, dirName, O_CREAT | O_EXCL | O_RDWR)) return false;

-

-  // convert SdFile to directory

-  flags_ = O_READ;

-  type_ = FAT_FILE_TYPE_SUBDIR;

-

-  // allocate and zero first cluster

-  if (!addDirCluster())return false;

-

-  // force entry to SD

-  if (!sync()) return false;

-

-  // cache entry - should already be in cache due to sync() call

-  dir_t* p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);

-  if (!p) return false;

-

-  // change directory entry  attribute

-  p->attributes = DIR_ATT_DIRECTORY;

-

-  // make entry for '.'

-  memcpy(&d, p, sizeof(d));

-  for (uint8_t i = 1; i < 11; i++) d.name[i] = ' ';

-  d.name[0] = '.';

-

-  // cache block for '.'  and '..'

-  uint32_t block = vol_->clusterStartBlock(firstCluster_);

-  if (!SdVolume::cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) return false;

-

-  // copy '.' to block

-  memcpy(&SdVolume::cacheBuffer_.dir[0], &d, sizeof(d));

-

-  // make entry for '..'

-  d.name[1] = '.';

-  if (dir->isRoot()) {

-    d.firstClusterLow = 0;

-    d.firstClusterHigh = 0;

-  } else {

-    d.firstClusterLow = dir->firstCluster_ & 0XFFFF;

-    d.firstClusterHigh = dir->firstCluster_ >> 16;

-  }

-  // copy '..' to block

-  memcpy(&SdVolume::cacheBuffer_.dir[1], &d, sizeof(d));

-

-  // set position after '..'

-  curPosition_ = 2 * sizeof(d);

-

-  // write first block

-  return SdVolume::cacheFlush();

-}

-//------------------------------------------------------------------------------

-/**

- * Open a file or directory by name.

- *

- * \param[in] dirFile An open SdFat instance for the directory containing the

- * file to be opened.

- *

- * \param[in] fileName A valid 8.3 DOS name for a file to be opened.

- *

- * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive

- * OR of flags from the following list

- *

- * O_READ - Open for reading.

- *

- * O_RDONLY - Same as O_READ.

- *

- * O_WRITE - Open for writing.

- *

- * O_WRONLY - Same as O_WRITE.

- *

- * O_RDWR - Open for reading and writing.

- *

- * O_APPEND - If set, the file offset shall be set to the end of the

- * file prior to each write.

- *

- * O_CREAT - If the file exists, this flag has no effect except as noted

- * under O_EXCL below. Otherwise, the file shall be created

- *

- * O_EXCL - If O_CREAT and O_EXCL are set, open() shall fail if the file exists.

- *

- * O_SYNC - Call sync() after each write.  This flag should not be used with

- * write(uint8_t), write_P(PGM_P), writeln_P(PGM_P), or the Arduino Print class.

- * These functions do character at a time writes so sync() will be called

- * after each byte.

- *

- * O_TRUNC - If the file exists and is a regular file, and the file is

- * successfully opened and is not read only, its length shall be truncated to 0.

- *

- * \note Directory files must be opened read only.  Write and truncation is

- * not allowed for directory files.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include this SdFile is already open, \a difFile is not

- * a directory, \a fileName is invalid, the file does not exist

- * or can't be opened in the access mode specified by oflag.

- */

-uint8_t SdFile::open(SdFile* dirFile, const char* fileName, uint8_t oflag) {

-  uint8_t dname[11];

-  dir_t* p;

-

-  // error if already open

-  if (isOpen())return false;

-

-  if (!make83Name(fileName, dname)) return false;

-  vol_ = dirFile->vol_;

-  dirFile->rewind();

-

-  // bool for empty entry found

-  uint8_t emptyFound = false;

-

-  // search for file

-  while (dirFile->curPosition_ < dirFile->fileSize_) {

-    uint8_t index = 0XF & (dirFile->curPosition_ >> 5);

-    p = dirFile->readDirCache();

-    if (p == NULL) return false;

-

-    if (p->name[0] == DIR_NAME_FREE || p->name[0] == DIR_NAME_DELETED) {

-      // remember first empty slot

-      if (!emptyFound) {

-        emptyFound = true;

-        dirIndex_ = index;

-        dirBlock_ = SdVolume::cacheBlockNumber_;

-      }

-      // done if no entries follow

-      if (p->name[0] == DIR_NAME_FREE) break;

-    } else if (!memcmp(dname, p->name, 11)) {

-      // don't open existing file if O_CREAT and O_EXCL

-      if ((oflag & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL)) return false;

-

-      // open found file

-      return openCachedEntry(0XF & index, oflag);

-    }

-  }

-  // only create file if O_CREAT and O_WRITE

-  if ((oflag & (O_CREAT | O_WRITE)) != (O_CREAT | O_WRITE)) return false;

-

-  // cache found slot or add cluster if end of file

-  if (emptyFound) {

-    p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);

-    if (!p) return false;

-  } else {

-    if (dirFile->type_ == FAT_FILE_TYPE_ROOT16) return false;

-

-    // add and zero cluster for dirFile - first cluster is in cache for write

-    if (!dirFile->addDirCluster()) return false;

-

-    // use first entry in cluster

-    dirIndex_ = 0;

-    p = SdVolume::cacheBuffer_.dir;

-  }

-  // initialize as empty file

-  memset(p, 0, sizeof(dir_t));

-  memcpy(p->name, dname, 11);

-

-  // set timestamps

-  if (dateTime_) {

-    // call user function

-    dateTime_(&p->creationDate, &p->creationTime);

-  } else {

-    // use default date/time

-    p->creationDate = FAT_DEFAULT_DATE;

-    p->creationTime = FAT_DEFAULT_TIME;

-  }

-  p->lastAccessDate = p->creationDate;

-  p->lastWriteDate = p->creationDate;

-  p->lastWriteTime = p->creationTime;

-

-  // force write of entry to SD

-  if (!SdVolume::cacheFlush()) return false;

-

-  // open entry in cache

-  return openCachedEntry(dirIndex_, oflag);

-}

-//------------------------------------------------------------------------------

-/**

- * Open a file by index.

- *

- * \param[in] dirFile An open SdFat instance for the directory.

- *

- * \param[in] index The \a index of the directory entry for the file to be

- * opened.  The value for \a index is (directory file position)/32.

- *

- * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive

- * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC.

- *

- * See open() by fileName for definition of flags and return values.

