diff options
262 files changed, 31605 insertions, 279 deletions
diff --git a/bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex b/arduino/bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex index 4f36699..4f36699 100644 --- a/bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex +++ b/arduino/bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex @@ -1,524 +1,549 @@ # See: http://code.google.com/p/arduino/wiki/Platforms +menu.cpu=Processor + ############################################################## uno.name=Arduino Uno +uno.upload.tool=avrdude uno.upload.protocol=arduino uno.upload.maximum_size=32256 uno.upload.speed=115200 -uno.bootloader.low_fuses=0xff -uno.bootloader.high_fuses=0xde + +uno.bootloader.tool=avrdude +uno.bootloader.low_fuses=0xFF +uno.bootloader.high_fuses=0xDE uno.bootloader.extended_fuses=0x05 -uno.bootloader.path=optiboot -uno.bootloader.file=optiboot_atmega328.hex uno.bootloader.unlock_bits=0x3F uno.bootloader.lock_bits=0x0F +uno.bootloader.file=optiboot/optiboot_atmega328.hex + uno.build.mcu=atmega328p uno.build.f_cpu=16000000L +uno.build.board=ARDUINO_UNO uno.build.core=arduino uno.build.variant=standard ############################################################## -atmega328.name=Arduino Duemilanove w/ ATmega328 +atmega328diecimila.name=Arduino Duemilanove or Diecimila -atmega328.upload.protocol=arduino -atmega328.upload.maximum_size=30720 -atmega328.upload.speed=57600 +atmega328diecimila.upload.tool=avrdude +atmega328diecimila.upload.protocol=arduino -atmega328.bootloader.low_fuses=0xFF -atmega328.bootloader.high_fuses=0xDA -atmega328.bootloader.extended_fuses=0x05 -atmega328.bootloader.path=atmega -atmega328.bootloader.file=ATmegaBOOT_168_atmega328.hex -atmega328.bootloader.unlock_bits=0x3F -atmega328.bootloader.lock_bits=0x0F +atmega328diecimila.bootloader.tool=avrdude +atmega328diecimila.bootloader.low_fuses=0xFF +atmega328diecimila.bootloader.unlock_bits=0x3F +atmega328diecimila.bootloader.lock_bits=0x0F -atmega328.build.mcu=atmega328p -atmega328.build.f_cpu=16000000L -atmega328.build.core=arduino -atmega328.build.variant=standard +atmega328diecimila.build.f_cpu=16000000L +atmega328diecimila.build.board=ARDUINO_DUEMILANOVE +atmega328diecimila.build.core=arduino +atmega328diecimila.build.variant=standard -############################################################## +## Arduino Duemilanove or Diecimila w/ ATmega328 +menu.cpu.atmega328diecimila.atmega328=ATmega328 -diecimila.name=Arduino Diecimila or Duemilanove w/ ATmega168 +menu.cpu.atmega328diecimila.atmega328.upload.maximum_size=30720 +menu.cpu.atmega328diecimila.atmega328.upload.speed=57600 -diecimila.upload.protocol=arduino -diecimila.upload.maximum_size=14336 -diecimila.upload.speed=19200 +menu.cpu.atmega328diecimila.atmega328.bootloader.high_fuses=0xDA +menu.cpu.atmega328diecimila.atmega328.bootloader.extended_fuses=0x05 +menu.cpu.atmega328diecimila.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex -diecimila.bootloader.low_fuses=0xff -diecimila.bootloader.high_fuses=0xdd -diecimila.bootloader.extended_fuses=0x00 -diecimila.bootloader.path=atmega -diecimila.bootloader.file=ATmegaBOOT_168_diecimila.hex -diecimila.bootloader.unlock_bits=0x3F -diecimila.bootloader.lock_bits=0x0F - -diecimila.build.mcu=atmega168 -diecimila.build.f_cpu=16000000L -diecimila.build.core=arduino -diecimila.build.variant=standard - -############################################################## +menu.cpu.atmega328diecimila.atmega328.build.mcu=atmega328p -nano328.name=Arduino Nano w/ ATmega328 +## Arduino Duemilanove or Diecimila w/ ATmega168 +menu.cpu.atmega328diecimila.atmega168=ATmega168 -nano328.upload.protocol=arduino -nano328.upload.maximum_size=30720 -nano328.upload.speed=57600 +menu.cpu.atmega328diecimila.atmega168.upload.maximum_size=14336 +menu.cpu.atmega328diecimila.atmega168.upload.speed=19200 -nano328.bootloader.low_fuses=0xFF -nano328.bootloader.high_fuses=0xDA -nano328.bootloader.extended_fuses=0x05 -nano328.bootloader.path=atmega -nano328.bootloader.file=ATmegaBOOT_168_atmega328.hex -nano328.bootloader.unlock_bits=0x3F -nano328.bootloader.lock_bits=0x0F +menu.cpu.atmega328diecimila.atmega168.bootloader.high_fuses=0xdd +menu.cpu.atmega328diecimila.atmega168.bootloader.extended_fuses=0x00 +menu.cpu.atmega328diecimila.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex -nano328.build.mcu=atmega328p -nano328.build.f_cpu=16000000L -nano328.build.core=arduino -nano328.build.variant=eightanaloginputs +menu.cpu.atmega328diecimila.atmega168.build.mcu=atmega168 ############################################################## -nano.name=Arduino Nano w/ ATmega168 +nano.name=Arduino Nano +nano.upload.tool=avrdude nano.upload.protocol=arduino -nano.upload.maximum_size=14336 -nano.upload.speed=19200 - -nano.bootloader.low_fuses=0xff -nano.bootloader.high_fuses=0xdd -nano.bootloader.extended_fuses=0x00 -nano.bootloader.path=atmega -nano.bootloader.file=ATmegaBOOT_168_diecimila.hex + +nano.bootloader.tool=avrdude nano.bootloader.unlock_bits=0x3F nano.bootloader.lock_bits=0x0F -nano.build.mcu=atmega168 nano.build.f_cpu=16000000L +nano.build.board=ARDUINO_NANO nano.build.core=arduino nano.build.variant=eightanaloginputs +## Arduino Nano w/ ATmega328 +menu.cpu.nano.atmega328=ATmega328 + +menu.cpu.nano.atmega328.upload.maximum_size=30720 +menu.cpu.nano.atmega328.upload.speed=57600 + +menu.cpu.nano.atmega328.bootloader.low_fuses=0xFF +menu.cpu.nano.atmega328.bootloader.high_fuses=0xDA +menu.cpu.nano.atmega328.bootloader.extended_fuses=0x05 +menu.cpu.nano.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex + +menu.cpu.nano.atmega328.build.mcu=atmega328p + +## Arduino Nano w/ ATmega168 +menu.cpu.nano.atmega168=ATmega168 + +menu.cpu.nano.atmega168.upload.maximum_size=14336 +menu.cpu.nano.atmega168.upload.speed=19200 + +menu.cpu.nano.atmega168.bootloader.low_fuses=0xff +menu.cpu.nano.atmega168.bootloader.high_fuses=0xdd +menu.cpu.nano.atmega168.bootloader.extended_fuses=0x00 +menu.cpu.nano.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex + +menu.cpu.nano.atmega168.build.mcu=atmega168 + ############################################################## mega2560.name=Arduino Mega 2560 or Mega ADK +mega2560.cpu=2560 or ADK +mega2560.upload.tool=avrdude mega2560.upload.protocol=wiring mega2560.upload.maximum_size=258048 mega2560.upload.speed=115200 +mega2560.bootloader.tool=avrdude mega2560.bootloader.low_fuses=0xFF mega2560.bootloader.high_fuses=0xD8 mega2560.bootloader.extended_fuses=0xFD -mega2560.bootloader.path=stk500v2 -mega2560.bootloader.file=stk500boot_v2_mega2560.hex +mega2560.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex mega2560.bootloader.unlock_bits=0x3F mega2560.bootloader.lock_bits=0x0F mega2560.build.mcu=atmega2560 mega2560.build.f_cpu=16000000L +mega2560.build.board=ARDUINO_MEGA2560 mega2560.build.core=arduino mega2560.build.variant=mega ############################################################## mega.name=Arduino Mega (ATmega1280) +mega.cpu=ATmega1280 +mega.upload.tool=avrdude mega.upload.protocol=arduino mega.upload.maximum_size=126976 mega.upload.speed=57600 +mega.bootloader.tool=avrdude mega.bootloader.low_fuses=0xFF mega.bootloader.high_fuses=0xDA mega.bootloader.extended_fuses=0xF5 -mega.bootloader.path=atmega -mega.bootloader.file=ATmegaBOOT_168_atmega1280.hex +mega.bootloader.file=atmega/ATmegaBOOT_168_atmega1280.hex mega.bootloader.unlock_bits=0x3F mega.bootloader.lock_bits=0x0F mega.build.mcu=atmega1280 mega.build.f_cpu=16000000L +mega.build.board=ARDUINO_MEGA mega.build.core=arduino mega.build.variant=mega ############################################################## leonardo.name=Arduino Leonardo +leonardo.upload.tool=avrdude leonardo.upload.protocol=avr109 leonardo.upload.maximum_size=28672 leonardo.upload.speed=57600 leonardo.upload.disable_flushing=true +leonardo.upload.use_1200bps_touch=true +leonardo.upload.wait_for_upload_port=true + +leonardo.bootloader.tool=avrdude leonardo.bootloader.low_fuses=0xff leonardo.bootloader.high_fuses=0xd8 leonardo.bootloader.extended_fuses=0xcb -leonardo.bootloader.path=caterina -leonardo.bootloader.file=Caterina-Leonardo.hex +leonardo.bootloader.file=caterina/Caterina-Leonardo.hex leonardo.bootloader.unlock_bits=0x3F leonardo.bootloader.lock_bits=0x2F + leonardo.build.mcu=atmega32u4 leonardo.build.f_cpu=16000000L leonardo.build.vid=0x2341 leonardo.build.pid=0x8036 +leonardo.build.board=ARDUINO_LEONARDO leonardo.build.core=arduino leonardo.build.variant=leonardo - -############################################################## - -esplora.name=Arduino Esplora -esplora.upload.protocol=avr109 -esplora.upload.maximum_size=28672 -esplora.upload.speed=57600 -esplora.upload.disable_flushing=true -esplora.bootloader.low_fuses=0xff -esplora.bootloader.high_fuses=0xd8 -esplora.bootloader.extended_fuses=0xcb -esplora.bootloader.path=caterina -esplora.bootloader.file=Caterina-Esplora.hex -esplora.bootloader.unlock_bits=0x3F -esplora.bootloader.lock_bits=0x2F -esplora.build.mcu=atmega32u4 -esplora.build.f_cpu=16000000L -esplora.build.vid=0x2341 -esplora.build.pid=0x803C -esplora.build.core=arduino -esplora.build.variant=leonardo +leonardo.build.extra_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} ############################################################## micro.name=Arduino Micro +micro.upload.tool=avrdude micro.upload.protocol=avr109 micro.upload.maximum_size=28672 micro.upload.speed=57600 micro.upload.disable_flushing=true +micro.upload.use_1200bps_touch=true +micro.upload.wait_for_upload_port=true + +micro.bootloader.tool=avrdude micro.bootloader.low_fuses=0xff micro.bootloader.high_fuses=0xd8 micro.bootloader.extended_fuses=0xcb -micro.bootloader.path=caterina -micro.bootloader.file=Caterina-Micro.hex +micro.bootloader.file=caterina/Caterina-Micro.hex micro.bootloader.unlock_bits=0x3F micro.bootloader.lock_bits=0x2F + micro.build.mcu=atmega32u4 micro.build.f_cpu=16000000L micro.build.vid=0x2341 micro.build.pid=0x8037 +micro.build.board=ARDUINO_MICRO micro.build.core=arduino micro.build.variant=micro +micro.build.extra_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} ############################################################## -mini328.name=Arduino Mini w/ ATmega328 - -mini328.upload.protocol=arduino -mini328.upload.maximum_size=28672 -mini328.upload.speed=115200 +esplora.name=Arduino Esplora +esplora.upload.tool=avrdude +esplora.upload.protocol=avr109 +esplora.upload.maximum_size=28672 +esplora.upload.speed=57600 +esplora.upload.disable_flushing=true +esplora.upload.use_1200bps_touch=true +esplora.upload.wait_for_upload_port=true -mini328.bootloader.low_fuses=0xff -mini328.bootloader.high_fuses=0xd8 -mini328.bootloader.extended_fuses=0x05 -mini328.bootloader.path=optiboot -mini328.bootloader.file=optiboot_atmega328-Mini.hex -mini328.bootloader.unlock_bits=0x3F -mini328.bootloader.lock_bits=0x0F +esplora.bootloader.tool=avrdude +esplora.bootloader.low_fuses=0xff +esplora.bootloader.high_fuses=0xd8 +esplora.bootloader.extended_fuses=0xcb +esplora.bootloader.file=caterina/Caterina-Esplora.hex +esplora.bootloader.unlock_bits=0x3F +esplora.bootloader.lock_bits=0x2F -mini328.build.mcu=atmega328p -mini328.build.f_cpu=16000000L -mini328.build.core=arduino -mini328.build.variant=eightanaloginputs +esplora.build.mcu=atmega32u4 +esplora.build.f_cpu=16000000L +esplora.build.vid=0x2341 +esplora.build.pid=0x803c +esplora.build.board=ARDUINO_ESPLORA +esplora.build.core=arduino +esplora.build.variant=leonardo +esplora.build.extra_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} ############################################################## -mini.name=Arduino Mini w/ ATmega168 +mini.name=Arduino Mini +mini.upload.tool=avrdude mini.upload.protocol=arduino -mini.upload.maximum_size=14336 -mini.upload.speed=19200 +mini.bootloader.tool=avrdude mini.bootloader.low_fuses=0xff -mini.bootloader.high_fuses=0xdd -mini.bootloader.extended_fuses=0x00 -mini.bootloader.path=atmega -mini.bootloader.file=ATmegaBOOT_168_ng.hex mini.bootloader.unlock_bits=0x3F mini.bootloader.lock_bits=0x0F -mini.build.mcu=atmega168 mini.build.f_cpu=16000000L +mini.build.board=ARDUINO_MINI mini.build.core=arduino mini.build.variant=eightanaloginputs +## Arduino Mini w/ ATmega328 +menu.cpu.mini.atmega328=ATmega328 + +menu.cpu.mini.atmega328.upload.maximum_size=28672 +menu.cpu.mini.atmega328.upload.speed=115200 + +menu.cpu.mini.atmega328.bootloader.high_fuses=0xd8 +menu.cpu.mini.atmega328.bootloader.extended_fuses=0x05 +menu.cpu.mini.atmega328.bootloader.file=optiboot/optiboot_atmega328-Mini.hex + +menu.cpu.mini.atmega328.build.mcu=atmega328p + +## Arduino Mini w/ ATmega168 +menu.cpu.mini.atmega168=ATmega168 + +menu.cpu.mini.atmega168.upload.maximum_size=14336 +menu.cpu.mini.atmega168.upload.speed=19200 + +menu.cpu.mini.atmega168.bootloader.high_fuses=0xdd +menu.cpu.mini.atmega168.bootloader.extended_fuses=0x00 +menu.cpu.mini.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex + +menu.cpu.mini.atmega168.build.mcu=atmega168 + ############################################################## ethernet.name=Arduino Ethernet +ethernet.upload.tool=avrdude ethernet.upload.protocol=arduino ethernet.upload.maximum_size=32256 ethernet.upload.speed=115200 +ethernet.bootloader.tool=avrdude ethernet.bootloader.low_fuses=0xff ethernet.bootloader.high_fuses=0xde ethernet.bootloader.extended_fuses=0x05 -ethernet.bootloader.path=optiboot -ethernet.bootloader.file=optiboot_atmega328.hex +ethernet.bootloader.file=optiboot/optiboot_atmega328.hex ethernet.bootloader.unlock_bits=0x3F ethernet.bootloader.lock_bits=0x0F ethernet.build.variant=standard ethernet.build.mcu=atmega328p ethernet.build.f_cpu=16000000L +ethernet.build.board=ARDUINO_ETHERNET ethernet.build.core=arduino ############################################################## fio.name=Arduino Fio +fio.upload.tool=avrdude fio.upload.protocol=arduino fio.upload.maximum_size=30720 fio.upload.speed=57600 +fio.bootloader.tool=avrdude fio.bootloader.low_fuses=0xFF fio.bootloader.high_fuses=0xDA fio.bootloader.extended_fuses=0x05 -fio.bootloader.path=arduino:atmega -fio.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex +fio.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex fio.bootloader.unlock_bits=0x3F fio.bootloader.lock_bits=0x0F fio.build.mcu=atmega328p fio.build.f_cpu=8000000L +fio.build.board=ARDUINO_FIO fio.build.core=arduino fio.build.variant=eightanaloginputs ############################################################## -bt328.name=Arduino BT w/ ATmega328 - -bt328.upload.protocol=arduino -bt328.upload.maximum_size=28672 -bt328.upload.speed=19200 -bt328.upload.disable_flushing=true - -bt328.bootloader.low_fuses=0xff -bt328.bootloader.high_fuses=0xd8 -bt328.bootloader.extended_fuses=0x05 -bt328.bootloader.path=bt -bt328.bootloader.file=ATmegaBOOT_168_atmega328_bt.hex -bt328.bootloader.unlock_bits=0x3F -bt328.bootloader.lock_bits=0x0F - -bt328.build.mcu=atmega328p -bt328.build.f_cpu=16000000L -bt328.build.core=arduino -bt328.build.variant=eightanaloginputs - -############################################################## - -bt.name=Arduino BT w/ ATmega168 +bt.name=Arduino BT +bt.upload.tool=avrdude bt.upload.protocol=arduino -bt.upload.maximum_size=14336 bt.upload.speed=19200 bt.upload.disable_flushing=true +bt.bootloader.tool=avrdude bt.bootloader.low_fuses=0xff -bt.bootloader.high_fuses=0xdd -bt.bootloader.extended_fuses=0x00 -bt.bootloader.path=bt -bt.bootloader.file=ATmegaBOOT_168.hex bt.bootloader.unlock_bits=0x3F bt.bootloader.lock_bits=0x0F -bt.build.mcu=atmega168 bt.build.f_cpu=16000000L +bt.build.board=ARDUINO_BT bt.build.core=arduino bt.build.variant=eightanaloginputs +## Arduino BT w/ ATmega328 +menu.cpu.bt.atmega328=ATmega328 +menu.cpu.bt.atmega328.upload.maximum_size=28672 + +menu.cpu.bt.atmega328.bootloader.high_fuses=0xd8 +menu.cpu.bt.atmega328.bootloader.extended_fuses=0x05 +menu.cpu.bt.atmega328.bootloader.file=bt/ATmegaBOOT_168_atmega328_bt.hex + +menu.cpu.bt.atmega328.build.mcu=atmega328p + +## Arduino BT w/ ATmega168 +menu.cpu.bt.atmega168=ATmega168 +menu.cpu.bt.atmega168.upload.maximum_size=14336 + +menu.cpu.bt.atmega168.bootloader.high_fuses=0xdd +menu.cpu.bt.atmega168.bootloader.extended_fuses=0x00 +menu.cpu.bt.atmega168.bootloader.file=bt/ATmegaBOOT_168.hex + +menu.cpu.bt.atmega168.build.mcu=atmega168 + ############################################################## LilyPadUSB.name=LilyPad Arduino USB + +LilyPadUSB.upload.tool=avrdude LilyPadUSB.upload.protocol=avr109 LilyPadUSB.upload.maximum_size=28672 LilyPadUSB.upload.speed=57600 LilyPadUSB.upload.disable_flushing=true +LilyPadUSB.upload.use_1200bps_touch=true +LilyPadUSB.upload.wait_for_upload_port=true + +LilyPadUSB.bootloader.tool=avrdude LilyPadUSB.bootloader.low_fuses=0xff LilyPadUSB.bootloader.high_fuses=0xd8 LilyPadUSB.bootloader.extended_fuses=0xce -LilyPadUSB.bootloader.path=caterina-LilyPadUSB -LilyPadUSB.bootloader.file=Caterina-LilyPadUSB.hex +LilyPadUSB.bootloader.file=caterina-LilyPadUSB/Caterina-LilyPadUSB.hex LilyPadUSB.bootloader.unlock_bits=0x3F LilyPadUSB.bootloader.lock_bits=0x2F + LilyPadUSB.build.mcu=atmega32u4 LilyPadUSB.build.f_cpu=8000000L LilyPadUSB.build.vid=0x1B4F LilyPadUSB.build.pid=0x9208 +LilyPadUSB.build.board=ARDUINO_LILYPAD_USB LilyPadUSB.build.core=arduino LilyPadUSB.build.variant=leonardo +LilyPadUSB.build.extra_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} ############################################################## -lilypad328.name=LilyPad Arduino w/ ATmega328 - -lilypad328.upload.protocol=arduino -lilypad328.upload.maximum_size=30720 -lilypad328.upload.speed=57600 - -lilypad328.bootloader.low_fuses=0xFF -lilypad328.bootloader.high_fuses=0xDA -lilypad328.bootloader.extended_fuses=0x05 -lilypad328.bootloader.path=atmega -lilypad328.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex -lilypad328.bootloader.unlock_bits=0x3F -lilypad328.bootloader.lock_bits=0x0F - -lilypad328.build.mcu=atmega328p -lilypad328.build.f_cpu=8000000L -lilypad328.build.core=arduino -lilypad328.build.variant=standard - -############################################################## - -lilypad.name=LilyPad Arduino w/ ATmega168 +lilypad.name=LilyPad Arduino +lilypad.upload.tool=avrdude lilypad.upload.protocol=arduino -lilypad.upload.maximum_size=14336 -lilypad.upload.speed=19200 - -lilypad.bootloader.low_fuses=0xe2 -lilypad.bootloader.high_fuses=0xdd -lilypad.bootloader.extended_fuses=0x00 -lilypad.bootloader.path=lilypad -lilypad.bootloader.file=LilyPadBOOT_168.hex + +lilypad.bootloader.tool=avrdude lilypad.bootloader.unlock_bits=0x3F lilypad.bootloader.lock_bits=0x0F -lilypad.build.mcu=atmega168 lilypad.build.f_cpu=8000000L +lilypad.build.board=ARDUINO_LILYPAD lilypad.build.core=arduino lilypad.build.variant=standard -############################################################## +## LilyPad Arduino w/ ATmega328 +menu.cpu.lilypad.atmega328=ATmega328 + +menu.cpu.lilypad.atmega328.upload.maximum_size=30720 +menu.cpu.lilypad.atmega328.upload.speed=57600 + +menu.cpu.lilypad.atmega328.bootloader.low_fuses=0xFF +menu.cpu.lilypad.atmega328.bootloader.high_fuses=0xDA +menu.cpu.lilypad.atmega328.bootloader.extended_fuses=0x05 +menu.cpu.lilypad.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex + +menu.cpu.lilypad.atmega328.build.mcu=atmega328p -pro5v328.name=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328 +## LilyPad Arduino w/ ATmega168 +menu.cpu.lilypad.atmega168=ATmega168 -pro5v328.upload.protocol=arduino -pro5v328.upload.maximum_size=30720 -pro5v328.upload.speed=57600 +menu.cpu.lilypad.atmega168.upload.maximum_size=14336 +menu.cpu.lilypad.atmega168.upload.speed=19200 -pro5v328.bootloader.low_fuses=0xFF -pro5v328.bootloader.high_fuses=0xDA -pro5v328.bootloader.extended_fuses=0x05 -pro5v328.bootloader.path=atmega -pro5v328.bootloader.file=ATmegaBOOT_168_atmega328.hex -pro5v328.bootloader.unlock_bits=0x3F -pro5v328.bootloader.lock_bits=0x0F +menu.cpu.lilypad.atmega168.bootloader.low_fuses=0xe2 +menu.cpu.lilypad.atmega168.bootloader.high_fuses=0xdd +menu.cpu.lilypad.atmega168.bootloader.extended_fuses=0x00 +menu.cpu.lilypad.atmega168.bootloader.file=lilypad/LilyPadBOOT_168.hex -pro5v328.build.mcu=atmega328p -pro5v328.build.f_cpu=16000000L -pro5v328.build.core=arduino -pro5v328.build.variant=standard +menu.cpu.lilypad.atmega168.build.mcu=atmega168 ############################################################## -pro5v.name=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168 +pro.name=Arduino Pro or Pro Mini -pro5v.upload.protocol=arduino -pro5v.upload.maximum_size=14336 -pro5v.upload.speed=19200 +pro.upload.tool=avrdude +pro.upload.protocol=arduino -pro5v.bootloader.low_fuses=0xff -pro5v.bootloader.high_fuses=0xdd -pro5v.bootloader.extended_fuses=0x00 -pro5v.bootloader.path=atmega -pro5v.bootloader.file=ATmegaBOOT_168_diecimila.hex -pro5v.bootloader.unlock_bits=0x3F -pro5v.bootloader.lock_bits=0x0F +pro.bootloader.tool=avrdude +pro.bootloader.unlock_bits=0x3F +pro.bootloader.lock_bits=0x0F -pro5v.build.mcu=atmega168 -pro5v.build.f_cpu=16000000L -pro5v.build.core=arduino -pro5v.build.variant=standard +pro.build.board=ARDUINO_PRO +pro.build.core=arduino +pro.build.variant=standard -############################################################## +## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328 +menu.cpu.pro.16MHzatmega328=ATmega328 (5V, 16 MHz) -pro328.name=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328 +menu.cpu.pro.16MHzatmega328.upload.maximum_size=30720 +menu.cpu.pro.16MHzatmega328.upload.speed=57600 -pro328.upload.protocol=arduino -pro328.upload.maximum_size=30720 -pro328.upload.speed=57600 +menu.cpu.pro.16MHzatmega328.bootloader.low_fuses=0xFF +menu.cpu.pro.16MHzatmega328.bootloader.high_fuses=0xDA +menu.cpu.pro.16MHzatmega328.bootloader.extended_fuses=0x05 +menu.cpu.pro.16MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex -pro328.bootloader.low_fuses=0xFF -pro328.bootloader.high_fuses=0xDA -pro328.bootloader.extended_fuses=0x05 -pro328.bootloader.path=atmega -pro328.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex -pro328.bootloader.unlock_bits=0x3F -pro328.bootloader.lock_bits=0x0F +menu.cpu.pro.16MHzatmega328.build.mcu=atmega328p +menu.cpu.pro.16MHzatmega328.build.f_cpu=16000000L -pro328.build.mcu=atmega328p -pro328.build.f_cpu=8000000L -pro328.build.core=arduino -pro328.build.variant=standard +## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328 +menu.cpu.pro.8MHzatmega328=ATmega328 (3.3V, 8 MHz) -############################################################## +menu.cpu.pro.8MHzatmega328.upload.maximum_size=30720 +menu.cpu.pro.8MHzatmega328.upload.speed=57600 -pro.name=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168 +menu.cpu.pro.8MHzatmega328.bootloader.low_fuses=0xFF +menu.cpu.pro.8MHzatmega328.bootloader.high_fuses=0xDA +menu.cpu.pro.8MHzatmega328.bootloader.extended_fuses=0x05 +menu.cpu.pro.8MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex -pro.upload.protocol=arduino -pro.upload.maximum_size=14336 -pro.upload.speed=19200 - -pro.bootloader.low_fuses=0xc6 -pro.bootloader.high_fuses=0xdd -pro.bootloader.extended_fuses=0x00 -pro.bootloader.path=atmega -pro.bootloader.file=ATmegaBOOT_168_pro_8MHz.hex -pro.bootloader.unlock_bits=0x3F -pro.bootloader.lock_bits=0x0F +menu.cpu.pro.8MHzatmega328.build.mcu=atmega328p +menu.cpu.pro.8MHzatmega328.build.f_cpu=8000000L -pro.build.mcu=atmega168 -pro.build.f_cpu=8000000L -pro.build.core=arduino -pro.build.variant=standard +## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168 +menu.cpu.pro.16MHzatmega168=ATmega168 (5V, 16 MHz) -############################################################## +menu.cpu.pro.16MHzatmega168.upload.maximum_size=14336 +menu.cpu.pro.16MHzatmega168.upload.speed=19200 + +menu.cpu.pro.16MHzatmega168.bootloader.low_fuses=0xff +menu.cpu.pro.16MHzatmega168.bootloader.high_fuses=0xdd +menu.cpu.pro.16MHzatmega168.bootloader.extended_fuses=0x00 +menu.cpu.pro.16MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex -atmega168.name=Arduino NG or older w/ ATmega168 +menu.cpu.pro.16MHzatmega168.build.mcu=atmega168 +menu.cpu.pro.16MHzatmega168.build.f_cpu=16000000L -atmega168.upload.protocol=arduino -atmega168.upload.maximum_size=14336 -atmega168.upload.speed=19200 +## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168 +menu.cpu.pro.8MHzatmega168=ATmega168 (3.3V, 8 MHz) -atmega168.bootloader.low_fuses=0xff -atmega168.bootloader.high_fuses=0xdd -atmega168.bootloader.extended_fuses=0x00 -atmega168.bootloader.path=atmega -atmega168.bootloader.file=ATmegaBOOT_168_ng.hex -atmega168.bootloader.unlock_bits=0x3F -atmega168.bootloader.lock_bits=0x0F +menu.cpu.pro.8MHzatmega168.upload.maximum_size=14336 +menu.cpu.pro.8MHzatmega168.upload.speed=19200 -atmega168.build.mcu=atmega168 -atmega168.build.f_cpu=16000000L -atmega168.build.core=arduino -atmega168.build.variant=standard +menu.cpu.pro.8MHzatmega168.bootloader.low_fuses=0xc6 +menu.cpu.pro.8MHzatmega168.bootloader.high_fuses=0xdd +menu.cpu.pro.8MHzatmega168.bootloader.extended_fuses=0x00 +menu.cpu.pro.8MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_pro_8MHz.hex + +menu.cpu.pro.8MHzatmega168.build.mcu=atmega168 +menu.cpu.pro.8MHzatmega168.build.f_cpu=8000000L ############################################################## -atmega8.name=Arduino NG or older w/ ATmega8 +atmegang.name=Arduino NG or older + +atmegang.upload.tool=avrdude +atmegang.upload.protocol=arduino +atmegang.upload.speed=19200 + +atmegang.bootloader.tool=avrdude +atmegang.bootloader.unlock_bits=0x3F +atmegang.bootloader.lock_bits=0x0F + +atmegang.build.mcu=atmegang +atmegang.build.f_cpu=16000000L +atmegang.build.board=ARDUINO_NG +atmegang.build.core=arduino +atmegang.build.variant=standard + +## Arduino NG or older w/ ATmega168 +menu.cpu.atmegang.atmega168=ATmega168 + +menu.cpu.atmegang.atmega168.upload.maximum_size=14336 + +menu.cpu.atmegang.atmega168.bootloader.low_fuses=0xff +menu.cpu.atmegang.atmega168.bootloader.high_fuses=0xdd +menu.cpu.atmegang.atmega168.bootloader.extended_fuses=0x00 +menu.cpu.atmegang.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex + +menu.cpu.atmegang.atmega168.build.mcu=atmega168 + +## Arduino NG or older w/ ATmega8 +menu.cpu.atmegang.atmega8=ATmega8 -atmega8.upload.protocol=arduino -atmega8.upload.maximum_size=7168 -atmega8.upload.speed=19200 +menu.cpu.atmegang.atmega8.upload.maximum_size=7168 -atmega8.bootloader.low_fuses=0xdf -atmega8.bootloader.high_fuses=0xca -atmega8.bootloader.path=atmega8 -atmega8.bootloader.file=ATmegaBOOT-prod-firmware-2009-11-07.hex -atmega8.bootloader.unlock_bits=0x3F -atmega8.bootloader.lock_bits=0x0F +menu.cpu.atmegang.atmega8.bootloader.low_fuses=0xdf +menu.cpu.atmegang.atmega8.bootloader.high_fuses=0xca +menu.cpu.atmegang.atmega8.bootloader.file=atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex -atmega8.build.mcu=atmega8 -atmega8.build.f_cpu=16000000L -atmega8.build.core=arduino -atmega8.build.variant=standard +menu.cpu.atmegang.atmega8.build.mcu=atmega8 diff --git a/bootloaders/atmega/ATmegaBOOT_168.c b/bootloaders/atmega/ATmegaBOOT_168.c index 2b9fefa..2b9fefa 100755..100644 --- a/bootloaders/atmega/ATmegaBOOT_168.c +++ b/bootloaders/atmega/ATmegaBOOT_168.c diff --git a/bootloaders/atmega/Makefile b/bootloaders/atmega/Makefile index 0fd54db..0fd54db 100755..100644 --- a/bootloaders/atmega/Makefile +++ b/bootloaders/atmega/Makefile diff --git a/bootloaders/atmega8/ATmegaBOOT.c b/bootloaders/atmega8/ATmegaBOOT.c index 8c8d22a..8c8d22a 100755..100644 --- a/bootloaders/atmega8/ATmegaBOOT.c +++ b/bootloaders/atmega8/ATmegaBOOT.c diff --git a/bootloaders/bt/Makefile b/bootloaders/bt/Makefile index 431f2e7..431f2e7 100755..100644 --- a/bootloaders/bt/Makefile +++ b/bootloaders/bt/Makefile diff --git a/bootloaders/caterina-LilyPadUSB/Caterina.c b/bootloaders/caterina-LilyPadUSB/Caterina.c index 9a59081..9a59081 100755..100644 --- a/bootloaders/caterina-LilyPadUSB/Caterina.c +++ b/bootloaders/caterina-LilyPadUSB/Caterina.c diff --git a/bootloaders/caterina-LilyPadUSB/Caterina.h b/bootloaders/caterina-LilyPadUSB/Caterina.h index f8251d4..f8251d4 100755..100644 --- a/bootloaders/caterina-LilyPadUSB/Caterina.h +++ b/bootloaders/caterina-LilyPadUSB/Caterina.h diff --git a/bootloaders/caterina-LilyPadUSB/Descriptors.c b/bootloaders/caterina-LilyPadUSB/Descriptors.c index f58519f..f58519f 100755..100644 --- a/bootloaders/caterina-LilyPadUSB/Descriptors.c +++ b/bootloaders/caterina-LilyPadUSB/Descriptors.c diff --git a/bootloaders/caterina-LilyPadUSB/Descriptors.h b/bootloaders/caterina-LilyPadUSB/Descriptors.h index 94091ae..94091ae 100755..100644 --- a/bootloaders/caterina-LilyPadUSB/Descriptors.h +++ b/bootloaders/caterina-LilyPadUSB/Descriptors.h diff --git a/bootloaders/caterina-LilyPadUSB/Makefile b/bootloaders/caterina-LilyPadUSB/Makefile index 8443e14..8443e14 100755..100644 --- a/bootloaders/caterina-LilyPadUSB/Makefile +++ b/bootloaders/caterina-LilyPadUSB/Makefile diff --git a/bootloaders/caterina-LilyPadUSB/Readme.txt b/bootloaders/caterina-LilyPadUSB/Readme.txt index 9656a6e..9656a6e 100755..100644 --- a/bootloaders/caterina-LilyPadUSB/Readme.txt +++ b/bootloaders/caterina-LilyPadUSB/Readme.txt diff --git a/cores/arduino/Arduino.h b/cores/arduino/Arduino.h index b265825..02c2a8f 100755..100644 --- a/cores/arduino/Arduino.h +++ b/cores/arduino/Arduino.h @@ -15,6 +15,8 @@ extern "C"{ #endif +void yield(void); + #define HIGH 0x1 #define LOW 0x0 diff --git a/cores/arduino/Print.cpp b/cores/arduino/Print.cpp index 53961ec..53961ec 100755..100644 --- a/cores/arduino/Print.cpp +++ b/cores/arduino/Print.cpp diff --git a/cores/arduino/Print.h b/cores/arduino/Print.h index dc76150..dc76150 100755..100644 --- a/cores/arduino/Print.h +++ b/cores/arduino/Print.h diff --git a/cores/arduino/Tone.cpp b/cores/arduino/Tone.cpp index 9bb6fe7..9bb6fe7 100755..100644 --- a/cores/arduino/Tone.cpp +++ b/cores/arduino/Tone.cpp diff --git a/cores/arduino/hooks.c b/cores/arduino/hooks.c new file mode 100644 index 0000000..641eabc --- /dev/null +++ b/cores/arduino/hooks.c @@ -0,0 +1,31 @@ +/* + Copyright (c) 2012 Arduino. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/** + * Empty yield() hook. + * + * This function is intended to be used by library writers to build + * libraries or sketches that supports cooperative threads. + * + * Its defined as a weak symbol and it can be redefined to implement a + * real cooperative scheduler. + */ +static void __empty() { + // Empty +} +void yield(void) __attribute__ ((weak, alias("__empty"))); diff --git a/cores/arduino/wiring.c b/cores/arduino/wiring.c index a3c4390..5cbe241 100644 --- a/cores/arduino/wiring.c +++ b/cores/arduino/wiring.c @@ -111,6 +111,7 @@ void delay(unsigned long ms) uint16_t start = (uint16_t)micros(); while (ms > 0) { + yield(); if (((uint16_t)micros() - start) >= 1000) { ms--; start += 1000; diff --git a/cores/arduino/wiring_private.h b/cores/arduino/wiring_private.h index f678265..f678265 100755..100644 --- a/cores/arduino/wiring_private.h +++ b/cores/arduino/wiring_private.h diff --git a/cores/arduino/wiring_pulse.c b/cores/arduino/wiring_pulse.c index 0d96886..0d96886 100755..100644 --- a/cores/arduino/wiring_pulse.c +++ b/cores/arduino/wiring_pulse.c diff --git a/cores/arduino/wiring_shift.c b/cores/arduino/wiring_shift.c index cfe7867..cfe7867 100755..100644 --- a/cores/arduino/wiring_shift.c +++ b/cores/arduino/wiring_shift.c diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.c b/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.c index 7bed831..7bed831 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.c +++ b/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.c diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.h b/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.h index 4fb236e..4fb236e 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.h +++ b/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.h diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Board/LEDs.h b/firmwares/atmegaxxu2/arduino-usbdfu/Board/LEDs.h index 152e8f5..152e8f5 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbdfu/Board/LEDs.h +++ b/firmwares/atmegaxxu2/arduino-usbdfu/Board/LEDs.h diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.c b/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.c index 4deaa06..4deaa06 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.c +++ b/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.c diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.h b/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.h index 6c93f20..6c93f20 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.h +++ b/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.h diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/makefile b/firmwares/atmegaxxu2/arduino-usbdfu/makefile index 1fb4ed3..1fb4ed3 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbdfu/makefile +++ b/firmwares/atmegaxxu2/arduino-usbdfu/makefile diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c b/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c index 4de73c8..4de73c8 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c +++ b/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.c diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.h b/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.h index 99fde39..99fde39 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.h +++ b/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial.h diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Board/LEDs.h b/firmwares/atmegaxxu2/arduino-usbserial/Board/LEDs.h index 152e8f5..152e8f5 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbserial/Board/LEDs.h +++ b/firmwares/atmegaxxu2/arduino-usbserial/Board/LEDs.h diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c b/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c index 705dddf..705dddf 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c +++ b/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.c diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.h b/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.h index 3ac4e52..3ac4e52 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.h +++ b/firmwares/atmegaxxu2/arduino-usbserial/Descriptors.h diff --git a/firmwares/atmegaxxu2/arduino-usbserial/Lib/LightweightRingBuff.h b/firmwares/atmegaxxu2/arduino-usbserial/Lib/LightweightRingBuff.h index fb48c1f..fb48c1f 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbserial/Lib/LightweightRingBuff.h +++ b/firmwares/atmegaxxu2/arduino-usbserial/Lib/LightweightRingBuff.h diff --git a/firmwares/atmegaxxu2/arduino-usbserial/makefile b/firmwares/atmegaxxu2/arduino-usbserial/makefile index 79d6be2..79d6be2 100755..100644 --- a/firmwares/atmegaxxu2/arduino-usbserial/makefile +++ b/firmwares/atmegaxxu2/arduino-usbserial/makefile diff --git a/libraries/EEPROM/EEPROM.cpp b/libraries/EEPROM/EEPROM.cpp new file mode 100644 index 0000000..dfa1deb --- /dev/null +++ b/libraries/EEPROM/EEPROM.cpp @@ -0,0 +1,50 @@ +/* + EEPROM.cpp - EEPROM library + Copyright (c) 2006 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/****************************************************************************** + * Includes + ******************************************************************************/ + +#include <avr/eeprom.h> +#include "Arduino.h" +#include "EEPROM.h" + +/****************************************************************************** + * Definitions + ******************************************************************************/ + +/****************************************************************************** + * Constructors + ******************************************************************************/ + +/****************************************************************************** + * User API + ******************************************************************************/ + +uint8_t EEPROMClass::read(int address) +{ + return eeprom_read_byte((unsigned char *) address); +} + +void EEPROMClass::write(int address, uint8_t value) +{ + eeprom_write_byte((unsigned char *) address, value); +} + +EEPROMClass EEPROM; diff --git a/libraries/EEPROM/EEPROM.h b/libraries/EEPROM/EEPROM.h new file mode 100644 index 0000000..aa2b577 --- /dev/null +++ b/libraries/EEPROM/EEPROM.h @@ -0,0 +1,35 @@ +/* + EEPROM.h - EEPROM library + Copyright (c) 2006 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef EEPROM_h +#define EEPROM_h + +#include <inttypes.h> + +class EEPROMClass +{ + public: + uint8_t read(int); + void write(int, uint8_t); +}; + +extern EEPROMClass EEPROM; + +#endif + diff --git a/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino b/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino new file mode 100644 index 0000000..d1e29bd --- /dev/null +++ b/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino @@ -0,0 +1,23 @@ +/* + * EEPROM Clear + * + * Sets all of the bytes of the EEPROM to 0. + * This example code is in the public domain. + + */ + +#include <EEPROM.h> + +void setup() +{ + // write a 0 to all 512 bytes of the EEPROM + for (int i = 0; i < 512; i++) + EEPROM.write(i, 0); + + // turn the LED on when we're done + digitalWrite(13, HIGH); +} + +void loop() +{ +} diff --git a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino new file mode 100644 index 0000000..0709b2d --- /dev/null +++ b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino @@ -0,0 +1,43 @@ +/* + * EEPROM Read + * + * Reads the value of each byte of the EEPROM and prints it + * to the computer. + * This example code is in the public domain. + */ + +#include <EEPROM.h> + +// start reading from the first byte (address 0) of the EEPROM +int address = 0; +byte value; + +void setup() +{ + // initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } +} + +void loop() +{ + // read a byte from the current address of the EEPROM + value = EEPROM.read(address); + + Serial.print(address); + Serial.print("\t"); + Serial.print(value, DEC); + Serial.println(); + + // advance to the next address of the EEPROM + address = address + 1; + + // there are only 512 bytes of EEPROM, from 0 to 511, so if we're + // on address 512, wrap around to address 0 + if (address == 512) + address = 0; + + delay(500); +} diff --git a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino new file mode 100644 index 0000000..ae7c57e --- /dev/null +++ b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino @@ -0,0 +1,38 @@ +/* + * EEPROM Write + * + * Stores values read from analog input 0 into the EEPROM. + * These values will stay in the EEPROM when the board is + * turned off and may be retrieved later by another sketch. + */ + +#include <EEPROM.h> + +// the current address in the EEPROM (i.e. which byte +// we're going to write to next) +int addr = 0; + +void setup() +{ +} + +void loop() +{ + // need to divide by 4 because analog inputs range from + // 0 to 1023 and each byte of the EEPROM can only hold a + // value from 0 to 255. + int val = analogRead(0) / 4; + + // write the value to the appropriate byte of the EEPROM. + // these values will remain there when the board is + // turned off. + EEPROM.write(addr, val); + + // advance to the next address. there are 512 bytes in + // the EEPROM, so go back to 0 when we hit 512. + addr = addr + 1; + if (addr == 512) + addr = 0; + + delay(100); +} diff --git a/libraries/EEPROM/keywords.txt b/libraries/EEPROM/keywords.txt new file mode 100644 index 0000000..d3218fe --- /dev/null +++ b/libraries/EEPROM/keywords.txt @@ -0,0 +1,18 @@ +####################################### +# Syntax Coloring Map For Ultrasound +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +EEPROM KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/Esplora/Beginners/EsploraAccelerometer/EsploraAccelerometer.ino b/libraries/Esplora/Beginners/EsploraAccelerometer/EsploraAccelerometer.ino new file mode 100644 index 0000000..db5cc93 --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraAccelerometer/EsploraAccelerometer.ino @@ -0,0 +1,38 @@ +/* + Esplora Accelerometer + + This sketch shows you how to read the values from the accelerometer. + To see it in action, open the serial monitor and tilt the board. You'll see + the accelerometer values for each axis change when you tilt the board + on that axis. + + Created on 22 Dec 2012 + by Tom Igoe + + This example is in the public domain. + */ + +#include <Esplora.h> + +void setup() +{ + Serial.begin(9600); // initialize serial communications with your computer +} + +void loop() +{ + int xAxis = Esplora.readAccelerometer(X_AXIS); // read the X axis + int yAxis = Esplora.readAccelerometer(Y_AXIS); // read the Y axis + int zAxis = Esplora.readAccelerometer(Z_AXIS); // read the Z axis + + Serial.print("x: "); // print the label for X + Serial.print(xAxis); // print the value for the X axis + Serial.print("\ty: "); // print a tab character, then the label for Y + Serial.print(yAxis); // print the value for the Y axis + Serial.print("\tz: "); // print a tab character, then the label for Z + Serial.println(zAxis); // print the value for the Z axis + + delay(500); // wait half a second (500 milliseconds) +} + + diff --git a/libraries/Esplora/Beginners/EsploraBlink/EsploraBlink.ino b/libraries/Esplora/Beginners/EsploraBlink/EsploraBlink.ino new file mode 100644 index 0000000..e198551 --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraBlink/EsploraBlink.ino @@ -0,0 +1,42 @@ + +/* + Esplora Blink + + This sketch blinks the Esplora's RGB LED. It goes through + all three primary colors (red, green, blue), then it + combines them for secondary colors(yellow, cyan, magenta), then + it turns on all the colors for white. + For best results cover the LED with a piece of white paper to see the colors. + + Created on 22 Dec 2012 + by Tom Igoe + + This example is in the public domain. + */ + +#include <Esplora.h> + + +void setup() { + // There's nothing to set up for this sketch +} + +void loop() { + Esplora.writeRGB(255,0,0); // make the LED red + delay(1000); // wait 1 second + Esplora.writeRGB(0,255,0); // make the LED green + delay(1000); // wait 1 second + Esplora.writeRGB(0,0,255); // make the LED blue + delay(1000); // wait 1 second + Esplora.writeRGB(255,255,0); // make the LED yellow + delay(1000); // wait 1 second + Esplora.writeRGB(0,255,255); // make the LED cyan + delay(1000); // wait 1 second + Esplora.writeRGB(255,0,255); // make the LED magenta + delay(1000); // wait 1 second + Esplora.writeRGB(255,255,255);// make the LED white + delay(1000); // wait 1 second + +} + + diff --git a/libraries/Esplora/Beginners/EsploraJoystickMouse/EsploraJoystickMouse.ino b/libraries/Esplora/Beginners/EsploraJoystickMouse/EsploraJoystickMouse.ino new file mode 100644 index 0000000..8d9260e --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraJoystickMouse/EsploraJoystickMouse.ino @@ -0,0 +1,50 @@ +/* + Esplora Joystick Mouse + + This sketch shows you how to read the joystick and use it to control the movement + of the cursor on your computer. You're making your Esplora into a mouse! + + WARNING: this sketch will take over your mouse movement. If you lose control + of your mouse do the following: + 1) unplug the Esplora. + 2) open the EsploraBlink sketch + 3) hold the reset button down while plugging your Esplora back in + 4) while holding reset, click "Upload" + 5) when you see the message "Done compiling", release the reset button. + + This will stop your Esplora from controlling your mouse while you upload a sketch + that doesn't take control of the mouse. + + Created on 22 Dec 2012 + by Tom Igoe + + This example is in the public domain. + */ + +#include <Esplora.h> + +void setup() +{ + Serial.begin(9600); // initialize serial communication with your computer + Mouse.begin(); // take control of the mouse +} + +void loop() +{ + int xValue = Esplora.readJoystickX(); // read the joystick's X position + int yValue = Esplora.readJoystickY(); // read the joystick's Y position + int button = Esplora.readJoystickSwitch(); // read the joystick pushbutton + Serial.print("Joystick X: "); // print a label for the X value + Serial.print(xValue); // print the X value + Serial.print("\tY: "); // print a tab character and a label for the Y value + Serial.print(yValue); // print the Y value + Serial.print("\tButton: "); // print a tab character and a label for the button + Serial.print(button); // print the button value + + int mouseX = map( xValue,-512, 512, 10, -10); // map the X value to a range of movement for the mouse X + int mouseY = map( yValue,-512, 512, -10, 10); // map the Y value to a range of movement for the mouse Y + Mouse.move(mouseX, mouseY, 0); // move the mouse + + delay(10); // a short delay before moving again +} + diff --git a/libraries/Esplora/Beginners/EsploraLedShow/EsploraLedShow.ino b/libraries/Esplora/Beginners/EsploraLedShow/EsploraLedShow.ino new file mode 100644 index 0000000..3c617dc --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraLedShow/EsploraLedShow.ino @@ -0,0 +1,42 @@ +/* + Esplora LED Show + + Makes the RGB LED bright and glow as the joystick or the + slider are moved. + + Created on 22 november 2012 + By Enrico Gueli <enrico.gueli@gmail.com> + Modified 22 Dec 2012 + by Tom Igoe +*/ +#include <Esplora.h> + +void setup() { + // initialize the serial communication: + Serial.begin(9600); +} + +void loop() { + // read the sensors into variables: + int xAxis = Esplora.readJoystickX(); + int yAxis = Esplora.readJoystickY(); + int slider = Esplora.readSlider(); + + // convert the sensor readings to light levels: + byte red = map(xAxis, -512, 512, 0, 255); + byte green = map(yAxis, -512, 512, 0, 255); + byte blue = slider/4; + + // print the light levels: + Serial.print(red); + Serial.print(' '); + Serial.print(green); + Serial.print(' '); + Serial.println(blue); + + // write the light levels to the LED. + Esplora.writeRGB(red, green, blue); + + // add a delay to keep the LED from flickering: + delay(10); +} diff --git a/libraries/Esplora/Beginners/EsploraLedShow2/EsploraLedShow2.ino b/libraries/Esplora/Beginners/EsploraLedShow2/EsploraLedShow2.ino new file mode 100644 index 0000000..8f9f8a2 --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraLedShow2/EsploraLedShow2.ino @@ -0,0 +1,55 @@ +/* + Esplora Led/Microphone + + This simple sketch reads the microphone, light sensor, and slider. + Then it uses those readings to set the brightness of red, green and blue + channels of the RGB LED. The red channel will change with the loudness + "heared" by the microphone, the green channel changes as the + amount of light in the room and the blue channel will change + with the position of the slider. + + Created on 22 november 2012 + By Enrico Gueli <enrico.gueli@gmail.com> + Modified 24 Nov 2012 + by Tom Igoe +*/ + +#include <Esplora.h> + +void setup() { + // initialize the serial communication: + Serial.begin(9600); +} + +int lowLight = 400; // the light sensor reading when it's covered +int highLight = 1023; // the maximum light sensor reading +int minGreen = 0; // minimum brightness of the green LED +int maxGreen = 100; // maximum brightness of the green LED + +void loop() { + // read the sensors into variables: + int mic = Esplora.readMicrophone(); + int light = Esplora.readLightSensor(); + int slider = Esplora.readSlider(); + + // convert the sensor readings to light levels: + byte red = constrain(mic, 0, 255); + byte green = constrain( + map(light, lowLight, highLight, minGreen, maxGreen), + 0, 255); + byte blue = slider/4; + + // print the light levels (to see what's going on): + Serial.print(red); + Serial.print(' '); + Serial.print(green); + Serial.print(' '); + Serial.println(blue); + + // write the light levels to the LED. + // note that the green value is always 0: + Esplora.writeRGB(red, green, blue); + + // add a delay to keep the LED from flickering: + delay(10); +} diff --git a/libraries/Esplora/Beginners/EsploraLightCalibrator/EsploraLightCalibrator.ino b/libraries/Esplora/Beginners/EsploraLightCalibrator/EsploraLightCalibrator.ino new file mode 100644 index 0000000..c3eaff4 --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraLightCalibrator/EsploraLightCalibrator.ino @@ -0,0 +1,91 @@ +/* + Esplora Led calibration + + This sketch shows you how to read and calibrate the light sensor. + Because light levels vary from one location to another, you need to calibrate the + sensor for each location. To do this, you read the sensor for a few seconds, + and save the highest and lowest readings as maximum and minimum. + Then, when you're using the sensor's reading (for example, to set the brightness + of the LED), you map the sensor's reading to a range between the minimum + and the maximum. + + Created on 22 Dec 2012 + by Tom Igoe + + This example is in the public domain. + */ + +#include <Esplora.h> + +// variables: +int lightMin = 1023; // minimum sensor value +int lightMax = 0; // maximum sensor value +boolean calibrated = false; // whether the sensor's been calibrated yet + +void setup() { + // initialize the serial communication: + Serial.begin(9600); + + // print an intial message + Serial.println("To calibrate the light sensor, press and hold Switch 1"); +} + +void loop() { + // if switch 1 is pressed, go to the calibration function again: + if (Esplora.readButton(1) == LOW) { + calibrate(); + } + // read the sensor into a variable: + int light = Esplora.readLightSensor(); + + // map the light level to a brightness level for the LED + // using the calibration min and max: + int brightness = map(light, lightMin, lightMax, 0, 255); + // limit the brightness to a range from 0 to 255: + brightness = constrain(brightness, 0, 255); + // write the brightness to the blue LED. + Esplora.writeBlue(brightness); + + // if the calibration's been done, show the sensor and brightness + // levels in the serial monitor: + if (calibrated == true) { + // print the light sensor levels and the LED levels (to see what's going on): + Serial.print("light sensor level: "); + Serial.print(light); + Serial.print(" blue brightness: "); + Serial.println(brightness); + } + // add a delay to keep the LED from flickering: + delay(10); +} + +void calibrate() { + // tell the user what do to using the serial monitor: + Serial.println("While holding switch 1, shine a light on the light sensor, then cover it."); + + // calibrate while switch 1 is pressed: + while(Esplora.readButton(1) == LOW) { + // read the sensor value: + int light = Esplora.readLightSensor(); + + // record the maximum sensor value: + if (light > lightMax) { + lightMax = light; + } + + // record the minimum sensor value: + if (light < lightMin) { + lightMin = light; + } + // note that you're calibrated, for future reference: + calibrated = true; + } +} + + + + + + + + diff --git a/libraries/Esplora/Beginners/EsploraMusic/EsploraMusic.ino b/libraries/Esplora/Beginners/EsploraMusic/EsploraMusic.ino new file mode 100644 index 0000000..7a950fb --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraMusic/EsploraMusic.ino @@ -0,0 +1,53 @@ +/* + Esplora Music + + This sketch turns the Esplora in a simple musical instrument. + Press the Switch 1 and move the slider to see how it works. + + Created on 22 november 2012 + By Enrico Gueli <enrico.gueli@gmail.com> + modified 22 Dec 2012 + by Tom Igoe +*/ + + +#include <Esplora.h> + +// these are the frequencies for the notes from middle C +// to one octave above middle C: +const int note[] = { +262, // C +277, // C# +294, // D +311, // D# +330, // E +349, // F +370, // F# +392, // G +415, // G# +440, // A +466, // A# +494, // B +523 // C next octave +}; + +void setup() { +} + +void loop() { + // read the button labeled SWITCH_DOWN. If it's low, + // then play a note: + if (Esplora.readButton(SWITCH_DOWN) == LOW) { + int slider = Esplora.readSlider(); + + // use map() to map the slider's range to the + // range of notes you have: + byte thisNote = map(slider, 0, 1023, 0, 13); + // play the note corresponding to the slider's position: + Esplora.tone(note[thisNote]); + } + else { + // if the button isn't pressed, turn the note off: + Esplora.noTone(); + } +} diff --git a/libraries/Esplora/Beginners/EsploraSoundSensor/EsploraSoundSensor.ino b/libraries/Esplora/Beginners/EsploraSoundSensor/EsploraSoundSensor.ino new file mode 100644 index 0000000..3bf454f --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraSoundSensor/EsploraSoundSensor.ino @@ -0,0 +1,41 @@ +/* + Esplora Sound Sensor + + This sketch shows you how to read the microphone sensor. The microphone +will range from 0 (total silence) to 1023 (really loud). + When you're using the sensor's reading (for example, to set the brightness + of the LED), you map the sensor's reading to a range between the minimum + and the maximum. + + Created on 22 Dec 2012 + by Tom Igoe + + This example is in the public domain. + */ + +#include <Esplora.h> + +void setup() { + // initialize the serial communication: + Serial.begin(9600); +} + +void loop() { + // read the sensor into a variable: + int loudness = Esplora.readMicrophone(); + + // map the sound level to a brightness level for the LED: + int brightness = map(loudness, 0, 1023, 0, 255); + // write the brightness to the green LED: + Esplora.writeGreen(brightness); + + + // print the microphone levels and the LED levels (to see what's going on): + Serial.print("sound level: "); + Serial.print(loudness); + Serial.print(" Green brightness: "); + Serial.println(brightness); + // add a delay to keep the LED from flickering: + delay(10); +} + diff --git a/libraries/Esplora/Beginners/EsploraTemperatureSensor/EsploraTemperatureSensor.ino b/libraries/Esplora/Beginners/EsploraTemperatureSensor/EsploraTemperatureSensor.ino new file mode 100644 index 0000000..72bbf04 --- /dev/null +++ b/libraries/Esplora/Beginners/EsploraTemperatureSensor/EsploraTemperatureSensor.ino @@ -0,0 +1,37 @@ +/* + Esplora Temperature Sensor + + This sketch shows you how to read the Esplora's temperature sensor + You can read the temperature sensor in Farhenheit or Celsius. + + Created on 22 Dec 2012 + by Tom Igoe + + This example is in the public domain. + */ +#include <Esplora.h> + +void setup() +{ + Serial.begin(9600); // initialize serial communications with your computer +} + +void loop() +{ + // read the temperature sensor in Celsius, then Fahrenheit: + int celsius = Esplora.readTemperature(DEGREES_C); + int fahrenheit = Esplora.readTemperature(DEGREES_F); + + // print the results: + Serial.print("Temperature is: "); + Serial.print(celsius); + Serial.print(" degrees Celsius, or "); + Serial.print(fahrenheit); + Serial.println(" degrees Fahrenheit."); + Serial.println(" Fahrenheit = (9/5 * Celsius) + 32"); + + // wait a second before reading again: + delay(1000); +} + + diff --git a/libraries/Esplora/Esplora.cpp b/libraries/Esplora/Esplora.cpp new file mode 100644 index 0000000..29c9e19 --- /dev/null +++ b/libraries/Esplora/Esplora.cpp @@ -0,0 +1,184 @@ +/* + Esplora.cpp - Arduino Esplora board library + Written by Enrico Gueli + Copyright (c) 2012 Arduino(TM) All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + + +#include "Esplora.h" + +_Esplora Esplora; + +/* + * The following constants tell, for each accelerometer + * axis, which values are returned when the axis measures + * zero acceleration. + */ +const int ACCEL_ZERO_X = 320; +const int ACCEL_ZERO_Y = 330; +const int ACCEL_ZERO_Z = 310; + +const byte MUX_ADDR_PINS[] = { A0, A1, A2, A3 }; +const byte MUX_COM_PIN = A4; + +const int JOYSTICK_DEAD_ZONE = 100; + +const byte RED_PIN = 5; +const byte BLUE_PIN = 9; +const byte GREEN_PIN = 10; + +const byte BUZZER_PIN = 6; + +// non-multiplexer Esplora pins: +// Accelerometer: x-A5, y-A7, z-A6 +// External outputs: D3, D11 +// Buzzer: A8 +// RGB Led: red-D5, green-D10/A11, blue-D9/A10 +// Led 13: D13 + +const byte ACCEL_X_PIN = A5; +const byte ACCEL_Y_PIN = A11; +const byte ACCEL_Z_PIN = A6; + +const byte LED_PIN = 13; + +_Esplora::_Esplora() { + for (byte p=0; p<4; p++) { + pinMode(MUX_ADDR_PINS[p], OUTPUT); + } + pinMode(RED_PIN, OUTPUT); + pinMode(GREEN_PIN, OUTPUT); + pinMode(BLUE_PIN, OUTPUT); +} + +unsigned int _Esplora::readChannel(byte channel) { + digitalWrite(MUX_ADDR_PINS[0], (channel & 1) ? HIGH : LOW); + digitalWrite(MUX_ADDR_PINS[1], (channel & 2) ? HIGH : LOW); + digitalWrite(MUX_ADDR_PINS[2], (channel & 4) ? HIGH : LOW); + digitalWrite(MUX_ADDR_PINS[3], (channel & 8) ? HIGH : LOW); + // workaround to cope with lack of pullup resistor on joystick switch + if (channel == CH_JOYSTICK_SW) { + pinMode(MUX_COM_PIN, INPUT_PULLUP); + unsigned int joystickSwitchState = (digitalRead(MUX_COM_PIN) == HIGH) ? 1023 : 0; + digitalWrite(MUX_COM_PIN, LOW); + return joystickSwitchState; + } + else + return analogRead(MUX_COM_PIN); +} + +boolean _Esplora::joyLowHalf(byte joyCh) { + return (readChannel(joyCh) < 512 - JOYSTICK_DEAD_ZONE) + ? LOW : HIGH; +} + +boolean _Esplora::joyHighHalf(byte joyCh) { + return (readChannel(joyCh) > 512 + JOYSTICK_DEAD_ZONE) + ? LOW : HIGH; +} + +boolean _Esplora::readButton(byte ch) { + if (ch >= SWITCH_1 && ch <= SWITCH_4) { + ch--; + } + + switch(ch) { + case JOYSTICK_RIGHT: + return joyLowHalf(CH_JOYSTICK_X); + case JOYSTICK_LEFT: + return joyHighHalf(CH_JOYSTICK_X); + case JOYSTICK_UP: + return joyLowHalf(CH_JOYSTICK_Y); + case JOYSTICK_DOWN: + return joyHighHalf(CH_JOYSTICK_Y); + } + + unsigned int val = readChannel(ch); + return (val > 512) ? HIGH : LOW; +} + +boolean _Esplora::readJoystickButton() { + if (readChannel(CH_JOYSTICK_SW) == 1023) { + return HIGH; + } else if (readChannel(CH_JOYSTICK_SW) == 0) { + return LOW; + } +} + + +void _Esplora::writeRGB(byte r, byte g, byte b) { + writeRed(r); + writeGreen(g); + writeBlue(b); +} + +#define RGB_FUNC(name, pin, lastVar) \ +void _Esplora::write##name(byte val) { \ + if (val == lastVar) \ + return; \ + analogWrite(pin, val); \ + lastVar = val; \ + delay(5); \ +} \ +\ +byte _Esplora::read##name() { \ + return lastVar; \ +} + +RGB_FUNC(Red, RED_PIN, lastRed) +RGB_FUNC(Green, GREEN_PIN, lastGreen) +RGB_FUNC(Blue, BLUE_PIN, lastBlue) + +void _Esplora::tone(unsigned int freq) { + if (freq > 0) + ::tone(BUZZER_PIN, freq); + else + ::noTone(BUZZER_PIN); +} + +void _Esplora::tone(unsigned int freq, unsigned long duration) { + if (freq > 0) + ::tone(BUZZER_PIN, freq, duration); + else + ::noTone(BUZZER_PIN); +} + +void _Esplora::noTone() { + ::noTone(BUZZER_PIN); +} + +int _Esplora::readTemperature(const byte scale) { + long rawT = readChannel(CH_TEMPERATURE); + if (scale == DEGREES_C) { + return (int)((rawT * 500 / 1024) - 50); + } + else if (scale == DEGREES_F) { + return (int)((rawT * 450 / 512 ) - 58); + } + else { + return readTemperature(DEGREES_C); + } +} + +int _Esplora::readAccelerometer(const byte axis) { + switch (axis) { + case X_AXIS: return analogRead(ACCEL_X_PIN) - ACCEL_ZERO_X; + case Y_AXIS: return analogRead(ACCEL_Y_PIN) - ACCEL_ZERO_Y; + case Z_AXIS: return analogRead(ACCEL_Z_PIN) - ACCEL_ZERO_Z; + default: return 0; + } +} diff --git a/libraries/Esplora/Esplora.h b/libraries/Esplora/Esplora.h new file mode 100644 index 0000000..4f55345 --- /dev/null +++ b/libraries/Esplora/Esplora.h @@ -0,0 +1,165 @@ +/* + Esplora.h - Arduino Esplora board library + Written by Enrico Gueli + Copyright (c) 2012 Arduino(TM) All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef ESPLORA_H_ +#define ESPLORA_H_ + +#include <Arduino.h> + +/* + * The following constants are used internally by the Esplora + * library code. + */ + +const byte JOYSTICK_BASE = 16; // it's a "virtual" channel: its ID won't conflict with real ones + +const byte MAX_CHANNELS = 13; + +const byte CH_SWITCH_1 = 0; +const byte CH_SWITCH_2 = 1; +const byte CH_SWITCH_3 = 2; +const byte CH_SWITCH_4 = 3; +const byte CH_SLIDER = 4; +const byte CH_LIGHT = 5; +const byte CH_TEMPERATURE = 6; +const byte CH_MIC = 7; +const byte CH_JOYSTICK_SW = 10; +const byte CH_JOYSTICK_X = 11; +const byte CH_JOYSTICK_Y = 12; + +/* + * The following constants can be used with the readButton() + * method. + */ + +const byte SWITCH_1 = 1; +const byte SWITCH_2 = 2; +const byte SWITCH_3 = 3; +const byte SWITCH_4 = 4; + +const byte SWITCH_DOWN = SWITCH_1; +const byte SWITCH_LEFT = SWITCH_2; +const byte SWITCH_UP = SWITCH_3; +const byte SWITCH_RIGHT = SWITCH_4; + +const byte JOYSTICK_DOWN = JOYSTICK_BASE; +const byte JOYSTICK_LEFT = JOYSTICK_BASE+1; +const byte JOYSTICK_UP = JOYSTICK_BASE+2; +const byte JOYSTICK_RIGHT = JOYSTICK_BASE+3; + +/* + * These constants can be use for comparison with the value returned + * by the readButton() method. + */ +const boolean PRESSED = LOW; +const boolean RELEASED = HIGH; + +/* + * The following constants can be used with the readTemperature() + * method to specify the desired scale. + */ +const byte DEGREES_C = 0; +const byte DEGREES_F = 1; + +/* + * The following constants can be used with the readAccelerometer() + * method to specify the desired axis to return. + */ +const byte X_AXIS = 0; +const byte Y_AXIS = 1; +const byte Z_AXIS = 2; + + +class _Esplora { +private: + byte lastRed; + byte lastGreen; + byte lastBlue; + + unsigned int readChannel(byte channel); + + boolean joyLowHalf(byte joyCh); + boolean joyHighHalf(byte joyCh); + +public: + _Esplora(); + + /* + * Returns a number corresponding to the position of the + * linear potentiometer. 0 means full right, 1023 means + * full left. + */ + inline unsigned int readSlider() { return readChannel(CH_SLIDER); } + + /* + * Returns a number corresponding to the amount of ambient + * light sensed by the light sensor. + */ + inline unsigned int readLightSensor() { return readChannel(CH_LIGHT); } + + /* + * Returns the current ambient temperature, expressed either in Celsius + * or Fahreneit scale. + */ + int readTemperature(const byte scale); + + /* + * Returns a number corresponding to the amount of ambient noise. + */ + inline unsigned int readMicrophone() { return readChannel(CH_MIC); } + + inline unsigned int readJoystickSwitch() { return readChannel(CH_JOYSTICK_SW); } + + inline int readJoystickX() { + return readChannel(CH_JOYSTICK_X) - 512; + } + inline int readJoystickY() { + return readChannel(CH_JOYSTICK_Y) - 512; + } + + int readAccelerometer(const byte axis); + + /* + * Reads the current state of a button. It will return + * LOW if the button is pressed, and HIGH otherwise. + */ + boolean readButton(byte channel); + + boolean readJoystickButton(); + + void writeRGB(byte red, byte green, byte blue); + void writeRed(byte red); + void writeGreen(byte green); + void writeBlue(byte blue); + + byte readRed(); + byte readGreen(); + byte readBlue(); + + void tone(unsigned int freq); + void tone(unsigned int freq, unsigned long duration); + void noTone(); +}; + + + +extern _Esplora Esplora; + +#endif // ESPLORA_H_ diff --git a/libraries/Esplora/Experts/EsploraKart/EsploraKart.ino b/libraries/Esplora/Experts/EsploraKart/EsploraKart.ino new file mode 100644 index 0000000..4c1621c --- /dev/null +++ b/libraries/Esplora/Experts/EsploraKart/EsploraKart.ino @@ -0,0 +1,125 @@ +/* + Esplora Kart + + This sketch turns the Esplora into a PC game pad. + + It uses the both the analog joystick and the four switches. + By moving the joystick in a direction or by pressing a switch, + the PC will "see" that a key is pressed. If the PC is running + a game that has keyboard input, the Esplora can control it. + + The default configuration is suitable for SuperTuxKart, an + open-source racing game. It can be downloaded from + http://supertuxkart.sourceforge.net/ . + + Created on 22 november 2012 + By Enrico Gueli <enrico.gueli@gmail.com> +*/ + + +#include <Esplora.h> + +/* + You're going to handle eight different buttons. You'll use arrays, + which are ordered lists of variables with a fixed size. Each array + has an index (counting from 0) to keep track of the position + you're reading in the array, and each position can contain a number. + + This code uses three different arrays: one for the buttons you'll read; + a second to hold the current states of those buttons; and a third to hold + the keystrokes associated with each button. + */ + +/* + This array holds the last sensed state of each of the buttons + you're reading. + Later in the code, you'll read the button states, and compare them + to the previous states that are stored in this array. If the two + states are different, it means that the button was either + pressed or released. + */ +boolean buttonStates[8]; + +/* + This array holds the names of the buttons being read. + Later in the sketch, you'll use these names with + the method Esplora.readButton(x), where x + is one of these buttons. + */ +const byte buttons[] = { + JOYSTICK_DOWN, + JOYSTICK_LEFT, + JOYSTICK_UP, + JOYSTICK_RIGHT, + SWITCH_RIGHT, // fire + SWITCH_LEFT, // bend + SWITCH_UP, // nitro + SWITCH_DOWN, // look back +}; + +/* + This array tells what keystroke to send to the PC when a + button is pressed. + If you look at this array and the above one, you can see that + the "cursor down" keystroke is sent when the joystick is moved + down, the "cursor up" keystroke when the joystick is moved up + and so on. +*/ +const char keystrokes[] = { + KEY_DOWN_ARROW, + KEY_LEFT_ARROW, + KEY_UP_ARROW, + KEY_RIGHT_ARROW, + ' ', + 'V', + 'N', + 'B' +}; + +/* + This is code is run only at startup, to initialize the + virtual USB keyboard. +*/ +void setup() { + Keyboard.begin(); +} + +/* + After setup() is finished, this code is run continuously. + Here we continuously check if something happened with the + buttons. +*/ +void loop() { + + // Iterate through all the buttons: + for (byte thisButton=0; thisButton<8; thisButton++) { + boolean lastState = buttonStates[thisButton]; + boolean newState = Esplora.readButton(buttons[thisButton]); + if (lastState != newState) { // Something changed! + /* + The Keyboard library allows you to "press" and "release" the + keys as two distinct actions. These actions can be + linked to the buttons we're handling. + */ + if (newState == PRESSED) { + Keyboard.press(keystrokes[thisButton]); + } + else if (newState == RELEASED) { + Keyboard.release(keystrokes[thisButton]); + } + } + + // Store the new button state, so you can sense a difference later: + buttonStates[thisButton] = newState; + } + + /* + Wait a little bit (50ms) between a check and another. + When a mechanical switch is pressed or released, the + contacts may bounce very rapidly. If the check is done too + fast, these bounces may be confused as multiple presses and + may lead to unexpected behaviour. + */ + delay(50); +} + diff --git a/libraries/Esplora/Experts/EsploraPong/EsploraPong.ino b/libraries/Esplora/Experts/EsploraPong/EsploraPong.ino new file mode 100644 index 0000000..725a109 --- /dev/null +++ b/libraries/Esplora/Experts/EsploraPong/EsploraPong.ino @@ -0,0 +1,44 @@ +/* + Esplora Pong + + This sketch connects serially to a Processing sketch to control a Pong game. + It sends the position of the slider and the states of three pushbuttons to the + Processing sketch serially, separated by commas. The Processing sketch uses that + data to control the graphics in the sketch. + + The slider sets a paddle's height + Switch 1 is resets the game + Switch 2 resets the ball to the center + Switch 3 reverses the players + + You can play this game with one or two Esploras. + + Created on 22 Dec 2012 + by Tom Igoe + + This example is in the public domain. + */ + +#include <Esplora.h> + +void setup() { + Serial.begin(9600); // initialize serial communication +} + +void loop() { + // read the slider and three of the buttons + int slider = Esplora.readSlider(); + int resetButton = Esplora.readButton(SWITCH_1); + int serveButton = Esplora.readButton(SWITCH_3); + int switchPlayerButton = Esplora.readButton(SWITCH_4); + + Serial.print(slider); // print the slider value + Serial.print(","); // add a comma + Serial.print(resetButton); // print the reset button value + Serial.print(","); // add another comma + Serial.print(serveButton); // print the serve button value + Serial.print(","); // add another comma + Serial.println(switchPlayerButton); // print the last button with a newline + delay(10); // delay before sending the next set +} + diff --git a/libraries/Esplora/Experts/EsploraRemote/EsploraRemote.ino b/libraries/Esplora/Experts/EsploraRemote/EsploraRemote.ino new file mode 100644 index 0000000..2701089 --- /dev/null +++ b/libraries/Esplora/Experts/EsploraRemote/EsploraRemote.ino @@ -0,0 +1,116 @@ +/* + Esplora Remote + + This sketch allows to test all the Esplora's peripherals. + It is also used with the ProcessingStart sketch (for Processing). + + When uploaded, you can open the Serial monitor and write one of + the following commands (without quotes) to get an answer: + + "D": prints the current value of all sensors, separated by a comma. + See the dumpInputs() function below to get the meaning of + each value. + + "Rxxx" + "Gxxx" + "Bxxx": set the color of the RGB led. For example, write "R255" + to turn on the red to full brightness, "G128" to turn + the green to half brightness, or "G0" to turn off + the green channel. + + "Txxxx": play a tone with the buzzer. The number is the + frequency, e.g. "T440" plays the central A note. + Write "T0" to turn off the buzzer. + + + Created on 22 november 2012 + By Enrico Gueli <enrico.gueli@gmail.com> + Modified 23 Dec 2012 + by Tom Igoe + */ + +#include <Esplora.h> + +void setup() { + while(!Serial); // needed for Leonardo-based board like Esplora + Serial.begin(9600); +} + +void loop() { + if (Serial.available()) + parseCommand(); +} + +/* + * This function reads a character from the serial line and + * decide what to do next. The "what to do" part is given by + * function it calls (e.g. dumpInputs(), setRed() and so on). + */ +void parseCommand() { + char cmd = Serial.read(); + switch(cmd) { + case 'D': + dumpInputs(); + break; + case 'R': + setRed(); + break; + case 'G': + setGreen(); + break; + case 'B': + setBlue(); + break; + case 'T': + setTone(); + break; + } +} + +void dumpInputs() { + Serial.print(Esplora.readButton(SWITCH_1)); + Serial.print(','); + Serial.print(Esplora.readButton(SWITCH_2)); + Serial.print(','); + Serial.print(Esplora.readButton(SWITCH_3)); + Serial.print(','); + Serial.print(Esplora.readButton(SWITCH_4)); + Serial.print(','); + Serial.print(Esplora.readSlider()); + Serial.print(','); + Serial.print(Esplora.readLightSensor()); + Serial.print(','); + Serial.print(Esplora.readTemperature(DEGREES_C)); + Serial.print(','); + Serial.print(Esplora.readMicrophone()); + Serial.print(','); + Serial.print(Esplora.readJoystickSwitch()); + Serial.print(','); + Serial.print(Esplora.readJoystickX()); + Serial.print(','); + Serial.print(Esplora.readJoystickY()); + Serial.print(','); + Serial.print(Esplora.readAccelerometer(X_AXIS)); + Serial.print(','); + Serial.print(Esplora.readAccelerometer(Y_AXIS)); + Serial.print(','); + Serial.print(Esplora.readAccelerometer(Z_AXIS)); + Serial.println(); +} + +void setRed() { + Esplora.writeRed(Serial.parseInt()); +} + +void setGreen() { + Esplora.writeGreen(Serial.parseInt()); +} + +void setBlue() { + Esplora.writeBlue(Serial.parseInt()); +} + +void setTone() { + Esplora.tone(Serial.parseInt()); +} + diff --git a/libraries/Esplora/Experts/EsploraTable/EsploraTable.ino b/libraries/Esplora/Experts/EsploraTable/EsploraTable.ino new file mode 100644 index 0000000..712dffa --- /dev/null +++ b/libraries/Esplora/Experts/EsploraTable/EsploraTable.ino @@ -0,0 +1,213 @@ +/* + Esplora Table + + Acts like a keyboard that prints sensor + data in a table-like text, row by row. + + At startup, it does nothing. It waits for you to open a + spreadsheet (e.g. Google Drive spreadsheet) so it can write + data. By pressing Switch 1, it starts printing the table + headers and the first row of data. It waits a bit, then it + will print another row, and so on. + + The amount of time between each row is determined by the slider. + If put to full left, the sketch will wait 10 seconds; at + full right position, it will wait 5 minutes. An intermediate + position will make the sketch wait for some time in-between. + + Clicking the Switch 1 at any time will stop the logging. + + The color LED shows what the sketch is doing: + blue = idle, waiting for you to press Switch 1 to start logging + green = active; will print soon + red = printing data to the PC + + Created on 22 november 2012 + By Enrico Gueli <enrico.gueli@gmail.com> + modified 24 Nov 2012 + by Tom Igoe +*/ + +#include <Esplora.h> + +/* + * this variable tells if the data-logging is currently active. + */ +boolean active = false; + +/* + * this variable holds the time in the future when the sketch + * will "sample" the data (sampling is the act of reading some + * input at a known time). This variable is checked continuously + * against millis() to know when it's time to sample. + */ +unsigned long nextSampleAt = 0; + +/* + * This variable just holds the millis() value at the time the + * logging was activated. This is needed to enter the correct + * value in the "Time" column in the printed table. + */ +unsigned long startedAt = 0; + + +/* + * when the "active" variable is set to true, the same is done + * with this variable. This is needed because the code that does + * the "just-after-activation" stuff is run some time later than + * the code that says "be active now". + */ +boolean justActivated = false; + + +/* + * this variable holds the last sensed status of the switch press + * button. If the code sees a difference between the value of + * this variable and the current status of the switch, it means + * that the button was either pressed or released. + */ +boolean lastStartBtn = HIGH; + +/* + * Initialization code. The virtual USB keyboard must be + * initialized; the Serial class is needed just for debugging. + */ +void setup() { + Keyboard.begin(); + Serial.begin(9600); +} + +/* + * This code is run continuously. + */ +void loop() { + /* + * note: we don't use Arduino's delay() here, because we can't + * normally do anything while delaying. Our own version lets us + * check for button presses often enough to not miss any event. + */ + activeDelay(50); + + /* + * the justActivated variable may be set to true in the + * checkSwitchPress() function. Here we check its status to + * print the table headers and configure what's needed to. + */ + if (justActivated == true) { + justActivated = false; // do this just once + printHeaders(); + // do next sampling ASAP + nextSampleAt = startedAt = millis(); + } + + if (active == true) { + if (nextSampleAt < millis()) { + // it's time to sample! + int slider = Esplora.readSlider(); + // the row below maps the slider position to a range between + // 10 and 290 seconds. + int sampleInterval = map(slider, 0, 1023, 10, 290); + nextSampleAt = millis() + sampleInterval * 1000; + + logAndPrint(); + } + + // let the RGB led blink green once per second, for 200ms. + unsigned int ms = millis() % 1000; + if (ms < 200) + Esplora.writeGreen(50); + else + Esplora.writeGreen(0); + + Esplora.writeBlue(0); + } + else + // while not active, keep a reassuring blue color coming + // from the Esplora... + Esplora.writeBlue(20); + +} + +/* + * Print the table headers. + */ +void printHeaders() { + Keyboard.print("Time"); + Keyboard.write(KEY_TAB); + activeDelay(300); // Some spreadsheets are slow, e.g. Google + // Drive that wants to save every edit. + Keyboard.print("Accel X"); + Keyboard.write(KEY_TAB); + activeDelay(300); + Keyboard.print("Accel Y"); + Keyboard.write(KEY_TAB); + activeDelay(300); + Keyboard.print("Accel Z"); + Keyboard.println(); + activeDelay(300); +} + +void logAndPrint() { + // do all the samplings at once, because keystrokes have delays + unsigned long timeSecs = (millis() - startedAt) /1000; + int xAxis = Esplora.readAccelerometer(X_AXIS); + int yAxis = Esplora.readAccelerometer(Y_AXIS); + int zAxis = Esplora.readAccelerometer(Z_AXIS); + + Esplora.writeRed(100); + + Keyboard.print(timeSecs); + Keyboard.write(KEY_TAB); + activeDelay(300); + Keyboard.print(xAxis); + Keyboard.write(KEY_TAB); + activeDelay(300); + Keyboard.print(yAxis); + Keyboard.write(KEY_TAB); + activeDelay(300); + Keyboard.print(zAxis); + Keyboard.println(); + activeDelay(300); + Keyboard.write(KEY_HOME); + + Esplora.writeRed(0); +} + +/** + * Similar to delay(), but allows the program to do something else + * in the meanwhile. In particular, it calls checkSwitchPress(). + * Note 1: it may wait longer than the specified amount, not less; + * Note 2: beware of data synchronization issues, e.g. if the + * activeDelay() function alters some variables used by the + * caller of this function. + */ +void activeDelay(unsigned long amount) { + unsigned long at = millis() + amount; + while (millis() < at) { + checkSwitchPress(); + } +} + +/* + * This function reads the status of the switch; if it sees that + * it was pressed, toggles the status of the "active" variable. + * If it's set to true, also the justActivated variable is set to + * true, so the loop() function above can do the right things. + * This function should be called as often as possible and do as + * little as possible, because it can be called while another + * function is running. + */ +void checkSwitchPress() { + boolean startBtn = Esplora.readButton(SWITCH_DOWN); + + if (startBtn != lastStartBtn) { + if (startBtn == HIGH) { // button released + active = !active; + if (active) + justActivated = true; + } + + lastStartBtn = startBtn; + } +} + diff --git a/libraries/Esplora/keywords.txt b/libraries/Esplora/keywords.txt new file mode 100644 index 0000000..b225991 --- /dev/null +++ b/libraries/Esplora/keywords.txt @@ -0,0 +1,69 @@ +####################################### +# Syntax Coloring Map For Esplora +####################################### +# Class +####################################### + +Esplora KEYWORD3 + +####################################### +# Methods and Functions +####################################### + +begin KEYWORD2 +readSlider KEYWORD2 +readLightSensor KEYWORD2 +readTemperature KEYWORD2 +readMicrophone KEYWORD2 +readJoystickSwitch KEYWORD2 +readJoystickButton KEYWORD2 +readJoystickX KEYWORD2 +readJoystickY KEYWORD2 +readAccelerometer KEYWORD2 +readButton KEYWORD2 +writeRGB KEYWORD2 +writeRed KEYWORD2 +writeGreen KEYWORD2 +writeBlue KEYWORD2 +readRed KEYWORD2 +readGreen KEYWORD2 +readBlue KEYWORD2 +tone KEYWORD2 +noTone KEYWORD2 + + +####################################### +# Constants +####################################### + +JOYSTICK_BASE LITERAL1 +MAX_CHANNELS LITERAL1 +CH_SWITCH_1 LITERAL1 +CH_SWITCH_2 LITERAL1 +CH_SWITCH_3 LITERAL1 +CH_SWITCH_4 LITERAL1 +CH_SLIDER LITERAL1 +CH_LIGHT LITERAL1 +CH_TEMPERATURE LITERAL1 +CH_MIC LITERAL1 +CH_JOYSTICK_SW LITERAL1 +CH_JOYSTICK_X LITERAL1 +CH_JOYSTICK_Y LITERAL1 +SWITCH_1 LITERAL1 +SWITCH_2 LITERAL1 +SWITCH_3 LITERAL1 +SWITCH_4 LITERAL1 +SWITCH_DOWN LITERAL1 +SWITCH_LEFT LITERAL1 +SWITCH_UP LITERAL1 +SWITCH_RIGHT LITERAL1 +JOYSTICK_DOWN LITERAL1 +JOYSTICK_LEFT LITERAL1 +JOYSTICK_UP LITERAL1 +PRESSED LITERAL1 +RELEASED LITERAL1 +DEGREES_C LITERAL1 +DEGREES_F LITERAL1 +X_AXIS LITERAL1 +Y_AXIS LITERAL1 +Z_AXIS LITERAL1 diff --git a/libraries/Ethernet/Dhcp.cpp b/libraries/Ethernet/Dhcp.cpp new file mode 100644 index 0000000..56d5b69 --- /dev/null +++ b/libraries/Ethernet/Dhcp.cpp @@ -0,0 +1,480 @@ +// DHCP Library v0.3 - April 25, 2009
+// Author: Jordan Terrell - blog.jordanterrell.com
+
+#include "w5100.h"
+
+#include <string.h>
+#include <stdlib.h>
+#include "Dhcp.h"
+#include "Arduino.h"
+#include "util.h"
+
+int DhcpClass::beginWithDHCP(uint8_t *mac, unsigned long timeout, unsigned long responseTimeout)
+{
+ _dhcpLeaseTime=0;
+ _dhcpT1=0;
+ _dhcpT2=0;
+ _lastCheck=0;
+ _timeout = timeout;
+ _responseTimeout = responseTimeout;
+
+ // zero out _dhcpMacAddr
+ memset(_dhcpMacAddr, 0, 6);
+ reset_DHCP_lease();
+
+ memcpy((void*)_dhcpMacAddr, (void*)mac, 6);
+ _dhcp_state = STATE_DHCP_START;
+ return request_DHCP_lease();
+}
+
+void DhcpClass::reset_DHCP_lease(){
+ // zero out _dhcpSubnetMask, _dhcpGatewayIp, _dhcpLocalIp, _dhcpDhcpServerIp, _dhcpDnsServerIp
+ memset(_dhcpLocalIp, 0, 20);
+}
+
+//return:0 on error, 1 if request is sent and response is received
+int DhcpClass::request_DHCP_lease(){
+
+ uint8_t messageType = 0;
+
+
+
+ // Pick an initial transaction ID
+ _dhcpTransactionId = random(1UL, 2000UL);
+ _dhcpInitialTransactionId = _dhcpTransactionId;
+
+ _dhcpUdpSocket.stop();
+ if (_dhcpUdpSocket.begin(DHCP_CLIENT_PORT) == 0)
+ {
+ // Couldn't get a socket
+ return 0;
+ }
+
+ presend_DHCP();
+
+ int result = 0;
+
+ unsigned long startTime = millis();
+
+ while(_dhcp_state != STATE_DHCP_LEASED)
+ {
+ if(_dhcp_state == STATE_DHCP_START)
+ {
+ _dhcpTransactionId++;
+
+ send_DHCP_MESSAGE(DHCP_DISCOVER, ((millis() - startTime) / 1000));
+ _dhcp_state = STATE_DHCP_DISCOVER;
+ }
+ else if(_dhcp_state == STATE_DHCP_REREQUEST){
+ _dhcpTransactionId++;
+ send_DHCP_MESSAGE(DHCP_REQUEST, ((millis() - startTime)/1000));
+ _dhcp_state = STATE_DHCP_REQUEST;
+ }
