aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--cores/arduino/Arduino.h4
-rw-r--r--cores/arduino/HardwareSerial.cpp65
-rw-r--r--cores/arduino/HardwareSerial.h7
-rw-r--r--cores/arduino/USBAPI.h2
4 files changed, 35 insertions, 43 deletions
diff --git a/cores/arduino/Arduino.h b/cores/arduino/Arduino.h
index 8502e44..a189777 100644
--- a/cores/arduino/Arduino.h
+++ b/cores/arduino/Arduino.h
@@ -200,6 +200,10 @@ extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
#include "WCharacter.h"
#include "WString.h"
#include "HardwareSerial.h"
+#include "USBAPI.h"
+#if defined(HAVE_HWSERIAL0) && defined(HAVE_CDCSERIAL)
+#error "Targets with both UART0 and CDC serial not supported"
+#endif
uint16_t makeWord(uint16_t w);
uint16_t makeWord(byte h, byte l);
diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp
index 9a02f23..4318a1e 100644
--- a/cores/arduino/HardwareSerial.cpp
+++ b/cores/arduino/HardwareSerial.cpp
@@ -28,11 +28,11 @@
#include "Arduino.h"
#include "wiring_private.h"
+#include "HardwareSerial.h"
+
// this next line disables the entire HardwareSerial.cpp,
// this is so I can support Attiny series and any other chip without a uart
-#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
-
-#include "HardwareSerial.h"
+#if defined(HAVE_HWSERIAL0) || defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3)
// Ensure that the various bit positions we use are available with a 0
// postfix, so we can always use the values for UART0 for all UARTs. The
@@ -84,53 +84,44 @@
#error "Not all bit positions for UART3 are the same as for UART0"
#endif
-#if !defined(USART0_RX_vect) && defined(USART1_RX_vect)
-// do nothing - on the 32u4 the first USART is USART1
-#else
-#if !defined(USART_RX_vect) && !defined(USART0_RX_vect) && \
- !defined(USART_RXC_vect)
- #error "Don't know what the Data Received vector is called for the first UART"
-#else
+#if defined(HAVE_HWSERIAL0)
void serialEvent() __attribute__((weak));
void serialEvent() {}
- #define serialEvent_implemented
#if defined(USART_RX_vect)
ISR(USART_RX_vect)
#elif defined(USART0_RX_vect)
ISR(USART0_RX_vect)
#elif defined(USART_RXC_vect)
ISR(USART_RXC_vect) // ATmega8
+#else
+ #error "Don't know what the Data Received vector is called for the first UART"
#endif
{
Serial._rx_complete_irq();
}
#endif
-#endif
-#if defined(USART1_RX_vect)
+#if defined(HAVE_HWSERIAL1)
void serialEvent1() __attribute__((weak));
void serialEvent1() {}
- #define serialEvent1_implemented
ISR(USART1_RX_vect)
{
Serial1._rx_complete_irq();
}
#endif
-#if defined(USART2_RX_vect) && defined(UDR2)
+#if defined(HAVE_HWSERIAL2)
void serialEvent2() __attribute__((weak));
void serialEvent2() {}
- #define serialEvent2_implemented
ISR(USART2_RX_vect)
{
Serial2._rx_complete_irq();
}
#endif
-#if defined(USART3_RX_vect) && defined(UDR3)
+#if defined(HAVE_HWSERIAL3)
void serialEvent3() __attribute__((weak));
void serialEvent3() {}
- #define serialEvent3_implemented
ISR(USART3_RX_vect)
{
Serial3._rx_complete_irq();
@@ -139,27 +130,22 @@
void serialEventRun(void)
{
-#ifdef serialEvent_implemented
+#if defined(HAVE_HWSERIAL0)
if (Serial.available()) serialEvent();
#endif
-#ifdef serialEvent1_implemented
+#if defined(HAVE_HWSERIAL1)
if (Serial1.available()) serialEvent1();
#endif
-#ifdef serialEvent2_implemented
+#if defined(HAVE_HWSERIAL2)