- *

- */

-uint8_t SdFile::open(SdFile* dirFile, uint16_t index, uint8_t oflag) {

-  // error if already open

-  if (isOpen())return false;

-

-  // don't open existing file if O_CREAT and O_EXCL - user call error

-  if ((oflag & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL)) return false;

-

-  vol_ = dirFile->vol_;

-

-  // seek to location of entry

-  if (!dirFile->seekSet(32 * index)) return false;

-

-  // read entry into cache

-  dir_t* p = dirFile->readDirCache();

-  if (p == NULL) return false;

-

-  // error if empty slot or '.' or '..'

-  if (p->name[0] == DIR_NAME_FREE ||

-      p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') {

-    return false;

-  }

-  // open cached entry

-  return openCachedEntry(index & 0XF, oflag);

-}

-//------------------------------------------------------------------------------

-// open a cached directory entry. Assumes vol_ is initializes

-uint8_t SdFile::openCachedEntry(uint8_t dirIndex, uint8_t oflag) {

-  // location of entry in cache

-  dir_t* p = SdVolume::cacheBuffer_.dir + dirIndex;

-

-  // write or truncate is an error for a directory or read-only file

-  if (p->attributes & (DIR_ATT_READ_ONLY | DIR_ATT_DIRECTORY)) {

-    if (oflag & (O_WRITE | O_TRUNC)) return false;

-  }

-  // remember location of directory entry on SD

-  dirIndex_ = dirIndex;

-  dirBlock_ = SdVolume::cacheBlockNumber_;

-

-  // copy first cluster number for directory fields

-  firstCluster_ = (uint32_t)p->firstClusterHigh << 16;

-  firstCluster_ |= p->firstClusterLow;

-

-  // make sure it is a normal file or subdirectory

-  if (DIR_IS_FILE(p)) {

-    fileSize_ = p->fileSize;

-    type_ = FAT_FILE_TYPE_NORMAL;

-  } else if (DIR_IS_SUBDIR(p)) {

-    if (!vol_->chainSize(firstCluster_, &fileSize_)) return false;

-    type_ = FAT_FILE_TYPE_SUBDIR;

-  } else {

-    return false;

-  }

-  // save open flags for read/write

-  flags_ = oflag & (O_ACCMODE | O_SYNC | O_APPEND);

-

-  // set to start of file

-  curCluster_ = 0;

-  curPosition_ = 0;

-

-  // truncate file to zero length if requested

-  if (oflag & O_TRUNC) return truncate(0);

-  return true;

-}

-//------------------------------------------------------------------------------

-/**

- * Open a volume's root directory.

- *

- * \param[in] vol The FAT volume containing the root directory to be opened.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include the FAT volume has not been initialized

- * or it a FAT12 volume.

- */

-uint8_t SdFile::openRoot(SdVolume* vol) {

-  // error if file is already open

-  if (isOpen()) return false;

-

-  if (vol->fatType() == 16) {

-    type_ = FAT_FILE_TYPE_ROOT16;

-    firstCluster_ = 0;

-    fileSize_ = 32 * vol->rootDirEntryCount();

-  } else if (vol->fatType() == 32) {

-    type_ = FAT_FILE_TYPE_ROOT32;

-    firstCluster_ = vol->rootDirStart();

-    if (!vol->chainSize(firstCluster_, &fileSize_)) return false;

-  } else {

-    // volume is not initialized or FAT12

-    return false;

-  }

-  vol_ = vol;

-  // read only

-  flags_ = O_READ;

-

-  // set to start of file

-  curCluster_ = 0;

-  curPosition_ = 0;

-

-  // root has no directory entry

-  dirBlock_ = 0;

-  dirIndex_ = 0;

-  return true;

-}

-//------------------------------------------------------------------------------

-/** %Print the name field of a directory entry in 8.3 format to Serial.

- *

- * \param[in] dir The directory structure containing the name.

- * \param[in] width Blank fill name if length is less than \a width.

- */

-void SdFile::printDirName(const dir_t& dir, uint8_t width) {

-  uint8_t w = 0;

-  for (uint8_t i = 0; i < 11; i++) {

-    if (dir.name[i] == ' ')continue;

-    if (i == 8) {

-      Serial.print('.');

-      w++;

-    }

-    Serial.write(dir.name[i]);

-    w++;

-  }

-  if (DIR_IS_SUBDIR(&dir)) {

-    Serial.print('/');

-    w++;

-  }

-  while (w < width) {

-    Serial.print(' ');

-    w++;

-  }

-}

-//------------------------------------------------------------------------------

-/** %Print a directory date field to Serial.

- *

- *  Format is yyyy-mm-dd.

- *

- * \param[in] fatDate The date field from a directory entry.

- */

-void SdFile::printFatDate(uint16_t fatDate) {

-  Serial.print(FAT_YEAR(fatDate));

-  Serial.print('-');

-  printTwoDigits(FAT_MONTH(fatDate));

-  Serial.print('-');

-  printTwoDigits(FAT_DAY(fatDate));

-}

-//------------------------------------------------------------------------------

-/** %Print a directory time field to Serial.

- *

- * Format is hh:mm:ss.

- *

- * \param[in] fatTime The time field from a directory entry.

- */

-void SdFile::printFatTime(uint16_t fatTime) {

-  printTwoDigits(FAT_HOUR(fatTime));

-  Serial.print(':');

-  printTwoDigits(FAT_MINUTE(fatTime));

-  Serial.print(':');

-  printTwoDigits(FAT_SECOND(fatTime));

-}

-//------------------------------------------------------------------------------

-/** %Print a value as two digits to Serial.

- *

- * \param[in] v Value to be printed, 0 <= \a v <= 99

- */

-void SdFile::printTwoDigits(uint8_t v) {

-  char str[3];

-  str[0] = '0' + v/10;

-  str[1] = '0' + v % 10;

-  str[2] = 0;

-  Serial.print(str);

-}

-//------------------------------------------------------------------------------

-/**

- * Read data from a file starting at the current position.

- *

- * \param[out] buf Pointer to the location that will receive the data.

- *

- * \param[in] nbyte Maximum number of bytes to read.

- *

- * \return For success read() returns the number of bytes read.

- * A value less than \a nbyte, including zero, will be returned

- * if end of file is reached.

- * If an error occurs, read() returns -1.  Possible errors include

- * read() called before a file has been opened, corrupt file system

- * or an I/O error occurred.