+ else if(_dhcp_state == STATE_DHCP_DISCOVER)
+ {
+ uint32_t respId;
+ messageType = parseDHCPResponse(_responseTimeout, respId);
+ if(messageType == DHCP_OFFER)
+ {
+ // We'll use the transaction ID that the offer came with,
+ // rather than the one we were up to
+ _dhcpTransactionId = respId;
+ send_DHCP_MESSAGE(DHCP_REQUEST, ((millis() - startTime) / 1000));
+ _dhcp_state = STATE_DHCP_REQUEST;
+ }
+ }
+ else if(_dhcp_state == STATE_DHCP_REQUEST)
+ {
+ uint32_t respId;
+ messageType = parseDHCPResponse(_responseTimeout, respId);
+ if(messageType == DHCP_ACK)
+ {
+ _dhcp_state = STATE_DHCP_LEASED;
+ result = 1;
+ //use default lease time if we didn't get it
+ if(_dhcpLeaseTime == 0){
+ _dhcpLeaseTime = DEFAULT_LEASE;
+ }
+ //calculate T1 & T2 if we didn't get it
+ if(_dhcpT1 == 0){
+ //T1 should be 50% of _dhcpLeaseTime
+ _dhcpT1 = _dhcpLeaseTime >> 1;
+ }
+ if(_dhcpT2 == 0){
+ //T2 should be 87.5% (7/8ths) of _dhcpLeaseTime
+ _dhcpT2 = _dhcpT1 << 1;
+ }
+ _renewInSec = _dhcpT1;
+ _rebindInSec = _dhcpT2;
+ }
+ else if(messageType == DHCP_NAK)
+ _dhcp_state = STATE_DHCP_START;
+ }
+
+ if(messageType == 255)
+ {
+ messageType = 0;
+ _dhcp_state = STATE_DHCP_START;
+ }
+
+ if(result != 1 && ((millis() - startTime) > _timeout))
+ break;
+ }
+
+ // We're done with the socket now
+ _dhcpUdpSocket.stop();
+ _dhcpTransactionId++;
+
+ return result;
+}
+
+void DhcpClass::presend_DHCP()
+{
+}
+
+void DhcpClass::send_DHCP_MESSAGE(uint8_t messageType, uint16_t secondsElapsed)
+{
+ uint8_t buffer[32];
+ memset(buffer, 0, 32);
+ IPAddress dest_addr( 255, 255, 255, 255 ); // Broadcast address
+
+ if (-1 == _dhcpUdpSocket.beginPacket(dest_addr, DHCP_SERVER_PORT))
+ {
+ // FIXME Need to return errors
+ return;
+ }
+
+ buffer[0] = DHCP_BOOTREQUEST; // op
+ buffer[1] = DHCP_HTYPE10MB; // htype
+ buffer[2] = DHCP_HLENETHERNET; // hlen
+ buffer[3] = DHCP_HOPS; // hops
+
+ // xid
+ unsigned long xid = htonl(_dhcpTransactionId);
+ memcpy(buffer + 4, &(xid), 4);
+
+ // 8, 9 - seconds elapsed
+ buffer[8] = ((secondsElapsed & 0xff00) >> 8);
+ buffer[9] = (secondsElapsed & 0x00ff);
+
+ // flags
+ unsigned short flags = htons(DHCP_FLAGSBROADCAST);
+ memcpy(buffer + 10, &(flags), 2);
+
+ // ciaddr: already zeroed
+ // yiaddr: already zeroed
+ // siaddr: already zeroed
+ // giaddr: already zeroed
+
+ //put data in W5100 transmit buffer
+ _dhcpUdpSocket.write(buffer, 28);
+
+ memset(buffer, 0, 32); // clear local buffer
+
+ memcpy(buffer, _dhcpMacAddr, 6); // chaddr
+
+ //put data in W5100 transmit buffer
+ _dhcpUdpSocket.write(buffer, 16);
+
+ memset(buffer, 0, 32); // clear local buffer
+
+ // leave zeroed out for sname && file
+ // put in W5100 transmit buffer x 6 (192 bytes)
+
+ for(int i = 0; i < 6; i++) {
+ _dhcpUdpSocket.write(buffer, 32);
+ }
+
+ // OPT - Magic Cookie
+ buffer[0] = (uint8_t)((MAGIC_COOKIE >> 24)& 0xFF);
+ buffer[1] = (uint8_t)((MAGIC_COOKIE >> 16)& 0xFF);
+ buffer[2] = (uint8_t)((MAGIC_COOKIE >> 8)& 0xFF);
+ buffer[3] = (uint8_t)(MAGIC_COOKIE& 0xFF);
+
+ // OPT - message type
+ buffer[4] = dhcpMessageType;
+ buffer[5] = 0x01;
+ buffer[6] = messageType; //DHCP_REQUEST;
+
+ // OPT - client identifier
+ buffer[7] = dhcpClientIdentifier;
+ buffer[8] = 0x07;
+ buffer[9] = 0x01;
+ memcpy(buffer + 10, _dhcpMacAddr, 6);
+
+ // OPT - host name
+ buffer[16] = hostName;
+ buffer[17] = strlen(HOST_NAME) + 6; // length of hostname + last 3 bytes of mac address
+ strcpy((char*)&(buffer[18]), HOST_NAME);
+
+ printByte((char*)&(buffer[24]), _dhcpMacAddr[3]);
+ printByte((char*)&(buffer[26]), _dhcpMacAddr[4]);
+ printByte((char*)&(buffer[28]), _dhcpMacAddr[5]);
+
+ //put data in W5100 transmit buffer
+ _dhcpUdpSocket.write(buffer, 30);
+
+ if(messageType == DHCP_REQUEST)
+ {
+ buffer[0] = dhcpRequestedIPaddr;
+ buffer[1] = 0x04;
+ buffer[2] = _dhcpLocalIp[0];
+ buffer[3] = _dhcpLocalIp[1];
+ buffer[4] = _dhcpLocalIp[2];
+ buffer[5] = _dhcpLocalIp[3];
+
+ buffer[6] = dhcpServerIdentifier;
+ buffer[7] = 0x04;
+ buffer[8] = _dhcpDhcpServerIp[0];
+ buffer[9] = _dhcpDhcpServerIp[1];
+ buffer[10] = _dhcpDhcpServerIp[2];
+ buffer[11] = _dhcpDhcpServerIp[3];
+
+ //put data in W5100 transmit buffer
+ _dhcpUdpSocket.write(buffer, 12);
+ }
+
+ buffer[0] = dhcpParamRequest;
+ buffer[1] = 0x06;
+ buffer[2] = subnetMask;
+ buffer[3] = routersOnSubnet;
+ buffer[4] = dns;
+ buffer[5] = domainName;
+ buffer[6] = dhcpT1value;
+ buffer[7] = dhcpT2value;
+ buffer[8] = endOption;
+
+ //put data in W5100 transmit buffer
+ _dhcpUdpSocket.write(buffer, 9);
+
+ _dhcpUdpSocket.endPacket();
+}
+
+uint8_t DhcpClass::parseDHCPResponse(unsigned long responseTimeout, uint32_t& transactionId)
+{
+ uint8_t type = 0;
+ uint8_t opt_len = 0;
+
+ unsigned long startTime = millis();
+
+ while(_dhcpUdpSocket.parsePacket() <= 0)
+ {
+ if((millis() - startTime) > responseTimeout)
+ {
+ return 255;
+ }
+ delay(50);
+ }
+ // start reading in the packet
+ RIP_MSG_FIXED fixedMsg;
+ _dhcpUdpSocket.read((uint8_t*)&fixedMsg, sizeof(RIP_MSG_FIXED));
+
+ if(fixedMsg.op == DHCP_BOOTREPLY && _dhcpUdpSocket.remotePort() == DHCP_SERVER_PORT)
+ {
+ transactionId = ntohl(fixedMsg.xid);
+ if(memcmp(fixedMsg.chaddr, _dhcpMacAddr, 6) != 0 || (transactionId < _dhcpInitialTransactionId) || (transactionId > _dhcpTransactionId))
+ {
+ // Need to read the rest of the packet here regardless
+ _dhcpUdpSocket.flush();
+ return 0;
+ }
+
+ memcpy(_dhcpLocalIp, fixedMsg.yiaddr, 4);
+
+ // Skip to the option part
+ // Doing this a byte at a time so we don't have to put a big buffer
+ // on the stack (as we don't have lots of memory lying around)
+ for (int i =0; i < (240 - (int)sizeof(RIP_MSG_FIXED)); i++)
+ {
+ _dhcpUdpSocket.read(); // we don't care about the returned byte
+ }
+
+ while (_dhcpUdpSocket.available() > 0)
+ {
+ switch (_dhcpUdpSocket.read())
+ {
+ case endOption :
+ break;
+
+ case padOption :
+ break;
+
+ case dhcpMessageType :
+ opt_len = _dhcpUdpSocket.read();
+ type = _dhcpUdpSocket.read();
+ break;
+
+ case subnetMask :
+ opt_len = _dhcpUdpSocket.read();
+ _dhcpUdpSocket.read(_dhcpSubnetMask, 4);
+ break;
+
+ case routersOnSubnet :
+ opt_len = _dhcpUdpSocket.read();
+ _dhcpUdpSocket.read(_dhcpGatewayIp, 4);
+ for (int i = 0; i < opt_len-4; i++)
+ {
+ _dhcpUdpSocket.read();
+ }
+ break;
+
+ case dns :
+ opt_len = _dhcpUdpSocket.read();
+ _dhcpUdpSocket.read(_dhcpDnsServerIp, 4);
+ for (int i = 0; i < opt_len-4; i++)
+ {
+ _dhcpUdpSocket.read();
+ }
+ break;
+
+ case dhcpServerIdentifier :
+ opt_len = _dhcpUdpSocket.read();
+ if( *((uint32_t*)_dhcpDhcpServerIp) == 0 ||
+ IPAddress(_dhcpDhcpServerIp) == _dhcpUdpSocket.remoteIP() )
+ {
+ _dhcpUdpSocket.read(_dhcpDhcpServerIp, sizeof(_dhcpDhcpServerIp));
+ }
+ else
+ {
+ // Skip over the rest of this option
+ while (opt_len--)
+ {
+ _dhcpUdpSocket.read();
+ }
+ }
+ break;
+
+ case dhcpT1value :
+ opt_len = _dhcpUdpSocket.read();
+ _dhcpUdpSocket.read((uint8_t*)&_dhcpT1, sizeof(_dhcpT1));
+ _dhcpT1 = ntohl(_dhcpT1);
+ break;
+
+ case dhcpT2value :
+ opt_len = _dhcpUdpSocket.read();
+ _dhcpUdpSocket.read((uint8_t*)&_dhcpT2, sizeof(_dhcpT2));
+ _dhcpT2 = ntohl(_dhcpT2);
+ break;
+
+ case dhcpIPaddrLeaseTime :
+ opt_len = _dhcpUdpSocket.read();
+ _dhcpUdpSocket.read((uint8_t*)&_dhcpLeaseTime, sizeof(_dhcpLeaseTime));
+ _dhcpLeaseTime = ntohl(_dhcpLeaseTime);
+ _renewInSec = _dhcpLeaseTime;
+ break;
+
+ default :
+ opt_len = _dhcpUdpSocket.read();
+ // Skip over the rest of this option
+ while (opt_len--)
+ {
+ _dhcpUdpSocket.read();
+ }
+ break;
+ }
+ }
+ }
+
+ // Need to skip to end of the packet regardless here
+ _dhcpUdpSocket.flush();
+
+ return type;
+}
+
+
+/*
+ returns:
+ 0/DHCP_CHECK_NONE: nothing happened
+ 1/DHCP_CHECK_RENEW_FAIL: renew failed
+ 2/DHCP_CHECK_RENEW_OK: renew success
+ 3/DHCP_CHECK_REBIND_FAIL: rebind fail
+ 4/DHCP_CHECK_REBIND_OK: rebind success
+*/
+int DhcpClass::checkLease(){
+ //this uses a signed / unsigned trick to deal with millis overflow
+ unsigned long now = millis();
+ signed long snow = (long)now;
+ int rc=DHCP_CHECK_NONE;
+ if (_lastCheck != 0){
+ signed long factor;
+ //calc how many ms past the timeout we are
+ factor = snow - (long)_secTimeout;
+ //if on or passed the timeout, reduce the counters
+ if ( factor >= 0 ){
+ //next timeout should be now plus 1000 ms minus parts of second in factor
+ _secTimeout = snow + 1000 - factor % 1000;
+ //how many seconds late are we, minimum 1
+ factor = factor / 1000 +1;
+
+ //reduce the counters by that mouch
+ //if we can assume that the cycle time (factor) is fairly constant
+ //and if the remainder is less than cycle time * 2
+ //do it early instead of late
+ if(_renewInSec < factor*2 )
+ _renewInSec = 0;
+ else
+ _renewInSec -= factor;
+
+ if(_rebindInSec < factor*2 )
+ _rebindInSec = 0;
+ else
+ _rebindInSec -= factor;
+ }
+
+ //if we have a lease but should renew, do it
+ if (_dhcp_state == STATE_DHCP_LEASED && _renewInSec <=0){
+ _dhcp_state = STATE_DHCP_REREQUEST;
+ rc = 1 + request_DHCP_lease();
+ }
+
+ //if we have a lease or is renewing but should bind, do it
+ if( (_dhcp_state == STATE_DHCP_LEASED || _dhcp_state == STATE_DHCP_START) && _rebindInSec <=0){
+ //this should basically restart completely
+ _dhcp_state = STATE_DHCP_START;
+ reset_DHCP_lease();
+ rc = 3 + request_DHCP_lease();
+ }
+ }
+ else{
+ _secTimeout = snow + 1000;
+ }
+
+ _lastCheck = now;
+ return rc;
+}
+
+IPAddress DhcpClass::getLocalIp()
+{
+ return IPAddress(_dhcpLocalIp);
+}
+
+IPAddress DhcpClass::getSubnetMask()
+{
+ return IPAddress(_dhcpSubnetMask);
+}
+
+IPAddress DhcpClass::getGatewayIp()
+{
+ return IPAddress(_dhcpGatewayIp);
+}
+
+IPAddress DhcpClass::getDhcpServerIp()
+{
+ return IPAddress(_dhcpDhcpServerIp);
+}
+
+IPAddress DhcpClass::getDnsServerIp()
+{
+ return IPAddress(_dhcpDnsServerIp);
+}
+
+void DhcpClass::printByte(char * buf, uint8_t n ) {
+ char *str = &buf[1];
+ buf[0]='0';
+ do {
+ unsigned long m = n;
+ n /= 16;
+ char c = m - 16 * n;
+ *str-- = c < 10 ? c + '0' : c + 'A' - 10;
+ } while(n);
+}
diff --git a/libraries/Ethernet/Dhcp.h b/libraries/Ethernet/Dhcp.h new file mode 100644 index 0000000..4a47936 --- /dev/null +++ b/libraries/Ethernet/Dhcp.h @@ -0,0 +1,178 @@ +// DHCP Library v0.3 - April 25, 2009
+// Author: Jordan Terrell - blog.jordanterrell.com
+
+#ifndef Dhcp_h
+#define Dhcp_h
+
+#include "EthernetUdp.h"
+
+/* DHCP state machine. */
+#define STATE_DHCP_START 0
+#define STATE_DHCP_DISCOVER 1
+#define STATE_DHCP_REQUEST 2
+#define STATE_DHCP_LEASED 3
+#define STATE_DHCP_REREQUEST 4
+#define STATE_DHCP_RELEASE 5
+
+#define DHCP_FLAGSBROADCAST 0x8000
+
+/* UDP port numbers for DHCP */
+#define DHCP_SERVER_PORT 67 /* from server to client */
+#define DHCP_CLIENT_PORT 68 /* from client to server */
+
+/* DHCP message OP code */
+#define DHCP_BOOTREQUEST 1
+#define DHCP_BOOTREPLY 2
+
+/* DHCP message type */
+#define DHCP_DISCOVER 1
+#define DHCP_OFFER 2
+#define DHCP_REQUEST 3
+#define DHCP_DECLINE 4
+#define DHCP_ACK 5
+#define DHCP_NAK 6
+#define DHCP_RELEASE 7
+#define DHCP_INFORM 8
+
+#define DHCP_HTYPE10MB 1
+#define DHCP_HTYPE100MB 2
+
+#define DHCP_HLENETHERNET 6
+#define DHCP_HOPS 0
+#define DHCP_SECS 0
+
+#define MAGIC_COOKIE 0x63825363
+#define MAX_DHCP_OPT 16
+
+#define HOST_NAME "WIZnet"
+#define DEFAULT_LEASE (900) //default lease time in seconds
+
+#define DHCP_CHECK_NONE (0)
+#define DHCP_CHECK_RENEW_FAIL (1)
+#define DHCP_CHECK_RENEW_OK (2)
+#define DHCP_CHECK_REBIND_FAIL (3)
+#define DHCP_CHECK_REBIND_OK (4)
+
+enum
+{
+ padOption = 0,
+ subnetMask = 1,
+ timerOffset = 2,
+ routersOnSubnet = 3,
+ /* timeServer = 4,
+ nameServer = 5,*/
+ dns = 6,
+ /*logServer = 7,
+ cookieServer = 8,
+ lprServer = 9,
+ impressServer = 10,
+ resourceLocationServer = 11,*/
+ hostName = 12,
+ /*bootFileSize = 13,
+ meritDumpFile = 14,*/
+ domainName = 15,
+ /*swapServer = 16,
+ rootPath = 17,
+ extentionsPath = 18,
+ IPforwarding = 19,
+ nonLocalSourceRouting = 20,
+ policyFilter = 21,
+ maxDgramReasmSize = 22,
+ defaultIPTTL = 23,
+ pathMTUagingTimeout = 24,
+ pathMTUplateauTable = 25,
+ ifMTU = 26,
+ allSubnetsLocal = 27,
+ broadcastAddr = 28,
+ performMaskDiscovery = 29,
+ maskSupplier = 30,
+ performRouterDiscovery = 31,
+ routerSolicitationAddr = 32,
+ staticRoute = 33,
+ trailerEncapsulation = 34,
+ arpCacheTimeout = 35,
+ ethernetEncapsulation = 36,
+ tcpDefaultTTL = 37,
+ tcpKeepaliveInterval = 38,
+ tcpKeepaliveGarbage = 39,
+ nisDomainName = 40,
+ nisServers = 41,
+ ntpServers = 42,
+ vendorSpecificInfo = 43,
+ netBIOSnameServer = 44,
+ netBIOSdgramDistServer = 45,
+ netBIOSnodeType = 46,
+ netBIOSscope = 47,
+ xFontServer = 48,
+ xDisplayManager = 49,*/
+ dhcpRequestedIPaddr = 50,
+ dhcpIPaddrLeaseTime = 51,
+ /*dhcpOptionOverload = 52,*/
+ dhcpMessageType = 53,
+ dhcpServerIdentifier = 54,
+ dhcpParamRequest = 55,
+ /*dhcpMsg = 56,
+ dhcpMaxMsgSize = 57,*/
+ dhcpT1value = 58,
+ dhcpT2value = 59,
+ /*dhcpClassIdentifier = 60,*/
+ dhcpClientIdentifier = 61,
+ endOption = 255
+};
+
+typedef struct _RIP_MSG_FIXED
+{
+ uint8_t op;
+ uint8_t htype;
+ uint8_t hlen;
+ uint8_t hops;
+ uint32_t xid;
+ uint16_t secs;
+ uint16_t flags;
+ uint8_t ciaddr[4];
+ uint8_t yiaddr[4];
+ uint8_t siaddr[4];
+ uint8_t giaddr[4];
+ uint8_t chaddr[6];
+}RIP_MSG_FIXED;
+
+class DhcpClass {
+private:
+ uint32_t _dhcpInitialTransactionId;
+ uint32_t _dhcpTransactionId;
+ uint8_t _dhcpMacAddr[6];
+ uint8_t _dhcpLocalIp[4];
+ uint8_t _dhcpSubnetMask[4];
+ uint8_t _dhcpGatewayIp[4];
+ uint8_t _dhcpDhcpServerIp[4];
+ uint8_t _dhcpDnsServerIp[4];
+ uint32_t _dhcpLeaseTime;
+ uint32_t _dhcpT1, _dhcpT2;
+ signed long _renewInSec;
+ signed long _rebindInSec;
+ signed long _lastCheck;
+ unsigned long _timeout;
+ unsigned long _responseTimeout;
+ unsigned long _secTimeout;
+ uint8_t _dhcp_state;
+ EthernetUDP _dhcpUdpSocket;
+
+ int request_DHCP_lease();
+ void reset_DHCP_lease();
+ void presend_DHCP();
+ void send_DHCP_MESSAGE(uint8_t, uint16_t);
+ void printByte(char *, uint8_t);
+
+ uint8_t parseDHCPResponse(unsigned long responseTimeout, uint32_t& transactionId);
+public:
+ IPAddress getLocalIp();
+ IPAddress getSubnetMask();
+ IPAddress getGatewayIp();
+ IPAddress getDhcpServerIp();
+ IPAddress getDnsServerIp();
+
+ int beginWithDHCP(uint8_t *, unsigned long timeout = 60000, unsigned long responseTimeout = 4000);
+ int checkLease();
+};
+
+#endif
diff --git a/libraries/Ethernet/Dns.cpp b/libraries/Ethernet/Dns.cpp new file mode 100644 index 0000000..b3c1a9d --- /dev/null +++ b/libraries/Ethernet/Dns.cpp @@ -0,0 +1,423 @@ +// Arduino DNS client for WizNet5100-based Ethernet shield +// (c) Copyright 2009-2010 MCQN Ltd. +// Released under Apache License, version 2.0 + +#include "w5100.h" +#include "EthernetUdp.h" +#include "util.h" + +#include "Dns.h" +#include <string.h> +//#include <stdlib.h> +#include "Arduino.h" + + +#define SOCKET_NONE 255 +// Various flags and header field values for a DNS message +#define UDP_HEADER_SIZE 8 +#define DNS_HEADER_SIZE 12 +#define TTL_SIZE 4 +#define QUERY_FLAG (0) +#define RESPONSE_FLAG (1<<15) +#define QUERY_RESPONSE_MASK (1<<15) +#define OPCODE_STANDARD_QUERY (0) +#define OPCODE_INVERSE_QUERY (1<<11) +#define OPCODE_STATUS_REQUEST (2<<11) +#define OPCODE_MASK (15<<11) +#define AUTHORITATIVE_FLAG (1<<10) +#define TRUNCATION_FLAG (1<<9) +#define RECURSION_DESIRED_FLAG (1<<8) +#define RECURSION_AVAILABLE_FLAG (1<<7) +#define RESP_NO_ERROR (0) +#define RESP_FORMAT_ERROR (1) +#define RESP_SERVER_FAILURE (2) +#define RESP_NAME_ERROR (3) +#define RESP_NOT_IMPLEMENTED (4) +#define RESP_REFUSED (5) +#define RESP_MASK (15) +#define TYPE_A (0x0001) +#define CLASS_IN (0x0001) +#define LABEL_COMPRESSION_MASK (0xC0) +// Port number that DNS servers listen on +#define DNS_PORT 53 + +// Possible return codes from ProcessResponse +#define SUCCESS 1 +#define TIMED_OUT -1 +#define INVALID_SERVER -2 +#define TRUNCATED -3 +#define INVALID_RESPONSE -4 + +void DNSClient::begin(const IPAddress& aDNSServer) +{ + iDNSServer = aDNSServer; + iRequestId = 0; +} + + +int DNSClient::inet_aton(const char* aIPAddrString, IPAddress& aResult) +{ + // See if we've been given a valid IP address + const char* p =aIPAddrString; + while (*p && + ( (*p == '.') || (*p >= '0') || (*p <= '9') )) + { + p++; + } + + if (*p == '\0') + { + // It's looking promising, we haven't found any invalid characters + p = aIPAddrString; + int segment =0; + int segmentValue =0; + while (*p && (segment < 4)) + { + if (*p == '.') + { + // We've reached the end of a segment + if (segmentValue > 255) + { + // You can't have IP address segments that don't fit in a byte + return 0; + } + else + { + aResult[segment] = (byte)segmentValue; + segment++; + segmentValue = 0; + } + } + else + { + // Next digit + segmentValue = (segmentValue*10)+(*p - '0'); + } + p++; + } + // We've reached the end of address, but there'll still be the last + // segment to deal with + if ((segmentValue > 255) || (segment > 3)) + { + // You can't have IP address segments that don't fit in a byte, + // or more than four segments + return 0; + } + else + { + aResult[segment] = (byte)segmentValue; + return 1; + } + } + else + { + return 0; + } +} + +int DNSClient::getHostByName(const char* aHostname, IPAddress& aResult) +{ + int ret =0; + + // See if it's a numeric IP address + if (inet_aton(aHostname, aResult)) + { + // It is, our work here is done + return 1; + } + + // Check we've got a valid DNS server to use + if (iDNSServer == INADDR_NONE) + { + return INVALID_SERVER; + } + + // Find a socket to use + if (iUdp.begin(1024+(millis() & 0xF)) == 1) + { + // Try up to three times + int retries = 0; +// while ((retries < 3) && (ret <= 0)) + { + // Send DNS request + ret = iUdp.beginPacket(iDNSServer, DNS_PORT); + if (ret != 0) + { + // Now output the request data + ret = BuildRequest(aHostname); + if (ret != 0) + { + // And finally send the request + ret = iUdp.endPacket(); + if (ret != 0) + { + // Now wait for a response + int wait_retries = 0; + ret = TIMED_OUT; + while ((wait_retries < 3) && (ret == TIMED_OUT)) + { + ret = ProcessResponse(5000, aResult); + wait_retries++; + } + } + } + } + retries++; + } + + // We're done with the socket now + iUdp.stop(); + } + + return ret; +} + +uint16_t DNSClient::BuildRequest(const char* aName) +{ + // Build header + // 1 1 1 1 1 1 + // 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 + // +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + // | ID | + // +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + // |QR| Opcode |AA|TC|RD|RA| Z | RCODE | + // +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + // | QDCOUNT | + // +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + // | ANCOUNT | + // +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + // | NSCOUNT | + // +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + // | ARCOUNT | + // +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + // As we only support one request at a time at present, we can simplify + // some of this header + iRequestId = millis(); // generate a random ID + uint16_t twoByteBuffer; + + // FIXME We should also check that there's enough space available to write to, rather + // FIXME than assume there's enough space (as the code does at present) + iUdp.write((uint8_t*)&iRequestId, sizeof(iRequestId)); + + twoByteBuffer = htons(QUERY_FLAG | OPCODE_STANDARD_QUERY | RECURSION_DESIRED_FLAG); + iUdp.write((uint8_t*)&twoByteBuffer, sizeof(twoByteBuffer)); + + twoByteBuffer = htons(1); // One question record + iUdp.write((uint8_t*)&twoByteBuffer, sizeof(twoByteBuffer)); + + twoByteBuffer = 0; // Zero answer records + iUdp.write((uint8_t*)&twoByteBuffer, sizeof(twoByteBuffer)); + + iUdp.write((uint8_t*)&twoByteBuffer, sizeof(twoByteBuffer)); + // and zero additional records + iUdp.write((uint8_t*)&twoByteBuffer, sizeof(twoByteBuffer)); + + // Build question + const char* start =aName; + const char* end =start; + uint8_t len; + // Run through the name being requested + while (*end) + { + // Find out how long this section of the name is + end = start; + while (*end && (*end != '.') ) + { + end++; + } + + if (end-start > 0) + { + // Write out the size of this section + len = end-start; + iUdp.write(&len, sizeof(len)); + // And then write out the section + iUdp.write((uint8_t*)start, end-start); + } + start = end+1; + } + + // We've got to the end of the question name, so + // terminate it with a zero-length section + len = 0; + iUdp.write(&len, sizeof(len)); + // Finally the type and class of question + twoByteBuffer = htons(TYPE_A); + iUdp.write((uint8_t*)&twoByteBuffer, sizeof(twoByteBuffer)); + + twoByteBuffer = htons(CLASS_IN); // Internet class of question + iUdp.write((uint8_t*)&twoByteBuffer, sizeof(twoByteBuffer)); + // Success! Everything buffered okay + return 1; +} + + +uint16_t DNSClient::ProcessResponse(uint16_t aTimeout, IPAddress& aAddress) +{ + uint32_t startTime = millis(); + + // Wait for a response packet + while(iUdp.parsePacket() <= 0) + { + if((millis() - startTime) > aTimeout) + return TIMED_OUT; + delay(50); + } + + // We've had a reply! + // Read the UDP header + uint8_t header[DNS_HEADER_SIZE]; // Enough space to reuse for the DNS header + // Check that it's a response from the right server and the right port + if ( (iDNSServer != iUdp.remoteIP()) || + (iUdp.remotePort() != DNS_PORT) ) + { + // It's not from who we expected + return INVALID_SERVER; + } + + // Read through the rest of the response + if (iUdp.available() < DNS_HEADER_SIZE) + { + return TRUNCATED; + } + iUdp.read(header, DNS_HEADER_SIZE); + + uint16_t header_flags = htons(*((uint16_t*)&header[2])); + // Check that it's a response to this request + if ( ( iRequestId != (*((uint16_t*)&header[0])) ) || + ((header_flags & QUERY_RESPONSE_MASK) != (uint16_t)RESPONSE_FLAG) ) + { + // Mark the entire packet as read + iUdp.flush(); + return INVALID_RESPONSE; + } + // Check for any errors in the response (or in our request) + // although we don't do anything to get round these + if ( (header_flags & TRUNCATION_FLAG) || (header_flags & RESP_MASK) ) + { + // Mark the entire packet as read + iUdp.flush(); + return -5; //INVALID_RESPONSE; + } + + // And make sure we've got (at least) one answer + uint16_t answerCount = htons(*((uint16_t*)&header[6])); + if (answerCount == 0 ) + { + // Mark the entire packet as read + iUdp.flush(); + return -6; //INVALID_RESPONSE; + } + + // Skip over any questions + for (uint16_t i =0; i < htons(*((uint16_t*)&header[4])); i++) + { + // Skip over the name + uint8_t len; + do + { + iUdp.read(&len, sizeof(len)); + if (len > 0) + { + // Don't need to actually read the data out for the string, just + // advance ptr to beyond it + while(len--) + { + iUdp.read(); // we don't care about the returned byte + } + } + } while (len != 0); + + // Now jump over the type and class + for (int i =0; i < 4; i++) + { + iUdp.read(); // we don't care about the returned byte + } + } + + // Now we're up to the bit we're interested in, the answer + // There might be more than one answer (although we'll just use the first + // type A answer) and some authority and additional resource records but + // we're going to ignore all of them. + + for (uint16_t i =0; i < answerCount; i++) + { + // Skip the name + uint8_t len; + do + { + iUdp.read(&len, sizeof(len)); + if ((len & LABEL_COMPRESSION_MASK) == 0) + { + // It's just a normal label + if (len > 0) + { + // And it's got a length + // Don't need to actually read the data out for the string, + // just advance ptr to beyond it + while(len--) + { + iUdp.read(); // we don't care about the returned byte + } + } + } + else + { + // This is a pointer to a somewhere else in the message for the + // rest of the name. We don't care about the name, and RFC1035 + // says that a name is either a sequence of labels ended with a + // 0 length octet or a pointer or a sequence of labels ending in + // a pointer. Either way, when we get here we're at the end of + // the name + // Skip over the pointer + iUdp.read(); // we don't care about the returned byte + // And set len so that we drop out of the name loop + len = 0; + } + } while (len != 0); + + // Check the type and class + uint16_t answerType; + uint16_t answerClass; + iUdp.read((uint8_t*)&answerType, sizeof(answerType)); + iUdp.read((uint8_t*)&answerClass, sizeof(answerClass)); + + // Ignore the Time-To-Live as we don't do any caching + for (int i =0; i < TTL_SIZE; i++) + { + iUdp.read(); // we don't care about the returned byte + } + + // And read out the length of this answer + // Don't need header_flags anymore, so we can reuse it here + iUdp.read((uint8_t*)&header_flags, sizeof(header_flags)); + + if ( (htons(answerType) == TYPE_A) && (htons(answerClass) == CLASS_IN) ) + { + if (htons(header_flags) != 4) + { + // It's a weird size + // Mark the entire packet as read + iUdp.flush(); + return -9;//INVALID_RESPONSE; + } + iUdp.read(aAddress.raw_address(), 4); + return SUCCESS; + } + else + { + // This isn't an answer type we're after, move onto the next one + for (uint16_t i =0; i < htons(header_flags); i++) + { + iUdp.read(); // we don't care about the returned byte + } + } + } + + // Mark the entire packet as read + iUdp.flush(); + + // If we get here then we haven't found an answer + return -10;//INVALID_RESPONSE; +} + diff --git a/libraries/Ethernet/Dns.h b/libraries/Ethernet/Dns.h new file mode 100644 index 0000000..6bcb98a --- /dev/null +++ b/libraries/Ethernet/Dns.h @@ -0,0 +1,41 @@ +// Arduino DNS client for WizNet5100-based Ethernet shield
+// (c) Copyright 2009-2010 MCQN Ltd.
+// Released under Apache License, version 2.0
+
+#ifndef DNSClient_h
+#define DNSClient_h
+
+#include <EthernetUdp.h>
+
+class DNSClient
+{
+public:
+ // ctor
+ void begin(const IPAddress& aDNSServer);
+
+ /** Convert a numeric IP address string into a four-byte IP address.
+ @param aIPAddrString IP address to convert
+ @param aResult IPAddress structure to store the returned IP address
+ @result 1 if aIPAddrString was successfully converted to an IP address,
+ else error code
+ */
+ int inet_aton(const char *aIPAddrString, IPAddress& aResult);
+
+ /** Resolve the given hostname to an IP address.
+ @param aHostname Name to be resolved
+ @param aResult IPAddress structure to store the returned IP address
+ @result 1 if aIPAddrString was successfully converted to an IP address,
+ else error code
+ */
+ int getHostByName(const char* aHostname, IPAddress& aResult);
+
+protected:
+ uint16_t BuildRequest(const char* aName);
+ uint16_t ProcessResponse(uint16_t aTimeout, IPAddress& aAddress);
+
+ IPAddress iDNSServer;
+ uint16_t iRequestId;
+ EthernetUDP iUdp;
+};
+
+#endif
diff --git a/libraries/Ethernet/Ethernet.cpp b/libraries/Ethernet/Ethernet.cpp new file mode 100644 index 0000000..c31a85f --- /dev/null +++ b/libraries/Ethernet/Ethernet.cpp @@ -0,0 +1,122 @@ +#include "w5100.h" +#include "Ethernet.h" +#include "Dhcp.h" + +// XXX: don't make assumptions about the value of MAX_SOCK_NUM. +uint8_t EthernetClass::_state[MAX_SOCK_NUM] = { + 0, 0, 0, 0 }; +uint16_t EthernetClass::_server_port[MAX_SOCK_NUM] = { + 0, 0, 0, 0 }; + +int EthernetClass::begin(uint8_t *mac_address) +{ + static DhcpClass s_dhcp; + _dhcp = &s_dhcp; + + + // Initialise the basic info + W5100.init(); + W5100.setMACAddress(mac_address); + W5100.setIPAddress(IPAddress(0,0,0,0).raw_address()); + + // Now try to get our config info from a DHCP server + int ret = _dhcp->beginWithDHCP(mac_address); + if(ret == 1) + { + // We've successfully found a DHCP server and got our configuration info, so set things + // accordingly + W5100.setIPAddress(_dhcp->getLocalIp().raw_address()); + W5100.setGatewayIp(_dhcp->getGatewayIp().raw_address()); + W5100.setSubnetMask(_dhcp->getSubnetMask().raw_address()); + _dnsServerAddress = _dhcp->getDnsServerIp(); + } + + return ret; +} + +void EthernetClass::begin(uint8_t *mac_address, IPAddress local_ip) +{ + // Assume the DNS server will be the machine on the same network as the local IP + // but with last octet being '1' + IPAddress dns_server = local_ip; + dns_server[3] = 1; + begin(mac_address, local_ip, dns_server); +} + +void EthernetClass::begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server) +{ + // Assume the gateway will be the machine on the same network as the local IP + // but with last octet being '1' + IPAddress gateway = local_ip; + gateway[3] = 1; + begin(mac_address, local_ip, dns_server, gateway); +} + +void EthernetClass::begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway) +{ + IPAddress subnet(255, 255, 255, 0); + begin(mac_address, local_ip, dns_server, gateway, subnet); +} + +void EthernetClass::begin(uint8_t *mac, IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet) +{ + W5100.init(); + W5100.setMACAddress(mac); + W5100.setIPAddress(local_ip._address); + W5100.setGatewayIp(gateway._address); + W5100.setSubnetMask(subnet._address); + _dnsServerAddress = dns_server; +} + +int EthernetClass::maintain(){ + int rc = DHCP_CHECK_NONE; + if(_dhcp != NULL){ + //we have a pointer to dhcp, use it + rc = _dhcp->checkLease(); + switch ( rc ){ + case DHCP_CHECK_NONE: + //nothing done + break; + case DHCP_CHECK_RENEW_OK: + case DHCP_CHECK_REBIND_OK: + //we might have got a new IP. + W5100.setIPAddress(_dhcp->getLocalIp().raw_address()); + W5100.setGatewayIp(_dhcp->getGatewayIp().raw_address()); + W5100.setSubnetMask(_dhcp->getSubnetMask().raw_address()); + _dnsServerAddress = _dhcp->getDnsServerIp(); + break; + default: + //this is actually a error, it will retry though + break; + } + } + return rc; +} + +IPAddress EthernetClass::localIP() +{ + IPAddress ret; + W5100.getIPAddress(ret.raw_address()); + return ret; +} + +IPAddress EthernetClass::subnetMask() +{ + IPAddress ret; + W5100.getSubnetMask(ret.raw_address()); + return ret; +} + +IPAddress EthernetClass::gatewayIP() +{ + IPAddress ret; + W5100.getGatewayIp(ret.raw_address()); + return ret; +} + +IPAddress EthernetClass::dnsServerIP() +{ + return _dnsServerAddress; +} + +EthernetClass Ethernet; diff --git a/libraries/Ethernet/Ethernet.h b/libraries/Ethernet/Ethernet.h new file mode 100644 index 0000000..2a07ff3 --- /dev/null +++ b/libraries/Ethernet/Ethernet.h @@ -0,0 +1,41 @@ +#ifndef ethernet_h +#define ethernet_h + +#include <inttypes.h> +//#include "w5100.h" +#include "IPAddress.h" +#include "EthernetClient.h" +#include "EthernetServer.h" +#include "Dhcp.h" + +#define MAX_SOCK_NUM 4 + +class EthernetClass { +private: + IPAddress _dnsServerAddress; + DhcpClass* _dhcp; +public: + static uint8_t _state[MAX_SOCK_NUM]; + static uint16_t _server_port[MAX_SOCK_NUM]; + // Initialise the Ethernet shield to use the provided MAC address and gain the rest of the + // configuration through DHCP. + // Returns 0 if the DHCP configuration failed, and 1 if it succeeded + int begin(uint8_t *mac_address); + void begin(uint8_t *mac_address, IPAddress local_ip); + void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server); + void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway); + void begin(uint8_t *mac_address, IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); + int maintain(); + + IPAddress localIP(); + IPAddress subnetMask(); + IPAddress gatewayIP(); + IPAddress dnsServerIP(); + + friend class EthernetClient; + friend class EthernetServer; +}; + +extern EthernetClass Ethernet; + +#endif diff --git a/libraries/Ethernet/EthernetClient.cpp b/libraries/Ethernet/EthernetClient.cpp new file mode 100644 index 0000000..9885efb --- /dev/null +++ b/libraries/Ethernet/EthernetClient.cpp @@ -0,0 +1,165 @@ +#include "w5100.h" +#include "socket.h" + +extern "C" { + #include "string.h" +} + +#include "Arduino.h" + +#include "Ethernet.h" +#include "EthernetClient.h" +#include "EthernetServer.h" +#include "Dns.h" + +uint16_t EthernetClient::_srcport = 1024; + +EthernetClient::EthernetClient() : _sock(MAX_SOCK_NUM) { +} + +EthernetClient::EthernetClient(uint8_t sock) : _sock(sock) { +} + +int EthernetClient::connect(const char* host, uint16_t port) { + // Look up the host first + int ret = 0; + DNSClient dns; + IPAddress remote_addr; + + dns.begin(Ethernet.dnsServerIP()); + ret = dns.getHostByName(host, remote_addr); + if (ret == 1) { + return connect(remote_addr, port); + } else { + return ret; + } +} + +int EthernetClient::connect(IPAddress ip, uint16_t port) { + if (_sock != MAX_SOCK_NUM) + return 0; + + for (int i = 0; i < MAX_SOCK_NUM; i++) { + uint8_t s = W5100.readSnSR(i); + if (s == SnSR::CLOSED || s == SnSR::FIN_WAIT || s == SnSR::CLOSE_WAIT) { + _sock = i; + break; + } + } + + if (_sock == MAX_SOCK_NUM) + return 0; + + _srcport++; + if (_srcport == 0) _srcport = 1024; + socket(_sock, SnMR::TCP, _srcport, 0); + + if (!::connect(_sock, rawIPAddress(ip), port)) { + _sock = MAX_SOCK_NUM; + return 0; + } + + while (status() != SnSR::ESTABLISHED) { + delay(1); + if (status() == SnSR::CLOSED) { + _sock = MAX_SOCK_NUM; + return 0; + } + } + + return 1; +} + +size_t EthernetClient::write(uint8_t b) { + return write(&b, 1); +} + +size_t EthernetClient::write(const uint8_t *buf, size_t size) { + if (_sock == MAX_SOCK_NUM) { + setWriteError(); + return 0; + } + if (!send(_sock, buf, size)) { + setWriteError(); + return 0; + } + return size; +} + +int EthernetClient::available() { + if (_sock != MAX_SOCK_NUM) + return W5100.getRXReceivedSize(_sock); + return 0; +} + +int EthernetClient::read() { + uint8_t b; + if ( recv(_sock, &b, 1) > 0 ) + { + // recv worked + return b; + } + else + { + // No data available + return -1; + } +} + +int EthernetClient::read(uint8_t *buf, size_t size) { + return recv(_sock, buf, size); +} + +int EthernetClient::peek() { + uint8_t b; + // Unlike recv, peek doesn't check to see if there's any data available, so we must + if (!available()) + return -1; + ::peek(_sock, &b); + return b; +} + +void EthernetClient::flush() { + while (available()) + read(); +} + +void EthernetClient::stop() { + if (_sock == MAX_SOCK_NUM) + return; + + // attempt to close the connection gracefully (send a FIN to other side) + disconnect(_sock); + unsigned long start = millis(); + + // wait a second for the connection to close + while (status() != SnSR::CLOSED && millis() - start < 1000) + delay(1); + + // if it hasn't closed, close it forcefully + if (status() != SnSR::CLOSED) + close(_sock); + + EthernetClass::_server_port[_sock] = 0; + _sock = MAX_SOCK_NUM; +} + +uint8_t EthernetClient::connected() { + if (_sock == MAX_SOCK_NUM) return 0; + + uint8_t s = status(); + return !(s == SnSR::LISTEN || s == SnSR::CLOSED || s == SnSR::FIN_WAIT || + (s == SnSR::CLOSE_WAIT && !available())); +} + +uint8_t EthernetClient::status() { + if (_sock == MAX_SOCK_NUM) return SnSR::CLOSED; + return W5100.readSnSR(_sock); +} + +// the next function allows us to use the client returned by +// EthernetServer::available() as the condition in an if-statement. + +EthernetClient::operator bool() { + return _sock != MAX_SOCK_NUM; +} diff --git a/libraries/Ethernet/EthernetClient.h b/libraries/Ethernet/EthernetClient.h new file mode 100644 index 0000000..44740fe --- /dev/null +++ b/libraries/Ethernet/EthernetClient.h @@ -0,0 +1,37 @@ +#ifndef ethernetclient_h +#define ethernetclient_h +#include "Arduino.h" +#include "Print.h" +#include "Client.h" +#include "IPAddress.h" + +class EthernetClient : public Client { + +public: + EthernetClient(); + EthernetClient(uint8_t sock); + + uint8_t status(); + virtual int connect(IPAddress ip, uint16_t port); + virtual int connect(const char *host, uint16_t port); + virtual size_t write(uint8_t); + virtual size_t write(const uint8_t *buf, size_t size); + virtual int available(); + virtual int read(); + virtual int read(uint8_t *buf, size_t size); + virtual int peek(); + virtual void flush(); + virtual void stop(); + virtual uint8_t connected(); + virtual operator bool(); + + friend class EthernetServer; + + using Print::write; + +private: + static uint16_t _srcport; + uint8_t _sock; +}; + +#endif diff --git a/libraries/Ethernet/EthernetServer.cpp b/libraries/Ethernet/EthernetServer.cpp new file mode 100644 index 0000000..0308b92 --- /dev/null +++ b/libraries/Ethernet/EthernetServer.cpp @@ -0,0 +1,91 @@ +#include "w5100.h" +#include "socket.h" +extern "C" { +#include "string.h" +} + +#include "Ethernet.h" +#include "EthernetClient.h" +#include "EthernetServer.h" + +EthernetServer::EthernetServer(uint16_t port) +{ + _port = port; +} + +void EthernetServer::begin() +{ + for (int sock = 0; sock < MAX_SOCK_NUM; sock++) { + EthernetClient client(sock); + if (client.status() == SnSR::CLOSED) { + socket(sock, SnMR::TCP, _port, 0); + listen(sock); + EthernetClass::_server_port[sock] = _port; + break; + } + } +} + +void EthernetServer::accept() +{ + int listening = 0; + + for (int sock = 0; sock < MAX_SOCK_NUM; sock++) { + EthernetClient client(sock); + + if (EthernetClass::_server_port[sock] == _port) { + if (client.status() == SnSR::LISTEN) { + listening = 1; + } + else if (client.status() == SnSR::CLOSE_WAIT && !client.available()) { + client.stop(); + } + } + } + + if (!listening) { + begin(); + } +} + +EthernetClient EthernetServer::available() +{ + accept(); + + for (int sock = 0; sock < MAX_SOCK_NUM; sock++) { + EthernetClient client(sock); + if (EthernetClass::_server_port[sock] == _port && + (client.status() == SnSR::ESTABLISHED || + client.status() == SnSR::CLOSE_WAIT)) { + if (client.available()) { + // XXX: don't always pick the lowest numbered socket. + return client; + } + } + } + + return EthernetClient(MAX_SOCK_NUM); +} + +size_t EthernetServer::write(uint8_t b) +{ + return write(&b, 1); +} + +size_t EthernetServer::write(const uint8_t *buffer, size_t size) +{ + size_t n = 0; + + accept(); + + for (int sock = 0; sock < MAX_SOCK_NUM; sock++) { + EthernetClient client(sock); + + if (EthernetClass::_server_port[sock] == _port && + client.status() == SnSR::ESTABLISHED) { + n += client.write(buffer, size); + } + } + + return n; +} diff --git a/libraries/Ethernet/EthernetServer.h b/libraries/Ethernet/EthernetServer.h new file mode 100644 index 0000000..86ccafe --- /dev/null +++ b/libraries/Ethernet/EthernetServer.h @@ -0,0 +1,22 @@ +#ifndef ethernetserver_h +#define ethernetserver_h + +#include "Server.h" + +class EthernetClient; + +class EthernetServer : +public Server { +private: + uint16_t _port; + void accept(); +public: + EthernetServer(uint16_t); + EthernetClient available(); + virtual void begin(); + virtual size_t write(uint8_t); + virtual size_t write(const uint8_t *buf, size_t size); + using Print::write; +}; + +#endif diff --git a/libraries/Ethernet/EthernetUdp.cpp b/libraries/Ethernet/EthernetUdp.cpp new file mode 100644 index 0000000..3760052 --- /dev/null +++ b/libraries/Ethernet/EthernetUdp.cpp @@ -0,0 +1,218 @@ +/* + * Udp.cpp: Library to send/receive UDP packets with the Arduino ethernet shield. + * This version only offers minimal wrapping of socket.c/socket.h + * Drop Udp.h/.cpp into the Ethernet library directory at hardware/libraries/Ethernet/ + * + * MIT License: + * Copyright (c) 2008 Bjoern Hartmann + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * bjoern@cs.stanford.edu 12/30/2008 + */ + +#include "w5100.h" +#include "socket.h" +#include "Ethernet.h" +#include "Udp.h" +#include "Dns.h" + +/* Constructor */ +EthernetUDP::EthernetUDP() : _sock(MAX_SOCK_NUM) {} + +/* Start EthernetUDP socket, listening at local port PORT */ +uint8_t EthernetUDP::begin(uint16_t port) { + if (_sock != MAX_SOCK_NUM) + return 0; + + for (int i = 0; i < MAX_SOCK_NUM; i++) { + uint8_t s = W5100.readSnSR(i); + if (s == SnSR::CLOSED || s == SnSR::FIN_WAIT) { + _sock = i; + break; + } + } + + if (_sock == MAX_SOCK_NUM) + return 0; + + _port = port; + _remaining = 0; + socket(_sock, SnMR::UDP, _port, 0); + + return 1; +} + +/* return number of bytes available in the current packet, + will return zero if parsePacket hasn't been called yet */ +int EthernetUDP::available() { + return _remaining; +} + +/* Release any resources being used by this EthernetUDP instance */ +void EthernetUDP::stop() +{ + if (_sock == MAX_SOCK_NUM) + return; + + close(_sock); + + EthernetClass::_server_port[_sock] = 0; + _sock = MAX_SOCK_NUM; +} + +int EthernetUDP::beginPacket(const char *host, uint16_t port) +{ + // Look up the host first + int ret = 0; + DNSClient dns; + IPAddress remote_addr; + + dns.begin(Ethernet.dnsServerIP()); + ret = dns.getHostByName(host, remote_addr); + if (ret == 1) { + return beginPacket(remote_addr, port); + } else { + return ret; + } +} + +int EthernetUDP::beginPacket(IPAddress ip, uint16_t port) +{ + _offset = 0; + return startUDP(_sock, rawIPAddress(ip), port); +} + +int EthernetUDP::endPacket() +{ + return sendUDP(_sock); +} + +size_t EthernetUDP::write(uint8_t byte) +{ + return write(&byte, 1); +} + +size_t EthernetUDP::write(const uint8_t *buffer, size_t size) +{ + uint16_t bytes_written = bufferData(_sock, _offset, buffer, size); + _offset += bytes_written; + return bytes_written; +} + +int EthernetUDP::parsePacket() +{ + // discard any remaining bytes in the last packet + flush(); + + if (W5100.getRXReceivedSize(_sock) > 0) + { + //HACK - hand-parse the UDP packet using TCP recv method + uint8_t tmpBuf[8]; + int ret =0; + //read 8 header bytes and get IP and port from it + ret = recv(_sock,tmpBuf,8); + if (ret > 0) + { + _remoteIP = tmpBuf; + _remotePort = tmpBuf[4]; + _remotePort = (_remotePort << 8) + tmpBuf[5]; + _remaining = tmpBuf[6]; + _remaining = (_remaining << 8) + tmpBuf[7]; + + // When we get here, any remaining bytes are the data + ret = _remaining; + } + return ret; + } + // There aren't any packets available + return 0; +} + +int EthernetUDP::read() +{ + uint8_t byte; + + if ((_remaining > 0) && (recv(_sock, &byte, 1) > 0)) + { + // We read things without any problems + _remaining--; + return byte; + } + + // If we get here, there's no data available + return -1; +} + +int EthernetUDP::read(unsigned char* buffer, size_t len) +{ + + if (_remaining > 0) + { + + int got; + + if (_remaining <= len) + { + // data should fit in the buffer + got = recv(_sock, buffer, _remaining); + } + else + { + // too much data for the buffer, + // grab as much as will fit + got = recv(_sock, buffer, len); + } + + if (got > 0) + { + _remaining -= got; + return got; + } + + } + + // If we get here, there's no data available or recv failed + return -1; + +} + +int EthernetUDP::peek() +{ + uint8_t b; + // Unlike recv, peek doesn't check to see if there's any data available, so we must. + // If the user hasn't called parsePacket yet then return nothing otherwise they + // may get the UDP header + if (!_remaining) + return -1; + ::peek(_sock, &b); + return b; +} + +void EthernetUDP::flush() +{ + // could this fail (loop endlessly) if _remaining > 0 and recv in read fails? + // should only occur if recv fails after telling us the data is there, lets + // hope the w5100 always behaves :) + + while (_remaining) + { + read(); + } +} + diff --git a/libraries/Ethernet/EthernetUdp.h b/libraries/Ethernet/EthernetUdp.h new file mode 100644 index 0000000..8a6b7ab --- /dev/null +++ b/libraries/Ethernet/EthernetUdp.h @@ -0,0 +1,99 @@ +/* + * Udp.cpp: Library to send/receive UDP packets with the Arduino ethernet shield. + * This version only offers minimal wrapping of socket.c/socket.h + * Drop Udp.h/.cpp into the Ethernet library directory at hardware/libraries/Ethernet/ + * + * NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these) + * 1) UDP does not guarantee the order in which assembled UDP packets are received. This + * might not happen often in practice, but in larger network topologies, a UDP + * packet can be received out of sequence. + * 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being + * aware of it. Again, this may not be a concern in practice on small local networks. + * For more information, see http://www.cafeaulait.org/course/week12/35.html + * + * MIT License: + * Copyright (c) 2008 Bjoern Hartmann + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * bjoern@cs.stanford.edu 12/30/2008 + */ + +#ifndef ethernetudp_h +#define ethernetudp_h + +#include <Udp.h> + +#define UDP_TX_PACKET_MAX_SIZE 24 + +class EthernetUDP : public UDP { +private: + uint8_t _sock; // socket ID for Wiz5100 + uint16_t _port; // local port to listen on + IPAddress _remoteIP; // remote IP address for the incoming packet whilst it's being processed + uint16_t _remotePort; // remote port for the incoming packet whilst it's being processed + uint16_t _offset; // offset into the packet being sent + uint16_t _remaining; // remaining bytes of incoming packet yet to be processed + +public: + EthernetUDP(); // Constructor + virtual uint8_t begin(uint16_t); // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use + virtual void stop(); // Finish with the UDP socket + + // Sending UDP packets + + // Start building up a packet to send to the remote host specific in ip and port + // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port + virtual int beginPacket(IPAddress ip, uint16_t port); + // Start building up a packet to send to the remote host specific in host and port + // Returns 1 if successful, 0 if there was a problem resolving the hostname or port + virtual int beginPacket(const char *host, uint16_t port); + // Finish off this packet and send it + // Returns 1 if the packet was sent successfully, 0 if there was an error + virtual int endPacket(); + // Write a single byte into the packet + virtual size_t write(uint8_t); + // Write size bytes from buffer into the packet + virtual size_t write(const uint8_t *buffer, size_t size); + + using Print::write; + + // Start processing the next available incoming packet + // Returns the size of the packet in bytes, or 0 if no packets are available + virtual int parsePacket(); + // Number of bytes remaining in the current packet + virtual int available(); + // Read a single byte from the current packet + virtual int read(); + // Read up to len bytes from the current packet and place them into buffer + // Returns the number of bytes read, or 0 if none are available + virtual int read(unsigned char* buffer, size_t len); + // Read up to len characters from the current packet and place them into buffer + // Returns the number of characters read, or 0 if none are available + virtual int read(char* buffer, size_t len) { return read((unsigned char*)buffer, len); }; + // Return the next byte from the current packet without moving on to the next byte + virtual int peek(); + virtual void flush(); // Finish reading the current packet + + // Return the IP address of the host who sent the current incoming packet + virtual IPAddress remoteIP() { return _remoteIP; }; + // Return the port of the host who sent the current incoming packet + virtual uint16_t remotePort() { return _remotePort; }; +}; + +#endif diff --git a/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino b/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino new file mode 100644 index 0000000..bfbcb6d --- /dev/null +++ b/libraries/Ethernet/examples/BarometricPressureWebServer/BarometricPressureWebServer.ino @@ -0,0 +1,222 @@ +/* + SCP1000 Barometric Pressure Sensor Display + + Serves the output of a Barometric Pressure Sensor as a web page. + Uses the SPI library. For details on the sensor, see: + http://www.sparkfun.com/commerce/product_info.php?products_id=8161 + http://www.vti.fi/en/support/obsolete_products/pressure_sensors/ + + This sketch adapted from Nathan Seidle's SCP1000 example for PIC: + http://www.sparkfun.com/datasheets/Sensors/SCP1000-Testing.zip + + Circuit: + SCP1000 sensor attached to pins 6,7, and 11 - 13: + DRDY: pin 6 + CSB: pin 7 + MOSI: pin 11 + MISO: pin 12 + SCK: pin 13 + + created 31 July 2010 + by Tom Igoe + */ + +#include <Ethernet.h> +// the sensor communicates using SPI, so include the library: +#include <SPI.h> + + +// assign a MAC address for the ethernet controller. +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; +// assign an IP address for the controller: +IPAddress ip(192,168,1,20); +IPAddress gateway(192,168,1,1); +IPAddress subnet(255, 255, 255, 0); + + +// Initialize the Ethernet server library +// with the IP address and port you want to use +// (port 80 is default for HTTP): +EthernetServer server(80); + + +//Sensor's memory register addresses: +const int PRESSURE = 0x1F; //3 most significant bits of pressure +const int PRESSURE_LSB = 0x20; //16 least significant bits of pressure +const int TEMPERATURE = 0x21; //16 bit temperature reading + +// pins used for the connection with the sensor +// the others you need are controlled by the SPI library): +const int dataReadyPin = 6; +const int chipSelectPin = 7; + +float temperature = 0.0; +long pressure = 0; +long lastReadingTime = 0; + +void setup() { + // start the SPI library: + SPI.begin(); + + // start the Ethernet connection and the server: + Ethernet.begin(mac, ip); + server.begin(); + + // initalize the data ready and chip select pins: + pinMode(dataReadyPin, INPUT); + pinMode(chipSelectPin, OUTPUT); + + Serial.begin(9600); + + //Configure SCP1000 for low noise configuration: + writeRegister(0x02, 0x2D); + writeRegister(0x01, 0x03); + writeRegister(0x03, 0x02); + + // give the sensor and Ethernet shield time to set up: + delay(1000); + + //Set the sensor to high resolution mode tp start readings: + writeRegister(0x03, 0x0A); + +} + +void loop() { + // check for a reading no more than once a second. + if (millis() - lastReadingTime > 1000){ + // if there's a reading ready, read it: + // don't do anything until the data ready pin is high: + if (digitalRead(dataReadyPin) == HIGH) { + getData(); + // timestamp the last time you got a reading: + lastReadingTime = millis(); + } + } + + // listen for incoming Ethernet connections: + listenForEthernetClients(); +} + + +void getData() { + Serial.println("Getting reading"); + //Read the temperature data + int tempData = readRegister(0x21, 2); + + // convert the temperature to celsius and display it: + temperature = (float)tempData / 20.0; + + //Read the pressure data highest 3 bits: + byte pressureDataHigh = readRegister(0x1F, 1); + pressureDataHigh &= 0b00000111; //you only needs bits 2 to 0 + + //Read the pressure data lower 16 bits: + unsigned int pressureDataLow = readRegister(0x20, 2); + //combine the two parts into one 19-bit number: + pressure = ((pressureDataHigh << 16) | pressureDataLow)/4; + + Serial.print("Temperature: "); + Serial.print(temperature); + Serial.println(" degrees C"); + Serial.print("Pressure: " + String(pressure)); + Serial.println(" Pa"); +} + +void listenForEthernetClients() { + // listen for incoming clients + EthernetClient client = server.available(); + if (client) { + Serial.println("Got a client"); + // an http request ends with a blank line + boolean currentLineIsBlank = true; + while (client.connected()) { + if (client.available()) { + char c = client.read(); + // if you've gotten to the end of the line (received a newline + // character) and the line is blank, the http request has ended, + // so you can send a reply + if (c == '\n' && currentLineIsBlank) { + // send a standard http response header + client.println("HTTP/1.1 200 OK"); + client.println("Content-Type: text/html"); + client.println(); + // print the current readings, in HTML format: + client.print("Temperature: "); + client.print(temperature); + client.print(" degrees C"); + client.println("<br />"); + client.print("Pressure: " + String(pressure)); + client.print(" Pa"); + client.println("<br />"); + break; + } + if (c == '\n') { + // you're starting a new line + currentLineIsBlank = true; + } + else if (c != '\r') { + // you've gotten a character on the current line + currentLineIsBlank = false; + } + } + } + // give the web browser time to receive the data + delay(1); + // close the connection: + client.stop(); + } +} + + +//Send a write command to SCP1000 +void writeRegister(byte registerName, byte registerValue) { + // SCP1000 expects the register name in the upper 6 bits + // of the byte: + registerName <<= 2; + // command (read or write) goes in the lower two bits: + registerName |= 0b00000010; //Write command + + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + + SPI.transfer(registerName); //Send register location + SPI.transfer(registerValue); //Send value to record into register + + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); +} + + +//Read register from the SCP1000: +unsigned int readRegister(byte registerName, int numBytes) { + byte inByte = 0; // incoming from the SPI read + unsigned int result = 0; // result to return + + // SCP1000 expects the register name in the upper 6 bits + // of the byte: + registerName <<= 2; + // command (read or write) goes in the lower two bits: + registerName &= 0b11111100; //Read command + + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + // send the device the register you want to read: + int command = SPI.transfer(registerName); + // send a value of 0 to read the first byte returned: + inByte = SPI.transfer(0x00); + + result = inByte; + // if there's more than one byte returned, + // shift the first byte then get the second byte: + if (numBytes > 1){ + result = inByte << 8; + inByte = SPI.transfer(0x00); + result = result |inByte; + } + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); + // return the result: + return(result); +} diff --git a/libraries/Ethernet/examples/ChatServer/ChatServer.ino b/libraries/Ethernet/examples/ChatServer/ChatServer.ino new file mode 100644 index 0000000..d50e5a6 --- /dev/null +++ b/libraries/Ethernet/examples/ChatServer/ChatServer.ino @@ -0,0 +1,79 @@ +/* + Chat Server + + A simple server that distributes any incoming messages to all + connected clients. To use telnet to your device's IP address and type. + You can see the client's input in the serial monitor as well. + Using an Arduino Wiznet Ethernet shield. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + * Analog inputs attached to pins A0 through A5 (optional) + + created 18 Dec 2009 + by David A. Mellis + modified 9 Apr 2012 + by Tom Igoe + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// Enter a MAC address and IP address for your controller below. +// The IP address will be dependent on your local network. +// gateway and subnet are optional: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +IPAddress ip(192,168,1, 177); +IPAddress gateway(192,168,1, 1); +IPAddress subnet(255, 255, 0, 0); + + +// telnet defaults to port 23 +EthernetServer server(23); +boolean alreadyConnected = false; // whether or not the client was connected previously + +void setup() { + // initialize the ethernet device + Ethernet.begin(mac, ip, gateway, subnet); + // start listening for clients + server.begin(); + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + Serial.print("Chat server address:"); + Serial.println(Ethernet.localIP()); +} + +void loop() { + // wait for a new client: + EthernetClient client = server.available(); + + // when the client sends the first byte, say hello: + if (client) { + if (!alreadyConnected) { + // clead out the input buffer: + client.flush(); + Serial.println("We have a new client"); + client.println("Hello, client!"); + alreadyConnected = true; + } + + if (client.available() > 0) { + // read the bytes incoming from the client: + char thisChar = client.read(); + // echo the bytes back to the client: + server.write(thisChar); + // echo the bytes to the server as well: + Serial.write(thisChar); + } + } +} + + + diff --git a/libraries/Ethernet/examples/CosmClient/CosmClient.ino b/libraries/Ethernet/examples/CosmClient/CosmClient.ino new file mode 100644 index 0000000..ec74278 --- /dev/null +++ b/libraries/Ethernet/examples/CosmClient/CosmClient.ino @@ -0,0 +1,161 @@ +/* + Cosm sensor client + + This sketch connects an analog sensor to Cosm (http://www.cosm.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the cosm.com API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + updated 14 May 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + +http://arduino.cc/en/Tutorial/CosmClient + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + +#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// assign a MAC address for the ethernet controller. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); + +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +char server[] = "api.cosm.com"; // name address for cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10L*1000L; // delay between updates to cosm.com + // the "L" is needed to use long type numbers + + +void setup() { + // start serial port: + Serial.begin(9600); + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(sensorReading); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(int thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + + // calculate the length of the sensor reading in bytes: + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.print("sensor1,"); + client.println(thisData); + + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + + +// This method calculates the number of digits in the +// sensor reading. Since each digit of the ASCII decimal +// representation is a byte, the number of digits equals +// the number of bytes: + +int getLength(int someValue) { + // there's at least one byte: + int digits = 1; + // continually divide the value by ten, + // adding one to the digit count for each + // time you divide, until you're at 0: + int dividend = someValue /10; + while (dividend > 0) { + dividend = dividend /10; + digits++; + } + // return the number of digits: + return digits; +} + diff --git a/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino b/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino new file mode 100644 index 0000000..e619924 --- /dev/null +++ b/libraries/Ethernet/examples/CosmClientString/CosmClientString.ino @@ -0,0 +1,146 @@ +/* + Cosm sensor client with Strings + + This sketch connects an analog sensor to Cosm (http://www.cosm.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the Cosm.com API. + To make it work, create a feed with two datastreams, and give them the IDs + sensor1 and sensor2. Or change the code below to match your feed. + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + updated 14 May 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + + http://arduino.cc/en/Tutorial/CosmClientString + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + + +#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// assign a MAC address for the ethernet controller. +// fill in your address here: + byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); + +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +char server[] = "api.cosm.com"; // name address for Cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10L*1000L; // delay between updates to Cosm.com + // the "L" is needed to use long type numbers +void setup() { + // start serial port: + Serial.begin(9600); + // give the ethernet module time to boot up: + delay(1000); + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + // convert the data to a String to send it: + + String dataString = "sensor1,"; + dataString += sensorReading; + + // you can append multiple readings to this String if your + // Cosm feed is set up to handle multiple values: + int otherSensorReading = analogRead(A1); + dataString += "\nsensor2,"; + dataString += otherSensorReading; + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(dataString); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(String thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + client.println(thisData.length()); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.println(thisData); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + diff --git a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino new file mode 100644 index 0000000..5eaaf24 --- /dev/null +++ b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino @@ -0,0 +1,59 @@ +/* + DHCP-based IP printer + + This sketch uses the DHCP extensions to the Ethernet library + to get an IP address via DHCP and print the address obtained. + using an Arduino Wiznet Ethernet shield. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 12 April 2011 + modified 9 Apr 2012 + by Tom Igoe + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// Enter a MAC address for your controller below. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +byte mac[] = { + 0x00, 0xAA, 0xBB, 0xCC, 0xDE, 0x02 }; + +// Initialize the Ethernet client library +// with the IP address and port of the server +// that you want to connect to (port 80 is default for HTTP): +EthernetClient client; + +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // no point in carrying on, so do nothing forevermore: + for(;;) + ; + } + // print your local IP address: + Serial.print("My IP address: "); + for (byte thisByte = 0; thisByte < 4; thisByte++) { + // print the value of each byte of the IP address: + Serial.print(Ethernet.localIP()[thisByte], DEC); + Serial.print("."); + } + Serial.println(); +} + +void loop() { + +} + + diff --git a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino new file mode 100644 index 0000000..09cbd43 --- /dev/null +++ b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino @@ -0,0 +1,87 @@ +/* + DHCP Chat Server + + A simple server that distributes any incoming messages to all + connected clients. To use telnet to your device's IP address and type. + You can see the client's input in the serial monitor as well. + Using an Arduino Wiznet Ethernet shield. + + THis version attempts to get an IP address using DHCP + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 21 May 2011 + modified 9 Apr 2012 + by Tom Igoe + Based on ChatServer example by David A. Mellis + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// Enter a MAC address and IP address for your controller below. +// The IP address will be dependent on your local network. +// gateway and subnet are optional: +byte mac[] = { + 0x00, 0xAA, 0xBB, 0xCC, 0xDE, 0x02 }; +IPAddress ip(192,168,1, 177); +IPAddress gateway(192,168,1, 1); +IPAddress subnet(255, 255, 0, 0); + +// telnet defaults to port 23 +EthernetServer server(23); +boolean gotAMessage = false; // whether or not you got a message from the client yet + +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // start the Ethernet connection: + Serial.println("Trying to get an IP address using DHCP"); + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // initialize the ethernet device not using DHCP: + Ethernet.begin(mac, ip, gateway, subnet); + } + // print your local IP address: + Serial.print("My IP address: "); + ip = Ethernet.localIP(); + for (byte thisByte = 0; thisByte < 4; thisByte++) { + // print the value of each byte of the IP address: + Serial.print(ip[thisByte], DEC); + Serial.print("."); + } + Serial.println(); + // start listening for clients + server.begin(); + +} + +void loop() { + // wait for a new client: + EthernetClient client = server.available(); + + // when the client sends the first byte, say hello: + if (client) { + if (!gotAMessage) { + Serial.println("We have a new client"); + client.println("Hello, client!"); + gotAMessage = true; + } + + // read the bytes incoming from the client: + char thisChar = client.read(); + // echo the bytes back to the client: + server.write(thisChar); + // echo the bytes to the server as well: + Serial.print(thisChar); + } +} + diff --git a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino new file mode 100644 index 0000000..c14abf4 --- /dev/null +++ b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino @@ -0,0 +1,81 @@ +/* + DNS and DHCP-based Web client + + This sketch connects to a website (http://www.google.com) + using an Arduino Wiznet Ethernet shield. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 18 Dec 2009 + by David A. Mellis + modified 9 Apr 2012 + by Tom Igoe, based on work by Adrian McEwen + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// Enter a MAC address for your controller below. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +byte mac[] = { 0x00, 0xAA, 0xBB, 0xCC, 0xDE, 0x02 }; +char serverName[] = "www.google.com"; + +// Initialize the Ethernet client library +// with the IP address and port of the server +// that you want to connect to (port 80 is default for HTTP): +EthernetClient client; + +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // no point in carrying on, so do nothing forevermore: + while(true); + } + // give the Ethernet shield a second to initialize: + delay(1000); + Serial.println("connecting..."); + + // if you get a connection, report back via serial: + + if (client.connect(serverName, 80)) { + Serial.println("connected"); + // Make a HTTP request: + client.println("GET /search?q=arduino HTTP/1.0"); + client.println(); + } + else { + // kf you didn't get a connection to the server: + Serial.println("connection failed"); + } +} + +void loop() +{ + // if there are incoming bytes available + // from the server, read them and print them: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if the server's disconnected, stop the client: + if (!client.connected()) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + + // do nothing forevermore: + while(true); + } +} + diff --git a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino new file mode 100644 index 0000000..dfd2d40 --- /dev/null +++ b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino @@ -0,0 +1,163 @@ +/* + Pachube sensor client + + This sketch connects an analog sensor to Pachube (http://www.pachube.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the Pachube.com API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + modified 9 Apr 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + +http://arduino.cc/en/Tutorial/PachubeClient + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + +#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// assign a MAC address for the ethernet controller. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +IPAddress server(216,52,233,122); // numeric IP for api.pachube.com +//char server[] = "api.pachube.com"; // name address for pachube API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com + +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(sensorReading); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(int thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.pachube.com"); + client.print("X-PachubeApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + + // calculate the length of the sensor reading in bytes: + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.print("sensor1,"); + client.println(thisData); + + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + + +// This method calculates the number of digits in the +// sensor reading. Since each digit of the ASCII decimal +// representation is a byte, the number of digits equals +// the number of bytes: + +int getLength(int someValue) { + // there's at least one byte: + int digits = 1; + // continually divide the value by ten, + // adding one to the digit count for each + // time you divide, until you're at 0: + int dividend = someValue /10; + while (dividend > 0) { + dividend = dividend /10; + digits++; + } + // return the number of digits: + return digits; +} + diff --git a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino new file mode 100644 index 0000000..2a96e9f --- /dev/null +++ b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino @@ -0,0 +1,152 @@ +/* + Cosm sensor client with Strings + + This sketch connects an analog sensor to Cosm (http://www.cosm.com) + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example has been updated to use version 2.0 of the Cosm.com API. + To make it work, create a feed with two datastreams, and give them the IDs + sensor1 and sensor2. Or change the code below to match your feed. + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * Analog sensor attached to analog in 0 + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 15 March 2010 + modified 9 Apr 2012 + by Tom Igoe with input from Usman Haque and Joe Saavedra + + http://arduino.cc/en/Tutorial/CosmClientString + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + + +/#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + + +// assign a MAC address for the ethernet controller. +// fill in your address here: + byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,1,20); + +// initialize the library instance: +EthernetClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +//char server[] = "api.cosm.com"; // name address for Cosm API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to Cosm.com + +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // give the ethernet module time to boot up: + delay(1000); + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // DHCP failed, so use a fixed IP address: + Ethernet.begin(mac, ip); + } +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + // convert the data to a String to send it: + + String dataString = "sensor1,"; + dataString += sensorReading; + + // you can append multiple readings to this String if your + // Cosm feed is set up to handle multiple values: + int otherSensorReading = analogRead(A1); + dataString += "\nsensor2,"; + dataString += otherSensorReading; + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(dataString); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(String thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.cosm.com"); + client.print("X-CosmApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + client.println(thisData.length()); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.println(thisData); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + diff --git a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino new file mode 100644 index 0000000..3457125 --- /dev/null +++ b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino @@ -0,0 +1,93 @@ +/* + Telnet client + + This sketch connects to a a telnet server (http://www.google.com) + using an Arduino Wiznet Ethernet shield. You'll need a telnet server + to test this with. + Processing's ChatServer example (part of the network library) works well, + running on port 10002. It can be found as part of the examples + in the Processing application, available at + http://processing.org/ + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 14 Sep 2010 + modified 9 Apr 2012 + by Tom Igoe + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// Enter a MAC address and IP address for your controller below. +// The IP address will be dependent on your local network: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +IPAddress ip(192,168,1,177); + +// Enter the IP address of the server you're connecting to: +IPAddress server(1,1,1,1); + +// Initialize the Ethernet client library +// with the IP address and port of the server +// that you want to connect to (port 23 is default for telnet; +// if you're using Processing's ChatServer, use port 10002): +EthernetClient client; + +void setup() { + // start the Ethernet connection: + Ethernet.begin(mac, ip); + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // give the Ethernet shield a second to initialize: + delay(1000); + Serial.println("connecting..."); + + // if you get a connection, report back via serial: + if (client.connect(server, 10002)) { + Serial.println("connected"); + } + else { + // if you didn't get a connection to the server: + Serial.println("connection failed"); + } +} + +void loop() +{ + // if there are incoming bytes available + // from the server, read them and print them: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // as long as there are bytes in the serial queue, + // read them and send them out the socket if it's open: + while (Serial.available() > 0) { + char inChar = Serial.read(); + if (client.connected()) { + client.print(inChar); + } + } + + // if the server's disconnected, stop the client: + if (!client.connected()) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + // do nothing: + while(true); + } +} + + + + diff --git a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino new file mode 100644 index 0000000..3587d72 --- /dev/null +++ b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino @@ -0,0 +1,135 @@ +/* + Twitter Client with Strings + + This sketch connects to Twitter using an Ethernet shield. It parses the XML + returned, and looks for <text>this is a tweet</text> + + You can use the Arduino Ethernet shield, or the Adafruit Ethernet shield, + either one will work, as long as it's got a Wiznet Ethernet module on board. + + This example uses the DHCP routines in the Ethernet library which is part of the + Arduino core from version 1.0 beta 1 + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 21 May 2011 + modified 9 Apr 2012 + by Tom Igoe + + This code is in the public domain. + + */ +#include <SPI.h> +#include <Ethernet.h> + + +// Enter a MAC address and IP address for your controller below. +// The IP address will be dependent on your local network: +byte mac[] = { + 0x00, 0xAA, 0xBB, 0xCC, 0xDE, 0x01 }; +IPAddress ip(192,168,1,20); + +// initialize the library instance: +EthernetClient client; + +const unsigned long requestInterval = 60000; // delay between requests + +char serverName[] = "api.twitter.com"; // twitter URL + +boolean requested; // whether you've made a request since connecting +unsigned long lastAttemptTime = 0; // last time you connected to the server, in milliseconds + +String currentLine = ""; // string to hold the text from server +String tweet = ""; // string to hold the tweet +boolean readingTweet = false; // if you're currently reading the tweet + +void setup() { + // reserve space for the strings: + currentLine.reserve(256); + tweet.reserve(150); + + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // attempt a DHCP connection: + Serial.println("Attempting to get an IP address using DHCP:"); + if (!Ethernet.begin(mac)) { + // if DHCP fails, start with a hard-coded address: + Serial.println("failed to get an IP address using DHCP, trying manually"); + Ethernet.begin(mac, ip); + } + Serial.print("My address:"); + Serial.println(Ethernet.localIP()); + // connect to Twitter: + connectToServer(); +} + + + +void loop() +{ + if (client.connected()) { + if (client.available()) { + // read incoming bytes: + char inChar = client.read(); + + // add incoming byte to end of line: + currentLine += inChar; + + // if you get a newline, clear the line: + if (inChar == '\n') { + currentLine = ""; + } + // if the current line ends with <text>, it will + // be followed by the tweet: + if ( currentLine.endsWith("<text>")) { + // tweet is beginning. Clear the tweet string: + readingTweet = true; + tweet = ""; + } + // if you're currently reading the bytes of a tweet, + // add them to the tweet String: + if (readingTweet) { + if (inChar != '<') { + tweet += inChar; + } + else { + // if you got a "<" character, + // you've reached the end of the tweet: + readingTweet = false; + Serial.println(tweet); + // close the connection to the server: + client.stop(); + } + } + } + } + else if (millis() - lastAttemptTime > requestInterval) { + // if you're not connected, and two minutes have passed since + // your last connection, then attempt to connect again: + connectToServer(); + } +} + +void connectToServer() { + // attempt to connect, and wait a millisecond: + Serial.println("connecting to server..."); + if (client.connect(serverName, 80)) { + Serial.println("making HTTP request..."); + // make HTTP GET request to twitter: + client.println("GET /1/statuses/user_timeline.xml?screen_name=arduino&count=1 HTTP/1.1"); + client.println("HOST: api.twitter.com"); + client.println(); + } + // note the time of this connect attempt: + lastAttemptTime = millis(); +} + diff --git a/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino b/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino new file mode 100644 index 0000000..4d4045c --- /dev/null +++ b/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.ino @@ -0,0 +1,118 @@ +/* + UDPSendReceive.pde: + This sketch receives UDP message strings, prints them to the serial port + and sends an "acknowledge" string back to the sender + + A Processing sketch is included at the end of file that can be used to send + and received messages for testing with a computer. + + created 21 Aug 2010 + by Michael Margolis + + This code is in the public domain. + */ + + +#include <SPI.h> // needed for Arduino versions later than 0018 +#include <Ethernet.h> +#include <EthernetUdp.h> // UDP library from: bjoern@cs.stanford.edu 12/30/2008 + + +// Enter a MAC address and IP address for your controller below. +// The IP address will be dependent on your local network: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +IPAddress ip(192, 168, 1, 177); + +unsigned int localPort = 8888; // local port to listen on + +// buffers for receiving and sending data +char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; //buffer to hold incoming packet, +char ReplyBuffer[] = "acknowledged"; // a string to send back + +// An EthernetUDP instance to let us send and receive packets over UDP +EthernetUDP Udp; + +void setup() { + // start the Ethernet and UDP: + Ethernet.begin(mac,ip); + Udp.begin(localPort); + + Serial.begin(9600); +} + +void loop() { + // if there's data available, read a packet + int packetSize = Udp.parsePacket(); + if(packetSize) + { + Serial.print("Received packet of size "); + Serial.println(packetSize); + Serial.print("From "); + IPAddress remote = Udp.remoteIP(); + for (int i =0; i < 4; i++) + { + Serial.print(remote[i], DEC); + if (i < 3) + { + Serial.print("."); + } + } + Serial.print(", port "); + Serial.println(Udp.remotePort()); + + // read the packet into packetBufffer + Udp.read(packetBuffer,UDP_TX_PACKET_MAX_SIZE); + Serial.println("Contents:"); + Serial.println(packetBuffer); + + // send a reply, to the IP address and port that sent us the packet we received + Udp.beginPacket(Udp.remoteIP(), Udp.remotePort()); + Udp.write(ReplyBuffer); + Udp.endPacket(); + } + delay(10); +} + + +/* + Processing sketch to run with this example + ===================================================== + + // Processing UDP example to send and receive string data from Arduino + // press any key to send the "Hello Arduino" message + + + import hypermedia.net.*; + + UDP udp; // define the UDP object + + + void setup() { + udp = new UDP( this, 6000 ); // create a new datagram connection on port 6000 + //udp.log( true ); // <-- printout the connection activity + udp.listen( true ); // and wait for incoming message + } + + void draw() + { + } + + void keyPressed() { + String ip = "192.168.1.177"; // the remote IP address + int port = 8888; // the destination port + + udp.send("Hello World", ip, port ); // the message to send + + } + + void receive( byte[] data ) { // <-- default handler + //void receive( byte[] data, String ip, int port ) { // <-- extended handler + + for(int i=0; i < data.length; i++) + print(char(data[i])); + println(); + } + */ + + diff --git a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino new file mode 100644 index 0000000..93ffe39 --- /dev/null +++ b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino @@ -0,0 +1,141 @@ +/* + + Udp NTP Client + + Get the time from a Network Time Protocol (NTP) time server + Demonstrates use of UDP sendPacket and ReceivePacket + For more on NTP time servers and the messages needed to communicate with them, + see http://en.wikipedia.org/wiki/Network_Time_Protocol + + created 4 Sep 2010 + by Michael Margolis + modified 9 Apr 2012 + by Tom Igoe + + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> +#include <EthernetUdp.h> + +// Enter a MAC address for your controller below. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; + +unsigned int localPort = 8888; // local port to listen for UDP packets + +IPAddress timeServer(192, 43, 244, 18); // time.nist.gov NTP server + +const int NTP_PACKET_SIZE= 48; // NTP time stamp is in the first 48 bytes of the message + +byte packetBuffer[ NTP_PACKET_SIZE]; //buffer to hold incoming and outgoing packets + +// A UDP instance to let us send and receive packets over UDP +EthernetUDP Udp; + +void setup() +{ + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // start Ethernet and UDP + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // no point in carrying on, so do nothing forevermore: + for(;;) + ; + } + Udp.begin(localPort); +} + +void loop() +{ + sendNTPpacket(timeServer); // send an NTP packet to a time server + + // wait to see if a reply is available + delay(1000); + if ( Udp.parsePacket() ) { + // We've received a packet, read the data from it + Udp.read(packetBuffer,NTP_PACKET_SIZE); // read the packet into the buffer + + //the timestamp starts at byte 40 of the received packet and is four bytes, + // or two words, long. First, esxtract the two words: + + unsigned long highWord = word(packetBuffer[40], packetBuffer[41]); + unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]); + // combine the four bytes (two words) into a long integer + // this is NTP time (seconds since Jan 1 1900): + unsigned long secsSince1900 = highWord << 16 | lowWord; + Serial.print("Seconds since Jan 1 1900 = " ); + Serial.println(secsSince1900); + + // now convert NTP time into everyday time: + Serial.print("Unix time = "); + // Unix time starts on Jan 1 1970. In seconds, that's 2208988800: + const unsigned long seventyYears = 2208988800UL; + // subtract seventy years: + unsigned long epoch = secsSince1900 - seventyYears; + // print Unix time: + Serial.println(epoch); + + + // print the hour, minute and second: + Serial.print("The UTC time is "); // UTC is the time at Greenwich Meridian (GMT) + Serial.print((epoch % 86400L) / 3600); // print the hour (86400 equals secs per day) + Serial.print(':'); + if ( ((epoch % 3600) / 60) < 10 ) { + // In the first 10 minutes of each hour, we'll want a leading '0' + Serial.print('0'); + } + Serial.print((epoch % 3600) / 60); // print the minute (3600 equals secs per minute) + Serial.print(':'); + if ( (epoch % 60) < 10 ) { + // In the first 10 seconds of each minute, we'll want a leading '0' + Serial.print('0'); + } + Serial.println(epoch %60); // print the second + } + // wait ten seconds before asking for the time again + delay(10000); +} + +// send an NTP request to the time server at the given address +unsigned long sendNTPpacket(IPAddress& address) +{ + // set all bytes in the buffer to 0 + memset(packetBuffer, 0, NTP_PACKET_SIZE); + // Initialize values needed to form NTP request + // (see URL above for details on the packets) + packetBuffer[0] = 0b11100011; // LI, Version, Mode + packetBuffer[1] = 0; // Stratum, or type of clock + packetBuffer[2] = 6; // Polling Interval + packetBuffer[3] = 0xEC; // Peer Clock Precision + // 8 bytes of zero for Root Delay & Root Dispersion + packetBuffer[12] = 49; + packetBuffer[13] = 0x4E; + packetBuffer[14] = 49; + packetBuffer[15] = 52; + + // all NTP fields have been given values, now + // you can send a packet requesting a timestamp: + Udp.beginPacket(address, 123); //NTP requests are to port 123 + Udp.write(packetBuffer,NTP_PACKET_SIZE); + Udp.endPacket(); +} + + + + + + + + + + diff --git a/libraries/Ethernet/examples/WebClient/WebClient.ino b/libraries/Ethernet/examples/WebClient/WebClient.ino new file mode 100644 index 0000000..5d5d7f2 --- /dev/null +++ b/libraries/Ethernet/examples/WebClient/WebClient.ino @@ -0,0 +1,80 @@ +/* + Web client + + This sketch connects to a website (http://www.google.com) + using an Arduino Wiznet Ethernet shield. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 18 Dec 2009 + modified 9 Apr 2012 + by David A. Mellis + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// Enter a MAC address for your controller below. +// Newer Ethernet shields have a MAC address printed on a sticker on the shield +byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +IPAddress server(173,194,33,104); // Google + +// Initialize the Ethernet client library +// with the IP address and port of the server +// that you want to connect to (port 80 is default for HTTP): +EthernetClient client; + +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: + if (Ethernet.begin(mac) == 0) { + Serial.println("Failed to configure Ethernet using DHCP"); + // no point in carrying on, so do nothing forevermore: + for(;;) + ; + } + // give the Ethernet shield a second to initialize: + delay(1000); + Serial.println("connecting..."); + + // if you get a connection, report back via serial: + if (client.connect(server, 80)) { + Serial.println("connected"); + // Make a HTTP request: + client.println("GET /search?q=arduino HTTP/1.0"); + client.println(); + } + else { + // kf you didn't get a connection to the server: + Serial.println("connection failed"); + } +} + +void loop() +{ + // if there are incoming bytes available + // from the server, read them and print them: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if the server's disconnected, stop the client: + if (!client.connected()) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + + // do nothing forevermore: + for(;;) + ; + } +} + diff --git a/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino new file mode 100644 index 0000000..650f74e --- /dev/null +++ b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino @@ -0,0 +1,111 @@ +/* + Repeating Web client + + This sketch connects to a a web server and makes a request + using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or + the Adafruit Ethernet shield, either one will work, as long as it's got + a Wiznet Ethernet module on board. + + This example uses DNS, by assigning the Ethernet client with a MAC address, + IP address, and DNS address. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + + created 19 Apr 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/WebClientRepeating + This code is in the public domain. + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// assign a MAC address for the ethernet controller. +// fill in your address here: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; +// fill in an available IP address on your network here, +// for manual configuration: +IPAddress ip(10,0,0,20); + +// fill in your Domain Name Server address here: +IPAddress myDns(1,1,1,1); + +// initialize the library instance: +EthernetClient client; + +char server[] = "www.arduino.cc"; + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 60L*1000L; // delay between updates, in milliseconds + // the "L" is needed to use long type numbers + +void setup() { + // start serial port: + Serial.begin(9600); + // give the ethernet module time to boot up: + delay(1000); + // start the Ethernet connection using a fixed IP address and DNS server: + Ethernet.begin(mac, ip, myDns); + // print the Ethernet board/shield's IP address: + Serial.print("My IP address: "); + Serial.println(Ethernet.localIP()); +} + +void loop() { + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + httpRequest(); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void httpRequest() { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.println("GET /latest.txt HTTP/1.1"); + client.println("Host: www.arduino.cc"); + client.println("User-Agent: arduino-ethernet"); + client.println("Connection: close"); + client.println(); + + // note the time that the connection was made: + lastConnectionTime = millis(); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println("disconnecting."); + client.stop(); + } +} + + + + diff --git a/libraries/Ethernet/examples/WebServer/WebServer.ino b/libraries/Ethernet/examples/WebServer/WebServer.ino new file mode 100644 index 0000000..0573f05 --- /dev/null +++ b/libraries/Ethernet/examples/WebServer/WebServer.ino @@ -0,0 +1,101 @@ +/* + Web Server + + A simple web server that shows the value of the analog input pins. + using an Arduino Wiznet Ethernet shield. + + Circuit: + * Ethernet shield attached to pins 10, 11, 12, 13 + * Analog inputs attached to pins A0 through A5 (optional) + + created 18 Dec 2009 + by David A. Mellis + modified 9 Apr 2012 + by Tom Igoe + + */ + +#include <SPI.h> +#include <Ethernet.h> + +// Enter a MAC address and IP address for your controller below. +// The IP address will be dependent on your local network: +byte mac[] = { + 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; +IPAddress ip(192,168,1, 177); + +// Initialize the Ethernet server library +// with the IP address and port you want to use +// (port 80 is default for HTTP): +EthernetServer server(80); + +void setup() { + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // start the Ethernet connection and the server: + Ethernet.begin(mac, ip); + server.begin(); + Serial.print("server is at "); + Serial.println(Ethernet.localIP()); +} + + +void loop() { + // listen for incoming clients + EthernetClient client = server.available(); + if (client) { + Serial.println("new client"); + // an http request ends with a blank line + boolean currentLineIsBlank = true; + while (client.connected()) { + if (client.available()) { + char c = client.read(); + Serial.write(c); + // if you've gotten to the end of the line (received a newline + // character) and the line is blank, the http request has ended, + // so you can send a reply + if (c == '\n' && currentLineIsBlank) { + // send a standard http response header + client.println("HTTP/1.1 200 OK"); + client.println("Content-Type: text/html"); + client.println("Connection: close"); + client.println(); + client.println("<!DOCTYPE HTML>"); + client.println("<html>"); + // add a meta refresh tag, so the browser pulls again every 5 seconds: + client.println("<meta http-equiv=\"refresh\" content=\"5\">"); + // output the value of each analog input pin + for (int analogChannel = 0; analogChannel < 6; analogChannel++) { + int sensorReading = analogRead(analogChannel); + client.print("analog input "); + client.print(analogChannel); + client.print(" is "); + client.print(sensorReading); + client.println("<br />"); + } + client.println("</html>"); + break; + } + if (c == '\n') { + // you're starting a new line + currentLineIsBlank = true; + } + else if (c != '\r') { + // you've gotten a character on the current line + currentLineIsBlank = false; + } + } + } + // give the web browser time to receive the data + delay(1); + // close the connection: + client.stop(); + Serial.println("client disonnected"); + } +} + diff --git a/libraries/Ethernet/keywords.txt b/libraries/Ethernet/keywords.txt new file mode 100644 index 0000000..6b37cbe --- /dev/null +++ b/libraries/Ethernet/keywords.txt @@ -0,0 +1,37 @@ +####################################### +# Syntax Coloring Map For Ethernet +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +Ethernet KEYWORD1 +EthernetClient KEYWORD1 +EthernetServer KEYWORD1 +IPAddress KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +status KEYWORD2 +connect KEYWORD2 +write KEYWORD2 +available KEYWORD2 +read KEYWORD2 +peek KEYWORD2 +flush KEYWORD2 +stop KEYWORD2 +connected KEYWORD2 +begin KEYWORD2 +beginPacket KEYWORD2 +endPacket KEYWORD2 +parsePacket KEYWORD2 +remoteIP KEYWORD2 +remotePort KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/Ethernet/util.h b/libraries/Ethernet/util.h new file mode 100644 index 0000000..5042e82 --- /dev/null +++ b/libraries/Ethernet/util.h @@ -0,0 +1,13 @@ +#ifndef UTIL_H +#define UTIL_H + +#define htons(x) ( ((x)<<8) | (((x)>>8)&0xFF) ) +#define ntohs(x) htons(x) + +#define htonl(x) ( ((x)<<24 & 0xFF000000UL) | \ + ((x)<< 8 & 0x00FF0000UL) | \ + ((x)>> 8 & 0x0000FF00UL) | \ + ((x)>>24 & 0x000000FFUL) ) +#define ntohl(x) htonl(x) + +#endif diff --git a/libraries/Ethernet/utility/socket.cpp b/libraries/Ethernet/utility/socket.cpp new file mode 100644 index 0000000..fd3e442 --- /dev/null +++ b/libraries/Ethernet/utility/socket.cpp @@ -0,0 +1,400 @@ +#include "w5100.h" +#include "socket.h" + +static uint16_t local_port; + +/** + * @brief This Socket function initialize the channel in perticular mode, and set the port and wait for W5100 done it. + * @return 1 for success else 0. + */ +uint8_t socket(SOCKET s, uint8_t protocol, uint16_t port, uint8_t flag) +{ + if ((protocol == SnMR::TCP) || (protocol == SnMR::UDP) || (protocol == SnMR::IPRAW) || (protocol == SnMR::MACRAW) || (protocol == SnMR::PPPOE)) + { + close(s); + W5100.writeSnMR(s, protocol | flag); + if (port != 0) { + W5100.writeSnPORT(s, port); + } + else { + local_port++; // if don't set the source port, set local_port number. + W5100.writeSnPORT(s, local_port); + } + + W5100.execCmdSn(s, Sock_OPEN); + + return 1; + } + + return 0; +} + + +/** + * @brief This function close the socket and parameter is "s" which represent the socket number + */ +void close(SOCKET s) +{ + W5100.execCmdSn(s, Sock_CLOSE); + W5100.writeSnIR(s, 0xFF); +} + + +/** + * @brief This function established the connection for the channel in passive (server) mode. This function waits for the request from the peer. + * @return 1 for success else 0. + */ +uint8_t listen(SOCKET s) +{ + if (W5100.readSnSR(s) != SnSR::INIT) + return 0; + W5100.execCmdSn(s, Sock_LISTEN); + return 1; +} + + +/** + * @brief This function established the connection for the channel in Active (client) mode. + * This function waits for the untill the connection is established. + * + * @return 1 for success else 0. + */ +uint8_t connect(SOCKET s, uint8_t * addr, uint16_t port) +{ + if + ( + ((addr[0] == 0xFF) && (addr[1] == 0xFF) && (addr[2] == 0xFF) && (addr[3] == 0xFF)) || + ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) || + (port == 0x00) + ) + return 0; + + // set destination IP + W5100.writeSnDIPR(s, addr); + W5100.writeSnDPORT(s, port); + W5100.execCmdSn(s, Sock_CONNECT); + + return 1; +} + + + +/** + * @brief This function used for disconnect the socket and parameter is "s" which represent the socket number + * @return 1 for success else 0. + */ +void disconnect(SOCKET s) +{ + W5100.execCmdSn(s, Sock_DISCON); +} + + +/** + * @brief This function used to send the data in TCP mode + * @return 1 for success else 0. + */ +uint16_t send(SOCKET s, const uint8_t * buf, uint16_t len) +{ + uint8_t status=0; + uint16_t ret=0; + uint16_t freesize=0; + + if (len > W5100.SSIZE) + ret = W5100.SSIZE; // check size not to exceed MAX size. + else + ret = len; + + // if freebuf is available, start. + do + { + freesize = W5100.getTXFreeSize(s); + status = W5100.readSnSR(s); + if ((status != SnSR::ESTABLISHED) && (status != SnSR::CLOSE_WAIT)) + { + ret = 0; + break; + } + } + while (freesize < ret); + + // copy data + W5100.send_data_processing(s, (uint8_t *)buf, ret); + W5100.execCmdSn(s, Sock_SEND); + + /* +2008.01 bj */ + while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK ) + { + /* m2008.01 [bj] : reduce code */ + if ( W5100.readSnSR(s) == SnSR::CLOSED ) + { + close(s); + return 0; + } + } + /* +2008.01 bj */ + W5100.writeSnIR(s, SnIR::SEND_OK); + return ret; +} + + +/** + * @brief This function is an application I/F function which is used to receive the data in TCP mode. + * It continues to wait for data as much as the application wants to receive. + * + * @return received data size for success else -1. + */ +int16_t recv(SOCKET s, uint8_t *buf, int16_t len) +{ + // Check how much data is available + int16_t ret = W5100.getRXReceivedSize(s); + if ( ret == 0 ) + { + // No data available. + uint8_t status = W5100.readSnSR(s); + if ( status == SnSR::LISTEN || status == SnSR::CLOSED || status == SnSR::CLOSE_WAIT ) + { + // The remote end has closed its side of the connection, so this is the eof state + ret = 0; + } + else + { + // The connection is still up, but there's no data waiting to be read + ret = -1; + } + } + else if (ret > len) + { + ret = len; + } + + if ( ret > 0 ) + { + W5100.recv_data_processing(s, buf, ret); + W5100.execCmdSn(s, Sock_RECV); + } + return ret; +} + + +/** + * @brief Returns the first byte in the receive queue (no checking) + * + * @return + */ +uint16_t peek(SOCKET s, uint8_t *buf) +{ + W5100.recv_data_processing(s, buf, 1, 1); + + return 1; +} + + +/** + * @brief This function is an application I/F function which is used to send the data for other then TCP mode. + * Unlike TCP transmission, The peer's destination address and the port is needed. + * + * @return This function return send data size for success else -1. + */ +uint16_t sendto(SOCKET s, const uint8_t *buf, uint16_t len, uint8_t *addr, uint16_t port) +{ + uint16_t ret=0; + + if (len > W5100.SSIZE) ret = W5100.SSIZE; // check size not to exceed MAX size. + else ret = len; + + if + ( + ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) || + ((port == 0x00)) ||(ret == 0) + ) + { + /* +2008.01 [bj] : added return value */ + ret = 0; + } + else + { + W5100.writeSnDIPR(s, addr); + W5100.writeSnDPORT(s, port); + + // copy data + W5100.send_data_processing(s, (uint8_t *)buf, ret); + W5100.execCmdSn(s, Sock_SEND); + + /* +2008.01 bj */ + while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK ) + { + if (W5100.readSnIR(s) & SnIR::TIMEOUT) + { + /* +2008.01 [bj]: clear interrupt */ + W5100.writeSnIR(s, (SnIR::SEND_OK | SnIR::TIMEOUT)); /* clear SEND_OK & TIMEOUT */ + return 0; + } + } + + /* +2008.01 bj */ + W5100.writeSnIR(s, SnIR::SEND_OK); + } + return ret; +} + + +/** + * @brief This function is an application I/F function which is used to receive the data in other then + * TCP mode. This function is used to receive UDP, IP_RAW and MAC_RAW mode, and handle the header as well. + * + * @return This function return received data size for success else -1. + */ +uint16_t recvfrom(SOCKET s, uint8_t *buf, uint16_t len, uint8_t *addr, uint16_t *port) +{ + uint8_t head[8]; + uint16_t data_len=0; + uint16_t ptr=0; + + if ( len > 0 ) + { + ptr = W5100.readSnRX_RD(s); + switch (W5100.readSnMR(s) & 0x07) + { + case SnMR::UDP : + W5100.read_data(s, (uint8_t *)ptr, head, 0x08); + ptr += 8; + // read peer's IP address, port number. + addr[0] = head[0]; + addr[1] = head[1]; + addr[2] = head[2]; + addr[3] = head[3]; + *port = head[4]; + *port = (*port << 8) + head[5]; + data_len = head[6]; + data_len = (data_len << 8) + head[7]; + + W5100.read_data(s, (uint8_t *)ptr, buf, data_len); // data copy. + ptr += data_len; + + W5100.writeSnRX_RD(s, ptr); + break; + + case SnMR::IPRAW : + W5100.read_data(s, (uint8_t *)ptr, head, 0x06); + ptr += 6; + + addr[0] = head[0]; + addr[1] = head[1]; + addr[2] = head[2]; + addr[3] = head[3]; + data_len = head[4]; + data_len = (data_len << 8) + head[5]; + + W5100.read_data(s, (uint8_t *)ptr, buf, data_len); // data copy. + ptr += data_len; + + W5100.writeSnRX_RD(s, ptr); + break; + + case SnMR::MACRAW: + W5100.read_data(s,(uint8_t*)ptr,head,2); + ptr+=2; + data_len = head[0]; + data_len = (data_len<<8) + head[1] - 2; + + W5100.read_data(s,(uint8_t*) ptr,buf,data_len); + ptr += data_len; + W5100.writeSnRX_RD(s, ptr); + break; + + default : + break; + } + W5100.execCmdSn(s, Sock_RECV); + } + return data_len; +} + + +uint16_t igmpsend(SOCKET s, const uint8_t * buf, uint16_t len) +{ + uint8_t status=0; + uint16_t ret=0; + + if (len > W5100.SSIZE) + ret = W5100.SSIZE; // check size not to exceed MAX size. + else + ret = len; + + if (ret == 0) + return 0; + + W5100.send_data_processing(s, (uint8_t *)buf, ret); + W5100.execCmdSn(s, Sock_SEND); + + while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK ) + { + status = W5100.readSnSR(s); + if (W5100.readSnIR(s) & SnIR::TIMEOUT) + { + /* in case of igmp, if send fails, then socket closed */ + /* if you want change, remove this code. */ + close(s); + return 0; + } + } + + W5100.writeSnIR(s, SnIR::SEND_OK); + return ret; +} + +uint16_t bufferData(SOCKET s, uint16_t offset, const uint8_t* buf, uint16_t len) +{ + uint16_t ret =0; + if (len > W5100.getTXFreeSize(s)) + { + ret = W5100.getTXFreeSize(s); // check size not to exceed MAX size. + } + else + { + ret = len; + } + W5100.send_data_processing_offset(s, offset, buf, ret); + return ret; +} + +int startUDP(SOCKET s, uint8_t* addr, uint16_t port) +{ + if + ( + ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && (addr[3] == 0x00)) || + ((port == 0x00)) + ) + { + return 0; + } + else + { + W5100.writeSnDIPR(s, addr); + W5100.writeSnDPORT(s, port); + return 1; + } +} + +int sendUDP(SOCKET s) +{ + W5100.execCmdSn(s, Sock_SEND); + + /* +2008.01 bj */ + while ( (W5100.readSnIR(s) & SnIR::SEND_OK) != SnIR::SEND_OK ) + { + if (W5100.readSnIR(s) & SnIR::TIMEOUT) + { + /* +2008.01 [bj]: clear interrupt */ + W5100.writeSnIR(s, (SnIR::SEND_OK|SnIR::TIMEOUT)); + return 0; + } + } + + /* +2008.01 bj */ + W5100.writeSnIR(s, SnIR::SEND_OK); + + /* Sent ok */ + return 1; +} + diff --git a/libraries/Ethernet/utility/socket.h b/libraries/Ethernet/utility/socket.h new file mode 100644 index 0000000..45e0fb3 --- /dev/null +++ b/libraries/Ethernet/utility/socket.h @@ -0,0 +1,41 @@ +#ifndef _SOCKET_H_ +#define _SOCKET_H_ + +#include "w5100.h" + +extern uint8_t socket(SOCKET s, uint8_t protocol, uint16_t port, uint8_t flag); // Opens a socket(TCP or UDP or IP_RAW mode) +extern void close(SOCKET s); // Close socket +extern uint8_t connect(SOCKET s, uint8_t * addr, uint16_t port); // Establish TCP connection (Active connection) +extern void disconnect(SOCKET s); // disconnect the connection +extern uint8_t listen(SOCKET s); // Establish TCP connection (Passive connection) +extern uint16_t send(SOCKET s, const uint8_t * buf, uint16_t len); // Send data (TCP) +extern int16_t recv(SOCKET s, uint8_t * buf, int16_t len); // Receive data (TCP) +extern uint16_t peek(SOCKET s, uint8_t *buf); +extern uint16_t sendto(SOCKET s, const uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t port); // Send data (UDP/IP RAW) +extern uint16_t recvfrom(SOCKET s, uint8_t * buf, uint16_t len, uint8_t * addr, uint16_t *port); // Receive data (UDP/IP RAW) + +extern uint16_t igmpsend(SOCKET s, const uint8_t * buf, uint16_t len); + +// Functions to allow buffered UDP send (i.e. where the UDP datagram is built up over a +// number of calls before being sent +/* + @brief This function sets up a UDP datagram, the data for which will be provided by one + or more calls to bufferData and then finally sent with sendUDP. + @return 1 if the datagram was successfully set up, or 0 if there was an error +*/ +extern int startUDP(SOCKET s, uint8_t* addr, uint16_t port); +/* + @brief This function copies up to len bytes of data from buf into a UDP datagram to be + sent later by sendUDP. Allows datagrams to be built up from a series of bufferData calls. + @return Number of bytes successfully buffered +*/ +uint16_t bufferData(SOCKET s, uint16_t offset, const uint8_t* buf, uint16_t len); +/* + @brief Send a UDP datagram built up from a sequence of startUDP followed by one or more + calls to bufferData. + @return 1 if the datagram was successfully sent, or 0 if there was an error +*/ +int sendUDP(SOCKET s); + +#endif +/* _SOCKET_H_ */ diff --git a/libraries/Ethernet/utility/w5100.cpp b/libraries/Ethernet/utility/w5100.cpp new file mode 100644 index 0000000..9c748fd --- /dev/null +++ b/libraries/Ethernet/utility/w5100.cpp @@ -0,0 +1,188 @@ +/* + * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st> + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#include <stdio.h> +#include <string.h> +#include <avr/interrupt.h> + +#include "w5100.h" + +// W5100 controller instance +W5100Class W5100; + +#define TX_RX_MAX_BUF_SIZE 2048 +#define TX_BUF 0x1100 +#define RX_BUF (TX_BUF + TX_RX_MAX_BUF_SIZE) + +#define TXBUF_BASE 0x4000 +#define RXBUF_BASE 0x6000 + +void W5100Class::init(void) +{ + delay(300); + + SPI.begin(); + initSS(); + + writeMR(1<<RST); + writeTMSR(0x55); + writeRMSR(0x55); + + for (int i=0; i<MAX_SOCK_NUM; i++) { + SBASE[i] = TXBUF_BASE + SSIZE * i; + RBASE[i] = RXBUF_BASE + RSIZE * i; + } +} + +uint16_t W5100Class::getTXFreeSize(SOCKET s) +{ + uint16_t val=0, val1=0; + do { + val1 = readSnTX_FSR(s); + if (val1 != 0) + val = readSnTX_FSR(s); + } + while (val != val1); + return val; +} + +uint16_t W5100Class::getRXReceivedSize(SOCKET s) +{ + uint16_t val=0,val1=0; + do { + val1 = readSnRX_RSR(s); + if (val1 != 0) + val = readSnRX_RSR(s); + } + while (val != val1); + return val; +} + + +void W5100Class::send_data_processing(SOCKET s, const uint8_t *data, uint16_t len) +{ + // This is same as having no offset in a call to send_data_processing_offset + send_data_processing_offset(s, 0, data, len); +} + +void W5100Class::send_data_processing_offset(SOCKET s, uint16_t data_offset, const uint8_t *data, uint16_t len) +{ + uint16_t ptr = readSnTX_WR(s); + ptr += data_offset; + uint16_t offset = ptr & SMASK; + uint16_t dstAddr = offset + SBASE[s]; + + if (offset + len > SSIZE) + { + // Wrap around circular buffer + uint16_t size = SSIZE - offset; + write(dstAddr, data, size); + write(SBASE[s], data + size, len - size); + } + else { + write(dstAddr, data, len); + } + + ptr += len; + writeSnTX_WR(s, ptr); +} + + +void W5100Class::recv_data_processing(SOCKET s, uint8_t *data, uint16_t len, uint8_t peek) +{ + uint16_t ptr; + ptr = readSnRX_RD(s); + read_data(s, (uint8_t *)ptr, data, len); + if (!peek) + { + ptr += len; + writeSnRX_RD(s, ptr); + } +} + +void W5100Class::read_data(SOCKET s, volatile uint8_t *src, volatile uint8_t *dst, uint16_t len) +{ + uint16_t size; + uint16_t src_mask; + uint16_t src_ptr; + + src_mask = (uint16_t)src & RMASK; + src_ptr = RBASE[s] + src_mask; + + if( (src_mask + len) > RSIZE ) + { + size = RSIZE - src_mask; + read(src_ptr, (uint8_t *)dst, size); + dst += size; + read(RBASE[s], (uint8_t *) dst, len - size); + } + else + read(src_ptr, (uint8_t *) dst, len); +} + + +uint8_t W5100Class::write(uint16_t _addr, uint8_t _data) +{ + setSS(); + SPI.transfer(0xF0); + SPI.transfer(_addr >> 8); + SPI.transfer(_addr & 0xFF); + SPI.transfer(_data); + resetSS(); + return 1; +} + +uint16_t W5100Class::write(uint16_t _addr, const uint8_t *_buf, uint16_t _len) +{ + for (uint16_t i=0; i<_len; i++) + { + setSS(); + SPI.transfer(0xF0); + SPI.transfer(_addr >> 8); + SPI.transfer(_addr & 0xFF); + _addr++; + SPI.transfer(_buf[i]); + resetSS(); + } + return _len; +} + +uint8_t W5100Class::read(uint16_t _addr) +{ + setSS(); + SPI.transfer(0x0F); + SPI.transfer(_addr >> 8); + SPI.transfer(_addr & 0xFF); + uint8_t _data = SPI.transfer(0); + resetSS(); + return _data; +} + +uint16_t W5100Class::read(uint16_t _addr, uint8_t *_buf, uint16_t _len) +{ + for (uint16_t i=0; i<_len; i++) + { + setSS(); + SPI.transfer(0x0F); + SPI.transfer(_addr >> 8); + SPI.transfer(_addr & 0xFF); + _addr++; + _buf[i] = SPI.transfer(0); + resetSS(); + } + return _len; +} + +void W5100Class::execCmdSn(SOCKET s, SockCMD _cmd) { + // Send command to socket + writeSnCR(s, _cmd); + // Wait for command to complete + while (readSnCR(s)) + ; +} diff --git a/libraries/Ethernet/utility/w5100.h b/libraries/Ethernet/utility/w5100.h new file mode 100644 index 0000000..8dccd9f --- /dev/null +++ b/libraries/Ethernet/utility/w5100.h @@ -0,0 +1,404 @@ +/* + * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st> + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#ifndef W5100_H_INCLUDED +#define W5100_H_INCLUDED + +#include <avr/pgmspace.h> +#include <SPI.h> + +#define MAX_SOCK_NUM 4 + +typedef uint8_t SOCKET; + +#define IDM_OR 0x8000 +#define IDM_AR0 0x8001 +#define IDM_AR1 0x8002 +#define IDM_DR 0x8003 +/* +class MR { +public: + static const uint8_t RST = 0x80; + static const uint8_t PB = 0x10; + static const uint8_t PPPOE = 0x08; + static const uint8_t LB = 0x04; + static const uint8_t AI = 0x02; + static const uint8_t IND = 0x01; +}; +*/ +/* +class IR { +public: + static const uint8_t CONFLICT = 0x80; + static const uint8_t UNREACH = 0x40; + static const uint8_t PPPoE = 0x20; + static const uint8_t SOCK0 = 0x01; + static const uint8_t SOCK1 = 0x02; + static const uint8_t SOCK2 = 0x04; + static const uint8_t SOCK3 = 0x08; + static inline uint8_t SOCK(SOCKET ch) { return (0x01 << ch); }; +}; +*/ + +class SnMR { +public: + static const uint8_t CLOSE = 0x00; + static const uint8_t TCP = 0x01; + static const uint8_t UDP = 0x02; + static const uint8_t IPRAW = 0x03; + static const uint8_t MACRAW = 0x04; + static const uint8_t PPPOE = 0x05; + static const uint8_t ND = 0x20; + static const uint8_t MULTI = 0x80; +}; + +enum SockCMD { + Sock_OPEN = 0x01, + Sock_LISTEN = 0x02, + Sock_CONNECT = 0x04, + Sock_DISCON = 0x08, + Sock_CLOSE = 0x10, + Sock_SEND = 0x20, + Sock_SEND_MAC = 0x21, + Sock_SEND_KEEP = 0x22, + Sock_RECV = 0x40 +}; + +/*class SnCmd { +public: + static const uint8_t OPEN = 0x01; + static const uint8_t LISTEN = 0x02; + static const uint8_t CONNECT = 0x04; + static const uint8_t DISCON = 0x08; + static const uint8_t CLOSE = 0x10; + static const uint8_t SEND = 0x20; + static const uint8_t SEND_MAC = 0x21; + static const uint8_t SEND_KEEP = 0x22; + static const uint8_t RECV = 0x40; +}; +*/ + +class SnIR { +public: + static const uint8_t SEND_OK = 0x10; + static const uint8_t TIMEOUT = 0x08; + static const uint8_t RECV = 0x04; + static const uint8_t DISCON = 0x02; + static const uint8_t CON = 0x01; +}; + +class SnSR { +public: + static const uint8_t CLOSED = 0x00; + static const uint8_t INIT = 0x13; + static const uint8_t LISTEN = 0x14; + static const uint8_t SYNSENT = 0x15; + static const uint8_t SYNRECV = 0x16; + static const uint8_t ESTABLISHED = 0x17; + static const uint8_t FIN_WAIT = 0x18; + static const uint8_t CLOSING = 0x1A; + static const uint8_t TIME_WAIT = 0x1B; + static const uint8_t CLOSE_WAIT = 0x1C; + static const uint8_t LAST_ACK = 0x1D; + static const uint8_t UDP = 0x22; + static const uint8_t IPRAW = 0x32; + static const uint8_t MACRAW = 0x42; + static const uint8_t PPPOE = 0x5F; +}; + +class IPPROTO { +public: + static const uint8_t IP = 0; + static const uint8_t ICMP = 1; + static const uint8_t IGMP = 2; + static const uint8_t GGP = 3; + static const uint8_t TCP = 6; + static const uint8_t PUP = 12; + static const uint8_t UDP = 17; + static const uint8_t IDP = 22; + static const uint8_t ND = 77; + static const uint8_t RAW = 255; +}; + +class W5100Class { + +public: + void init(); + + /** + * @brief This function is being used for copy the data form Receive buffer of the chip to application buffer. + * + * It calculate the actual physical address where one has to read + * the data from Receive buffer. Here also take care of the condition while it exceed + * the Rx memory uper-bound of socket. + */ + void read_data(SOCKET s, volatile uint8_t * src, volatile uint8_t * dst, uint16_t len); + + /** + * @brief This function is being called by send() and sendto() function also. + * + * This function read the Tx write pointer register and after copy the data in buffer update the Tx write pointer + * register. User should read upper byte first and lower byte later to get proper value. + */ + void send_data_processing(SOCKET s, const uint8_t *data, uint16_t len); + /** + * @brief A copy of send_data_processing that uses the provided ptr for the + * write offset. Only needed for the "streaming" UDP API, where + * a single UDP packet is built up over a number of calls to + * send_data_processing_ptr, because TX_WR doesn't seem to get updated + * correctly in those scenarios + * @param ptr value to use in place of TX_WR. If 0, then the value is read + * in from TX_WR + * @return New value for ptr, to be used in the next call + */ +// FIXME Update documentation + void send_data_processing_offset(SOCKET s, uint16_t data_offset, const uint8_t *data, uint16_t len); + + /** + * @brief This function is being called by recv() also. + * + * This function read the Rx read pointer register + * and after copy the data from receive buffer update the Rx write pointer register. + * User should read upper byte first and lower byte later to get proper value. + */ + void recv_data_processing(SOCKET s, uint8_t *data, uint16_t len, uint8_t peek = 0); + + inline void setGatewayIp(uint8_t *_addr); + inline void getGatewayIp(uint8_t *_addr); + + inline void setSubnetMask(uint8_t *_addr); + inline void getSubnetMask(uint8_t *_addr); + + inline void setMACAddress(uint8_t * addr); + inline void getMACAddress(uint8_t * addr); + + inline void setIPAddress(uint8_t * addr); + inline void getIPAddress(uint8_t * addr); + + inline void setRetransmissionTime(uint16_t timeout); + inline void setRetransmissionCount(uint8_t _retry); + + void execCmdSn(SOCKET s, SockCMD _cmd); + + uint16_t getTXFreeSize(SOCKET s); + uint16_t getRXReceivedSize(SOCKET s); + + + // W5100 Registers + // --------------- +private: + static uint8_t write(uint16_t _addr, uint8_t _data); + static uint16_t write(uint16_t addr, const uint8_t *buf, uint16_t len); + static uint8_t read(uint16_t addr); + static uint16_t read(uint16_t addr, uint8_t *buf, uint16_t len); + +#define __GP_REGISTER8(name, address) \ + static inline void write##name(uint8_t _data) { \ + write(address, _data); \ + } \ + static inline uint8_t read##name() { \ + return read(address); \ + } +#define __GP_REGISTER16(name, address) \ + static void write##name(uint16_t _data) { \ + write(address, _data >> 8); \ + write(address+1, _data & 0xFF); \ + } \ + static uint16_t read##name() { \ + uint16_t res = read(address); \ + res = (res << 8) + read(address + 1); \ + return res; \ + } +#define __GP_REGISTER_N(name, address, size) \ + static uint16_t write##name(uint8_t *_buff) { \ + return write(address, _buff, size); \ + } \ + static uint16_t read##name(uint8_t *_buff) { \ + return read(address, _buff, size); \ + } + +public: + __GP_REGISTER8 (MR, 0x0000); // Mode + __GP_REGISTER_N(GAR, 0x0001, 4); // Gateway IP address + __GP_REGISTER_N(SUBR, 0x0005, 4); // Subnet mask address + __GP_REGISTER_N(SHAR, 0x0009, 6); // Source MAC address + __GP_REGISTER_N(SIPR, 0x000F, 4); // Source IP address + __GP_REGISTER8 (IR, 0x0015); // Interrupt + __GP_REGISTER8 (IMR, 0x0016); // Interrupt Mask + __GP_REGISTER16(RTR, 0x0017); // Timeout address + __GP_REGISTER8 (RCR, 0x0019); // Retry count + __GP_REGISTER8 (RMSR, 0x001A); // Receive memory size + __GP_REGISTER8 (TMSR, 0x001B); // Transmit memory size + __GP_REGISTER8 (PATR, 0x001C); // Authentication type address in PPPoE mode + __GP_REGISTER8 (PTIMER, 0x0028); // PPP LCP Request Timer + __GP_REGISTER8 (PMAGIC, 0x0029); // PPP LCP Magic Number + __GP_REGISTER_N(UIPR, 0x002A, 4); // Unreachable IP address in UDP mode + __GP_REGISTER16(UPORT, 0x002E); // Unreachable Port address in UDP mode + +#undef __GP_REGISTER8 +#undef __GP_REGISTER16 +#undef __GP_REGISTER_N + + // W5100 Socket registers + // ---------------------- +private: + static inline uint8_t readSn(SOCKET _s, uint16_t _addr); + static inline uint8_t writeSn(SOCKET _s, uint16_t _addr, uint8_t _data); + static inline uint16_t readSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t len); + static inline uint16_t writeSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t len); + + static const uint16_t CH_BASE = 0x0400; + static const uint16_t CH_SIZE = 0x0100; + +#define __SOCKET_REGISTER8(name, address) \ + static inline void write##name(SOCKET _s, uint8_t _data) { \ + writeSn(_s, address, _data); \ + } \ + static inline uint8_t read##name(SOCKET _s) { \ + return readSn(_s, address); \ + } +#define __SOCKET_REGISTER16(name, address) \ + static void write##name(SOCKET _s, uint16_t _data) { \ + writeSn(_s, address, _data >> 8); \ + writeSn(_s, address+1, _data & 0xFF); \ + } \ + static uint16_t read##name(SOCKET _s) { \ + uint16_t res = readSn(_s, address); \ + uint16_t res2 = readSn(_s,address + 1); \ + res = res << 8; \ + res2 = res2 & 0xFF; \ + res = res | res2; \ + return res; \ + } +#define __SOCKET_REGISTER_N(name, address, size) \ + static uint16_t write##name(SOCKET _s, uint8_t *_buff) { \ + return writeSn(_s, address, _buff, size); \ + } \ + static uint16_t read##name(SOCKET _s, uint8_t *_buff) { \ + return readSn(_s, address, _buff, size); \ + } + +public: + __SOCKET_REGISTER8(SnMR, 0x0000) // Mode + __SOCKET_REGISTER8(SnCR, 0x0001) // Command + __SOCKET_REGISTER8(SnIR, 0x0002) // Interrupt + __SOCKET_REGISTER8(SnSR, 0x0003) // Status + __SOCKET_REGISTER16(SnPORT, 0x0004) // Source Port + __SOCKET_REGISTER_N(SnDHAR, 0x0006, 6) // Destination Hardw Addr + __SOCKET_REGISTER_N(SnDIPR, 0x000C, 4) // Destination IP Addr + __SOCKET_REGISTER16(SnDPORT, 0x0010) // Destination Port + __SOCKET_REGISTER16(SnMSSR, 0x0012) // Max Segment Size + __SOCKET_REGISTER8(SnPROTO, 0x0014) // Protocol in IP RAW Mode + __SOCKET_REGISTER8(SnTOS, 0x0015) // IP TOS + __SOCKET_REGISTER8(SnTTL, 0x0016) // IP TTL + __SOCKET_REGISTER16(SnTX_FSR, 0x0020) // TX Free Size + __SOCKET_REGISTER16(SnTX_RD, 0x0022) // TX Read Pointer + __SOCKET_REGISTER16(SnTX_WR, 0x0024) // TX Write Pointer + __SOCKET_REGISTER16(SnRX_RSR, 0x0026) // RX Free Size + __SOCKET_REGISTER16(SnRX_RD, 0x0028) // RX Read Pointer + __SOCKET_REGISTER16(SnRX_WR, 0x002A) // RX Write Pointer (supported?) + +#undef __SOCKET_REGISTER8 +#undef __SOCKET_REGISTER16 +#undef __SOCKET_REGISTER_N + + +private: + static const uint8_t RST = 7; // Reset BIT + + static const int SOCKETS = 4; + static const uint16_t SMASK = 0x07FF; // Tx buffer MASK + static const uint16_t RMASK = 0x07FF; // Rx buffer MASK +public: + static const uint16_t SSIZE = 2048; // Max Tx buffer size +private: + static const uint16_t RSIZE = 2048; // Max Rx buffer size + uint16_t SBASE[SOCKETS]; // Tx buffer base address + uint16_t RBASE[SOCKETS]; // Rx buffer base address + +private: +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + inline static void initSS() { DDRB |= _BV(4); }; + inline static void setSS() { PORTB &= ~_BV(4); }; + inline static void resetSS() { PORTB |= _BV(4); }; +#elif defined(__AVR_ATmega32U4__) + inline static void initSS() { DDRB |= _BV(6); }; + inline static void setSS() { PORTB &= ~_BV(6); }; + inline static void resetSS() { PORTB |= _BV(6); }; +#elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB162__) + inline static void initSS() { DDRB |= _BV(0); }; + inline static void setSS() { PORTB &= ~_BV(0); }; + inline static void resetSS() { PORTB |= _BV(0); }; +#else + inline static void initSS() { DDRB |= _BV(2); }; + inline static void setSS() { PORTB &= ~_BV(2); }; + inline static void resetSS() { PORTB |= _BV(2); }; +#endif + +}; + +extern W5100Class W5100; + +uint8_t W5100Class::readSn(SOCKET _s, uint16_t _addr) { + return read(CH_BASE + _s * CH_SIZE + _addr); +} + +uint8_t W5100Class::writeSn(SOCKET _s, uint16_t _addr, uint8_t _data) { + return write(CH_BASE + _s * CH_SIZE + _addr, _data); +} + +uint16_t W5100Class::readSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t _len) { + return read(CH_BASE + _s * CH_SIZE + _addr, _buf, _len); +} + +uint16_t W5100Class::writeSn(SOCKET _s, uint16_t _addr, uint8_t *_buf, uint16_t _len) { + return write(CH_BASE + _s * CH_SIZE + _addr, _buf, _len); +} + +void W5100Class::getGatewayIp(uint8_t *_addr) { + readGAR(_addr); +} + +void W5100Class::setGatewayIp(uint8_t *_addr) { + writeGAR(_addr); +} + +void W5100Class::getSubnetMask(uint8_t *_addr) { + readSUBR(_addr); +} + +void W5100Class::setSubnetMask(uint8_t *_addr) { + writeSUBR(_addr); +} + +void W5100Class::getMACAddress(uint8_t *_addr) { + readSHAR(_addr); +} + +void W5100Class::setMACAddress(uint8_t *_addr) { + writeSHAR(_addr); +} + +void W5100Class::getIPAddress(uint8_t *_addr) { + readSIPR(_addr); +} + +void W5100Class::setIPAddress(uint8_t *_addr) { + writeSIPR(_addr); +} + +void W5100Class::setRetransmissionTime(uint16_t _timeout) { + writeRTR(_timeout); +} + +void W5100Class::setRetransmissionCount(uint8_t _retry) { + writeRCR(_retry); +} + +#endif diff --git a/libraries/Firmata/Boards.h b/libraries/Firmata/Boards.h new file mode 100644 index 0000000..06f69c6 --- /dev/null +++ b/libraries/Firmata/Boards.h @@ -0,0 +1,366 @@ +/* Boards.h - Hardware Abstraction Layer for Firmata library */ + +#ifndef Firmata_Boards_h +#define Firmata_Boards_h + +#include <inttypes.h> + +#if defined(ARDUINO) && ARDUINO >= 100 +#include "Arduino.h" // for digitalRead, digitalWrite, etc +#else +#include "WProgram.h" +#endif + +// Normally Servo.h must be included before Firmata.h (which then includes +// this file). If Servo.h wasn't included, this allows the code to still +// compile, but without support for any Servos. Hopefully that's what the +// user intended by not including Servo.h +#ifndef MAX_SERVOS +#define MAX_SERVOS 0 +#endif + +/* + Firmata Hardware Abstraction Layer + +Firmata is built on top of the hardware abstraction functions of Arduino, +specifically digitalWrite, digitalRead, analogWrite, analogRead, and +pinMode. While these functions offer simple integer pin numbers, Firmata +needs more information than is provided by Arduino. This file provides +all other hardware specific details. To make Firmata support a new board, +only this file should require editing. + +The key concept is every "pin" implemented by Firmata may be mapped to +any pin as implemented by Arduino. Usually a simple 1-to-1 mapping is +best, but such mapping should not be assumed. This hardware abstraction +layer allows Firmata to implement any number of pins which map onto the +Arduino implemented pins in almost any arbitrary way. + + +General Constants: + +These constants provide basic information Firmata requires. + +TOTAL_PINS: The total number of pins Firmata implemented by Firmata. + Usually this will match the number of pins the Arduino functions + implement, including any pins pins capable of analog or digital. + However, Firmata may implement any number of pins. For example, + on Arduino Mini with 8 analog inputs, 6 of these may be used + for digital functions, and 2 are analog only. On such boards, + Firmata can implement more pins than Arduino's pinMode() + function, in order to accommodate those special pins. The + Firmata protocol supports a maximum of 128 pins, so this + constant must not exceed 128. + +TOTAL_ANALOG_PINS: The total number of analog input pins implemented. + The Firmata protocol allows up to 16 analog inputs, accessed + using offsets 0 to 15. Because Firmata presents the analog + inputs using different offsets than the actual pin numbers + (a legacy of Arduino's analogRead function, and the way the + analog input capable pins are physically labeled on all + Arduino boards), the total number of analog input signals + must be specified. 16 is the maximum. + +VERSION_BLINK_PIN: When Firmata starts up, it will blink the version + number. This constant is the Arduino pin number where a + LED is connected. + + +Pin Mapping Macros: + +These macros provide the mapping between pins as implemented by +Firmata protocol and the actual pin numbers used by the Arduino +functions. Even though such mappings are often simple, pin +numbers received by Firmata protocol should always be used as +input to these macros, and the result of the macro should be +used with with any Arduino function. + +When Firmata is extended to support a new pin mode or feature, +a pair of macros should be added and used for all hardware +access. For simple 1:1 mapping, these macros add no actual +overhead, yet their consistent use allows source code which +uses them consistently to be easily adapted to all other boards +with different requirements. + +IS_PIN_XXXX(pin): The IS_PIN macros resolve to true or non-zero + if a pin as implemented by Firmata corresponds to a pin + that actually implements the named feature. + +PIN_TO_XXXX(pin): The PIN_TO macros translate pin numbers as + implemented by Firmata to the pin numbers needed as inputs + to the Arduino functions. The corresponding IS_PIN macro + should always be tested before using a PIN_TO macro, so + these macros only need to handle valid Firmata pin + numbers for the named feature. + + +Port Access Inline Funtions: + +For efficiency, Firmata protocol provides access to digital +input and output pins grouped by 8 bit ports. When these +groups of 8 correspond to actual 8 bit ports as implemented +by the hardware, these inline functions can provide high +speed direct port access. Otherwise, a default implementation +using 8 calls to digitalWrite or digitalRead is used. + +When porting Firmata to a new board, it is recommended to +use the default functions first and focus only on the constants +and macros above. When those are working, if optimized port +access is desired, these inline functions may be extended. +The recommended approach defines a symbol indicating which +optimization to use, and then conditional complication is +used within these functions. + +readPort(port, bitmask): Read an 8 bit port, returning the value. + port: The port number, Firmata pins port*8 to port*8+7 + bitmask: The actual pins to read, indicated by 1 bits. + +writePort(port, value, bitmask): Write an 8 bit port. + port: The port number, Firmata pins port*8 to port*8+7 + value: The 8 bit value to write + bitmask: The actual pins to write, indicated by 1 bits. +*/ + +/*============================================================================== + * Board Specific Configuration + *============================================================================*/ + +#ifndef digitalPinHasPWM +#define digitalPinHasPWM(p) IS_PIN_DIGITAL(p) +#endif + +// Arduino Duemilanove, Diecimila, and NG +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +#if defined(NUM_ANALOG_INPUTS) && NUM_ANALOG_INPUTS == 6 +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 20 // 14 digital + 6 analog +#else +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 22 // 14 digital + 8 analog +#endif +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) <= 19) +#define IS_PIN_ANALOG(p) ((p) >= 14 && (p) < 14 + TOTAL_ANALOG_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) (IS_PIN_DIGITAL(p) && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 18 || (p) == 19) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 14) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) +#define ARDUINO_PINOUT_OPTIMIZE 1 + + +// Wiring (and board) +#elif defined(WIRING) +#define VERSION_BLINK_PIN WLED +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= FIRST_ANALOG_PIN && (p) < (FIRST_ANALOG_PIN+TOTAL_ANALOG_PINS)) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == SDA || (p) == SCL) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - FIRST_ANALOG_PIN) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// old Arduinos +#elif defined(__AVR_ATmega8__) +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 20 // 14 digital + 6 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) <= 19) +#define IS_PIN_ANALOG(p) ((p) >= 14 && (p) <= 19) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) (IS_PIN_DIGITAL(p) && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 18 || (p) == 19) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 14) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) +#define ARDUINO_PINOUT_OPTIMIZE 1 + + +// Arduino Mega +#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define TOTAL_ANALOG_PINS 16 +#define TOTAL_PINS 70 // 54 digital + 16 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 54 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 2 && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 20 || (p) == 21) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 54) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// Teensy 1.0 +#elif defined(__AVR_AT90USB162__) +#define TOTAL_ANALOG_PINS 0 +#define TOTAL_PINS 21 // 21 digital + no analog +#define VERSION_BLINK_PIN 6 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) (0) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) (0) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Teensy 2.0 +#elif defined(__AVR_ATmega32U4__) +#define TOTAL_ANALOG_PINS 12 +#define TOTAL_PINS 25 // 11 digital + 12 analog +#define VERSION_BLINK_PIN 11 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 11 && (p) <= 22) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 5 || (p) == 6) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) (((p)<22)?21-(p):11) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Teensy++ 1.0 and 2.0 +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 46 // 38 digital + 8 analog +#define VERSION_BLINK_PIN 6 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 38 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 0 || (p) == 1) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 38) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Sanguino +#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 32 // 24 digital + 8 analog +#define VERSION_BLINK_PIN 0 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 24 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 16 || (p) == 17) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 24) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// Illuminato +#elif defined(__AVR_ATmega645__) +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 42 // 36 digital + 6 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 36 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) digitalPinHasPWM(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) ((p) == 4 || (p) == 5) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 36) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// anything else +#else +#error "Please edit Boards.h with a hardware abstraction for this board" +#endif + + +/*============================================================================== + * readPort() - Read an 8 bit port + *============================================================================*/ + +static inline unsigned char readPort(byte, byte) __attribute__((always_inline, unused)); +static inline unsigned char readPort(byte port, byte bitmask) +{ +#if defined(ARDUINO_PINOUT_OPTIMIZE) + if (port == 0) return (PIND & 0xFC) & bitmask; // ignore Rx/Tx 0/1 + if (port == 1) return ((PINB & 0x3F) | ((PINC & 0x03) << 6)) & bitmask; + if (port == 2) return ((PINC & 0x3C) >> 2) & bitmask; + return 0; +#else + unsigned char out=0, pin=port*8; + if (IS_PIN_DIGITAL(pin+0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin+0))) out |= 0x01; + if (IS_PIN_DIGITAL(pin+1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin+1))) out |= 0x02; + if (IS_PIN_DIGITAL(pin+2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin+2))) out |= 0x04; + if (IS_PIN_DIGITAL(pin+3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin+3))) out |= 0x08; + if (IS_PIN_DIGITAL(pin+4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin+4))) out |= 0x10; + if (IS_PIN_DIGITAL(pin+5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin+5))) out |= 0x20; + if (IS_PIN_DIGITAL(pin+6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin+6))) out |= 0x40; + if (IS_PIN_DIGITAL(pin+7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin+7))) out |= 0x80; + return out; +#endif +} + +/*============================================================================== + * writePort() - Write an 8 bit port, only touch pins specified by a bitmask + *============================================================================*/ + +static inline unsigned char writePort(byte, byte, byte) __attribute__((always_inline, unused)); +static inline unsigned char writePort(byte port, byte value, byte bitmask) +{ +#if defined(ARDUINO_PINOUT_OPTIMIZE) + if (port == 0) { + bitmask = bitmask & 0xFC; // do not touch Tx & Rx pins + byte valD = value & bitmask; + byte maskD = ~bitmask; + cli(); + PORTD = (PORTD & maskD) | valD; + sei(); + } else if (port == 1) { + byte valB = (value & bitmask) & 0x3F; + byte valC = (value & bitmask) >> 6; + byte maskB = ~(bitmask & 0x3F); + byte maskC = ~((bitmask & 0xC0) >> 6); + cli(); + PORTB = (PORTB & maskB) | valB; + PORTC = (PORTC & maskC) | valC; + sei(); + } else if (port == 2) { + bitmask = bitmask & 0x0F; + byte valC = (value & bitmask) << 2; + byte maskC = ~(bitmask << 2); + cli(); + PORTC = (PORTC & maskC) | valC; + sei(); + } +#else + byte pin=port*8; + if ((bitmask & 0x01)) digitalWrite(PIN_TO_DIGITAL(pin+0), (value & 0x01)); + if ((bitmask & 0x02)) digitalWrite(PIN_TO_DIGITAL(pin+1), (value & 0x02)); + if ((bitmask & 0x04)) digitalWrite(PIN_TO_DIGITAL(pin+2), (value & 0x04)); + if ((bitmask & 0x08)) digitalWrite(PIN_TO_DIGITAL(pin+3), (value & 0x08)); + if ((bitmask & 0x10)) digitalWrite(PIN_TO_DIGITAL(pin+4), (value & 0x10)); + if ((bitmask & 0x20)) digitalWrite(PIN_TO_DIGITAL(pin+5), (value & 0x20)); + if ((bitmask & 0x40)) digitalWrite(PIN_TO_DIGITAL(pin+6), (value & 0x40)); + if ((bitmask & 0x80)) digitalWrite(PIN_TO_DIGITAL(pin+7), (value & 0x80)); +#endif +} + + + + +#ifndef TOTAL_PORTS +#define TOTAL_PORTS ((TOTAL_PINS + 7) / 8) +#endif + + +#endif /* Firmata_Boards_h */ + diff --git a/libraries/Firmata/Firmata.cpp b/libraries/Firmata/Firmata.cpp new file mode 100644 index 0000000..36f8ed1 --- /dev/null +++ b/libraries/Firmata/Firmata.cpp @@ -0,0 +1,444 @@ +/* + Firmata.cpp - Firmata library + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. +*/ + +//****************************************************************************** +//* Includes +//****************************************************************************** + +#include "Firmata.h" +#include "HardwareSerial.h" + +extern "C" { +#include <string.h> +#include <stdlib.h> +} + +//****************************************************************************** +//* Support Functions +//****************************************************************************** + +void FirmataClass::sendValueAsTwo7bitBytes(int value) +{ + FirmataSerial.write(value & B01111111); // LSB + FirmataSerial.write(value >> 7 & B01111111); // MSB +} + +void FirmataClass::startSysex(void) +{ + FirmataSerial.write(START_SYSEX); +} + +void FirmataClass::endSysex(void) +{ + FirmataSerial.write(END_SYSEX); +} + +//****************************************************************************** +//* Constructors +//****************************************************************************** + +FirmataClass::FirmataClass(Stream &s) : FirmataSerial(s) +{ + firmwareVersionCount = 0; + systemReset(); +} + +//****************************************************************************** +//* Public Methods +//****************************************************************************** + +/* begin method for overriding default serial bitrate */ +void FirmataClass::begin(void) +{ + begin(57600); +} + +/* begin method for overriding default serial bitrate */ +void FirmataClass::begin(long speed) +{ + Serial.begin(speed); + FirmataSerial = Serial; + blinkVersion(); + printVersion(); + printFirmwareVersion(); +} + +void FirmataClass::begin(Stream &s) +{ + FirmataSerial = s; + systemReset(); + printVersion(); + printFirmwareVersion(); +} + +// output the protocol version message to the serial port +void FirmataClass::printVersion(void) { + FirmataSerial.write(REPORT_VERSION); + FirmataSerial.write(FIRMATA_MAJOR_VERSION); + FirmataSerial.write(FIRMATA_MINOR_VERSION); +} + +void FirmataClass::blinkVersion(void) +{ + // flash the pin with the protocol version + pinMode(VERSION_BLINK_PIN,OUTPUT); + pin13strobe(FIRMATA_MAJOR_VERSION, 40, 210); + delay(250); + pin13strobe(FIRMATA_MINOR_VERSION, 40, 210); + delay(125); +} + +void FirmataClass::printFirmwareVersion(void) +{ + byte i; + + if(firmwareVersionCount) { // make sure that the name has been set before reporting + startSysex(); + FirmataSerial.write(REPORT_FIRMWARE); + FirmataSerial.write(firmwareVersionVector[0]); // major version number + FirmataSerial.write(firmwareVersionVector[1]); // minor version number + for(i=2; i<firmwareVersionCount; ++i) { + sendValueAsTwo7bitBytes(firmwareVersionVector[i]); + } + endSysex(); + } +} + +void FirmataClass::setFirmwareNameAndVersion(const char *name, byte major, byte minor) +{ + const char *filename; + char *extension; + + // parse out ".cpp" and "applet/" that comes from using __FILE__ + extension = strstr(name, ".cpp"); + filename = strrchr(name, '/') + 1; //points to slash, +1 gets to start of filename + // add two bytes for version numbers + if(extension && filename) { + firmwareVersionCount = extension - filename + 2; + } else { + firmwareVersionCount = strlen(name) + 2; + filename = name; + } + firmwareVersionVector = (byte *) malloc(firmwareVersionCount); + firmwareVersionVector[firmwareVersionCount] = 0; + firmwareVersionVector[0] = major; + firmwareVersionVector[1] = minor; + strncpy((char*)firmwareVersionVector + 2, filename, firmwareVersionCount - 2); + // alas, no snprintf on Arduino + // snprintf(firmwareVersionVector, MAX_DATA_BYTES, "%c%c%s", + // (char)major, (char)minor, firmwareVersionVector); +} + +//------------------------------------------------------------------------------ +// Serial Receive Handling + +int FirmataClass::available(void) +{ + return FirmataSerial.available(); +} + + +void FirmataClass::processSysexMessage(void) +{ + switch(storedInputData[0]) { //first byte in buffer is command + case REPORT_FIRMWARE: + printFirmwareVersion(); + break; + case STRING_DATA: + if(currentStringCallback) { + byte bufferLength = (sysexBytesRead - 1) / 2; + char *buffer = (char*)malloc(bufferLength * sizeof(char)); + byte i = 1; + byte j = 0; + while(j < bufferLength) { + buffer[j] = (char)storedInputData[i]; + i++; + buffer[j] += (char)(storedInputData[i] << 7); + i++; + j++; + } + (*currentStringCallback)(buffer); + } + break; + default: + if(currentSysexCallback) + (*currentSysexCallback)(storedInputData[0], sysexBytesRead - 1, storedInputData + 1); + } +} + +void FirmataClass::processInput(void) +{ + int inputData = FirmataSerial.read(); // this is 'int' to handle -1 when no data + int command; + + // TODO make sure it handles -1 properly + + if (parsingSysex) { + if(inputData == END_SYSEX) { + //stop sysex byte + parsingSysex = false; + //fire off handler function + processSysexMessage(); + } else { + //normal data byte - add to buffer + storedInputData[sysexBytesRead] = inputData; + sysexBytesRead++; + } + } else if( (waitForData > 0) && (inputData < 128) ) { + waitForData--; + storedInputData[waitForData] = inputData; + if( (waitForData==0) && executeMultiByteCommand ) { // got the whole message + switch(executeMultiByteCommand) { + case ANALOG_MESSAGE: + if(currentAnalogCallback) { + (*currentAnalogCallback)(multiByteChannel, + (storedInputData[0] << 7) + + storedInputData[1]); + } + break; + case DIGITAL_MESSAGE: + if(currentDigitalCallback) { + (*currentDigitalCallback)(multiByteChannel, + (storedInputData[0] << 7) + + storedInputData[1]); + } + break; + case SET_PIN_MODE: + if(currentPinModeCallback) + (*currentPinModeCallback)(storedInputData[1], storedInputData[0]); + break; + case REPORT_ANALOG: + if(currentReportAnalogCallback) + (*currentReportAnalogCallback)(multiByteChannel,storedInputData[0]); + break; + case REPORT_DIGITAL: + if(currentReportDigitalCallback) + (*currentReportDigitalCallback)(multiByteChannel,storedInputData[0]); + break; + } + executeMultiByteCommand = 0; + } + } else { + // remove channel info from command byte if less than 0xF0 + if(inputData < 0xF0) { + command = inputData & 0xF0; + multiByteChannel = inputData & 0x0F; + } else { + command = inputData; + // commands in the 0xF* range don't use channel data + } + switch (command) { + case ANALOG_MESSAGE: + case DIGITAL_MESSAGE: + case SET_PIN_MODE: + waitForData = 2; // two data bytes needed + executeMultiByteCommand = command; + break; + case REPORT_ANALOG: + case REPORT_DIGITAL: + waitForData = 1; // one data byte needed + executeMultiByteCommand = command; + break; + case START_SYSEX: + parsingSysex = true; + sysexBytesRead = 0; + break; + case SYSTEM_RESET: + systemReset(); + break; + case REPORT_VERSION: + Firmata.printVersion(); + break; + } + } +} + +//------------------------------------------------------------------------------ +// Serial Send Handling + +// send an analog message +void FirmataClass::sendAnalog(byte pin, int value) +{ + // pin can only be 0-15, so chop higher bits + FirmataSerial.write(ANALOG_MESSAGE | (pin & 0xF)); + sendValueAsTwo7bitBytes(value); +} + +// send a single digital pin in a digital message +void FirmataClass::sendDigital(byte pin, int value) +{ + /* TODO add single pin digital messages to the protocol, this needs to + * track the last digital data sent so that it can be sure to change just + * one bit in the packet. This is complicated by the fact that the + * numbering of the pins will probably differ on Arduino, Wiring, and + * other boards. The DIGITAL_MESSAGE sends 14 bits at a time, but it is + * probably easier to send 8 bit ports for any board with more than 14 + * digital pins. + */ + + // TODO: the digital message should not be sent on the serial port every + // time sendDigital() is called. Instead, it should add it to an int + // which will be sent on a schedule. If a pin changes more than once + // before the digital message is sent on the serial port, it should send a + // digital message for each change. + + // if(value == 0) + // sendDigitalPortPair(); +} + + +// send 14-bits in a single digital message (protocol v1) +// send an 8-bit port in a single digital message (protocol v2) +void FirmataClass::sendDigitalPort(byte portNumber, int portData) +{ + FirmataSerial.write(DIGITAL_MESSAGE | (portNumber & 0xF)); + FirmataSerial.write((byte)portData % 128); // Tx bits 0-6 + FirmataSerial.write(portData >> 7); // Tx bits 7-13 +} + + +void FirmataClass::sendSysex(byte command, byte bytec, byte* bytev) +{ + byte i; + startSysex(); + FirmataSerial.write(command); + for(i=0; i<bytec; i++) { + sendValueAsTwo7bitBytes(bytev[i]); + } + endSysex(); +} + +void FirmataClass::sendString(byte command, const char* string) +{ + sendSysex(command, strlen(string), (byte *)string); +} + + +// send a string as the protocol string type +void FirmataClass::sendString(const char* string) +{ + sendString(STRING_DATA, string); +} + + +// Internal Actions///////////////////////////////////////////////////////////// + +// generic callbacks +void FirmataClass::attach(byte command, callbackFunction newFunction) +{ + switch(command) { + case ANALOG_MESSAGE: currentAnalogCallback = newFunction; break; + case DIGITAL_MESSAGE: currentDigitalCallback = newFunction; break; + case REPORT_ANALOG: currentReportAnalogCallback = newFunction; break; + case REPORT_DIGITAL: currentReportDigitalCallback = newFunction; break; + case SET_PIN_MODE: currentPinModeCallback = newFunction; break; + } +} + +void FirmataClass::attach(byte command, systemResetCallbackFunction newFunction) +{ + switch(command) { + case SYSTEM_RESET: currentSystemResetCallback = newFunction; break; + } +} + +void FirmataClass::attach(byte command, stringCallbackFunction newFunction) +{ + switch(command) { + case STRING_DATA: currentStringCallback = newFunction; break; + } +} + +void FirmataClass::attach(byte command, sysexCallbackFunction newFunction) +{ + currentSysexCallback = newFunction; +} + +void FirmataClass::detach(byte command) +{ + switch(command) { + case SYSTEM_RESET: currentSystemResetCallback = NULL; break; + case STRING_DATA: currentStringCallback = NULL; break; + case START_SYSEX: currentSysexCallback = NULL; break; + default: + attach(command, (callbackFunction)NULL); + } +} + +// sysex callbacks +/* + * this is too complicated for analogReceive, but maybe for Sysex? + void FirmataClass::attachSysex(sysexFunction newFunction) + { + byte i; + byte tmpCount = analogReceiveFunctionCount; + analogReceiveFunction* tmpArray = analogReceiveFunctionArray; + analogReceiveFunctionCount++; + analogReceiveFunctionArray = (analogReceiveFunction*) calloc(analogReceiveFunctionCount, sizeof(analogReceiveFunction)); + for(i = 0; i < tmpCount; i++) { + analogReceiveFunctionArray[i] = tmpArray[i]; + } + analogReceiveFunctionArray[tmpCount] = newFunction; + free(tmpArray); + } +*/ + +//****************************************************************************** +//* Private Methods +//****************************************************************************** + + + +// resets the system state upon a SYSTEM_RESET message from the host software +void FirmataClass::systemReset(void) +{ + byte i; + + waitForData = 0; // this flag says the next serial input will be data + executeMultiByteCommand = 0; // execute this after getting multi-byte data + multiByteChannel = 0; // channel data for multiByteCommands + + + for(i=0; i<MAX_DATA_BYTES; i++) { + storedInputData[i] = 0; + } + + parsingSysex = false; + sysexBytesRead = 0; + + if(currentSystemResetCallback) + (*currentSystemResetCallback)(); + + //flush(); //TODO uncomment when Firmata is a subclass of HardwareSerial +} + + + +// ============================================================================= +// used for flashing the pin for the version number +void FirmataClass::pin13strobe(int count, int onInterval, int offInterval) +{ + byte i; + pinMode(VERSION_BLINK_PIN, OUTPUT); + for(i=0; i<count; i++) { + delay(offInterval); + digitalWrite(VERSION_BLINK_PIN, HIGH); + delay(onInterval); + digitalWrite(VERSION_BLINK_PIN, LOW); + } +} + + +// make one instance for the user to use +FirmataClass Firmata(Serial); + + diff --git a/libraries/Firmata/Firmata.h b/libraries/Firmata/Firmata.h new file mode 100644 index 0000000..74f1ccc --- /dev/null +++ b/libraries/Firmata/Firmata.h @@ -0,0 +1,163 @@ +/* + Firmata.h - Firmata library + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. +*/ + +#ifndef Firmata_h +#define Firmata_h + +#include "Boards.h" /* Hardware Abstraction Layer + Wiring/Arduino */ + +/* Version numbers for the protocol. The protocol is still changing, so these + * version numbers are important. This number can be queried so that host + * software can test whether it will be compatible with the currently + * installed firmware. */ +#define FIRMATA_MAJOR_VERSION 2 // for non-compatible changes +#define FIRMATA_MINOR_VERSION 3 // for backwards compatible changes +#define FIRMATA_BUGFIX_VERSION 1 // for bugfix releases + +#define MAX_DATA_BYTES 32 // max number of data bytes in non-Sysex messages + +// message command bytes (128-255/0x80-0xFF) +#define DIGITAL_MESSAGE 0x90 // send data for a digital pin +#define ANALOG_MESSAGE 0xE0 // send data for an analog pin (or PWM) +#define REPORT_ANALOG 0xC0 // enable analog input by pin # +#define REPORT_DIGITAL 0xD0 // enable digital input by port pair +// +#define SET_PIN_MODE 0xF4 // set a pin to INPUT/OUTPUT/PWM/etc +// +#define REPORT_VERSION 0xF9 // report protocol version +#define SYSTEM_RESET 0xFF // reset from MIDI +// +#define START_SYSEX 0xF0 // start a MIDI Sysex message +#define END_SYSEX 0xF7 // end a MIDI Sysex message + +// extended command set using sysex (0-127/0x00-0x7F) +/* 0x00-0x0F reserved for user-defined commands */ +#define SERVO_CONFIG 0x70 // set max angle, minPulse, maxPulse, freq +#define STRING_DATA 0x71 // a string message with 14-bits per char +#define SHIFT_DATA 0x75 // a bitstream to/from a shift register +#define I2C_REQUEST 0x76 // send an I2C read/write request +#define I2C_REPLY 0x77 // a reply to an I2C read request +#define I2C_CONFIG 0x78 // config I2C settings such as delay times and power pins +#define EXTENDED_ANALOG 0x6F // analog write (PWM, Servo, etc) to any pin +#define PIN_STATE_QUERY 0x6D // ask for a pin's current mode and value +#define PIN_STATE_RESPONSE 0x6E // reply with pin's current mode and value +#define CAPABILITY_QUERY 0x6B // ask for supported modes and resolution of all pins +#define CAPABILITY_RESPONSE 0x6C // reply with supported modes and resolution +#define ANALOG_MAPPING_QUERY 0x69 // ask for mapping of analog to pin numbers +#define ANALOG_MAPPING_RESPONSE 0x6A // reply with mapping info +#define REPORT_FIRMWARE 0x79 // report name and version of the firmware +#define SAMPLING_INTERVAL 0x7A // set the poll rate of the main loop +#define SYSEX_NON_REALTIME 0x7E // MIDI Reserved for non-realtime messages +#define SYSEX_REALTIME 0x7F // MIDI Reserved for realtime messages +// these are DEPRECATED to make the naming more consistent +#define FIRMATA_STRING 0x71 // same as STRING_DATA +#define SYSEX_I2C_REQUEST 0x76 // same as I2C_REQUEST +#define SYSEX_I2C_REPLY 0x77 // same as I2C_REPLY +#define SYSEX_SAMPLING_INTERVAL 0x7A // same as SAMPLING_INTERVAL + +// pin modes +//#define INPUT 0x00 // defined in wiring.h +//#define OUTPUT 0x01 // defined in wiring.h +#define ANALOG 0x02 // analog pin in analogInput mode +#define PWM 0x03 // digital pin in PWM output mode +#define SERVO 0x04 // digital pin in Servo output mode +#define SHIFT 0x05 // shiftIn/shiftOut mode +#define I2C 0x06 // pin included in I2C setup +#define TOTAL_PIN_MODES 7 + +extern "C" { +// callback function types + typedef void (*callbackFunction)(byte, int); + typedef void (*systemResetCallbackFunction)(void); + typedef void (*stringCallbackFunction)(char*); + typedef void (*sysexCallbackFunction)(byte command, byte argc, byte*argv); +} + + +// TODO make it a subclass of a generic Serial/Stream base class +class FirmataClass +{ +public: + FirmataClass(Stream &s); +/* Arduino constructors */ + void begin(); + void begin(long); + void begin(Stream &s); +/* querying functions */ + void printVersion(void); + void blinkVersion(void); + void printFirmwareVersion(void); + //void setFirmwareVersion(byte major, byte minor); // see macro below + void setFirmwareNameAndVersion(const char *name, byte major, byte minor); +/* serial receive handling */ + int available(void); + void processInput(void); +/* serial send handling */ + void sendAnalog(byte pin, int value); + void sendDigital(byte pin, int value); // TODO implement this + void sendDigitalPort(byte portNumber, int portData); + void sendString(const char* string); + void sendString(byte command, const char* string); + void sendSysex(byte command, byte bytec, byte* bytev); +/* attach & detach callback functions to messages */ + void attach(byte command, callbackFunction newFunction); + void attach(byte command, systemResetCallbackFunction newFunction); + void attach(byte command, stringCallbackFunction newFunction); + void attach(byte command, sysexCallbackFunction newFunction); + void detach(byte command); + +private: + Stream &FirmataSerial; +/* firmware name and version */ + byte firmwareVersionCount; + byte *firmwareVersionVector; +/* input message handling */ + byte waitForData; // this flag says the next serial input will be data + byte executeMultiByteCommand; // execute this after getting multi-byte data + byte multiByteChannel; // channel data for multiByteCommands + byte storedInputData[MAX_DATA_BYTES]; // multi-byte data +/* sysex */ + boolean parsingSysex; + int sysexBytesRead; +/* callback functions */ + callbackFunction currentAnalogCallback; + callbackFunction currentDigitalCallback; + callbackFunction currentReportAnalogCallback; + callbackFunction currentReportDigitalCallback; + callbackFunction currentPinModeCallback; + systemResetCallbackFunction currentSystemResetCallback; + stringCallbackFunction currentStringCallback; + sysexCallbackFunction currentSysexCallback; + +/* private methods ------------------------------ */ + void processSysexMessage(void); + void systemReset(void); + void pin13strobe(int count, int onInterval, int offInterval); + void sendValueAsTwo7bitBytes(int value); + void startSysex(void); + void endSysex(void); +}; + +extern FirmataClass Firmata; + +/*============================================================================== + * MACROS + *============================================================================*/ + +/* shortcut for setFirmwareNameAndVersion() that uses __FILE__ to set the + * firmware name. It needs to be a macro so that __FILE__ is included in the + * firmware source file rather than the library source file. + */ +#define setFirmwareVersion(x, y) setFirmwareNameAndVersion(__FILE__, x, y) + +#endif /* Firmata_h */ + diff --git a/libraries/Firmata/LICENSE.txt b/libraries/Firmata/LICENSE.txt new file mode 100644 index 0000000..77cec6d --- /dev/null +++ b/libraries/Firmata/LICENSE.txt @@ -0,0 +1,458 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + diff --git a/libraries/Firmata/TODO.txt b/libraries/Firmata/TODO.txt new file mode 100644 index 0000000..86c9858 --- /dev/null +++ b/libraries/Firmata/TODO.txt @@ -0,0 +1,14 @@ + +- make Firmata a subclass of HardwareSerial + +- per-pin digital callback, since the per-port callback is a bit complicated + for beginners (maybe Firmata is not for beginners...) + +- simplify SimpleDigitalFirmata, take out the code that checks to see if the + data has changed, since it is a bit complicated for this example. Ideally + this example would be based on a call + +- turn current SimpleDigitalFirmata into DigitalPortFirmata for a more complex + example using the code which checks for changes before doing anything + +- test integration with Wiring diff --git a/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino b/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino new file mode 100644 index 0000000..bff7366 --- /dev/null +++ b/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino @@ -0,0 +1,90 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* + * This firmware reads all inputs and sends them as fast as it can. It was + * inspired by the ease-of-use of the Arduino2Max program. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte pin; + +int analogValue; +int previousAnalogValues[TOTAL_ANALOG_PINS]; + +byte portStatus[TOTAL_PORTS]; // each bit: 1=pin is digital input, 0=other/ignore +byte previousPINs[TOTAL_PORTS]; + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +/* make sure that the FTDI buffer doesn't go over 60 bytes, otherwise you + get long, random delays. So only read analogs every 20ms or so */ +int samplingInterval = 19; // how often to run the main loop (in ms) + +void sendPort(byte portNumber, byte portValue) +{ + portValue = portValue & portStatus[portNumber]; + if(previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + } +} + +void setup() +{ + byte i, port, status; + + Firmata.setFirmwareVersion(0, 1); + + for(pin = 0; pin < TOTAL_PINS; pin++) { + if IS_PIN_DIGITAL(pin) pinMode(PIN_TO_DIGITAL(pin), INPUT); + } + + for (port=0; port<TOTAL_PORTS; port++) { + status = 0; + for (i=0; i<8; i++) { + if (IS_PIN_DIGITAL(port * 8 + i)) status |= (1 << i); + } + portStatus[port] = status; + } + + Firmata.begin(57600); +} + +void loop() +{ + byte i; + + for (i=0; i<TOTAL_PORTS; i++) { + sendPort(i, readPort(i, 0xff)); + } + /* make sure that the FTDI buffer doesn't go over 60 bytes, otherwise you + get long, random delays. So only read analogs every 20ms or so */ + currentMillis = millis(); + if(currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + while(Firmata.available()) { + Firmata.processInput(); + } + for(pin = 0; pin < TOTAL_ANALOG_PINS; pin++) { + analogValue = analogRead(pin); + if(analogValue != previousAnalogValues[pin]) { + Firmata.sendAnalog(pin, analogValue); + previousAnalogValues[pin] = analogValue; + } + } + } +} + + diff --git a/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino b/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino new file mode 100644 index 0000000..ff1d664 --- /dev/null +++ b/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino @@ -0,0 +1,94 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* This firmware supports as many analog ports as possible, all analog inputs, + * four PWM outputs, and two with servo support. + * + * This example code is in the public domain. + */ +#include <Servo.h> +#include <Firmata.h> + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* servos */ +Servo servo9, servo10; // one instance per pin +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting +int analogPin = 0; // counter for reading analog pins +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis + + +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void analogWriteCallback(byte pin, int value) +{ + switch(pin) { + case 9: servo9.write(value); break; + case 10: servo10.write(value); break; + case 3: + case 5: + case 6: + case 11: // PWM pins + analogWrite(pin, value); + break; + } +} +// ----------------------------------------------------------------------------- +// sets bits in a bit array (int) to toggle the reporting of the analogIns +void reportAnalogCallback(byte pin, int value) +{ + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << pin); + } + else { // everything but 0 enables reporting of that pin + analogInputsToReport = analogInputsToReport | (1 << pin); + } + // TODO: save status to EEPROM here, if changed +} + +/*============================================================================== + * SETUP() + *============================================================================*/ +void setup() +{ + Firmata.setFirmwareVersion(0, 2); + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + + servo9.attach(9); + servo10.attach(10); + Firmata.begin(57600); +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ + while(Firmata.available()) + Firmata.processInput(); + currentMillis = millis(); + if(currentMillis - previousMillis > 20) { + previousMillis += 20; // run this every 20ms + for(analogPin=0;analogPin<TOTAL_ANALOG_PINS;analogPin++) { + if( analogInputsToReport & (1 << analogPin) ) + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } +} + diff --git a/libraries/Firmata/examples/EchoString/EchoString.ino b/libraries/Firmata/examples/EchoString/EchoString.ino new file mode 100644 index 0000000..5079697 --- /dev/null +++ b/libraries/Firmata/examples/EchoString/EchoString.ino @@ -0,0 +1,46 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* This sketch accepts strings and raw sysex messages and echos them back. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte analogPin; + +void stringCallback(char *myString) +{ + Firmata.sendString(myString); +} + + +void sysexCallback(byte command, byte argc, byte*argv) +{ + Firmata.sendSysex(command, argc, argv); +} + +void setup() +{ + Firmata.setFirmwareVersion(0, 1); + Firmata.attach(STRING_DATA, stringCallback); + Firmata.attach(START_SYSEX, sysexCallback); + Firmata.begin(57600); +} + +void loop() +{ + while(Firmata.available()) { + Firmata.processInput(); + } +} + + diff --git a/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino b/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino new file mode 100644 index 0000000..1da8963 --- /dev/null +++ b/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino @@ -0,0 +1,228 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* + Copyright (C) 2009 Jeff Hoefs. All rights reserved. + Copyright (C) 2009 Shigeru Kobayashi. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + */ + +#include <Wire.h> +#include <Firmata.h> + + +#define I2C_WRITE B00000000 +#define I2C_READ B00001000 +#define I2C_READ_CONTINUOUSLY B00010000 +#define I2C_STOP_READING B00011000 +#define I2C_READ_WRITE_MODE_MASK B00011000 + +#define MAX_QUERIES 8 + +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +unsigned int samplingInterval = 32; // default sampling interval is 33ms +unsigned int i2cReadDelayTime = 0; // default delay time between i2c read request and Wire.requestFrom() +unsigned int powerPinsEnabled = 0; // use as boolean to prevent enablePowerPins from being called more than once + +#define MINIMUM_SAMPLING_INTERVAL 10 + +#define REGISTER_NOT_SPECIFIED -1 + +struct i2c_device_info { + byte addr; + byte reg; + byte bytes; +}; + +i2c_device_info query[MAX_QUERIES]; + +byte i2cRxData[32]; +boolean readingContinuously = false; +byte queryIndex = 0; + +void readAndReportData(byte address, int theRegister, byte numBytes) +{ + if (theRegister != REGISTER_NOT_SPECIFIED) { + Wire.beginTransmission(address); + Wire.write((byte)theRegister); + Wire.endTransmission(); + delayMicroseconds(i2cReadDelayTime); // delay is necessary for some devices such as WiiNunchuck + } + else { + theRegister = 0; // fill the register with a dummy value + } + + Wire.requestFrom(address, numBytes); + + // check to be sure correct number of bytes were returned by slave + if(numBytes == Wire.available()) { + i2cRxData[0] = address; + i2cRxData[1] = theRegister; + for (int i = 0; i < numBytes; i++) { + i2cRxData[2 + i] = Wire.read(); + } + // send slave address, register and received bytes + Firmata.sendSysex(I2C_REPLY, numBytes + 2, i2cRxData); + } + else { + if(numBytes > Wire.available()) { + Firmata.sendString("I2C Read Error: Too many bytes received"); + } else { + Firmata.sendString("I2C Read Error: Too few bytes received"); + } + } + +} + +void sysexCallback(byte command, byte argc, byte *argv) +{ + byte mode; + byte slaveAddress; + byte slaveRegister; + byte data; + int delayTime; + + if (command == I2C_REQUEST) { + mode = argv[1] & I2C_READ_WRITE_MODE_MASK; + slaveAddress = argv[0]; + + switch(mode) { + case I2C_WRITE: + Wire.beginTransmission(slaveAddress); + for (byte i = 2; i < argc; i += 2) { + data = argv[i] + (argv[i + 1] << 7); + Wire.write(data); + } + Wire.endTransmission(); + delayMicroseconds(70); // TODO is this needed? + break; + case I2C_READ: + if (argc == 6) { + // a slave register is specified + slaveRegister = argv[2] + (argv[3] << 7); + data = argv[4] + (argv[5] << 7); // bytes to read + readAndReportData(slaveAddress, (int)slaveRegister, data); + } + else { + // a slave register is NOT specified + data = argv[2] + (argv[3] << 7); // bytes to read + readAndReportData(slaveAddress, (int)REGISTER_NOT_SPECIFIED, data); + } + break; + case I2C_READ_CONTINUOUSLY: + if ((queryIndex + 1) >= MAX_QUERIES) { + // too many queries, just ignore + Firmata.sendString("too many queries"); + break; + } + query[queryIndex].addr = slaveAddress; + query[queryIndex].reg = argv[2] + (argv[3] << 7); + query[queryIndex].bytes = argv[4] + (argv[5] << 7); + readingContinuously = true; + queryIndex++; + break; + case I2C_STOP_READING: + readingContinuously = false; + queryIndex = 0; + break; + default: + break; + } + } + else if (command == SAMPLING_INTERVAL) { + samplingInterval = argv[0] + (argv[1] << 7); + + if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) { + samplingInterval = MINIMUM_SAMPLING_INTERVAL; + } + + samplingInterval -= 1; + Firmata.sendString("sampling interval"); + } + + else if (command == I2C_CONFIG) { + delayTime = (argv[4] + (argv[5] << 7)); // MSB + delayTime = (delayTime << 8) + (argv[2] + (argv[3] << 7)); // add LSB + + if((argv[0] + (argv[1] << 7)) > 0) { + enablePowerPins(PORTC3, PORTC2); + } + + if(delayTime > 0) { + i2cReadDelayTime = delayTime; + } + + if(argc > 6) { + // If you extend I2C_Config, handle your data here + } + + } +} + +void systemResetCallback() +{ + readingContinuously = false; + queryIndex = 0; +} + +/* reference: BlinkM_funcs.h by Tod E. Kurt, ThingM, http://thingm.com/ */ +// Enables Pins A2 and A3 to be used as GND and Power +// so that I2C devices can be plugged directly +// into Arduino header (pins A2 - A5) +static void enablePowerPins(byte pwrpin, byte gndpin) +{ + if(powerPinsEnabled == 0) { + DDRC |= _BV(pwrpin) | _BV(gndpin); + PORTC &=~ _BV(gndpin); + PORTC |= _BV(pwrpin); + powerPinsEnabled = 1; + Firmata.sendString("Power pins enabled"); + delay(100); + } +} + +void setup() +{ + Firmata.setFirmwareVersion(2, 0); + + Firmata.attach(START_SYSEX, sysexCallback); + Firmata.attach(SYSTEM_RESET, systemResetCallback); + + for (int i = 0; i < TOTAL_PINS; ++i) { + pinMode(i, OUTPUT); + } + + Firmata.begin(57600); + Wire.begin(); +} + +void loop() +{ + while (Firmata.available()) { + Firmata.processInput(); + } + + currentMillis = millis(); + if (currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + + for (byte i = 0; i < queryIndex; i++) { + readAndReportData(query[i].addr, query[i].reg, query[i].bytes); + } + } +} diff --git a/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt b/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt new file mode 100644 index 0000000..77cec6d --- /dev/null +++ b/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt @@ -0,0 +1,458 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + diff --git a/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino b/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino new file mode 100644 index 0000000..d306c70 --- /dev/null +++ b/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino @@ -0,0 +1,239 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + */ + +/* + * This is an old version of StandardFirmata (v2.0). It is kept here because + * its the last version that works on an ATMEGA8 chip. Also, it can be used + * for host software that has not been updated to a newer version of the + * protocol. It also uses the old baud rate of 115200 rather than 57600. + */ + +#include <EEPROM.h> +#include <Firmata.h> + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting +int analogPin = 0; // counter for reading analog pins + +/* digital pins */ +byte reportPINs[TOTAL_PORTS]; // PIN == input port +byte previousPINs[TOTAL_PORTS]; // PIN == input port +byte pinStatus[TOTAL_PINS]; // store pin status, default OUTPUT +byte portStatus[TOTAL_PORTS]; + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis + + +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void outputPort(byte portNumber, byte portValue) +{ + portValue = portValue &~ portStatus[portNumber]; + if(previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + Firmata.sendDigitalPort(portNumber, portValue); + } +} + +/* ----------------------------------------------------------------------------- + * check all the active digital inputs for change of state, then add any events + * to the Serial output queue using Serial.print() */ +void checkDigitalInputs(void) +{ + byte i, tmp; + for(i=0; i < TOTAL_PORTS; i++) { + if(reportPINs[i]) { + switch(i) { + case 0: outputPort(0, PIND &~ B00000011); break; // ignore Rx/Tx 0/1 + case 1: outputPort(1, PINB); break; + case 2: outputPort(2, PINC); break; + } + } + } +} + +// ----------------------------------------------------------------------------- +/* sets the pin mode to the correct state and sets the relevant bits in the + * two bit-arrays that track Digital I/O and PWM status + */ +void setPinModeCallback(byte pin, int mode) { + byte port = 0; + byte offset = 0; + + if (pin < 8) { + port = 0; + offset = 0; + } else if (pin < 14) { + port = 1; + offset = 8; + } else if (pin < 22) { + port = 2; + offset = 14; + } + + if(pin > 1) { // ignore RxTx (pins 0 and 1) + pinStatus[pin] = mode; + switch(mode) { + case INPUT: + pinMode(pin, INPUT); + portStatus[port] = portStatus[port] &~ (1 << (pin - offset)); + break; + case OUTPUT: + digitalWrite(pin, LOW); // disable PWM + case PWM: + pinMode(pin, OUTPUT); + portStatus[port] = portStatus[port] | (1 << (pin - offset)); + break; + //case ANALOG: // TODO figure this out + default: + Firmata.sendString(""); + } + // TODO: save status to EEPROM here, if changed + } +} + +void analogWriteCallback(byte pin, int value) +{ + setPinModeCallback(pin,PWM); + analogWrite(pin, value); +} + +void digitalWriteCallback(byte port, int value) +{ + switch(port) { + case 0: // pins 2-7 (don't change Rx/Tx, pins 0 and 1) + // 0xFF03 == B1111111100000011 0x03 == B00000011 + PORTD = (value &~ 0xFF03) | (PORTD & 0x03); + break; + case 1: // pins 8-13 (14,15 are disabled for the crystal) + PORTB = (byte)value; + break; + case 2: // analog pins used as digital + PORTC = (byte)value; + break; + } +} + +// ----------------------------------------------------------------------------- +/* sets bits in a bit array (int) to toggle the reporting of the analogIns + */ +//void FirmataClass::setAnalogPinReporting(byte pin, byte state) { +//} +void reportAnalogCallback(byte pin, int value) +{ + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << pin); + } + else { // everything but 0 enables reporting of that pin + analogInputsToReport = analogInputsToReport | (1 << pin); + } + // TODO: save status to EEPROM here, if changed +} + +void reportDigitalCallback(byte port, int value) +{ + reportPINs[port] = (byte)value; + if(port == 2) // turn off analog reporting when used as digital + analogInputsToReport = 0; +} + +/*============================================================================== + * SETUP() + *============================================================================*/ +void setup() +{ + byte i; + + Firmata.setFirmwareVersion(2, 0); + + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + Firmata.attach(REPORT_DIGITAL, reportDigitalCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + + portStatus[0] = B00000011; // ignore Tx/RX pins + portStatus[1] = B11000000; // ignore 14/15 pins + portStatus[2] = B00000000; + +// for(i=0; i<TOTAL_PINS; ++i) { // TODO make this work with analogs + for(i=0; i<14; ++i) { + setPinModeCallback(i,OUTPUT); + } + // set all outputs to 0 to make sure internal pull-up resistors are off + PORTB = 0; // pins 8-15 + PORTC = 0; // analog port + PORTD = 0; // pins 0-7 + + // TODO rethink the init, perhaps it should report analog on default + for(i=0; i<TOTAL_PORTS; ++i) { + reportPINs[i] = false; + } + // TODO: load state from EEPROM here + + /* send digital inputs here, if enabled, to set the initial state on the + * host computer, since once in the loop(), this firmware will only send + * digital data on change. */ + if(reportPINs[0]) outputPort(0, PIND &~ B00000011); // ignore Rx/Tx 0/1 + if(reportPINs[1]) outputPort(1, PINB); + if(reportPINs[2]) outputPort(2, PINC); + + Firmata.begin(115200); +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ +/* DIGITALREAD - as fast as possible, check for changes and output them to the + * FTDI buffer using Serial.print() */ + checkDigitalInputs(); + currentMillis = millis(); + if(currentMillis - previousMillis > 20) { + previousMillis += 20; // run this every 20ms + /* SERIALREAD - Serial.read() uses a 128 byte circular buffer, so handle + * all serialReads at once, i.e. empty the buffer */ + while(Firmata.available()) + Firmata.processInput(); + /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over + * 60 bytes. use a timer to sending an event character every 4 ms to + * trigger the buffer to dump. */ + + /* ANALOGREAD - right after the event character, do all of the + * analogReads(). These only need to be done every 4ms. */ + for(analogPin=0;analogPin<TOTAL_ANALOG_PINS;analogPin++) { + if( analogInputsToReport & (1 << analogPin) ) { + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } + } +} diff --git a/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino b/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino new file mode 100644 index 0000000..cdcfff0 --- /dev/null +++ b/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino @@ -0,0 +1,53 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* This firmware supports as many servos as possible using the Servo library + * included in Arduino 0017 + * + * TODO add message to configure minPulse/maxPulse/degrees + * + * This example code is in the public domain. + */ + +#include <Servo.h> +#include <Firmata.h> + +Servo servos[MAX_SERVOS]; + +void analogWriteCallback(byte pin, int value) +{ + if (IS_PIN_SERVO(pin)) { + servos[PIN_TO_SERVO(pin)].write(value); + } +} + +void setup() +{ + byte pin; + + Firmata.setFirmwareVersion(0, 2); + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + + for (pin=0; pin < TOTAL_PINS; pin++) { + if (IS_PIN_SERVO(pin)) { + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin)); + } + } + + Firmata.begin(57600); +} + +void loop() +{ + while(Firmata.available()) + Firmata.processInput(); +} + diff --git a/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino b/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino new file mode 100644 index 0000000..44ea91e --- /dev/null +++ b/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino @@ -0,0 +1,46 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* Supports as many analog inputs and analog PWM outputs as possible. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte analogPin = 0; + +void analogWriteCallback(byte pin, int value) +{ + if (IS_PIN_PWM(pin)) { + pinMode(PIN_TO_DIGITAL(pin), OUTPUT); + analogWrite(PIN_TO_PWM(pin), value); + } +} + +void setup() +{ + Firmata.setFirmwareVersion(0, 1); + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.begin(57600); +} + +void loop() +{ + while(Firmata.available()) { + Firmata.processInput(); + } + // do one analogRead per loop, so if PC is sending a lot of + // analog write messages, we will only delay 1 analogRead + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + analogPin = analogPin + 1; + if (analogPin >= TOTAL_ANALOG_PINS) analogPin = 0; +} + diff --git a/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino b/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino new file mode 100644 index 0000000..a0d764f --- /dev/null +++ b/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino @@ -0,0 +1,72 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* Supports as many digital inputs and outputs as possible. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte previousPIN[TOTAL_PORTS]; // PIN means PORT for input +byte previousPORT[TOTAL_PORTS]; + +void outputPort(byte portNumber, byte portValue) +{ + // only send the data when it changes, otherwise you get too many messages! + if (previousPIN[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPIN[portNumber] = portValue; + } +} + +void setPinModeCallback(byte pin, int mode) { + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), mode); + } +} + +void digitalWriteCallback(byte port, int value) +{ + byte i; + byte currentPinValue, previousPinValue; + + if (port < TOTAL_PORTS && value != previousPORT[port]) { + for(i=0; i<8; i++) { + currentPinValue = (byte) value & (1 << i); + previousPinValue = previousPORT[port] & (1 << i); + if(currentPinValue != previousPinValue) { + digitalWrite(i + (port*8), currentPinValue); + } + } + previousPORT[port] = value; + } +} + +void setup() +{ + Firmata.setFirmwareVersion(0, 1); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + Firmata.begin(57600); +} + +void loop() +{ + byte i; + + for (i=0; i<TOTAL_PORTS; i++) { + outputPort(i, readPort(i, 0xff)); + } + + while(Firmata.available()) { + Firmata.processInput(); + } +} diff --git a/libraries/Firmata/examples/StandardFirmata/LICENSE.txt b/libraries/Firmata/examples/StandardFirmata/LICENSE.txt new file mode 100644 index 0000000..77cec6d --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata/LICENSE.txt @@ -0,0 +1,458 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + diff --git a/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino b/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino new file mode 100644 index 0000000..1a987ee --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino @@ -0,0 +1,636 @@ +/* + * Firmata is a generic protocol for communicating with microcontrollers + * from software on a host computer. It is intended to work with + * any host computer software package. + * + * To download a host software package, please clink on the following link + * to open the download page in your default browser. + * + * http://firmata.org/wiki/Download + */ + +/* + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + Copyright (C) 2010-2011 Paul Stoffregen. All rights reserved. + Copyright (C) 2009 Shigeru Kobayashi. All rights reserved. + Copyright (C) 2009-2011 Jeff Hoefs. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + + formatted using the GNU C formatting and indenting +*/ + +/* + * TODO: use Program Control to load stored profiles from EEPROM + */ + +#include <Servo.h> +#include <Wire.h> +#include <Firmata.h> + +// move the following defines to Firmata.h? +#define I2C_WRITE B00000000 +#define I2C_READ B00001000 +#define I2C_READ_CONTINUOUSLY B00010000 +#define I2C_STOP_READING B00011000 +#define I2C_READ_WRITE_MODE_MASK B00011000 +#define I2C_10BIT_ADDRESS_MODE_MASK B00100000 + +#define MAX_QUERIES 8 +#define MINIMUM_SAMPLING_INTERVAL 10 + +#define REGISTER_NOT_SPECIFIED -1 + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting + +/* digital input ports */ +byte reportPINs[TOTAL_PORTS]; // 1 = report this port, 0 = silence +byte previousPINs[TOTAL_PORTS]; // previous 8 bits sent + +/* pins configuration */ +byte pinConfig[TOTAL_PINS]; // configuration of every pin +byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else +int pinState[TOTAL_PINS]; // any value that has been written + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +int samplingInterval = 19; // how often to run the main loop (in ms) + +/* i2c data */ +struct i2c_device_info { + byte addr; + byte reg; + byte bytes; +}; + +/* for i2c read continuous more */ +i2c_device_info query[MAX_QUERIES]; + +byte i2cRxData[32]; +boolean isI2CEnabled = false; +signed char queryIndex = -1; +unsigned int i2cReadDelayTime = 0; // default delay time between i2c read request and Wire.requestFrom() + +Servo servos[MAX_SERVOS]; +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void readAndReportData(byte address, int theRegister, byte numBytes) { + // allow I2C requests that don't require a register read + // for example, some devices using an interrupt pin to signify new data available + // do not always require the register read so upon interrupt you call Wire.requestFrom() + if (theRegister != REGISTER_NOT_SPECIFIED) { + Wire.beginTransmission(address); + #if ARDUINO >= 100 + Wire.write((byte)theRegister); + #else + Wire.send((byte)theRegister); + #endif + Wire.endTransmission(); + delayMicroseconds(i2cReadDelayTime); // delay is necessary for some devices such as WiiNunchuck + } else { + theRegister = 0; // fill the register with a dummy value + } + + Wire.requestFrom(address, numBytes); // all bytes are returned in requestFrom + + // check to be sure correct number of bytes were returned by slave + if(numBytes == Wire.available()) { + i2cRxData[0] = address; + i2cRxData[1] = theRegister; + for (int i = 0; i < numBytes; i++) { + #if ARDUINO >= 100 + i2cRxData[2 + i] = Wire.read(); + #else + i2cRxData[2 + i] = Wire.receive(); + #endif + } + } + else { + if(numBytes > Wire.available()) { + Firmata.sendString("I2C Read Error: Too many bytes received"); + } else { + Firmata.sendString("I2C Read Error: Too few bytes received"); + } + } + + // send slave address, register and received bytes + Firmata.sendSysex(SYSEX_I2C_REPLY, numBytes + 2, i2cRxData); +} + +void outputPort(byte portNumber, byte portValue, byte forceSend) +{ + // pins not configured as INPUT are cleared to zeros + portValue = portValue & portConfigInputs[portNumber]; + // only send if the value is different than previously sent + if(forceSend || previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + } +} + +/* ----------------------------------------------------------------------------- + * check all the active digital inputs for change of state, then add any events + * to the Serial output queue using Serial.print() */ +void checkDigitalInputs(void) +{ + /* Using non-looping code allows constants to be given to readPort(). + * The compiler will apply substantial optimizations if the inputs + * to readPort() are compile-time constants. */ + if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false); + if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false); + if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false); + if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false); + if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false); + if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false); + if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false); + if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false); + if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false); + if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false); + if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false); + if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false); + if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false); + if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false); + if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false); + if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false); +} + +// ----------------------------------------------------------------------------- +/* sets the pin mode to the correct state and sets the relevant bits in the + * two bit-arrays that track Digital I/O and PWM status + */ +void setPinModeCallback(byte pin, int mode) +{ + if (pinConfig[pin] == I2C && isI2CEnabled && mode != I2C) { + // disable i2c so pins can be used for other functions + // the following if statements should reconfigure the pins properly + disableI2CPins(); + } + if (IS_PIN_SERVO(pin) && mode != SERVO && servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].detach(); + } + if (IS_PIN_ANALOG(pin)) { + reportAnalogCallback(PIN_TO_ANALOG(pin), mode == ANALOG ? 1 : 0); // turn on/off reporting + } + if (IS_PIN_DIGITAL(pin)) { + if (mode == INPUT) { + portConfigInputs[pin/8] |= (1 << (pin & 7)); + } else { + portConfigInputs[pin/8] &= ~(1 << (pin & 7)); + } + } + pinState[pin] = 0; + switch(mode) { + case ANALOG: + if (IS_PIN_ANALOG(pin)) { + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + } + pinConfig[pin] = ANALOG; + } + break; + case INPUT: + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + pinConfig[pin] = INPUT; + } + break; + case OUTPUT: + if (IS_PIN_DIGITAL(pin)) { + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable PWM + pinMode(PIN_TO_DIGITAL(pin), OUTPUT); + pinConfig[pin] = OUTPUT; + } + break; + case PWM: + if (IS_PIN_PWM(pin)) { + pinMode(PIN_TO_PWM(pin), OUTPUT); + analogWrite(PIN_TO_PWM(pin), 0); + pinConfig[pin] = PWM; + } + break; + case SERVO: + if (IS_PIN_SERVO(pin)) { + pinConfig[pin] = SERVO; + if (!servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin)); + } + } + break; + case I2C: + if (IS_PIN_I2C(pin)) { + // mark the pin as i2c + // the user must call I2C_CONFIG to enable I2C for a device + pinConfig[pin] = I2C; + } + break; + default: + Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM + } + // TODO: save status to EEPROM here, if changed +} + +void analogWriteCallback(byte pin, int value) +{ + if (pin < TOTAL_PINS) { + switch(pinConfig[pin]) { + case SERVO: + if (IS_PIN_SERVO(pin)) + servos[PIN_TO_SERVO(pin)].write(value); + pinState[pin] = value; + break; + case PWM: + if (IS_PIN_PWM(pin)) + analogWrite(PIN_TO_PWM(pin), value); + pinState[pin] = value; + break; + } + } +} + +void digitalWriteCallback(byte port, int value) +{ + byte pin, lastPin, mask=1, pinWriteMask=0; + + if (port < TOTAL_PORTS) { + // create a mask of the pins on this port that are writable. + lastPin = port*8+8; + if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS; + for (pin=port*8; pin < lastPin; pin++) { + // do not disturb non-digital pins (eg, Rx & Tx) + if (IS_PIN_DIGITAL(pin)) { + // only write to OUTPUT and INPUT (enables pullup) + // do not touch pins in PWM, ANALOG, SERVO or other modes + if (pinConfig[pin] == OUTPUT || pinConfig[pin] == INPUT) { + pinWriteMask |= mask; + pinState[pin] = ((byte)value & mask) ? 1 : 0; + } + } + mask = mask << 1; + } + writePort(port, (byte)value, pinWriteMask); + } +} + + +// ----------------------------------------------------------------------------- +/* sets bits in a bit array (int) to toggle the reporting of the analogIns + */ +//void FirmataClass::setAnalogPinReporting(byte pin, byte state) { +//} +void reportAnalogCallback(byte analogPin, int value) +{ + if (analogPin < TOTAL_ANALOG_PINS) { + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << analogPin); + } else { + analogInputsToReport = analogInputsToReport | (1 << analogPin); + } + } + // TODO: save status to EEPROM here, if changed +} + +void reportDigitalCallback(byte port, int value) +{ + if (port < TOTAL_PORTS) { + reportPINs[port] = (byte)value; + } + // do not disable analog reporting on these 8 pins, to allow some + // pins used for digital, others analog. Instead, allow both types + // of reporting to be enabled, but check if the pin is configured + // as analog when sampling the analog inputs. Likewise, while + // scanning digital pins, portConfigInputs will mask off values from any + // pins configured as analog +} + +/*============================================================================== + * SYSEX-BASED commands + *============================================================================*/ + +void sysexCallback(byte command, byte argc, byte *argv) +{ + byte mode; + byte slaveAddress; + byte slaveRegister; + byte data; + unsigned int delayTime; + + switch(command) { + case I2C_REQUEST: + mode = argv[1] & I2C_READ_WRITE_MODE_MASK; + if (argv[1] & I2C_10BIT_ADDRESS_MODE_MASK) { + Firmata.sendString("10-bit addressing mode is not yet supported"); + return; + } + else { + slaveAddress = argv[0]; + } + + switch(mode) { + case I2C_WRITE: + Wire.beginTransmission(slaveAddress); + for (byte i = 2; i < argc; i += 2) { + data = argv[i] + (argv[i + 1] << 7); + #if ARDUINO >= 100 + Wire.write(data); + #else + Wire.send(data); + #endif + } + Wire.endTransmission(); + delayMicroseconds(70); + break; + case I2C_READ: + if (argc == 6) { + // a slave register is specified + slaveRegister = argv[2] + (argv[3] << 7); + data = argv[4] + (argv[5] << 7); // bytes to read + readAndReportData(slaveAddress, (int)slaveRegister, data); + } + else { + // a slave register is NOT specified + data = argv[2] + (argv[3] << 7); // bytes to read + readAndReportData(slaveAddress, (int)REGISTER_NOT_SPECIFIED, data); + } + break; + case I2C_READ_CONTINUOUSLY: + if ((queryIndex + 1) >= MAX_QUERIES) { + // too many queries, just ignore + Firmata.sendString("too many queries"); + break; + } + queryIndex++; + query[queryIndex].addr = slaveAddress; + query[queryIndex].reg = argv[2] + (argv[3] << 7); + query[queryIndex].bytes = argv[4] + (argv[5] << 7); + break; + case I2C_STOP_READING: + byte queryIndexToSkip; + // if read continuous mode is enabled for only 1 i2c device, disable + // read continuous reporting for that device + if (queryIndex <= 0) { + queryIndex = -1; + } else { + // if read continuous mode is enabled for multiple devices, + // determine which device to stop reading and remove it's data from + // the array, shifiting other array data to fill the space + for (byte i = 0; i < queryIndex + 1; i++) { + if (query[i].addr = slaveAddress) { + queryIndexToSkip = i; + break; + } + } + + for (byte i = queryIndexToSkip; i<queryIndex + 1; i++) { + if (i < MAX_QUERIES) { + query[i].addr = query[i+1].addr; + query[i].reg = query[i+1].addr; + query[i].bytes = query[i+1].bytes; + } + } + queryIndex--; + } + break; + default: + break; + } + break; + case I2C_CONFIG: + delayTime = (argv[0] + (argv[1] << 7)); + + if(delayTime > 0) { + i2cReadDelayTime = delayTime; + } + + if (!isI2CEnabled) { + enableI2CPins(); + } + + break; + case SERVO_CONFIG: + if(argc > 4) { + // these vars are here for clarity, they'll optimized away by the compiler + byte pin = argv[0]; + int minPulse = argv[1] + (argv[2] << 7); + int maxPulse = argv[3] + (argv[4] << 7); + + if (IS_PIN_SERVO(pin)) { + if (servos[PIN_TO_SERVO(pin)].attached()) + servos[PIN_TO_SERVO(pin)].detach(); + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse); + setPinModeCallback(pin, SERVO); + } + } + break; + case SAMPLING_INTERVAL: + if (argc > 1) { + samplingInterval = argv[0] + (argv[1] << 7); + if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) { + samplingInterval = MINIMUM_SAMPLING_INTERVAL; + } + } else { + //Firmata.sendString("Not enough data"); + } + break; + case EXTENDED_ANALOG: + if (argc > 1) { + int val = argv[1]; + if (argc > 2) val |= (argv[2] << 7); + if (argc > 3) val |= (argv[3] << 14); + analogWriteCallback(argv[0], val); + } + break; + case CAPABILITY_QUERY: + Serial.write(START_SYSEX); + Serial.write(CAPABILITY_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + if (IS_PIN_DIGITAL(pin)) { + Serial.write((byte)INPUT); + Serial.write(1); + Serial.write((byte)OUTPUT); + Serial.write(1); + } + if (IS_PIN_ANALOG(pin)) { + Serial.write(ANALOG); + Serial.write(10); + } + if (IS_PIN_PWM(pin)) { + Serial.write(PWM); + Serial.write(8); + } + if (IS_PIN_SERVO(pin)) { + Serial.write(SERVO); + Serial.write(14); + } + if (IS_PIN_I2C(pin)) { + Serial.write(I2C); + Serial.write(1); // to do: determine appropriate value + } + Serial.write(127); + } + Serial.write(END_SYSEX); + break; + case PIN_STATE_QUERY: + if (argc > 0) { + byte pin=argv[0]; + Serial.write(START_SYSEX); + Serial.write(PIN_STATE_RESPONSE); + Serial.write(pin); + if (pin < TOTAL_PINS) { + Serial.write((byte)pinConfig[pin]); + Serial.write((byte)pinState[pin] & 0x7F); + if (pinState[pin] & 0xFF80) Serial.write((byte)(pinState[pin] >> 7) & 0x7F); + if (pinState[pin] & 0xC000) Serial.write((byte)(pinState[pin] >> 14) & 0x7F); + } + Serial.write(END_SYSEX); + } + break; + case ANALOG_MAPPING_QUERY: + Serial.write(START_SYSEX); + Serial.write(ANALOG_MAPPING_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + Serial.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127); + } + Serial.write(END_SYSEX); + break; + } +} + +void enableI2CPins() +{ + byte i; + // is there a faster way to do this? would probaby require importing + // Arduino.h to get SCL and SDA pins + for (i=0; i < TOTAL_PINS; i++) { + if(IS_PIN_I2C(i)) { + // mark pins as i2c so they are ignore in non i2c data requests + setPinModeCallback(i, I2C); + } + } + + isI2CEnabled = true; + + // is there enough time before the first I2C request to call this here? + Wire.begin(); +} + +/* disable the i2c pins so they can be used for other functions */ +void disableI2CPins() { + isI2CEnabled = false; + // disable read continuous mode for all devices + queryIndex = -1; + // uncomment the following if or when the end() method is added to Wire library + // Wire.end(); +} + +/*============================================================================== + * SETUP() + *============================================================================*/ + +void systemResetCallback() +{ + // initialize a defalt state + // TODO: option to load config from EEPROM instead of default + if (isI2CEnabled) { + disableI2CPins(); + } + for (byte i=0; i < TOTAL_PORTS; i++) { + reportPINs[i] = false; // by default, reporting off + portConfigInputs[i] = 0; // until activated + previousPINs[i] = 0; + } + // pins with analog capability default to analog input + // otherwise, pins default to digital output + for (byte i=0; i < TOTAL_PINS; i++) { + if (IS_PIN_ANALOG(i)) { + // turns off pullup, configures everything + setPinModeCallback(i, ANALOG); + } else { + // sets the output to 0, configures portConfigInputs + setPinModeCallback(i, OUTPUT); + } + } + // by default, do not report any analog inputs + analogInputsToReport = 0; + + /* send digital inputs to set the initial state on the host computer, + * since once in the loop(), this firmware will only send on change */ + /* + TODO: this can never execute, since no pins default to digital input + but it will be needed when/if we support EEPROM stored config + for (byte i=0; i < TOTAL_PORTS; i++) { + outputPort(i, readPort(i, portConfigInputs[i]), true); + } + */ +} + +void setup() +{ + Firmata.setFirmwareVersion(FIRMATA_MAJOR_VERSION, FIRMATA_MINOR_VERSION); + + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + Firmata.attach(REPORT_DIGITAL, reportDigitalCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + Firmata.attach(START_SYSEX, sysexCallback); + Firmata.attach(SYSTEM_RESET, systemResetCallback); + + Firmata.begin(57600); + systemResetCallback(); // reset to default config +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ + byte pin, analogPin; + + /* DIGITALREAD - as fast as possible, check for changes and output them to the + * FTDI buffer using Serial.print() */ + checkDigitalInputs(); + + /* SERIALREAD - processing incoming messagse as soon as possible, while still + * checking digital inputs. */ + while(Firmata.available()) + Firmata.processInput(); + + /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over + * 60 bytes. use a timer to sending an event character every 4 ms to + * trigger the buffer to dump. */ + + currentMillis = millis(); + if (currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + /* ANALOGREAD - do all analogReads() at the configured sampling interval */ + for(pin=0; pin<TOTAL_PINS; pin++) { + if (IS_PIN_ANALOG(pin) && pinConfig[pin] == ANALOG) { + analogPin = PIN_TO_ANALOG(pin); + if (analogInputsToReport & (1 << analogPin)) { + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } + } + // report i2c data for all device with read continuous mode enabled + if (queryIndex > -1) { + for (byte i = 0; i < queryIndex + 1; i++) { + readAndReportData(query[i].addr, query[i].reg, query[i].bytes); + } + } + } +} diff --git a/libraries/Firmata/keywords.txt b/libraries/Firmata/keywords.txt new file mode 100644 index 0000000..52e0a9c --- /dev/null +++ b/libraries/Firmata/keywords.txt @@ -0,0 +1,62 @@ +####################################### +# Syntax Coloring Map For Firmata +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +Firmata KEYWORD1 +callbackFunction KEYWORD1 +systemResetCallbackFunction KEYWORD1 +stringCallbackFunction KEYWORD1 +sysexCallbackFunction KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +begin KEYWORD2 +printVersion KEYWORD2 +blinkVersion KEYWORD2 +printFirmwareVersion KEYWORD2 +setFirmwareVersion KEYWORD2 +setFirmwareNameAndVersion KEYWORD2 +available KEYWORD2 +processInput KEYWORD2 +sendAnalog KEYWORD2 +sendDigital KEYWORD2 +sendDigitalPortPair KEYWORD2 +sendDigitalPort KEYWORD2 +sendString KEYWORD2 +sendString KEYWORD2 +sendSysex KEYWORD2 +attach KEYWORD2 +detach KEYWORD2 +flush KEYWORD2 + + +####################################### +# Constants (LITERAL1) +####################################### + +MAX_DATA_BYTES LITERAL1 + +DIGITAL_MESSAGE LITERAL1 +ANALOG_MESSAGE LITERAL1 +REPORT_ANALOG LITERAL1 +REPORT_DIGITAL LITERAL1 +REPORT_VERSION LITERAL1 +SET_PIN_MODE LITERAL1 +SYSTEM_RESET LITERAL1 + +START_SYSEX LITERAL1 +END_SYSEX LITERAL1 + +PWM LITERAL1 + +TOTAL_ANALOG_PINS LITERAL1 +TOTAL_DIGITAL_PINS LITERAL1 +TOTAL_PORTS LITERAL1 +ANALOG_PORT LITERAL1 diff --git a/libraries/GSM/GSM.h b/libraries/GSM/GSM.h new file mode 100644 index 0000000..ec2bf6a --- /dev/null +++ b/libraries/GSM/GSM.h @@ -0,0 +1,68 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3SIMPLIFIERFILE_ +#define _GSM3SIMPLIFIERFILE_ + +// This file simplifies the use of the GSM3 library +// First we include everything. + +#include <GSM3CircularBuffer.h> +#include <GSM3MobileCellManagement.h> +#include <GSM3MobileClientService.h> +#include <GSM3MobileNetworkRegistry.h> +#include <GSM3MobileServerService.h> +#include <GSM3ShieldV1AccessProvider.h> +#include <GSM3ShieldV1BandManagement.h> +#include <GSM3ShieldV1ClientProvider.h> +#include <GSM3ShieldV1DataNetworkProvider.h> +#include <GSM3ShieldV1ModemVerification.h> +#include <GSM3ShieldV1PinManagement.h> +#include <GSM3ShieldV1ScanNetworks.h> +#include <GSM3SMSService.h> +#include <GSM3VoiceCallService.h> + +#define GSM GSM3ShieldV1AccessProvider +#define GPRS GSM3ShieldV1DataNetworkProvider +#define GSMClient GSM3MobileClientService +#define GSMServer GSM3MobileServerService +#define GSMVoiceCall GSM3VoiceCallService +#define GSM_SMS GSM3SMSService + +#define GSMPIN GSM3ShieldV1PinManagement +#define GSMModem GSM3ShieldV1ModemVerification +#define GSMCell GSM3CellManagement +#define GSMBand GSM3ShieldV1BandManagement +#define GSMScanner GSM3ShieldV1ScanNetworks + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3CircularBuffer.cpp b/libraries/GSM/GSM3CircularBuffer.cpp new file mode 100644 index 0000000..e64c571 --- /dev/null +++ b/libraries/GSM/GSM3CircularBuffer.cpp @@ -0,0 +1,319 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include "GSM3CircularBuffer.h"
+#include <HardwareSerial.h>
+
+GSM3CircularBuffer::GSM3CircularBuffer(GSM3CircularBufferManager* mgr)
+{
+ head=0;
+ tail=0;
+ cbm=mgr;
+}
+
+int GSM3CircularBuffer::write(char c)
+{
+ byte aux=(tail+1)& __BUFFERMASK__;
+ if(aux!=head)
+ {
+ theBuffer[tail]=c;
+ // Lets put an extra zero at the end, so we can
+ // read chains as we like.
+ // This is not exactly perfect, we are always 1+ behind the head
+ theBuffer[aux]=0;
+ tail=aux;
+ return 1;
+ }
+ return 0;
+}
+
+char GSM3CircularBuffer::read()
+{
+ char res;
+ if(head!=tail)
+ {
+ res=theBuffer[head];
+ head=(head+1)& __BUFFERMASK__;
+ //if(cbm)
+ // cbm->spaceAvailable();
+ return res;
+ }
+ else
+ {
+ return 0;
+ }
+}
+
+char GSM3CircularBuffer::peek(int increment)
+{
+ char res;
+ byte num_aux;
+
+ if (tail>head) num_aux = tail-head;
+ else num_aux = 128 - head + tail;
+
+ if(increment < num_aux)
+ {
+ res=theBuffer[head];
+ return res;
+ }
+ else
+ {
+ return 0;
+ }
+}
+
+void GSM3CircularBufferManager::spaceAvailable(){return;};
+
+void GSM3CircularBuffer::flush()
+{
+ head=tail;
+}
+
+char* GSM3CircularBuffer::nextString()
+{
+ while(head!=tail)
+ {
+ head=(head+1) & __BUFFERMASK__;
+ if(theBuffer[head]==0)
+ {
+ head=(head+1) & __BUFFERMASK__;
+ return (char*)theBuffer+head;
+ }
+ }
+ return 0;
+}
+
+
+bool GSM3CircularBuffer::locate(const char* reference)
+{
+
+ return locate(reference, head, tail, 0, 0);
+}
+
+bool GSM3CircularBuffer::chopUntil(const char* reference, bool movetotheend, bool usehead)
+{
+ byte from, to;
+
+ if(locate(reference, head, tail, &from, &to))
+ {
+ if(usehead)
+ {
+ if(movetotheend)
+ head=(to+1) & __BUFFERMASK__;
+ else
+ head=from;
+ }
+ else
+ {
+ if(movetotheend)
+ tail=(to+1) & __BUFFERMASK__;
+ else
+ tail=from;
+ }
+ return true;
+ }
+ else
+ {
+ return false;
+ }
+}
+
+bool GSM3CircularBuffer::locate(const char* reference, byte thishead, byte thistail, byte* from, byte* to)
+{
+ int refcursor=0;
+ bool into=false;
+ byte b2, binit;
+ bool possible=1;
+
+ if(reference[0]==0)
+ return true;
+
+ for(byte b1=thishead; b1!=thistail;b1=(b1+1)& __BUFFERMASK__)
+ {
+ possible = 1;
+ b2 = b1;
+ while (possible&&(b2!=thistail))
+ {
+ if(theBuffer[b2]==reference[refcursor])
+ {
+ if(!into)
+ binit=b2;
+ into=true;
+ refcursor++;
+ if(reference[refcursor]==0)
+ {
+ if(from)
+ *from=binit;
+ if(to)
+ *to=b2;
+ return true;
+ }
+ }
+ else if (into==true)
+ {
+ possible = 0;
+ into=false;
+ refcursor=0;
+ }
+ b2=(b2+1)& __BUFFERMASK__;
+ }
+ }
+ return false;
+}
+
+bool GSM3CircularBuffer::extractSubstring(const char* from, const char* to, char* buffer, int bufsize)
+{
+ byte t1;
+ byte h2;
+ byte b;
+ int i;
+
+//DEBUG
+//Serial.println("Beginning extractSubstring");
+//Serial.print("head,tail=");Serial.print(int(head));Serial.print(",");Serial.println(int(tail));
+
+ if(!locate(from, head, tail, 0, &t1))
+ return false;
+
+//DEBUG
+//Serial.println("Located chain from.");
+
+ t1++; //To point the next.
+ if(!locate(to, t1, tail, &h2, 0))
+ return false;
+
+//DEBUG
+//Serial.println("Located chain to.");
+/*Serial.print("t1=");Serial.println(int(t1));
+Serial.print("h2=");Serial.println(int(h2));*/
+
+
+ for(i=0,b=t1;i<bufsize, b!=((h2) & __BUFFERMASK__); i++, b=(b+1)& __BUFFERMASK__)
+ buffer[i]=theBuffer[b];
+ buffer[i]=0;
+
+//DEBUG
+//Serial.println("");
+//Serial.println("Finishing extractSubstring");
+
+ return true;
+}
+
+int GSM3CircularBuffer::readInt()
+{
+ int res=0;
+ byte c;
+ bool anyfound=false;
+ bool negative=false;
+ for(byte b=head + 1; b!=tail; b=(b+1)& __BUFFERMASK__)
+ {
+ c=theBuffer[b];
+ if((c==' ' )&&(!anyfound))
+ {
+ } else if((c=='-' )&&(!anyfound))
+ {
+ negative=true;
+ anyfound=true; // Don't admit blanks after -
+ } else if((c>='0')&&(c<='9'))
+ {
+ anyfound=true;
+ res=(res*10)+(int)c-48;
+ }
+ else
+ {
+ if(negative)
+ res=(-1)*res;
+ return res;
+ }
+ }
+ if(negative)
+ res=(-1)*res;
+ return res;
+}
+
+void GSM3CircularBuffer::debugBuffer()
+{
+ byte h1=head;
+ byte t1=tail;
+ Serial.println();
+ Serial.print(h1);
+ Serial.print(" ");
+ Serial.print(t1);
+ Serial.print('>');
+ for(byte b=h1; b!=t1; b=(b+1)& __BUFFERMASK__)
+ printCharDebug(theBuffer[b]);
+ Serial.println();
+}
+
+void GSM3CircularBuffer::printCharDebug(uint8_t c)
+{
+ if((c>31)&&(c<127))
+ Serial.print((char)c);
+ else
+ {
+ Serial.print('%');
+ Serial.print(c);
+ Serial.print('%');
+ }
+}
+
+bool GSM3CircularBuffer::retrieveBuffer(char* buffer, int bufsize, int& SizeWritten)
+{
+ byte b;
+ int i;
+
+ /*for(i=0,b=head;i<bufsize, b!=tail; i++, b=(b+1)& __BUFFERMASK__)
+ {
+ buffer[i]=theBuffer[b];
+ }
+ buffer[i]=0;
+ SizeWritten = i;*/
+ b=head;
+ for(i=0;i<bufsize; i++)
+ {
+ if (b!=tail)
+ {
+ buffer[i]=theBuffer[b];
+ buffer[i+1]=0;
+ b=(b+1)& __BUFFERMASK__;
+ SizeWritten = i + 1;
+ }
+ }
+
+
+ return true;
+}
+
+
+
diff --git a/libraries/GSM/GSM3CircularBuffer.h b/libraries/GSM/GSM3CircularBuffer.h new file mode 100644 index 0000000..b160d09 --- /dev/null +++ b/libraries/GSM/GSM3CircularBuffer.h @@ -0,0 +1,205 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef __GSM3_CIRCULARBUFFER__
+#define __GSM3_CIRCULARBUFFER__
+
+
+#include <inttypes.h>
+#include <stddef.h>
+
+#ifndef byte
+#define byte uint8_t
+#endif
+
+// These values have to be interrelated
+// To-Do: may we have just one? (BUFFERMASK)
+#define __BUFFERSIZE__ 128
+#define __BUFFERMASK__ 0x7F
+
+class GSM3CircularBufferManager
+{
+ public:
+
+ /** If there is spaceAvailable in the buffer, lets send a XON
+ */
+ virtual void spaceAvailable();
+};
+
+class GSM3CircularBuffer
+{
+ private:
+ // Buffer pointers.
+ // head=tail means buffer empty
+ // tail=head-1 means buffer full
+ // tail=head+1 means just one char (pointed by head)
+ // REMEMBER. head can be moved only by the main program
+ // REMEMBER. tail can be moved only by the other thread (interrupts)
+ // REMEMBER. head and tail can move only FORWARD
+ volatile byte head; // First written one
+ volatile byte tail; // Last written one.
+
+ GSM3CircularBufferManager* cbm; // Circular buffer manager
+
+ // The buffer
+ volatile byte theBuffer[__BUFFERSIZE__];
+
+ /** Checks if a substring exists in the buffer
+ @param reference Substring
+ @param thishead Head
+ @param thistail Tail
+ @param from Initial byte position
+ @param to Final byte position
+ @return true if exists, in otherwise return false
+ */
+ bool locate(const char* reference, byte thishead, byte thistail, byte* from=0, byte* to=0);
+
+ public:
+
+ /** Constructor
+ @param mgr Circular buffer manager
+ */
+ GSM3CircularBuffer(GSM3CircularBufferManager* mgr=0);
+
+ // TO-DO.Check if this formule runs too at the buffer limit
+
+ /** Get available bytes in circular buffer
+ @return available bytes
+ */
+ inline byte availableBytes(){ return ((head-(tail+1))&__BUFFERMASK__);};
+
+ /** Stored bytes in circular buffer
+ @return stored bytes
+ */
+ inline byte storedBytes(){ return ((tail-head)&__BUFFERMASK__);};
+
+ /** Write a character in circular buffer
+ @param c Character
+ @return 1 if successful
+ */
+ int write(char c);
+
+ /** Returns a character and moves the pointer
+ @return character
+ */
+ char read();
+
+ /** Returns a character but does not move the pointer.
+ @param increment Increment
+ @return character
+ */
+ char peek(int increment);
+
+ /** Returns a pointer to the head of the buffer
+ @return buffer with pointer in head
+ */
+ inline char* firstString(){return (char*)theBuffer+head;};
+
+ /** Go forward one string
+ @return buffer with one string advance
+ */
+ char* nextString();
+
+ /** Flush circular buffer
+ */
+ void flush();
+
+ /** Get tail
+ @return tail
+ */
+ inline byte getTail(){return tail;};
+
+ /** Get head
+ @return head
+ */
+ inline byte getHead(){return head;};
+
+ // Only can be executed from the interrupt!
+ /** Delete circular buffer to the end
+ @param from Initial byte position
+ */
+ inline void deleteToTheEnd(byte from){tail=from;};
+
+ /** Checks if a substring exists in the buffer
+ move=0, dont move, =1,put head at the beginning of the string, =2, put head at the end
+ @param reference
+ @return true if exists, in otherwise return false
+ */
+ bool locate(const char* reference);
+
+ /** Locates reference. If found, moves head (or tail) to the beginning (or end)
+ @param reference
+ @param movetotheend
+ @param head
+ @return true if successful
+ */
+ bool chopUntil(const char* reference, bool movetotheend, bool head=true);
+
+ /** Reads an integer from the head. Stops with first non blank, non number character
+ @return integer from the head
+ */
+ int readInt();
+
+ // Caveat: copies the first bytes until buffer is full
+
+ /** Extract a substring from circular buffer
+ @param from Initial byte position
+ @param to Final byte position
+ @param buffer Buffer for copy substring
+ @param bufsize Buffer size
+ @return true if successful, false if substring does not exists
+ */
+ bool extractSubstring(const char* from, const char* to, char* buffer, int bufsize);
+
+ /** Retrieve all the contents of buffer from head to tail
+ @param buffer
+ @param bufsize
+ @param SizeWritten
+ @return true if successful
+ */
+ bool retrieveBuffer(char* buffer, int bufsize, int& SizeWritten);
+
+ /** Debug function to print the buffer after receiving data from the modem.
+ */
+ void debugBuffer();
+
+ /** Utility: dump character if printable, else, put in %x%
+ @param c Character
+ */
+ static void printCharDebug(uint8_t c);
+
+
+};
+
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileAccessProvider.cpp b/libraries/GSM/GSM3MobileAccessProvider.cpp new file mode 100644 index 0000000..02d1080 --- /dev/null +++ b/libraries/GSM/GSM3MobileAccessProvider.cpp @@ -0,0 +1,3 @@ +#include <GSM3MobileAccessProvider.h> + +GSM3MobileAccessProvider* theGSM3MobileAccessProvider;
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileAccessProvider.h b/libraries/GSM/GSM3MobileAccessProvider.h new file mode 100644 index 0000000..21ecd1b --- /dev/null +++ b/libraries/GSM/GSM3MobileAccessProvider.h @@ -0,0 +1,68 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3MOBILEACCESSPROVIDER_ +#define _GSM3MOBILEACCESSPROVIDER_ + +enum GSM3_NetworkStatus_t { ERROR, IDLE, CONNECTING, GSM_READY, GPRS_READY, TRANSPARENT_CONNECTED}; + +class GSM3MobileAccessProvider +{ + public: + // Access functions + //Configuration functions. + /** Establish GSM connection + @param pin PIN code + @param restart Determines if hardware restart + @param synchronous Determines sync mode + @return If synchronous, GSM3_NetworkStatus_t. If asynchronous, returns 0. + */ + virtual inline GSM3_NetworkStatus_t begin(char* pin=0,bool restart=true, bool synchronous=true)=0; + + /** Check network access status + @return 1 if Alive, 0 if down + */ + virtual inline int isAccessAlive()=0; + + /** Shutdown the modem (power off really) + @return true if successful + */ + virtual inline bool shutdown()=0; + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + virtual int ready()=0; +}; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileCellManagement.cpp b/libraries/GSM/GSM3MobileCellManagement.cpp new file mode 100644 index 0000000..1db20b9 --- /dev/null +++ b/libraries/GSM/GSM3MobileCellManagement.cpp @@ -0,0 +1 @@ +#include <GSM3MobileCellManagement.h>
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileCellManagement.h b/libraries/GSM/GSM3MobileCellManagement.h new file mode 100644 index 0000000..035dfee --- /dev/null +++ b/libraries/GSM/GSM3MobileCellManagement.h @@ -0,0 +1,53 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3MOBILECELLMANAGEMENT_ +#define _GSM3MOBILECELLMANAGEMENT_ + +#include <Arduino.h> + +class GSM3MobileCellManagement +{ + public: + + virtual inline int getLocation() {return 0;}; + + virtual inline int getICCID() {return 0;}; + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + virtual int ready()=0; +}; + +#endif diff --git a/libraries/GSM/GSM3MobileClientProvider.cpp b/libraries/GSM/GSM3MobileClientProvider.cpp new file mode 100644 index 0000000..3636a75 --- /dev/null +++ b/libraries/GSM/GSM3MobileClientProvider.cpp @@ -0,0 +1,3 @@ +#include <GSM3MobileClientProvider.h> + +GSM3MobileClientProvider* theGSM3MobileClientProvider;
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileClientProvider.h b/libraries/GSM/GSM3MobileClientProvider.h new file mode 100644 index 0000000..a771ff4 --- /dev/null +++ b/libraries/GSM/GSM3MobileClientProvider.h @@ -0,0 +1,156 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_MOBILECLIENTPROVIDER__ +#define __GSM3_MOBILECLIENTPROVIDER__ + +#include <Arduino.h> +#include <IPAddress.h> + +class GSM3MobileClientProvider +{ + protected: + + uint8_t sockets; + + public: + + /** Constructor */ + GSM3MobileClientProvider(){}; + + /** Minimum socket + @return socket + */ + virtual inline int minSocket()=0; + + /** Maximum socket + @return socket + */ + virtual inline int maxSocket()=0; + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + virtual int ready()=0; + + /** Get status socket client + @param socket Socket + @return 1 if connected + */ + virtual bool getStatusSocketClient(uint8_t socket)=0; + + // Socket management + + /** Get socket + @param socket Socket + @return socket + */ + virtual int getSocket(int socket=-1)=0; + + /** Release socket + @param socket Socket + */ + virtual void releaseSocket(int socket)=0; + + // Client socket functions + + /** Connect to a server via TCP connection + @param server Server name or IP address in a String + @param port Port + @param id_socket Socket + @return 0 if command running, 1 if success, otherwise error + */ + virtual int connectTCPClient(const char* server, int port, int id_socket)=0; + + /** Connect to a server (by IP address) via TCP connection + @param add IP address in IPAddress format + @param port Port + @param id_socket Socket + @return 0 if command running, 1 if success, otherwise error + */ + virtual int connectTCPClient(IPAddress add, int port, int id_socket)=0; + + /** Begin writing through a socket + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + virtual void beginWriteSocket(bool client1Server0, int id_socket)=0; + + /** Write through a socket. MUST go after beginWriteSocket() + @param c character to be written + */ + virtual void writeSocket(uint8_t c)=0; + + /** Write through a socket. MUST go after beginWriteSocket() + @param buf characters to be written (final 0 will not be written) + */ + virtual void writeSocket(const char* buf)=0; + + /** Finish current writing + */ + virtual void endWriteSocket()=0; + + /** Check if there are data to be read in socket. + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Local socket number + @return 0 if command running, 1 if there are data available, 4 if no data, otherwise error + */ + virtual int availableSocket(bool client, int id_socket)=0; + + /** Read data (get a character) available in socket + @return character + */ + virtual int readSocket()=0; + + /** Flush socket + */ + virtual void flushSocket()=0; + + /** Get a character but will not advance the buffer head + @return character + */ + virtual int peekSocket()=0; + + /** Close a socket + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Socket + @return 0 if command running, 1 if success, otherwise error + */ + virtual int disconnectTCP(bool client1Server0, int idsocket)=0; + +}; + +extern GSM3MobileClientProvider* theGSM3MobileClientProvider; + +#endif diff --git a/libraries/GSM/GSM3MobileClientService.cpp b/libraries/GSM/GSM3MobileClientService.cpp new file mode 100644 index 0000000..a913f54 --- /dev/null +++ b/libraries/GSM/GSM3MobileClientService.cpp @@ -0,0 +1,260 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3MobileClientService.h>
+#include <GSM3MobileClientProvider.h>
+#include <Arduino.h>
+
+// While there is only a shield (ShieldV1) we will include it by default
+#include <GSM3ShieldV1ClientProvider.h>
+GSM3ShieldV1ClientProvider theShieldV1ClientProvider;
+
+
+#define GSM3MOBILECLIENTSERVICE_CLIENT 0x01 // 1: This side is Client. 0: This side is Server
+#define GSM3MOBILECLIENTSERVICE_WRITING 0x02 // 1: TRUE 0: FALSE
+#define GSM3MOBILECLIENTSERVICE_SYNCH 0x04 // 1: TRUE, compatible with other clients 0: FALSE
+
+#define __TOUTBEGINWRITE__ 10000
+
+
+GSM3MobileClientService::GSM3MobileClientService(bool synch)
+{
+ flags = GSM3MOBILECLIENTSERVICE_CLIENT;
+ if(synch)
+ flags |= GSM3MOBILECLIENTSERVICE_SYNCH;
+ mySocket=255;
+}
+
+GSM3MobileClientService::GSM3MobileClientService(int socket, bool synch)
+{
+ // We are creating a socket on an existing, occupied one.
+ flags=0;
+ if(synch)
+ flags |= GSM3MOBILECLIENTSERVICE_SYNCH;
+ mySocket=socket;
+ theGSM3MobileClientProvider->getSocket(socket);
+
+}
+
+// Returns 0 if last command is still executing
+// 1 if success
+// >1 if error
+int GSM3MobileClientService::ready()
+{
+ return theGSM3MobileClientProvider->ready();
+}
+
+int GSM3MobileClientService::connect(IPAddress add, uint16_t port)
+{
+ if(theGSM3MobileClientProvider==0)
+ return 2;
+
+ // TODO: ask for the socket id
+ mySocket=theGSM3MobileClientProvider->getSocket();
+
+ if(mySocket<0)
+ return 2;
+
+ int res=theGSM3MobileClientProvider->connectTCPClient(add, port, mySocket);
+ if(flags & GSM3MOBILECLIENTSERVICE_SYNCH)
+ res=waitForAnswer();
+
+ return res;
+};
+
+int GSM3MobileClientService::connect(const char *host, uint16_t port)
+{
+
+ if(theGSM3MobileClientProvider==0)
+ return 2;
+ // TODO: ask for the socket id
+ mySocket=theGSM3MobileClientProvider->getSocket();
+
+ if(mySocket<0)
+ return 2;
+
+ int res=theGSM3MobileClientProvider->connectTCPClient(host, port, mySocket);
+ if(flags & GSM3MOBILECLIENTSERVICE_SYNCH)
+ res=waitForAnswer();
+
+ return res;
+}
+
+int GSM3MobileClientService::waitForAnswer()
+{
+ unsigned long m;
+ m=millis();
+ int res;
+
+ while(((millis()-m)< __TOUTBEGINWRITE__ )&&(ready()==0))
+ delay(100);
+
+ res=ready();
+
+ // If we get something different from a 1, we are having a problem
+ if(res!=1)
+ res=0;
+
+ return res;
+}
+
+void GSM3MobileClientService::beginWrite(bool sync)
+{
+ flags |= GSM3MOBILECLIENTSERVICE_WRITING;
+ theGSM3MobileClientProvider->beginWriteSocket(flags & GSM3MOBILECLIENTSERVICE_CLIENT, mySocket);
+ if(sync)
+ waitForAnswer();
+}
+
+size_t GSM3MobileClientService::write(uint8_t c)
+{
+ if(!(flags & GSM3MOBILECLIENTSERVICE_WRITING))
+ beginWrite(true);
+ theGSM3MobileClientProvider->writeSocket(c);
+ return 1;
+}
+
+size_t GSM3MobileClientService::write(const uint8_t* buf)
+{
+ if(!(flags & GSM3MOBILECLIENTSERVICE_WRITING))
+ beginWrite(true);
+ theGSM3MobileClientProvider->writeSocket((const char*)(buf));
+ return strlen((const char*)buf);
+}
+
+size_t GSM3MobileClientService::write(const uint8_t* buf, size_t sz)
+{
+ if(!(flags & GSM3MOBILECLIENTSERVICE_WRITING))
+ beginWrite(true);
+ for(int i=0;i<sz;i++)
+ theGSM3MobileClientProvider->writeSocket(buf[i]);
+ return sz;
+}
+
+void GSM3MobileClientService::endWrite(bool sync)
+{
+ flags ^= GSM3MOBILECLIENTSERVICE_WRITING;
+ theGSM3MobileClientProvider->endWriteSocket();
+ if(sync)
+ waitForAnswer();
+}
+
+uint8_t GSM3MobileClientService::connected()
+{
+ if(mySocket==255)
+ return 0;
+ return theGSM3MobileClientProvider->getStatusSocketClient(mySocket);
+}
+
+GSM3MobileClientService::operator bool()
+{
+ return connected()==1;
+};
+
+int GSM3MobileClientService::available()
+{
+ int res;
+
+ // Even if not connected, we are looking for available data
+
+ if(flags & GSM3MOBILECLIENTSERVICE_WRITING)
+ endWrite(true);
+
+ res=theGSM3MobileClientProvider->availableSocket(flags & GSM3MOBILECLIENTSERVICE_CLIENT,mySocket);
+ if(flags & GSM3MOBILECLIENTSERVICE_SYNCH)
+ res=waitForAnswer();
+
+ return res;
+}
+
+int GSM3MobileClientService::read(uint8_t *buf, size_t size)
+{
+ int i;
+ uint8_t c;
+
+ for(i=0;i<size;i++)
+ {
+ c=read();
+ if(c==0)
+ break;
+ buf[i]=c;
+ }
+
+ return i;
+/* This is the old implementation, testing a simpler one
+ int res;
+ // If we were writing, just stop doing it.
+ if(flags & GSM3MOBILECLIENTSERVICE_WRITING)
+ endWrite(true);
+ res=theGSM3MobileClientProvider->readSocket(flags & GSM3MOBILECLIENTSERVICE_CLIENT, (char *)(buf), size, mySocket);
+
+ return res;
+*/
+}
+
+int GSM3MobileClientService::read()
+{
+ if(flags & GSM3MOBILECLIENTSERVICE_WRITING)
+ endWrite(true);
+ int c=theGSM3MobileClientProvider->readSocket();
+ return c;
+}
+
+int GSM3MobileClientService::peek()
+{
+ if(flags & GSM3MOBILECLIENTSERVICE_WRITING)
+ endWrite(true);
+ return theGSM3MobileClientProvider->peekSocket(/*mySocket, false*/);
+}
+
+void GSM3MobileClientService::flush()
+{
+ if(flags & GSM3MOBILECLIENTSERVICE_WRITING)
+ endWrite(true);
+ theGSM3MobileClientProvider->flushSocket(/*mySocket*/);
+ if(flags & GSM3MOBILECLIENTSERVICE_SYNCH)
+ waitForAnswer();
+
+}
+
+void GSM3MobileClientService::stop()
+{
+ if(flags & GSM3MOBILECLIENTSERVICE_WRITING)
+ endWrite(true);
+ theGSM3MobileClientProvider->disconnectTCP(flags & GSM3MOBILECLIENTSERVICE_CLIENT, mySocket);
+ theGSM3MobileClientProvider->releaseSocket(mySocket);
+ mySocket = 0;
+ if(flags & GSM3MOBILECLIENTSERVICE_SYNCH)
+ waitForAnswer();
+}
+
diff --git a/libraries/GSM/GSM3MobileClientService.h b/libraries/GSM/GSM3MobileClientService.h new file mode 100644 index 0000000..5a36a97 --- /dev/null +++ b/libraries/GSM/GSM3MobileClientService.h @@ -0,0 +1,162 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef _GSM3MOBILECLIENTSERVICE_
+#define _GSM3MOBILECLIENTSERVICE_
+
+#include <GSM3MobileNetworkProvider.h>
+#include <Client.h>
+
+
+class GSM3MobileClientService : public Client
+{
+ private:
+
+ uint8_t mySocket;
+ uint8_t flags;
+
+ /** Blocks waiting for an answer
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int waitForAnswer();
+
+ public:
+
+ /** Constructor
+ @param synch Sync mode
+ */
+ GSM3MobileClientService(bool synch=true);
+
+ /** Constructor
+ @param socket Socket
+ @param synch Sync mode
+ */
+ GSM3MobileClientService(int socket, bool synch);
+
+ /** Get last command status
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int ready();
+
+ // we take this function out as IPAddress is complex to bring to
+ // version 1.
+ /** Connect to server by IP address
+ @param (IPAddress)
+ @param (uint16_t)
+ @return returns 0 if last command is still executing, 1 success, 2 if there are no resources
+ */
+ inline int connect(IPAddress, uint16_t);
+
+ /** Connect to server by hostname
+ @param host Hostname
+ @param port Port
+ @return returns 0 if last command is still executing, 1 success, 2 if there are no resources
+ */
+ int connect(const char *host, uint16_t port);
+
+ /** Initialize write in request
+ @param sync Sync mode
+ */
+ void beginWrite(bool sync=false);
+
+ /** Write a character in request
+ @param c Character
+ @return size
+ */
+ size_t write(uint8_t c);
+
+ /** Write a characters buffer in request
+ @param buf Buffer
+ @return buffer size
+ */
+ size_t write(const uint8_t *buf);
+
+ /** Write a characters buffer with size in request
+ @param (uint8_t*) Buffer
+ @param (size_t) Buffer size
+ @return buffer size
+ */
+ size_t write(const uint8_t*, size_t);
+
+ /** Finish write request
+ @param sync Sync mode
+ */
+ void endWrite(bool sync=false);
+
+ /** Check if connected to server
+ @return 1 if connected
+ */
+ uint8_t connected();
+
+ operator bool();
+
+ /** Read from response buffer and copy size specified to buffer
+ @param buf Buffer
+ @param size Buffer size
+ @return bytes read
+ */
+ int read(uint8_t *buf, size_t size);
+
+ /** Read a character from response buffer
+ @return character
+ */
+ int read();
+
+ /** Check if exists a response available
+ @return 1 if exists, 0 if not exists
+ */
+ int available();
+
+ /** Read a character from response buffer but does not move the pointer.
+ @return character
+ */
+ int peek();
+
+ /** Flush response buffer
+ */
+ void flush();
+
+ /** Stop client
+ */
+ void stop();
+
+ /** Get socket
+ @return socket
+ */
+ inline int getSocket(){return (int)mySocket;};
+
+
+};
+
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileDataNetworkProvider.cpp b/libraries/GSM/GSM3MobileDataNetworkProvider.cpp new file mode 100644 index 0000000..538f6d4 --- /dev/null +++ b/libraries/GSM/GSM3MobileDataNetworkProvider.cpp @@ -0,0 +1,3 @@ +#include <GSM3MobileDataNetworkProvider.h> + +// GSM3MobileDataNetworkProvider* theGSM3MobileDataNetworkProvider;
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileDataNetworkProvider.h b/libraries/GSM/GSM3MobileDataNetworkProvider.h new file mode 100644 index 0000000..bffd381 --- /dev/null +++ b/libraries/GSM/GSM3MobileDataNetworkProvider.h @@ -0,0 +1,62 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3MOBILEDATANETWORKPROVIDER_ +#define _GSM3MOBILEDATANETWORKPROVIDER_ + +#include <GSM3MobileAccessProvider.h> + +// This class is not really useful, but serves as a guideline for programmers +// We keep it but it should never be linked +class GSM3MobileDataNetworkProvider +{ + public: + + /** Attach to GPRS/GSM network + @param networkId APN GPRS + @param user Username + @param pass Password + @return connection status + */ + virtual GSM3_NetworkStatus_t networkAttach(char* networId, char* user, char* pass)=0; + + /** Detach GPRS/GSM network + @return connection status + */ + virtual GSM3_NetworkStatus_t networkDetach()=0; + +}; + +extern GSM3MobileDataNetworkProvider* theGSM3MobileDataNetworkProvider; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileMockupProvider.cpp b/libraries/GSM/GSM3MobileMockupProvider.cpp new file mode 100644 index 0000000..b39ee26 --- /dev/null +++ b/libraries/GSM/GSM3MobileMockupProvider.cpp @@ -0,0 +1,191 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3MobileNetworkProvider.h>
+#include <GSM3MobileMockupProvider.h>
+#include <inttypes.h>
+#include <HardwareSerial.h>
+
+
+GSM3MobileMockupProvider::GSM3MobileMockupProvider()
+{
+ lineStatus=IDLE;
+ msgExample="Hello#World";
+ msgIndex=0;
+};
+
+int GSM3MobileMockupProvider::begin(char* pin)
+{
+ Serial.println("GSM3MobileMockupProvider::begin()");
+ return 0;
+};
+
+int GSM3MobileMockupProvider::ready()
+{
+ Serial.println("GSM3MobileMockupProvider::ready()");
+ return 1;
+};
+
+int GSM3MobileMockupProvider::beginSMS(const char* number)
+{
+ Serial.println("SM3MobileMockupProvider::beginSMS()");
+ return 0;
+};
+
+void GSM3MobileMockupProvider::writeSMS(char c)
+{
+ Serial.print(c);
+};
+
+int GSM3MobileMockupProvider::endSMS()
+{
+ Serial.println("GSM3MobileMockupProvider::endSMS()");
+};
+
+int GSM3MobileMockupProvider::availableSMS()
+{
+ Serial.println("GSM3MobileMockupProvider::availableSMS()");
+ return 120;
+};
+
+int GSM3MobileMockupProvider::peek()
+{
+ return (int)'H';
+};
+
+int GSM3MobileMockupProvider::remoteSMSNumber(char* number, int nlength)
+{
+ if(nlength>=13)
+ strcpy(number, "+34630538546");
+ return 12;
+};
+
+
+void GSM3MobileMockupProvider::flushSMS()
+{
+ Serial.println("GSM3MobileMockupProvider::flushSMS()");
+};
+
+int GSM3MobileMockupProvider::readSMS()
+{
+ if(msgExample[msgIndex]==0)
+ {
+ msgIndex=0;
+ return 0;
+ }
+ else
+ {
+ msgIndex++;
+ return msgExample[msgIndex-1];
+ };
+};
+
+int GSM3MobileMockupProvider::connectTCPClient(const char* server, int port, int id_socket)
+{
+ Serial.println("GSM3MobileMockupProvider::connectTCPClient()");
+ Serial.print(server);Serial.print(":");Serial.print(port);Serial.print("-");Serial.println(id_socket);
+}
+
+void GSM3MobileMockupProvider::writeSocket(const uint8_t *buf, size_t size, int id_socket)
+{
+ int i;
+ for(i=0;i<size;i++)
+ Serial.print(buf[i]);
+}
+/* I'm taking this off. We'll reply from the NetworkProvider
+uint8_t GSM3MobileMockupProvider::getStatus(uint8_t socket)
+{
+ if((socket>=minSocket())&&(socket<=maxSocket()))
+ return 1;
+ else
+ return 0;
+};
+*/
+
+int GSM3MobileMockupProvider::readSocket(uint8_t *buf, size_t size, int idsocket)
+{
+ int i;
+ int l=strlen(msgExample);
+ for(i=0;(i<size)&&(i<l);i++)
+ buf[i]=msgExample[i];
+ buf[i]=0;
+ return i;
+}
+
+int GSM3MobileMockupProvider::availableSocket(int idsocket)
+{
+ return 1;
+};
+
+int GSM3MobileMockupProvider::readSocket(int idsocket, bool advance)
+{
+ char c;
+ if(msgExample[msgIndex]==0)
+ {
+ msgIndex=0;
+ return 0;
+ }
+ else
+ {
+ c=msgExample[msgIndex];
+ if(advance)
+ msgIndex++;
+ };
+ return c;
+};
+
+void GSM3MobileMockupProvider::flushSocket(int idsocket)
+{
+ while(readSocket(idsocket));
+};
+
+int GSM3MobileMockupProvider::disconnectTCP(int idsocket)
+{
+ Serial.println("GSM3MobileMockupProvider::disconnectTCP()");
+ return 1;
+};
+
+int GSM3MobileMockupProvider::connectTCPServer(int port, char* localIP, int* localIPlength)
+{
+ Serial.println("GSM3MobileMockupProvider::connectTCPServer()");
+ if((localIP!=0)&&(*localIPlength>12))
+ strcpy("192.168.1.1", localIP);
+ return 1;
+};
+
+bool GSM3MobileMockupProvider::getSocketModemStatus(uint8_t s)
+{
+ // Feeling lazy
+ return true;
+}
+
diff --git a/libraries/GSM/GSM3MobileMockupProvider.h b/libraries/GSM/GSM3MobileMockupProvider.h new file mode 100644 index 0000000..59eee41 --- /dev/null +++ b/libraries/GSM/GSM3MobileMockupProvider.h @@ -0,0 +1,255 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef _GSM3MOBILEMOCKUPPROVIDER_
+#define _GSM3MOBILEMOCKUPPROVIDER_
+
+#include <GSM3MobileNetworkProvider.h>
+#include <GSM3MobileVoiceProvider.h>
+
+class GSM3MobileMockupProvider: public GSM3MobileNetworkProvider
+{
+ private:
+ // Introducing this status is quite "heavy". But something like this should
+ // be added to ShieldV1. Or not.
+ // Note, in ShieldV1 there is no "RECEIVINGSMS" status.
+ enum GSM3_modemlinest_e { IDLE, WAITINGANSWER, SENDINGSMS};
+ GSM3_modemlinest_e lineStatus;
+ char* msgExample;
+ int msgIndex;
+
+ public:
+
+ /** Minimum socket
+ @return 1
+ */
+ inline int minSocket(){return 1;};
+
+ /** Maximum socket
+ @return 8
+ */
+ inline int maxSocket(){return 8;};
+
+ /** Constructor */
+ GSM3MobileMockupProvider();
+
+ /** Get network status
+ @return network status
+ */
+ inline GSM3_NetworkStatus_t getStatus(){return ERROR;};
+
+ /** Get voice call status
+ @return call status
+ */
+ inline GSM3_voiceCall_st getvoiceCallStatus(){return IDLE_CALL;};
+
+ /** Get last command status
+ @return Returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int ready();
+ inline void closeCommand(int code){};
+
+ //Configuration functions.
+
+ /** Begin connection
+ @param pin PIN code
+ @return
+ */
+ int begin(char* pin=0);
+
+ /** Check if is modem alive
+ @return 0
+ */
+ inline int isModemAlive(){return 0;};
+
+ /** Shutdown the modem (power off really)
+ @return true if successful
+ */
+ inline bool shutdown(){return false;};
+
+ //Call functions
+
+ /** Launch a voice call
+ @param number Phone number to be called
+ @return If asynchronous, returns 0. If synchronous, 1 if success, other if error
+ */
+ inline int voiceCall(const char* number){return 0;};
+
+ /** Answer a voice call
+ @return If asynchronous, returns 0. If synchronous, 1 if success, other if error
+ */
+ inline int answerCall(){return 0;};
+
+ /** Hang a voice call
+ @return If asynchronous, returns 0. If synchronous, 1 if success, other if error
+ */
+ inline int hangCall(){return 0;};
+
+ /** Retrieve phone number of caller
+ @param buffer Buffer for copy phone number
+ @param bufsize Buffer size
+ @return If asynchronous, returns 0. If synchronous, 1 if success, other if error
+ */
+ inline int retrieveCallingNumber(char* buffer, int*& bufsize){return 0;};
+
+ // SMS functions
+
+ /** Begin a SMS to send it
+ @param number Destination
+ @return error command if it exists
+ */
+ int beginSMS(const char* number);
+
+ /** End SMS
+ @return error command if it exists
+ */
+ int endSMS();
+
+ /** Check if SMS available and prepare it to be read
+ @return error command if it exists
+ */
+ int availableSMS();
+
+ /** Read a byte but do not advance the buffer header (circular buffer)
+ @return character
+ */
+ int peek();
+
+ /** Delete the SMS from Modem memory and proccess answer
+ */
+ void flushSMS();
+
+ /** Read sender number phone
+ @param number Buffer for save number phone
+ @param nlength Buffer length
+ @return 1 success, >1 error
+ */
+ int remoteSMSNumber(char* number, int nlength);
+
+ /** Read one char for SMS buffer (advance circular buffer)
+ @return character
+ */
+ int readSMS();
+
+ /** Write a SMS character by character
+ @param c Character
+ */
+ void writeSMS(char c);
+
+ // Socket functions
+
+ /** Connect to a remote TCP server
+ @param server String with IP or server name
+ @param port Remote port number
+ @param id_socket Local socket number
+ @return 0 if command running, 1 if success, otherwise error
+ */
+ int connectTCPClient(const char* server, int port, int id_socket);
+
+ // Attention to parameter rewriting in ShieldV1
+ /** Write buffer information into a socket
+ @param buf Buffer
+ @param size Buffer size
+ @param idsocket Socket
+ */
+ void writeSocket(const uint8_t *buf, size_t size, int idsocket);
+
+ // ShieldV1 will have two reading mechanisms:
+ // Mechanism 1: Call AT+QIRD for size bytes. Put them in the circular buffer,
+ // fill buf. Take care to xon/xoff effect, as we may copy just a part of the
+ // incoming bytes.
+ /** Read socket and put information in a buffer
+ @param buf Buffer
+ @param size Buffer size
+ @param idsocket Socket
+ @return
+ */
+ int readSocket(uint8_t *buf, size_t size, int idsocket);
+
+ // Mechanism 2 in ShieldV1:
+ // When called "available()" or "read()" reuse readSocket code to execute
+ // QIRD SYNCHRONOUSLY. Ask the modem for 1500 bytes but do not copy them anywhere,
+ // leave data in the circular buffer. Put buffer head at the start of received data.
+ // Peek() will get a character but will not advance the buffer head.
+ // Read() will get one character. XON/XOFF will take care of buffer filling
+ // If Read() gets to the end of the QIRD response, execute again QIRD SYNCHRONOUSLY
+ // If the user executes flush(), execute read() until there is nothing more to read()
+ // (the modem gives no way to empty the socket of incoming data)
+
+ /** Check if there are data to be read in socket.
+ @param idsocket Local socket number
+ @return 0 if command running, 1 if there are data available, 4 if no data, otherwise error
+ */
+ int availableSocket(int idsocket);
+
+ /** Read data (get a character) available in socket
+ @param idsocket Socket
+ @param advance Determines if advance the buffer head
+ @return character
+ */
+ int readSocket(int idsocket, bool advance=true);
+
+ /** Flush socket
+ @param idsocket Socket
+ */
+ void flushSocket(int idsocket);
+
+ // This is the same in ShieldV1
+ /** Close a socket
+ @param idsocket Socket
+ @return 0 if command running, 1 if success, otherwise error
+ */
+ int disconnectTCP(int idsocket);
+
+ // TCP Server. Attention. Changing the int*&. We'll receive a buffer for the IP
+ // If the pointer ins NULL just forget it
+ // I think that opening a server does not occupy a socket. Is that true?
+ /** Establish a TCP connection
+ @param port Port
+ @param localIP IP address
+ @param localIPlength IP address size in characters
+ @return command error if exists
+ */
+ int connectTCPServer(int port, char* localIP, int* localIPlength);
+
+ // Modem sockets status. Return TRUE if the modem thinks the socket is occupied.
+ // This should be detected through an unrequisited response
+ /** Get modem status
+ @param s Socket
+ @return modem status (true if connected)
+ */
+ bool getSocketModemStatus(uint8_t s);
+
+
+};
+#endif
diff --git a/libraries/GSM/GSM3MobileNetworkProvider.cpp b/libraries/GSM/GSM3MobileNetworkProvider.cpp new file mode 100644 index 0000000..a8a91c2 --- /dev/null +++ b/libraries/GSM/GSM3MobileNetworkProvider.cpp @@ -0,0 +1,72 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3MobileNetworkProvider.h>
+#include <HardwareSerial.h>
+
+GSM3MobileNetworkProvider* theProvider;
+
+GSM3MobileNetworkProvider::GSM3MobileNetworkProvider()
+{
+ socketsAsServer=0x0000;
+};
+
+
+int GSM3MobileNetworkProvider::getNewOccupiedSocketAsServer()
+{
+ int i;
+ for(i=minSocketAsServer(); i<=maxSocketAsServer(); i++)
+ {
+ if ((!(socketsAsServer&(0x0001<<i))) && getSocketAsServerModemStatus(i))
+ {
+ socketsAsServer|=((0x0001)<<i);
+ //Serial.print("New occupied=");Serial.println(i);
+ return i;
+ }
+ }
+ //Serial.println("No new occupied");
+ return -1;
+}
+
+
+bool GSM3MobileNetworkProvider::getStatusSocketAsServer(uint8_t socket)
+{
+ if(socketsAsServer&(0x0001<<socket))
+ return 1;
+ else
+ return 0;
+};
+
+
+
+
diff --git a/libraries/GSM/GSM3MobileNetworkProvider.h b/libraries/GSM/GSM3MobileNetworkProvider.h new file mode 100644 index 0000000..7def6ee --- /dev/null +++ b/libraries/GSM/GSM3MobileNetworkProvider.h @@ -0,0 +1,136 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef _GSM3MOBILENETWORKPROVIDER_
+#define _GSM3MOBILENETWORKPROVIDER_
+
+#include <GSM3MobileAccessProvider.h>
+#include <inttypes.h>
+#include <stddef.h>
+#include <IPAddress.h>
+
+class GSM3MobileNetworkProvider
+{
+ private:
+
+ /** Restart hardware
+ @return 1 if successful
+ */
+ int HWrestart();
+
+ uint16_t socketsAsServer; // Server socket
+
+ /** Get modem status
+ @param s Socket
+ @return modem status (true if connected)
+ */
+ virtual inline bool getSocketAsServerModemStatus(int s){return false;};
+
+ public:
+
+ /** minSocketAsServer
+ @return 0
+ */
+ virtual inline int minSocketAsServer(){return 0;};
+
+ /** maxSocketAsServer
+ @return 0
+ */
+ virtual inline int maxSocketAsServer(){return 0;};
+
+ /** Get last command status
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ virtual int ready()=0;
+
+ /** Constructor */
+ GSM3MobileNetworkProvider();
+
+ /** Get network status
+ @return network status
+ */
+ virtual inline GSM3_NetworkStatus_t getStatus(){return ERROR;};
+
+ /** Get socket client status
+ @param socket Socket
+ @return 1 if connected, 0 otherwise
+ */
+ bool getStatusSocketClient(uint8_t socket);
+
+ /** Close a AT command
+ @param code Close code
+ */
+ virtual inline void closeCommand(int code){};
+
+ /** Establish a TCP connection
+ @param port Port
+ @param localIP IP address
+ @param localIPlength IP address size in characters
+ @return command error if exists
+ */
+ virtual inline int connectTCPServer(int port, char* localIP, int localIPlength){return 0;};
+
+ /** Get local IP address
+ @param LocalIP Buffer for save IP address
+ @param LocalIPlength Buffer size
+ */
+ virtual inline int getIP(char* LocalIP, int LocalIPlength){return 0;};
+
+ /** Get new occupied socket
+ @return -1 if no new socket has been occupied
+ */
+ int getNewOccupiedSocketAsServer();
+
+ /** Get socket status as server
+ @param socket Socket to get status
+ @return socket status
+ */
+ bool getStatusSocketAsServer(uint8_t socket);
+
+ /** Close a socket
+ @param client1Server0 1 if modem acts as client, 0 if acts as server
+ @param id_socket Local socket number
+ @return 0 if command running, 1 if success, otherwise error
+ */
+ int disconnectTCP(bool client1Server0, int idsocket){return 1;};
+
+ /** Release socket
+ @param socket Socket
+ */
+ void releaseSocket(int socket){};
+
+};
+
+extern GSM3MobileNetworkProvider* theProvider;
+
+#endif
diff --git a/libraries/GSM/GSM3MobileNetworkRegistry.cpp b/libraries/GSM/GSM3MobileNetworkRegistry.cpp new file mode 100644 index 0000000..5e22f3a --- /dev/null +++ b/libraries/GSM/GSM3MobileNetworkRegistry.cpp @@ -0,0 +1,51 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3MobileNetworkRegistry.h>
+
+GSM3MobileNetworkRegistry::GSM3MobileNetworkRegistry()
+{
+ theProvider=0;
+};
+
+void GSM3MobileNetworkRegistry::registerMobileNetworkProvider(GSM3MobileNetworkProvider* provider)
+{
+ theProvider=provider;
+}
+
+GSM3MobileNetworkProvider* GSM3MobileNetworkRegistry::getMobileNetworkProvider()
+{
+ return theProvider;
+}
+
+GSM3MobileNetworkRegistry theMobileNetworkRegistry;
diff --git a/libraries/GSM/GSM3MobileNetworkRegistry.h b/libraries/GSM/GSM3MobileNetworkRegistry.h new file mode 100644 index 0000000..de43977 --- /dev/null +++ b/libraries/GSM/GSM3MobileNetworkRegistry.h @@ -0,0 +1,63 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef _GSM3MOBILENETWORKREGISTRY_
+#define _GSM3MOBILENETWORKREGISTRY_
+#include <GSM3MobileNetworkProvider.h>
+
+class GSM3MobileNetworkRegistry
+{
+ private:
+
+ GSM3MobileNetworkProvider* theProvider; // Network provider
+
+ public:
+
+ /** Constructor */
+ GSM3MobileNetworkRegistry();
+
+ /** Register in mobile network provider
+ @param provider Provider
+ */
+ void registerMobileNetworkProvider(GSM3MobileNetworkProvider* provider);
+
+ /** Returns network provider object pointer
+ @return mobile network provider
+ */
+ GSM3MobileNetworkProvider* getMobileNetworkProvider();
+
+};
+
+extern GSM3MobileNetworkRegistry theMobileNetworkRegistry;
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileSMSProvider.cpp b/libraries/GSM/GSM3MobileSMSProvider.cpp new file mode 100644 index 0000000..b536330 --- /dev/null +++ b/libraries/GSM/GSM3MobileSMSProvider.cpp @@ -0,0 +1,3 @@ +#include <GSM3MobileSMSProvider.h> + +GSM3MobileSMSProvider* theGSM3SMSProvider; diff --git a/libraries/GSM/GSM3MobileSMSProvider.h b/libraries/GSM/GSM3MobileSMSProvider.h new file mode 100644 index 0000000..aa72711 --- /dev/null +++ b/libraries/GSM/GSM3MobileSMSProvider.h @@ -0,0 +1,91 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3MOBILESMSPROVIDER_ +#define _GSM3MOBILESMSPROVIDER_ + +class GSM3MobileSMSProvider +{ + public: + + /** Begin a SMS to send it + @param to Destination + @return error command if it exists + */ + virtual inline int beginSMS(const char* to){return 0;}; + + /** Write a SMS character by character + @param c Character + */ + virtual inline void writeSMS(const char c){}; + + /** End SMS + @return error command if it exists + */ + virtual inline int endSMS(){return 0;}; + + /** Check if SMS available and prepare it to be read + @return number of bytes in a received SMS + */ + virtual inline int availableSMS(){return 0;}; + + /** Read a byte but do not advance the buffer header (circular buffer) + @return character + */ + virtual inline int peekSMS(){return 0;}; + + /** Delete the SMS from Modem memory and proccess answer + */ + virtual inline void flushSMS(){return;}; + + /** Read sender number phone + @param number Buffer for save number phone + @param nlength Buffer length + @return 1 success, >1 error + */ + virtual inline int remoteSMSNumber(char* number, int nlength){return 0;}; + + /** Read one char for SMS buffer (advance circular buffer) + @return character + */ + virtual inline int readSMS(){return 0;}; + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + virtual int ready()=0; +}; + +extern GSM3MobileSMSProvider* theGSM3SMSProvider; + +#endif diff --git a/libraries/GSM/GSM3MobileServerProvider.cpp b/libraries/GSM/GSM3MobileServerProvider.cpp new file mode 100644 index 0000000..4739ac7 --- /dev/null +++ b/libraries/GSM/GSM3MobileServerProvider.cpp @@ -0,0 +1,5 @@ + #include <GSM3MobileServerProvider.h> + + GSM3MobileServerProvider* theGSM3MobileServerProvider; + +
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileServerProvider.h b/libraries/GSM/GSM3MobileServerProvider.h new file mode 100644 index 0000000..e4eb9c5 --- /dev/null +++ b/libraries/GSM/GSM3MobileServerProvider.h @@ -0,0 +1,95 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_MOBILESERVERPROVIDER__ +#define __GSM3_MOBILESERVERPROVIDER__ + + +#include <GSM3MobileAccessProvider.h> +#include <inttypes.h> +#include <stddef.h> + + +class GSM3MobileServerProvider +{ + /** Get socket status + @param s Socket + @return modem status (true if connected) + */ + virtual bool getSocketAsServerModemStatus(int s)=0; + + public: + + /** minSocketAsServer + @return socket + */ + virtual int minSocketAsServer()=0; + + /** maxSocketAsServer + @return socket + */ + virtual int maxSocketAsServer()=0; + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + virtual int ready()=0; + + /** Constructor */ + GSM3MobileServerProvider(){}; + + /** Connect server to TCP port + @param port TCP port + @return command error if exists + */ + virtual int connectTCPServer(int port)=0; + //virtual int getIP(char* LocalIP, int LocalIPlength)=0; + + /** Get new occupied socket as server + @return return -1 if no new socket has been occupied + */ + virtual int getNewOccupiedSocketAsServer()=0; + + /** Get socket status + @param socket Socket + @return socket status (true if connected) + */ + virtual bool getStatusSocketAsServer(uint8_t socket)=0; + + // virtual int disconnectTCP(bool client1Server0, int idsocket)=0; + +}; + +extern GSM3MobileServerProvider* theGSM3MobileServerProvider; + +#endif diff --git a/libraries/GSM/GSM3MobileServerService.cpp b/libraries/GSM/GSM3MobileServerService.cpp new file mode 100644 index 0000000..bf76cfc --- /dev/null +++ b/libraries/GSM/GSM3MobileServerService.cpp @@ -0,0 +1,159 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3MobileServerService.h>
+#include <GSM3MobileServerProvider.h>
+#include <GSM3MobileClientProvider.h>
+
+
+#define __TOUTSERVER__ 10000
+#define BUFFERSIZETWEET 100
+
+#define GSM3MOBILESERVERSERVICE_SYNCH 0x01 // 1: TRUE, compatible with other clients 0: FALSE
+
+// While there is only a shield (ShieldV1) we will include it by default
+#include <GSM3ShieldV1ServerProvider.h>
+GSM3ShieldV1ServerProvider theShieldV1ServerProvider;
+
+
+GSM3MobileServerService::GSM3MobileServerService(uint8_t port, bool synch)
+{
+ mySocket=0;
+ _port=port;
+ flags = 0;
+
+ // If synchronous
+ if(synch)
+ flags |= GSM3MOBILESERVERSERVICE_SYNCH;
+}
+
+// Returns 0 if last command is still executing
+// 1 if success
+// >1 if error
+int GSM3MobileServerService::ready()
+{
+ return theGSM3MobileServerProvider->ready();
+}
+
+void GSM3MobileServerService::begin()
+{
+ if(theGSM3MobileServerProvider==0)
+ return;
+ theGSM3MobileServerProvider->connectTCPServer(_port);
+
+ if(flags & GSM3MOBILESERVERSERVICE_SYNCH)
+ waitForAnswer();
+}
+
+GSM3MobileClientService GSM3MobileServerService::available(bool synch)
+{
+ int newSocket;
+ // In case we are debugging, we'll need to force a look at the buffer
+ ready();
+
+ newSocket=theGSM3MobileServerProvider->getNewOccupiedSocketAsServer();
+
+ // Instatiate new client. If we are synch, the client is synchronous/blocking
+ GSM3MobileClientService client((uint8_t)(newSocket), (flags & GSM3MOBILESERVERSERVICE_SYNCH));
+
+ return client;
+}
+
+size_t GSM3MobileServerService::write(uint8_t c)
+{
+// Adapt to the new, lean implementation
+// theGSM3MobileServerProvider->writeSocket(c);
+ return 1;
+}
+
+void GSM3MobileServerService::beginWrite()
+{
+// Adapt to the new, lean implementation
+// theGSM3MobileServerProvider->beginWriteSocket(local1Remote0, mySocket);
+}
+
+size_t GSM3MobileServerService::write(const uint8_t* buf)
+{
+// Adapt to the new, lean implementation
+// theGSM3MobileServerProvider->writeSocket((const char*)(buf));
+ return strlen((const char*)buf);
+}
+
+size_t GSM3MobileServerService::write(const uint8_t* buf, size_t sz)
+{
+// Adapt to the new, lean implementation
+// theGSM3MobileServerProvider->writeSocket((const char*)(buf));
+}
+
+void GSM3MobileServerService::endWrite()
+{
+// Adapt to the new, lean implementation
+// theGSM3MobileServerProvider->endWriteSocket();
+}
+
+void GSM3MobileServerService::stop()
+{
+
+ // Review, should be the server?