if (Serial2.available()) serialEvent2();
#endif
-#ifdef serialEvent3_implemented
+#if defined(HAVE_HWSERIAL3)
if (Serial3.available()) serialEvent3();
#endif
}
-#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect)
-// do nothing - on the 32u4 the first USART is USART1
-#else
-#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect)
- #error "Don't know what the Data Register Empty vector is called for the first UART"
-#else
+#if defined(HAVE_HWSERIAL0)
#if defined(UART0_UDRE_vect)
ISR(UART0_UDRE_vect)
#elif defined(UART_UDRE_vect)
@@ -168,28 +154,29 @@ ISR(UART_UDRE_vect)
ISR(USART0_UDRE_vect)
#elif defined(USART_UDRE_vect)
ISR(USART_UDRE_vect)
+#else
+ #error "Don't know what the Data Register Empty vector is called for the first UART"
#endif
{
Serial._tx_udr_empty_irq();
}
#endif
-#endif
-#ifdef USART1_UDRE_vect
+#if defined(HAVE_HWSERIAL1)
ISR(USART1_UDRE_vect)
{
Serial1._tx_udr_empty_irq();
}
#endif
-#ifdef USART2_UDRE_vect
+#if defined(HAVE_HWSERIAL2)
ISR(USART2_UDRE_vect)
{
Serial2._tx_udr_empty_irq();
}
#endif
-#ifdef USART3_UDRE_vect
+#if defined(HAVE_HWSERIAL3)
ISR(USART3_UDRE_vect)
{
Serial3._tx_udr_empty_irq();
@@ -386,23 +373,21 @@ size_t HardwareSerial::write(uint8_t c)
// Preinstantiate Objects //////////////////////////////////////////////////////
+#if defined(HAVE_HWSERIAL0)
#if defined(UBRRH) && defined(UBRRL)
HardwareSerial Serial(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
-#elif defined(UBRR0H) && defined(UBRR0L)
- HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0);
-#elif defined(USBCON)
- // do nothing - Serial object and buffers are initialized in CDC code
#else
- #error no serial port defined (port 0)
+ HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0);
+#endif
#endif
-#if defined(UBRR1H)
+#if defined(HAVE_HWSERIAL1)
HardwareSerial Serial1(&UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1);
#endif
-#if defined(UBRR2H)
+#if defined(HAVE_HWSERIAL2)
HardwareSerial Serial2(&UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2);
#endif
-#if defined(UBRR3H)
+#if defined(HAVE_HWSERIAL3)
HardwareSerial Serial3(&UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3);
#endif
diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h
index 0ae51f4..da9efbc 100644
--- a/cores/arduino/HardwareSerial.h
+++ b/cores/arduino/HardwareSerial.h
@@ -113,18 +113,19 @@ class HardwareSerial : public Stream
#if defined(UBRRH) || defined(UBRR0H)
extern HardwareSerial Serial;
-#elif defined(USBCON)
- #include "USBAPI.h"
-// extern HardwareSerial Serial_;
+ #define HAVE_HWSERIAL0
#endif
#if defined(UBRR1H)
extern HardwareSerial Serial1;
+ #define HAVE_HWSERIAL1
#endif
#if defined(UBRR2H)
extern HardwareSerial Serial2;
+ #define HAVE_HWSERIAL2
#endif
#if defined(UBRR3H)
extern HardwareSerial Serial3;
+ #define HAVE_HWSERIAL3
#endif
extern void serialEventRun(void) __attribute__((weak));
diff --git a/cores/arduino/USBAPI.h b/cores/arduino/USBAPI.h
index da2e869..5a33002 100644
--- a/cores/arduino/USBAPI.h
+++ b/cores/arduino/USBAPI.h
@@ -55,6 +55,8 @@ public:
};
extern Serial_ Serial;
+#define HAVE_CDCSERIAL
+
//================================================================================
//================================================================================
// Mouse
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 08:17:35 +0000