- */

-int16_t SdFile::read(void* buf, uint16_t nbyte) {

-  uint8_t* dst = reinterpret_cast<uint8_t*>(buf);

-

-  // error if not open or write only

-  if (!isOpen() || !(flags_ & O_READ)) return -1;

-

-  // max bytes left in file

-  if (nbyte > (fileSize_ - curPosition_)) nbyte = fileSize_ - curPosition_;

-

-  // amount left to read

-  uint16_t toRead = nbyte;

-  while (toRead > 0) {

-    uint32_t block;  // raw device block number

-    uint16_t offset = curPosition_ & 0X1FF;  // offset in block

-    if (type_ == FAT_FILE_TYPE_ROOT16) {

-      block = vol_->rootDirStart() + (curPosition_ >> 9);

-    } else {

-      uint8_t blockOfCluster = vol_->blockOfCluster(curPosition_);

-      if (offset == 0 && blockOfCluster == 0) {

-        // start of new cluster

-        if (curPosition_ == 0) {

-          // use first cluster in file

-          curCluster_ = firstCluster_;

-        } else {

-          // get next cluster from FAT

-          if (!vol_->fatGet(curCluster_, &curCluster_)) return -1;

-        }

-      }

-      block = vol_->clusterStartBlock(curCluster_) + blockOfCluster;

-    }

-    uint16_t n = toRead;

-

-    // amount to be read from current block

-    if (n > (512 - offset)) n = 512 - offset;

-

-    // no buffering needed if n == 512 or user requests no buffering

-    if ((unbufferedRead() || n == 512) &&

-      block != SdVolume::cacheBlockNumber_) {

-      if (!vol_->readData(block, offset, n, dst)) return -1;

-      dst += n;

-    } else {

-      // read block to cache and copy data to caller

-      if (!SdVolume::cacheRawBlock(block, SdVolume::CACHE_FOR_READ)) return -1;

-      uint8_t* src = SdVolume::cacheBuffer_.data + offset;

-      uint8_t* end = src + n;

-      while (src != end) *dst++ = *src++;

-    }

-    curPosition_ += n;

-    toRead -= n;

-  }

-  return nbyte;

-}

-//------------------------------------------------------------------------------

-/**

- * Read the next directory entry from a directory file.

- *

- * \param[out] dir The dir_t struct that will receive the data.

- *

- * \return For success readDir() returns the number of bytes read.

- * A value of zero will be returned if end of file is reached.

- * If an error occurs, readDir() returns -1.  Possible errors include

- * readDir() called before a directory has been opened, this is not

- * a directory file or an I/O error occurred.

- */

-int8_t SdFile::readDir(dir_t* dir) {

-  int8_t n;

-  // if not a directory file or miss-positioned return an error

-  if (!isDir() || (0X1F & curPosition_)) return -1;

-

-  while ((n = read(dir, sizeof(dir_t))) == sizeof(dir_t)) {

-    // last entry if DIR_NAME_FREE

-    if (dir->name[0] == DIR_NAME_FREE) break;

-    // skip empty entries and entry for .  and ..

-    if (dir->name[0] == DIR_NAME_DELETED || dir->name[0] == '.') continue;

-    // return if normal file or subdirectory

-    if (DIR_IS_FILE_OR_SUBDIR(dir)) return n;

-  }

-  // error, end of file, or past last entry

-  return n < 0 ? -1 : 0;

-}

-//------------------------------------------------------------------------------

-// Read next directory entry into the cache

-// Assumes file is correctly positioned

-dir_t* SdFile::readDirCache(void) {

-  // error if not directory

-  if (!isDir()) return NULL;

-

-  // index of entry in cache

-  uint8_t i = (curPosition_ >> 5) & 0XF;

-

-  // use read to locate and cache block

-  if (read() < 0) return NULL;

-

-  // advance to next entry

-  curPosition_ += 31;

-

-  // return pointer to entry

-  return (SdVolume::cacheBuffer_.dir + i);

-}

-//------------------------------------------------------------------------------

-/**

- * Remove a file.

- *

- * The directory entry and all data for the file are deleted.

- *

- * \note This function should not be used to delete the 8.3 version of a

- * file that has a long name. For example if a file has the long name

- * "New Text Document.txt" you should not delete the 8.3 name "NEWTEX~1.TXT".

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include the file read-only, is a directory,

- * or an I/O error occurred.

- */

-uint8_t SdFile::remove(void) {

-  // free any clusters - will fail if read-only or directory

-  if (!truncate(0)) return false;

-

-  // cache directory entry

-  dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);

-  if (!d) return false;

-

-  // mark entry deleted

-  d->name[0] = DIR_NAME_DELETED;

-

-  // set this SdFile closed

-  type_ = FAT_FILE_TYPE_CLOSED;

-

-  // write entry to SD

-  return SdVolume::cacheFlush();

-}

-//------------------------------------------------------------------------------

-/**

- * Remove a file.

- *

- * The directory entry and all data for the file are deleted.

- *

- * \param[in] dirFile The directory that contains the file.

- * \param[in] fileName The name of the file to be removed.

- *

- * \note This function should not be used to delete the 8.3 version of a

- * file that has a long name. For example if a file has the long name

- * "New Text Document.txt" you should not delete the 8.3 name "NEWTEX~1.TXT".

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include the file is a directory, is read only,

- * \a dirFile is not a directory, \a fileName is not found

- * or an I/O error occurred.

- */

-uint8_t SdFile::remove(SdFile* dirFile, const char* fileName) {

-  SdFile file;

-  if (!file.open(dirFile, fileName, O_WRITE)) return false;

-  return file.remove();

-}

-//------------------------------------------------------------------------------

-/** Remove a directory file.

- *

- * The directory file will be removed only if it is empty and is not the

- * root directory.  rmDir() follows DOS and Windows and ignores the

- * read-only attribute for the directory.

- *

- * \note This function should not be used to delete the 8.3 version of a

- * directory that has a long name. For example if a directory has the

- * long name "New folder" you should not delete the 8.3 name "NEWFOL~1".

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include the file is not a directory, is the root

- * directory, is not empty, or an I/O error occurred.

- */

-uint8_t SdFile::rmDir(void) {

-  // must be open subdirectory

-  if (!isSubDir()) return false;

-

-  rewind();

-

-  // make sure directory is empty

-  while (curPosition_ < fileSize_) {

-    dir_t* p = readDirCache();

-    if (p == NULL) return false;

-    // done if past last used entry

-    if (p->name[0] == DIR_NAME_FREE) break;

-    // skip empty slot or '.' or '..'