+ theGSM3MobileClientProvider->disconnectTCP(local1Remote0, mySocket);
+ if(flags & GSM3MOBILESERVERSERVICE_SYNCH)
+ waitForAnswer();
+ theGSM3MobileClientProvider->releaseSocket(mySocket);
+ mySocket = -1;
+}
+
+
+/*int GSM3MobileServerService::getIP(char* LocalIP, int LocalIPlength)
+{
+ return theGSM3MobileServerProvider->getIP(LocalIP, LocalIPlength);
+}*/
+
+int GSM3MobileServerService::waitForAnswer()
+{
+ unsigned long m;
+ m=millis();
+ int res;
+
+ while(((millis()-m)< __TOUTSERVER__ )&&(ready()==0))
+ delay(10);
+
+ res=ready();
+
+ // If we get something different from a 1, we are having a problem
+ if(res!=1)
+ res=0;
+
+ return res;
+}
+
+
diff --git a/libraries/GSM/GSM3MobileServerService.h b/libraries/GSM/GSM3MobileServerService.h new file mode 100644 index 0000000..12165ee --- /dev/null +++ b/libraries/GSM/GSM3MobileServerService.h @@ -0,0 +1,124 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef _GSM3MOBILESERVERSERVICE_
+#define _GSM3MOBILESERVERSERVICE_
+
+#include <GSM3MobileNetworkProvider.h>
+#include <GSM3MobileClientService.h>
+#include <Server.h>
+
+class GSM3MobileServerService : public Server
+{
+ private:
+
+ uint8_t _port; // Port
+ uint8_t mySocket; // Actual socket
+ uint8_t flags;
+ bool local1Remote0;
+
+ /** Internal utility, used in synchronous calls
+ @return operation result, 1 if success, 0 otherwise
+ */
+ int waitForAnswer();
+
+ public:
+
+ /** Constructor
+ @param port Port
+ @param synch True if the server acts synchronously
+ */
+ GSM3MobileServerService(uint8_t port, bool synch=true);
+
+ /** Get last command status
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int ready();
+
+ /** Initialize server
+ */
+ void begin();
+
+ /** Check if there is an incoming client request
+ @param synch If true, the returned client is synchronous or
+ blocking.
+ @return Client if successful, else error
+ */
+ GSM3MobileClientService available(bool synch=true);
+
+ // Just to keep in line with Ethernet.
+ // Write to every open socket...
+ //void write(uint8_t);
+ //void write(const uint8_t *buf, size_t size);
+
+ /** Begin write in socket
+ */
+ void beginWrite();
+
+ /** Write character in socket
+ @param c Character
+ @return size
+ */
+ size_t write(uint8_t c);
+
+ /** Write buffer in socket
+ @param buf Buffer
+ @return size
+ */
+ size_t write(const uint8_t *buf);
+
+ /** Write buffer in socket with size
+ @param buf Buffer
+ @param sz Buffer size
+ @return size
+ */
+ size_t write(const uint8_t *buf, size_t sz);
+
+ /** End write in socket
+ */
+ void endWrite();
+
+ /** Stop server
+ */
+ void stop();
+
+ // we take this function out as IPAddress is complex to bring to
+ // version 1.
+ // inline int connect(IPAddress ip, uint16_t port){return 0;};
+ // Returns 2 if there are no resources
+ //int getIP(char* LocalIP, int LocalIPlength);
+
+};
+
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3MobileVoiceProvider.cpp b/libraries/GSM/GSM3MobileVoiceProvider.cpp new file mode 100644 index 0000000..7af4e8f --- /dev/null +++ b/libraries/GSM/GSM3MobileVoiceProvider.cpp @@ -0,0 +1,4 @@ +#include <GSM3MobileVoiceProvider.h> + + +GSM3MobileVoiceProvider* theGSM3MobileVoiceProvider; diff --git a/libraries/GSM/GSM3MobileVoiceProvider.h b/libraries/GSM/GSM3MobileVoiceProvider.h new file mode 100644 index 0000000..2091a1b --- /dev/null +++ b/libraries/GSM/GSM3MobileVoiceProvider.h @@ -0,0 +1,90 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3MOBILEVOICEPROVIDER_ +#define _GSM3MOBILEVOICEPROVIDER_ + +enum GSM3_voiceCall_st { IDLE_CALL, CALLING, RECEIVINGCALL, TALKING}; + +class GSM3MobileVoiceProvider +{ + public: + + /** Initialize the object relating it to the general infrastructure + @param + @return void + */ + virtual void initialize(){}; + + /** Launch a voice call + @param number Phone number to be called + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + virtual int voiceCall(const char* number)=0; + + /** Answer a voice call + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + virtual int answerCall()=0; + + /** Hang a voice call + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + virtual int hangCall()=0; + + /** Retrieve phone number of caller + @param buffer Buffer for copy phone number + @param bufsize Buffer size + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + virtual int retrieveCallingNumber(char* buffer, int bufsize)=0; + + /** Returns voice call status + @return voice call status + */ + virtual GSM3_voiceCall_st getvoiceCallStatus()=0; + + /** Set voice call status + @param status New status for voice call + */ + virtual void setvoiceCallStatus(GSM3_voiceCall_st status)=0; + + /** Get last command status + @return Returns 0 if last command is still executing, 1 success, >1 error + */ + virtual int ready()=0; +}; + +extern GSM3MobileVoiceProvider* theGSM3MobileVoiceProvider; + +#endif diff --git a/libraries/GSM/GSM3SMSService.cpp b/libraries/GSM/GSM3SMSService.cpp new file mode 100644 index 0000000..378dc2c --- /dev/null +++ b/libraries/GSM/GSM3SMSService.cpp @@ -0,0 +1,126 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3SMSService.h>
+#include <GSM3MobileNetworkProvider.h>
+#include <Arduino.h>
+
+// While there is only a shield (ShieldV1) we will include it by default
+#include <GSM3ShieldV1SMSProvider.h>
+GSM3ShieldV1SMSProvider theShieldV1SMSProvider;
+
+#define GSM3SMSSERVICE_SYNCH 0x01 // 1: synchronous 0: asynchronous
+#define __TOUT__ 10000
+
+
+GSM3SMSService::GSM3SMSService(bool synch)
+{
+ if(synch)
+ flags |= GSM3SMSSERVICE_SYNCH;
+}
+
+// Returns 0 if last command is still executing
+// 1 if success
+// >1 if error
+int GSM3SMSService::ready()
+{
+ return theGSM3SMSProvider->ready();
+}
+
+int GSM3SMSService::beginSMS(const char *number)
+{
+ return waitForAnswerIfNeeded(theGSM3SMSProvider->beginSMS(number));
+};
+
+int GSM3SMSService::endSMS()
+{
+ return waitForAnswerIfNeeded(theGSM3SMSProvider->endSMS());
+};
+
+size_t GSM3SMSService::write(uint8_t c)
+{
+ theGSM3SMSProvider->writeSMS(c);
+ return 1;
+}
+
+void GSM3SMSService::flush()
+{
+ theGSM3SMSProvider->flushSMS();
+ waitForAnswerIfNeeded(1);
+};
+
+int GSM3SMSService::available()
+{
+ return waitForAnswerIfNeeded(theGSM3SMSProvider->availableSMS());
+};
+
+int GSM3SMSService::remoteNumber(char* number, int nlength)
+{
+ return theGSM3SMSProvider->remoteSMSNumber(number, nlength);
+
+}
+
+int GSM3SMSService::read()
+{
+ return theGSM3SMSProvider->readSMS();
+};
+int GSM3SMSService::peek()
+{
+ return theGSM3SMSProvider->peekSMS();
+};
+
+int GSM3SMSService::waitForAnswerIfNeeded(int returnvalue)
+{
+ // If synchronous
+ if(flags & GSM3SMSSERVICE_SYNCH )
+ {
+ unsigned long m;
+ m=millis();
+ // Wait for __TOUT__
+ while(((millis()-m)< __TOUT__ )&&(ready()==0))
+ delay(100);
+ // If everything was OK, return 1
+ // else (timeout or error codes) return 0;
+ if(ready()==1)
+ return 1;
+ else
+ return 0;
+ }
+ // If not synchronous just kick ahead the coming result
+ return ready();
+}
+
+
+
+
+
diff --git a/libraries/GSM/GSM3SMSService.h b/libraries/GSM/GSM3SMSService.h new file mode 100644 index 0000000..878be11 --- /dev/null +++ b/libraries/GSM/GSM3SMSService.h @@ -0,0 +1,110 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef _GSM3SMSSERVICE_
+#define _GSM3SMSSERVICE_
+
+#include <GSM3MobileSMSProvider.h>
+#include <Stream.h>
+
+class GSM3SMSService : public Stream
+{
+ private:
+
+ uint8_t flags;
+
+ /** Makes synchronous the functions, if needed
+ @param returnvalue Return value
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int waitForAnswerIfNeeded(int returnvalue);
+
+ public:
+
+ /** Constructor
+ @param synch Determines sync mode
+ */
+ GSM3SMSService(bool synch=true);
+
+ /** Write a character in SMS message
+ @param c Character
+ @return size
+ */
+ size_t write(uint8_t c);
+
+ /** Begin a SMS to send it
+ @param to Destination
+ @return error command if it exists
+ */
+ int beginSMS(const char* to);
+
+ /** Get last command status
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int ready();
+
+ /** End SMS
+ @return error command if it exists
+ */
+ int endSMS();
+
+ /** Check if SMS available and prepare it to be read
+ @return number of bytes in a received SMS
+ */
+ int available();
+
+ /** Read sender number phone
+ @param number Buffer for save number phone
+ @param nlength Buffer length
+ @return 1 success, >1 error
+ */
+ int remoteNumber(char* number, int nlength);
+
+ /** Read one char for SMS buffer (advance circular buffer)
+ @return byte
+ */
+ int read();
+
+ /** Read a byte but do not advance the buffer header (circular buffer)
+ @return byte
+ */
+ int peek();
+
+ /** Delete the SMS from Modem memory and proccess answer
+ */
+ void flush();
+
+};
+
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1.cpp b/libraries/GSM/GSM3ShieldV1.cpp new file mode 100644 index 0000000..d594874 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1.cpp @@ -0,0 +1,96 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3ShieldV1.h>
+#include <HardwareSerial.h>
+#include <Arduino.h>
+
+#define __RESETPIN__ 7
+#define __TOUTLOCALCOMS__ 500
+#define __TOUTSHUTDOWN__ 5000
+#define __TOUTMODEMCONFIGURATION__ 5000//equivalent to 30000 because of time in interrupt routine.
+#define __TOUTAT__ 1000
+#define __TOUTSMS__ 7000
+#define __TOUTCALL__ 15000
+#define __TOUTGPRS__ 10000
+#define __NCLIENTS_MAX__ 3
+
+//Constructor.
+GSM3ShieldV1::GSM3ShieldV1(bool db)
+{
+ theGSM3ShieldV1ModemCore.setCommandCounter(1);
+ socketsAccepted=0;
+ theGSM3ShieldV1ModemCore.registerUMProvider(this);
+ theProvider=this;
+}
+
+//Response management.
+void GSM3ShieldV1::manageResponse(byte from, byte to)
+{
+ switch(theGSM3ShieldV1ModemCore.getOngoingCommand())
+ {
+ case NONE:
+ theGSM3ShieldV1ModemCore.gss.cb.deleteToTheEnd(from);
+ break;
+
+ }
+}
+
+//Function for 2 sec delay inside an interruption.
+void GSM3ShieldV1::delayInsideInterrupt2seg()
+{
+ for (int k=0;k<40;k++) theGSM3ShieldV1ModemCore.gss.tunedDelay(50000);
+}
+
+///////////////////////////////////////////////////////UNSOLICITED RESULT CODE (URC) FUNCTIONS///////////////////////////////////////////////////////////////////
+
+//URC recognize.
+bool GSM3ShieldV1::recognizeUnsolicitedEvent(byte oldTail)
+{
+
+int nlength;
+char auxLocate [15];
+ //POWER DOWN.
+ prepareAuxLocate(PSTR("POWER DOWN"), auxLocate);
+ if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate))
+ {
+ theGSM3ShieldV1ModemCore.gss.cb.flush();
+ return true;
+ }
+
+
+ return false;
+}
+
+
+
diff --git a/libraries/GSM/GSM3ShieldV1.h b/libraries/GSM/GSM3ShieldV1.h new file mode 100644 index 0000000..db52f7b --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1.h @@ -0,0 +1,137 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef __GSM3_SHIELDV1__
+#define __GSM3_SHIELDV1__
+
+#include <GSM3MobileNetworkProvider.h>
+#include <GSM3ShieldV1ModemCore.h>
+#include <GSM3ShieldV1BaseProvider.h>
+#include <Arduino.h>
+
+
+class GSM3ShieldV1 : public GSM3MobileNetworkProvider, public GSM3ShieldV1BaseProvider
+{
+ // General code, for modem management
+ private:
+
+ /** Delay inside an interrupt (2 seconds)
+ */
+ void delayInsideInterrupt2seg();
+
+ // Code for SMS Service
+ private:
+
+
+ long commandMillis;
+ bool commandSent;
+
+ const char* pinConfig; //PIN.
+ char* accessPoint; //APN.
+ char* userName; //User.
+ char* passw; //Password.
+ const char* remoteID; //Server.
+
+ char* dataSocket; //Data socket.
+ int local_Port; //Local Port.
+ char* local_IP; //Local IP.
+ int local_IP_Length; //Local IP length.
+
+
+ int socketDataSize; //Size of socket data to be read.
+ int socketDataSizeWritten; //Number of socket data written in buffer not to overflow the buffer
+
+ int socketsAccepted; //Status for remote clients accepted of closed.
+
+ public:
+
+ /** Constructor **/
+ GSM3ShieldV1(bool debug=false);
+
+ /** Manages modem response
+ @param from Initial byte of buffer
+ @param to Final byte of buffer
+ */
+ void manageResponse(byte from, byte to);
+
+ /** Get last command status
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int ready(){return GSM3ShieldV1BaseProvider::ready();};
+
+ /** Parse modem response
+ @param rsp Returns true if expected response exists
+ @param string1 Substring expected in response
+ @param string2 Second substring expected in response
+ @return true if parsed successful
+ */
+ bool genericParse_rsp2(bool& rsp, char* string1, char* string2);
+
+ /** Recognize URC
+ @param oldTail
+ @return true if successful
+ */
+ bool recognizeUnsolicitedEvent(byte oldTail);
+
+ /** Receive answer
+ @return true if successful
+ */
+ bool answerReceived();
+
+ /** Receive socket
+ @param id_socket Socket ID
+ @return true if successful
+ */
+ bool socketReceived(int id_socket);
+
+ /** Update active ID sockets
+ @param active Active sockets
+ @param ID Id for update
+ */
+ void update_activeIDsockets (bool active, int ID);
+
+ /** Assign ID to socket
+ @param ID Id to assign to socket
+ @return true if successful
+ */
+ bool assignIDsocket (int& ID);
+
+ /** Close data socket
+ @return true if successful
+ */
+ bool closedDataSocket(); //Flag closed current data socket.
+
+ //bool writeIncomingCalls(char* bufferForCallerId) If isn't zero, doesn't wait calls
+};
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1AccessProvider.cpp b/libraries/GSM/GSM3ShieldV1AccessProvider.cpp new file mode 100644 index 0000000..67ae755 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1AccessProvider.cpp @@ -0,0 +1,296 @@ +#include <GSM3ShieldV1AccessProvider.h> +#include <Arduino.h> + +#define __RESETPIN__ 7 +#define __TOUTSHUTDOWN__ 5000 +#define __TOUTMODEMCONFIGURATION__ 5000//equivalent to 30000 because of time in interrupt routine. +#define __TOUTAT__ 1000 + +char _command_AT[] PROGMEM = "AT"; +char _command_CGREG[] PROGMEM = "AT+CGREG?"; + + +GSM3ShieldV1AccessProvider::GSM3ShieldV1AccessProvider(bool debug) +{ + theGSM3ShieldV1ModemCore.setDebug(debug); + +} + +void GSM3ShieldV1AccessProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case MODEMCONFIG: + ModemConfigurationContinue(); + break; + case ALIVETEST: + isModemAliveContinue(); + break; + } +} + +///////////////////////////////////////////////////////CONFIGURATION FUNCTIONS/////////////////////////////////////////////////////////////////// + +// Begin +// Restart or start the modem +// May be synchronous +GSM3_NetworkStatus_t GSM3ShieldV1AccessProvider::begin(char* pin, bool restart, bool synchronous) +{ + pinMode(__RESETPIN__, OUTPUT); + + // If asked for modem restart, restart + if (restart) + HWrestart(); + else + HWstart(); + + theGSM3ShieldV1ModemCore.gss.begin(9600); + // Launch modem configuration commands + ModemConfiguration(pin); + // If synchronous, wait till ModemConfiguration is over + if(synchronous) + { + // if we shorten this delay, the command fails + while(ready()==0) + delay(1000); + } + return getStatus(); +} + +//HWrestart. +int GSM3ShieldV1AccessProvider::HWrestart() +{ + + theGSM3ShieldV1ModemCore.setStatus(IDLE); + digitalWrite(__RESETPIN__, HIGH); + delay(12000); + digitalWrite(__RESETPIN__, LOW); + delay(1000); + return 1; //configandwait(pin); +} + +//HWrestart. +int GSM3ShieldV1AccessProvider::HWstart() +{ + + theGSM3ShieldV1ModemCore.setStatus(IDLE); + digitalWrite(__RESETPIN__, HIGH); + delay(2000); + digitalWrite(__RESETPIN__, LOW); + //delay(1000); + + return 1; //configandwait(pin); +} + +//Initial configuration main function. +int GSM3ShieldV1AccessProvider::ModemConfiguration(char* pin) +{ + theGSM3ShieldV1ModemCore.setPhoneNumber(pin); + theGSM3ShieldV1ModemCore.openCommand(this,MODEMCONFIG); + theGSM3ShieldV1ModemCore.setStatus(CONNECTING); + ModemConfigurationContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Initial configuration continue function. +void GSM3ShieldV1AccessProvider::ModemConfigurationContinue() +{ + bool resp; + + // 1: Send AT + // 2: Wait AT OK and SetPin or CGREG + // 3: Wait Pin OK and CGREG + // 4: Wait CGREG and Flow SW control or CGREG + // 5: Wait IFC OK and SMS Text Mode + // 6: Wait SMS text Mode OK and Calling line identification + // 7: Wait Calling Line Id OK and Echo off + // 8: Wait for OK and COLP command for connecting line identification. + // 9: Wait for OK. + int ct=theGSM3ShieldV1ModemCore.getCommandCounter(); + if(ct==1) + { + // Launch AT + theGSM3ShieldV1ModemCore.setCommandCounter(2); + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_AT); + } + else if(ct==2) + { + // Wait for AT - OK. + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + // OK received + if(theGSM3ShieldV1ModemCore.getPhoneNumber() && (theGSM3ShieldV1ModemCore.getPhoneNumber()[0]!=0)) + { + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+CPIN="), false); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + theGSM3ShieldV1ModemCore.genericCommand_rqc(theGSM3ShieldV1ModemCore.getPhoneNumber()); + } + else + { + //DEBUG + //Serial.println("AT+CGREG?"); + theGSM3ShieldV1ModemCore.setCommandCounter(4); + theGSM3ShieldV1ModemCore.takeMilliseconds(); + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_CGREG); + } + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==3) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + theGSM3ShieldV1ModemCore.setCommandCounter(4); + theGSM3ShieldV1ModemCore.takeMilliseconds(); + theGSM3ShieldV1ModemCore.delayInsideInterrupt(2000); + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_CGREG); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==4) + { + char auxLocate1 [12]; + char auxLocate2 [12]; + prepareAuxLocate(PSTR("+CGREG: 0,1"), auxLocate1); + prepareAuxLocate(PSTR("+CGREG: 0,5"), auxLocate2); + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp, auxLocate1, auxLocate2)) + { + if(resp) + { + theGSM3ShieldV1ModemCore.setCommandCounter(5); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+IFC=1,1")); + } + else + { + // If not, launch command again + if(theGSM3ShieldV1ModemCore.takeMilliseconds() > __TOUTMODEMCONFIGURATION__) + { + theGSM3ShieldV1ModemCore.closeCommand(3); + } + else + { + theGSM3ShieldV1ModemCore.delayInsideInterrupt(2000); + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_CGREG); + } + } + } + } + else if(ct==5) + { + // 5: Wait IFC OK + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + //Delay for SW flow control being active. + theGSM3ShieldV1ModemCore.delayInsideInterrupt(2000); + // 9: SMS Text Mode + theGSM3ShieldV1ModemCore.setCommandCounter(6); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+CMGF=1")); + } + } + else if(ct==6) + { + // 6: Wait SMS text Mode OK + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + //Calling line identification + theGSM3ShieldV1ModemCore.setCommandCounter(7); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+CLIP=1")); + } + } + else if(ct==7) + { + // 7: Wait Calling Line Id OK + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Echo off + theGSM3ShieldV1ModemCore.setCommandCounter(8); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("ATE0")); + } + } + else if(ct==8) + { + // 8: Wait ATEO OK, send COLP + // In Arduino Mega, attention, take away the COLP step + // It looks as we can only have 8 steps + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + theGSM3ShieldV1ModemCore.setCommandCounter(9); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+COLP=1")); + } + } + else if(ct==9) + { + // 9: Wait ATCOLP OK + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if (resp) + { + theGSM3ShieldV1ModemCore.setStatus(GSM_READY); + theGSM3ShieldV1ModemCore.closeCommand(1); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } +} + +//Alive Test main function. +int GSM3ShieldV1AccessProvider::isAccessAlive() +{ + theGSM3ShieldV1ModemCore.setCommandError(0); + theGSM3ShieldV1ModemCore.setCommandCounter(1); + theGSM3ShieldV1ModemCore.openCommand(this,ALIVETEST); + isModemAliveContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Alive Test continue function. +void GSM3ShieldV1AccessProvider::isModemAliveContinue() +{ +bool rsp; +switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_AT); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(rsp)) + { + if (rsp) theGSM3ShieldV1ModemCore.closeCommand(1); + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Shutdown. +bool GSM3ShieldV1AccessProvider::shutdown() +{ + unsigned long m; + bool resp; + char auxLocate [18]; + + // It makes no sense to have an asynchronous shutdown + pinMode(__RESETPIN__, OUTPUT); + digitalWrite(__RESETPIN__, HIGH); + delay(1500); + digitalWrite(__RESETPIN__, LOW); + theGSM3ShieldV1ModemCore.setStatus(IDLE); + theGSM3ShieldV1ModemCore.gss.close(); + + m=millis(); + prepareAuxLocate(PSTR("POWER DOWN"), auxLocate); + while((millis()-m) < __TOUTSHUTDOWN__) + { + delay(1); + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp, auxLocate)) + return resp; + } + return false; +} + diff --git a/libraries/GSM/GSM3ShieldV1AccessProvider.h b/libraries/GSM/GSM3ShieldV1AccessProvider.h new file mode 100644 index 0000000..1ddcc8c --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1AccessProvider.h @@ -0,0 +1,116 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3SHIELDV1ACCESSPROVIDER_ +#define _GSM3SHIELDV1ACCESSPROVIDER_ + +#include <GSM3MobileAccessProvider.h> +#include <GSM3ShieldV1ModemCore.h> +#include <GSM3ShieldV1BaseProvider.h> + +class GSM3ShieldV1AccessProvider : public GSM3MobileAccessProvider, public GSM3ShieldV1BaseProvider +{ + private: + + /** Initialize main modem configuration + @param pin PIN code + @return command error if exists + */ + int ModemConfiguration(char* pin); + + /** Continue to modem configuration function + */ + void ModemConfigurationContinue(); + + /** Continue to check if modem alive function + */ + void isModemAliveContinue(); + + + public: + + /** Constructor + @param debug Determines debug mode + */ + + GSM3ShieldV1AccessProvider(bool debug=false); + + /** Start the GSM/GPRS modem, attaching to the GSM network + @param pin SIM PIN number (4 digits in a string, example: "1234"). If + NULL the SIM has no configured PIN. + @param restart Restart the modem. Default is TRUE. The modem receives + a signal through the Ctrl/D7 pin. If it is shut down, it will + start-up. If it is running, it will restart. Takes up to 10 + seconds + @param synchronous If TRUE the call only returns after the Start is complete + or fails. If FALSE the call will return inmediately. You have + to call repeatedly ready() until you get a result. Default is TRUE. + @return If synchronous, GSM3_NetworkStatus_t. If asynchronous, returns 0. + */ + GSM3_NetworkStatus_t begin(char* pin=0,bool restart=true, bool synchronous=true); + + /** Check network access status + @return 1 if Alive, 0 if down + */ + int isAccessAlive(); + + /** Shutdown the modem (power off really) + @return true if successful + */ + bool shutdown(); + + /** Returns 0 if last command is still executing + @return 1 if success, >1 if error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + /** Returns modem status + @return modem network status + */ + inline GSM3_NetworkStatus_t getStatus(){return theGSM3ShieldV1ModemCore.getStatus();}; + + void manageResponse(byte from, byte to); + + /** Restart the modem (will shut down if running) + @return 1 if success, >1 if error + */ + int HWrestart(); + + /** Start the modem (will not shut down if running) + @return 1 if success, >1 if error + */ + int HWstart(); + +}; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1BandManagement.cpp b/libraries/GSM/GSM3ShieldV1BandManagement.cpp new file mode 100644 index 0000000..94dec9a --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1BandManagement.cpp @@ -0,0 +1,67 @@ +#include <GSM3ShieldV1BandManagement.h> + +GSM3ShieldV1BandManagement::GSM3ShieldV1BandManagement(bool trace): modem(trace) +{ + quectelStrings[UNDEFINED]=""; + quectelStrings[EGSM_MODE]="\"EGSM_MODE\""; + quectelStrings[DCS_MODE]="\"DCS_MODE\""; + quectelStrings[PCS_MODE]="\"PCS_MODE\""; + quectelStrings[EGSM_DCS_MODE]="\"EGSM_DCS_MODE\""; + quectelStrings[GSM850_PCS_MODE]="\"GSM850_PCS_MODE\""; + quectelStrings[GSM850_EGSM_DCS_PCS_MODE]="\"GSM850_EGSM_DCS_PCS_MODE\""; +} + +GSM3_NetworkStatus_t GSM3ShieldV1BandManagement::begin() +{ + // check modem response + modem.begin(); + + // reset hardware + modem.restartModem(); + + return IDLE; +} + +String GSM3ShieldV1BandManagement::getBand() +{ + String modemResponse=modem.writeModemCommand("AT+QBAND?", 2000); + + for(GSM3GSMBand i=GSM850_EGSM_DCS_PCS_MODE;i>UNDEFINED;i=(GSM3GSMBand)((int)i-1)) + { + if(modemResponse.indexOf(quectelStrings[i])>=0) + return quectelStrings[i]; + } + + Serial.print("Unrecognized modem answer:"); + Serial.println(modemResponse); + + return ""; +} + +bool GSM3ShieldV1BandManagement::setBand(String band) +{ + String command; + String modemResponse; + bool found=false; + + command="AT+QBAND="; + for(GSM3GSMBand i=EGSM_MODE;((i<=GSM850_EGSM_DCS_PCS_MODE)&&(!found));i=(GSM3GSMBand)((int)i+1)) + { + String aux=quectelStrings[i]; + if(aux.indexOf(band)>=0) + { + command+=aux; + found=true; + } + } + + if(!found) + return false; + // Quad-band takes an awful lot of time + modemResponse=modem.writeModemCommand(command, 15000); + + if(modemResponse.indexOf("QBAND")>=0) + return true; + else + return false; +}
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1BandManagement.h b/libraries/GSM/GSM3ShieldV1BandManagement.h new file mode 100644 index 0000000..919d4ad --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1BandManagement.h @@ -0,0 +1,96 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3SHIELDV1BANDMANAGEMENT__ +#define __GSM3SHIELDV1BANDMANAGEMENT__ + +// This class executes band management functions for the ShieldV1 +#include <GSM3ShieldV1DirectModemProvider.h> + +#define NUMBEROFBANDS 7 +#define GSM_MODE_UNDEFINED "UNDEFINED" +#define GSM_MODE_EGSM "EGSM_MODE" +#define GSM_MODE_DCS "DCS_MODE" +#define GSM_MODE_PCS "PCS_MODE" +#define GSM_MODE_EGSM_DCS "EGSM_DCS_MODE" +#define GSM_MODE_GSM850_PCS "GSM850_PCS_MODE" +#define GSM_MODE_GSM850_EGSM_DCS_PCS "GSM850_EGSM_DCS_PCS_MODE" + +typedef enum GSM3GSMBand {UNDEFINED, EGSM_MODE, DCS_MODE, PCS_MODE, EGSM_DCS_MODE, GSM850_PCS_MODE, GSM850_EGSM_DCS_PCS_MODE}; + +// +// These are the bands and scopes: +// +// E-GSM(900) +// DCS(1800) +// PCS(1900) +// E-GSM(900)+DCS(1800) ex: Europe +// GSM(850)+PCS(1900) Ex: USA, South Am. +// GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900) + +class GSM3ShieldV1BandManagement +{ + private: + + GSM3ShieldV1DirectModemProvider modem; // Direct access to modem + + char* quectelStrings[NUMBEROFBANDS];// = {"\"EGSM_MODE\"", "\"DCS_MODE\"", "\"PCS_MODE\"", + //"\"EGSM_DCS_MODE\"", "\"GSM850_PCS_MODE\"", + //"\"GSM850_EGSM_DCS_PCS_MODE\""}; + + + public: + + /** Constructor + @param trace If true, dumps all AT dialogue to Serial + */ + GSM3ShieldV1BandManagement(bool trace=false); + + /** Forces modem hardware restart, so we begin from scratch + @return always returns IDLE status + */ + GSM3_NetworkStatus_t begin(); + + /** Get current modem work band + @return current modem work band + */ + String getBand(); + + /** Changes the modem operating band + @param band Desired new band + @return true if success, false otherwise + */ + bool setBand(String band); + +}; +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1BaseProvider.cpp b/libraries/GSM/GSM3ShieldV1BaseProvider.cpp new file mode 100644 index 0000000..d63967b --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1BaseProvider.cpp @@ -0,0 +1,27 @@ +#include <GSM3ShieldV1BaseProvider.h> +#include <GSM3ShieldV1ModemCore.h> +#include <Arduino.h> + +// Returns 0 if last command is still executing +// 1 if success +// >1 if error +int GSM3ShieldV1BaseProvider::ready() +{ + theGSM3ShieldV1ModemCore.manageReceivedData(); + + return theGSM3ShieldV1ModemCore.getCommandError(); +}; + +void GSM3ShieldV1BaseProvider::prepareAuxLocate(PROGMEM prog_char str[], char auxLocate[]) +{ + int i=0; + char c; + + do + { + c=pgm_read_byte_near(str + i); + auxLocate[i]=c; + i++; + } while (c!=0); +} + diff --git a/libraries/GSM/GSM3ShieldV1BaseProvider.h b/libraries/GSM/GSM3ShieldV1BaseProvider.h new file mode 100644 index 0000000..802d46c --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1BaseProvider.h @@ -0,0 +1,73 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3SHIELDV1BASEPROVIDER_ +#define _GSM3SHIELDV1BASEPROVIDER_ + +#include <GSM3SoftSerial.h> + +enum GSM3_commandType_e { XON, NONE, MODEMCONFIG, ALIVETEST, BEGINSMS, ENDSMS, AVAILABLESMS, FLUSHSMS, + VOICECALL, ANSWERCALL, HANGCALL, RETRIEVECALLINGNUMBER, + ATTACHGPRS, DETACHGPRS, CONNECTTCPCLIENT, DISCONNECTTCP, BEGINWRITESOCKET, ENDWRITESOCKET, + AVAILABLESOCKET, FLUSHSOCKET, CONNECTSERVER, GETIP, GETCONNECTSTATUS, GETLOCATION, GETICCID}; + +class GSM3ShieldV1BaseProvider +{ + public: + + /** Get last command status + @return Returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(); + + /** This function locates strings from PROGMEM in the buffer + @param str PROGMEN + @param auxLocate Buffer where to locate strings + */ + void prepareAuxLocate(PROGMEM prog_char str[], char auxLocate[]); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + virtual void manageResponse(byte from, byte to); + + /** Recognize URC + @param from + @return true if successful (default: false) + */ + virtual bool recognizeUnsolicitedEvent(byte from){return false;}; + +}; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1CellManagement.cpp b/libraries/GSM/GSM3ShieldV1CellManagement.cpp new file mode 100644 index 0000000..2af91ab --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1CellManagement.cpp @@ -0,0 +1,168 @@ +#include <GSM3ShieldV1CellManagement.h> + +GSM3ShieldV1CellManagement::GSM3ShieldV1CellManagement() +{ +} + +bool GSM3ShieldV1CellManagement::parseQCCID_available(bool& rsp) +{ + char c; + bool iccidFound = false; + int i = 0; + + while(((c = theGSM3ShieldV1ModemCore.theBuffer().read()) != 0) & (i < 19)) + { + if((c < 58) & (c > 47)) + iccidFound = true; + + if(iccidFound) + { + bufferICCID[i] = c; + i++; + } + } + bufferICCID[i]=0; + + return true; +} + +bool GSM3ShieldV1CellManagement::parseQENG_available(bool& rsp) +{ + char c; + char location[50] = ""; + int i = 0; + + if (!(theGSM3ShieldV1ModemCore.theBuffer().chopUntil("+QENG: ", true))) + rsp = false; + else + rsp = true; + + if (!(theGSM3ShieldV1ModemCore.theBuffer().chopUntil("+QENG:", true))) + rsp = false; + else + rsp = true; + + while(((c = theGSM3ShieldV1ModemCore.theBuffer().read()) != 0) & (i < 50)) + { + location[i] = c; + i++; + } + location[i]=0; + + char* res_tok = strtok(location, ","); + res_tok=strtok(NULL, ","); + strcpy(countryCode, res_tok); + res_tok=strtok(NULL, ","); + strcpy(networkCode, res_tok); + res_tok=strtok(NULL, ","); + strcpy(locationArea, res_tok); + res_tok=strtok(NULL, ","); + strcpy(cellId, res_tok); + + return true; +} + +int GSM3ShieldV1CellManagement::getLocation(char *country, char *network, char *area, char *cell) +{ + if((theGSM3ShieldV1ModemCore.getStatus() != GSM_READY) && (theGSM3ShieldV1ModemCore.getStatus() != GPRS_READY)) + return 2; + + countryCode=country; + networkCode=network; + locationArea=area; + cellId=cell; + + theGSM3ShieldV1ModemCore.openCommand(this,GETLOCATION); + getLocationContinue(); + + unsigned long timeOut = millis(); + while(((millis() - timeOut) < 5000) & (ready() == 0)); + + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +void GSM3ShieldV1CellManagement::getLocationContinue() +{ + bool resp; + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.gss.tunedDelay(3000); + delay(3000); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QENG=1"), false); + theGSM3ShieldV1ModemCore.print("\r"); + break; + case 2: + if (theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + theGSM3ShieldV1ModemCore.gss.tunedDelay(3000); + delay(3000); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QENG?"), false); + theGSM3ShieldV1ModemCore.print("\r"); + } + else theGSM3ShieldV1ModemCore.closeCommand(1); + break; + case 3: + if (resp) + { + parseQENG_available(resp); + theGSM3ShieldV1ModemCore.closeCommand(3); + } + else theGSM3ShieldV1ModemCore.closeCommand(2); + break; + } +} + +int GSM3ShieldV1CellManagement::getICCID(char *iccid) +{ + if((theGSM3ShieldV1ModemCore.getStatus() != GSM_READY) && (theGSM3ShieldV1ModemCore.getStatus() != GPRS_READY)) + return 2; + + bufferICCID=iccid; + theGSM3ShieldV1ModemCore.openCommand(this,GETICCID); + getICCIDContinue(); + + unsigned long timeOut = millis(); + while(((millis() - timeOut) < 5000) & (ready() == 0)); + + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +void GSM3ShieldV1CellManagement::getICCIDContinue() +{ + bool resp; + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.setCommandCounter(2); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QCCID"), false); + theGSM3ShieldV1ModemCore.print("\r"); + break; + case 2: + if (theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + parseQCCID_available(resp); + theGSM3ShieldV1ModemCore.closeCommand(2); + } + else theGSM3ShieldV1ModemCore.closeCommand(1); + break; + } +} + +void GSM3ShieldV1CellManagement::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case NONE: + theGSM3ShieldV1ModemCore.gss.cb.deleteToTheEnd(from); + break; + case GETLOCATION: + getLocationContinue(); + break; + case GETICCID: + getICCIDContinue(); + break; + } +}
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1CellManagement.h b/libraries/GSM/GSM3ShieldV1CellManagement.h new file mode 100644 index 0000000..78307da --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1CellManagement.h @@ -0,0 +1,92 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_SHIELDV1CELLMANAGEMENT__ +#define __GSM3_SHIELDV1CELLMANAGEMENT__ + +#include <GSM3ShieldV1ModemCore.h> +#include <GSM3MobileCellManagement.h> +#include <GSM3ShieldV1CellManagement.h> + +class GSM3ShieldV1CellManagement : public GSM3MobileCellManagement, public GSM3ShieldV1BaseProvider +{ + public: + + /** Constructor + */ + GSM3ShieldV1CellManagement(); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to); + + /** getLocation + @return current cell location + */ + int getLocation(char *country, char *network, char *area, char *cell); + + /** getICCID + */ + int getICCID(char *iccid); + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + private: + + char *countryCode; + char *networkCode; + char *locationArea; + char *cellId; + + char *bufferICCID; + + /** Continue to getLocation function + */ + void getLocationContinue(); + + /** Continue to getICCID function + */ + void getICCIDContinue(); + + bool parseQENG_available(bool& rsp); + + bool parseQCCID_available(bool& rsp); + +}; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1ClientProvider.cpp b/libraries/GSM/GSM3ShieldV1ClientProvider.cpp new file mode 100644 index 0000000..92d3e85 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ClientProvider.cpp @@ -0,0 +1,294 @@ +#include <GSM3ShieldV1ClientProvider.h> +#include <GSM3ShieldV1ModemCore.h> + +GSM3ShieldV1ClientProvider::GSM3ShieldV1ClientProvider() +{ + theGSM3MobileClientProvider=this; +}; + +//Response management. +void GSM3ShieldV1ClientProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case NONE: + theGSM3ShieldV1ModemCore.gss.cb.deleteToTheEnd(from); + break; + case CONNECTTCPCLIENT: + connectTCPClientContinue(); + break; + case FLUSHSOCKET: + flushSocketContinue(); + break; + } +} + +//Connect TCP main function. +int GSM3ShieldV1ClientProvider::connectTCPClient(const char* server, int port, int id_socket) +{ + theGSM3ShieldV1ModemCore.setPort(port); + idSocket = id_socket; + + theGSM3ShieldV1ModemCore.setPhoneNumber((char*)server); + theGSM3ShieldV1ModemCore.openCommand(this,CONNECTTCPCLIENT); + theGSM3ShieldV1ModemCore.registerUMProvider(this); + connectTCPClientContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +int GSM3ShieldV1ClientProvider::connectTCPClient(IPAddress add, int port, int id_socket) +{ + remoteIP=add; + theGSM3ShieldV1ModemCore.setPhoneNumber(0); + return connectTCPClient(0, port, id_socket); +} + +//Connect TCP continue function. +void GSM3ShieldV1ClientProvider::connectTCPClientContinue() +{ + bool resp; + // 0: Dot or DNS notation activation + // 1: Disable SW flow control + // 2: Waiting for IFC OK + // 3: Start-up TCP connection "AT+QIOPEN" + // 4: Wait for connection OK + // 5: Wait for CONNECT + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIDNSIP="), false); + if ((theGSM3ShieldV1ModemCore.getPhoneNumber()!=0)&& + ((*(theGSM3ShieldV1ModemCore.getPhoneNumber())<'0')||((*(theGSM3ShieldV1ModemCore.getPhoneNumber())>'9')))) + { + theGSM3ShieldV1ModemCore.print('1'); + theGSM3ShieldV1ModemCore.print('\r'); + } + else + { + theGSM3ShieldV1ModemCore.print('0'); + theGSM3ShieldV1ModemCore.print('\r'); + } + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + //Response received + if(resp) + { + // AT+QIOPEN + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIOPEN="),false); + theGSM3ShieldV1ModemCore.print("\"TCP\",\""); + if(theGSM3ShieldV1ModemCore.getPhoneNumber()!=0) + { + theGSM3ShieldV1ModemCore.print(theGSM3ShieldV1ModemCore.getPhoneNumber()); + } + else + { + remoteIP.printTo(theGSM3ShieldV1ModemCore); + } + theGSM3ShieldV1ModemCore.print('"'); + theGSM3ShieldV1ModemCore.print(','); + theGSM3ShieldV1ModemCore.print(theGSM3ShieldV1ModemCore.getPort()); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + + case 3: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Response received + if(resp) + { + // OK Received + // Great. Go for the next step + theGSM3ShieldV1ModemCore.setCommandCounter(4); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + case 4: + char auxLocate [12]; + prepareAuxLocate(PSTR("CONNECT\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp,auxLocate)) + { + // Response received + if(resp) + { + // Received CONNECT OK + // Great. We're done + theGSM3ShieldV1ModemCore.setStatus(TRANSPARENT_CONNECTED); + theGSM3ShieldV1ModemCore.theBuffer().chopUntil(auxLocate, true); + theGSM3ShieldV1ModemCore.closeCommand(1); + } + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + + } +} + +//Disconnect TCP main function. +int GSM3ShieldV1ClientProvider::disconnectTCP(bool client1Server0, int id_socket) +{ + // id Socket does not really mean anything, in this case we have + // only one socket running + theGSM3ShieldV1ModemCore.openCommand(this,DISCONNECTTCP); + + // If we are not closed, launch the command +//[ZZ] if(theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED) +// { + delay(1000); + theGSM3ShieldV1ModemCore.print("+++"); + delay(1000); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QICLOSE")); + theGSM3ShieldV1ModemCore.setStatus(GPRS_READY); +// } + // Looks like it runs everytime, so we simply flush to death and go on + do + { + // Empty the local buffer, and tell the modem to XON + // If meanwhile we receive a DISCONNECT we should detect it as URC. + theGSM3ShieldV1ModemCore.theBuffer().flush(); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + // Give some time for the buffer to refill + delay(100); + theGSM3ShieldV1ModemCore.closeCommand(1); + }while(theGSM3ShieldV1ModemCore.theBuffer().storedBytes()>0); + + theGSM3ShieldV1ModemCore.unRegisterUMProvider(this); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + + +//Write socket first chain main function. +void GSM3ShieldV1ClientProvider::beginWriteSocket(bool client1Server0, int id_socket) +{ +} + + +//Write socket next chain function. +void GSM3ShieldV1ClientProvider::writeSocket(const char* buf) +{ + if(theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED) + theGSM3ShieldV1ModemCore.print(buf); +} + +//Write socket character function. +void GSM3ShieldV1ClientProvider::writeSocket(uint8_t c) +{ + if(theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED) + theGSM3ShieldV1ModemCore.print((char)c); +} + +//Write socket last chain main function. +void GSM3ShieldV1ClientProvider::endWriteSocket() +{ +} + + +//Available socket main function. +int GSM3ShieldV1ClientProvider::availableSocket(bool client1Server0, int id_socket) +{ + + if(!(theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED)) + theGSM3ShieldV1ModemCore.closeCommand(4); + + if(theGSM3ShieldV1ModemCore.theBuffer().storedBytes()) + theGSM3ShieldV1ModemCore.closeCommand(1); + else + theGSM3ShieldV1ModemCore.closeCommand(4); + + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +int GSM3ShieldV1ClientProvider::readSocket() +{ + char charSocket; + + if(theGSM3ShieldV1ModemCore.theBuffer().availableBytes()==0) + { + return 0; + } + + charSocket = theGSM3ShieldV1ModemCore.theBuffer().read(); + + if(theGSM3ShieldV1ModemCore.theBuffer().availableBytes()==100) + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + + return charSocket; + +} + +//Read socket main function. +int GSM3ShieldV1ClientProvider::peekSocket() +{ + return theGSM3ShieldV1ModemCore.theBuffer().peek(0); +} + + +//Flush SMS main function. +void GSM3ShieldV1ClientProvider::flushSocket() +{ + theGSM3ShieldV1ModemCore.openCommand(this,FLUSHSOCKET); + + flushSocketContinue(); +} + +//Send SMS continue function. +void GSM3ShieldV1ClientProvider::flushSocketContinue() +{ + // If we have incomed data + if(theGSM3ShieldV1ModemCore.theBuffer().storedBytes()>0) + { + // Empty the local buffer, and tell the modem to XON + // If meanwhile we receive a DISCONNECT we should detect it as URC. + theGSM3ShieldV1ModemCore.theBuffer().flush(); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + } + else + { + //We're done + theGSM3ShieldV1ModemCore.closeCommand(1); + } +} + +// URC recognize. +// Yes, we recognize "closes" in client mode +bool GSM3ShieldV1ClientProvider::recognizeUnsolicitedEvent(byte oldTail) +{ + char auxLocate [12]; + prepareAuxLocate(PSTR("CLOSED"), auxLocate); + + if((theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED) & theGSM3ShieldV1ModemCore.theBuffer().chopUntil(auxLocate, false, false)) + { + theGSM3ShieldV1ModemCore.setStatus(GPRS_READY); + theGSM3ShieldV1ModemCore.unRegisterUMProvider(this); + return true; + } + + return false; +} + +int GSM3ShieldV1ClientProvider::getSocket(int socket) +{ + return 0; +} + +void GSM3ShieldV1ClientProvider::releaseSocket(int socket) +{ + +} + +bool GSM3ShieldV1ClientProvider::getStatusSocketClient(uint8_t socket) +{ + return (theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED); + +}; + + + diff --git a/libraries/GSM/GSM3ShieldV1ClientProvider.h b/libraries/GSM/GSM3ShieldV1ClientProvider.h new file mode 100644 index 0000000..fa2f8b5 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ClientProvider.h @@ -0,0 +1,181 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_SHIELDV1CLIENTPROVIDER__ +#define __GSM3_SHIELDV1CLIENTPROVIDER__ + +#include <GSM3MobileClientProvider.h> +#include <GSM3ShieldV1BaseProvider.h> + +class GSM3ShieldV1ClientProvider : public GSM3MobileClientProvider, public GSM3ShieldV1BaseProvider +{ + private: + + int remotePort; //Current operation remote port. + IPAddress remoteIP; // Remote IP address + int idSocket; // Remote ID socket. + + + /** Continue to connect TCP client function + */ + void connectTCPClientContinue(); + + /** Continue to available socket function + */ + void availableSocketContinue(); + + /** Continue to flush socket function + */ + void flushSocketContinue(); + + public: + + /** Constructor */ + GSM3ShieldV1ClientProvider(); + + /** minSocket + @return 0 + */ + int minSocket(){return 0;}; + + /** maxSocket + @return 0 + */ + int maxSocket(){return 0;}; + + /** Connect to a remote TCP server + @param server String with IP or server name + @param port Remote port number + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + int connectTCPClient(const char* server, int port, int id_socket); + + /** Connect to a remote TCP server + @param add Remote IP address + @param port Remote port number + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + int connectTCPClient(IPAddress add, int port, int id_socket); + + /** Begin writing through a socket + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + void beginWriteSocket(bool client1Server0, int id_socket); + + /** Write through a socket. MUST go after beginWriteSocket() + @param buf characters to be written (final 0 will not be written) + */ + void writeSocket(const char* buf); + + /** Write through a socket. MUST go after beginWriteSocket() + @param c character to be written + */ + void writeSocket(uint8_t c); + + /** Finish current writing + */ + void endWriteSocket(); + + /** Check if there are data to be read in socket. + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Local socket number + @return 0 if command running, 1 if there are data available, 4 if no data, otherwise error + */ + int availableSocket(bool client, int id_socket); // With "available" and "readSocket" ask the modem for 1500 bytes. + + /** Read data (get a character) available in socket + @return character + */ + int readSocket(); //If Read() gets to the end of the QIRD response, execute again QIRD SYNCHRONOUSLY + + /** Flush socket + */ + void flushSocket(); + + /** Get a character but will not advance the buffer head + @return character + */ + int peekSocket(); + + /** Close a socket + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Socket + @return 0 if command running, 1 if success, otherwise error + */ + int disconnectTCP(bool client1Server0, int id_socket); + + /** Recognize unsolicited event + @param oldTail + @return true if successful + */ + bool recognizeUnsolicitedEvent(byte from); + + /** Manages modem response + @param from Initial byte position + @param to Final byte position + */ + void manageResponse(byte from, byte to); + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + // Client socket management, just to be compatible + // with the Multi option + + /** Get socket + @param socket Socket + @return socket + */ + int getSocket(int socket=-1); + + /** Release socket + @param socket Socket + */ + void releaseSocket(int socket); + + /** Get socket client status + @param socket Socket + @return 1 if connected, 0 otherwise + */ + bool getStatusSocketClient(uint8_t socket); + +}; + + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1DataNetworkProvider.cpp b/libraries/GSM/GSM3ShieldV1DataNetworkProvider.cpp new file mode 100644 index 0000000..aaffdba --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1DataNetworkProvider.cpp @@ -0,0 +1,363 @@ +#include <GSM3ShieldV1DataNetworkProvider.h> +#include <Arduino.h> + +char _command_CGATT[] PROGMEM = "AT+CGATT="; +char _command_SEPARATOR[] PROGMEM = "\",\""; + +//Attach GPRS main function. +GSM3_NetworkStatus_t GSM3ShieldV1DataNetworkProvider::attachGPRS(char* apn, char* user_name, char* password, bool synchronous) +{ + user = user_name; + passwd = password; + // A sad use of byte reuse + theGSM3ShieldV1ModemCore.setPhoneNumber(apn); + + theGSM3ShieldV1ModemCore.openCommand(this,ATTACHGPRS); + theGSM3ShieldV1ModemCore.setStatus(CONNECTING); + + attachGPRSContinue(); + + // If synchronous, wait till attach is over, or not. + if(synchronous) + { + // if we shorten this delay, the command fails + while(ready()==0) + delay(100); + } + + return theGSM3ShieldV1ModemCore.getStatus(); +} + +//Atthach GPRS continue function. +void GSM3ShieldV1DataNetworkProvider::attachGPRSContinue() +{ + bool resp; + // 1: Attach to GPRS service "AT+CGATT=1" + // 2: Wait attach OK and Set the context 0 as FGCNT "AT+QIFGCNT=0" + // 3: Wait context OK and Set bearer type as GPRS, APN, user name and pasword "AT+QICSGP=1..." + // 4: Wait bearer OK and Enable the function of MUXIP "AT+QIMUX=1" + // 5: Wait for disable MUXIP OK and Set the session mode as non transparent "AT+QIMODE=0" + // 6: Wait for session mode OK and Enable notification when data received "AT+QINDI=1" + // 8: Wait domain name OK and Register the TCP/IP stack "AT+QIREGAPP" + // 9: Wait for Register OK and Activate FGCNT "AT+QIACT" + // 10: Wait for activate OK + + int ct=theGSM3ShieldV1ModemCore.getCommandCounter(); + if(ct==1) + { + //AT+CGATT + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_CGATT,false); + theGSM3ShieldV1ModemCore.print(1); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + } + else if(ct==2) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + //AT+QIFGCNT + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIFGCNT=0")); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==3) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + // Great. Go for the next step + //DEBUG + //Serial.println("AT+QICSGP."); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QICSGP=1,\""),false); + theGSM3ShieldV1ModemCore.print(theGSM3ShieldV1ModemCore.getPhoneNumber()); + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_SEPARATOR,false); + theGSM3ShieldV1ModemCore.print(user); + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_SEPARATOR,false); + theGSM3ShieldV1ModemCore.print(passwd); + theGSM3ShieldV1ModemCore.print("\"\r"); + theGSM3ShieldV1ModemCore.setCommandCounter(4); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==4) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + // AT+QIMUX=1 for multisocket + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIMUX=0")); + theGSM3ShieldV1ModemCore.setCommandCounter(5); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==5) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + //AT+QIMODE=0 for multisocket + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIMODE=1")); + theGSM3ShieldV1ModemCore.setCommandCounter(6); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==6) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + // AT+QINDI=1 + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QINDI=1")); + theGSM3ShieldV1ModemCore.setCommandCounter(8); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==8) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + // AT+QIREGAPP + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIREGAPP")); + theGSM3ShieldV1ModemCore.setCommandCounter(9); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==9) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if(resp) + { + // AT+QIACT + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIACT")); + theGSM3ShieldV1ModemCore.setCommandCounter(10); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + else if(ct==10) + { + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if (resp) + { + theGSM3ShieldV1ModemCore.setStatus(GPRS_READY); + theGSM3ShieldV1ModemCore.closeCommand(1); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + } +} + +//Detach GPRS main function. +GSM3_NetworkStatus_t GSM3ShieldV1DataNetworkProvider::detachGPRS(bool synchronous) +{ + theGSM3ShieldV1ModemCore.openCommand(this,DETACHGPRS); + theGSM3ShieldV1ModemCore.setStatus(CONNECTING); + detachGPRSContinue(); + + if(synchronous) + { + while(ready()==0) + delay(1); + } + + return theGSM3ShieldV1ModemCore.getStatus(); +} + +void GSM3ShieldV1DataNetworkProvider::detachGPRSContinue() +{ + bool resp; + // 1: Detach to GPRS service "AT+CGATT=0" + // 2: Wait dettach +PDP DEACT + // 3: Wait for OK + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //AT+CGATT=0 + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_CGATT,false); + theGSM3ShieldV1ModemCore.print(0); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + char auxLocate[12]; + prepareAuxLocate(PSTR("+PDP DEACT"), auxLocate); + if(theGSM3ShieldV1ModemCore.theBuffer().locate(auxLocate)) + { + if(resp) + { + // Received +PDP DEACT; + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + case 3: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // OK received + if (resp) + { + theGSM3ShieldV1ModemCore.setStatus(GSM_READY); + theGSM3ShieldV1ModemCore.closeCommand(1); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//QILOCIP parse. +bool GSM3ShieldV1DataNetworkProvider::parseQILOCIP_rsp(char* LocalIP, int LocalIPlength, bool& rsp) +{ + if (!(theGSM3ShieldV1ModemCore.theBuffer().extractSubstring("\r\n","\r\n", LocalIP, LocalIPlength))) + rsp = false; + else + rsp = true; + return true; +} + +//Get IP main function. +int GSM3ShieldV1DataNetworkProvider::getIP(char* LocalIP, int LocalIPlength) +{ + theGSM3ShieldV1ModemCore.setPhoneNumber(LocalIP); + theGSM3ShieldV1ModemCore.setPort(LocalIPlength); + theGSM3ShieldV1ModemCore.openCommand(this,GETIP); + getIPContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +void GSM3ShieldV1DataNetworkProvider::getIPContinue() +{ + + bool resp; + // 1: Read Local IP "AT+QILOCIP" + // 2: Waiting for IP. + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //AT+QILOCIP + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QILOCIP")); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(parseQILOCIP_rsp(theGSM3ShieldV1ModemCore.getPhoneNumber(), theGSM3ShieldV1ModemCore.getPort(), resp)) + { + if (resp) + theGSM3ShieldV1ModemCore.closeCommand(1); + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + theGSM3ShieldV1ModemCore.theBuffer().flush(); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + break; + } +} + +//Get IP with IPAddress object +IPAddress GSM3ShieldV1DataNetworkProvider::getIPAddress() { + char ip_temp[15]=""; + getIP(ip_temp, 15); + unsigned long m=millis(); + + while((millis()-m)<10*1000 && (!ready())){ + // wait for a response from the modem: + delay(100); + } + IPAddress ip; + inet_aton(ip_temp, ip); + return ip; +} + +int GSM3ShieldV1DataNetworkProvider::inet_aton(const char* aIPAddrString, IPAddress& aResult) +{ + // See if we've been given a valid IP address + const char* p =aIPAddrString; + while (*p && + ( (*p == '.') || (*p >= '0') || (*p <= '9') )) + { + p++; + } + + if (*p == '\0') + { + // It's looking promising, we haven't found any invalid characters + p = aIPAddrString; + int segment =0; + int segmentValue =0; + while (*p && (segment < 4)) + { + if (*p == '.') + { + // We've reached the end of a segment + if (segmentValue > 255) + { + // You can't have IP address segments that don't fit in a byte + return 0; + } + else + { + aResult[segment] = (byte)segmentValue; + segment++; + segmentValue = 0; + } + } + else + { + // Next digit + segmentValue = (segmentValue*10)+(*p - '0'); + } + p++; + } + // We've reached the end of address, but there'll still be the last + // segment to deal with + if ((segmentValue > 255) || (segment > 3)) + { + // You can't have IP address segments that don't fit in a byte, + // or more than four segments + return 0; + } + else + { + aResult[segment] = (byte)segmentValue; + return 1; + } + } + else + { + return 0; + } +} + +//Response management. +void GSM3ShieldV1DataNetworkProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case ATTACHGPRS: + attachGPRSContinue(); + break; + case DETACHGPRS: + detachGPRSContinue(); + break; + case GETIP: + getIPContinue(); + break; + } +} diff --git a/libraries/GSM/GSM3ShieldV1DataNetworkProvider.h b/libraries/GSM/GSM3ShieldV1DataNetworkProvider.h new file mode 100644 index 0000000..012a0ca --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1DataNetworkProvider.h @@ -0,0 +1,140 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3SHIELDV1DATANETWORKPROVIDER_ +#define _GSM3SHIELDV1DATANETWORKPROVIDER_ + +#include <GSM3MobileDataNetworkProvider.h> +#include <GSM3ShieldV1BaseProvider.h> +#include <GSM3ShieldV1ModemCore.h> +#include <IPAddress.h> + +class GSM3ShieldV1DataNetworkProvider : public GSM3MobileDataNetworkProvider, public GSM3ShieldV1BaseProvider +{ + private: + + char* user; // Username for GPRS + char* passwd; // Password for GPRS + + /** Continue to attach GPRS function + */ + void attachGPRSContinue(); + + /** Continue to detach GPRS function + */ + void detachGPRSContinue(); + + /** Parse QILOCIP response + @param LocalIP Buffer for save local IP address + @param LocalIPlength Buffer size + @param rsp Returns true if expected response exists + @return true if command executed correctly + */ + bool parseQILOCIP_rsp(char* LocalIP, int LocalIPlength, bool& rsp); + + /** Continue to get IP function + */ + void getIPContinue(); + + /** Implementation of inet_aton standard function + @param aIPAddrString IP address in characters buffer + @param aResult IP address in IPAddress format + @return 1 if the address is successfully converted, or 0 if the conversion failed + */ + int inet_aton(const char* aIPAddrString, IPAddress& aResult); + + public: + + /** Attach to GPRS/GSM network + @param networkId APN GPRS + @param user Username + @param pass Password + @return connection status + */ + GSM3_NetworkStatus_t networkAttach(char* networkId, char* user, char* pass) + { + return attachGPRS(networkId, user, pass); + }; + + /** Detach GPRS/GSM network + @return connection status + */ + GSM3_NetworkStatus_t networkDetach(){ return detachGPRS();}; + + /** Attach to GPRS service + @param apn APN GPRS + @param user_name Username + @param password Password + @param synchronous Sync mode + @return connection status + */ + GSM3_NetworkStatus_t attachGPRS(char* apn, char* user_name, char* password, bool synchronous=true); + + /** Detach GPRS service + @param synchronous Sync mode + @return connection status + */ + GSM3_NetworkStatus_t detachGPRS(bool synchronous=true); + + /** Returns 0 if last command is still executing + @return 1 if success, >1 if error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + /** Get network status (connection) + @return status + */ + inline GSM3_NetworkStatus_t getStatus(){return theGSM3ShieldV1ModemCore.getStatus();}; + + /** Get actual assigned IP address + @param LocalIP Buffer for copy IP address + @param LocalIPlength Buffer length + @return command error if exists + */ + int getIP(char* LocalIP, int LocalIPlength); + + /** Get actual assigned IP address in IPAddress format + @return IP address in IPAddress format + */ + IPAddress getIPAddress(); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to); + + +}; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1DirectModemProvider.cpp b/libraries/GSM/GSM3ShieldV1DirectModemProvider.cpp new file mode 100644 index 0000000..47aa52b --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1DirectModemProvider.cpp @@ -0,0 +1,143 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#include <GSM3ShieldV1DirectModemProvider.h> +#include <GSM3ShieldV1ModemCore.h> +#include <HardwareSerial.h> +#include <Arduino.h> + +#define __RESETPIN__ 7 + +//Constructor +GSM3ShieldV1DirectModemProvider::GSM3ShieldV1DirectModemProvider(bool t) +{ + trace=t; +}; + +void GSM3ShieldV1DirectModemProvider::begin() +{ + theGSM3ShieldV1ModemCore.gss.begin(9600); +} + +void GSM3ShieldV1DirectModemProvider::restartModem() +{ + pinMode(__RESETPIN__, OUTPUT); + digitalWrite(__RESETPIN__, HIGH); + delay(12000); + digitalWrite(__RESETPIN__, LOW); + delay(1000); + +} + +//To enable the debug process +void GSM3ShieldV1DirectModemProvider::connect() +{ + theGSM3ShieldV1ModemCore.registerActiveProvider(this); +} + +//To disable the debug process +void GSM3ShieldV1DirectModemProvider::disconnect() +{ + theGSM3ShieldV1ModemCore.registerActiveProvider(0); +} + +//Write to the modem by means of SoftSerial +size_t GSM3ShieldV1DirectModemProvider::write(uint8_t c) +{ + theGSM3ShieldV1ModemCore.write(c); +} + +//Detect if data to be read +int/*bool*/ GSM3ShieldV1DirectModemProvider::available() +{ + if (theGSM3ShieldV1ModemCore.gss.cb.peek(1)) return 1; + else return 0; +} + +//Read data +int/*char*/ GSM3ShieldV1DirectModemProvider::read() +{ + int dataRead; + dataRead = theGSM3ShieldV1ModemCore.gss.cb.read(); + //In case last char in xof mode. + if (!(theGSM3ShieldV1ModemCore.gss.cb.peek(0))) { + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + delay(100); + } + return dataRead; +} + +//Peek data +int/*char*/ GSM3ShieldV1DirectModemProvider::peek() +{ + return theGSM3ShieldV1ModemCore.gss.cb.peek(0); +} + +//Flush data +void GSM3ShieldV1DirectModemProvider::flush() +{ + return theGSM3ShieldV1ModemCore.gss.cb.flush(); +} + +String GSM3ShieldV1DirectModemProvider::writeModemCommand(String ATcommand, int responseDelay) +{ + + if(trace) + Serial.println(ATcommand); + + // Flush other texts + flush(); + + //Enter debug mode. + connect(); + //Send the AT command. + println(ATcommand); + + delay(responseDelay); + + //Get response data from modem. + String result = ""; + if(trace) + theGSM3ShieldV1ModemCore.gss.cb.debugBuffer(); + + while (available()) + { + char c = read(); + result += c; + } + if(trace) + Serial.println(result); + //Leave the debug mode. + disconnect(); + return result; +}
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1DirectModemProvider.h b/libraries/GSM/GSM3ShieldV1DirectModemProvider.h new file mode 100644 index 0000000..2d20412 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1DirectModemProvider.h @@ -0,0 +1,118 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ + +#ifndef __GSM3DIRECTMODEMPROVIDER__ +#define __GSM3DIRECTMODEMPROVIDER__ + +#include <GSM3SoftSerial.h> +#include <GSM3MobileNetworkProvider.h> +#include <GSM3ShieldV1BaseProvider.h> +#include <Stream.h> +#include <Arduino.h> + +class GSM3ShieldV1DirectModemProvider : public GSM3ShieldV1BaseProvider, public Stream +{ + private: + + bool trace; + + public: + + /** Constructor + @param trace if true, dumps all AT dialogue to Serial + */ + GSM3ShieldV1DirectModemProvider(bool trace=false); + + /** + */ + void begin(); + + /** + */ + void restartModem(); + + /** Enable the debug process. + */ + void connect(); + + /** Disable the debug process. + */ + void disconnect(); + + /** Debug write to modem by means of SoftSerial. + @param c Character + @return size + */ + size_t write(uint8_t c); + + /** Check for incoming bytes in buffer + @return + */ + int available(); + + /** Read from circular buffer + @return character + */ + int read(); + + /** Read from circular buffer, but do not delete it + @return character + */ + int peek(); + + /** Empty circular buffer + */ + void flush(); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to){}; + + /** Recognize unsolicited event + @param from + @return true if successful + */ + bool recognizeUnsolicitedEvent(byte from){return false;}; + + /** Send AT command to modem + @param command AT command + @param delay Time to wait for response + @return response from modem + */ + String writeModemCommand(String command, int delay); +}; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1ModemCore.cpp b/libraries/GSM/GSM3ShieldV1ModemCore.cpp new file mode 100644 index 0000000..c90ff4d --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ModemCore.cpp @@ -0,0 +1,198 @@ +#include <GSM3ShieldV1ModemCore.h> +#include <Arduino.h> + +GSM3ShieldV1ModemCore theGSM3ShieldV1ModemCore; + +char* __ok__="OK"; + +GSM3ShieldV1ModemCore::GSM3ShieldV1ModemCore() : gss() +{ + gss.registerMgr(this); + _dataInBufferFrom=0; + _dataInBufferTo=0; + commandError=1; + commandCounter=0; + ongoingCommand=NONE; + takeMilliseconds(); + + for(int i=0;i<UMPROVIDERS;i++) + UMProvider[i]=0; +} + +void GSM3ShieldV1ModemCore::registerUMProvider(GSM3ShieldV1BaseProvider* provider) +{ + for(int i=0;i<UMPROVIDERS;i++) + { + if(UMProvider[i]==0) + { + UMProvider[i]=provider; + break; + } + + } + +} + +void GSM3ShieldV1ModemCore::unRegisterUMProvider(GSM3ShieldV1BaseProvider* provider) +{ + for(int i=0;i<UMPROVIDERS;i++) + { + if(UMProvider[i]==provider) + { + UMProvider[i]=0; + break; + } + } +} + + +//Response parse. +bool GSM3ShieldV1ModemCore::genericParse_rsp(bool& rsp, char* string, char* string2) +{ + if((string==0) && (string2==0)) + string=__ok__; + + rsp=theBuffer().locate(string); + + if((!rsp)&&(string2!=0)) + rsp=theBuffer().locate(string2); + + return true; +} + +void GSM3ShieldV1ModemCore::closeCommand(int code) +{ + // If we were configuring the modem, + // and there's been an error + // we don't know exactly where we are + if((code!=1)&&(theGSM3ShieldV1ModemCore.getOngoingCommand()==MODEMCONFIG)) + theGSM3ShieldV1ModemCore.setStatus(ERROR); + + setCommandError(code); + ongoingCommand=NONE; + activeProvider=0; + commandCounter=1; +} + +//Generic command (stored in flash). +void GSM3ShieldV1ModemCore::genericCommand_rq(PROGMEM prog_char str[], bool addCR) +{ + theBuffer().flush(); + writePGM(str, addCR); +} + +//Generic command (const string). +void GSM3ShieldV1ModemCore::genericCommand_rqc(const char* str, bool addCR) +{ + theBuffer().flush(); + print(str); + if(addCR) + print("\r"); +} + +// If we are not debugging, lets manage data in interrupt time +// but if we are not, just take note. +void GSM3ShieldV1ModemCore::manageMsg(byte from, byte to) +{ + if(_debug) + { + _dataInBufferFrom=from; + _dataInBufferTo=to; + } + else + { + manageMsgNow(from, to); + } +} + +void GSM3ShieldV1ModemCore::manageReceivedData() +{ + if(_debug) + { +/* Serial.print(theBuffer().getHead()); + Serial.print(" "); + Serial.println(theBuffer().getTail());*/ + if(_dataInBufferFrom != _dataInBufferTo) + { + theBuffer().debugBuffer(); + manageMsgNow(_dataInBufferFrom, _dataInBufferTo); + _dataInBufferFrom=0; + _dataInBufferTo=0; + } + } + else + { + // Just debugging the non debugging +// Serial.println(); +// Serial.print("Com:"); +// Serial.print(ongoingCommand); +// Serial.print(" Step:"); +// Serial.print(commandCounter); + } +} + +//Select between URC or response. +void GSM3ShieldV1ModemCore::manageMsgNow(byte from, byte to) +{ + bool recognized=false; + + for(int i=0;(i<UMPROVIDERS)&&(!recognized);i++) + { + if(UMProvider[i]) + recognized=UMProvider[i]->recognizeUnsolicitedEvent(from); + } + if((!recognized)&&(activeProvider)) + activeProvider->manageResponse(from, to); +} + + +void GSM3ShieldV1ModemCore::openCommand(GSM3ShieldV1BaseProvider* provider, GSM3_commandType_e c) +{ + activeProvider=provider; + commandError=0; + commandCounter=1; + ongoingCommand=c; + _dataInBufferFrom=0; + _dataInBufferTo=0; + +}; + +size_t GSM3ShieldV1ModemCore::writePGM(PROGMEM prog_char str[], bool CR) +{ + int i=0; + char c; + + do + { + c=pgm_read_byte_near(str + i); + if(c!=0) + write(c); + i++; + } while (c!=0); + if(CR) + print("\r"); + + return 1; +} + +size_t GSM3ShieldV1ModemCore::write(uint8_t c) +{ + if(_debug) + GSM3CircularBuffer::printCharDebug(c); + return gss.write(c); +} + +unsigned long GSM3ShieldV1ModemCore::takeMilliseconds() +{ + unsigned long now=millis(); + unsigned long delta; + delta=now-milliseconds; + milliseconds=now; + return delta; +} + +void GSM3ShieldV1ModemCore::delayInsideInterrupt(unsigned long milliseconds) +{ + for (unsigned long k=0;k<milliseconds;k++) + theGSM3ShieldV1ModemCore.gss.tunedDelay(1000); +} diff --git a/libraries/GSM/GSM3ShieldV1ModemCore.h b/libraries/GSM/GSM3ShieldV1ModemCore.h new file mode 100644 index 0000000..f9efce7 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ModemCore.h @@ -0,0 +1,260 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ + +#ifndef __GSM3_SHIELDV1MODEMCORE__ +#define __GSM3_SHIELDV1MODEMCORE__ + +#include <GSM3SoftSerial.h> +#include <GSM3ShieldV1BaseProvider.h> +#include <GSM3MobileAccessProvider.h> +#include <Print.h> + +#define UMPROVIDERS 3 + +class GSM3ShieldV1ModemCore : public GSM3SoftSerialMgr, public Print +{ + private: + + // Phone number, used when calling, sending SMS and reading calling numbers + // Also PIN in modem configuration + // Also APN + // Also remote server + char* phoneNumber; + + // Working port. Port used in the ongoing command, while opening a server + // Also for IP address length + int port; + + // 0 = ongoing + // 1 = OK + // 2 = Error. Incorrect state + // 3 = Unexpected modem message + // 4 = OK but not available data. + uint8_t commandError; + + // Counts the steps by the command + uint8_t commandCounter; + + // Presently ongoing command + GSM3_commandType_e ongoingCommand; + + // Enable/disable debug + bool _debug; + byte _dataInBufferFrom; + byte _dataInBufferTo; + + // This is the modem (known) status + GSM3_NetworkStatus_t _status; + + GSM3ShieldV1BaseProvider* UMProvider[UMPROVIDERS]; + GSM3ShieldV1BaseProvider* activeProvider; + + // Private function for anage message + void manageMsgNow(byte from, byte to); + + unsigned long milliseconds; + + public: + + /** Constructor */ + GSM3ShieldV1ModemCore(); + + GSM3SoftSerial gss; // Direct access to modem + + /** Get phone number + @return phone number + */ + char *getPhoneNumber(){return phoneNumber;}; + + /** Establish a new phone number + @param n Phone number + */ + void setPhoneNumber(char *n){phoneNumber=n;}; + + /** Get port used + @return port + */ + int getPort(){return port;}; + + /** Establish a new port for use + @param p Port + */ + void setPort(int p){port=p;}; + + /** Get command error + @return command error + */ + uint8_t getCommandError(){return commandError;}; + + /** Establish a command error + @param n Command error + */ + void setCommandError(uint8_t n){commandError=n;}; + + /** Get command counter + @return command counter + */ + uint8_t getCommandCounter(){return commandCounter;}; + + /** Set command counter + @param c Initial value + */ + void setCommandCounter(uint8_t c){commandCounter=c;}; + + /** Get ongoing command + @return command + */ + GSM3_commandType_e getOngoingCommand(){return ongoingCommand;}; + + /** Set ongoing command + @param c New ongoing command + */ + void setOngoingCommand(GSM3_commandType_e c){ongoingCommand=c;}; + + /** Open command + @param activeProvider Active provider + @param c Command for open + */ + void openCommand(GSM3ShieldV1BaseProvider* activeProvider, GSM3_commandType_e c); + + /** Close command + @param code Close code + */ + void closeCommand(int code); + + // These functions allow writing to the SoftwareSerial + // If debug is set, dump to the console + + /** Write a character in serial + @param c Character + @return size + */ + size_t write(uint8_t c); + + /** Write PGM + @param str Buffer for write + @param CR Carriadge return adding automatically + @return size + */ + virtual size_t writePGM(PROGMEM prog_char str[], bool CR=true); + + /** Establish debug mode + @param db Boolean that indicates debug on or off + */ + void setDebug(bool db){_debug=db;}; + + /** Generic response parser + @param rsp Returns true if expected response exists + @param string Substring expected in response + @param string2 Second substring expected in response + @return true if parsed correctly + */ + bool genericParse_rsp(bool& rsp, char* string=0, char* string2=0); + + /** Generates a generic AT command request from PROGMEM prog_char buffer + @param str Buffer with AT command + @param addCR Carriadge return adding automatically + */ + void genericCommand_rq(PROGMEM prog_char str[], bool addCR=true); + + /** Generates a generic AT command request from a simple char buffer + @param str Buffer with AT command + @param addCR Carriadge return adding automatically + */ + void genericCommand_rqc(const char* str, bool addCR=true); + + /** Generates a generic AT command request from characters buffer + @param str Buffer with AT command + @param addCR Carriadge return adding automatically + */ + void genericCommand_rq(const char* str, bool addCR=true); + + /** Returns the circular buffer + @return circular buffer + */ + inline GSM3CircularBuffer& theBuffer(){return gss.cb;}; + + /** Establish a new network status + @param status Network status + */ + inline void setStatus(GSM3_NetworkStatus_t status) { _status = status; }; + + /** Returns actual network status + @return network status + */ + inline GSM3_NetworkStatus_t getStatus() { return _status; }; + + /** Register provider as willing to receive unsolicited messages + @param provider Pointer to provider able to receive unsolicited messages + */ + void registerUMProvider(GSM3ShieldV1BaseProvider* provider); + + /** unegister provider as willing to receive unsolicited messages + @param provider Pointer to provider able to receive unsolicited messages + */ + void unRegisterUMProvider(GSM3ShieldV1BaseProvider* provider); + + + /** Register a provider as "dialoguing" talking in facto with the modem + @param provider Pointer to provider receiving responses + */ + void registerActiveProvider(GSM3ShieldV1BaseProvider* provider){activeProvider=provider;}; + + /** Needed to manage the SoftSerial. Receives the call when received data + If _debugging, no code is called + @param from Starting byte to read + @param to Last byte to read + */ + void manageMsg(byte from, byte to); + + /** If _debugging, this call is assumed to be made out of interrupts + Prints incoming info and calls manageMsgNow + */ + void manageReceivedData(); + + /** Chronometer. Measure milliseconds from last call + @return milliseconds from las time function was called + */ + unsigned long takeMilliseconds(); + + /** Delay for interrupts + @param milliseconds Delay time in milliseconds + */ + void delayInsideInterrupt(unsigned long milliseconds); + +}; + +extern GSM3ShieldV1ModemCore theGSM3ShieldV1ModemCore; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1ModemVerification.cpp b/libraries/GSM/GSM3ShieldV1ModemVerification.cpp new file mode 100644 index 0000000..e5d190f --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ModemVerification.cpp @@ -0,0 +1,79 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ + +#include <GSM3ShieldV1ModemVerification.h> + +// constructor +GSM3ShieldV1ModemVerification::GSM3ShieldV1ModemVerification() +{ +}; + +// reset the modem for direct access +int GSM3ShieldV1ModemVerification::begin() +{ + int result=0; + String modemResponse; + + // check modem response + modemAccess.begin(); + + // reset hardware + modemAccess.restartModem(); + + modemResponse=modemAccess.writeModemCommand("AT", 1000); + if(modemResponse.indexOf("OK")>=0) + result=1; + modemResponse=modemAccess.writeModemCommand("ATE0", 1000); + return result; +} + +// get IMEI +String GSM3ShieldV1ModemVerification::getIMEI() +{ + String number; + // AT command for obtain IMEI + String modemResponse = modemAccess.writeModemCommand("AT+GSN", 2000); + // Parse and check response + char res_to_compare[modemResponse.length()]; + modemResponse.toCharArray(res_to_compare, modemResponse.length()); + if(strstr(res_to_compare,"OK") == NULL) + { + return NULL; + } + else + { + number = modemResponse.substring(1, 17); + return number; + } +} diff --git a/libraries/GSM/GSM3ShieldV1ModemVerification.h b/libraries/GSM/GSM3ShieldV1ModemVerification.h new file mode 100644 index 0000000..e03980e --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ModemVerification.h @@ -0,0 +1,64 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3SHIELDV1MODEMVERIFICATION_ +#define _GSM3SHIELDV1MODEMVERIFICATION_ + +#include <GSM3ShieldV1AccessProvider.h> +#include <GSM3ShieldV1DirectModemProvider.h> + +class GSM3ShieldV1ModemVerification +{ + + private: + + GSM3ShieldV1DirectModemProvider modemAccess; + GSM3ShieldV1AccessProvider gsm; // Access provider to GSM/GPRS network + + public: + + /** Constructor */ + GSM3ShieldV1ModemVerification(); + + /** Check modem response and restart it + */ + int begin(); + + /** Obtain modem IMEI (command AT) + @return modem IMEI number + */ + String getIMEI(); + +}; + +#endif;