-    if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') continue;

-    // error not empty

-    if (DIR_IS_FILE_OR_SUBDIR(p)) return false;

-  }

-  // convert empty directory to normal file for remove

-  type_ = FAT_FILE_TYPE_NORMAL;

-  flags_ |= O_WRITE;

-  return remove();

-}

-//------------------------------------------------------------------------------

-/** Recursively delete a directory and all contained files.

- *

- * This is like the Unix/Linux 'rm -rf *' if called with the root directory

- * hence the name.

- *

- * Warning - This will remove all contents of the directory including

- * subdirectories.  The directory will then be removed if it is not root.

- * The read-only attribute for files will be ignored.

- *

- * \note This function should not be used to delete the 8.3 version of

- * a directory that has a long name.  See remove() and rmDir().

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t SdFile::rmRfStar(void) {

-  rewind();

-  while (curPosition_ < fileSize_) {

-    SdFile f;

-

-    // remember position

-    uint16_t index = curPosition_/32;

-

-    dir_t* p = readDirCache();

-    if (!p) return false;

-

-    // done if past last entry

-    if (p->name[0] == DIR_NAME_FREE) break;

-

-    // skip empty slot or '.' or '..'

-    if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') continue;

-

-    // skip if part of long file name or volume label in root

-    if (!DIR_IS_FILE_OR_SUBDIR(p)) continue;

-

-    if (!f.open(this, index, O_READ)) return false;

-    if (f.isSubDir()) {

-      // recursively delete

-      if (!f.rmRfStar()) return false;

-    } else {

-      // ignore read-only

-      f.flags_ |= O_WRITE;

-      if (!f.remove()) return false;

-    }

-    // position to next entry if required

-    if (curPosition_ != (32*(index + 1))) {

-      if (!seekSet(32*(index + 1))) return false;

-    }

-  }

-  // don't try to delete root

-  if (isRoot()) return true;

-  return rmDir();

-}

-//------------------------------------------------------------------------------

-/**

- * Sets a file's position.

- *

- * \param[in] pos The new position in bytes from the beginning of the file.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t SdFile::seekSet(uint32_t pos) {

-  // error if file not open or seek past end of file

-  if (!isOpen() || pos > fileSize_) return false;

-

-  if (type_ == FAT_FILE_TYPE_ROOT16) {

-    curPosition_ = pos;

-    return true;

-  }

-  if (pos == 0) {

-    // set position to start of file

-    curCluster_ = 0;

-    curPosition_ = 0;

-    return true;

-  }

-  // calculate cluster index for cur and new position

-  uint32_t nCur = (curPosition_ - 1) >> (vol_->clusterSizeShift_ + 9);

-  uint32_t nNew = (pos - 1) >> (vol_->clusterSizeShift_ + 9);

-

-  if (nNew < nCur || curPosition_ == 0) {

-    // must follow chain from first cluster

-    curCluster_ = firstCluster_;

-  } else {

-    // advance from curPosition

-    nNew -= nCur;

-  }

-  while (nNew--) {

-    if (!vol_->fatGet(curCluster_, &curCluster_)) return false;

-  }

-  curPosition_ = pos;

-  return true;

-}

-//------------------------------------------------------------------------------

-/**

- * The sync() call causes all modified data and directory fields

- * to be written to the storage device.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include a call to sync() before a file has been

- * opened or an I/O error.

- */

-uint8_t SdFile::sync(void) {

-  // only allow open files and directories

-  if (!isOpen()) return false;

-

-  if (flags_ & F_FILE_DIR_DIRTY) {

-    dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);

-    if (!d) return false;

-

-    // do not set filesize for dir files

-    if (!isDir()) d->fileSize = fileSize_;

-

-    // update first cluster fields

-    d->firstClusterLow = firstCluster_ & 0XFFFF;

-    d->firstClusterHigh = firstCluster_ >> 16;

-

-    // set modify time if user supplied a callback date/time function

-    if (dateTime_) {

-      dateTime_(&d->lastWriteDate, &d->lastWriteTime);

-      d->lastAccessDate = d->lastWriteDate;

-    }

-    // clear directory dirty

-    flags_ &= ~F_FILE_DIR_DIRTY;

-  }

-  return SdVolume::cacheFlush();

-}

-//------------------------------------------------------------------------------

-/**

- * Set a file's timestamps in its directory entry.

- *

- * \param[in] flags Values for \a flags are constructed by a bitwise-inclusive

- * OR of flags from the following list

- *

- * T_ACCESS - Set the file's last access date.

- *

- * T_CREATE - Set the file's creation date and time.

- *

- * T_WRITE - Set the file's last write/modification date and time.

- *

- * \param[in] year Valid range 1980 - 2107 inclusive.

- *

- * \param[in] month Valid range 1 - 12 inclusive.

- *

- * \param[in] day Valid range 1 - 31 inclusive.

- *

- * \param[in] hour Valid range 0 - 23 inclusive.

- *

- * \param[in] minute Valid range 0 - 59 inclusive.

- *

- * \param[in] second Valid range 0 - 59 inclusive

- *

- * \note It is possible to set an invalid date since there is no check for

- * the number of days in a month.

- *

- * \note

- * Modify and access timestamps may be overwritten if a date time callback

- * function has been set by dateTimeCallback().

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- */

-uint8_t SdFile::timestamp(uint8_t flags, uint16_t year, uint8_t month,

-         uint8_t day, uint8_t hour, uint8_t minute, uint8_t second) {

-  if (!isOpen()

-    || year < 1980

-    || year > 2107

-    || month < 1

-    || month > 12

-    || day < 1

-    || day > 31

-    || hour > 23

-    || minute > 59

-    || second > 59) {

-      return false;

-  }

-  dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE);

-  if (!d) return false;

-

-  uint16_t dirDate = FAT_DATE(year, month, day);

-  uint16_t dirTime = FAT_TIME(hour, minute, second);

-  if (flags & T_ACCESS) {

-    d->lastAccessDate = dirDate;

-  }

-  if (flags & T_CREATE) {

-    d->creationDate = dirDate;

-    d->creationTime = dirTime;

-    // seems to be units of 1/100 second not 1/10 as Microsoft states

-    d->creationTimeTenths = second & 1 ? 100 : 0;

-  }

-  if (flags & T_WRITE) {

-    d->lastWriteDate = dirDate;

-    d->lastWriteTime = dirTime;

-  }

-  SdVolume::cacheSetDirty();

-  return sync();

-}

-//------------------------------------------------------------------------------

-/**

- * Truncate a file to a specified length.  The current file position

- * will be maintained if it is less than or equal to \a length otherwise

- * it will be set to end of file.

- *

- * \param[in] length The desired length for the file.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.

- * Reasons for failure include file is read only, file is a directory,

- * \a length is greater than the current file size or an I/O error occurs.

- */

-uint8_t SdFile::truncate(uint32_t length) {

-// error if not a normal file or read-only

-  if (!isFile() || !(flags_ & O_WRITE)) return false;

-

-  // error if length is greater than current size

-  if (length > fileSize_) return false;

-

-  // fileSize and length are zero - nothing to do

-  if (fileSize_ == 0) return true;

-

-  // remember position for seek after truncation

-  uint32_t newPos = curPosition_ > length ? length : curPosition_;

-

-  // position to last cluster in truncated file

-  if (!seekSet(length)) return false;

-

-  if (length == 0) {

-    // free all clusters

-    if (!vol_->freeChain(firstCluster_)) return false;

-    firstCluster_ = 0;

-  } else {

-    uint32_t toFree;

-    if (!vol_->fatGet(curCluster_, &toFree)) return false;

-

-    if (!vol_->isEOC(toFree)) {

-      // free extra clusters

-      if (!vol_->freeChain(toFree)) return false;

-

-      // current cluster is end of chain

-      if (!vol_->fatPutEOC(curCluster_)) return false;

-    }

-  }

-  fileSize_ = length;

-

-  // need to update directory entry

-  flags_ |= F_FILE_DIR_DIRTY;

-

-  if (!sync()) return false;

-

-  // set file to correct position

-  return seekSet(newPos);

-}

-//------------------------------------------------------------------------------

-/**

- * Write data to an open file.

- *

- * \note Data is moved to the cache but may not be written to the

- * storage device until sync() is called.

- *

- * \param[in] buf Pointer to the location of the data to be written.

- *

- * \param[in] nbyte Number of bytes to write.

- *

- * \return For success write() returns the number of bytes written, always

- * \a nbyte.  If an error occurs, write() returns -1.  Possible errors

- * include write() is called before a file has been opened, write is called

- * for a read-only file, device is full, a corrupt file system or an I/O error.

- *

- */

-size_t SdFile::write(const void* buf, uint16_t nbyte) {

-  // convert void* to uint8_t*  -  must be before goto statements

-  const uint8_t* src = reinterpret_cast<const uint8_t*>(buf);

-

-  // number of bytes left to write  -  must be before goto statements

-  uint16_t nToWrite = nbyte;

-

-  // error if not a normal file or is read-only

-  if (!isFile() || !(flags_ & O_WRITE)) goto writeErrorReturn;

-

-  // seek to end of file if append flag

-  if ((flags_ & O_APPEND) && curPosition_ != fileSize_) {

-    if (!seekEnd()) goto writeErrorReturn;

-  }

-

-  while (nToWrite > 0) {

-    uint8_t blockOfCluster = vol_->blockOfCluster(curPosition_);

-    uint16_t blockOffset = curPosition_ & 0X1FF;

-    if (blockOfCluster == 0 && blockOffset == 0) {

-      // start of new cluster

-      if (curCluster_ == 0) {

-        if (firstCluster_ == 0) {

-          // allocate first cluster of file

-          if (!addCluster()) goto writeErrorReturn;

-        } else {

-          curCluster_ = firstCluster_;

-        }

-      } else {

-        uint32_t next;

-        if (!vol_->fatGet(curCluster_, &next)) return false;

-        if (vol_->isEOC(next)) {

-          // add cluster if at end of chain

-          if (!addCluster()) goto writeErrorReturn;

-        } else {

-          curCluster_ = next;

-        }

-      }

-    }

-    // max space in block

-    uint16_t n = 512 - blockOffset;

-

-    // lesser of space and amount to write

-    if (n > nToWrite) n = nToWrite;

-

-    // block for data write

-    uint32_t block = vol_->clusterStartBlock(curCluster_) + blockOfCluster;

-    if (n == 512) {

-      // full block - don't need to use cache

-      // invalidate cache if block is in cache

-      if (SdVolume::cacheBlockNumber_ == block) {

-        SdVolume::cacheBlockNumber_ = 0XFFFFFFFF;

-      }

-      if (!vol_->writeBlock(block, src)) goto writeErrorReturn;

-      src += 512;

-    } else {

-      if (blockOffset == 0 && curPosition_ >= fileSize_) {

-        // start of new block don't need to read into cache

-        if (!SdVolume::cacheFlush()) goto writeErrorReturn;

-        SdVolume::cacheBlockNumber_ = block;

-        SdVolume::cacheSetDirty();

-      } else {

-        // rewrite part of block

-        if (!SdVolume::cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) {

-          goto writeErrorReturn;

-        }

-      }

-      uint8_t* dst = SdVolume::cacheBuffer_.data + blockOffset;

-      uint8_t* end = dst + n;

-      while (dst != end) *dst++ = *src++;

-    }

-    nToWrite -= n;

-    curPosition_ += n;

-  }

-  if (curPosition_ > fileSize_) {

-    // update fileSize and insure sync will update dir entry

-    fileSize_ = curPosition_;

-    flags_ |= F_FILE_DIR_DIRTY;

-  } else if (dateTime_ && nbyte) {

-    // insure sync will update modified date and time

-    flags_ |= F_FILE_DIR_DIRTY;

-  }

-

-  if (flags_ & O_SYNC) {

-    if (!sync()) goto writeErrorReturn;

-  }

-  return nbyte;

-

- writeErrorReturn:

-  // return for write error

-  //writeError = true;

-  setWriteError();

-  return 0;

-}

-//------------------------------------------------------------------------------

-/**

- * Write a byte to a file. Required by the Arduino Print class.

- *

- * Use SdFile::writeError to check for errors.

- */

-size_t SdFile::write(uint8_t b) {

-  return write(&b, 1);

-}

-//------------------------------------------------------------------------------

-/**

- * Write a string to a file. Used by the Arduino Print class.

- *

- * Use SdFile::writeError to check for errors.

- */

-size_t SdFile::write(const char* str) {

-  return write(str, strlen(str));

-}

-//------------------------------------------------------------------------------

-/**

- * Write a PROGMEM string to a file.

- *

- * Use SdFile::writeError to check for errors.

- */

-void SdFile::write_P(PGM_P str) {

-  for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c);

-}

-//------------------------------------------------------------------------------

-/**

- * Write a PROGMEM string followed by CR/LF to a file.