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1MultiClientProvider.cpp b/libraries/GSM/GSM3ShieldV1MultiClientProvider.cpp new file mode 100644 index 0000000..797424f --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1MultiClientProvider.cpp @@ -0,0 +1,583 @@ +#include <GSM3ShieldV1MultiClientProvider.h> +#include <GSM3ShieldV1ModemCore.h> + +char _command_MultiQISRVC[] PROGMEM = "AT+QISRVC="; + +#define __TOUTFLUSH__ 10000 + +GSM3ShieldV1MultiClientProvider::GSM3ShieldV1MultiClientProvider() +{ + theGSM3MobileClientProvider=this; + theGSM3ShieldV1ModemCore.registerUMProvider(this); +}; + +//Response management. +void GSM3ShieldV1MultiClientProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case XON: + if (flagReadingSocket) + { +// flagReadingSocket = 0; + fullBufferSocket = (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()<3); + } + else theGSM3ShieldV1ModemCore.setOngoingCommand(NONE); + break; + case NONE: + theGSM3ShieldV1ModemCore.gss.cb.deleteToTheEnd(from); + break; + case CONNECTTCPCLIENT: + connectTCPClientContinue(); + break; + case DISCONNECTTCP: + disconnectTCPContinue(); + break; + case BEGINWRITESOCKET: + beginWriteSocketContinue(); + break; + case ENDWRITESOCKET: + endWriteSocketContinue(); + break; + case AVAILABLESOCKET: + availableSocketContinue(); + break; + case FLUSHSOCKET: + fullBufferSocket = (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()<3); + flushSocketContinue(); + break; + } +} + +//Connect TCP main function. +int GSM3ShieldV1MultiClientProvider::connectTCPClient(const char* server, int port, int id_socket) +{ + theGSM3ShieldV1ModemCore.setPort(port); + idSocket = id_socket; + + theGSM3ShieldV1ModemCore.setPhoneNumber((char*)server); + theGSM3ShieldV1ModemCore.openCommand(this,CONNECTTCPCLIENT); + connectTCPClientContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +int GSM3ShieldV1MultiClientProvider::connectTCPClient(IPAddress add, int port, int id_socket) +{ + remoteIP=add; + theGSM3ShieldV1ModemCore.setPhoneNumber(0); + return connectTCPClient(0, port, id_socket); +} + +//Connect TCP continue function. +void GSM3ShieldV1MultiClientProvider::connectTCPClientContinue() +{ + bool resp; + // 0: Dot or DNS notation activation + // 1: Disable SW flow control + // 2: Waiting for IFC OK + // 3: Start-up TCP connection "AT+QIOPEN" + // 4: Wait for connection OK + // 5: Wait for CONNECT + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIDNSIP="), false); + if ((theGSM3ShieldV1ModemCore.getPhoneNumber()!=0)&& + ((*(theGSM3ShieldV1ModemCore.getPhoneNumber())<'0')||((*(theGSM3ShieldV1ModemCore.getPhoneNumber())>'9')))) + { + theGSM3ShieldV1ModemCore.print('1'); + theGSM3ShieldV1ModemCore.print('\r'); + } + else + { + theGSM3ShieldV1ModemCore.print('0'); + theGSM3ShieldV1ModemCore.print('\r'); + } + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + //Response received + if(resp) + { + // AT+QIOPEN + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIOPEN="),false); + theGSM3ShieldV1ModemCore.print(idSocket); + theGSM3ShieldV1ModemCore.print(",\"TCP\",\""); + if(theGSM3ShieldV1ModemCore.getPhoneNumber()!=0) + { + theGSM3ShieldV1ModemCore.print(theGSM3ShieldV1ModemCore.getPhoneNumber()); + } + else + { + remoteIP.printTo(theGSM3ShieldV1ModemCore); + } + theGSM3ShieldV1ModemCore.print('"'); + theGSM3ShieldV1ModemCore.print(','); + theGSM3ShieldV1ModemCore.print(theGSM3ShieldV1ModemCore.getPort()); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + + case 3: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Response received + if(resp) + { + // OK Received + // Great. Go for the next step + theGSM3ShieldV1ModemCore.setCommandCounter(4); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + case 4: + char auxLocate [12]; + prepareAuxLocate(PSTR("CONNECT OK"), auxLocate); + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp,auxLocate)) + { + // Response received + if(resp) + { + // Received CONNECT OK + // Great. We're done + theGSM3ShieldV1ModemCore.closeCommand(1); + } + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + + } +} + +//Disconnect TCP main function. +int GSM3ShieldV1MultiClientProvider::disconnectTCP(bool client1Server0, int id_socket) +{ + idSocket = id_socket; + + // First of all, we will flush the socket synchronously + unsigned long m; + m=millis(); + flushSocket(); + while(((millis()-m)< __TOUTFLUSH__ )&&(ready()==0)) + delay(10); + + // Could not flush the communications... strange + if(ready()==0) + { + theGSM3ShieldV1ModemCore.setCommandError(2); + return theGSM3ShieldV1ModemCore.getCommandError(); + } + + // Set up the command + client1_server0 = client1Server0; + flagReadingSocket=0; + theGSM3ShieldV1ModemCore.openCommand(this,DISCONNECTTCP); + disconnectTCPContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Disconnect TCP continue function +void GSM3ShieldV1MultiClientProvider::disconnectTCPContinue() +{ + bool resp; + // 1: Send AT+QISRVC + // 2: "AT+QICLOSE" + // 3: Wait for OK + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_MultiQISRVC, false); + if (client1_server0) theGSM3ShieldV1ModemCore.print('1'); + else theGSM3ShieldV1ModemCore.print('2'); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + // Parse response to QISRVC + theGSM3ShieldV1ModemCore.genericParse_rsp(resp); + if(resp) + { + // Send QICLOSE command + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QICLOSE="),false); + theGSM3ShieldV1ModemCore.print(idSocket); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else + theGSM3ShieldV1ModemCore.closeCommand(3); + break; + case 3: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + theGSM3ShieldV1ModemCore.setCommandCounter(0); + if (resp) + theGSM3ShieldV1ModemCore.closeCommand(1); + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Write socket first chain main function. +void GSM3ShieldV1MultiClientProvider::beginWriteSocket(bool client1Server0, int id_socket) +{ + idSocket = id_socket; + client1_server0 = client1Server0; + theGSM3ShieldV1ModemCore.openCommand(this,BEGINWRITESOCKET); + beginWriteSocketContinue(); +} + +//Write socket first chain continue function. +void GSM3ShieldV1MultiClientProvider::beginWriteSocketContinue() +{ + bool resp; + // 1: Send AT+QISRVC + // 2: Send AT+QISEND + // 3: wait for > and Write text + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + // AT+QISRVC + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_MultiQISRVC, false); + if (client1_server0) + theGSM3ShieldV1ModemCore.print('1'); + else + theGSM3ShieldV1ModemCore.print('2'); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Response received + if(resp) + { + // AT+QISEND + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QISEND="), false); + theGSM3ShieldV1ModemCore.print(idSocket); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else + { + theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + break; + case 3: + char aux[2]; + aux[0]='>'; + aux[1]=0; + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp, aux)) + { + if(resp) + { + // Received ">" + theGSM3ShieldV1ModemCore.closeCommand(1); + } + else + { + theGSM3ShieldV1ModemCore.closeCommand(3); + } + } + break; + } +} + +//Write socket next chain function. +void GSM3ShieldV1MultiClientProvider::writeSocket(const char* buf) +{ + theGSM3ShieldV1ModemCore.print(buf); +} + +//Write socket character function. +void GSM3ShieldV1MultiClientProvider::writeSocket(char c) +{ + theGSM3ShieldV1ModemCore.print(c); +} + +//Write socket last chain main function. +void GSM3ShieldV1MultiClientProvider::endWriteSocket() +{ + theGSM3ShieldV1ModemCore.openCommand(this,ENDWRITESOCKET); + endWriteSocketContinue(); +} + +//Write socket last chain continue function. +void GSM3ShieldV1MultiClientProvider::endWriteSocketContinue() +{ + bool resp; + // 1: Write text (ctrl-Z) + // 2: Wait for OK + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.write(26); // Ctrl-Z + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // OK received + if (resp) theGSM3ShieldV1ModemCore.closeCommand(1); + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Available socket main function. +int GSM3ShieldV1MultiClientProvider::availableSocket(bool client1Server0, int id_socket) +{ + if(flagReadingSocket==1) + { + theGSM3ShieldV1ModemCore.setCommandError(1); + return 1; + } + client1_server0 = client1Server0; + idSocket = id_socket; + theGSM3ShieldV1ModemCore.openCommand(this,AVAILABLESOCKET); + availableSocketContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Available socket continue function. +void GSM3ShieldV1MultiClientProvider::availableSocketContinue() +{ + bool resp; + // 1: AT+QIRD + // 2: Wait for OK and Next necessary AT+QIRD + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QIRD=0,"),false); + if (client1_server0) + theGSM3ShieldV1ModemCore.print('1'); + else + theGSM3ShieldV1ModemCore.print('2'); + theGSM3ShieldV1ModemCore.print(','); + theGSM3ShieldV1ModemCore.print(idSocket); + theGSM3ShieldV1ModemCore.print(",1500"); + // theGSM3ShieldV1ModemCore.print(",120"); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(parseQIRD_head(resp)) + { + if (!resp) + { + theGSM3ShieldV1ModemCore.closeCommand(4); + } + else + { + flagReadingSocket=1; + theGSM3ShieldV1ModemCore.closeCommand(1); + } + } + else + { + theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Read Socket Parse head. +bool GSM3ShieldV1MultiClientProvider::parseQIRD_head(bool& rsp) +{ + char _qird [8]; + prepareAuxLocate(PSTR("+QIRD:"), _qird); + fullBufferSocket = (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()<3); + if(theGSM3ShieldV1ModemCore.theBuffer().locate(_qird)) + { + theGSM3ShieldV1ModemCore.theBuffer().chopUntil(_qird, true); + // Saving more memory, reuse _qird + _qird[0]='\n'; + _qird[1]=0; + theGSM3ShieldV1ModemCore.theBuffer().chopUntil(_qird, true); + rsp = true; + return true; + } + else if(theGSM3ShieldV1ModemCore.theBuffer().locate("OK")) + { + rsp = false; + return true; + } + else + { + rsp = false; + return false; + } +} +/* +//Read socket main function. +int GSM3ShieldV1MultiClientProvider::readSocket() +{ + char charSocket; + charSocket = theGSM3ShieldV1ModemCore.theBuffer().read(); + //Case buffer not full + if (!fullBufferSocket) + { + //The last part of the buffer after data is CRLFOKCRLF + if (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()==125) + { + //Start again availableSocket function. + flagReadingSocket=0; + theGSM3ShieldV1ModemCore.openCommand(this,AVAILABLESOCKET); + availableSocketContinue(); + } + } + else if (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()==127) + { + // The buffer is full, no more action is possible until we have read() + theGSM3ShieldV1ModemCore.theBuffer().flush(); + flagReadingSocket = 1; + theGSM3ShieldV1ModemCore.openCommand(this,XON); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + //A small delay to assure data received after xon. + delay(10); + } + //To distinguish the case no more available data in socket. + if (ready()==1) + return charSocket; + else + return 0; +} +*/ +int GSM3ShieldV1MultiClientProvider::readSocket() +{ + char charSocket; + + if(theGSM3ShieldV1ModemCore.theBuffer().availableBytes()==0) + { + Serial.println();Serial.println("*"); + return 0; + } + + charSocket = theGSM3ShieldV1ModemCore.theBuffer().read(); + //Case buffer not full + if (!fullBufferSocket) + { + //The last part of the buffer after data is CRLFOKCRLF + if (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()==125) + { + //Start again availableSocket function. + flagReadingSocket=0; + theGSM3ShieldV1ModemCore.openCommand(this,AVAILABLESOCKET); + availableSocketContinue(); + } + } + else if (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()>=100) + { + // The buffer was full, we have to let the data flow again + // theGSM3ShieldV1ModemCore.theBuffer().flush(); + flagReadingSocket = 1; + theGSM3ShieldV1ModemCore.openCommand(this,XON); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + //A small delay to assure data received after xon. + delay(100); + if(theGSM3ShieldV1ModemCore.theBuffer().availableBytes() >=6) + fullBufferSocket=false; + } + + return charSocket; + +} + +//Read socket main function. +int GSM3ShieldV1MultiClientProvider::peekSocket() +{ + return theGSM3ShieldV1ModemCore.theBuffer().peek(0); +} + + +//Flush SMS main function. +void GSM3ShieldV1MultiClientProvider::flushSocket() +{ + flagReadingSocket=0; + theGSM3ShieldV1ModemCore.openCommand(this,FLUSHSOCKET); + flushSocketContinue(); +} + +//Send SMS continue function. +void GSM3ShieldV1MultiClientProvider::flushSocketContinue() +{ + bool resp; + // 1: Deleting SMS + // 2: wait for OK + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //DEBUG + //Serial.println("Flushing Socket."); + theGSM3ShieldV1ModemCore.theBuffer().flush(); + if (fullBufferSocket) + { + //Serial.println("Buffer flushed."); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + } + else + { + //Serial.println("Socket flushed completely."); + theGSM3ShieldV1ModemCore.closeCommand(1); + } + break; + } +} + +//URC recognize. +// Momentarily, we will not recognize "closes" in client mode +bool GSM3ShieldV1MultiClientProvider::recognizeUnsolicitedEvent(byte oldTail) +{ + return false; +} + +int GSM3ShieldV1MultiClientProvider::getSocket(int socket) +{ + if(socket==-1) + { + int i; + for(i=minSocket(); i<=maxSocket(); i++) + { + if (!(sockets&(0x0001<<i))) + { + sockets|=((0x0001)<<i); + return i; + } + } + } + else + { + if (!(sockets&(0x0001<<socket))) + { + sockets|=((0x0001)<<socket); + return socket; + } + } + return -1; +} + +void GSM3ShieldV1MultiClientProvider::releaseSocket(int socket) +{ + if (sockets&((0x0001)<<socket)) + sockets^=((0x0001)<<socket); +} + +bool GSM3ShieldV1MultiClientProvider::getStatusSocketClient(uint8_t socket) +{ + if(socket>8) + return 0; + if(sockets&(0x0001<<socket)) + return 1; + else + return 0; +}; + + + diff --git a/libraries/GSM/GSM3ShieldV1MultiClientProvider.h b/libraries/GSM/GSM3ShieldV1MultiClientProvider.h new file mode 100644 index 0000000..565a4fc --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1MultiClientProvider.h @@ -0,0 +1,202 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_SHIELDV1CLIENTPROVIDER__ +#define __GSM3_SHIELDV1CLIENTPROVIDER__ + +#include <GSM3MobileClientProvider.h> +#include <GSM3ShieldV1BaseProvider.h> + +class GSM3ShieldV1MultiClientProvider : public GSM3MobileClientProvider, public GSM3ShieldV1BaseProvider +{ + private: + + int remotePort; // Current operation remote port + int idSocket; // Remote ID socket + IPAddress remoteIP; // Remote IP address + + uint16_t sockets; + + /** Continue to connect TCP client function + */ + void connectTCPClientContinue(); + + /** Continue to disconnect TCP client function + */ + void disconnectTCPContinue(); + + /** Continue to begin socket for write function + */ + void beginWriteSocketContinue(); + + /** Continue to end write socket function + */ + void endWriteSocketContinue(); + + /** Continue to available socket function + */ + void availableSocketContinue(); + + /** Continue to flush socket function + */ + void flushSocketContinue(); + + // GATHER! + bool flagReadingSocket; //In case socket data being read, update fullBufferSocket in the next buffer. + bool fullBufferSocket; //To detect if the socket data being read needs another buffer. + bool client1_server0; //1 Client, 0 Server. + + /** Parse QIRD response + @param rsp Returns true if expected response exists + @return true if command executed correctly + */ + bool parseQIRD_head(bool& rsp); + + public: + + /** Constructor */ + GSM3ShieldV1MultiClientProvider(); + + /** Minimum socket + @return 0 + */ + int minSocket(){return 0;}; + + /** Maximum socket + @return 5 + */ + int maxSocket(){return 5;}; + + /** Connect to a remote TCP server + @param server String with IP or server name + @param port Remote port number + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + int connectTCPClient(const char* server, int port, int id_socket); + + /** Connect to a remote TCP server + @param add Remote IP address + @param port Remote port number + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + int connectTCPClient(IPAddress add, int port, int id_socket); + + /** Begin writing through a socket + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + void beginWriteSocket(bool client1Server0, int id_socket); + + /** Write through a socket. MUST go after beginWriteSocket() + @param buf characters to be written (final 0 will not be written) + */ + void writeSocket(const char* buf); + + /** Write through a socket. MUST go after beginWriteSocket() + @param c character to be written + */ + void writeSocket(char c); + + /** Finish current writing + */ + void endWriteSocket(); + + /** Check if there are data to be read in socket. + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Local socket number + @return 0 if command running, 1 if there are data available, 4 if no data, otherwise error + */ + int availableSocket(bool client, int id_socket); // With "available" and "readSocket" ask the modem for 1500 bytes. + + /** Read a character from socket + @return socket + */ + int readSocket(); //If Read() gets to the end of the QIRD response, execute again QIRD SYNCHRONOUSLY + + /** Flush socket + */ + void flushSocket(); + + /** Get a character but will not advance the buffer head + @return character + */ + int peekSocket(); + + /** Close a socket + @param client1Server0 1 if modem acts as client, 0 if acts as server + @param id_socket Local socket number + @return 0 if command running, 1 if success, otherwise error + */ + int disconnectTCP(bool client1Server0, int id_socket); + + /** Recognize unsolicited event + @param from + @return true if successful + */ + bool recognizeUnsolicitedEvent(byte from); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to); + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + /** Get client socket + @param socket + @return socket + */ + int getSocket(int socket=-1); + + /** Release socket + @param socket Socket for release + */ + void releaseSocket(int socket); + + /** Get socket client status + @param socket Socket + @return socket client status + */ + bool getStatusSocketClient(uint8_t socket); + +}; + + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1MultiServerProvider.cpp b/libraries/GSM/GSM3ShieldV1MultiServerProvider.cpp new file mode 100644 index 0000000..6a915f2 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1MultiServerProvider.cpp @@ -0,0 +1,357 @@ +#include <GSM3ShieldV1MultiServerProvider.h> +#include <GSM3ShieldV1ModemCore.h> +#include <Arduino.h> + +#define __NCLIENTS_MAX__ 3 + +char _command_QILOCIP[] PROGMEM = "AT+QILOCIP"; + +GSM3ShieldV1MultiServerProvider::GSM3ShieldV1MultiServerProvider() +{ + theGSM3MobileServerProvider=this; + socketsAsServer=0; + socketsAccepted=0; + theGSM3ShieldV1ModemCore.registerUMProvider(this); +}; + +//Response management. +void GSM3ShieldV1MultiServerProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case NONE: + theGSM3ShieldV1ModemCore.gss.cb.deleteToTheEnd(from); + break; + case CONNECTSERVER: + connectTCPServerContinue(); + break; + case GETIP: + getIPContinue(); + break; + } +} + +//Connect Server main function. +int GSM3ShieldV1MultiServerProvider::connectTCPServer(int port) +{ + // We forget about LocalIP as it has no real use, the modem does whatever it likes + theGSM3ShieldV1ModemCore.setPort(port); + theGSM3ShieldV1ModemCore.openCommand(this,CONNECTSERVER); + connectTCPServerContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Connect Server continue function. +void GSM3ShieldV1MultiServerProvider::connectTCPServerContinue() +{ + + bool resp; + // 1: Read Local IP "AT+QILOCIP" + // 2: Waiting for IP and Set local port "AT+QILPORT" + // 3: Waiting for QILPOR OK andConfigure as server "AT+QISERVER" + // 4: Wait for SERVER OK + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //"AT+QILOCIP." + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_QILOCIP); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + //Not IP storing but the command is necessary. + //if(parseQILOCIP_rsp(local_IP, local_IP_Length, resp)) + // This awful trick saves some RAM bytes + char aux[3]; + aux[0]='\r';aux[1]='\n';aux[2]=0; + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp, aux)) + { + //Response received + if(resp) + { + // Great. Go for the next step + // AT+QILPORT + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QILPORT=\"TCP\","),false); + theGSM3ShieldV1ModemCore.print( theGSM3ShieldV1ModemCore.getPort()); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + case 3: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Response received + if(resp) + { + // OK received + // Great. Go for the next step + // AT+QISERVER + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QISERVER=0,"),false); + theGSM3ShieldV1ModemCore.print(__NCLIENTS_MAX__); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(4); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + case 4: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Response received + // OK received, kathapoon, chessespoon + if (resp) theGSM3ShieldV1ModemCore.closeCommand(1); + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//QILOCIP parse. +bool GSM3ShieldV1MultiServerProvider::parseQILOCIP_rsp(char* LocalIP, int LocalIPlength, bool& rsp) +{ + if (!(theGSM3ShieldV1ModemCore.theBuffer().extractSubstring("\r\n","\r\n", LocalIP, LocalIPlength))) + rsp = false; + else + rsp = true; + return true; +} + +//Get IP main function. +int GSM3ShieldV1MultiServerProvider::getIP(char* LocalIP, int LocalIPlength) +{ + theGSM3ShieldV1ModemCore.setPhoneNumber(LocalIP); + theGSM3ShieldV1ModemCore.setPort(LocalIPlength); + theGSM3ShieldV1ModemCore.openCommand(this,GETIP); + getIPContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +void GSM3ShieldV1MultiServerProvider::getIPContinue() +{ + + bool resp; + // 1: Read Local IP "AT+QILOCIP" + // 2: Waiting for IP. + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //AT+QILOCIP + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_QILOCIP); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(parseQILOCIP_rsp(theGSM3ShieldV1ModemCore.getPhoneNumber(), theGSM3ShieldV1ModemCore.getPort(), resp)) + { + if (resp) + theGSM3ShieldV1ModemCore.closeCommand(1); + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +bool GSM3ShieldV1MultiServerProvider::getSocketAsServerModemStatus(int s) +{ + if (socketsAccepted&(0x0001<<s)) + return true; + else return false; +} + + +//URC recognize. +bool GSM3ShieldV1MultiServerProvider::recognizeUnsolicitedEvent(byte oldTail) +{ + + int nlength; + char auxLocate [15]; + + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("0, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(0); + socketsAccepted &= ~(0x0001); + //Serial.println("JCR_DB REMOTE CLOSED"); + } + + //REMOTE SOCKET CLOSED. + + prepareAuxLocate(PSTR("1, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(1); + socketsAccepted &= ~(0x0002); + } + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("2, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(2); + socketsAccepted &= ~(0x0004); + } + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("3, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(3); + socketsAccepted &= ~(0x0008); + } + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("4, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(4); + socketsAccepted &= ~(0x0010); + } + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("5, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(5); + socketsAccepted &= ~(0x0020); + } + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("6, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(6); + socketsAccepted &= ~(0x0040); + } + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("7, CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + releaseSocket(7); + socketsAccepted &= ~(0x0080); + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("0, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0001); + return true; + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("1, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0002); + return true; + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("2, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0004); + return true; + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("3, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0008); + return true; + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("4, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0010); + return true; + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("5, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0020); + return true; + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("6, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0040); + return true; + } + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("7, REMOTE IP"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.gss.cb.flush(); + socketsAccepted |= (0x0080); + return true; + } + + + return false; +} + +bool GSM3ShieldV1MultiServerProvider::getStatusSocketAsServer(uint8_t socket) +{ + if(socketsAsServer&(0x0001<<socket)) + return 1; + else + return 0; +}; + +void GSM3ShieldV1MultiServerProvider::releaseSocket(int socket) +{ + if (socketsAsServer&((0x0001)<<socket)) + socketsAsServer^=((0x0001)<<socket); +} + +int GSM3ShieldV1MultiServerProvider::getNewOccupiedSocketAsServer() +{ + int i; + ready(); + for(i=minSocketAsServer(); i<=maxSocketAsServer(); i++) + { + if ((!(socketsAsServer&(0x0001<<i))) && getSocketAsServerModemStatus(i)) + { + socketsAsServer|=((0x0001)<<i); + return i; + } + } + // No new occupied + return -1; +} diff --git a/libraries/GSM/GSM3ShieldV1MultiServerProvider.h b/libraries/GSM/GSM3ShieldV1MultiServerProvider.h new file mode 100644 index 0000000..5369334 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1MultiServerProvider.h @@ -0,0 +1,136 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_SHIELDV1SERVERPROVIDER__ +#define __GSM3_SHIELDV1SERVERPROVIDER__ + +#include <GSM3MobileServerProvider.h> +#include <GSM3ShieldV1BaseProvider.h> + +class GSM3ShieldV1MultiServerProvider : public GSM3MobileServerProvider, public GSM3ShieldV1BaseProvider +{ + private: + + // Used sockets + uint8_t socketsAsServer; + uint8_t socketsAccepted; + + /** Continue to connect TCP server function + */ + void connectTCPServerContinue(); + + /** Continue to get IP function + */ + void getIPContinue(); + + /** Release socket + @param socket Socket + */ + void releaseSocket(int socket); + + /** Parse QILOCIP response + @param LocalIP Buffer for save local IP address + @param LocalIPlength Buffer size + @param rsp Returns if expected response exists + @return true if command executed correctly + */ + bool parseQILOCIP_rsp(char* LocalIP, int LocalIPlength, bool& rsp); + + public: + + /** Constructor */ + GSM3ShieldV1MultiServerProvider(); + + /** minSocketAsServer + @return 0 + */ + int minSocketAsServer(){return 0;}; + + /** maxSocketAsServer + @return 0 + */ + int maxSocketAsServer(){return 4;}; + + /** Get modem status + @param s + @return modem status (true if connected) + */ + bool getSocketAsServerModemStatus(int s); + + /** Get new occupied socket as server + @return command error if exists + */ + int getNewOccupiedSocketAsServer(); + + /** Connect server to TCP port + @param port TCP port + @return command error if exists + */ + int connectTCPServer(int port); + + /** Get server IP address + @param LocalIP Buffer for copy IP address + @param LocalIPlength Length of buffer + @return command error if exists + */ + int getIP(char* LocalIP, int LocalIPlength); + +// int disconnectTCP(bool client1Server0, int id_socket); + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + /** Get socket status as server + @param socket Socket to get status + @return socket status + */ + bool getStatusSocketAsServer(uint8_t socket); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to); + + /** Recognize unsolicited event + @param oldTail + @return true if successful + */ + bool recognizeUnsolicitedEvent(byte oldTail); + + +}; + +#endif diff --git a/libraries/GSM/GSM3ShieldV1PinManagement.cpp b/libraries/GSM/GSM3ShieldV1PinManagement.cpp new file mode 100644 index 0000000..0c0c749 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1PinManagement.cpp @@ -0,0 +1,201 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ + +#include <GSM3ShieldV1PinManagement.h> + +// constructor +GSM3ShieldV1PinManagement::GSM3ShieldV1PinManagement() +{ +}; + +// reset the modem for direct access +void GSM3ShieldV1PinManagement::begin() +{ + // reset hardware + gsm.HWrestart(); + + pin_used = false; + + // check modem response + modemAccess.writeModemCommand("AT", 1000); + modemAccess.writeModemCommand("ATE0", 1000); +} + +/* + Check PIN status +*/ +int GSM3ShieldV1PinManagement::isPIN() +{ + String res = modemAccess.writeModemCommand("AT+CPIN?",1000); + // Check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "READY") != NULL) + return 0; + else if(strstr(res_to_compare, "SIM PIN") != NULL) + return 1; + else if(strstr(res_to_compare, "SIM PUK") != NULL) + return -1; + else + return -2; +} + +/* + Check PIN code +*/ +int GSM3ShieldV1PinManagement::checkPIN(String pin) +{ + String res = modemAccess.writeModemCommand("AT+CPIN=" + pin,1000); + // check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "OK") == NULL) + return -1; + else + return 0; +} + +/* + Check PUK code +*/ +int GSM3ShieldV1PinManagement::checkPUK(String puk, String pin) +{ + String res = modemAccess.writeModemCommand("AT+CPIN=\"" + puk + "\",\"" + pin + "\"",1000); + // check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "OK") == NULL) + return -1; + else + return 0; +} + +/* + Change PIN code +*/ +void GSM3ShieldV1PinManagement::changePIN(String old, String pin) +{ + String res = modemAccess.writeModemCommand("AT+CPWD=\"SC\",\"" + old + "\",\"" + pin + "\"",2000); + Serial.println(res); + // check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "OK") != NULL) + Serial.println("Pin changed succesfully."); + else + Serial.println("ERROR"); +} + +/* + Switch PIN status +*/ +void GSM3ShieldV1PinManagement::switchPIN(String pin) +{ + String res = modemAccess.writeModemCommand("AT+CLCK=\"SC\",2",1000); + // check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "0") != NULL) + { + res = modemAccess.writeModemCommand("AT+CLCK=\"SC\",1,\"" + pin + "\"",1000); + // check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "OK") == NULL) + { + Serial.println("ERROR"); + pin_used = false; + } + else + { + Serial.println("OK. PIN lock on."); + pin_used = true; + } + } + else if(strstr(res_to_compare, "1") != NULL) + { + res = modemAccess.writeModemCommand("AT+CLCK=\"SC\",0,\"" + pin + "\"",1000); + // check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "OK") == NULL) + { + Serial.println("ERROR"); + pin_used = true; + } + else + { + Serial.println("OK. PIN lock off."); + pin_used = false; + } + } + else + { + Serial.println("ERROR"); + } +} + +/* + Check registrer +*/ +int GSM3ShieldV1PinManagement::checkReg() +{ + delay(5000); + String res = modemAccess.writeModemCommand("AT+CREG?",1000); + // check response + char res_to_compare[res.length()]; + res.toCharArray(res_to_compare, res.length()); + if(strstr(res_to_compare, "1") != NULL) + return 0; + else if(strstr(res_to_compare, "5") != NULL) + return 1; + else + return -1; +} + +/* + Return if PIN lock is used +*/ +bool GSM3ShieldV1PinManagement::getPINUsed() +{ + return pin_used; +} + +/* + Set if PIN lock is used +*/ +void GSM3ShieldV1PinManagement::setPINUsed(bool used) +{ + pin_used = used; +}
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1PinManagement.h b/libraries/GSM/GSM3ShieldV1PinManagement.h new file mode 100644 index 0000000..ce43cdd --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1PinManagement.h @@ -0,0 +1,103 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef _GSM3SHIELDV1PINMANAGEMENT_ +#define _GSM3SHIELDV1PINMANAGEMENT_ + +#include <GSM3ShieldV1AccessProvider.h> +#include <GSM3ShieldV1DirectModemProvider.h> + +class GSM3ShieldV1PinManagement +{ + + private: + + GSM3ShieldV1AccessProvider gsm; // GSM access required for network register with PIN code + GSM3ShieldV1DirectModemProvider modemAccess; + bool pin_used; // determines if pin lock is activated + + public: + + /** Constructor */ + GSM3ShieldV1PinManagement(); + + /** Check modem response and restart it + */ + void begin(); + + /** Check if PIN lock or PUK lock is activated + @return 0 if PIN lock is off, 1 if PIN lock is on, -1 if PUK lock is on, -2 if error exists + */ + int isPIN(); + + /** Check if PIN code is correct and valid + @param pin PIN code + @return 0 if is correct, -1 if is incorrect + */ + int checkPIN(String pin); + + /** Check if PUK code is correct and establish new PIN code + @param puk PUK code + @param pin New PIN code + @return 0 if successful, otherwise return -1 + */ + int checkPUK(String puk, String pin); + + /** Change PIN code + @param old Old PIN code + @param pin New PIN code + */ + void changePIN(String old, String pin); + + /** Change PIN lock status + @param pin PIN code + */ + void switchPIN(String pin); + + /** Check if modem was registered in GSM/GPRS network + @return 0 if modem was registered, 1 if modem was registered in roaming, -1 if error exists + */ + int checkReg(); + + /** Return if PIN lock is used + @return true if PIN lock is used, otherwise, return false + */ + bool getPINUsed(); + + /** Set PIN lock status + @param used New PIN lock status + */ + void setPINUsed(bool used); +}; + +#endif;
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1SMSProvider.cpp b/libraries/GSM/GSM3ShieldV1SMSProvider.cpp new file mode 100644 index 0000000..9ed075e --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1SMSProvider.cpp @@ -0,0 +1,293 @@ +#include <GSM3ShieldV1SMSProvider.h> +#include <Arduino.h> + +GSM3ShieldV1SMSProvider::GSM3ShieldV1SMSProvider() +{ + theGSM3SMSProvider=this; +}; + +//Send SMS begin function. +int GSM3ShieldV1SMSProvider::beginSMS(const char* to) +{ + if((theGSM3ShieldV1ModemCore.getStatus() != GSM_READY)&&(theGSM3ShieldV1ModemCore.getStatus() != GPRS_READY)) + return 2; + + theGSM3ShieldV1ModemCore.setPhoneNumber((char*)to); + theGSM3ShieldV1ModemCore.openCommand(this,BEGINSMS); + beginSMSContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Send SMS continue function. +void GSM3ShieldV1SMSProvider::beginSMSContinue() +{ + bool resp; + // 1: Send AT + // 2: wait for > and write text + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.setCommandCounter(2); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+CMGS=\""), false); + theGSM3ShieldV1ModemCore.print(theGSM3ShieldV1ModemCore.getPhoneNumber()); + theGSM3ShieldV1ModemCore.print("\"\r"); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp, ">")) + { + if (resp) theGSM3ShieldV1ModemCore.closeCommand(1); + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Send SMS write function. +void GSM3ShieldV1SMSProvider::writeSMS(char c) +{ + theGSM3ShieldV1ModemCore.write(c); +} + +//Send SMS begin function. +int GSM3ShieldV1SMSProvider::endSMS() +{ + theGSM3ShieldV1ModemCore.openCommand(this,ENDSMS); + endSMSContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Send SMS continue function. +void GSM3ShieldV1SMSProvider::endSMSContinue() +{ + bool resp; + // 1: Send #26 + // 2: wait for OK + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.setCommandCounter(2); + theGSM3ShieldV1ModemCore.write(26); + theGSM3ShieldV1ModemCore.print("\r"); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if (resp) + theGSM3ShieldV1ModemCore.closeCommand(1); + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Available SMS main function. +int GSM3ShieldV1SMSProvider::availableSMS() +{ + flagReadingSMS = 0; + theGSM3ShieldV1ModemCore.openCommand(this,AVAILABLESMS); + availableSMSContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Available SMS continue function. +void GSM3ShieldV1SMSProvider::availableSMSContinue() +{ + // 1: AT+CMGL="REC UNREAD",1 + // 2: Receive +CMGL: _id_ ... READ","_numero_" ... \n_mensaje_\nOK + // 3: Send AT+CMGD= _id_ + // 4: Receive OK + // 5: Remaining SMS text in case full buffer. + // This implementation really does not care much if the modem aswers trash to CMGL + bool resp; + //int msglength_aux; + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+CMGL=\"REC UNREAD\",1")); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(parseCMGL_available(resp)) + { + if (!resp) theGSM3ShieldV1ModemCore.closeCommand(4); + else theGSM3ShieldV1ModemCore.closeCommand(1); + } + break; + } + +} + +//SMS available parse. +bool GSM3ShieldV1SMSProvider::parseCMGL_available(bool& rsp) +{ + fullBufferSMS = (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()<=4); + if (!(theGSM3ShieldV1ModemCore.theBuffer().chopUntil("+CMGL:", true))) + rsp = false; + else + rsp = true; + idSMS=theGSM3ShieldV1ModemCore.theBuffer().readInt(); + + //If there are 2 SMS in buffer, response is ...CRLFCRLF+CMGL + twoSMSinBuffer = theGSM3ShieldV1ModemCore.theBuffer().locate("\r\n\r\n+"); + + checkSecondBuffer = 0; + + return true; +} + +//remoteNumber SMS function. +int GSM3ShieldV1SMSProvider::remoteSMSNumber(char* number, int nlength) +{ + theGSM3ShieldV1ModemCore.theBuffer().extractSubstring("READ\",\"", "\"", number, nlength); + + return 1; +} + +//remoteNumber SMS function. +int GSM3ShieldV1SMSProvider::readSMS() +{ + char charSMS; + //First char. + if (!flagReadingSMS) + { + flagReadingSMS = 1; + theGSM3ShieldV1ModemCore.theBuffer().chopUntil("\n", true); + } + charSMS = theGSM3ShieldV1ModemCore.theBuffer().read(); + + //Second Buffer. + if (checkSecondBuffer) + { + checkSecondBuffer = 0; + twoSMSinBuffer = theGSM3ShieldV1ModemCore.theBuffer().locate("\r\n\r\n+"); + } + + //Case the last char in buffer. + if ((!twoSMSinBuffer)&&fullBufferSMS&&(theGSM3ShieldV1ModemCore.theBuffer().availableBytes()==127)) + { + theGSM3ShieldV1ModemCore.theBuffer().flush(); + fullBufferSMS = 0; + checkSecondBuffer = 1; + theGSM3ShieldV1ModemCore.openCommand(this,XON); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + delay(10); + + return charSMS; + } + //Case two SMS in buffer + else if (twoSMSinBuffer) + { + if (theGSM3ShieldV1ModemCore.theBuffer().locate("\r\n\r\n+")) + { + return charSMS; + } + else + { + theGSM3ShieldV1ModemCore.theBuffer().flush(); + theGSM3ShieldV1ModemCore.openCommand(this,XON); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + delay(10); + return 0; + } + } + //Case 1 SMS and buffer not full + else if (!fullBufferSMS) + { + if (theGSM3ShieldV1ModemCore.theBuffer().locate("\r\n\r\nOK")) + { + return charSMS; + } + else + { + theGSM3ShieldV1ModemCore.theBuffer().flush(); + theGSM3ShieldV1ModemCore.openCommand(this,XON); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + delay(10); + return 0; + } + } + //Case to read all the chars in buffer to the end. + else + { + return charSMS; + } +} + +//Read socket main function. +int GSM3ShieldV1SMSProvider::peekSMS() +{ + if (!flagReadingSMS) + { + flagReadingSMS = 1; + theGSM3ShieldV1ModemCore.theBuffer().chopUntil("\n", true); + } + + return theGSM3ShieldV1ModemCore.theBuffer().peek(0); +} + +//Flush SMS main function. +void GSM3ShieldV1SMSProvider::flushSMS() +{ + + //With this, sms data can fill up to 2x128+5x128 bytes. + for (int aux = 0;aux<5;aux++) + { + theGSM3ShieldV1ModemCore.theBuffer().flush(); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + delay(10); + } + + theGSM3ShieldV1ModemCore.openCommand(this,FLUSHSMS); + flushSMSContinue(); +} + +//Send SMS continue function. +void GSM3ShieldV1SMSProvider::flushSMSContinue() +{ + bool resp; + // 1: Deleting SMS + // 2: wait for OK + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.setCommandCounter(2); + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+CMGD="), false); + theGSM3ShieldV1ModemCore.print(idSMS); + theGSM3ShieldV1ModemCore.print("\r"); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + if (resp) theGSM3ShieldV1ModemCore.closeCommand(1); + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +void GSM3ShieldV1SMSProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { +/* case XON: + if (flagReadingSocket) + { +// flagReadingSocket = 0; + fullBufferSocket = (theGSM3ShieldV1ModemCore.theBuffer().availableBytes()<3); + } + else theGSM3ShieldV1ModemCore.openCommand(this,NONE); + break; +*/ case NONE: + theGSM3ShieldV1ModemCore.gss.cb.deleteToTheEnd(from); + break; + case BEGINSMS: + beginSMSContinue(); + break; + case ENDSMS: + endSMSContinue(); + break; + case AVAILABLESMS: + availableSMSContinue(); + break; + case FLUSHSMS: + flushSMSContinue(); + break; + } +} diff --git a/libraries/GSM/GSM3ShieldV1SMSProvider.h b/libraries/GSM/GSM3ShieldV1SMSProvider.h new file mode 100644 index 0000000..408da33 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1SMSProvider.h @@ -0,0 +1,130 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_SHIELDV1SMSPROVIDER__ +#define __GSM3_SHIELDV1SMSPROVIDER__ + +#include <GSM3ShieldV1ModemCore.h> +#include <GSM3MobileSMSProvider.h> +#include <GSM3ShieldV1SMSProvider.h> + + +class GSM3ShieldV1SMSProvider : public GSM3MobileSMSProvider, public GSM3ShieldV1BaseProvider +{ + public: + GSM3ShieldV1SMSProvider(); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to); + + /** Begin a SMS to send it + @param to Destination + @return error command if it exists + */ + inline int beginSMS(const char* to); + + /** Write a SMS character by character + @param c Character + */ + inline void writeSMS(char c); + + /** End SMS + @return error command if it exists + */ + inline int endSMS(); + + /** Check if SMS available and prepare it to be read + @return number of bytes in a received SMS + */ + int availableSMS(); + + /** Read a byte but do not advance the buffer header (circular buffer) + @return character + */ + int peekSMS(); + + /** Delete the SMS from Modem memory and proccess answer + */ + void flushSMS(); + + /** Read sender number phone + @param number Buffer for save number phone + @param nlength Buffer length + @return 1 success, >1 error + */ + int remoteSMSNumber(char* number, int nlength); //Before reading the SMS, read the phone number. + + /** Read one char for SMS buffer (advance circular buffer) + @return character + */ + int readSMS(); + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + private: + + int idSMS; // Id from current SMS being read. + bool flagReadingSMS; // To detect first SMS char if not yet reading. + bool fullBufferSMS; // To detect if the SMS being read needs another buffer. + bool twoSMSinBuffer; // To detect if the buffer has more than 1 SMS. + bool checkSecondBuffer; // Pending to detect if the second buffer has more than 1 SMS. + + /** Continue to begin SMS function + */ + void beginSMSContinue(); + + /** Continue to end SMS function + */ + void endSMSContinue(); + + /** Continue to available SMS function + */ + void availableSMSContinue(); + + /** Continue to flush SMS function + */ + void flushSMSContinue(); + + /** Parse CMGL response + @param rsp Returns true if expected response exists + @return true if command executed correctly + */ + bool parseCMGL_available(bool& rsp); +}; +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1ScanNetworks.cpp b/libraries/GSM/GSM3ShieldV1ScanNetworks.cpp new file mode 100644 index 0000000..23da8a6 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ScanNetworks.cpp @@ -0,0 +1,126 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ + +#include <GSM3ShieldV1ScanNetworks.h> + +GSM3ShieldV1ScanNetworks::GSM3ShieldV1ScanNetworks(bool trace): modem(trace) +{ +} + +GSM3_NetworkStatus_t GSM3ShieldV1ScanNetworks::begin() +{ + modem.begin(); + modem.restartModem(); + // check modem response + modem.writeModemCommand("AT", 1000); + modem.writeModemCommand("ATE0", 1000); + return IDLE; +} + +String GSM3ShieldV1ScanNetworks::getCurrentCarrier() +{ + String modemResponse = modem.writeModemCommand("AT+COPS?", 2000); + + // Parse and check response + char res_to_split[modemResponse.length()]; + modemResponse.toCharArray(res_to_split, modemResponse.length()); + if(strstr(res_to_split,"ERROR") == NULL){ + // Tokenizer + char *ptr_token; + ptr_token = strtok(res_to_split, "\""); + ptr_token = strtok(NULL, "\""); + String final_result = ptr_token; + return final_result; + }else{ + return NULL; + } +} + +String GSM3ShieldV1ScanNetworks::getSignalStrength() +{ + String modemResponse = modem.writeModemCommand("AT+CSQ", 2000); + char res_to_split[modemResponse.length()]; + modemResponse.toCharArray(res_to_split, modemResponse.length()); + if((strstr(res_to_split,"ERROR") == NULL) | (strstr(res_to_split,"99") == NULL)){ + // Tokenizer + char *ptr_token; + ptr_token = strtok(res_to_split, ":"); + ptr_token = strtok(NULL, ":"); + ptr_token = strtok(ptr_token, ","); + String final_result = ptr_token; + final_result.trim(); + return final_result; + }else{ + return NULL; + } +} + +String GSM3ShieldV1ScanNetworks::readNetworks() +{ + String modemResponse = modem.writeModemCommand("AT+COPS=?",20000); + String result; + bool inQuotes=false; + int quoteCounter=0; + for(int i=0; i<modemResponse.length();i++) + { + if(modemResponse[i]=='"') + { + if(!inQuotes) + { + inQuotes=true; + quoteCounter++; + if(quoteCounter==1) + result+="> "; + } + else + { + inQuotes=false; + if(quoteCounter==3) + quoteCounter=0; + if(quoteCounter==1) + result+="\n"; + + } + } + else + { + if(inQuotes&&(quoteCounter==1)) + { + result+=modemResponse[i]; + } + } + } + return result; +} + diff --git a/libraries/GSM/GSM3ShieldV1ScanNetworks.h b/libraries/GSM/GSM3ShieldV1ScanNetworks.h new file mode 100644 index 0000000..f43b164 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ScanNetworks.h @@ -0,0 +1,75 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3SHIELDV1SCANNETWORKS__ +#define __GSM3SHIELDV1SCANNETWORKS__ + +// This class executes band management functions for the ShieldV1 +#include <GSM3ShieldV1AccessProvider.h> +#include <GSM3ShieldV1DirectModemProvider.h> + +class GSM3ShieldV1ScanNetworks +{ + private: + GSM3ShieldV1DirectModemProvider modem; + + public: + + /** Constructor + @param trace if true, dumps all AT dialogue to Serial + @return - + */ + GSM3ShieldV1ScanNetworks(bool trace=false); + + /** begin (forces modem hardware restart, so we begin from scratch) + @return Always returns IDLE status + */ + GSM3_NetworkStatus_t begin(); + + /** Read current carrier + @return Current carrier + */ + String getCurrentCarrier(); + + /** Obtain signal strength + @return Signal Strength + */ + String getSignalStrength(); + + /** Search available carriers + @return A string with list of networks available + */ + String readNetworks(); +}; + +#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1ServerProvider.cpp b/libraries/GSM/GSM3ShieldV1ServerProvider.cpp new file mode 100644 index 0000000..77f5436 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ServerProvider.cpp @@ -0,0 +1,205 @@ +#include <GSM3ShieldV1ServerProvider.h> +#include <GSM3ShieldV1ModemCore.h> +#include <Arduino.h> + +GSM3ShieldV1ServerProvider::GSM3ShieldV1ServerProvider() +{ + theGSM3MobileServerProvider=this; +}; + +//Response management. +void GSM3ShieldV1ServerProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case NONE: + theGSM3ShieldV1ModemCore.gss.cb.deleteToTheEnd(from); + break; + case CONNECTSERVER: + connectTCPServerContinue(); + break; + /*case GETIP: + getIPContinue(); + break;*/ + } +} + +//Connect Server main function. +int GSM3ShieldV1ServerProvider::connectTCPServer(int port) +{ + // We forget about LocalIP as it has no real use, the modem does whatever it likes + theGSM3ShieldV1ModemCore.setPort(port); + theGSM3ShieldV1ModemCore.openCommand(this,CONNECTSERVER); + // From this moment on we wait for a call + connectTCPServerContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Connect Server continue function. +void GSM3ShieldV1ServerProvider::connectTCPServerContinue() +{ + + bool resp; + // 1: Read Local IP "AT+QILOCIP" + // 2: Waiting for IP and Set local port "AT+QILPORT" + // 3: Waiting for QILPOR OK andConfigure as server "AT+QISERVER" + // 4: Wait for SERVER OK + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //"AT+QILOCIP." + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QILOCIP")); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + //Not IP storing but the command is necessary. + //if(parseQILOCIP_rsp(local_IP, local_IP_Length, resp)) + // This awful trick saves some RAM bytes + char aux[3]; + aux[0]='\r';aux[1]='\n';aux[2]=0; + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp, aux)) + { + //Response received + if(resp) + { + // Great. Go for the next step + // AT+QILPORT + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QILPORT=\"TCP\","),false); + theGSM3ShieldV1ModemCore.print( theGSM3ShieldV1ModemCore.getPort()); + theGSM3ShieldV1ModemCore.print('\r'); + theGSM3ShieldV1ModemCore.setCommandCounter(3); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + case 3: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Response received + if(resp) + { + // OK received + // Great. Go for the next step + // AT+QISERVER + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+QISERVER"),true); + theGSM3ShieldV1ModemCore.setCommandCounter(4); + } + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + case 4: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + // Response received + // OK received, kathapoon, chessespoon + if (resp) + { + theGSM3ShieldV1ModemCore.registerUMProvider(this); + theGSM3ShieldV1ModemCore.closeCommand(1); + } + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//QILOCIP parse. +/*bool GSM3ShieldV1ServerProvider::parseQILOCIP_rsp(char* LocalIP, int LocalIPlength, bool& rsp) +{ + if (!(theGSM3ShieldV1ModemCore.theBuffer().extractSubstring("\r\n","\r\n", LocalIP, LocalIPlength))) + rsp = false; + else + rsp = true; + return true; +} + +//Get IP main function. +int GSM3ShieldV1ServerProvider::getIP(char* LocalIP, int LocalIPlength) +{ + theGSM3ShieldV1ModemCore.setPhoneNumber(LocalIP); + theGSM3ShieldV1ModemCore.setPort(LocalIPlength); + theGSM3ShieldV1ModemCore.openCommand(this,GETIP); + getIPContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +void GSM3ShieldV1ServerProvider::getIPContinue() +{ + + bool resp; + // 1: Read Local IP "AT+QILOCIP" + // 2: Waiting for IP. + + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //AT+QILOCIP + theGSM3ShieldV1ModemCore.genericCommand_rq(_command_MonoQILOCIP); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(parseQILOCIP_rsp(theGSM3ShieldV1ModemCore.getPhoneNumber(), theGSM3ShieldV1ModemCore.getPort(), resp)) + { + if (resp) + theGSM3ShieldV1ModemCore.closeCommand(1); + else + theGSM3ShieldV1ModemCore.closeCommand(3); + } + theGSM3ShieldV1ModemCore.theBuffer().flush(); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + break; + } +}*/ + +bool GSM3ShieldV1ServerProvider::getSocketAsServerModemStatus(int s) +{ + if(theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED) + return true; + else + return false; +} + + +//URC recognize. +bool GSM3ShieldV1ServerProvider::recognizeUnsolicitedEvent(byte oldTail) +{ + + int nlength; + char auxLocate [15]; + + //REMOTE SOCKET CLOSED. + prepareAuxLocate(PSTR("CLOSED\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.setStatus(GPRS_READY); + } + + + //REMOTE SOCKET ACCEPTED. + prepareAuxLocate(PSTR("CONNECT\r\n"), auxLocate); + if(theGSM3ShieldV1ModemCore.gss.cb.locate(auxLocate)) + { + //To detect remote socket closed for example inside socket data. + theGSM3ShieldV1ModemCore.theBuffer().chopUntil(auxLocate, true); + theGSM3ShieldV1ModemCore.gss.spaceAvailable(); + theGSM3ShieldV1ModemCore.setStatus(TRANSPARENT_CONNECTED); + return true; + } + + return false; +} + +bool GSM3ShieldV1ServerProvider::getStatusSocketAsServer(uint8_t socket) +{ + return(theGSM3ShieldV1ModemCore.getStatus()==TRANSPARENT_CONNECTED); +}; + +void GSM3ShieldV1ServerProvider::releaseSocket(int socket) +{ +} + +int GSM3ShieldV1ServerProvider::getNewOccupiedSocketAsServer() +{ + return 0; +}
\ No newline at end of file diff --git a/libraries/GSM/GSM3ShieldV1ServerProvider.h b/libraries/GSM/GSM3ShieldV1ServerProvider.h new file mode 100644 index 0000000..93fcd89 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1ServerProvider.h @@ -0,0 +1,126 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ +#ifndef __GSM3_SHIELDV1SERVERPROVIDER__ +#define __GSM3_SHIELDV1SERVERPROVIDER__ + +#include <GSM3MobileServerProvider.h> +#include <GSM3ShieldV1BaseProvider.h> + +class GSM3ShieldV1ServerProvider : public GSM3MobileServerProvider, public GSM3ShieldV1BaseProvider +{ + private: + + /** Continue to connect to server with TCP protocol function + */ + void connectTCPServerContinue(); + + /** Continue to get IP address function + */ + //void getIPContinue(); + + /** Parse QILOCIP response + @param LocalIP Buffer for save local IP address + @param LocalIPlength Buffer size + @param rsp Returns if expected response exists + @return true if command executed correctly + */ + //bool parseQILOCIP_rsp(char* LocalIP, int LocalIPlength, bool& rsp); + + /** Release socket + @param socket Socket + */ + void releaseSocket(int socket); + + public: + + /** Constructor */ + GSM3ShieldV1ServerProvider(); + + /** minSocketAsServer + @return 0 + */ + int minSocketAsServer(){return 0;}; + + /** maxSocketAsServer + @return 0 + */ + int maxSocketAsServer(){return 0;}; + + /** Get modem status + @param s Socket + @return modem status (true if connected) + */ + bool getSocketAsServerModemStatus(int s); + + /** Get new occupied socket as server + @return return -1 if no new socket has been occupied + */ + int getNewOccupiedSocketAsServer(); + + /** Connect server to TCP port + @param port TCP port + @return command error if exists + */ + int connectTCPServer(int port); + + //int getIP(char* LocalIP, int LocalIPlength); +// int disconnectTCP(bool client1Server0, int id_socket); + + /** Get last command status + @return returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + /** Get socket status as server + @param socket Socket to get status + @return socket status + */ + bool getStatusSocketAsServer(uint8_t socket); + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to); + + /** Recognize unsolicited event + @param oldTail + @return true if successful + */ + bool recognizeUnsolicitedEvent(byte oldTail); + + +}; + +#endif diff --git a/libraries/GSM/GSM3ShieldV1VoiceProvider.cpp b/libraries/GSM/GSM3ShieldV1VoiceProvider.cpp new file mode 100644 index 0000000..98a50b9 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1VoiceProvider.cpp @@ -0,0 +1,215 @@ +#include <GSM3ShieldV1VoiceProvider.h> +#include <Arduino.h> + +GSM3ShieldV1VoiceProvider::GSM3ShieldV1VoiceProvider() + { + phonelength=0; + theGSM3MobileVoiceProvider=this; + } + + void GSM3ShieldV1VoiceProvider::initialize() + { + theGSM3ShieldV1ModemCore.registerUMProvider(this); + } + +//Voice Call main function. +int GSM3ShieldV1VoiceProvider::voiceCall(const char* to) +{ + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("ATD"),false); + theGSM3ShieldV1ModemCore.print(to); + theGSM3ShieldV1ModemCore.print(";\r"); + setvoiceCallStatus(CALLING); + return 1; +} + +//Retrieve calling number main function. +int GSM3ShieldV1VoiceProvider::retrieveCallingNumber (char* buffer, int bufsize) +{ + theGSM3ShieldV1ModemCore.setPhoneNumber(buffer); + phonelength = bufsize; + theGSM3ShieldV1ModemCore.setCommandError(0); + theGSM3ShieldV1ModemCore.setCommandCounter(1); + theGSM3ShieldV1ModemCore.openCommand(this,RETRIEVECALLINGNUMBER); + retrieveCallingNumberContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Retrieve calling number Continue function. +void GSM3ShieldV1VoiceProvider::retrieveCallingNumberContinue() +{ + // 1: AT+CLCC + // 2: Receive +CLCC: 1,1,4,0,0,"num",129,"" + // This implementation really does not care much if the modem aswers trash to CMGL + bool resp; + //int msglength_aux; + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("AT+CLCC")); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(parseCLCC(theGSM3ShieldV1ModemCore.getPhoneNumber(), phonelength)) + { + theGSM3ShieldV1ModemCore.closeCommand(1); + } + break; + } +} + +//CLCC parse. +bool GSM3ShieldV1VoiceProvider::parseCLCC(char* number, int nlength) +{ + theGSM3ShieldV1ModemCore.theBuffer().extractSubstring("+CLCC: 1,1,4,0,0,\"","\"", number, nlength); + theGSM3ShieldV1ModemCore.theBuffer().flush(); + return true; +} + +//Answer Call main function. +int GSM3ShieldV1VoiceProvider::answerCall() +{ + theGSM3ShieldV1ModemCore.setCommandError(0); + theGSM3ShieldV1ModemCore.setCommandCounter(1); + theGSM3ShieldV1ModemCore.openCommand(this,ANSWERCALL); + answerCallContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Answer Call continue function. +void GSM3ShieldV1VoiceProvider::answerCallContinue() +{ + // 1: ATA + // 2: Waiting for OK + + // This implementation really does not care much if the modem aswers trash to CMGL + bool resp; + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + // ATA ; + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("ATA")); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + setvoiceCallStatus(TALKING); + if (resp) theGSM3ShieldV1ModemCore.closeCommand(1); + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Hang Call main function. +int GSM3ShieldV1VoiceProvider::hangCall() +{ + theGSM3ShieldV1ModemCore.setCommandError(0); + theGSM3ShieldV1ModemCore.setCommandCounter(1); + theGSM3ShieldV1ModemCore.openCommand(this,HANGCALL); + hangCallContinue(); + return theGSM3ShieldV1ModemCore.getCommandError(); +} + +//Hang Call continue function. +void GSM3ShieldV1VoiceProvider::hangCallContinue() +{ + // 1: ATH + // 2: Waiting for OK + + bool resp; + switch (theGSM3ShieldV1ModemCore.getCommandCounter()) { + case 1: + //ATH + theGSM3ShieldV1ModemCore.genericCommand_rq(PSTR("ATH")); + theGSM3ShieldV1ModemCore.setCommandCounter(2); + break; + case 2: + if(theGSM3ShieldV1ModemCore.genericParse_rsp(resp)) + { + setvoiceCallStatus(IDLE_CALL); + if (resp) theGSM3ShieldV1ModemCore.closeCommand(1); + else theGSM3ShieldV1ModemCore.closeCommand(3); + } + break; + } +} + +//Response management. +void GSM3ShieldV1VoiceProvider::manageResponse(byte from, byte to) +{ + switch(theGSM3ShieldV1ModemCore.getOngoingCommand()) + { + case ANSWERCALL: + answerCallContinue(); + break; + case HANGCALL: + hangCallContinue(); + break; + case RETRIEVECALLINGNUMBER: + retrieveCallingNumberContinue(); + break; + + } +} + +//URC recognize. +bool GSM3ShieldV1VoiceProvider::recognizeUnsolicitedEvent(byte oldTail) +{ + + int nlength; + char auxLocate [15]; + //RING. + prepareAuxLocate(PSTR("RING"), auxLocate); + if(theGSM3ShieldV1ModemCore.theBuffer().locate(auxLocate)) + { + // RING + setvoiceCallStatus(RECEIVINGCALL); + theGSM3ShieldV1ModemCore.theBuffer().flush(); + return true; + } + + //CALL ACEPTED. + prepareAuxLocate(PSTR("+COLP:"), auxLocate); + if(theGSM3ShieldV1ModemCore.theBuffer().locate(auxLocate)) + { + //DEBUG + //Serial.println("Call Accepted."); + setvoiceCallStatus(TALKING); + theGSM3ShieldV1ModemCore.theBuffer().flush(); + return true; + } + + //NO CARRIER. + prepareAuxLocate(PSTR("NO CARRIER"), auxLocate); + if(theGSM3ShieldV1ModemCore.theBuffer().locate(auxLocate)) + { + //DEBUG + //Serial.println("NO CARRIER received."); + setvoiceCallStatus(IDLE_CALL); + theGSM3ShieldV1ModemCore.theBuffer().flush(); + return true; + } + + //BUSY. + prepareAuxLocate(PSTR("BUSY"), auxLocate); + if(theGSM3ShieldV1ModemCore.theBuffer().locate(auxLocate)) + { + //DEBUG + //Serial.println("BUSY received."); + setvoiceCallStatus(IDLE_CALL); + theGSM3ShieldV1ModemCore.theBuffer().flush(); + return true; + } + + //CALL RECEPTION. + prepareAuxLocate(PSTR("+CLIP:"), auxLocate); + if(theGSM3ShieldV1ModemCore.theBuffer().locate(auxLocate)) + { + theGSM3ShieldV1ModemCore.theBuffer().flush(); + setvoiceCallStatus(RECEIVINGCALL); + return true; + } + + return false; +} + + diff --git a/libraries/GSM/GSM3ShieldV1VoiceProvider.h b/libraries/GSM/GSM3ShieldV1VoiceProvider.h new file mode 100644 index 0000000..b961385 --- /dev/null +++ b/libraries/GSM/GSM3ShieldV1VoiceProvider.h @@ -0,0 +1,137 @@ +/* +This file is part of the GSM3 communications library for Arduino +-- Multi-transport communications platform +-- Fully asynchronous +-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1 +-- Voice calls +-- SMS +-- TCP/IP connections +-- HTTP basic clients + +This library has been developed by Telefónica Digital - PDI - +- Physical Internet Lab, as part as its collaboration with +Arduino and the Open Hardware Community. + +September-December 2012 + +This library is free software; you can redistribute it and/or +modify it under the terms of the GNU Lesser General Public +License as published by the Free Software Foundation; either +version 2.1 of the License, or (at your option) any later version. + +This library is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +The latest version of this library can always be found at +https://github.com/BlueVia/Official-Arduino +*/ + +#ifndef _GSM3SHIELDV1VOICEPROVIDER_ +#define _GSM3SHIELDV1VOICEPROVIDER_ + +#include <GSM3MobileVoiceProvider.h> +#include <GSM3ShieldV1ModemCore.h> +#include <GSM3ShieldV1BaseProvider.h> + +class GSM3ShieldV1VoiceProvider : public GSM3MobileVoiceProvider, public GSM3ShieldV1BaseProvider +{ + public: + + /** Constructor */ + GSM3ShieldV1VoiceProvider(); + + /** initilizer, links with modem provider */ + void initialize(); + + + /** Manages modem response + @param from Initial byte of buffer + @param to Final byte of buffer + */ + void manageResponse(byte from, byte to); + + //Call functions. + + /** Launch a voice call + @param number Phone number to be called + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + int voiceCall(const char* number); + + /** Answer a voice call + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + int answerCall(); + + /** Hang a voice call + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + int hangCall(); + + /** Retrieve phone number of caller + @param buffer Buffer for copy phone number + @param bufsize Buffer size + @return If asynchronous, returns 0. If synchronous, 1 if success, other if error + */ + int retrieveCallingNumber(char* buffer, int bufsize); + + /** Get last command status + @return Returns 0 if last command is still executing, 1 success, >1 error + */ + int ready(){return GSM3ShieldV1BaseProvider::ready();}; + + /** Recognize URC + @param oldTail + @return true if successful + */ + bool recognizeUnsolicitedEvent(byte oldTail); + + /** Returns voice call status + @return voice call status + */ + GSM3_voiceCall_st getvoiceCallStatus(){ready(); return _voiceCallstatus;}; + + /** Set voice call status + @param status New status for voice call + */ + void setvoiceCallStatus(GSM3_voiceCall_st status) { _voiceCallstatus = status; }; + + + private: + + int phonelength; // Phone number length + + GSM3_voiceCall_st _voiceCallstatus; // The voiceCall status + + /** Continue to voice call function + */ + void voiceCallContinue(); + + /** Continue to answer call function + */ + void answerCallContinue(); + + /** Continue to hang call function + */ + void hangCallContinue(); + + /** Continue to retrieve calling number function + */ + void retrieveCallingNumberContinue(); + + /** Parse CLCC response from buffer + @param number Number initial for extract substring of response + @param nlength Substring length + @return true if successful + */ + bool parseCLCC(char* number, int nlength); + +}; + +#endif diff --git a/libraries/GSM/GSM3SoftSerial.cpp b/libraries/GSM/GSM3SoftSerial.cpp new file mode 100644 index 0000000..176e8cb --- /dev/null +++ b/libraries/GSM/GSM3SoftSerial.cpp @@ -0,0 +1,537 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include "GSM3SoftSerial.h"
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include "pins_arduino.h"
+#include <HardwareSerial.h>
+#include <Arduino.h>
+
+#if defined(__AVR_ATmega328P__)
+#define __TXPIN__ 3
+#define __RXPIN__ 2
+#define __RXINT__ 3
+#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
+#define __TXPIN__ 3
+#define __RXPIN__ 10
+#define __RXINT__ 4
+#elif defined(__AVR_ATmega32U4__)
+#define __TXPIN__ 3
+#define __RXPIN__ 8
+#define __RXINT__ 3
+#endif
+
+#define __XON__ 0x11
+#define __XOFF__ 0x13
+
+#define _GSMSOFTSERIALFLAGS_ESCAPED_ 0x01
+#define _GSMSOFTSERIALFLAGS_SENTXOFF_ 0x02
+
+//
+// Lookup table
+//
+#define __PARAGRAPHGUARD__ 50
+typedef struct _DELAY_TABLE
+{
+ long baud;
+ unsigned short rx_delay_centering;
+ unsigned short rx_delay_intrabit;
+ unsigned short rx_delay_stopbit;
+ unsigned short tx_delay;
+} DELAY_TABLE;
+
+#if F_CPU == 16000000
+
+static const DELAY_TABLE PROGMEM table[] =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 1, 17, 17, 12, },
+ { 57600, 10, 37, 37, 33, },
+ { 38400, 25, 57, 57, 54, },
+ { 31250, 31, 70, 70, 68, },
+ { 28800, 34, 77, 77, 74, },
+ { 19200, 54, 117, 117, 114, },
+ { 14400, 74, 156, 156, 153, },
+ { 9600, 114, 236, 236, 233, },
+ { 4800, 233, 474, 474, 471, },
+ { 2400, 471, 950, 950, 947, },
+ { 1200, 947, 1902, 1902, 1899, },
+ { 300, 3804, 7617, 7617, 7614, },
+};
+
+const int XMIT_START_ADJUSTMENT = 5;
+
+#elif F_CPU == 8000000
+
+static const DELAY_TABLE table[] PROGMEM =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 1, 5, 5, 3, },
+ { 57600, 1, 15, 15, 13, },
+ { 38400, 2, 25, 26, 23, },
+ { 31250, 7, 32, 33, 29, },
+ { 28800, 11, 35, 35, 32, },
+ { 19200, 20, 55, 55, 52, },
+ { 14400, 30, 75, 75, 72, },
+ { 9600, 50, 114, 114, 112, },
+ { 4800, 110, 233, 233, 230, },
+ { 2400, 229, 472, 472, 469, },
+ { 1200, 467, 948, 948, 945, },
+ { 300, 1895, 3805, 3805, 3802, },
+};
+
+const int XMIT_START_ADJUSTMENT = 4;
+
+#elif F_CPU == 20000000
+
+// 20MHz support courtesy of the good people at macegr.com.
+// Thanks, Garrett!
+
+static const DELAY_TABLE PROGMEM table[] =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 3, 21, 21, 18, },
+ { 57600, 20, 43, 43, 41, },
+ { 38400, 37, 73, 73, 70, },
+ { 31250, 45, 89, 89, 88, },
+ { 28800, 46, 98, 98, 95, },
+ { 19200, 71, 148, 148, 145, },
+ { 14400, 96, 197, 197, 194, },
+ { 9600, 146, 297, 297, 294, },
+ { 4800, 296, 595, 595, 592, },
+ { 2400, 592, 1189, 1189, 1186, },
+ { 1200, 1187, 2379, 2379, 2376, },
+ { 300, 4759, 9523, 9523, 9520, },
+};
+
+const int XMIT_START_ADJUSTMENT = 6;
+
+#else
+
+#error This version of GSM3SoftSerial supports only 20, 16 and 8MHz processors
+
+#endif
+
+GSM3SoftSerial* GSM3SoftSerial::_activeObject=0;
+
+GSM3SoftSerial::GSM3SoftSerial():
+ _rx_delay_centering(0),
+ _rx_delay_intrabit(0),
+ _rx_delay_stopbit(0),
+ _tx_delay(0),
+ cb(this)
+{
+ setTX();
+ setRX();
+ //comStatus=0;
+ //waitingAnswer=false;
+}
+
+int GSM3SoftSerial::begin(long speed)
+{
+ _rx_delay_centering = _rx_delay_intrabit = _rx_delay_stopbit = _tx_delay = 0;
+
+ for (unsigned i=0; i<sizeof(table)/sizeof(table[0]); ++i)
+ {
+ long baud = pgm_read_dword(&table[i].baud);
+ if (baud == speed)
+ {
+ _rx_delay_centering = pgm_read_word(&table[i].rx_delay_centering);
+ _rx_delay_intrabit = pgm_read_word(&table[i].rx_delay_intrabit);
+ _rx_delay_stopbit = pgm_read_word(&table[i].rx_delay_stopbit);
+ _tx_delay = pgm_read_word(&table[i].tx_delay);
+ break;
+ }
+ }
+
+ if (_rx_delay_stopbit)
+ {
+ if (digitalPinToPCICR(__RXPIN__))
+ {
+ *digitalPinToPCICR(__RXPIN__) |= _BV(digitalPinToPCICRbit(__RXPIN__));
+ *digitalPinToPCMSK(__RXPIN__) |= _BV(digitalPinToPCMSKbit(__RXPIN__));
+ }
+ tunedDelay(_tx_delay); // if we were low this establishes the end
+ }
+
+ _activeObject=this;
+
+}
+
+void GSM3SoftSerial::close()
+ {
+ _activeObject=0;
+ }
+
+size_t GSM3SoftSerial::write(uint8_t c)
+{
+ if (_tx_delay == 0)
+ return 0;
+
+ // Characters to be escaped under XON/XOFF control with Quectel
+ if(c==0x11)
+ {
+ this->finalWrite(0x77);
+ return this->finalWrite(0xEE);
+ }
+
+ if(c==0x13)
+ {
+ this->finalWrite(0x77);
+ return this->finalWrite(0xEC);
+ }
+
+ if(c==0x77)
+ {
+ this->finalWrite(0x77);
+ return this->finalWrite(0x88);
+ }
+
+ return this->finalWrite(c);
+}
+
+size_t GSM3SoftSerial::finalWrite(uint8_t c)
+{
+
+ uint8_t oldSREG = SREG;
+ cli(); // turn off interrupts for a clean txmit
+
+ // Write the start bit
+ tx_pin_write(LOW);
+ tunedDelay(_tx_delay + XMIT_START_ADJUSTMENT);
+
+ // Write each of the 8 bits
+ for (byte mask = 0x01; mask; mask <<= 1)
+ {
+ if (c & mask) // choose bit
+ tx_pin_write(HIGH); // send 1
+ else
+ tx_pin_write(LOW); // send 0
+ tunedDelay(_tx_delay);
+ }
+
+ tx_pin_write(HIGH); // restore pin to natural state
+
+ SREG = oldSREG; // turn interrupts back on
+ tunedDelay(_tx_delay);
+
+ return 1;
+}
+
+/*inline*/ void GSM3SoftSerial::tunedDelay(uint16_t delay) {
+ uint8_t tmp=0;
+
+ asm volatile("sbiw %0, 0x01 \n\t"
+ "ldi %1, 0xFF \n\t"
+ "cpi %A0, 0xFF \n\t"
+ "cpc %B0, %1 \n\t"
+ "brne .-10 \n\t"
+ : "+r" (delay), "+a" (tmp)
+ : "0" (delay)
+ );
+}
+
+void GSM3SoftSerial::tx_pin_write(uint8_t pin_state)
+{
+ // Direct port manipulation is faster than digitalWrite/Read
+ if (pin_state == LOW)
+ *_transmitPortRegister &= ~_transmitBitMask;
+ else
+ *_transmitPortRegister |= _transmitBitMask;
+}
+
+void GSM3SoftSerial::setTX()
+{
+ pinMode(__TXPIN__, OUTPUT);
+ digitalWrite(__TXPIN__, HIGH);
+ // For digital port direct manipulation
+ _transmitBitMask = digitalPinToBitMask(__TXPIN__);
+ uint8_t port = digitalPinToPort(__TXPIN__);
+ _transmitPortRegister = portOutputRegister(port);
+}
+
+void GSM3SoftSerial::setRX()
+{
+ pinMode(__RXPIN__, INPUT);
+ digitalWrite(__RXPIN__, HIGH); // pullup for normal logic!
+ // For digital port direct manipulation
+ _receiveBitMask = digitalPinToBitMask(__RXPIN__);
+ uint8_t port = digitalPinToPort(__RXPIN__);
+ _receivePortRegister = portInputRegister(port);
+
+#ifdef __AVR_ATmega32U4__
+//#define __RXINT__ 1
+ attachInterrupt(__RXINT__, GSM3SoftSerial::handle_interrupt, FALLING);
+#endif
+ // This line comes from the High Middle Ages...
+ // attachInterrupt(__RXINT__, GSM3SoftSerial::handle_interrupt, FALLING);
+}
+
+void GSM3SoftSerial::handle_interrupt()
+{
+ if(_activeObject)
+ _activeObject->recv();
+}
+
+uint8_t GSM3SoftSerial::rx_pin_read()
+{
+ // Digital port manipulation
+ return *_receivePortRegister & _receiveBitMask;
+}
+
+void GSM3SoftSerial::recv()
+{
+
+#if GCC_VERSION < 40302
+// Work-around for avr-gcc 4.3.0 OSX version bug
+// Preserve the registers that the compiler misses
+// (courtesy of Arduino forum user *etracer*)
+ asm volatile(
+ "push r18 \n\t"
+ "push r19 \n\t"
+ "push r20 \n\t"
+ "push r21 \n\t"
+ "push r22 \n\t"
+ "push r23 \n\t"
+ "push r26 \n\t"
+ "push r27 \n\t"
+ ::);
+#endif
+
+ bool firstByte=true;
+ byte thisHead;
+
+ uint8_t d = 0;
+ bool morebytes=false;
+ //bool fullbuffer=(cb.availableBytes()<3);
+ bool fullbuffer;
+ bool capturado_fullbuffer = 0;
+ int i;
+ byte oldTail;
+
+ // If RX line is high, then we don't see any start bit
+ // so interrupt is probably not for us
+ if (!rx_pin_read())
+ {
+ do
+ {
+ oldTail=cb.getTail();
+ // Wait approximately 1/2 of a bit width to "center" the sample
+ tunedDelay(_rx_delay_centering);
+
+ fullbuffer=(cb.availableBytes()<6);
+
+
+ if(fullbuffer&&(!capturado_fullbuffer))
+ tx_pin_write(LOW);
+
+
+ // Read each of the 8 bits
+ for (uint8_t i=0x1; i; i <<= 1)
+ {
+ tunedDelay(_rx_delay_intrabit);
+ uint8_t noti = ~i;
+ if (rx_pin_read())
+ d |= i;
+ else // else clause added to ensure function timing is ~balanced
+ d &= noti;
+
+ if(fullbuffer&&(!capturado_fullbuffer))
+ {
+ if((uint8_t)__XOFF__ & i)
+ tx_pin_write(HIGH);
+ else
+ tx_pin_write(LOW);
+ }
+ }
+
+ if(fullbuffer&&(!capturado_fullbuffer))
+ {
+ tunedDelay(_rx_delay_intrabit);
+ tx_pin_write(HIGH);
+ }
+
+ // So, we know the buffer is full, and we have sent a XOFF
+ if (fullbuffer)
+ {
+ capturado_fullbuffer =1;
+ _flags |=_GSMSOFTSERIALFLAGS_SENTXOFF_;
+ }
+
+
+ // skip the stop bit
+ if (!fullbuffer) tunedDelay(_rx_delay_stopbit);
+
+ if(keepThisChar(&d))
+ {
+ cb.write(d);
+ if(firstByte)
+ {
+ firstByte=false;
+ thisHead=cb.getTail();
+ }
+ }
+
+
+ // This part is new. It is used to detect the end of a "paragraph"
+ // Caveat: the old fashion would let processor a bit of time between bytes,
+ // that here is lost
+ // This active waiting avoids drifting
+ morebytes=false;
+ // TO-DO. This PARAGRAPHGUARD is empyric. We should test it for every speed
+ for(i=0;i<__PARAGRAPHGUARD__;i++)
+ {
+ tunedDelay(1);
+ if(!rx_pin_read())
+ {
+ morebytes=true;
+ break;
+ }
+ }
+ }while(morebytes);
+ // If we find a line feed, we are at the end of a paragraph
+ // check!
+
+ if (fullbuffer)
+ {
+ // And... go handle it!
+ if(mgr)
+ mgr->manageMsg(thisHead, cb.getTail());
+ }
+ else if(d==10)
+ {
+ // And... go handle it!
+ if(mgr)
+ mgr->manageMsg(thisHead, cb.getTail());
+ }
+ else if (d==32)
+ {
+ // And... go handle it!
+ if(mgr)
+ mgr->manageMsg(thisHead, cb.getTail());
+ }
+ }
+
+#if GCC_VERSION < 40302
+// Work-around for avr-gcc 4.3.0 OSX version bug
+// Restore the registers that the compiler misses
+ asm volatile(
+ "pop r27 \n\t"
+ "pop r26 \n\t"
+ "pop r23 \n\t"
+ "pop r22 \n\t"
+ "pop r21 \n\t"
+ "pop r20 \n\t"
+ "pop r19 \n\t"
+ "pop r18 \n\t"
+ ::);
+#endif
+}
+
+bool GSM3SoftSerial::keepThisChar(uint8_t* c)
+{
+ // Horrible things for Quectel XON/XOFF
+ // 255 is the answer to a XOFF
+ // It comes just once
+ if((*c==255)&&(_flags & _GSMSOFTSERIALFLAGS_SENTXOFF_))
+ {
+ _flags ^= _GSMSOFTSERIALFLAGS_SENTXOFF_;
+ return false;
+ }
+
+ // 0x77, w, is the escape character
+ if(*c==0x77)
+ {
+ _flags |= _GSMSOFTSERIALFLAGS_ESCAPED_;
+ return false;
+ }
+
+ // and these are the escaped codes
+ if(_flags & _GSMSOFTSERIALFLAGS_ESCAPED_)
+ {
+ if(*c==0xEE)
+ *c=0x11;
+ else if(*c==0xEC)
+ *c=0x13;
+ else if(*c==0x88)
+ *c=0x77;
+
+ _flags ^= _GSMSOFTSERIALFLAGS_ESCAPED_;
+ return true;
+ }
+
+ return true;
+}
+
+void GSM3SoftSerial::spaceAvailable()
+{
+ // If there is spaceAvailable in the buffer, lets send a XON
+ finalWrite((byte)__XON__);
+}
+
+
+// This is here to avoid problems with Arduino compiler
+void GSM3SoftSerialMgr::manageMsg(byte from, byte to){};
+
+//#define PCINT1_vect _VECTOR(2)
+//#undef PCINT1_vect
+
+#if defined(PCINT0_vect)
+ISR(PCINT0_vect)
+{
+ GSM3SoftSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT1_vect)
+ISR(PCINT1_vect)
+{
+ GSM3SoftSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT2_vect)
+ISR(PCINT2_vect)
+{
+ GSM3SoftSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT3_vect)
+ISR(PCINT3_vect)
+{
+ GSM3SoftSerial::handle_interrupt();
+}
+#endif
+
diff --git a/libraries/GSM/GSM3SoftSerial.h b/libraries/GSM/GSM3SoftSerial.h new file mode 100644 index 0000000..c35ef68 --- /dev/null +++ b/libraries/GSM/GSM3SoftSerial.h @@ -0,0 +1,174 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef __GSM3_SOFTSERIAL__
+#define __GSM3_SOFTSERIAL__
+
+// An adaptation of NewSoftSerial for Modem Shields
+// Assumes directly that Serial is attached to Pins 2 and 3, not inverse
+// We are implementing it because NewSoftSerial does not deal correctly with floods
+// of data
+#include "GSM3CircularBuffer.h"
+#include <avr/pgmspace.h>
+
+/*
+#define _COMSTATUS_ANSWERRECEIVED_ 0x100
+#define _COMSTATUS_SMSRECEIVED_ 0x80
+#define _COMSTATUS_CALLRECEIVED_ 0x40
+
+// PLEASE, when accessing the sockets use "for" and >> (bitwise operator)
+#define _COMSTATUS_SOCKET6RECEIVED_ 0x20
+#define _COMSTATUS_SOCKET5RECEIVED_ 0x10
+#define _COMSTATUS_SOCKET4RECEIVED_ 0x08
+#define _COMSTATUS_SOCKET3RECEIVED_ 0x04
+#define _COMSTATUS_SOCKET2RECEIVED_ 0x02
+#define _COMSTATUS_SOCKET1RECEIVED_ 0x01
+
+#define __CALLTABLEMASK__ 0x3
+*/
+
+class GSM3SoftSerialMgr
+{
+ public:
+
+ /** Manages soft serial message
+ @param from Initial byte
+ @param to Final byte
+ */
+ virtual void manageMsg(byte from, byte to);
+};
+
+// This class manages software serial communications
+// Changing it so it doesn't know about modems or whatever
+
+class GSM3SoftSerial : public GSM3CircularBufferManager
+{
+ private:
+
+ uint8_t _receiveBitMask;
+ volatile uint8_t *_receivePortRegister;
+ uint8_t _transmitBitMask;
+ volatile uint8_t *_transmitPortRegister;
+
+ static GSM3SoftSerial* _activeObject;
+ GSM3SoftSerialMgr* mgr;
+
+ uint16_t _rx_delay_centering;
+ uint16_t _rx_delay_intrabit;
+ uint16_t _rx_delay_stopbit;
+ uint16_t _tx_delay;
+ uint8_t _flags;
+
+ /** Write in tx_pin
+ @param pin_state Pin state
+ */
+ void tx_pin_write(uint8_t pin_state);
+
+ /** Set transmission
+ */
+ void setTX();
+
+ /** Set receiver
+ */
+ void setRX();
+
+ /** Receive
+ */
+ void recv();
+
+ /** Read from rx_pin
+ @return receive bit mask
+ */
+ uint8_t rx_pin_read();
+
+ void setComsReceived();
+
+ /** Write a character in serial connection, final action after escaping
+ @param c Character
+ @return 1 if succesful, 0 if transmission delay = 0
+ */
+ virtual size_t finalWrite(uint8_t);
+
+ /** Decide, attending to escapes, if the received character should we
+ kept, forgotten, or changed
+ @param c Character, may be changed
+ @return 1 if shall be kept, 0 if forgotten
+ */
+ bool keepThisChar(uint8_t* c);
+
+ // Checks the buffer for well-known events.
+ //bool recognizeUnsolicitedEvent(byte oldTail);
+
+ public:
+
+ /** Tuned delay in microcontroller
+ @param delay Time to delay
+ */
+ static /*inline */void tunedDelay(uint16_t delay);
+
+ GSM3CircularBuffer cb; // Circular buffer
+
+ /** Register serial manager
+ @param manager Serial manager
+ */
+ inline void registerMgr(GSM3SoftSerialMgr* manager){mgr=manager;};
+
+ /** If there is spaceAvailable in the buffer, lets send a XON
+ */
+ void spaceAvailable();
+
+ /** Write a character in serial connection
+ @param c Character
+ @return 1 if succesful, 0 if transmission delay = 0
+ */
+ virtual size_t write(uint8_t);
+
+ /** Constructor */
+ GSM3SoftSerial();
+
+ /** Establish serial connection
+ @param speed Baudrate
+ @return
+ */
+ int begin(long speed);
+
+ /** Manage interruptions
+ */
+ static inline void handle_interrupt();
+
+ /** Close serial connection
+ */
+ void close();
+};
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/GSM3VoiceCallService.cpp b/libraries/GSM/GSM3VoiceCallService.cpp new file mode 100644 index 0000000..fefb0f0 --- /dev/null +++ b/libraries/GSM/GSM3VoiceCallService.cpp @@ -0,0 +1,144 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#include <GSM3VoiceCallService.h>
+#include <Arduino.h>
+
+#include <GSM3ShieldV1VoiceProvider.h>
+GSM3ShieldV1VoiceProvider theShieldV1VoiceProvider;
+
+// While there is only a shield (ShieldV1) we will include it by default
+
+#define GSM3VOICECALLSERVICE_SYNCH 0x01 // 1: synchronous 0: asynchronous
+#define __TOUT__ 10000
+
+
+
+
+GSM3VoiceCallService::GSM3VoiceCallService(bool synch)
+{
+ if(synch)
+ flags |= GSM3VOICECALLSERVICE_SYNCH;
+ theGSM3MobileVoiceProvider->initialize();
+}
+
+GSM3_voiceCall_st GSM3VoiceCallService::getvoiceCallStatus()
+{
+ if(theGSM3MobileVoiceProvider==0)
+ return IDLE_CALL;
+
+ return theGSM3MobileVoiceProvider->getvoiceCallStatus();
+}
+
+int GSM3VoiceCallService::ready()
+{
+ if(theGSM3MobileVoiceProvider==0)
+ return 0;
+
+ return theGSM3MobileVoiceProvider->ready();
+}
+
+int GSM3VoiceCallService::voiceCall(const char* to, unsigned long timeout)
+{
+ if(theGSM3MobileVoiceProvider==0)
+ return 0;
+
+ if(flags & GSM3VOICECALLSERVICE_SYNCH )
+ {
+ theGSM3MobileVoiceProvider->voiceCall(to);
+ unsigned long m;
+ m=millis();
+ // Wait an answer for timeout
+ while(((millis()-m)< timeout )&&(getvoiceCallStatus()==CALLING))
+ delay(100);
+
+ if(getvoiceCallStatus()==TALKING)
+ return 1;
+ else
+ return 0;
+ }
+ else
+ {
+ return theGSM3MobileVoiceProvider->voiceCall(to);
+ }
+
+}
+
+int GSM3VoiceCallService::answerCall()
+{
+ if(theGSM3MobileVoiceProvider==0)
+ return 0;
+
+ return waitForAnswerIfNeeded(theGSM3MobileVoiceProvider->answerCall());
+}
+
+int GSM3VoiceCallService::hangCall()
+{
+ if(theGSM3MobileVoiceProvider==0)
+ return 0;
+
+ return waitForAnswerIfNeeded(theGSM3MobileVoiceProvider->hangCall());
+}
+
+int GSM3VoiceCallService::retrieveCallingNumber(char* buffer, int bufsize)
+{
+ if(theGSM3MobileVoiceProvider==0)
+ return 0;
+
+ return waitForAnswerIfNeeded(theGSM3MobileVoiceProvider->retrieveCallingNumber(buffer, bufsize));
+}
+
+int GSM3VoiceCallService::waitForAnswerIfNeeded(int returnvalue)
+{
+ // If synchronous
+ if(flags & GSM3VOICECALLSERVICE_SYNCH )
+ {
+ unsigned long m;
+ m=millis();
+ // Wait for __TOUT__
+ while(((millis()-m)< __TOUT__ )&&(ready()==0))
+ delay(100);
+ // If everything was OK, return 1
+ // else (timeout or error codes) return 0;
+ if(ready()==1)
+ return 1;
+ else
+ return 0;
+ }
+ // If not synchronous just kick ahead the coming result
+ return ready();
+}
+
+
+
+
diff --git a/libraries/GSM/GSM3VoiceCallService.h b/libraries/GSM/GSM3VoiceCallService.h new file mode 100644 index 0000000..089d579 --- /dev/null +++ b/libraries/GSM/GSM3VoiceCallService.h @@ -0,0 +1,102 @@ +/*
+This file is part of the GSM3 communications library for Arduino
+-- Multi-transport communications platform
+-- Fully asynchronous
+-- Includes code for the Arduino-Telefonica GSM/GPRS Shield V1
+-- Voice calls
+-- SMS
+-- TCP/IP connections
+-- HTTP basic clients
+
+This library has been developed by Telefónica Digital - PDI -
+- Physical Internet Lab, as part as its collaboration with
+Arduino and the Open Hardware Community.
+
+September-December 2012
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+https://github.com/BlueVia/Official-Arduino
+*/
+#ifndef _GSM3VOICECALLSERVICE_
+#define _GSM3VOICECALLSERVICE_
+
+#include <GSM3MobileNetworkProvider.h>
+#include <GSM3MobileVoiceProvider.h>
+
+class GSM3VoiceCallService
+{
+ private:
+ uint8_t flags;
+
+ /** Make synchronous the functions, if needed
+ @param returnvalue Return value
+ @return returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int waitForAnswerIfNeeded(int returnvalue);
+
+ public:
+ /** Service creation
+ @param synch If true, the service calls are synchronois
+ */
+ GSM3VoiceCallService(bool synch=true);
+
+ /** Voice call status
+ @return Status of the voice call, as described in GSM3MobileVoiceProvider.h
+ { IDLE_CALL, CALLING, RECEIVINGCALL, TALKING};
+ */
+ GSM3_voiceCall_st getvoiceCallStatus();
+
+ /** Get last command status
+ @return Returns 0 if last command is still executing, 1 success, >1 error
+ */
+ int ready();
+
+ /** Place a voice call. If asynchronous, returns while ringing. If synchronous
+ returns if the call is stablished or cancelled.
+ @param to Receiver number. Country extension can be used or not.
+ Char buffer should not be released or used until command is over
+ @param timeout In millisecods. Time ringing before closing the call.
+ Only used in synchronous mode.
+ If zero, ring undefinitely
+ @return In asynchronous mode returns 0 if last command is still executing, 1 success, >1 error
+ In synchronous mode returns 1 if the call is placed, 0 if not.
+ */
+ int voiceCall(const char* to, unsigned long timeout=30000);
+
+ /** Accept an incoming voice call
+ @return In asynchronous mode returns 0 if last command is still executing, 1 success, >1 error
+ In synchronous mode returns 1 if the call is answered, 0 if not.
+ */
+ int answerCall();
+
+ /** Hang a stablished call or an incoming ring
+ @return In asynchronous mode returns 0 if last command is still executing, 1 success, >1 error
+ In synchronous mode returns 1 if the call is answered, 0 if not.