- *

- * Use SdFile::writeError to check for errors.

- */

-void SdFile::writeln_P(PGM_P str) {

-  write_P(str);

-  println();

-}

diff --git a/libraries/SD/utility/SdInfo.h b/libraries/SD/utility/SdInfo.h
deleted file mode 100644
index acde74d..0000000
--- a/libraries/SD/utility/SdInfo.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/* Arduino Sd2Card Library

- * Copyright (C) 2009 by William Greiman

- *

- * This file is part of the Arduino Sd2Card Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino Sd2Card Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#ifndef SdInfo_h

-#define SdInfo_h

-#include <stdint.h>

-// Based on the document:

-//

-// SD Specifications

-// Part 1

-// Physical Layer

-// Simplified Specification

-// Version 2.00

-// September 25, 2006

-//

-// www.sdcard.org/developers/tech/sdcard/pls/Simplified_Physical_Layer_Spec.pdf

-//------------------------------------------------------------------------------

-// SD card commands

-/** GO_IDLE_STATE - init card in spi mode if CS low */

-uint8_t const CMD0 = 0X00;

-/** SEND_IF_COND - verify SD Memory Card interface operating condition.*/

-uint8_t const CMD8 = 0X08;

-/** SEND_CSD - read the Card Specific Data (CSD register) */

-uint8_t const CMD9 = 0X09;

-/** SEND_CID - read the card identification information (CID register) */

-uint8_t const CMD10 = 0X0A;

-/** SEND_STATUS - read the card status register */

-uint8_t const CMD13 = 0X0D;

-/** READ_BLOCK - read a single data block from the card */

-uint8_t const CMD17 = 0X11;

-/** WRITE_BLOCK - write a single data block to the card */

-uint8_t const CMD24 = 0X18;

-/** WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION */

-uint8_t const CMD25 = 0X19;

-/** ERASE_WR_BLK_START - sets the address of the first block to be erased */

-uint8_t const CMD32 = 0X20;

-/** ERASE_WR_BLK_END - sets the address of the last block of the continuous

-    range to be erased*/

-uint8_t const CMD33 = 0X21;

-/** ERASE - erase all previously selected blocks */

-uint8_t const CMD38 = 0X26;

-/** APP_CMD - escape for application specific command */

-uint8_t const CMD55 = 0X37;

-/** READ_OCR - read the OCR register of a card */

-uint8_t const CMD58 = 0X3A;

-/** SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be

-     pre-erased before writing */

-uint8_t const ACMD23 = 0X17;

-/** SD_SEND_OP_COMD - Sends host capacity support information and

-    activates the card's initialization process */

-uint8_t const ACMD41 = 0X29;

-//------------------------------------------------------------------------------

-/** status for card in the ready state */

-uint8_t const R1_READY_STATE = 0X00;

-/** status for card in the idle state */

-uint8_t const R1_IDLE_STATE = 0X01;

-/** status bit for illegal command */

-uint8_t const R1_ILLEGAL_COMMAND = 0X04;

-/** start data token for read or write single block*/

-uint8_t const DATA_START_BLOCK = 0XFE;

-/** stop token for write multiple blocks*/

-uint8_t const STOP_TRAN_TOKEN = 0XFD;

-/** start data token for write multiple blocks*/

-uint8_t const WRITE_MULTIPLE_TOKEN = 0XFC;

-/** mask for data response tokens after a write block operation */

-uint8_t const DATA_RES_MASK = 0X1F;

-/** write data accepted token */

-uint8_t const DATA_RES_ACCEPTED = 0X05;

-//------------------------------------------------------------------------------

-typedef struct CID {

-  // byte 0

-  uint8_t mid;  // Manufacturer ID

-  // byte 1-2

-  char oid[2];  // OEM/Application ID

-  // byte 3-7

-  char pnm[5];  // Product name

-  // byte 8

-  unsigned prv_m : 4;  // Product revision n.m

-  unsigned prv_n : 4;

-  // byte 9-12

-  uint32_t psn;  // Product serial number

-  // byte 13

-  unsigned mdt_year_high : 4;  // Manufacturing date

-  unsigned reserved : 4;

-  // byte 14

-  unsigned mdt_month : 4;

-  unsigned mdt_year_low :4;

-  // byte 15

-  unsigned always1 : 1;

-  unsigned crc : 7;

-}cid_t;

-//------------------------------------------------------------------------------

-// CSD for version 1.00 cards

-typedef struct CSDV1 {

-  // byte 0

-  unsigned reserved1 : 6;

-  unsigned csd_ver : 2;

-  // byte 1

-  uint8_t taac;

-  // byte 2

-  uint8_t nsac;

-  // byte 3

-  uint8_t tran_speed;

-  // byte 4

-  uint8_t ccc_high;

-  // byte 5

-  unsigned read_bl_len : 4;

-  unsigned ccc_low : 4;

-  // byte 6

-  unsigned c_size_high : 2;

-  unsigned reserved2 : 2;

-  unsigned dsr_imp : 1;

-  unsigned read_blk_misalign :1;

-  unsigned write_blk_misalign : 1;

-  unsigned read_bl_partial : 1;

-  // byte 7

-  uint8_t c_size_mid;

-  // byte 8

-  unsigned vdd_r_curr_max : 3;

-  unsigned vdd_r_curr_min : 3;

-  unsigned c_size_low :2;

-  // byte 9

-  unsigned c_size_mult_high : 2;

-  unsigned vdd_w_cur_max : 3;

-  unsigned vdd_w_curr_min : 3;

-  // byte 10

-  unsigned sector_size_high : 6;

-  unsigned erase_blk_en : 1;

-  unsigned c_size_mult_low : 1;

-  // byte 11

-  unsigned wp_grp_size : 7;

-  unsigned sector_size_low : 1;

-  // byte 12

-  unsigned write_bl_len_high : 2;

-  unsigned r2w_factor : 3;

-  unsigned reserved3 : 2;

-  unsigned wp_grp_enable : 1;

-  // byte 13

-  unsigned reserved4 : 5;

-  unsigned write_partial : 1;

-  unsigned write_bl_len_low : 2;

-  // byte 14

-  unsigned reserved5: 2;

-  unsigned file_format : 2;

-  unsigned tmp_write_protect : 1;

-  unsigned perm_write_protect : 1;

-  unsigned copy : 1;

-  unsigned file_format_grp : 1;

-  // byte 15

-  unsigned always1 : 1;

-  unsigned crc : 7;

-}csd1_t;

-//------------------------------------------------------------------------------

-// CSD for version 2.00 cards

-typedef struct CSDV2 {

-  // byte 0

-  unsigned reserved1 : 6;

-  unsigned csd_ver : 2;

-  // byte 1

-  uint8_t taac;

-  // byte 2

-  uint8_t nsac;

-  // byte 3

-  uint8_t tran_speed;

-  // byte 4

-  uint8_t ccc_high;

-  // byte 5

-  unsigned read_bl_len : 4;

-  unsigned ccc_low : 4;

-  // byte 6

-  unsigned reserved2 : 4;

-  unsigned dsr_imp : 1;

-  unsigned read_blk_misalign :1;

-  unsigned write_blk_misalign : 1;

-  unsigned read_bl_partial : 1;

-  // byte 7

-  unsigned reserved3 : 2;

-  unsigned c_size_high : 6;

-  // byte 8

-  uint8_t c_size_mid;

-  // byte 9

-  uint8_t c_size_low;

-  // byte 10

-  unsigned sector_size_high : 6;

-  unsigned erase_blk_en : 1;

-  unsigned reserved4 : 1;

-  // byte 11

-  unsigned wp_grp_size : 7;

-  unsigned sector_size_low : 1;

-  // byte 12

-  unsigned write_bl_len_high : 2;

-  unsigned r2w_factor : 3;

-  unsigned reserved5 : 2;

-  unsigned wp_grp_enable : 1;

-  // byte 13

-  unsigned reserved6 : 5;

-  unsigned write_partial : 1;

-  unsigned write_bl_len_low : 2;

-  // byte 14

-  unsigned reserved7: 2;

-  unsigned file_format : 2;

-  unsigned tmp_write_protect : 1;

-  unsigned perm_write_protect : 1;

-  unsigned copy : 1;

-  unsigned file_format_grp : 1;

-  // byte 15

-  unsigned always1 : 1;

-  unsigned crc : 7;

-}csd2_t;

-//------------------------------------------------------------------------------

-// union of old and new style CSD register

-union csd_t {

-  csd1_t v1;

-  csd2_t v2;

-};

-#endif  // SdInfo_h

diff --git a/libraries/SD/utility/SdVolume.cpp b/libraries/SD/utility/SdVolume.cpp
deleted file mode 100644
index ece4acb..0000000
--- a/libraries/SD/utility/SdVolume.cpp
+++ /dev/null
@@ -1,295 +0,0 @@
-/* Arduino SdFat Library

- * Copyright (C) 2009 by William Greiman

- *

- * This file is part of the Arduino SdFat Library

- *

- * This Library is free software: you can redistribute it and/or modify

- * it under the terms of the GNU General Public License as published by

- * the Free Software Foundation, either version 3 of the License, or

- * (at your option) any later version.

- *

- * This Library is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with the Arduino SdFat Library.  If not, see

- * <http://www.gnu.org/licenses/>.

- */

-#include <SdFat.h>

-//------------------------------------------------------------------------------

-// raw block cache

-// init cacheBlockNumber_to invalid SD block number

-uint32_t SdVolume::cacheBlockNumber_ = 0XFFFFFFFF;

-cache_t  SdVolume::cacheBuffer_;     // 512 byte cache for Sd2Card

-Sd2Card* SdVolume::sdCard_;          // pointer to SD card object

-uint8_t  SdVolume::cacheDirty_ = 0;  // cacheFlush() will write block if true

-uint32_t SdVolume::cacheMirrorBlock_ = 0;  // mirror  block for second FAT

-//------------------------------------------------------------------------------

-// find a contiguous group of clusters

-uint8_t SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {

-  // start of group

-  uint32_t bgnCluster;

-

-  // flag to save place to start next search

-  uint8_t setStart;

-

-  // set search start cluster

-  if (*curCluster) {

-    // try to make file contiguous

-    bgnCluster = *curCluster + 1;

-

-    // don't save new start location

-    setStart = false;

-  } else {

-    // start at likely place for free cluster

-    bgnCluster = allocSearchStart_;

-

-    // save next search start if one cluster

-    setStart = 1 == count;

-  }

-  // end of group

-  uint32_t endCluster = bgnCluster;

-

-  // last cluster of FAT

-  uint32_t fatEnd = clusterCount_ + 1;

-

-  // search the FAT for free clusters

-  for (uint32_t n = 0;; n++, endCluster++) {

-    // can't find space checked all clusters

-    if (n >= clusterCount_) return false;

-

-    // past end - start from beginning of FAT

-    if (endCluster > fatEnd) {

-      bgnCluster = endCluster = 2;

-    }

-    uint32_t f;

-    if (!fatGet(endCluster, &f)) return false;

-

-    if (f != 0) {

-      // cluster in use try next cluster as bgnCluster

-      bgnCluster = endCluster + 1;

-    } else if ((endCluster - bgnCluster + 1) == count) {

-      // done - found space

-      break;

-    }

-  }

-  // mark end of chain

-  if (!fatPutEOC(endCluster)) return false;

-

-  // link clusters

-  while (endCluster > bgnCluster) {

-    if (!fatPut(endCluster - 1, endCluster)) return false;

-    endCluster--;

-  }

-  if (*curCluster != 0) {

-    // connect chains

-    if (!fatPut(*curCluster, bgnCluster)) return false;

-  }

-  // return first cluster number to caller

-  *curCluster = bgnCluster;

-

-  // remember possible next free cluster

-  if (setStart) allocSearchStart_ = bgnCluster + 1;

-

-  return true;

-}

-//------------------------------------------------------------------------------

-uint8_t SdVolume::cacheFlush(void) {

-  if (cacheDirty_) {

-    if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) {

-      return false;

-    }

-    // mirror FAT tables

-    if (cacheMirrorBlock_) {

-      if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data)) {

-        return false;

-      }

-      cacheMirrorBlock_ = 0;

-    }

-    cacheDirty_ = 0;

-  }

-  return true;

-}

-//------------------------------------------------------------------------------

-uint8_t SdVolume::cacheRawBlock(uint32_t blockNumber, uint8_t action) {

-  if (cacheBlockNumber_ != blockNumber) {

-    if (!cacheFlush()) return false;

-    if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) return false;

-    cacheBlockNumber_ = blockNumber;

-  }

-  cacheDirty_ |= action;

-  return true;

-}

-//------------------------------------------------------------------------------