+ */
+ int hangCall();
+
+ /** Retrieve the calling number, put it in buffer
+ @param buffer pointer to the buffer memory
+ @param bufsize size of available memory area, at least should be 10 characters
+ @return In asynchronous mode returns 0 if last command is still executing, 1 success, >1 error
+ In synchronous mode returns 1 if the number is correcty taken 0 if not
+ */
+ int retrieveCallingNumber(char* buffer, int bufsize);
+};
+
+
+#endif
\ No newline at end of file diff --git a/libraries/GSM/License.txt b/libraries/GSM/License.txt new file mode 100644 index 0000000..fb6d90b --- /dev/null +++ b/libraries/GSM/License.txt @@ -0,0 +1,166 @@ +GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. + diff --git a/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino b/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino new file mode 100644 index 0000000..445aab5 --- /dev/null +++ b/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino @@ -0,0 +1,186 @@ +/* + GSM Pachube client + + This sketch connects an analog sensor to Pachube (http://www.pachube.com) + using a Telefonica GSM/GPRS shield. + + This example has been updated to use version 2.0 of the Pachube.com API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + Circuit: + * Analog sensor attached to analog in 0 + * GSM shield attached to an Arduino + * SIM card with a data plan + + created 4 March 2012 + by Tom Igoe + and adapted for GSM shield by David Del Peral + + This code is in the public domain. + + http://arduino.cc/en/Tutorial/GSMExamplesPachubeClient + + */ + +// libraries +#include <GSM.h> + +// Pachube Client data +#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// PIN Number +#define PINNUMBER "" + +// APN data +#define GPRS_APN "GPRS_APN" // replace your GPRS APN +#define GPRS_LOGIN "login" // replace with your GPRS login +#define GPRS_PASSWORD "password" // replace with your GPRS password + +// initialize the library instance: +GSMClient client; +GPRS gprs; +GSM gsmAccess; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +// IPAddress server(216,52,233,121); // numeric IP for api.pachube.com +char server[] = "api.pachube.com"; // name address for pachube API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // connection state + boolean notConnected = true; + + // After starting the modem with GSM.begin() + // attach the shield to the GPRS network with the APN, login and password + while(notConnected) + { + if((gsmAccess.begin(PINNUMBER)==GSM_READY) & + (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY)) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } +} + +void loop() +{ + // read the analog sensor: + int sensorReading = analogRead(A0); + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + if (client.available()) + { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) + { + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && ((millis() - lastConnectionTime) > postingInterval)) + { + sendData(sensorReading); + } + + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +/* + This method makes a HTTP connection to the server. +*/ +void sendData(int thisData) +{ + // if there's a successful connection: + if (client.connect(server, 80)) + { + Serial.println("connecting..."); + + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.print("Host: api.pachube.com\n"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + + // calculate the length of the sensor reading in bytes: + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); + + // last pieces of the HTTP PUT request: + client.print("Content-Type: text/csv\n"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.print("sensor1,"); + client.println(thisData); + } + else + { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted + lastConnectionTime = millis(); +} + +/* + This method calculates the number of digits in the + sensor reading. Since each digit of the ASCII decimal + representation is a byte, the number of digits equals + the number of bytes. +*/ +int getLength(int someValue) +{ + // there's at least one byte: + int digits = 1; + + // continually divide the value by ten, + // adding one to the digit count for each + // time you divide, until you're at 0: + int dividend = someValue /10; + while (dividend > 0) + { + dividend = dividend /10; + digits++; + } + + // return the number of digits: + return digits; +} + diff --git a/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino b/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino new file mode 100644 index 0000000..f28370e --- /dev/null +++ b/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino @@ -0,0 +1,167 @@ +/* + Pachube client with Strings + + This sketch connects two analog sensors to Pachube (http://www.pachube.com) + through a Telefonica GSM/GPRS shield. + + This example has been updated to use version 2.0 of the Pachube.com API. + To make it work, create a feed with two datastreams, and give them the IDs + sensor1 and sensor2. Or change the code below to match your feed. + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * Analog sensors attached to A0 and A1 + * GSM shield attached to an Arduino + * SIM card with a data plan + + created 8 March 2012 + by Tom Igoe + and adapted for GSM shield by David Del Peral + + This code is in the public domain. + + */ + +// Include the GSM library +#include <GSM.h> + +// Pachube login information +#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Project" // user agent is the project name + +// PIN Number +#define PINNUMBER "" + +// APN data +#define GPRS_APN "GPRS_APN" // replace your GPRS APN +#define GPRS_LOGIN "login" // replace with your GPRS login +#define GPRS_PASSWORD "password" // replace with your GPRS password + +// initialize the library instance +GSMClient client; +GPRS gprs; +GSM gsmAccess; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +// IPAddress server(216,52,233,121); // numeric IP for api.pachube.com +char server[] = "api.pachube.com"; // name address for Pachube API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; // delay between updates to Pachube.com + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // connection state + boolean notConnected = true; + + // After starting the modem with GSM.begin() + // attach the shield to the GPRS network with the APN, login and password + while(notConnected) + { + if((gsmAccess.begin(PINNUMBER)==GSM_READY) & + (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY)) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("Connected to GPRS network"); +} + +void loop() +{ + // read the sensor on A0 + int sensorReading = analogRead(A0); + + // convert the data to a String + String dataString = "sensor1,"; + dataString += sensorReading; + + // you can append multiple readings to this String to + // send the pachube feed multiple values + int otherSensorReading = analogRead(A1); + dataString += "\nsensor2,"; + dataString += otherSensorReading; + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only + if (client.available()) + { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client + if (!client.connected() && lastConnected) + { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) + { + sendData(dataString); + } + // store the state of the connection for next time through + // the loop + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server +void sendData(String thisData) +{ + // if there's a successful connection: + if (client.connect(server, 80)) + { + Serial.println("connecting..."); + + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.print("Host: api.pachube.com\n"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + client.println(thisData.length()); + + // last pieces of the HTTP PUT request + client.print("Content-Type: text/csv\n"); + client.println("Connection: close\n"); + client.println(); + + // here's the actual content of the PUT request + client.println(thisData); + } + else + { + // if you couldn't make a connection + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} diff --git a/libraries/GSM/examples/GsmTwitterClient/GsmTwitterClient.ino b/libraries/GSM/examples/GsmTwitterClient/GsmTwitterClient.ino new file mode 100644 index 0000000..3032141 --- /dev/null +++ b/libraries/GSM/examples/GsmTwitterClient/GsmTwitterClient.ino @@ -0,0 +1,162 @@ +/* + GSM Twitter Client with Strings + + This sketch connects to Twitter using an Arduino GSM shield. + It parses the XML returned, and looks for the string <text>this is a tweet</text> + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * GSM shield attached to an Arduino + * SIM card with a data plan + + created 8 Mar 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/GSMExamplesTwitterClient + + This code is in the public domain. + + */ + +// libraries +#include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// APN data +#define GPRS_APN "APN" // replace your GPRS APN +#define GPRS_LOGIN "LOGIN" // replace with your GPRS login +#define GPRS_PASSWORD "PASSWORD" // replace with your GPRS password + +// initialize the library instance +GSMClient client; +GPRS gprs; +GSM gsmAccess; + +const unsigned long requestInterval = 30*1000; // delay between requests: 30 seconds + +// API Twitter URL +char server[] = "api.twitter.com"; + +boolean requested; // whether you've made a request since connecting +unsigned long lastAttemptTime = 0; // last time you connected to the server, in milliseconds + +String currentLine = ""; // string to hold the text from server +String tweet = ""; // string to hold the tweet +boolean readingTweet = false; // if you're currently reading the tweet + +void setup() +{ + // reserve space for the strings: + currentLine.reserve(256); + tweet.reserve(150); + + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // connection state + boolean notConnected = true; + + // After starting the modem with GSM.begin() + // attach the shield to the GPRS network with the APN, login and password + while(notConnected) + { + if((gsmAccess.begin(PINNUMBER)==GSM_READY) & + (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY)) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("Connected to GPRS network"); + + Serial.println("connecting..."); + connectToServer(); +} + + + +void loop() +{ + char c; + if (client.connected()) + { + if (client.available()) + { + // read incoming bytes: + char inChar = client.read(); + + // add incoming byte to end of line: + currentLine += inChar; + + // if you get a newline, clear the line: + if (inChar == '\n') + { + currentLine = ""; + } + + // if the current line ends with <text>, it will + // be followed by the tweet: + if (currentLine.endsWith("<text>")) + { + // tweet is beginning. Clear the tweet string: + readingTweet = true; + tweet = ""; + } + + // if you're currently reading the bytes of a tweet, + // add them to the tweet String: + if (readingTweet) + { + if (inChar != '<') + { + tweet += inChar; + } + else + { + // if you got a "<" character, + // you've reached the end of the tweet: + readingTweet = false; + Serial.println(tweet); + + // close the connection to the server: + client.stop(); + } + } + } + } + else if (millis() - lastAttemptTime > requestInterval) + { + // if you're not connected, and two minutes have passed since + // your last connection, then attempt to connect again: + connectToServer(); + } +} + +/* + Connect to API Twitter server and do a request for timeline +*/ +void connectToServer() +{ + // attempt to connect, and wait a millisecond: + Serial.println("connecting to server..."); + if (client.connect(server, 80)) + { + Serial.println("making HTTP request..."); + // make HTTP GET request to twitter: + client.println("GET /1/statuses/user_timeline.xml?screen_name=arduino&count=1 HTTP/1.1"); + client.println("HOST: api.twitter.com"); + client.println(); + } + // note the time of this connect attempt: + lastAttemptTime = millis(); +} diff --git a/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino b/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino new file mode 100644 index 0000000..8a96367 --- /dev/null +++ b/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino @@ -0,0 +1,106 @@ +/* + Web client + + This sketch connects to a website through a GSM shield. Specifically, + this example downloads the URL "http://arduino.cc/" and prints it + to the Serial monitor. + + Circuit: + * GSM shield attached to an Arduino + * SIM card with a data plan + + created 8 Mar 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/GSMExamplesWebClient + + */ + +// libraries +#include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// APN data +#define GPRS_APN "GPRS_APN" // replace your GPRS APN +#define GPRS_LOGIN "login" // replace with your GPRS login +#define GPRS_PASSWORD "password" // replace with your GPRS password + +// initialize the library instance +GSMClient client; +GPRS gprs; +GSM gsmAccess; + +// URL, path & port (for example: arduino.cc) +char server[] = "arduino.cc"; +char path[] = "/"; +int port = 80; // port 80 is the default for HTTP + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("Starting Arduino web client."); + // connection state + boolean notConnected = true; + + // After starting the modem with GSM.begin() + // attach the shield to the GPRS network with the APN, login and password + while(notConnected) + { + if((gsmAccess.begin(PINNUMBER)==GSM_READY) & + (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY)) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("connecting..."); + + // if you get a connection, report back via serial: + if (client.connect(server, port)) + { + Serial.println("connected"); + // Make a HTTP request: + client.print("GET "); + client.print(path); + client.println(" HTTP/1.0"); + client.println(); + } + else + { + // if you didn't get a connection to the server: + Serial.println("connection failed"); + } +} + +void loop() +{ + // if there are incoming bytes available + // from the server, read them and print them: + if (client.available()) + { + char c = client.read(); + Serial.print(c); + } + + // if the server's disconnected, stop the client: + if (!client.available() && !client.connected()) + { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + + // do nothing forevermore: + for(;;) + ; + } +} diff --git a/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino b/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino new file mode 100644 index 0000000..e957b4c --- /dev/null +++ b/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino @@ -0,0 +1,118 @@ +/* + GSM Web Server + + A simple web server that shows the value of the analog input pins. + using a GSM shield. + + Circuit: + * GSM shield attached + * Analog inputs attached to pins A0 through A5 (optional) + + created 8 Mar 2012 + by Tom Igoe + */ + +// libraries +#include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// APN data +#define GPRS_APN "GPRS_APN" // replace your GPRS APN +#define GPRS_LOGIN "login" // replace with your GPRS login +#define GPRS_PASSWORD "password" // replace with your GPRS password + + +// initialize the library instance +GPRS gprs; +GSM gsmAccess; // include a 'true' parameter for debug enabled +GSMServer server(80); // port 80 (http default) + +// timeout +const unsigned long __TIMEOUT__ = 10*1000; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // connection state + boolean notConnected = true; + + // Start GSM shield + // If your SIM has PIN, pass it as a parameter of begin() in quotes + while(notConnected) + { + if((gsmAccess.begin(PINNUMBER)==GSM_READY) & + (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY)) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("Connected to GPRS network"); + + // start server + server.begin(); + + //Get IP. + IPAddress LocalIP = gprs.getIPAddress(); + Serial.println("Server IP address="); + Serial.println(LocalIP); +} + +void loop() { + + + // listen for incoming clients + GSMClient client = server.available(); + + + + if (client) + { + while (client.connected()) + { + if (client.available()) + { + Serial.println("Receiving request!"); + bool sendResponse = false; + while(char c=client.read()) { + if (c == '\n') sendResponse = true; + } + + // if you've gotten to the end of the line (received a newline + // character) + if (sendResponse) + { + // send a standard http response header + client.println("HTTP/1.1 200 OK"); + client.println("Content-Type: text/html"); + client.println(); + client.println("<html>"); + // output the value of each analog input pin + for (int analogChannel = 0; analogChannel < 6; analogChannel++) { + client.print("analog input "); + client.print(analogChannel); + client.print(" is "); + client.print(analogRead(analogChannel)); + client.println("<br />"); + } + client.println("</html>"); + //necessary delay + delay(1000); + client.stop(); + } + } + } + } +} + + diff --git a/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino b/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino new file mode 100644 index 0000000..64df44a --- /dev/null +++ b/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino @@ -0,0 +1,116 @@ +/* + Make Voice Call + + This sketch, for the Arduino GSM shield, puts a voice call to + a remote phone number that you enter through the serial monitor. + To make it work, open the serial monitor, and when you see the + READY message, type a phone number. Make sure the serial monitor + is set to send a just newline when you press return. + + Circuit: + * GSM shield + * Voice circuit. + With no voice circuit the call will send nor receive any sound + + + created Mar 2012 + by Javier Zorzano + + This example is in the public domain. + */ + +// libraries +#include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// initialize the library instance +GSM gsmAccess; // include a 'true' parameter for debug enabled +GSMVoiceCall vcs; + +String remoteNumber = ""; // the number you will call +char charbuffer[20]; + +void setup() +{ + + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("Make Voice Call"); + + // connection state + boolean notConnected = true; + + // Start GSM shield + // If your SIM has PIN, pass it as a parameter of begin() in quotes + while(notConnected) + { + if(gsmAccess.begin(PINNUMBER)==GSM_READY) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("GSM initialized."); + Serial.println("Enter phone number to call."); + +} + +void loop() +{ + + // add any incoming characters to the String: + while (Serial.available() > 0) + { + char inChar = Serial.read(); + // if it's a newline, that means you should make the call: + if (inChar == '\n') + { + // make sure the phone number is not too long: + if (remoteNumber.length() < 20) + { + // let the user know you're calling: + Serial.print("Calling to : "); + Serial.println(remoteNumber); + Serial.println(); + + // Call the remote number + remoteNumber.toCharArray(charbuffer, 20); + + + // Check if the receiving end has picked up the call + if(vcs.voiceCall(charbuffer)) + { + Serial.println("Call Established. Enter line to end"); + // Wait for some input from the line + while(Serial.read()!='\n' && (vcs.getvoiceCallStatus()==TALKING)); + // And hang up + vcs.hangCall(); + } + Serial.println("Call Finished"); + remoteNumber=""; + Serial.println("Enter phone number to call."); + } + else + { + Serial.println("That's too long for a phone number. I'm forgetting it"); + remoteNumber = ""; + } + } + else + { + // add the latest character to the message to send: + if(inChar!='\r') + remoteNumber += inChar; + } + } +} + diff --git a/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino b/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino new file mode 100644 index 0000000..af800f4 --- /dev/null +++ b/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino @@ -0,0 +1,98 @@ +/* + SMS receiver + + This sketch, for the Arduino GSM shield, waits for a SMS message + and displays it through the Serial port. + + Circuit: + * GSM shield attached to and Arduino + * SIM card that can receive SMS messages + + created 25 Feb 2012 + by Javier Zorzano / TD + + This example is in the public domain. + + http://arduino.cc/en/Tutorial/GSMExamplesReceiveSMS + +*/ + +// include the GSM library +#include <GSM.h> + +// PIN Number for the SIM +#define PINNUMBER "" + +// initialize the library instances +GSM gsmAccess; +GSM_SMS sms; + +// Array to hold the number a SMS is retreived from +char senderNumber[20]; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("SMS Messages Receiver"); + + // connection state + boolean notConnected = true; + + // Start GSM connection + while(notConnected) + { + if(gsmAccess.begin(PINNUMBER)==GSM_READY) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("GSM initialized"); + Serial.println("Waiting for messages"); +} + +void loop() +{ + char c; + + // If there are any SMSs available() + if (sms.available()) + { + Serial.println("Message received from:"); + + // Get remote number + sms.remoteNumber(senderNumber, 20); + Serial.println(senderNumber); + + // An example of message disposal + // Any messages starting with # should be discarded + if(sms.peek()=='#') + { + Serial.println("Discarded SMS"); + sms.flush(); + } + + // Read message bytes and print them + while(c=sms.read()) + Serial.print(c); + + Serial.println("\nEND OF MESSAGE"); + + // Delete message from modem memory + sms.flush(); + Serial.println("MESSAGE DELETED"); + } + + delay(1000); + +} + + diff --git a/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino b/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino new file mode 100644 index 0000000..14dbc5e --- /dev/null +++ b/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino @@ -0,0 +1,105 @@ +/* + Receive Voice Call + + This sketch, for the Arduino GSM shield, receives voice calls, + displays the calling number, waits a few seconds then hangs up. + + Circuit: + * GSM shield + * Voice circuit. Refer to to the GSM shield getting started guide + at http://arduino.cc/en/Guide/ArduinoGSMShield#toc11 + * SIM card that can accept voice calls + + With no voice circuit the call will connect, but will not send or receive sound + + created Mar 2012 + by Javier Zorzano + + This example is in the public domain. + + http://arduino.cc/en/Tutorial/GSMExamplesReceiveVoiceCall + + */ + +// Include the GSM library +#include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// initialize the library instance +GSM gsmAccess; +GSMVoiceCall vcs; + +// Array to hold the number for the incoming call +char numtel[20]; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("Receive Voice Call"); + + // connection state + boolean notConnected = true; + + // Start GSM shield + // If your SIM has PIN, pass it as a parameter of begin() in quotes + while(notConnected) + { + if(gsmAccess.begin(PINNUMBER)==GSM_READY) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + // This makes sure the modem correctly reports incoming events + vcs.hangCall(); + + Serial.println("Waiting for a call"); +} + +void loop() +{ + // Check the status of the voice call + switch (vcs.getvoiceCallStatus()) + { + case IDLE_CALL: // Nothing is happening + + break; + + case RECEIVINGCALL: // Yes! Someone is calling us + + Serial.println("RECEIVING CALL"); + + // Retrieve the calling number + vcs.retrieveCallingNumber(numtel, 20); + + // Print the calling number + Serial.print("Number:"); + Serial.println(numtel); + + // Answer the call, establish the call + vcs.answerCall(); + break; + + case TALKING: // In this case the call would be established + + Serial.println("TALKING. Press enter to hang up."); + while(Serial.read()!='\n') + delay(100); + vcs.hangCall(); + Serial.println("Hanging up and waiting for the next call."); + break; + } + delay(1000); +} + + diff --git a/libraries/GSM/examples/SendSMS/SendSMS.ino b/libraries/GSM/examples/SendSMS/SendSMS.ino new file mode 100644 index 0000000..677442a --- /dev/null +++ b/libraries/GSM/examples/SendSMS/SendSMS.ino @@ -0,0 +1,110 @@ +/* + SMS sender + + This sketch, for the Arduino GSM shield,sends an SMS message + you enter in the serial monitor. Connect your Arduino with the + GSM shield and SIM card, open the serial monitor, and wait for + the "READY" message to appear in the monitor. Next, type a + message to send and press "return". Make sure the serial + monitor is set to send a newline when you press return. + + Circuit: + * GSM shield + * SIM card that can send SMS + + created 25 Feb 2012 + by Tom Igoe + + This example is in the public domain. + + http://arduino.cc/en/Tutorial/GSMExamplesSendSMS + + */ + +// Include the GSM library +#include <GSM.h> + +#define PINNUMBER "" + +// initialize the library instance +GSM gsmAccess; +GSM_SMS sms; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("SMS Messages Sender"); + + // connection state + boolean notConnected = true; + + // Start GSM shield + // If your SIM has PIN, pass it as a parameter of begin() in quotes + while(notConnected) + { + if(gsmAccess.begin(PINNUMBER)==GSM_READY) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("GSM initialized"); +} + +void loop() +{ + + Serial.print("Enter a mobile number: "); + char remoteNum[20]; // telephone number to send sms + readSerial(remoteNum); + Serial.println(remoteNum); + + // sms text + Serial.print("Now, enter SMS content: "); + char txtMsg[200]; + readSerial(txtMsg); + Serial.println("SENDING"); + Serial.println(); + Serial.println("Message:"); + Serial.println(txtMsg); + + // send the message + sms.beginSMS(remoteNum); + sms.print(txtMsg); + sms.endSMS(); + Serial.println("\nCOMPLETE!\n"); +} + +/* + Read input serial + */ +int readSerial(char result[]) +{ + int i = 0; + while(1) + { + while (Serial.available() > 0) + { + char inChar = Serial.read(); + if (inChar == '\n') + { + result[i] = '\0'; + Serial.flush(); + return 0; + } + if(inChar!='\r') + { + result[i] = inChar; + i++; + } + } + } +} diff --git a/libraries/GSM/examples/Tools/BandManagement/BandManagement.ino b/libraries/GSM/examples/Tools/BandManagement/BandManagement.ino new file mode 100644 index 0000000..84d8c71 --- /dev/null +++ b/libraries/GSM/examples/Tools/BandManagement/BandManagement.ino @@ -0,0 +1,120 @@ +/* + Band Management + + This sketch, for the Arduino GSM shield, checks the band + currently configured in the modem and allows you to change + it. + + Please check http://www.worldtimezone.com/gsm.html + Usual configurations: + Europe, Africa, Middle East: E-GSM(900)+DCS(1800) + USA, Canada, South America: GSM(850)+PCS(1900) + Mexico: PCS(1900) + Brazil: GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900) + + + Circuit: + * GSM shield + + created 12 June 2012 + by Javier Zorzano, Scott Fitzgerald + + This example is in the public domain. + */ + +// libraries +#include <GSM.h> + +// initialize the library instance +GSMBand band; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // Beginning the band manager restarts the modem + Serial.println("Restarting modem..."); + band.begin(); + Serial.println("Modem restarted."); + +}; + + +void loop() +{ + // Get current band + String bandName = band.getBand(); // Get and print band name + Serial.print("Current band:"); + Serial.println(bandName); + Serial.println("Want to change the band you’re on?"); + String newBandName; + newBandName = askUser(); + // Tell the user what we are about to do… + Serial.print("\nConfiguring band "); + Serial.println(newBandName); + // Change the band + boolean operationSuccess; + operationSuccess = band.setBand(newBandName); + // Tell the user if the operation was OK + if(operationSuccess) + { + Serial.println("Success"); + } + else + { + Serial.println("Error while changing band"); + } + + if(operationSuccess) + { + while(true); + } +} + +// This function offers the user different options +// through the Serial interface +// The user selects one +String askUser() +{ + String newBand; + Serial.println("Select band:"); + // Print the different options + Serial.println("1 : E-GSM(900)"); + Serial.println("2 : DCS(1800)"); + Serial.println("3 : PCS(1900)"); + Serial.println("4 : E-GSM(900)+DCS(1800) ex: Europe"); + Serial.println("5 : GSM(850)+PCS(1900) Ex: USA, South Am."); + Serial.println("6 : GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900)"); + + // Empty the incoming buffer + while(Serial.available()) + Serial.read(); + + // Wait for an answer, just look at the first character + while(!Serial.available()); + char c= Serial.read(); + if(c=='1') + newBand=GSM_MODE_EGSM; + else if(c=='2') + newBand=GSM_MODE_DCS; + else if(c=='3') + newBand=GSM_MODE_PCS; + else if(c=='4') + newBand=GSM_MODE_EGSM_DCS; + else if(c=='5') + newBand=GSM_MODE_GSM850_PCS; + else if(c=='6') + newBand=GSM_MODE_GSM850_EGSM_DCS_PCS; + else + newBand="GSM_MODE_UNDEFINED"; + return newBand; +} + + + + + diff --git a/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino b/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino new file mode 100644 index 0000000..0e442eb --- /dev/null +++ b/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino @@ -0,0 +1,95 @@ +/* + + GSM Scan Networks + + This example prints out the IMEI number of the modem, + then checks to see if it's connected to a carrier. If so, + it prints the phone number associated with the card. + Then it scans for nearby networks and prints out their signal strengths. + + Circuit: + * GSM shield + * SIM card + + Created 8 Mar 2012 + by Tom Igoe, implemented by Javier Carazo + Modified 4 Feb 2013 + by Scott Fitzgerald + + http://arduino.cc/en/Tutorial/GSMToolsGsmScanNetworks + + This example code is part of the public domain + */ + +// libraries +#include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// initialize the library instance +GSM gsmAccess; // include a 'true' parameter to enable debugging +GSMScanner scannerNetworks; +GSMModem modemTest; + +// Save data variables +String IMEI = ""; + +// serial monitor result messages +String errortext = "ERROR"; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("GSM networks scanner"); + scannerNetworks.begin(); + + // connection state + boolean notConnected = true; + + // Start GSM shield + // If your SIM has PIN, pass it as a parameter of begin() in quotes + while(notConnected) + { + if(gsmAccess.begin(PINNUMBER)==GSM_READY) + notConnected = false; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + // get modem parameters + // IMEI, modem unique identifier + Serial.print("Modem IMEI: "); + IMEI = modemTest.getIMEI(); + IMEI.replace("\n",""); + if(IMEI != NULL) + Serial.println(IMEI); +} + +void loop() +{ + // scan for existing networks, displays a list of networks + Serial.println("Scanning available networks. May take some seconds."); + Serial.println(scannerNetworks.readNetworks()); + + // currently connected carrier + Serial.print("Current carrier: "); + Serial.println(scannerNetworks.getCurrentCarrier()); + + // returns strength and ber + // signal strength in 0-31 scale. 31 means power > 51dBm + // BER is the Bit Error Rate. 0-7 scale. 99=not detectable + Serial.print("Signal Strength: "); + Serial.print(scannerNetworks.getSignalStrength()); + Serial.println(" [0-31]"); + +} + diff --git a/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino b/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino new file mode 100644 index 0000000..654d1b8 --- /dev/null +++ b/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino @@ -0,0 +1,168 @@ +/* + + This example enables you to change or remove the PIN number of + a SIM card inserted into a GSM shield. + + Circuit: + * GSM shield + * SIM card + + Created 12 Jun 2012 + by David del Peral + + This example code is part of the public domain + + http://arduino.cc/en/Tutorial/GSMToolsPinManagement + + */ + +// libraries +#include <GSM.h> + +// pin manager object +GSMPIN PINManager; + +// save input in serial by user +String user_input = ""; + +// authenticated with PIN code +boolean auth = false; + +// serial monitor result messages +String oktext = "OK"; +String errortext = "ERROR"; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("Change PIN example\n"); + PINManager.begin(); + + // check if the SIM have pin lock + while(!auth){ + int pin_query = PINManager.isPIN(); + if(pin_query == 1) + { + // if SIM is locked, enter PIN code + Serial.print("Enter PIN code: "); + user_input = readSerial(); + // check PIN code + if(PINManager.checkPIN(user_input) == 0) + { + auth = true; + PINManager.setPINUsed(true); + Serial.println(oktext); + } + else + { + // if PIN code was incorrected + Serial.println("Incorrect PIN. Remember that you have 3 opportunities."); + } + } + else if(pin_query == -1) + { + // PIN code is locked, user must enter PUK code + Serial.println("PIN locked. Enter PUK code: "); + String puk = readSerial(); + Serial.print("Now, enter a new PIN code: "); + user_input = readSerial(); + // check PUK code + if(PINManager.checkPUK(puk, user_input) == 0) + { + auth = true; + PINManager.setPINUsed(true); + Serial.println(oktext); + } + else + { + // if PUK o the new PIN are incorrect + Serial.println("Incorrect PUK or invalid new PIN. Try again!."); + } + } + else if(pin_query == -2) + { + // the worst case, PIN and PUK are locked + Serial.println("PIN & PUK locked. Use PIN2/PUK2 in a mobile phone."); + while(true); + } + else + { + // SIM does not requires authetication + Serial.println("No pin necessary."); + auth = true; + } + } + + // start GSM shield + Serial.print("Checking register in GSM network..."); + if(PINManager.checkReg() == 0) + Serial.println(oktext); + // if you are connect by roaming + else if(PINManager.checkReg() == 1) + Serial.println("ROAMING " + oktext); + else + { + // error connection + Serial.println(errortext); + while(true); + } +} + +void loop() +{ + // Function loop implements pin management user menu + // Only if you SIM use pin lock, you can change PIN code + // user_op variables save user option + + Serial.println("Choose an option:\n1 - On/Off PIN."); + if(PINManager.getPINUsed()) + Serial.println("2 - Change PIN."); + String user_op = readSerial(); + if(user_op == "1") + { + Serial.println("Enter your PIN code:"); + user_input = readSerial(); + // activate/deactivate PIN lock + PINManager.switchPIN(user_input); + } + else if(user_op == "2" & PINManager.getPINUsed()) + { + Serial.println("Enter your actual PIN code:"); + String oldPIN = readSerial(); + Serial.println("Now, enter your new PIN code:"); + String newPIN = readSerial(); + // change PIN + PINManager.changePIN(oldPIN, newPIN); + } + else + { + Serial.println("Incorrect option. Try again!."); + } + delay(1000); +} + +/* + Read input serial + */ +String readSerial() +{ + String text = ""; + while(1) + { + while (Serial.available() > 0) + { + char inChar = Serial.read(); + if (inChar == '\n') + { + return text; + } + if(inChar!='\r') + text += inChar; + } + } +} diff --git a/libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino b/libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino new file mode 100644 index 0000000..ab4a2be --- /dev/null +++ b/libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino @@ -0,0 +1,204 @@ +/* + + This sketch test the GSM shield's ability to connect to a + GPERS network. It asks for APN information through the + serial monitor and tries to connect to arduino.cc. + + Circuit: + * GSM shield attached + * SIM card with data plan + + Created 18 Jun 2012 + by David del Peral + + This example code is part of the public domain + + http://arduino.cc/en/Tutorial/GSMToolsTestGPRS + + */ + +// libraries +#include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// initialize the library instance +GSM gsmAccess; // GSM access: include a 'true' parameter for debug enabled +GPRS gprsAccess; // GPRS access +GSMClient client; // Client service for TCP connection + +// messages for serial monitor response +String oktext = "OK"; +String errortext = "ERROR"; + +// URL and path (for example: arduino.cc) +char url[] = "arduino.cc"; +char urlproxy[] = "http://arduino.cc"; +char path[] = "/"; + +// variable for save response obtained +String response = ""; + +// use a proxy +boolean use_proxy = false; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } +} + +void loop() +{ + use_proxy = false; + + // start GSM shield + // if your SIM has PIN, pass it as a parameter of begin() in quotes + Serial.print("Connecting GSM network..."); + if(gsmAccess.begin(PINNUMBER)!=GSM_READY) + { + Serial.println(errortext); + while(true); + } + Serial.println(oktext); + + // read APN introduced by user + char apn[50]; + Serial.print("Enter your APN: "); + readSerial(apn); + Serial.println(apn); + + // Read APN login introduced by user + char login[50]; + Serial.print("Now, enter your login: "); + readSerial(login); + Serial.println(login); + + // read APN password introduced by user + char password[20]; + Serial.print("Finally, enter your password: "); + readSerial(password); + + // attach GPRS + Serial.println("Attaching to GPRS with your APN..."); + if(gprsAccess.attachGPRS(apn, login, password)!=GPRS_READY) + { + Serial.println(errortext); + } + else{ + + Serial.println(oktext); + + // read proxy introduced by user + char proxy[100]; + Serial.print("If your carrier uses a proxy, enter it, if not press enter: "); + readSerial(proxy); + Serial.println(proxy); + + // if user introduced a proxy, asks him for proxy port + int pport; + if(proxy[0] != '\0'){ + // read proxy port introduced by user + char proxyport[10]; + Serial.print("Enter the proxy port: "); + readSerial(proxyport); + // cast proxy port introduced to integer + pport = (int) proxyport; + use_proxy = true; + Serial.println(proxyport); + } + + // connection with arduino.cc and realize HTTP request + Serial.print("Connecting and sending GET request to arduino.cc..."); + int res_connect; + + // if use a proxy, connect with it + if(use_proxy) + res_connect = client.connect(proxy, pport); + else + res_connect = client.connect(url, 80); + + if (res_connect) + { + // make a HTTP 1.0 GET request (client sends the request) + client.print("GET "); + + // if use a proxy, the path is arduino.cc URL + if(use_proxy) + client.print(urlproxy); + else + client.print(path); + + client.println(" HTTP/1.0"); + client.println(); + Serial.println(oktext); + } + else + { + // if you didn't get a connection to the server + Serial.println(errortext); + } + Serial.print("Receiving response..."); + + boolean test = true; + while(test) + { + // if there are incoming bytes available + // from the server, read and check them + if (client.available()) + { + char c = client.read(); + response += c; + + // cast response obtained from string to char array + char responsechar[response.length()+1]; + response.toCharArray(responsechar, response.length()+1); + + // if response includes a "200 OK" substring + if(strstr(responsechar, "200 OK") != NULL){ + Serial.println(oktext); + Serial.println("TEST COMPLETE!"); + test = false; + } + } + + // if the server's disconnected, stop the client: + if (!client.connected()) + { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + test = false; + } + } + } +} + +/* + Read input serial + */ +int readSerial(char result[]) +{ + int i = 0; + while(1) + { + while (Serial.available() > 0) + { + char inChar = Serial.read(); + if (inChar == '\n') + { + result[i] = '\0'; + return 0; + } + if(inChar!='\r') + { + result[i] = inChar; + i++; + } + } + } +} diff --git a/libraries/GSM/examples/Tools/TestModem/TestModem.ino b/libraries/GSM/examples/Tools/TestModem/TestModem.ino new file mode 100644 index 0000000..de61fff --- /dev/null +++ b/libraries/GSM/examples/Tools/TestModem/TestModem.ino @@ -0,0 +1,77 @@ +/* + + This example tests to see if the modem of the + GSM shield is working correctly. You do not need + a SIM card for this example. + + Circuit: + * GSM shield attached + + Created 12 Jun 2012 + by David del Peral + modified 21 Nov 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/GSMToolsTestModem + + This sample code is part of the public domain + + */ + +// libraries +#include <GSM.h> + +// modem verification object +GSMModem modem; + +// IMEI variable +String IMEI = ""; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start modem test (reset and check response) + Serial.print("Starting modem test..."); + if(modem.begin()) + Serial.println("modem.begin() succeeded"); + else + Serial.println("ERROR, no modem answer."); +} + +void loop() +{ + // get modem IMEI + Serial.print("Checking IMEI..."); + IMEI = modem.getIMEI(); + + // check IMEI response + if(IMEI != NULL) + { + // show IMEI in serial monitor + Serial.println("Modem's IMEI: " + IMEI); + // reset modem to check booting: + Serial.print("Resetting modem..."); + modem.begin(); + // get and check IMEI one more time + if(modem.getIMEI() != NULL) + { + Serial.println("Modem is functoning properly"); + } + else + { + Serial.println("Error: getIMEI() failed after modem.begin()"); + } + } + else + { + Serial.println("Error: Could not get IMEI"); + } + // do nothing: + while(true); +} + diff --git a/libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino b/libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino new file mode 100644 index 0000000..5cc3f8a --- /dev/null +++ b/libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino @@ -0,0 +1,85 @@ +/* + Basic Web Server + + A simple web server that replies with nothing, but prints the client's request + and the server IP address. + + Circuit: + * GSM shield attached + + created + by David Cuartielles + modified 21 Nov 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/GSMToolsTestWebServer + + This example code is part of the public domain + */ + #include <GSM.h> + +// PIN Number +#define PINNUMBER "" + +// APN data +#define GPRS_APN "GPRS_APN" // replace your GPRS APN +#define GPRS_LOGIN "login" // replace with your GPRS login +#define GPRS_PASSWORD "password" // replace with your GPRS password + + +// initialize the library instance +GPRS gprs; +GSM gsmAccess; // include a 'true' parameter for debug enabled +GSMServer server(80); // port 80 (http default) + +// timeout +const unsigned long __TIMEOUT__ = 10*1000; + +void setup() +{ + // initialize serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("starting,.."); + // connection state + boolean connected = true; + + // Start GSM shield + // If your SIM has PIN, pass it as a parameter of begin() in quotes + while(!connected) + { + if((gsmAccess.begin(PINNUMBER)==GSM_READY) & + (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY)) + connected = true; + else + { + Serial.println("Not connected"); + delay(1000); + } + } + + Serial.println("Connected to GPRS network"); + + // start server + server.begin(); + + //Get IP. + IPAddress LocalIP = gprs.getIPAddress(); + Serial.println("Server IP address="); + Serial.println(LocalIP); +} + +void loop(){ + GSMClient client = server.available(); + + if (client) { + if (client.available()) { + Serial.write(client.read()); + } +} + +} + diff --git a/libraries/GSM/keywords.txt b/libraries/GSM/keywords.txt new file mode 100644 index 0000000..0662e75 --- /dev/null +++ b/libraries/GSM/keywords.txt @@ -0,0 +1,72 @@ +####################################### +# Syntax Coloring Map For GSM +####################################### +# Class +####################################### + +GSM KEYWORD3 +GSMVoiceCall KEYWORD3 +GSM_SMS KEYWORD3 +GPRS KEYWORD3 +GSMClient KEYWORD3 +GSMServer KEYWORD3 +GSMModem KEYWORD3 +GSMScanner KEYWORD3 +GSMPIN KEYWORD3 +GSMBand KEYWORD3 + +####################################### +# Methods and Functions +####################################### + +begin KEYWORD2 +shutdown KEYWORD2 +gatVoiceCallStatus KEYWORD2 +ready KEYWORD2 +voiceCall KEYWORD2 +answerCall KEYWORD2 +hangCall KEYWORD2 +retrieveCallingNumber KEYWORD2 +beginSMS KEYWORD2 +endSMS KEYWORD2 +remoteNumber KEYWORD2 +attachGPRS KEYWORD2 +begnWrite KEYWORD2 +endWrite KEYWORD2 +getIMEI KEYWORD2 +getCurrentCarrier KEYWORD2 +getSignalStrength KEYWORD2 +readNetworks KEYWORD2 +isPIN KEYWORD2 +checkPIN KEYWORD2 +checkPUK KEYWORD2 +changePIN KEYWORD2 +switchPIN KEYWORD2 +checkReg KEYWORD2 +getPINUsed KEYWORD2 +setPINUsed KEYWORD2 +getBand KEYWORD2 +setBand KEYWORD2 +getvoiceCallStatus KEYWORD2 + +####################################### +# Constants +####################################### + +ERROR LITERAL1 +IDLE LITERAL1 +CONNECTING LITERAL1 +GSM_READY LITERAL1 +GPRS_READY LITERAL1 +TRANSPARENT_CONNECTED LITERAL1 +IDLE_CALL LITERAL1 +CALLING LITERAL1 +RECEIVINGCALL LITERAL1 +TALKING LITERAL1 +GSM_MODE_UNDEFINED LITERAL1 +GSM_MODE_EGSM LITERAL1 +GSM_MODE_DCS LITERAL1 +GSM_MODE_PCS LITERAL1 +GSM_MODE_EGSM_DCS LITERAL1 +GSM_MODE_GSM850_PCS LITERAL1 +GSM_MODE_GSM850_EGSM_DCS_PCS LITERAL1
\ No newline at end of file diff --git a/libraries/SPI/SPI.cpp b/libraries/SPI/SPI.cpp new file mode 100644 index 0000000..5e48073 --- /dev/null +++ b/libraries/SPI/SPI.cpp @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st> + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#include "pins_arduino.h" +#include "SPI.h" + +SPIClass SPI; + +void SPIClass::begin() { + + // Set SS to high so a connected chip will be "deselected" by default + digitalWrite(SS, HIGH); + + // When the SS pin is set as OUTPUT, it can be used as + // a general purpose output port (it doesn't influence + // SPI operations). + pinMode(SS, OUTPUT); + + // Warning: if the SS pin ever becomes a LOW INPUT then SPI + // automatically switches to Slave, so the data direction of + // the SS pin MUST be kept as OUTPUT. + SPCR |= _BV(MSTR); + SPCR |= _BV(SPE); + + // Set direction register for SCK and MOSI pin. + // MISO pin automatically overrides to INPUT. + // By doing this AFTER enabling SPI, we avoid accidentally + // clocking in a single bit since the lines go directly + // from "input" to SPI control. + // http://code.google.com/p/arduino/issues/detail?id=888 + pinMode(SCK, OUTPUT); + pinMode(MOSI, OUTPUT); +} + + +void SPIClass::end() { + SPCR &= ~_BV(SPE); +} + +void SPIClass::setBitOrder(uint8_t bitOrder) +{ + if(bitOrder == LSBFIRST) { + SPCR |= _BV(DORD); + } else { + SPCR &= ~(_BV(DORD)); + } +} + +void SPIClass::setDataMode(uint8_t mode) +{ + SPCR = (SPCR & ~SPI_MODE_MASK) | mode; +} + +void SPIClass::setClockDivider(uint8_t rate) +{ + SPCR = (SPCR & ~SPI_CLOCK_MASK) | (rate & SPI_CLOCK_MASK); + SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((rate >> 2) & SPI_2XCLOCK_MASK); +} + diff --git a/libraries/SPI/SPI.h b/libraries/SPI/SPI.h new file mode 100644 index 0000000..f647d5c --- /dev/null +++ b/libraries/SPI/SPI.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st> + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#ifndef _SPI_H_INCLUDED +#define _SPI_H_INCLUDED + +#include <stdio.h> +#include <Arduino.h> +#include <avr/pgmspace.h> + +#define SPI_CLOCK_DIV4 0x00 +#define SPI_CLOCK_DIV16 0x01 +#define SPI_CLOCK_DIV64 0x02 +#define SPI_CLOCK_DIV128 0x03 +#define SPI_CLOCK_DIV2 0x04 +#define SPI_CLOCK_DIV8 0x05 +#define SPI_CLOCK_DIV32 0x06 +//#define SPI_CLOCK_DIV64 0x07 + +#define SPI_MODE0 0x00 +#define SPI_MODE1 0x04 +#define SPI_MODE2 0x08 +#define SPI_MODE3 0x0C + +#define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR +#define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR +#define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR + +class SPIClass { +public: + inline static byte transfer(byte _data); + + // SPI Configuration methods + + inline static void attachInterrupt(); + inline static void detachInterrupt(); // Default + + static void begin(); // Default + static void end(); + + static void setBitOrder(uint8_t); + static void setDataMode(uint8_t); + static void setClockDivider(uint8_t); +}; + +extern SPIClass SPI; + +byte SPIClass::transfer(byte _data) { + SPDR = _data; + while (!(SPSR & _BV(SPIF))) + ; + return SPDR; +} + +void SPIClass::attachInterrupt() { + SPCR |= _BV(SPIE); +} + +void SPIClass::detachInterrupt() { + SPCR &= ~_BV(SPIE); +} + +#endif diff --git a/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino new file mode 100644 index 0000000..9d77a42 --- /dev/null +++ b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino @@ -0,0 +1,143 @@ +/* + SCP1000 Barometric Pressure Sensor Display + + Shows the output of a Barometric Pressure Sensor on a + Uses the SPI library. For details on the sensor, see: + http://www.sparkfun.com/commerce/product_info.php?products_id=8161 + http://www.vti.fi/en/support/obsolete_products/pressure_sensors/ + + This sketch adapted from Nathan Seidle's SCP1000 example for PIC: + http://www.sparkfun.com/datasheets/Sensors/SCP1000-Testing.zip + + Circuit: + SCP1000 sensor attached to pins 6, 7, 10 - 13: + DRDY: pin 6 + CSB: pin 7 + MOSI: pin 11 + MISO: pin 12 + SCK: pin 13 + + created 31 July 2010 + modified 14 August 2010 + by Tom Igoe + */ + +// the sensor communicates using SPI, so include the library: +#include <SPI.h> + +//Sensor's memory register addresses: +const int PRESSURE = 0x1F; //3 most significant bits of pressure +const int PRESSURE_LSB = 0x20; //16 least significant bits of pressure +const int TEMPERATURE = 0x21; //16 bit temperature reading +const byte READ = 0b11111100; // SCP1000's read command +const byte WRITE = 0b00000010; // SCP1000's write command + +// pins used for the connection with the sensor +// the other you need are controlled by the SPI library): +const int dataReadyPin = 6; +const int chipSelectPin = 7; + +void setup() { + Serial.begin(9600); + + // start the SPI library: + SPI.begin(); + + // initalize the data ready and chip select pins: + pinMode(dataReadyPin, INPUT); + pinMode(chipSelectPin, OUTPUT); + + //Configure SCP1000 for low noise configuration: + writeRegister(0x02, 0x2D); + writeRegister(0x01, 0x03); + writeRegister(0x03, 0x02); + // give the sensor time to set up: + delay(100); +} + +void loop() { + //Select High Resolution Mode + writeRegister(0x03, 0x0A); + + // don't do anything until the data ready pin is high: + if (digitalRead(dataReadyPin) == HIGH) { + //Read the temperature data + int tempData = readRegister(0x21, 2); + + // convert the temperature to celsius and display it: + float realTemp = (float)tempData / 20.0; + Serial.print("Temp[C]="); + Serial.print(realTemp); + + + //Read the pressure data highest 3 bits: + byte pressure_data_high = readRegister(0x1F, 1); + pressure_data_high &= 0b00000111; //you only needs bits 2 to 0 + + //Read the pressure data lower 16 bits: + unsigned int pressure_data_low = readRegister(0x20, 2); + //combine the two parts into one 19-bit number: + long pressure = ((pressure_data_high << 16) | pressure_data_low)/4; + + // display the temperature: + Serial.println("\tPressure [Pa]=" + String(pressure)); + } +} + +//Read from or write to register from the SCP1000: +unsigned int readRegister(byte thisRegister, int bytesToRead ) { + byte inByte = 0; // incoming byte from the SPI + unsigned int result = 0; // result to return + Serial.print(thisRegister, BIN); + Serial.print("\t"); + // SCP1000 expects the register name in the upper 6 bits + // of the byte. So shift the bits left by two bits: + thisRegister = thisRegister << 2; + // now combine the address and the command into one byte + byte dataToSend = thisRegister & READ; + Serial.println(thisRegister, BIN); + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + // send the device the register you want to read: + SPI.transfer(dataToSend); + // send a value of 0 to read the first byte returned: + result = SPI.transfer(0x00); + // decrement the number of bytes left to read: + bytesToRead--; + // if you still have another byte to read: + if (bytesToRead > 0) { + // shift the first byte left, then get the second byte: + result = result << 8; + inByte = SPI.transfer(0x00); + // combine the byte you just got with the previous one: + result = result | inByte; + // decrement the number of bytes left to read: + bytesToRead--; + } + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); + // return the result: + return(result); +} + + +//Sends a write command to SCP1000 + +void writeRegister(byte thisRegister, byte thisValue) { + + // SCP1000 expects the register address in the upper 6 bits + // of the byte. So shift the bits left by two bits: + thisRegister = thisRegister << 2; + // now combine the register address and the command into one byte: + byte dataToSend = thisRegister | WRITE; + + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + + SPI.transfer(dataToSend); //Send register location + SPI.transfer(thisValue); //Send value to record into register + + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); +} + diff --git a/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.ino b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.ino new file mode 100644 index 0000000..9c9c9b6 --- /dev/null +++ b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor/BarometricPressureSensor.ino @@ -0,0 +1,143 @@ +/* + SCP1000 Barometric Pressure Sensor Display + + Shows the output of a Barometric Pressure Sensor on a + Uses the SPI library. For details on the sensor, see: + http://www.sparkfun.com/commerce/product_info.php?products_id=8161 + http://www.vti.fi/en/support/obsolete_products/pressure_sensors/ + + This sketch adapted from Nathan Seidle's SCP1000 example for PIC: + http://www.sparkfun.com/datasheets/Sensors/SCP1000-Testing.zip + + Circuit: + SCP1000 sensor attached to pins 6, 7, 10 - 13: + DRDY: pin 6 + CSB: pin 7 + MOSI: pin 11 + MISO: pin 12 + SCK: pin 13 + + created 31 July 2010 + modified 14 August 2010 + by Tom Igoe + */ + +// the sensor communicates using SPI, so include the library: +#include <SPI.h> + +//Sensor's memory register addresses: +const int PRESSURE = 0x1F; //3 most significant bits of pressure +const int PRESSURE_LSB = 0x20; //16 least significant bits of pressure +const int TEMPERATURE = 0x21; //16 bit temperature reading +cont byte READ = 0b00000000; // SCP1000's read command +const byte WRITE = 0b00000010; // SCP1000's write command +// pins used for the connection with the sensor +// the other you need are controlled by the SPI library): +const int dataReadyPin = 6; +const int chipSelectPin = 7; + +void setup() { + Serial.begin(9600); + + // start the SPI library: + SPI.begin(); + + // initalize the data ready and chip select pins: + pinMode(dataReadyPin, INPUT); + pinMode(chipSelectPin, OUTPUT); + + //Configure SCP1000 for low noise configuration: + writeRegister(0x02, 0x2D); + writeRegister(0x01, 0x03); + writeRegister(0x03, 0x02); + // give the sensor time to set up: + delay(100); +} + +void loop() { + //Select High Resolution Mode + writeRegister(0x03, 0x0A); + + // don't do anything until the data ready pin is high: + if (digitalRead(dataReadyPin) == HIGH) { + //Read the temperature data + int tempData = readRegister(0x21, 2); + + // convert the temperature to celsius and display it: + float realTemp = (float)tempData / 20.0; + Serial.print("Temp[C]="); + Serial.print(realTemp); + + + //Read the pressure data highest 3 bits: + byte pressure_data_high = readRegister(0x1F, 1); + pressure_data_high &= 0b00000111; //you only needs bits 2 to 0 + + //Read the pressure data lower 16 bits: + unsigned int pressure_data_low = readRegister(0x20, 2); + //combine the two parts into one 19-bit number: + long pressure = ((pressure_data_high << 16) | pressure_data_low)/4; + + // display the temperature: + Serial.println("\tPressure [Pa]=" + String(pressure)); + } +} + +//Read from or write to register from the SCP1000: +unsigned int readRegister(byte thisRegister, int bytesToRead ) { + byte inByte = 0; // incoming byte from the SPI + unsigned int result = 0; // result to return + + // SCP1000 expects the register name in the upper 6 bits + // of the byte. So shift the bits left by two bits: + thisRegister = thisRegister << 2; + // now combine the address and the command into one byte + dataToSend = thisRegister & READ; + + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + // send the device the register you want to read: + SPI.transfer(dataToSend); + // send a value of 0 to read the first byte returned: + result = SPI.transfer(0x00); + // decrement the number of bytes left to read: + bytesToRead--; + // if you still have another byte to read: + if (bytesToRead > 0) { + // shift the first byte left, then get the second byte: + result = result << 8; + inByte = SPI.transfer(0x00); + // combine the byte you just got with the previous one: + result = result | inByte; + // decrement the number of bytes left to read: + bytesToRead--; + } + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); + // return the result: + return(result); +} + + +//Sends a write command to SCP1000 + +void writeRegister(byte thisRegister, byte thisValue) { + + // SCP1000 expects the register address in the upper 6 bits + // of the byte. So shift the bits left by two bits: + thisRegister = thisRegister << 2; + // now combine the register address and the command into one byte: + dataToSend = thisRegister | WRITE; + + // take the chip select low to select the device: + digitalWrite(chipSelectPin, LOW); + + SPI.transfer(dataToSend); //Send register location + SPI.transfer(thisValue); //Send value to record into register + + // take the chip select high to de-select: + digitalWrite(chipSelectPin, HIGH); +} + + + diff --git a/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino new file mode 100644 index 0000000..ef97dae --- /dev/null +++ b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino @@ -0,0 +1,71 @@ +/* + Digital Pot Control + + This example controls an Analog Devices AD5206 digital potentiometer. + The AD5206 has 6 potentiometer channels. Each channel's pins are labeled + A - connect this to voltage + W - this is the pot's wiper, which changes when you set it + B - connect this to ground. + + The AD5206 is SPI-compatible,and to command it, you send two bytes, + one with the channel number (0 - 5) and one with the resistance value for the + channel (0 - 255). + + The circuit: + * All A pins of AD5206 connected to +5V + * All B pins of AD5206 connected to ground + * An LED and a 220-ohm resisor in series connected from each W pin to ground + * CS - to digital pin 10 (SS pin) + * SDI - to digital pin 11 (MOSI pin) + * CLK - to digital pin 13 (SCK pin) + + created 10 Aug 2010 + by Tom Igoe + + Thanks to Heather Dewey-Hagborg for the original tutorial, 2005 + +*/ + + +// inslude the SPI library: +#include <SPI.h> + + +// set pin 10 as the slave select for the digital pot: +const int slaveSelectPin = 10; + +void setup() { + // set the slaveSelectPin as an output: + pinMode (slaveSelectPin, OUTPUT); + // initialize SPI: + SPI.begin(); +} + +void loop() { + // go through the six channels of the digital pot: + for (int channel = 0; channel < 6; channel++) { + // change the resistance on this channel from min to max: + for (int level = 0; level < 255; level++) { + digitalPotWrite(channel, level); + delay(10); + } + // wait a second at the top: + delay(100); + // change the resistance on this channel from max to min: + for (int level = 0; level < 255; level++) { + digitalPotWrite(channel, 255 - level); + delay(10); + } + } + +} + +int digitalPotWrite(int address, int value) { + // take the SS pin low to select the chip: + digitalWrite(slaveSelectPin,LOW); + // send in the address and value via SPI: + SPI.transfer(address); + SPI.transfer(value); + // take the SS pin high to de-select the chip: + digitalWrite(slaveSelectPin,HIGH); +}
\ No newline at end of file diff --git a/libraries/SPI/keywords.txt b/libraries/SPI/keywords.txt new file mode 100644 index 0000000..fa76165 --- /dev/null +++ b/libraries/SPI/keywords.txt @@ -0,0 +1,36 @@ +####################################### +# Syntax Coloring Map SPI +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +SPI KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### +begin KEYWORD2 +end KEYWORD2 +transfer KEYWORD2 +setBitOrder KEYWORD2 +setDataMode KEYWORD2 +setClockDivider KEYWORD2 + + +####################################### +# Constants (LITERAL1) +####################################### +SPI_CLOCK_DIV4 LITERAL1 +SPI_CLOCK_DIV16 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_CLOCK_DIV128 LITERAL1 +SPI_CLOCK_DIV2 LITERAL1 +SPI_CLOCK_DIV8 LITERAL1 +SPI_CLOCK_DIV32 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_MODE0 LITERAL1 +SPI_MODE1 LITERAL1 +SPI_MODE2 LITERAL1 +SPI_MODE3 LITERAL1
\ No newline at end of file diff --git a/libraries/Servo/Servo.cpp b/libraries/Servo/Servo.cpp new file mode 100644 index 0000000..a17ed34 --- /dev/null +++ b/libraries/Servo/Servo.cpp @@ -0,0 +1,337 @@ +/*
+ Servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
+ Copyright (c) 2009 Michael Margolis. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+
+ A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
+ The servos are pulsed in the background using the value most recently written using the write() method
+
+ Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
+ Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
+
+ The methods are:
+
+ Servo - Class for manipulating servo motors connected to Arduino pins.
+
+ attach(pin ) - Attaches a servo motor to an i/o pin.
+ attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
+ default min is 544, max is 2400
+
+ write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
+ writeMicroseconds() - Sets the servo pulse width in microseconds
+ read() - Gets the last written servo pulse width as an angle between 0 and 180.
+ readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
+ attached() - Returns true if there is a servo attached.
+ detach() - Stops an attached servos from pulsing its i/o pin.
+
+*/
+
+#include <avr/interrupt.h>
+#include <Arduino.h>
+
+#include "Servo.h"
+
+#define usToTicks(_us) (( clockCyclesPerMicrosecond()* _us) / 8) // converts microseconds to tick (assumes prescale of 8) // 12 Aug 2009
+#define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds
+
+
+#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays // 12 August 2009
+
+//#define NBR_TIMERS (MAX_SERVOS / SERVOS_PER_TIMER)
+
+static servo_t servos[MAX_SERVOS]; // static array of servo structures
+static volatile int8_t Channel[_Nbr_16timers ]; // counter for the servo being pulsed for each timer (or -1 if refresh interval)
+
+uint8_t ServoCount = 0; // the total number of attached servos
+
+
+// convenience macros
+#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / SERVOS_PER_TIMER)) // returns the timer controlling this servo
+#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % SERVOS_PER_TIMER) // returns the index of the servo on this timer
+#define SERVO_INDEX(_timer,_channel) ((_timer*SERVOS_PER_TIMER) + _channel) // macro to access servo index by timer and channel
+#define SERVO(_timer,_channel) (servos[SERVO_INDEX(_timer,_channel)]) // macro to access servo class by timer and channel
+
+#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4) // minimum value in uS for this servo
+#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4) // maximum value in uS for this servo
+
+/************ static functions common to all instances ***********************/
+
+static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t *TCNTn, volatile uint16_t* OCRnA)
+{
+ if( Channel[timer] < 0 )
+ *TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer
+ else{
+ if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && SERVO(timer,Channel[timer]).Pin.isActive == true )
+ digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,LOW); // pulse this channel low if activated
+ }
+
+ Channel[timer]++; // increment to the next channel
+ if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
+ *OCRnA = *TCNTn + SERVO(timer,Channel[timer]).ticks;
+ if(SERVO(timer,Channel[timer]).Pin.isActive == true) // check if activated
+ digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,HIGH); // its an active channel so pulse it high
+ }
+ else {
+ // finished all channels so wait for the refresh period to expire before starting over
+ if( ((unsigned)*TCNTn) + 4 < usToTicks(REFRESH_INTERVAL) ) // allow a few ticks to ensure the next OCR1A not missed
+ *OCRnA = (unsigned int)usToTicks(REFRESH_INTERVAL);
+ else
+ *OCRnA = *TCNTn + 4; // at least REFRESH_INTERVAL has elapsed
+ Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel
+ }
+}
+
+#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
+// Interrupt handlers for Arduino
+#if defined(_useTimer1)
+ISR(TIMER1_COMPA_vect)
+{
+ handle_interrupts(_timer1, &TCNT1, &OCR1A);
+}
+#endif
+
+#if defined(_useTimer3)
+ISR(TIMER3_COMPA_vect)
+{
+ handle_interrupts(_timer3, &TCNT3, &OCR3A);
+}
+#endif
+
+#if defined(_useTimer4)
+ISR(TIMER4_COMPA_vect)
+{
+ handle_interrupts(_timer4, &TCNT4, &OCR4A);
+}
+#endif
+
+#if defined(_useTimer5)
+ISR(TIMER5_COMPA_vect)
+{
+ handle_interrupts(_timer5, &TCNT5, &OCR5A);
+}
+#endif
+
+#elif defined WIRING
+// Interrupt handlers for Wiring
+#if defined(_useTimer1)
+void Timer1Service()
+{
+ handle_interrupts(_timer1, &TCNT1, &OCR1A);
+}
+#endif
+#if defined(_useTimer3)
+void Timer3Service()
+{
+ handle_interrupts(_timer3, &TCNT3, &OCR3A);
+}
+#endif
+#endif
+
+
+static void initISR(timer16_Sequence_t timer)
+{
+#if defined (_useTimer1)
+ if(timer == _timer1) {
+ TCCR1A = 0; // normal counting mode
+ TCCR1B = _BV(CS11); // set prescaler of 8
+ TCNT1 = 0; // clear the timer count
+#if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__)
+ TIFR |= _BV(OCF1A); // clear any pending interrupts;
+ TIMSK |= _BV(OCIE1A) ; // enable the output compare interrupt
+#else
+ // here if not ATmega8 or ATmega128
+ TIFR1 |= _BV(OCF1A); // clear any pending interrupts;
+ TIMSK1 |= _BV(OCIE1A) ; // enable the output compare interrupt
+#endif
+#if defined(WIRING)
+ timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service);
+#endif
+ }
+#endif
+
+#if defined (_useTimer3)
+ if(timer == _timer3) {
+ TCCR3A = 0; // normal counting mode
+ TCCR3B = _BV(CS31); // set prescaler of 8
+ TCNT3 = 0; // clear the timer count
+#if defined(__AVR_ATmega128__)
+ TIFR |= _BV(OCF3A); // clear any pending interrupts;
+ ETIMSK |= _BV(OCIE3A); // enable the output compare interrupt
+#else
+ TIFR3 = _BV(OCF3A); // clear any pending interrupts;
+ TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt
+#endif
+#if defined(WIRING)
+ timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only
+#endif
+ }
+#endif
+
+#if defined (_useTimer4)
+ if(timer == _timer4) {
+ TCCR4A = 0; // normal counting mode
+ TCCR4B = _BV(CS41); // set prescaler of 8
+ TCNT4 = 0; // clear the timer count
+ TIFR4 = _BV(OCF4A); // clear any pending interrupts;
+ TIMSK4 = _BV(OCIE4A) ; // enable the output compare interrupt
+ }
+#endif
+
+#if defined (_useTimer5)
+ if(timer == _timer5) {
+ TCCR5A = 0; // normal counting mode
+ TCCR5B = _BV(CS51); // set prescaler of 8
+ TCNT5 = 0; // clear the timer count
+ TIFR5 = _BV(OCF5A); // clear any pending interrupts;
+ TIMSK5 = _BV(OCIE5A) ; // enable the output compare interrupt
+ }
+#endif
+}
+
+static void finISR(timer16_Sequence_t timer)
+{
+ //disable use of the given timer
+#if defined WIRING // Wiring
+ if(timer == _timer1) {
+ #if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
+ TIMSK1 &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
+ #else
+ TIMSK &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
+ #endif
+ timerDetach(TIMER1OUTCOMPAREA_INT);
+ }
+ else if(timer == _timer3) {
+ #if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
+ TIMSK3 &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
+ #else
+ ETIMSK &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
+ #endif
+ timerDetach(TIMER3OUTCOMPAREA_INT);
+ }
+#else
+ //For arduino - in future: call here to a currently undefined function to reset the timer
+#endif
+}
+
+static boolean isTimerActive(timer16_Sequence_t timer)
+{
+ // returns true if any servo is active on this timer
+ for(uint8_t channel=0; channel < SERVOS_PER_TIMER; channel++) {
+ if(SERVO(timer,channel).Pin.isActive == true)
+ return true;
+ }
+ return false;
+}
+
+
+/****************** end of static functions ******************************/
+
+Servo::Servo()
+{
+ if( ServoCount < MAX_SERVOS) {
+ this->servoIndex = ServoCount++; // assign a servo index to this instance
+ servos[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009
+ }
+ else
+ this->servoIndex = INVALID_SERVO ; // too many servos
+}
+
+uint8_t Servo::attach(int pin)
+{
+ return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH);
+}
+
+uint8_t Servo::attach(int pin, int min, int max)
+{
+ if(this->servoIndex < MAX_SERVOS ) {
+ pinMode( pin, OUTPUT) ; // set servo pin to output
+ servos[this->servoIndex].Pin.nbr = pin;
+ // todo min/max check: abs(min - MIN_PULSE_WIDTH) /4 < 128
+ this->min = (MIN_PULSE_WIDTH - min)/4; //resolution of min/max is 4 uS
+ this->max = (MAX_PULSE_WIDTH - max)/4;
+ // initialize the timer if it has not already been initialized
+ timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
+ if(isTimerActive(timer) == false)
+ initISR(timer);
+ servos[this->servoIndex].Pin.isActive = true; // this must be set after the check for isTimerActive
+ }
+ return this->servoIndex ;
+}
+
+void Servo::detach()
+{
+ servos[this->servoIndex].Pin.isActive = false;
+ timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
+ if(isTimerActive(timer) == false) {
+ finISR(timer);
+ }
+}
+
+void Servo::write(int value)
+{
+ if(value < MIN_PULSE_WIDTH)
+ { // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds)
+ if(value < 0) value = 0;
+ if(value > 180) value = 180;
+ value = map(value, 0, 180, SERVO_MIN(), SERVO_MAX());
+ }
+ this->writeMicroseconds(value);
+}
+
+void Servo::writeMicroseconds(int value)
+{
+ // calculate and store the values for the given channel
+ byte channel = this->servoIndex;
+ if( (channel < MAX_SERVOS) ) // ensure channel is valid
+ {
+ if( value < SERVO_MIN() ) // ensure pulse width is valid
+ value = SERVO_MIN();
+ else if( value > SERVO_MAX() )
+ value = SERVO_MAX();
+
+ value = value - TRIM_DURATION;
+ value = usToTicks(value); // convert to ticks after compensating for interrupt overhead - 12 Aug 2009
+
+ uint8_t oldSREG = SREG;
+ cli();
+ servos[channel].ticks = value;
+ SREG = oldSREG;
+ }
+}
+
+int Servo::read() // return the value as degrees
+{
+ return map( this->readMicroseconds()+1, SERVO_MIN(), SERVO_MAX(), 0, 180);
+}
+
+int Servo::readMicroseconds()
+{
+ unsigned int pulsewidth;
+ if( this->servoIndex != INVALID_SERVO )
+ pulsewidth = ticksToUs(servos[this->servoIndex].ticks) + TRIM_DURATION ; // 12 aug 2009
+ else
+ pulsewidth = 0;
+
+ return pulsewidth;
+}
+
+bool Servo::attached()
+{
+ return servos[this->servoIndex].Pin.isActive ;
+}
diff --git a/libraries/Servo/Servo.h b/libraries/Servo/Servo.h new file mode 100644 index 0000000..8168494 --- /dev/null +++ b/libraries/Servo/Servo.h @@ -0,0 +1,126 @@ +/* + Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + Copyright (c) 2009 Michael Margolis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +/* + + A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. + The servos are pulsed in the background using the value most recently written using the write() method + + Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached. + Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four. + The sequence used to sieze timers is defined in timers.h + + The methods are: + + Servo - Class for manipulating servo motors connected to Arduino pins. + + attach(pin ) - Attaches a servo motor to an i/o pin. + attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds + default min is 544, max is 2400 + + write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds) + writeMicroseconds() - Sets the servo pulse width in microseconds + read() - Gets the last written servo pulse width as an angle between 0 and 180. + readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release) + attached() - Returns true if there is a servo attached. + detach() - Stops an attached servos from pulsing its i/o pin. + */ + +#ifndef Servo_h +#define Servo_h + +#include <inttypes.h> + +/* + * Defines for 16 bit timers used with Servo library + * + * If _useTimerX is defined then TimerX is a 16 bit timer on the curent board + * timer16_Sequence_t enumerates the sequence that the timers should be allocated + * _Nbr_16timers indicates how many 16 bit timers are available. + * + */ + +// Say which 16 bit timers can be used and in what order +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define _useTimer5 +#define _useTimer1 +#define _useTimer3 +#define _useTimer4 +typedef enum { _timer5, _timer1, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ; + +#elif defined(__AVR_ATmega32U4__) +#define _useTimer1 +typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ; + +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) +#define _useTimer3 +#define _useTimer1 +typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ; + +#elif defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__) +#define _useTimer3 +#define _useTimer1 +typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ; + +#else // everything else +#define _useTimer1 +typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ; +#endif + +#define Servo_VERSION 2 // software version of this library + +#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo +#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo +#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached +#define REFRESH_INTERVAL 20000 // minumim time to refresh servos in microseconds + +#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer +#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER) + +#define INVALID_SERVO 255 // flag indicating an invalid servo index + +typedef struct { + uint8_t nbr :6 ; // a pin number from 0 to 63 + uint8_t isActive :1 ; // true if this channel is enabled, pin not pulsed if false +} ServoPin_t ; + +typedef struct { + ServoPin_t Pin; + unsigned int ticks; +} servo_t; + +class Servo +{ +public: + Servo(); + uint8_t attach(int pin); // attach the given pin to the next free channel, sets pinMode, returns channel number or 0 if failure + uint8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes. + void detach(); + void write(int value); // if value is < 200 its treated as an angle, otherwise as pulse width in microseconds + void writeMicroseconds(int value); // Write pulse width in microseconds + int read(); // returns current pulse width as an angle between 0 and 180 degrees + int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release) + bool attached(); // return true if this servo is attached, otherwise false +private: + uint8_t servoIndex; // index into the channel data for this servo + int8_t min; // minimum is this value times 4 added to MIN_PULSE_WIDTH + int8_t max; // maximum is this value times 4 added to MAX_PULSE_WIDTH +}; + +#endif diff --git a/libraries/Servo/examples/Knob/Knob.ino b/libraries/Servo/examples/Knob/Knob.ino new file mode 100644 index 0000000..886e107 --- /dev/null +++ b/libraries/Servo/examples/Knob/Knob.ino @@ -0,0 +1,22 @@ +// Controlling a servo position using a potentiometer (variable resistor) +// by Michal Rinott <http://people.interaction-ivrea.it/m.rinott> + +#include <Servo.h> + +Servo myservo; // create servo object to control a servo + +int potpin = 0; // analog pin used to connect the potentiometer +int val; // variable to read the value from the analog pin + +void setup() +{ + myservo.attach(9); // attaches the servo on pin 9 to the servo object +} + +void loop() +{ + val = analogRead(potpin); // reads the value of the potentiometer (value between 0 and 1023) + val = map(val, 0, 1023, 0, 179); // scale it to use it with the servo (value between 0 and 180) + myservo.write(val); // sets the servo position according to the scaled value + delay(15); // waits for the servo to get there +} diff --git a/libraries/Servo/examples/Sweep/Sweep.ino b/libraries/Servo/examples/Sweep/Sweep.ino new file mode 100644 index 0000000..fb326e7 --- /dev/null +++ b/libraries/Servo/examples/Sweep/Sweep.ino @@ -0,0 +1,31 @@ +// Sweep +// by BARRAGAN <http://barraganstudio.com> +// This example code is in the public domain. + + +#include <Servo.h> + +Servo myservo; // create servo object to control a servo + // a maximum of eight servo objects can be created + +int pos = 0; // variable to store the servo position + +void setup() +{ + myservo.attach(9); // attaches the servo on pin 9 to the servo object +} + + +void loop() +{ + for(pos = 0; pos < 180; pos += 1) // goes from 0 degrees to 180 degrees + { // in steps of 1 degree + myservo.write(pos); // tell servo to go to position in variable 'pos' + delay(15); // waits 15ms for the servo to reach the position + } + for(pos = 180; pos>=1; pos-=1) // goes from 180 degrees to 0 degrees + { + myservo.write(pos); // tell servo to go to position in variable 'pos' + delay(15); // waits 15ms for the servo to reach the position + } +} diff --git a/libraries/Servo/keywords.txt b/libraries/Servo/keywords.txt new file mode 100644 index 0000000..ca5ba79 --- /dev/null +++ b/libraries/Servo/keywords.txt @@ -0,0 +1,24 @@ +####################################### +# Syntax Coloring Map Servo +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +Servo KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### +attach KEYWORD2 +detach KEYWORD2 +write KEYWORD2 +read KEYWORD2 +attached KEYWORD2 +writeMicroseconds KEYWORD2 +readMicroseconds KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### diff --git a/libraries/SoftwareSerial/SoftwareSerial.cpp b/libraries/SoftwareSerial/SoftwareSerial.cpp new file mode 100644 index 0000000..64496fe --- /dev/null +++ b/libraries/SoftwareSerial/SoftwareSerial.cpp @@ -0,0 +1,518 @@ +/*
+SoftwareSerial.cpp (formerly NewSoftSerial.cpp) -
+Multi-instance software serial library for Arduino/Wiring
+-- Interrupt-driven receive and other improvements by ladyada
+ (http://ladyada.net)
+-- Tuning, circular buffer, derivation from class Print/Stream,
+ multi-instance support, porting to 8MHz processors,
+ various optimizations, PROGMEM delay tables, inverse logic and
+ direct port writing by Mikal Hart (http://www.arduiniana.org)
+-- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
+-- 20MHz processor support by Garrett Mace (http://www.macetech.com)
+-- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+http://arduiniana.org.
+*/
+
+// When set, _DEBUG co-opts pins 11 and 13 for debugging with an
+// oscilloscope or logic analyzer. Beware: it also slightly modifies
+// the bit times, so don't rely on it too much at high baud rates
+#define _DEBUG 0
+#define _DEBUG_PIN1 11
+#define _DEBUG_PIN2 13
+//
+// Includes
+//
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include <Arduino.h>
+#include <SoftwareSerial.h>
+//
+// Lookup table
+//
+typedef struct _DELAY_TABLE
+{
+ long baud;
+ unsigned short rx_delay_centering;
+ unsigned short rx_delay_intrabit;
+ unsigned short rx_delay_stopbit;
+ unsigned short tx_delay;
+} DELAY_TABLE;
+
+#if F_CPU == 16000000
+
+static const DELAY_TABLE PROGMEM table[] =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 1, 17, 17, 12, },
+ { 57600, 10, 37, 37, 33, },
+ { 38400, 25, 57, 57, 54, },
+ { 31250, 31, 70, 70, 68, },
+ { 28800, 34, 77, 77, 74, },
+ { 19200, 54, 117, 117, 114, },
+ { 14400, 74, 156, 156, 153, },
+ { 9600, 114, 236, 236, 233, },
+ { 4800, 233, 474, 474, 471, },
+ { 2400, 471, 950, 950, 947, },
+ { 1200, 947, 1902, 1902, 1899, },
+ { 600, 1902, 3804, 3804, 3800, },
+ { 300, 3804, 7617, 7617, 7614, },
+};
+
+const int XMIT_START_ADJUSTMENT = 5;
+
+#elif F_CPU == 8000000
+
+static const DELAY_TABLE table[] PROGMEM =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 1, 5, 5, 3, },
+ { 57600, 1, 15, 15, 13, },
+ { 38400, 2, 25, 26, 23, },
+ { 31250, 7, 32, 33, 29, },
+ { 28800, 11, 35, 35, 32, },
+ { 19200, 20, 55, 55, 52, },
+ { 14400, 30, 75, 75, 72, },
+ { 9600, 50, 114, 114, 112, },
+ { 4800, 110, 233, 233, 230, },
+ { 2400, 229, 472, 472, 469, },
+ { 1200, 467, 948, 948, 945, },
+ { 600, 948, 1895, 1895, 1890, },
+ { 300, 1895, 3805, 3805, 3802, },
+};
+
+const int XMIT_START_ADJUSTMENT = 4;
+
+#elif F_CPU == 20000000
+
+// 20MHz support courtesy of the good people at macegr.com.
+// Thanks, Garrett!
+
+static const DELAY_TABLE PROGMEM table[] =
+{
+ // baud rxcenter rxintra rxstop tx
+ { 115200, 3, 21, 21, 18, },
+ { 57600, 20, 43, 43, 41, },
+ { 38400, 37, 73, 73, 70, },
+ { 31250, 45, 89, 89, 88, },
+ { 28800, 46, 98, 98, 95, },
+ { 19200, 71, 148, 148, 145, },
+ { 14400, 96, 197, 197, 194, },
+ { 9600, 146, 297, 297, 294, },
+ { 4800, 296, 595, 595, 592, },
+ { 2400, 592, 1189, 1189, 1186, },
+ { 1200, 1187, 2379, 2379, 2376, },
+ { 600, 2379, 4759, 4759, 4755, },
+ { 300, 4759, 9523, 9523, 9520, },
+};
+
+const int XMIT_START_ADJUSTMENT = 6;
+
+#else
+
+#error This version of SoftwareSerial supports only 20, 16 and 8MHz processors
+
+#endif
+
+//
+// Statics
+//
+SoftwareSerial *SoftwareSerial::active_object = 0;
+char SoftwareSerial::_receive_buffer[_SS_MAX_RX_BUFF];
+volatile uint8_t SoftwareSerial::_receive_buffer_tail = 0;
+volatile uint8_t SoftwareSerial::_receive_buffer_head = 0;
+
+//
+// Debugging
+//
+// This function generates a brief pulse
+// for debugging or measuring on an oscilloscope.
+inline void DebugPulse(uint8_t pin, uint8_t count)
+{
+#if _DEBUG
+ volatile uint8_t *pport = portOutputRegister(digitalPinToPort(pin));
+
+ uint8_t val = *pport;
+ while (count--)
+ {
+ *pport = val | digitalPinToBitMask(pin);
+ *pport = val;
+ }
+#endif
+}
+
+//
+// Private methods
+//
+
+/* static */
+inline void SoftwareSerial::tunedDelay(uint16_t delay) {
+ uint8_t tmp=0;
+
+ asm volatile("sbiw %0, 0x01 \n\t"
+ "ldi %1, 0xFF \n\t"
+ "cpi %A0, 0xFF \n\t"
+ "cpc %B0, %1 \n\t"
+ "brne .-10 \n\t"
+ : "+r" (delay), "+a" (tmp)
+ : "0" (delay)
+ );
+}
+
+// This function sets the current object as the "listening"
+// one and returns true if it replaces another
+bool SoftwareSerial::listen()
+{
+ if (active_object != this)
+ {
+ _buffer_overflow = false;
+ uint8_t oldSREG = SREG;
+ cli();
+ _receive_buffer_head = _receive_buffer_tail = 0;
+ active_object = this;
+ SREG = oldSREG;
+ return true;
+ }
+
+ return false;
+}
+
+//
+// The receive routine called by the interrupt handler
+//
+void SoftwareSerial::recv()
+{
+
+#if GCC_VERSION < 40302
+// Work-around for avr-gcc 4.3.0 OSX version bug
+// Preserve the registers that the compiler misses
+// (courtesy of Arduino forum user *etracer*)
+ asm volatile(
+ "push r18 \n\t"
+ "push r19 \n\t"
+ "push r20 \n\t"
+ "push r21 \n\t"
+ "push r22 \n\t"
+ "push r23 \n\t"
+ "push r26 \n\t"
+ "push r27 \n\t"
+ ::);
+#endif
+
+ uint8_t d = 0;
+
+ // If RX line is high, then we don't see any start bit
+ // so interrupt is probably not for us
+ if (_inverse_logic ? rx_pin_read() : !rx_pin_read())
+ {
+ // Wait approximately 1/2 of a bit width to "center" the sample
+ tunedDelay(_rx_delay_centering);
+ DebugPulse(_DEBUG_PIN2, 1);
+
+ // Read each of the 8 bits
+ for (uint8_t i=0x1; i; i <<= 1)
+ {
+ tunedDelay(_rx_delay_intrabit);
+ DebugPulse(_DEBUG_PIN2, 1);
+ uint8_t noti = ~i;
+ if (rx_pin_read())
+ d |= i;
+ else // else clause added to ensure function timing is ~balanced
+ d &= noti;
+ }
+
+ // skip the stop bit
+ tunedDelay(_rx_delay_stopbit);
+ DebugPulse(_DEBUG_PIN2, 1);
+
+ if (_inverse_logic)
+ d = ~d;
+
+ // if buffer full, set the overflow flag and return
+ if ((_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF != _receive_buffer_head)
+ {
+ // save new data in buffer: tail points to where byte goes
+ _receive_buffer[_receive_buffer_tail] = d; // save new byte
+ _receive_buffer_tail = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF;
+ }
+ else
+ {
+#if _DEBUG // for scope: pulse pin as overflow indictator
+ DebugPulse(_DEBUG_PIN1, 1);
+#endif
+ _buffer_overflow = true;
+ }
+ }
+
+#if GCC_VERSION < 40302
+// Work-around for avr-gcc 4.3.0 OSX version bug
+// Restore the registers that the compiler misses
+ asm volatile(
+ "pop r27 \n\t"
+ "pop r26 \n\t"
+ "pop r23 \n\t"
+ "pop r22 \n\t"
+ "pop r21 \n\t"
+ "pop r20 \n\t"
+ "pop r19 \n\t"
+ "pop r18 \n\t"
+ ::);
+#endif
+}
+
+void SoftwareSerial::tx_pin_write(uint8_t pin_state)
+{
+ if (pin_state == LOW)
+ *_transmitPortRegister &= ~_transmitBitMask;
+ else
+ *_transmitPortRegister |= _transmitBitMask;
+}
+
+uint8_t SoftwareSerial::rx_pin_read()
+{
+ return *_receivePortRegister & _receiveBitMask;
+}
+
+//
+// Interrupt handling
+//
+
+/* static */
+inline void SoftwareSerial::handle_interrupt()
+{
+ if (active_object)
+ {
+ active_object->recv();
+ }
+}
+
+#if defined(PCINT0_vect)
+ISR(PCINT0_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT1_vect)
+ISR(PCINT1_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT2_vect)
+ISR(PCINT2_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+#if defined(PCINT3_vect)
+ISR(PCINT3_vect)
+{
+ SoftwareSerial::handle_interrupt();
+}
+#endif
+
+//
+// Constructor
+//
+SoftwareSerial::SoftwareSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_logic /* = false */) :
+ _rx_delay_centering(0),
+ _rx_delay_intrabit(0),
+ _rx_delay_stopbit(0),
+ _tx_delay(0),
+ _buffer_overflow(false),
+ _inverse_logic(inverse_logic)
+{
+ setTX(transmitPin);
+ setRX(receivePin);
+}
+
+//
+// Destructor
+//
+SoftwareSerial::~SoftwareSerial()
+{
+ end();
+}
+
+void SoftwareSerial::setTX(uint8_t tx)
+{
+ pinMode(tx, OUTPUT);
+ digitalWrite(tx, HIGH);
+ _transmitBitMask = digitalPinToBitMask(tx);
+ uint8_t port = digitalPinToPort(tx);
+ _transmitPortRegister = portOutputRegister(port);
+}
+
+void SoftwareSerial::setRX(uint8_t rx)
+{
+ pinMode(rx, INPUT);
+ if (!_inverse_logic)
+ digitalWrite(rx, HIGH); // pullup for normal logic!
+ _receivePin = rx;
+ _receiveBitMask = digitalPinToBitMask(rx);
+ uint8_t port = digitalPinToPort(rx);
+ _receivePortRegister = portInputRegister(port);
+}
+
+//
+// Public methods
+//
+
+void SoftwareSerial::begin(long speed)
+{
+ _rx_delay_centering = _rx_delay_intrabit = _rx_delay_stopbit = _tx_delay = 0;
+
+ for (unsigned i=0; i<sizeof(table)/sizeof(table[0]); ++i)
+ {
+ long baud = pgm_read_dword(&table[i].baud);
+ if (baud == speed)
+ {
+ _rx_delay_centering = pgm_read_word(&table[i].rx_delay_centering);
+ _rx_delay_intrabit = pgm_read_word(&table[i].rx_delay_intrabit);
+ _rx_delay_stopbit = pgm_read_word(&table[i].rx_delay_stopbit);
+ _tx_delay = pgm_read_word(&table[i].tx_delay);
+ break;
+ }
+ }
+
+ // Set up RX interrupts, but only if we have a valid RX baud rate
+ if (_rx_delay_stopbit)
+ {
+ if (digitalPinToPCICR(_receivePin))
+ {
+ *digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin));
+ *digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin));
+ }
+ tunedDelay(_tx_delay); // if we were low this establishes the end
+ }
+
+#if _DEBUG
+ pinMode(_DEBUG_PIN1, OUTPUT);
+ pinMode(_DEBUG_PIN2, OUTPUT);
+#endif
+
+ listen();
+}
+
+void SoftwareSerial::end()
+{
+ if (digitalPinToPCMSK(_receivePin))
+ *digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin));
+}
+
+
+// Read data from buffer
+int SoftwareSerial::read()
+{
+ if (!isListening())
+ return -1;
+
+ // Empty buffer?
+ if (_receive_buffer_head == _receive_buffer_tail)
+ return -1;
+
+ // Read from "head"
+ uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte
+ _receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF;
+ return d;
+}
+
+int SoftwareSerial::available()
+{
+ if (!isListening())
+ return 0;
+
+ return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF;
+}
+
+size_t SoftwareSerial::write(uint8_t b)
+{
+ if (_tx_delay == 0) {
+ setWriteError();
+ return 0;
+ }
+
+ uint8_t oldSREG = SREG;
+ cli(); // turn off interrupts for a clean txmit
+
+ // Write the start bit
+ tx_pin_write(_inverse_logic ? HIGH : LOW);
+ tunedDelay(_tx_delay + XMIT_START_ADJUSTMENT);
+
+ // Write each of the 8 bits
+ if (_inverse_logic)
+ {
+ for (byte mask = 0x01; mask; mask <<= 1)
+ {
+ if (b & mask) // choose bit
+ tx_pin_write(LOW); // send 1
+ else
+ tx_pin_write(HIGH); // send 0
+
+ tunedDelay(_tx_delay);
+ }
+
+ tx_pin_write(LOW); // restore pin to natural state
+ }
+ else
+ {
+ for (byte mask = 0x01; mask; mask <<= 1)
+ {
+ if (b & mask) // choose bit
+ tx_pin_write(HIGH); // send 1
+ else
+ tx_pin_write(LOW); // send 0
+
+ tunedDelay(_tx_delay);
+ }
+
+ tx_pin_write(HIGH); // restore pin to natural state
+ }
+
+ SREG = oldSREG; // turn interrupts back on
+ tunedDelay(_tx_delay);
+
+ return 1;
+}
+
+void SoftwareSerial::flush()
+{
+ if (!isListening())
+ return;
+
+ uint8_t oldSREG = SREG;
+ cli();
+ _receive_buffer_head = _receive_buffer_tail = 0;
+ SREG = oldSREG;
+}
+
+int SoftwareSerial::peek()
+{
+ if (!isListening())
+ return -1;
+
+ // Empty buffer?
+ if (_receive_buffer_head == _receive_buffer_tail)
+ return -1;
+
+ // Read from "head"
+ return _receive_buffer[_receive_buffer_head];
+}
diff --git a/libraries/SoftwareSerial/SoftwareSerial.h b/libraries/SoftwareSerial/SoftwareSerial.h new file mode 100644 index 0000000..a6a60b5 --- /dev/null +++ b/libraries/SoftwareSerial/SoftwareSerial.h @@ -0,0 +1,112 @@ +/*
+SoftwareSerial.h (formerly NewSoftSerial.h) -
+Multi-instance software serial library for Arduino/Wiring
+-- Interrupt-driven receive and other improvements by ladyada
+ (http://ladyada.net)
+-- Tuning, circular buffer, derivation from class Print/Stream,
+ multi-instance support, porting to 8MHz processors,
+ various optimizations, PROGMEM delay tables, inverse logic and
+ direct port writing by Mikal Hart (http://www.arduiniana.org)
+-- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)
+-- 20MHz processor support by Garrett Mace (http://www.macetech.com)
+-- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+The latest version of this library can always be found at
+http://arduiniana.org.