-// cache a zero block for blockNumber

-uint8_t SdVolume::cacheZeroBlock(uint32_t blockNumber) {

-  if (!cacheFlush()) return false;

-

-  // loop take less flash than memset(cacheBuffer_.data, 0, 512);

-  for (uint16_t i = 0; i < 512; i++) {

-    cacheBuffer_.data[i] = 0;

-  }

-  cacheBlockNumber_ = blockNumber;

-  cacheSetDirty();

-  return true;

-}

-//------------------------------------------------------------------------------

-// return the size in bytes of a cluster chain

-uint8_t SdVolume::chainSize(uint32_t cluster, uint32_t* size) const {

-  uint32_t s = 0;

-  do {

-    if (!fatGet(cluster, &cluster)) return false;

-    s += 512UL << clusterSizeShift_;

-  } while (!isEOC(cluster));

-  *size = s;

-  return true;

-}

-//------------------------------------------------------------------------------

-// Fetch a FAT entry

-uint8_t SdVolume::fatGet(uint32_t cluster, uint32_t* value) const {

-  if (cluster > (clusterCount_ + 1)) return false;

-  uint32_t lba = fatStartBlock_;

-  lba += fatType_ == 16 ? cluster >> 8 : cluster >> 7;

-  if (lba != cacheBlockNumber_) {

-    if (!cacheRawBlock(lba, CACHE_FOR_READ)) return false;

-  }

-  if (fatType_ == 16) {

-    *value = cacheBuffer_.fat16[cluster & 0XFF];

-  } else {

-    *value = cacheBuffer_.fat32[cluster & 0X7F] & FAT32MASK;

-  }

-  return true;

-}

-//------------------------------------------------------------------------------

-// Store a FAT entry

-uint8_t SdVolume::fatPut(uint32_t cluster, uint32_t value) {

-  // error if reserved cluster

-  if (cluster < 2) return false;

-

-  // error if not in FAT

-  if (cluster > (clusterCount_ + 1)) return false;

-

-  // calculate block address for entry

-  uint32_t lba = fatStartBlock_;

-  lba += fatType_ == 16 ? cluster >> 8 : cluster >> 7;

-

-  if (lba != cacheBlockNumber_) {

-    if (!cacheRawBlock(lba, CACHE_FOR_READ)) return false;

-  }

-  // store entry

-  if (fatType_ == 16) {

-    cacheBuffer_.fat16[cluster & 0XFF] = value;

-  } else {

-    cacheBuffer_.fat32[cluster & 0X7F] = value;

-  }

-  cacheSetDirty();

-

-  // mirror second FAT

-  if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;

-  return true;

-}

-//------------------------------------------------------------------------------

-// free a cluster chain

-uint8_t SdVolume::freeChain(uint32_t cluster) {

-  // clear free cluster location

-  allocSearchStart_ = 2;

-

-  do {

-    uint32_t next;

-    if (!fatGet(cluster, &next)) return false;

-

-    // free cluster

-    if (!fatPut(cluster, 0)) return false;

-

-    cluster = next;

-  } while (!isEOC(cluster));

-

-  return true;

-}

-//------------------------------------------------------------------------------

-/**

- * Initialize a FAT volume.

- *

- * \param[in] dev The SD card where the volume is located.

- *

- * \param[in] part The partition to be used.  Legal values for \a part are

- * 1-4 to use the corresponding partition on a device formatted with

- * a MBR, Master Boot Record, or zero if the device is formatted as

- * a super floppy with the FAT boot sector in block zero.

- *

- * \return The value one, true, is returned for success and

- * the value zero, false, is returned for failure.  Reasons for

- * failure include not finding a valid partition, not finding a valid

- * FAT file system in the specified partition or an I/O error.

- */

-uint8_t SdVolume::init(Sd2Card* dev, uint8_t part) {

-  uint32_t volumeStartBlock = 0;

-  sdCard_ = dev;

-  // if part == 0 assume super floppy with FAT boot sector in block zero

-  // if part > 0 assume mbr volume with partition table

-  if (part) {

-    if (part > 4)return false;

-    if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) return false;

-    part_t* p = &cacheBuffer_.mbr.part[part-1];

-    if ((p->boot & 0X7F) !=0  ||

-      p->totalSectors < 100 ||

-      p->firstSector == 0) {

-      // not a valid partition

-      return false;

-    }

-    volumeStartBlock = p->firstSector;

-  }

-  if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) return false;

-  bpb_t* bpb = &cacheBuffer_.fbs.bpb;

-  if (bpb->bytesPerSector != 512 ||

-    bpb->fatCount == 0 ||

-    bpb->reservedSectorCount == 0 ||

-    bpb->sectorsPerCluster == 0) {

-       // not valid FAT volume

-      return false;

-  }

-  fatCount_ = bpb->fatCount;

-  blocksPerCluster_ = bpb->sectorsPerCluster;

-

-  // determine shift that is same as multiply by blocksPerCluster_

-  clusterSizeShift_ = 0;

-  while (blocksPerCluster_ != (1 << clusterSizeShift_)) {

-    // error if not power of 2

-    if (clusterSizeShift_++ > 7) return false;

-  }

-  blocksPerFat_ = bpb->sectorsPerFat16 ?

-                    bpb->sectorsPerFat16 : bpb->sectorsPerFat32;

-

-  fatStartBlock_ = volumeStartBlock + bpb->reservedSectorCount;

-

-  // count for FAT16 zero for FAT32

-  rootDirEntryCount_ = bpb->rootDirEntryCount;

-

-  // directory start for FAT16 dataStart for FAT32

-  rootDirStart_ = fatStartBlock_ + bpb->fatCount * blocksPerFat_;

-

-  // data start for FAT16 and FAT32

-  dataStartBlock_ = rootDirStart_ + ((32 * bpb->rootDirEntryCount + 511)/512);

-

-  // total blocks for FAT16 or FAT32

-  uint32_t totalBlocks = bpb->totalSectors16 ?

-                           bpb->totalSectors16 : bpb->totalSectors32;

-  // total data blocks

-  clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock);

-

-  // divide by cluster size to get cluster count

-  clusterCount_ >>= clusterSizeShift_;

-

-  // FAT type is determined by cluster count

-  if (clusterCount_ < 4085) {

-    fatType_ = 12;

-  } else if (clusterCount_ < 65525) {

-    fatType_ = 16;

-  } else {

-    rootDirStart_ = bpb->fat32RootCluster;

-    fatType_ = 32;

-  }

-  return true;

-}