+*/
+
+#ifndef SoftwareSerial_h
+#define SoftwareSerial_h
+
+#include <inttypes.h>
+#include <Stream.h>
+
+/******************************************************************************
+* Definitions
+******************************************************************************/
+
+#define _SS_MAX_RX_BUFF 64 // RX buffer size
+#ifndef GCC_VERSION
+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#endif
+
+class SoftwareSerial : public Stream
+{
+private:
+ // per object data
+ uint8_t _receivePin;
+ uint8_t _receiveBitMask;
+ volatile uint8_t *_receivePortRegister;
+ uint8_t _transmitBitMask;
+ volatile uint8_t *_transmitPortRegister;
+
+ uint16_t _rx_delay_centering;
+ uint16_t _rx_delay_intrabit;
+ uint16_t _rx_delay_stopbit;
+ uint16_t _tx_delay;
+
+ uint16_t _buffer_overflow:1;
+ uint16_t _inverse_logic:1;
+
+ // static data
+ static char _receive_buffer[_SS_MAX_RX_BUFF];
+ static volatile uint8_t _receive_buffer_tail;
+ static volatile uint8_t _receive_buffer_head;
+ static SoftwareSerial *active_object;
+
+ // private methods
+ void recv();
+ uint8_t rx_pin_read();
+ void tx_pin_write(uint8_t pin_state);
+ void setTX(uint8_t transmitPin);
+ void setRX(uint8_t receivePin);
+
+ // private static method for timing
+ static inline void tunedDelay(uint16_t delay);
+
+public:
+ // public methods
+ SoftwareSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_logic = false);
+ ~SoftwareSerial();
+ void begin(long speed);
+ bool listen();
+ void end();
+ bool isListening() { return this == active_object; }
+ bool overflow() { bool ret = _buffer_overflow; _buffer_overflow = false; return ret; }
+ int peek();
+
+ virtual size_t write(uint8_t byte);
+ virtual int read();
+ virtual int available();
+ virtual void flush();
+
+ using Print::write;
+
+ // public only for easy access by interrupt handlers
+ static inline void handle_interrupt();
+};
+
+// Arduino 0012 workaround
+#undef int
+#undef char
+#undef long
+#undef byte
+#undef float
+#undef abs
+#undef round
+
+#endif
diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino new file mode 100644 index 0000000..6101bb1 --- /dev/null +++ b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino @@ -0,0 +1,55 @@ +/* + Software serial multple serial test + + Receives from the hardware serial, sends to software serial. + Receives from software serial, sends to hardware serial. + + The circuit: + * RX is digital pin 10 (connect to TX of other device) + * TX is digital pin 11 (connect to RX of other device) + + Note: + Not all pins on the Mega and Mega 2560 support change interrupts, + so only the following can be used for RX: + 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 + + Not all pins on the Leonardo support change interrupts, + so only the following can be used for RX: + 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI). + + created back in the mists of time + modified 25 May 2012 + by Tom Igoe + based on Mikal Hart's example + + This example code is in the public domain. + + */ +#include <SoftwareSerial.h> + +SoftwareSerial mySerial(10, 11); // RX, TX + +void setup() +{ + // Open serial communications and wait for port to open: + Serial.begin(57600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + Serial.println("Goodnight moon!"); + + // set the data rate for the SoftwareSerial port + mySerial.begin(4800); + mySerial.println("Hello, world?"); +} + +void loop() // run over and over +{ + if (mySerial.available()) + Serial.write(mySerial.read()); + if (Serial.available()) + mySerial.write(Serial.read()); +} + diff --git a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino new file mode 100644 index 0000000..d607ee6 --- /dev/null +++ b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino @@ -0,0 +1,93 @@ +/* + Software serial multple serial test + + Receives from the two software serial ports, + sends to the hardware serial port. + + In order to listen on a software port, you call port.listen(). + When using two software serial ports, you have to switch ports + by listen()ing on each one in turn. Pick a logical time to switch + ports, like the end of an expected transmission, or when the + buffer is empty. This example switches ports when there is nothing + more to read from a port + + The circuit: + Two devices which communicate serially are needed. + * First serial device's TX attached to digital pin 2, RX to pin 3 + * Second serial device's TX attached to digital pin 4, RX to pin 5 + + Note: + Not all pins on the Mega and Mega 2560 support change interrupts, + so only the following can be used for RX: + 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 + + Not all pins on the Leonardo support change interrupts, + so only the following can be used for RX: + 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI). + + created 18 Apr. 2011 + modified 25 May 2012 + by Tom Igoe + based on Mikal Hart's twoPortRXExample + + This example code is in the public domain. + + */ + +#include <SoftwareSerial.h> +// software serial #1: TX = digital pin 10, RX = digital pin 11 +SoftwareSerial portOne(10,11); + +// software serial #2: TX = digital pin 8, RX = digital pin 9 +// on the Mega, use other pins instead, since 8 and 9 don't work on the Mega +SoftwareSerial portTwo(8,9); + +void setup() +{ + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + + // Start each software serial port + portOne.begin(9600); + portTwo.begin(9600); +} + +void loop() +{ + // By default, the last intialized port is listening. + // when you want to listen on a port, explicitly select it: + portOne.listen(); + Serial.println("Data from port one:"); + // while there is data coming in, read it + // and send to the hardware serial port: + while (portOne.available() > 0) { + char inByte = portOne.read(); + Serial.write(inByte); + } + + // blank line to separate data from the two ports: + Serial.println(); + + // Now listen on the second port + portTwo.listen(); + // while there is data coming in, read it + // and send to the hardware serial port: + Serial.println("Data from port two:"); + while (portTwo.available() > 0) { + char inByte = portTwo.read(); + Serial.write(inByte); + } + + // blank line to separate data from the two ports: + Serial.println(); +} + + + + + + diff --git a/libraries/SoftwareSerial/keywords.txt b/libraries/SoftwareSerial/keywords.txt new file mode 100644 index 0000000..90d4c15 --- /dev/null +++ b/libraries/SoftwareSerial/keywords.txt @@ -0,0 +1,27 @@ +####################################### +# Syntax Coloring Map for NewSoftSerial +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +NewSoftSerial KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +end KEYWORD2 +read KEYWORD2 +available KEYWORD2 +isListening KEYWORD2 +overflow KEYWORD2 +flush KEYWORD2 +listen KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/Stepper/Stepper.cpp b/libraries/Stepper/Stepper.cpp new file mode 100644 index 0000000..5d6b5e5 --- /dev/null +++ b/libraries/Stepper/Stepper.cpp @@ -0,0 +1,220 @@ +/* + Stepper.cpp - - Stepper library for Wiring/Arduino - Version 0.4 + + Original library (0.1) by Tom Igoe. + Two-wire modifications (0.2) by Sebastian Gassner + Combination version (0.3) by Tom Igoe and David Mellis + Bug fix for four-wire (0.4) by Tom Igoe, bug fix from Noah Shibley + + Drives a unipolar or bipolar stepper motor using 2 wires or 4 wires + + When wiring multiple stepper motors to a microcontroller, + you quickly run out of output pins, with each motor requiring 4 connections. + + By making use of the fact that at any time two of the four motor + coils are the inverse of the other two, the number of + control connections can be reduced from 4 to 2. + + A slightly modified circuit around a Darlington transistor array or an L293 H-bridge + connects to only 2 microcontroler pins, inverts the signals received, + and delivers the 4 (2 plus 2 inverted ones) output signals required + for driving a stepper motor. + + The sequence of control signals for 4 control wires is as follows: + + Step C0 C1 C2 C3 + 1 1 0 1 0 + 2 0 1 1 0 + 3 0 1 0 1 + 4 1 0 0 1 + + The sequence of controls signals for 2 control wires is as follows + (columns C1 and C2 from above): + + Step C0 C1 + 1 0 1 + 2 1 1 + 3 1 0 + 4 0 0 + + The circuits can be found at + +http://www.arduino.cc/en/Tutorial/Stepper + + + */ + + +#include "Arduino.h" +#include "Stepper.h" + +/* + * two-wire constructor. + * Sets which wires should control the motor. + */ +Stepper::Stepper(int number_of_steps, int motor_pin_1, int motor_pin_2) +{ + this->step_number = 0; // which step the motor is on + this->speed = 0; // the motor speed, in revolutions per minute + this->direction = 0; // motor direction + this->last_step_time = 0; // time stamp in ms of the last step taken + this->number_of_steps = number_of_steps; // total number of steps for this motor + + // Arduino pins for the motor control connection: + this->motor_pin_1 = motor_pin_1; + this->motor_pin_2 = motor_pin_2; + + // setup the pins on the microcontroller: + pinMode(this->motor_pin_1, OUTPUT); + pinMode(this->motor_pin_2, OUTPUT); + + // When there are only 2 pins, set the other two to 0: + this->motor_pin_3 = 0; + this->motor_pin_4 = 0; + + // pin_count is used by the stepMotor() method: + this->pin_count = 2; +} + + +/* + * constructor for four-pin version + * Sets which wires should control the motor. + */ + +Stepper::Stepper(int number_of_steps, int motor_pin_1, int motor_pin_2, int motor_pin_3, int motor_pin_4) +{ + this->step_number = 0; // which step the motor is on + this->speed = 0; // the motor speed, in revolutions per minute + this->direction = 0; // motor direction + this->last_step_time = 0; // time stamp in ms of the last step taken + this->number_of_steps = number_of_steps; // total number of steps for this motor + + // Arduino pins for the motor control connection: + this->motor_pin_1 = motor_pin_1; + this->motor_pin_2 = motor_pin_2; + this->motor_pin_3 = motor_pin_3; + this->motor_pin_4 = motor_pin_4; + + // setup the pins on the microcontroller: + pinMode(this->motor_pin_1, OUTPUT); + pinMode(this->motor_pin_2, OUTPUT); + pinMode(this->motor_pin_3, OUTPUT); + pinMode(this->motor_pin_4, OUTPUT); + + // pin_count is used by the stepMotor() method: + this->pin_count = 4; +} + +/* + Sets the speed in revs per minute + +*/ +void Stepper::setSpeed(long whatSpeed) +{ + this->step_delay = 60L * 1000L / this->number_of_steps / whatSpeed; +} + +/* + Moves the motor steps_to_move steps. If the number is negative, + the motor moves in the reverse direction. + */ +void Stepper::step(int steps_to_move) +{ + int steps_left = abs(steps_to_move); // how many steps to take + + // determine direction based on whether steps_to_mode is + or -: + if (steps_to_move > 0) {this->direction = 1;} + if (steps_to_move < 0) {this->direction = 0;} + + + // decrement the number of steps, moving one step each time: + while(steps_left > 0) { + // move only if the appropriate delay has passed: + if (millis() - this->last_step_time >= this->step_delay) { + // get the timeStamp of when you stepped: + this->last_step_time = millis(); + // increment or decrement the step number, + // depending on direction: + if (this->direction == 1) { + this->step_number++; + if (this->step_number == this->number_of_steps) { + this->step_number = 0; + } + } + else { + if (this->step_number == 0) { + this->step_number = this->number_of_steps; + } + this->step_number--; + } + // decrement the steps left: + steps_left--; + // step the motor to step number 0, 1, 2, or 3: + stepMotor(this->step_number % 4); + } + } +} + +/* + * Moves the motor forward or backwards. + */ +void Stepper::stepMotor(int thisStep) +{ + if (this->pin_count == 2) { + switch (thisStep) { + case 0: /* 01 */ + digitalWrite(motor_pin_1, LOW); + digitalWrite(motor_pin_2, HIGH); + break; + case 1: /* 11 */ + digitalWrite(motor_pin_1, HIGH); + digitalWrite(motor_pin_2, HIGH); + break; + case 2: /* 10 */ + digitalWrite(motor_pin_1, HIGH); + digitalWrite(motor_pin_2, LOW); + break; + case 3: /* 00 */ + digitalWrite(motor_pin_1, LOW); + digitalWrite(motor_pin_2, LOW); + break; + } + } + if (this->pin_count == 4) { + switch (thisStep) { + case 0: // 1010 + digitalWrite(motor_pin_1, HIGH); + digitalWrite(motor_pin_2, LOW); + digitalWrite(motor_pin_3, HIGH); + digitalWrite(motor_pin_4, LOW); + break; + case 1: // 0110 + digitalWrite(motor_pin_1, LOW); + digitalWrite(motor_pin_2, HIGH); + digitalWrite(motor_pin_3, HIGH); + digitalWrite(motor_pin_4, LOW); + break; + case 2: //0101 + digitalWrite(motor_pin_1, LOW); + digitalWrite(motor_pin_2, HIGH); + digitalWrite(motor_pin_3, LOW); + digitalWrite(motor_pin_4, HIGH); + break; + case 3: //1001 + digitalWrite(motor_pin_1, HIGH); + digitalWrite(motor_pin_2, LOW); + digitalWrite(motor_pin_3, LOW); + digitalWrite(motor_pin_4, HIGH); + break; + } + } +} + +/* + version() returns the version of the library: +*/ +int Stepper::version(void) +{ + return 4; +} diff --git a/libraries/Stepper/Stepper.h b/libraries/Stepper/Stepper.h new file mode 100644 index 0000000..4094aee --- /dev/null +++ b/libraries/Stepper/Stepper.h @@ -0,0 +1,83 @@ +/* + Stepper.h - - Stepper library for Wiring/Arduino - Version 0.4 + + Original library (0.1) by Tom Igoe. + Two-wire modifications (0.2) by Sebastian Gassner + Combination version (0.3) by Tom Igoe and David Mellis + Bug fix for four-wire (0.4) by Tom Igoe, bug fix from Noah Shibley + + Drives a unipolar or bipolar stepper motor using 2 wires or 4 wires + + When wiring multiple stepper motors to a microcontroller, + you quickly run out of output pins, with each motor requiring 4 connections. + + By making use of the fact that at any time two of the four motor + coils are the inverse of the other two, the number of + control connections can be reduced from 4 to 2. + + A slightly modified circuit around a Darlington transistor array or an L293 H-bridge + connects to only 2 microcontroler pins, inverts the signals received, + and delivers the 4 (2 plus 2 inverted ones) output signals required + for driving a stepper motor. + + The sequence of control signals for 4 control wires is as follows: + + Step C0 C1 C2 C3 + 1 1 0 1 0 + 2 0 1 1 0 + 3 0 1 0 1 + 4 1 0 0 1 + + The sequence of controls signals for 2 control wires is as follows + (columns C1 and C2 from above): + + Step C0 C1 + 1 0 1 + 2 1 1 + 3 1 0 + 4 0 0 + + The circuits can be found at + http://www.arduino.cc/en/Tutorial/Stepper +*/ + +// ensure this library description is only included once +#ifndef Stepper_h +#define Stepper_h + +// library interface description +class Stepper { + public: + // constructors: + Stepper(int number_of_steps, int motor_pin_1, int motor_pin_2); + Stepper(int number_of_steps, int motor_pin_1, int motor_pin_2, int motor_pin_3, int motor_pin_4); + + // speed setter method: + void setSpeed(long whatSpeed); + + // mover method: + void step(int number_of_steps); + + int version(void); + + private: + void stepMotor(int this_step); + + int direction; // Direction of rotation + int speed; // Speed in RPMs + unsigned long step_delay; // delay between steps, in ms, based on speed + int number_of_steps; // total number of steps this motor can take + int pin_count; // whether you're driving the motor with 2 or 4 pins + int step_number; // which step the motor is on + + // motor pin numbers: + int motor_pin_1; + int motor_pin_2; + int motor_pin_3; + int motor_pin_4; + + long last_step_time; // time stamp in ms of when the last step was taken +}; + +#endif + diff --git a/libraries/Stepper/examples/MotorKnob/MotorKnob.ino b/libraries/Stepper/examples/MotorKnob/MotorKnob.ino new file mode 100644 index 0000000..d428186 --- /dev/null +++ b/libraries/Stepper/examples/MotorKnob/MotorKnob.ino @@ -0,0 +1,41 @@ +/* + * MotorKnob + * + * A stepper motor follows the turns of a potentiometer + * (or other sensor) on analog input 0. + * + * http://www.arduino.cc/en/Reference/Stepper + * This example code is in the public domain. + */ + +#include <Stepper.h> + +// change this to the number of steps on your motor +#define STEPS 100 + +// create an instance of the stepper class, specifying +// the number of steps of the motor and the pins it's +// attached to +Stepper stepper(STEPS, 8, 9, 10, 11); + +// the previous reading from the analog input +int previous = 0; + +void setup() +{ + // set the speed of the motor to 30 RPMs + stepper.setSpeed(30); +} + +void loop() +{ + // get the sensor value + int val = analogRead(0); + + // move a number of steps equal to the change in the + // sensor reading + stepper.step(val - previous); + + // remember the previous value of the sensor + previous = val; +}
\ No newline at end of file diff --git a/libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino b/libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino new file mode 100644 index 0000000..2dbb57d --- /dev/null +++ b/libraries/Stepper/examples/stepper_oneRevolution/stepper_oneRevolution.ino @@ -0,0 +1,44 @@ + +/* + Stepper Motor Control - one revolution + + This program drives a unipolar or bipolar stepper motor. + The motor is attached to digital pins 8 - 11 of the Arduino. + + The motor should revolve one revolution in one direction, then + one revolution in the other direction. + + + Created 11 Mar. 2007 + Modified 30 Nov. 2009 + by Tom Igoe + + */ + +#include <Stepper.h> + +const int stepsPerRevolution = 200; // change this to fit the number of steps per revolution + // for your motor + +// initialize the stepper library on pins 8 through 11: +Stepper myStepper(stepsPerRevolution, 8,9,10,11); + +void setup() { + // set the speed at 60 rpm: + myStepper.setSpeed(60); + // initialize the serial port: + Serial.begin(9600); +} + +void loop() { + // step one revolution in one direction: + Serial.println("clockwise"); + myStepper.step(stepsPerRevolution); + delay(500); + + // step one revolution in the other direction: + Serial.println("counterclockwise"); + myStepper.step(-stepsPerRevolution); + delay(500); +} + diff --git a/libraries/Stepper/examples/stepper_oneStepAtATime/stepper_oneStepAtATime.ino b/libraries/Stepper/examples/stepper_oneStepAtATime/stepper_oneStepAtATime.ino new file mode 100644 index 0000000..36d3299 --- /dev/null +++ b/libraries/Stepper/examples/stepper_oneStepAtATime/stepper_oneStepAtATime.ino @@ -0,0 +1,44 @@ + +/* + Stepper Motor Control - one step at a time + + This program drives a unipolar or bipolar stepper motor. + The motor is attached to digital pins 8 - 11 of the Arduino. + + The motor will step one step at a time, very slowly. You can use this to + test that you've got the four wires of your stepper wired to the correct + pins. If wired correctly, all steps should be in the same direction. + + Use this also to count the number of steps per revolution of your motor, + if you don't know it. Then plug that number into the oneRevolution + example to see if you got it right. + + Created 30 Nov. 2009 + by Tom Igoe + + */ + +#include <Stepper.h> + +const int stepsPerRevolution = 200; // change this to fit the number of steps per revolution + // for your motor + +// initialize the stepper library on pins 8 through 11: +Stepper myStepper(stepsPerRevolution, 8,9,10,11); + +int stepCount = 0; // number of steps the motor has taken + +void setup() { + // initialize the serial port: + Serial.begin(9600); +} + +void loop() { + // step one step: + myStepper.step(1); + Serial.print("steps:" ); + Serial.println(stepCount); + stepCount++; + delay(500); +} + diff --git a/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino b/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino new file mode 100644 index 0000000..1a67a55 --- /dev/null +++ b/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino @@ -0,0 +1,48 @@ + +/* + Stepper Motor Control - speed control + + This program drives a unipolar or bipolar stepper motor. + The motor is attached to digital pins 8 - 11 of the Arduino. + A potentiometer is connected to analog input 0. + + The motor will rotate in a clockwise direction. The higher the potentiometer value, + the faster the motor speed. Because setSpeed() sets the delay between steps, + you may notice the motor is less responsive to changes in the sensor value at + low speeds. + + Created 30 Nov. 2009 + Modified 28 Oct 2010 + by Tom Igoe + + */ + +#include <Stepper.h> + +const int stepsPerRevolution = 200; // change this to fit the number of steps per revolution +// for your motor + + +// initialize the stepper library on pins 8 through 11: +Stepper myStepper(stepsPerRevolution, 8,9,10,11); + +int stepCount = 0; // number of steps the motor has taken + +void setup() { + // nothing to do inside the setup +} + +void loop() { + // read the sensor value: + int sensorReading = analogRead(A0); + // map it to a range from 0 to 100: + int motorSpeed = map(sensorReading, 0, 1023, 0, 100); + // set the motor speed: + if (motorSpeed > 0) { + myStepper.setSpeed(motorSpeed); + // step 1/100 of a revolution: + myStepper.step(stepsPerRevolution/100); + } +} + + diff --git a/libraries/Stepper/keywords.txt b/libraries/Stepper/keywords.txt new file mode 100644 index 0000000..19a0fad --- /dev/null +++ b/libraries/Stepper/keywords.txt @@ -0,0 +1,28 @@ +####################################### +# Syntax Coloring Map For Test +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +Stepper KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +step KEYWORD2 +setSpeed KEYWORD2 +version KEYWORD2 + +###################################### +# Instances (KEYWORD2) +####################################### +direction KEYWORD2 +speed KEYWORD2 + + +####################################### +# Constants (LITERAL1) +####################################### diff --git a/libraries/WiFi/WiFi.cpp b/libraries/WiFi/WiFi.cpp new file mode 100644 index 0000000..f209280 --- /dev/null +++ b/libraries/WiFi/WiFi.cpp @@ -0,0 +1,231 @@ +#include "wifi_drv.h" +#include "WiFi.h" + +extern "C" { + #include "utility/wl_definitions.h" + #include "utility/wl_types.h" + #include "debug.h" +} + +// XXX: don't make assumptions about the value of MAX_SOCK_NUM. +int16_t WiFiClass::_state[MAX_SOCK_NUM] = { NA_STATE, NA_STATE, NA_STATE, NA_STATE }; +uint16_t WiFiClass::_server_port[MAX_SOCK_NUM] = { 0, 0, 0, 0 }; + +WiFiClass::WiFiClass() +{ + // Driver initialization + init(); +} + +void WiFiClass::init() +{ + WiFiDrv::wifiDriverInit(); +} + +uint8_t WiFiClass::getSocket() +{ + for (uint8_t i = 0; i < MAX_SOCK_NUM; ++i) + { + if (WiFiClass::_server_port[i] == 0) + { + return i; + } + } + return NO_SOCKET_AVAIL; +} + +char* WiFiClass::firmwareVersion() +{ + return WiFiDrv::getFwVersion(); +} + +int WiFiClass::begin(char* ssid) +{ + uint8_t status = WL_IDLE_STATUS; + uint8_t attempts = WL_MAX_ATTEMPT_CONNECTION; + + if (WiFiDrv::wifiSetNetwork(ssid, strlen(ssid)) != WL_FAILURE) + { + do + { + delay(WL_DELAY_START_CONNECTION); + status = WiFiDrv::getConnectionStatus(); + } + while ((( status == WL_IDLE_STATUS)||(status == WL_SCAN_COMPLETED))&&(--attempts>0)); + }else + { + status = WL_CONNECT_FAILED; + } + return status; +} + +int WiFiClass::begin(char* ssid, uint8_t key_idx, const char *key) +{ + uint8_t status = WL_IDLE_STATUS; + uint8_t attempts = WL_MAX_ATTEMPT_CONNECTION; + + // set encryption key + if (WiFiDrv::wifiSetKey(ssid, strlen(ssid), key_idx, key, strlen(key)) != WL_FAILURE) + { + do + { + delay(WL_DELAY_START_CONNECTION); + status = WiFiDrv::getConnectionStatus(); + }while ((( status == WL_IDLE_STATUS)||(status == WL_SCAN_COMPLETED))&&(--attempts>0)); + }else{ + status = WL_CONNECT_FAILED; + } + return status; +} + +int WiFiClass::begin(char* ssid, const char *passphrase) +{ + uint8_t status = WL_IDLE_STATUS; + uint8_t attempts = WL_MAX_ATTEMPT_CONNECTION; + + // set passphrase + if (WiFiDrv::wifiSetPassphrase(ssid, strlen(ssid), passphrase, strlen(passphrase))!= WL_FAILURE) + { + do + { + delay(WL_DELAY_START_CONNECTION); + status = WiFiDrv::getConnectionStatus(); + } + while ((( status == WL_IDLE_STATUS)||(status == WL_SCAN_COMPLETED))&&(--attempts>0)); + }else{ + status = WL_CONNECT_FAILED; + } + return status; +} + +void WiFiClass::config(IPAddress local_ip) +{ + WiFiDrv::config(1, (uint32_t)local_ip, 0, 0); +} + +void WiFiClass::config(IPAddress local_ip, IPAddress dns_server) +{ + WiFiDrv::config(1, (uint32_t)local_ip, 0, 0); + WiFiDrv::setDNS(1, (uint32_t)dns_server, 0); +} + +void WiFiClass::config(IPAddress local_ip, IPAddress dns_server, IPAddress gateway) +{ + WiFiDrv::config(2, (uint32_t)local_ip, (uint32_t)gateway, 0); + WiFiDrv::setDNS(1, (uint32_t)dns_server, 0); +} + +void WiFiClass::config(IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet) +{ + WiFiDrv::config(3, (uint32_t)local_ip, (uint32_t)gateway, (uint32_t)subnet); + WiFiDrv::setDNS(1, (uint32_t)dns_server, 0); +} + +void WiFiClass::setDNS(IPAddress dns_server1) +{ + WiFiDrv::setDNS(1, (uint32_t)dns_server1, 0); +} + +void WiFiClass::setDNS(IPAddress dns_server1, IPAddress dns_server2) +{ + WiFiDrv::setDNS(2, (uint32_t)dns_server1, (uint32_t)dns_server2); +} + +int WiFiClass::disconnect() +{ + return WiFiDrv::disconnect(); +} + +uint8_t* WiFiClass::macAddress(uint8_t* mac) +{ + uint8_t* _mac = WiFiDrv::getMacAddress(); + memcpy(mac, _mac, WL_MAC_ADDR_LENGTH); + return mac; +} + +IPAddress WiFiClass::localIP() +{ + IPAddress ret; + WiFiDrv::getIpAddress(ret); + return ret; +} + +IPAddress WiFiClass::subnetMask() +{ + IPAddress ret; + WiFiDrv::getSubnetMask(ret); + return ret; +} + +IPAddress WiFiClass::gatewayIP() +{ + IPAddress ret; + WiFiDrv::getGatewayIP(ret); + return ret; +} + +char* WiFiClass::SSID() +{ + return WiFiDrv::getCurrentSSID(); +} + +uint8_t* WiFiClass::BSSID(uint8_t* bssid) +{ + uint8_t* _bssid = WiFiDrv::getCurrentBSSID(); + memcpy(bssid, _bssid, WL_MAC_ADDR_LENGTH); + return bssid; +} + +int32_t WiFiClass::RSSI() +{ + return WiFiDrv::getCurrentRSSI(); +} + +uint8_t WiFiClass::encryptionType() +{ + return WiFiDrv::getCurrentEncryptionType(); +} + + +int8_t WiFiClass::scanNetworks() +{ + uint8_t attempts = 10; + uint8_t numOfNetworks = 0; + + if (WiFiDrv::startScanNetworks() == WL_FAILURE) + return WL_FAILURE; + do + { + delay(2000); + numOfNetworks = WiFiDrv::getScanNetworks(); + } + while (( numOfNetworks == 0)&&(--attempts>0)); + return numOfNetworks; +} + +char* WiFiClass::SSID(uint8_t networkItem) +{ + return WiFiDrv::getSSIDNetoworks(networkItem); +} + +int32_t WiFiClass::RSSI(uint8_t networkItem) +{ + return WiFiDrv::getRSSINetoworks(networkItem); +} + +uint8_t WiFiClass::encryptionType(uint8_t networkItem) +{ + return WiFiDrv::getEncTypeNetowrks(networkItem); +} + +uint8_t WiFiClass::status() +{ + return WiFiDrv::getConnectionStatus(); +} + +int WiFiClass::hostByName(const char* aHostname, IPAddress& aResult) +{ + return WiFiDrv::getHostByName(aHostname, aResult); +} + +WiFiClass WiFi; diff --git a/libraries/WiFi/WiFi.h b/libraries/WiFi/WiFi.h new file mode 100644 index 0000000..ef36a84 --- /dev/null +++ b/libraries/WiFi/WiFi.h @@ -0,0 +1,227 @@ +#ifndef WiFi_h +#define WiFi_h + +#include <inttypes.h> + +extern "C" { + #include "utility/wl_definitions.h" + #include "utility/wl_types.h" +} + +#include "IPAddress.h" +#include "WiFiClient.h" +#include "WiFiServer.h" + +class WiFiClass +{ +private: + + static void init(); +public: + static int16_t _state[MAX_SOCK_NUM]; + static uint16_t _server_port[MAX_SOCK_NUM]; + + WiFiClass(); + + /* + * Get the first socket available + */ + static uint8_t getSocket(); + + /* + * Get firmware version + */ + static char* firmwareVersion(); + + + /* Start Wifi connection for OPEN networks + * + * param ssid: Pointer to the SSID string. + */ + int begin(char* ssid); + + /* Start Wifi connection with WEP encryption. + * Configure a key into the device. The key type (WEP-40, WEP-104) + * is determined by the size of the key (5 bytes for WEP-40, 13 bytes for WEP-104). + * + * param ssid: Pointer to the SSID string. + * param key_idx: The key index to set. Valid values are 0-3. + * param key: Key input buffer. + */ + int begin(char* ssid, uint8_t key_idx, const char* key); + + /* Start Wifi connection with passphrase + * the most secure supported mode will be automatically selected + * + * param ssid: Pointer to the SSID string. + * param passphrase: Passphrase. Valid characters in a passphrase + * must be between ASCII 32-126 (decimal). + */ + int begin(char* ssid, const char *passphrase); + + /* Change Ip configuration settings disabling the dhcp client + * + * param local_ip: Static ip configuration + */ + void config(IPAddress local_ip); + + /* Change Ip configuration settings disabling the dhcp client + * + * param local_ip: Static ip configuration + * param dns_server: IP configuration for DNS server 1 + */ + void config(IPAddress local_ip, IPAddress dns_server); + + /* Change Ip configuration settings disabling the dhcp client + * + * param local_ip: Static ip configuration + * param dns_server: IP configuration for DNS server 1 + * param gateway : Static gateway configuration + */ + void config(IPAddress local_ip, IPAddress dns_server, IPAddress gateway); + + /* Change Ip configuration settings disabling the dhcp client + * + * param local_ip: Static ip configuration + * param dns_server: IP configuration for DNS server 1 + * param gateway: Static gateway configuration + * param subnet: Static Subnet mask + */ + void config(IPAddress local_ip, IPAddress dns_server, IPAddress gateway, IPAddress subnet); + + /* Change DNS Ip configuration + * + * param dns_server1: ip configuration for DNS server 1 + */ + void setDNS(IPAddress dns_server1); + + /* Change DNS Ip configuration + * + * param dns_server1: ip configuration for DNS server 1 + * param dns_server2: ip configuration for DNS server 2 + * + */ + void setDNS(IPAddress dns_server1, IPAddress dns_server2); + + /* + * Disconnect from the network + * + * return: one value of wl_status_t enum + */ + int disconnect(void); + + /* + * Get the interface MAC address. + * + * return: pointer to uint8_t array with length WL_MAC_ADDR_LENGTH + */ + uint8_t* macAddress(uint8_t* mac); + + /* + * Get the interface IP address. + * + * return: Ip address value + */ + IPAddress localIP(); + + /* + * Get the interface subnet mask address. + * + * return: subnet mask address value + */ + IPAddress subnetMask(); + + /* + * Get the gateway ip address. + * + * return: gateway ip address value + */ + IPAddress gatewayIP(); + + /* + * Return the current SSID associated with the network + * + * return: ssid string + */ + char* SSID(); + + /* + * Return the current BSSID associated with the network. + * It is the MAC address of the Access Point + * + * return: pointer to uint8_t array with length WL_MAC_ADDR_LENGTH + */ + uint8_t* BSSID(uint8_t* bssid); + + /* + * Return the current RSSI /Received Signal Strength in dBm) + * associated with the network + * + * return: signed value + */ + int32_t RSSI(); + + /* + * Return the Encryption Type associated with the network + * + * return: one value of wl_enc_type enum + */ + uint8_t encryptionType(); + + /* + * Start scan WiFi networks available + * + * return: Number of discovered networks + */ + int8_t scanNetworks(); + + /* + * Return the SSID discovered during the network scan. + * + * param networkItem: specify from which network item want to get the information + * + * return: ssid string of the specified item on the networks scanned list + */ + char* SSID(uint8_t networkItem); + + /* + * Return the encryption type of the networks discovered during the scanNetworks + * + * param networkItem: specify from which network item want to get the information + * + * return: encryption type (enum wl_enc_type) of the specified item on the networks scanned list + */ + uint8_t encryptionType(uint8_t networkItem); + + /* + * Return the RSSI of the networks discovered during the scanNetworks + * + * param networkItem: specify from which network item want to get the information + * + * return: signed value of RSSI of the specified item on the networks scanned list + */ + int32_t RSSI(uint8_t networkItem); + + /* + * Return Connection status. + * + * return: one of the value defined in wl_status_t + */ + uint8_t status(); + + /* + * Resolve the given hostname to an IP address. + * param aHostname: Name to be resolved + * param aResult: IPAddress structure to store the returned IP address + * result: 1 if aIPAddrString was successfully converted to an IP address, + * else error code + */ + int hostByName(const char* aHostname, IPAddress& aResult); + + friend class WiFiClient; + friend class WiFiServer; +}; + +extern WiFiClass WiFi; + +#endif diff --git a/libraries/WiFi/WiFiClient.cpp b/libraries/WiFi/WiFiClient.cpp new file mode 100644 index 0000000..0b4b6dc --- /dev/null +++ b/libraries/WiFi/WiFiClient.cpp @@ -0,0 +1,179 @@ +extern "C" { + #include "utility/wl_definitions.h" + #include "utility/wl_types.h" + #include "socket.h" + #include "string.h" + #include "utility/debug.h" +} + +#include "WiFi.h" +#include "WiFiClient.h" +#include "WiFiServer.h" +#include "server_drv.h" + + +uint16_t WiFiClient::_srcport = 1024; + +WiFiClient::WiFiClient() : _sock(MAX_SOCK_NUM) { +} + +WiFiClient::WiFiClient(uint8_t sock) : _sock(sock) { +} + +int WiFiClient::connect(const char* host, uint16_t port) { + IPAddress remote_addr; + if (WiFi.hostByName(host, remote_addr)) + { + return connect(remote_addr, port); + } + return 0; +} + +int WiFiClient::connect(IPAddress ip, uint16_t port) { + _sock = getFirstSocket(); + if (_sock != NO_SOCKET_AVAIL) + { + ServerDrv::startClient(uint32_t(ip), port, _sock); + WiFiClass::_state[_sock] = _sock; + + unsigned long start = millis(); + + // wait 4 second for the connection to close + while (!connected() && millis() - start < 10000) + delay(1); + + if (!connected()) + { + return 0; + } + }else{ + Serial.println("No Socket available"); + return 0; + } + return 1; +} + +size_t WiFiClient::write(uint8_t b) { + return write(&b, 1); +} + +size_t WiFiClient::write(const uint8_t *buf, size_t size) { + if (_sock >= MAX_SOCK_NUM) + { + setWriteError(); + return 0; + } + if (size==0) + { + setWriteError(); + return 0; + } + + + if (!ServerDrv::sendData(_sock, buf, size)) + { + setWriteError(); + return 0; + } + if (!ServerDrv::checkDataSent(_sock)) + { + setWriteError(); + return 0; + } + + return size; +} + +int WiFiClient::available() { + if (_sock != 255) + { + return ServerDrv::availData(_sock); + } + + return 0; +} + +int WiFiClient::read() { + uint8_t b; + if (!available()) + return -1; + + ServerDrv::getData(_sock, &b); + return b; +} + + +int WiFiClient::read(uint8_t* buf, size_t size) { + if (!ServerDrv::getDataBuf(_sock, buf, &size)) + return -1; + return 0; +} + +int WiFiClient::peek() { + uint8_t b; + if (!available()) + return -1; + + ServerDrv::getData(_sock, &b, 1); + return b; +} + +void WiFiClient::flush() { + while (available()) + read(); +} + +void WiFiClient::stop() { + + if (_sock == 255) + return; + + ServerDrv::stopClient(_sock); + WiFiClass::_state[_sock] = NA_STATE; + + int count = 0; + // wait maximum 5 secs for the connection to close + while (status() != CLOSED && ++count < 50) + delay(100); + + _sock = 255; +} + +uint8_t WiFiClient::connected() { + + if (_sock == 255) { + return 0; + } else { + uint8_t s = status(); + + return !(s == LISTEN || s == CLOSED || s == FIN_WAIT_1 || + s == FIN_WAIT_2 || s == TIME_WAIT || + s == SYN_SENT || s== SYN_RCVD || + (s == CLOSE_WAIT)); + } +} + +uint8_t WiFiClient::status() { + if (_sock == 255) { + return CLOSED; + } else { + return ServerDrv::getClientState(_sock); + } +} + +WiFiClient::operator bool() { + return _sock != 255; +} + +// Private Methods +uint8_t WiFiClient::getFirstSocket() +{ + for (int i = 0; i < MAX_SOCK_NUM; i++) { + if (WiFiClass::_state[i] == NA_STATE) + { + return i; + } + } + return SOCK_NOT_AVAIL; +} + diff --git a/libraries/WiFi/WiFiClient.h b/libraries/WiFi/WiFiClient.h new file mode 100644 index 0000000..5a7f0f3 --- /dev/null +++ b/libraries/WiFi/WiFiClient.h @@ -0,0 +1,40 @@ +#ifndef wificlient_h +#define wificlient_h +#include "Arduino.h" +#include "Print.h" +#include "Client.h" +#include "IPAddress.h" + +class WiFiClient : public Client { + +public: + WiFiClient(); + WiFiClient(uint8_t sock); + + uint8_t status(); + virtual int connect(IPAddress ip, uint16_t port); + virtual int connect(const char *host, uint16_t port); + virtual size_t write(uint8_t); + virtual size_t write(const uint8_t *buf, size_t size); + virtual int available(); + virtual int read(); + virtual int read(uint8_t *buf, size_t size); + virtual int peek(); + virtual void flush(); + virtual void stop(); + virtual uint8_t connected(); + virtual operator bool(); + + friend class WiFiServer; + + using Print::write; + +private: + static uint16_t _srcport; + uint8_t _sock; //not used + uint16_t _socket; + + uint8_t getFirstSocket(); +}; + +#endif diff --git a/libraries/WiFi/WiFiServer.cpp b/libraries/WiFi/WiFiServer.cpp new file mode 100644 index 0000000..2f03bc1 --- /dev/null +++ b/libraries/WiFi/WiFiServer.cpp @@ -0,0 +1,89 @@ +#include <string.h> +#include "server_drv.h" + +extern "C" { + #include "utility/debug.h" +} + +#include "WiFi.h" +#include "WiFiClient.h" +#include "WiFiServer.h" + +WiFiServer::WiFiServer(uint16_t port) +{ + _port = port; +} + +void WiFiServer::begin() +{ + uint8_t _sock = WiFiClass::getSocket(); + if (_sock != NO_SOCKET_AVAIL) + { + ServerDrv::startServer(_port, _sock); + WiFiClass::_server_port[_sock] = _port; + WiFiClass::_state[_sock] = _sock; + } +} + +WiFiClient WiFiServer::available(byte* status) +{ + static int cycle_server_down = 0; + const int TH_SERVER_DOWN = 50; + + for (int sock = 0; sock < MAX_SOCK_NUM; sock++) + { + if (WiFiClass::_server_port[sock] == _port) + { + WiFiClient client(sock); + uint8_t _status = client.status(); + uint8_t _ser_status = this->status(); + + if (status != NULL) + *status = _status; + + //server not in listen state, restart it + if ((_ser_status == 0)&&(cycle_server_down++ > TH_SERVER_DOWN)) + { + ServerDrv::startServer(_port, sock); + cycle_server_down = 0; + } + + if (_status == ESTABLISHED) + { + return client; //TODO + } + } + } + + return WiFiClient(255); +} + +uint8_t WiFiServer::status() { + return ServerDrv::getServerState(0); +} + + +size_t WiFiServer::write(uint8_t b) +{ + return write(&b, 1); +} + +size_t WiFiServer::write(const uint8_t *buffer, size_t size) +{ + size_t n = 0; + + for (int sock = 0; sock < MAX_SOCK_NUM; sock++) + { + if (WiFiClass::_server_port[sock] != 0) + { + WiFiClient client(sock); + + if (WiFiClass::_server_port[sock] == _port && + client.status() == ESTABLISHED) + { + n+=client.write(buffer, size); + } + } + } + return n; +} diff --git a/libraries/WiFi/WiFiServer.h b/libraries/WiFi/WiFiServer.h new file mode 100644 index 0000000..68b574c --- /dev/null +++ b/libraries/WiFi/WiFiServer.h @@ -0,0 +1,27 @@ +#ifndef wifiserver_h +#define wifiserver_h + +extern "C" { + #include "utility/wl_definitions.h" +} + +#include "Server.h" + +class WiFiClient; + +class WiFiServer : public Server { +private: + uint16_t _port; + void* pcb; +public: + WiFiServer(uint16_t); + WiFiClient available(uint8_t* status = NULL); + void begin(); + virtual size_t write(uint8_t); + virtual size_t write(const uint8_t *buf, size_t size); + uint8_t status(); + + using Print::write; +}; + +#endif diff --git a/libraries/WiFi/WiFiUdp.cpp b/libraries/WiFi/WiFiUdp.cpp new file mode 100644 index 0000000..7020df8 --- /dev/null +++ b/libraries/WiFi/WiFiUdp.cpp @@ -0,0 +1,163 @@ + +extern "C" { + #include "utility/debug.h" + #include "utility/wifi_spi.h" +} +#include <string.h> +#include "server_drv.h" +#include "wifi_drv.h" + +#include "WiFi.h" +#include "WiFiUdp.h" +#include "WiFiClient.h" +#include "WiFiServer.h" + + +/* Constructor */ +WiFiUDP::WiFiUDP() : _sock(NO_SOCKET_AVAIL) {} + +/* Start WiFiUDP socket, listening at local port PORT */ +uint8_t WiFiUDP::begin(uint16_t port) { + + uint8_t sock = WiFiClass::getSocket(); + if (sock != NO_SOCKET_AVAIL) + { + ServerDrv::startServer(port, sock, UDP_MODE); + WiFiClass::_server_port[sock] = port; + _sock = sock; + _port = port; + return 1; + } + return 0; + +} + +/* return number of bytes available in the current packet, + will return zero if parsePacket hasn't been called yet */ +int WiFiUDP::available() { + if (_sock != NO_SOCKET_AVAIL) + { + return ServerDrv::availData(_sock); + } + return 0; +} + +/* Release any resources being used by this WiFiUDP instance */ +void WiFiUDP::stop() +{ + if (_sock == NO_SOCKET_AVAIL) + return; + + ServerDrv::stopClient(_sock); + + _sock = NO_SOCKET_AVAIL; +} + +int WiFiUDP::beginPacket(const char *host, uint16_t port) +{ + // Look up the host first + int ret = 0; + IPAddress remote_addr; + if (WiFi.hostByName(host, remote_addr)) + { + return beginPacket(remote_addr, port); + } + return ret; +} + +int WiFiUDP::beginPacket(IPAddress ip, uint16_t port) +{ + if (_sock == NO_SOCKET_AVAIL) + _sock = WiFiClass::getSocket(); + if (_sock != NO_SOCKET_AVAIL) + { + ServerDrv::startClient(uint32_t(ip), port, _sock, UDP_MODE); + WiFiClass::_state[_sock] = _sock; + return 1; + } + return 0; +} + +int WiFiUDP::endPacket() +{ + return ServerDrv::sendUdpData(_sock); +} + +size_t WiFiUDP::write(uint8_t byte) +{ + return write(&byte, 1); +} + +size_t WiFiUDP::write(const uint8_t *buffer, size_t size) +{ + ServerDrv::insertDataBuf(_sock, buffer, size); + return size; +} + +int WiFiUDP::parsePacket() +{ + return available(); +} + +int WiFiUDP::read() +{ + uint8_t b; + if (available()) + { + ServerDrv::getData(_sock, &b); + return b; + }else{ + return -1; + } +} + +int WiFiUDP::read(unsigned char* buffer, size_t len) +{ + if (available()) + { + size_t size = 0; + if (!ServerDrv::getDataBuf(_sock, buffer, &size)) + return -1; + // TODO check if the buffer is too smal respect to buffer size + return size; + }else{ + return -1; + } +} + +int WiFiUDP::peek() +{ + uint8_t b; + if (!available()) + return -1; + + ServerDrv::getData(_sock, &b, 1); + return b; +} + +void WiFiUDP::flush() +{ + while (available()) + read(); +} + +IPAddress WiFiUDP::remoteIP() +{ + uint8_t _remoteIp[4] = {0}; + uint8_t _remotePort[2] = {0}; + + WiFiDrv::getRemoteData(_sock, _remoteIp, _remotePort); + IPAddress ip(_remoteIp); + return ip; +} + +uint16_t WiFiUDP::remotePort() +{ + uint8_t _remoteIp[4] = {0}; + uint8_t _remotePort[2] = {0}; + + WiFiDrv::getRemoteData(_sock, _remoteIp, _remotePort); + uint16_t port = (_remotePort[0]<<8)+_remotePort[1]; + return port; +} + diff --git a/libraries/WiFi/WiFiUdp.h b/libraries/WiFi/WiFiUdp.h new file mode 100644 index 0000000..1b31693 --- /dev/null +++ b/libraries/WiFi/WiFiUdp.h @@ -0,0 +1,61 @@ +#ifndef wifiudp_h +#define wifiudp_h + +#include <Udp.h> + +#define UDP_TX_PACKET_MAX_SIZE 24 + +class WiFiUDP : public UDP { +private: + uint8_t _sock; // socket ID for Wiz5100 + uint16_t _port; // local port to listen on + +public: + WiFiUDP(); // Constructor + virtual uint8_t begin(uint16_t); // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use + virtual void stop(); // Finish with the UDP socket + + // Sending UDP packets + + // Start building up a packet to send to the remote host specific in ip and port + // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port + virtual int beginPacket(IPAddress ip, uint16_t port); + // Start building up a packet to send to the remote host specific in host and port + // Returns 1 if successful, 0 if there was a problem resolving the hostname or port + virtual int beginPacket(const char *host, uint16_t port); + // Finish off this packet and send it + // Returns 1 if the packet was sent successfully, 0 if there was an error + virtual int endPacket(); + // Write a single byte into the packet + virtual size_t write(uint8_t); + // Write size bytes from buffer into the packet + virtual size_t write(const uint8_t *buffer, size_t size); + + using Print::write; + + // Start processing the next available incoming packet + // Returns the size of the packet in bytes, or 0 if no packets are available + virtual int parsePacket(); + // Number of bytes remaining in the current packet + virtual int available(); + // Read a single byte from the current packet + virtual int read(); + // Read up to len bytes from the current packet and place them into buffer + // Returns the number of bytes read, or 0 if none are available + virtual int read(unsigned char* buffer, size_t len); + // Read up to len characters from the current packet and place them into buffer + // Returns the number of characters read, or 0 if none are available + virtual int read(char* buffer, size_t len) { return read((unsigned char*)buffer, len); }; + // Return the next byte from the current packet without moving on to the next byte + virtual int peek(); + virtual void flush(); // Finish reading the current packet + + // Return the IP address of the host who sent the current incoming packet + virtual IPAddress remoteIP(); + // Return the port of the host who sent the current incoming packet + virtual uint16_t remotePort(); + + friend class WiFiDrv; +}; + +#endif diff --git a/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino b/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino new file mode 100644 index 0000000..f42a7f3 --- /dev/null +++ b/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino @@ -0,0 +1,121 @@ +/* + + This example connects to an unencrypted Wifi network. + Then it prints the MAC address of the Wifi shield, + the IP address obtained, and other network details. + + Circuit: + * WiFi shield attached + + created 13 July 2010 + by dlf (Metodo2 srl) + modified 31 May 2012 + by Tom Igoe + */ + #include <WiFi.h> + +char ssid[] = "yourNetwork"; // the name of your network +int status = WL_IDLE_STATUS; // the Wifi radio's status + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to open SSID: "); + Serial.println(ssid); + status = WiFi.begin(ssid); + + // wait 10 seconds for connection: + delay(10000); + } + + // you're connected now, so print out the data: + Serial.print("You're connected to the network"); + printCurrentNet(); + printWifiData(); +} + +void loop() { + // check the network connection once every 10 seconds: + delay(10000); + printCurrentNet(); +} + +void printWifiData() { + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + Serial.println(ip); + + // print your MAC address: + byte mac[6]; + WiFi.macAddress(mac); + Serial.print("MAC address: "); + Serial.print(mac[5],HEX); + Serial.print(":"); + Serial.print(mac[4],HEX); + Serial.print(":"); + Serial.print(mac[3],HEX); + Serial.print(":"); + Serial.print(mac[2],HEX); + Serial.print(":"); + Serial.print(mac[1],HEX); + Serial.print(":"); + Serial.println(mac[0],HEX); + + // print your subnet mask: + IPAddress subnet = WiFi.subnetMask(); + Serial.print("NetMask: "); + Serial.println(subnet); + + // print your gateway address: + IPAddress gateway = WiFi.gatewayIP(); + Serial.print("Gateway: "); + Serial.println(gateway); +} + +void printCurrentNet() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print the MAC address of the router you're attached to: + byte bssid[6]; + WiFi.BSSID(bssid); + Serial.print("BSSID: "); + Serial.print(bssid[5],HEX); + Serial.print(":"); + Serial.print(bssid[4],HEX); + Serial.print(":"); + Serial.print(bssid[3],HEX); + Serial.print(":"); + Serial.print(bssid[2],HEX); + Serial.print(":"); + Serial.print(bssid[1],HEX); + Serial.print(":"); + Serial.println(bssid[0],HEX); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.println(rssi); + + // print the encryption type: + byte encryption = WiFi.encryptionType(); + Serial.print("Encryption Type:"); + Serial.println(encryption,HEX); +} + diff --git a/libraries/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino b/libraries/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino new file mode 100644 index 0000000..19736b5 --- /dev/null +++ b/libraries/WiFi/examples/ConnectWithWEP/ConnectWithWEP.ino @@ -0,0 +1,126 @@ +/* + + This example connects to a WEP-encrypted Wifi network. + Then it prints the MAC address of the Wifi shield, + the IP address obtained, and other network details. + + If you use 40-bit WEP, you need a key that is 10 characters long, + and the characters must be hexadecimal (0-9 or A-F). + e.g. for 40-bit, ABBADEAF01 will work, but ABBADEAF won't work + (too short) and ABBAISDEAF won't work (I and S are not + hexadecimal characters). + + For 128-bit, you need a string that is 26 characters long. + D0D0DEADF00DABBADEAFBEADED will work because it's 26 characters, + all in the 0-9, A-F range. + + Circuit: + * WiFi shield attached + + created 13 July 2010 + by dlf (Metodo2 srl) + modified 31 May 2012 + by Tom Igoe + */ +#include <WiFi.h> + +char ssid[] = "yourNetwork"; // your network SSID (name) +char key[] = "D0D0DEADF00DABBADEAFBEADED"; // your network key +int keyIndex = 0; // your network key Index number +int status = WL_IDLE_STATUS; // the Wifi radio's status + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to WEP network, SSID: "); + Serial.println(ssid); + status = WiFi.begin(ssid, keyIndex, key); + + // wait 10 seconds for connection: + delay(10000); + } + + // once you are connected : + Serial.print("You're connected to the network"); + printCurrentNet(); + printWifiData(); +} + +void loop() { + // check the network connection once every 10 seconds: + delay(10000); + printCurrentNet(); +} + +void printWifiData() { + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + Serial.println(ip); + + // print your MAC address: + byte mac[6]; + WiFi.macAddress(mac); + Serial.print("MAC address: "); + Serial.print(mac[5],HEX); + Serial.print(":"); + Serial.print(mac[4],HEX); + Serial.print(":"); + Serial.print(mac[3],HEX); + Serial.print(":"); + Serial.print(mac[2],HEX); + Serial.print(":"); + Serial.print(mac[1],HEX); + Serial.print(":"); + Serial.println(mac[0],HEX); +} + +void printCurrentNet() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print the MAC address of the router you're attached to: + byte bssid[6]; + WiFi.BSSID(bssid); + Serial.print("BSSID: "); + Serial.print(bssid[5],HEX); + Serial.print(":"); + Serial.print(bssid[4],HEX); + Serial.print(":"); + Serial.print(bssid[3],HEX); + Serial.print(":"); + Serial.print(bssid[2],HEX); + Serial.print(":"); + Serial.print(bssid[1],HEX); + Serial.print(":"); + Serial.println(bssid[0],HEX); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.println(rssi); + + // print the encryption type: + byte encryption = WiFi.encryptionType(); + Serial.print("Encryption Type:"); + Serial.println(encryption,HEX); + Serial.println(); +} + + + diff --git a/libraries/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino b/libraries/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino new file mode 100644 index 0000000..fcc33ec --- /dev/null +++ b/libraries/WiFi/examples/ConnectWithWPA/ConnectWithWPA.ino @@ -0,0 +1,116 @@ +/* + + This example connects to an unencrypted Wifi network. + Then it prints the MAC address of the Wifi shield, + the IP address obtained, and other network details. + + Circuit: + * WiFi shield attached + + created 13 July 2010 + by dlf (Metodo2 srl) + modified 31 May 2012 + by Tom Igoe + */ + #include <WiFi.h> + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password +int status = WL_IDLE_STATUS; // the Wifi radio's status + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to WPA SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + + // you're connected now, so print out the data: + Serial.print("You're connected to the network"); + printCurrentNet(); + printWifiData(); + +} + +void loop() { + // check the network connection once every 10 seconds: + delay(10000); + printCurrentNet(); +} + +void printWifiData() { + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + Serial.println(ip); + + // print your MAC address: + byte mac[6]; + WiFi.macAddress(mac); + Serial.print("MAC address: "); + Serial.print(mac[5],HEX); + Serial.print(":"); + Serial.print(mac[4],HEX); + Serial.print(":"); + Serial.print(mac[3],HEX); + Serial.print(":"); + Serial.print(mac[2],HEX); + Serial.print(":"); + Serial.print(mac[1],HEX); + Serial.print(":"); + Serial.println(mac[0],HEX); + +} + +void printCurrentNet() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print the MAC address of the router you're attached to: + byte bssid[6]; + WiFi.BSSID(bssid); + Serial.print("BSSID: "); + Serial.print(bssid[5],HEX); + Serial.print(":"); + Serial.print(bssid[4],HEX); + Serial.print(":"); + Serial.print(bssid[3],HEX); + Serial.print(":"); + Serial.print(bssid[2],HEX); + Serial.print(":"); + Serial.print(bssid[1],HEX); + Serial.print(":"); + Serial.println(bssid[0],HEX); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.println(rssi); + + // print the encryption type: + byte encryption = WiFi.encryptionType(); + Serial.print("Encryption Type:"); + Serial.println(encryption,HEX); + Serial.println(); +} + diff --git a/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino b/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino new file mode 100644 index 0000000..93b3000 --- /dev/null +++ b/libraries/WiFi/examples/ScanNetworks/ScanNetworks.ino @@ -0,0 +1,119 @@ +/* + + This example prints the Wifi shield's MAC address, and + scans for available Wifi networks using the Wifi shield. + Every ten seconds, it scans again. It doesn't actually + connect to any network, so no encryption scheme is specified. + + Circuit: + * WiFi shield attached + + created 13 July 2010 + by dlf (Metodo2 srl) + modified 21 Junn 2012 + by Tom Igoe and Jaymes Dec + */ + + +#include <SPI.h> +#include <WiFi.h> + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // Print WiFi MAC address: + printMacAddress(); + + // scan for existing networks: + Serial.println("Scanning available networks..."); + listNetworks(); +} + +void loop() { + delay(10000); + // scan for existing networks: + Serial.println("Scanning available networks..."); + listNetworks(); +} + +void printMacAddress() { + // the MAC address of your Wifi shield + byte mac[6]; + + // print your MAC address: + WiFi.macAddress(mac); + Serial.print("MAC: "); + Serial.print(mac[5],HEX); + Serial.print(":"); + Serial.print(mac[4],HEX); + Serial.print(":"); + Serial.print(mac[3],HEX); + Serial.print(":"); + Serial.print(mac[2],HEX); + Serial.print(":"); + Serial.print(mac[1],HEX); + Serial.print(":"); + Serial.println(mac[0],HEX); +} + +void listNetworks() { + // scan for nearby networks: + Serial.println("** Scan Networks **"); + int numSsid = WiFi.scanNetworks(); + if (numSsid == -1) + { + Serial.println("Couldn't get a wifi connection"); + while(true); + } + + // print the list of networks seen: + Serial.print("number of available networks:"); + Serial.println(numSsid); + + // print the network number and name for each network found: + for (int thisNet = 0; thisNet<numSsid; thisNet++) { + Serial.print(thisNet); + Serial.print(") "); + Serial.print(WiFi.SSID(thisNet)); + Serial.print("\tSignal: "); + Serial.print(WiFi.RSSI(thisNet)); + Serial.print(" dBm"); + Serial.print("\tEncryption: "); + printEncryptionType(WiFi.encryptionType(thisNet)); + } +} + +void printEncryptionType(int thisType) { + // read the encryption type and print out the name: + switch (thisType) { + case ENC_TYPE_WEP: + Serial.println("WEP"); + break; + case ENC_TYPE_TKIP: + Serial.println("WPA"); + break; + case ENC_TYPE_CCMP: + Serial.println("WPA2"); + break; + case ENC_TYPE_NONE: + Serial.println("None"); + break; + case ENC_TYPE_AUTO: + Serial.println("Auto"); + break; + } +} + + + diff --git a/libraries/WiFi/examples/SimpleWebServerWiFi/SimpleWebServerWiFi.ino b/libraries/WiFi/examples/SimpleWebServerWiFi/SimpleWebServerWiFi.ino new file mode 100644 index 0000000..cdb4e62 --- /dev/null +++ b/libraries/WiFi/examples/SimpleWebServerWiFi/SimpleWebServerWiFi.ino @@ -0,0 +1,129 @@ +/* + WiFi Web Server LED Blink + + A simple web server that lets you blink an LED via the web. + This sketch will print the IP address of your WiFi Shield (once connected) + to the Serial monitor. From there, you can open that address in a web browser + to turn on and off the LED on pin 9. + + If the IP address of your shield is yourAddress: + http://yourAddress/H turns the LED on + http://yourAddress/L turns it off + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + Circuit: + * WiFi shield attached + * LED attached to pin 9 + + created 25 Nov 2012 + by Tom Igoe + */ +#include <SPI.h> +#include <WiFi.h> + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password +int keyIndex = 0; // your network key Index number (needed only for WEP) + +int status = WL_IDLE_STATUS; +WiFiServer server(80); + +void setup() { + Serial.begin(9600); // initialize serial communication + pinMode(9, OUTPUT); // set the LED pin mode + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + while(true); // don't continue + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to Network named: "); + Serial.println(ssid); // print the network name (SSID); + + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + // wait 10 seconds for connection: + delay(10000); + } + server.begin(); // start the web server on port 80 + printWifiStatus(); // you're connected now, so print out the status +} + + +void loop() { + WiFiClient client = server.available(); // listen for incoming clients + + if (client) { // if you get a client, + Serial.println("new client"); // print a message out the serial port + String currentLine = ""; // make a String to hold incoming data from the client + while (client.connected()) { // loop while the client's connected + if (client.available()) { // if there's bytes to read from the client, + char c = client.read(); // read a byte, then + Serial.write(c); // print it out the serial monitor + if (c == '\n') { // if the byte is a newline character + + // if the current line is blank, you got two newline characters in a row. + // that's the end of the client HTTP request, so send a response: + if (currentLine.length() == 0) { + // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK) + // and a content-type so the client knows what's coming, then a blank line: + client.println("HTTP/1.1 200 OK"); + client.println("Content-type:text/html"); + client.println(); + + // the content of the HTTP response follows the header: + client.print("Click <a href=\"/H\">here</a> turn the LED on pin 9 on<br>"); + client.print("Click <a href=\"/L\">here</a> turn the LED on pin 9 off<br>"); + + // The HTTP response ends with another blank line: + client.println(); + // break out of the while loop: + break; + } + else { // if you got a newline, then clear currentLine: + currentLine = ""; + } + } + else if (c != '\r') { // if you got anything else but a carriage return character, + currentLine += c; // add it to the end of the currentLine + } + + // Check to see if the client request was "GET /H" or "GET /L": + if (currentLine.endsWith("GET /H")) { + digitalWrite(9, HIGH); // GET /H turns the LED on + } + if (currentLine.endsWith("GET /L")) { + digitalWrite(9, LOW); // GET /L turns the LED off + } + } + } + // close the connection: + client.stop(); + Serial.println("client disonnected"); + } +} + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); + // print where to go in a browser: + Serial.print("To see this page in action, open a browser to http://"); + Serial.println(ip); +} diff --git a/libraries/WiFi/examples/WiFiUdpNtpClient/WiFiUdpNtpClient.ino b/libraries/WiFi/examples/WiFiUdpNtpClient/WiFiUdpNtpClient.ino new file mode 100644 index 0000000..dd8b003 --- /dev/null +++ b/libraries/WiFi/examples/WiFiUdpNtpClient/WiFiUdpNtpClient.ino @@ -0,0 +1,182 @@ +/* + + Udp NTP Client + + Get the time from a Network Time Protocol (NTP) time server + Demonstrates use of UDP sendPacket and ReceivePacket + For more on NTP time servers and the messages needed to communicate with them, + see http://en.wikipedia.org/wiki/Network_Time_Protocol + + created 4 Sep 2010 + by Michael Margolis + modified 9 Apr 2012 + by Tom Igoe + + This code is in the public domain. + + */ + +#include <SPI.h> +#include <WiFi.h> +#include <WiFiUdp.h> + +int status = WL_IDLE_STATUS; +char ssid[] = "mynetwork"; // your network SSID (name) +char pass[] = "mypassword"; // your network password +int keyIndex = 0; // your network key Index number (needed only for WEP) + +unsigned int localPort = 2390; // local port to listen for UDP packets + +IPAddress timeServer(129, 6, 15, 28); // time.nist.gov NTP server + +const int NTP_PACKET_SIZE = 48; // NTP time stamp is in the first 48 bytes of the message + +byte packetBuffer[ NTP_PACKET_SIZE]; //buffer to hold incoming and outgoing packets + +// A UDP instance to let us send and receive packets over UDP +WiFiUDP Udp; + +void setup() +{ + // Open serial communications and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + + Serial.println("Connected to wifi"); + printWifiStatus(); + + Serial.println("\nStarting connection to server..."); + Udp.begin(localPort); +} + +void loop() +{ + sendNTPpacket(timeServer); // send an NTP packet to a time server + // wait to see if a reply is available + delay(1000); + Serial.println( Udp.parsePacket() ); + if ( Udp.parsePacket() ) { + Serial.println("packet received"); + // We've received a packet, read the data from it + Udp.read(packetBuffer,NTP_PACKET_SIZE); // read the packet into the buffer + + //the timestamp starts at byte 40 of the received packet and is four bytes, + // or two words, long. First, esxtract the two words: + + unsigned long highWord = word(packetBuffer[40], packetBuffer[41]); + unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]); + // combine the four bytes (two words) into a long integer + // this is NTP time (seconds since Jan 1 1900): + unsigned long secsSince1900 = highWord << 16 | lowWord; + Serial.print("Seconds since Jan 1 1900 = " ); + Serial.println(secsSince1900); + + // now convert NTP time into everyday time: + Serial.print("Unix time = "); + // Unix time starts on Jan 1 1970. In seconds, that's 2208988800: + const unsigned long seventyYears = 2208988800UL; + // subtract seventy years: + unsigned long epoch = secsSince1900 - seventyYears; + // print Unix time: + Serial.println(epoch); + + + // print the hour, minute and second: + Serial.print("The UTC time is "); // UTC is the time at Greenwich Meridian (GMT) + Serial.print((epoch % 86400L) / 3600); // print the hour (86400 equals secs per day) + Serial.print(':'); + if ( ((epoch % 3600) / 60) < 10 ) { + // In the first 10 minutes of each hour, we'll want a leading '0' + Serial.print('0'); + } + Serial.print((epoch % 3600) / 60); // print the minute (3600 equals secs per minute) + Serial.print(':'); + if ( (epoch % 60) < 10 ) { + // In the first 10 seconds of each minute, we'll want a leading '0' + Serial.print('0'); + } + Serial.println(epoch %60); // print the second + } + // wait ten seconds before asking for the time again + delay(10000); +} + +// send an NTP request to the time server at the given address +unsigned long sendNTPpacket(IPAddress& address) +{ + //Serial.println("1"); + // set all bytes in the buffer to 0 + memset(packetBuffer, 0, NTP_PACKET_SIZE); + // Initialize values needed to form NTP request + // (see URL above for details on the packets) + //Serial.println("2"); + packetBuffer[0] = 0b11100011; // LI, Version, Mode + packetBuffer[1] = 0; // Stratum, or type of clock + packetBuffer[2] = 6; // Polling Interval + packetBuffer[3] = 0xEC; // Peer Clock Precision + // 8 bytes of zero for Root Delay & Root Dispersion + packetBuffer[12] = 49; + packetBuffer[13] = 0x4E; + packetBuffer[14] = 49; + packetBuffer[15] = 52; + + //Serial.println("3"); + + // all NTP fields have been given values, now + // you can send a packet requesting a timestamp: + Udp.beginPacket(address, 123); //NTP requests are to port 123 + //Serial.println("4"); + Udp.write(packetBuffer,NTP_PACKET_SIZE); + //Serial.println("5"); + Udp.endPacket(); + //Serial.println("6"); +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + + + + + + + + + diff --git a/libraries/WiFi/examples/WifiChatServer/WifiChatServer.ino b/libraries/WiFi/examples/WifiChatServer/WifiChatServer.ino new file mode 100644 index 0000000..e4b1d1a --- /dev/null +++ b/libraries/WiFi/examples/WifiChatServer/WifiChatServer.ino @@ -0,0 +1,111 @@ +/* + Chat Server + + A simple server that distributes any incoming messages to all + connected clients. To use telnet to your device's IP address and type. + You can see the client's input in the serial monitor as well. + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + + Circuit: + * WiFi shield attached + + created 18 Dec 2009 + by David A. Mellis + modified 31 May 2012 + by Tom Igoe + + */ + +#include <SPI.h> +#include <WiFi.h> + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password (use for WPA, or use as key for WEP) + +int keyIndex = 0; // your network key Index number (needed only for WEP) + +int status = WL_IDLE_STATUS; + +WiFiServer server(23); + +boolean alreadyConnected = false; // whether or not the client was connected previously + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + // start the server: + server.begin(); + // you're connected now, so print out the status: + printWifiStatus(); + } + + +void loop() { + // wait for a new client: + WiFiClient client = server.available(); + + + // when the client sends the first byte, say hello: + if (client) { + if (!alreadyConnected) { + // clead out the input buffer: + client.flush(); + Serial.println("We have a new client"); + client.println("Hello, client!"); + alreadyConnected = true; + } + + if (client.available() > 0) { + // read the bytes incoming from the client: + char thisChar = client.read(); + // echo the bytes back to the client: + server.write(thisChar); + // echo the bytes to the server as well: + Serial.write(thisChar); + } + } +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + diff --git a/libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino b/libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino new file mode 100644 index 0000000..f8ffc07 --- /dev/null +++ b/libraries/WiFi/examples/WifiPachubeClient/WifiPachubeClient.ino @@ -0,0 +1,190 @@ +/* + Wifi Pachube sensor client + + This sketch connects an analog sensor to Pachube (http://www.pachube.com) + using an Arduino Wifi shield. + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + This example has been updated to use version 2.0 of the Pachube API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + Circuit: + * Analog sensor attached to analog in 0 + * Wifi shield attached to pins 10, 11, 12, 13 + + created 13 Mar 2012 + modified 31 May 2012 + by Tom Igoe + modified 8 Sept 2012 + by Scott Fitzgerald + + This code is in the public domain. + + */ +#include <SPI.h> +#include <WiFi.h> + +#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Arduino Project" // user agent is the project name + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password + +int status = WL_IDLE_STATUS; + +// initialize the library instance: +WiFiClient client; +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +IPAddress server(216,52,233,121); // numeric IP for api.pachube.com +//char server[] = "api.pachube.com"; // name address for pachube API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to pachube.com + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + // you're connected now, so print out the status: + printWifiStatus(); +} + + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + while (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(sensorReading); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(int thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.pachube.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + + // calculate the length of the sensor reading in bytes: + // 8 bytes for "sensor1," + number of digits of the data: + int thisLength = 8 + getLength(thisData); + client.println(thisLength); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.print("sensor1,"); + client.println(thisData); + + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + + +// This method calculates the number of digits in the +// sensor reading. Since each digit of the ASCII decimal +// representation is a byte, the number of digits equals +// the number of bytes: + +int getLength(int someValue) { + // there's at least one byte: + int digits = 1; + // continually divide the value by ten, + // adding one to the digit count for each + // time you divide, until you're at 0: + int dividend = someValue /10; + while (dividend > 0) { + dividend = dividend /10; + digits++; + } + // return the number of digits: + return digits; +} + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + + diff --git a/libraries/WiFi/examples/WifiPachubeClientString/WifiPachubeClientString.ino b/libraries/WiFi/examples/WifiPachubeClientString/WifiPachubeClientString.ino new file mode 100644 index 0000000..243fe83 --- /dev/null +++ b/libraries/WiFi/examples/WifiPachubeClientString/WifiPachubeClientString.ino @@ -0,0 +1,177 @@ +/* + Wifi Pachube sensor client with Strings + + This sketch connects an analog sensor to Pachube (http://www.pachube.com) + using a Arduino Wifi shield. + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + This example has been updated to use version 2.0 of the pachube.com API. + To make it work, create a feed with a datastream, and give it the ID + sensor1. Or change the code below to match your feed. + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * Analog sensor attached to analog in 0 + * Wifi shield attached to pins 10, 11, 12, 13 + + created 16 Mar 2012 + modified 31 May 2012 + by Tom Igoe + modified 8 Sept 2012 + by Scott Fitzgerald + + This code is in the public domain. + + */ + +#include <SPI.h> +#include <WiFi.h> + +#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +#define FEEDID 00000 // replace your feed ID +#define USERAGENT "My Arduino Project" // user agent is the project name + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password + +int status = WL_IDLE_STATUS; + +// initialize the library instance: +WiFiClient client; + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(216,52,233,121); // numeric IP for api.pachube.com +char server[] = "api.pachube.com"; // name address for pachube API + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; //delay between updates to pachube.com + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + // you're connected now, so print out the status: + printWifiStatus(); +} + +void loop() { + // read the analog sensor: + int sensorReading = analogRead(A0); + // convert the data to a String to send it: + + String dataString = "sensor1,"; + dataString += sensorReading; + + // you can append multiple readings to this String if your + // pachube feed is set up to handle multiple values: + int otherSensorReading = analogRead(A1); + dataString += "\nsensor2,"; + dataString += otherSensorReading; + + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + while (client.available()) { + char c = client.read(); + Serial.print(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + sendData(dataString); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void sendData(String thisData) { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.print("PUT /v2/feeds/"); + client.print(FEEDID); + client.println(".csv HTTP/1.1"); + client.println("Host: api.pachube.com"); + client.print("X-ApiKey: "); + client.println(APIKEY); + client.print("User-Agent: "); + client.println(USERAGENT); + client.print("Content-Length: "); + client.println(thisData.length()); + + // last pieces of the HTTP PUT request: + client.println("Content-Type: text/csv"); + client.println("Connection: close"); + client.println(); + + // here's the actual content of the PUT request: + client.println(thisData); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + // note the time that the connection was made or attempted: + lastConnectionTime = millis(); +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + diff --git a/libraries/WiFi/examples/WifiTwitterClient/WifiTwitterClient.ino b/libraries/WiFi/examples/WifiTwitterClient/WifiTwitterClient.ino new file mode 100644 index 0000000..3dc2c8d --- /dev/null +++ b/libraries/WiFi/examples/WifiTwitterClient/WifiTwitterClient.ino @@ -0,0 +1,163 @@ +/* + Wifi Twitter Client with Strings + + This sketch connects to Twitter using using an Arduino WiFi shield. + It parses the XML returned, and looks for <text>this is a tweet</text> + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + This example uses the String library, which is part of the Arduino core from + version 0019. + + Circuit: + * WiFi shield attached to pins 10, 11, 12, 13 + + created 23 apr 2012 + modified 31 May 2012 + by Tom Igoe + + This code is in the public domain. + + */ +#include <SPI.h> +#include <WiFi.h> + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "password"; // your network password (use for WPA, or use as key for WEP) +int keyIndex = 0; // your network key Index number (needed only for WEP) + +int status = WL_IDLE_STATUS; // status of the wifi connection + +// initialize the library instance: +WiFiClient client; + +const unsigned long requestInterval = 30*1000; // delay between requests; 30 seconds + +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +//IPAddress server(199,59,149,200); // numeric IP for api.twitter.com +char server[] = "api.twitter.com"; // name address for twitter API + +boolean requested; // whether you've made a request since connecting +unsigned long lastAttemptTime = 0; // last time you connected to the server, in milliseconds + +String currentLine = ""; // string to hold the text from server +String tweet = ""; // string to hold the tweet +boolean readingTweet = false; // if you're currently reading the tweet + +void setup() { + // reserve space for the strings: + currentLine.reserve(256); + tweet.reserve(150); + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + // you're connected now, so print out the status: + printWifiStatus(); + connectToServer(); +} + +void loop() +{ + if (client.connected()) { + if (client.available()) { + // read incoming bytes: + char inChar = client.read(); + + // add incoming byte to end of line: + currentLine += inChar; + + // if you get a newline, clear the line: + if (inChar == '\n') { + currentLine = ""; + } + // if the current line ends with <text>, it will + // be followed by the tweet: + if ( currentLine.endsWith("<text>")) { + // tweet is beginning. Clear the tweet string: + readingTweet = true; + tweet = ""; + // break out of the loop so this character isn't added to the tweet: + return; + } + // if you're currently reading the bytes of a tweet, + // add them to the tweet String: + if (readingTweet) { + if (inChar != '<') { + tweet += inChar; + } + else { + // if you got a "<" character, + // you've reached the end of the tweet: + readingTweet = false; + Serial.println(tweet); + // close the connection to the server: + client.stop(); + } + } + } + } + else if (millis() - lastAttemptTime > requestInterval) { + // if you're not connected, and two minutes have passed since + // your last connection, then attempt to connect again: + connectToServer(); + } +} + +void connectToServer() { + // attempt to connect, and wait a millisecond: + Serial.println("connecting to server..."); + if (client.connect(server, 80)) { + Serial.println("making HTTP request..."); + // make HTTP GET request to twitter: + client.println("GET /1/statuses/user_timeline.xml?screen_name=arduino HTTP/1.1"); + client.println("Host:api.twitter.com"); + client.println("Connection:close"); + client.println(); + } + // note the time of this connect attempt: + lastAttemptTime = millis(); +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + + + diff --git a/libraries/WiFi/examples/WifiUdpSendReceiveString/WifiUdpSendReceiveString.ino b/libraries/WiFi/examples/WifiUdpSendReceiveString/WifiUdpSendReceiveString.ino new file mode 100644 index 0000000..eb11295 --- /dev/null +++ b/libraries/WiFi/examples/WifiUdpSendReceiveString/WifiUdpSendReceiveString.ino @@ -0,0 +1,112 @@ + +/* + WiFi UDP Send and Receive String + + This sketch wait an UDP packet on localPort using a WiFi shield. + When a packet is received an Acknowledge packet is sent to the client on port remotePort + + Circuit: + * WiFi shield attached + + created 30 December 2012 + by dlf (Metodo2 srl) + + */ + + +#include <SPI.h> +#include <WiFi.h> +#include <WiFiUdp.h> + +int status = WL_IDLE_STATUS; +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password (use for WPA, or use as key for WEP) +int keyIndex = 0; // your network key Index number (needed only for WEP) + +unsigned int localPort = 2390; // local port to listen on + +char packetBuffer[255]; //buffer to hold incoming packet +char ReplyBuffer[] = "acknowledged"; // a string to send back + +WiFiUDP Udp; + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid); + + // wait 10 seconds for connection: + delay(10000); + } + Serial.println("Connected to wifi"); + printWifiStatus(); + + Serial.println("\nStarting connection to server..."); + // if you get a connection, report back via serial: + Udp.begin(localPort); +} + +void loop() { + + // if there's data available, read a packet + int packetSize = Udp.parsePacket(); + if(packetSize) + { + Serial.print("Received packet of size "); + Serial.println(packetSize); + Serial.print("From "); + IPAddress remoteIp = Udp.remoteIP(); + Serial.print(remoteIp); + Serial.print(", port "); + Serial.println(Udp.remotePort()); + + // read the packet into packetBufffer + int len = Udp.read(packetBuffer,255); + if (len >0) packetBuffer[len]=0; + Serial.println("Contents:"); + Serial.println(packetBuffer); + + // send a reply, to the IP address and port that sent us the packet we received + Udp.beginPacket(Udp.remoteIP(), Udp.remotePort()); + Udp.write(ReplyBuffer); + Udp.endPacket(); + } +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + + + diff --git a/libraries/WiFi/examples/WifiWebClient/WifiWebClient.ino b/libraries/WiFi/examples/WifiWebClient/WifiWebClient.ino new file mode 100644 index 0000000..17f44a3 --- /dev/null +++ b/libraries/WiFi/examples/WifiWebClient/WifiWebClient.ino @@ -0,0 +1,121 @@ + +/* + Web client + + This sketch connects to a website (http://www.google.com) + using a WiFi shield. + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + Circuit: + * WiFi shield attached + + created 13 July 2010 + by dlf (Metodo2 srl) + modified 31 May 2012 + by Tom Igoe + */ + + +#include <SPI.h> +#include <WiFi.h> + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password (use for WPA, or use as key for WEP) +int keyIndex = 0; // your network key Index number (needed only for WEP) + +int status = WL_IDLE_STATUS; +// if you don't want to use DNS (and reduce your sketch size) +// use the numeric IP instead of the name for the server: +IPAddress server(173,194,73,105); // numeric IP for Google (no DNS) +//char server[] = "www.google.com"; // name address for Google (using DNS) + +// Initialize the Ethernet client library +// with the IP address and port of the server +// that you want to connect to (port 80 is default for HTTP): +WiFiClient client; + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + Serial.println("Connected to wifi"); + printWifiStatus(); + + Serial.println("\nStarting connection to server..."); + // if you get a connection, report back via serial: + if (client.connect(server, 80)) { + Serial.println("connected to server"); + // Make a HTTP request: + client.println("GET /search?q=arduino HTTP/1.1"); + client.println("Host:www.google.com"); + client.println("Connection: close"); + client.println(); + } +} + +void loop() { + // if there are incoming bytes available + // from the server, read them and print them: + while (client.available()) { + char c = client.read(); + Serial.write(c); + } + + // if the server's disconnected, stop the client: + if (!client.connected()) { + Serial.println(); + Serial.println("disconnecting from server."); + client.stop(); + + // do nothing forevermore: + while(true); + } +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + + + + diff --git a/libraries/WiFi/examples/WifiWebClientRepeating/WifiWebClientRepeating.ino b/libraries/WiFi/examples/WifiWebClientRepeating/WifiWebClientRepeating.ino new file mode 100644 index 0000000..96eb628 --- /dev/null +++ b/libraries/WiFi/examples/WifiWebClientRepeating/WifiWebClientRepeating.ino @@ -0,0 +1,138 @@ +/* + Repeating Wifi Web client + + This sketch connects to a a web server and makes a request + using an Arduino Wifi shield. + + Circuit: + * Wifi shield attached to pins 10, 11, 12, 13 + + created 23 April 2012 + modifide 31 May 2012 + by Tom Igoe + + http://arduino.cc/en/Tutorial/WifiWebClientRepeating + This code is in the public domain. + */ + +#include <SPI.h> +#include <WiFi.h> + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password +int keyIndex = 0; // your network key Index number (needed only for WEP) + +int status = WL_IDLE_STATUS; + +// Initialize the Wifi client library +WiFiClient client; + +// server address: +char server[] = "www.arduino.cc"; +//IPAddress server(64,131,82,241); + +unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds +boolean lastConnected = false; // state of the connection last time through the main loop +const unsigned long postingInterval = 10*1000; // delay between updates, in milliseconds + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + // you're connected now, so print out the status: + printWifiStatus(); +} + +void loop() { + // if there's incoming data from the net connection. + // send it out the serial port. This is for debugging + // purposes only: + while (client.available()) { + char c = client.read(); + Serial.write(c); + } + + // if there's no net connection, but there was one last time + // through the loop, then stop the client: + if (!client.connected() && lastConnected) { + Serial.println(); + Serial.println("disconnecting."); + client.stop(); + } + + // if you're not connected, and ten seconds have passed since + // your last connection, then connect again and send data: + if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) { + httpRequest(); + } + // store the state of the connection for next time through + // the loop: + lastConnected = client.connected(); +} + +// this method makes a HTTP connection to the server: +void httpRequest() { + // if there's a successful connection: + if (client.connect(server, 80)) { + Serial.println("connecting..."); + // send the HTTP PUT request: + client.println("GET /latest.txt HTTP/1.1"); + client.println("Host: www.arduino.cc"); + client.println("User-Agent: arduino-ethernet"); + client.println("Connection: close"); + client.println(); + + // note the time that the connection was made: + lastConnectionTime = millis(); + } + else { + // if you couldn't make a connection: + Serial.println("connection failed"); + Serial.println("disconnecting."); + client.stop(); + } +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + + + + + + diff --git a/libraries/WiFi/examples/WifiWebServer/WifiWebServer.ino b/libraries/WiFi/examples/WifiWebServer/WifiWebServer.ino new file mode 100644 index 0000000..7d7a247 --- /dev/null +++ b/libraries/WiFi/examples/WifiWebServer/WifiWebServer.ino @@ -0,0 +1,134 @@ +/* + WiFi Web Server + + A simple web server that shows the value of the analog input pins. + using a WiFi shield. + + This example is written for a network using WPA encryption. For + WEP or WPA, change the Wifi.begin() call accordingly. + + Circuit: + * WiFi shield attached + * Analog inputs attached to pins A0 through A5 (optional) + + created 13 July 2010 + by dlf (Metodo2 srl) + modified 31 May 2012 + by Tom Igoe + + */ + +#include <SPI.h> +#include <WiFi.h> + + +char ssid[] = "yourNetwork"; // your network SSID (name) +char pass[] = "secretPassword"; // your network password +int keyIndex = 0; // your network key Index number (needed only for WEP) + +int status = WL_IDLE_STATUS; + +WiFiServer server(80); + +void setup() { + //Initialize serial and wait for port to open: + Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // check for the presence of the shield: + if (WiFi.status() == WL_NO_SHIELD) { + Serial.println("WiFi shield not present"); + // don't continue: + while(true); + } + + // attempt to connect to Wifi network: + while ( status != WL_CONNECTED) { + Serial.print("Attempting to connect to SSID: "); + Serial.println(ssid); + // Connect to WPA/WPA2 network. Change this line if using open or WEP network: + status = WiFi.begin(ssid, pass); + + // wait 10 seconds for connection: + delay(10000); + } + server.begin(); + // you're connected now, so print out the status: + printWifiStatus(); +} + + +void loop() { + // listen for incoming clients + WiFiClient client = server.available(); + if (client) { + Serial.println("new client"); + // an http request ends with a blank line + boolean currentLineIsBlank = true; + while (client.connected()) { + if (client.available()) { + char c = client.read(); + Serial.write(c); + // if you've gotten to the end of the line (received a newline + // character) and the line is blank, the http request has ended, + // so you can send a reply + if (c == '\n' && currentLineIsBlank) { + // send a standard http response header + client.println("HTTP/1.1 200 OK"); + client.println("Content-Type: text/html"); + client.println("Connection: close"); + client.println(); + client.println("<!DOCTYPE HTML>"); + client.println("<html>"); + // add a meta refresh tag, so the browser pulls again every 5 seconds: + client.println("<meta http-equiv=\"refresh\" content=\"5\">"); + // output the value of each analog input pin + for (int analogChannel = 0; analogChannel < 6; analogChannel++) { + int sensorReading = analogRead(analogChannel); + client.print("analog input "); + client.print(analogChannel); + client.print(" is "); + client.print(sensorReading); + client.println("<br />"); + } + client.println("</html>"); + break; + } + if (c == '\n') { + // you're starting a new line + currentLineIsBlank = true; + } + else if (c != '\r') { + // you've gotten a character on the current line + currentLineIsBlank = false; + } + } + } + // give the web browser time to receive the data + delay(1); + // close the connection: + client.stop(); + Serial.println("client disonnected"); + } +} + + +void printWifiStatus() { + // print the SSID of the network you're attached to: + Serial.print("SSID: "); + Serial.println(WiFi.SSID()); + + // print your WiFi shield's IP address: + IPAddress ip = WiFi.localIP(); + Serial.print("IP Address: "); + Serial.println(ip); + + // print the received signal strength: + long rssi = WiFi.RSSI(); + Serial.print("signal strength (RSSI):"); + Serial.print(rssi); + Serial.println(" dBm"); +} + diff --git a/libraries/WiFi/keywords.txt b/libraries/WiFi/keywords.txt new file mode 100644 index 0000000..4106a7d --- /dev/null +++ b/libraries/WiFi/keywords.txt @@ -0,0 +1,51 @@ +####################################### +# Syntax Coloring Map For WiFi +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +WiFi KEYWORD1 +Client KEYWORD1 +Server KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +status KEYWORD2 +connect KEYWORD2 +write KEYWORD2 +available KEYWORD2 +config KEYWORD2 +setDNS KEYWORD2 +read KEYWORD2 +flush KEYWORD2 +stop KEYWORD2 +connected KEYWORD2 +begin KEYWORD2 +disconnect KEYWORD2 +macAddress KEYWORD2 +localIP KEYWORD2 +subnetMask KEYWORD2 +gatewayIP KEYWORD2 +SSID KEYWORD2 +BSSID KEYWORD2 +RSSI KEYWORD2 +encryptionType KEYWORD2 +getResult KEYWORD2 +getSocket KEYWORD2 +WiFiClient KEYWORD2 +WiFiServer KEYWORD2 +WiFiUDP KEYWORD2 +beginPacket KEYWORD2 +endPacket KEYWORD2 +parsePacket KEYWORD2 +remoteIP KEYWORD2 +remotePort KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/WiFi/utility/debug.h b/libraries/WiFi/utility/debug.h new file mode 100644 index 0000000..9f71055 --- /dev/null +++ b/libraries/WiFi/utility/debug.h @@ -0,0 +1,77 @@ +//*********************************************/ +// +// File: debug.h +// +// Author: dlf (Metodo2 srl) +// +//********************************************/ + + +#ifndef Debug_H +#define Debug_H + +#include <stdio.h> +#include <string.h> + +#define PRINT_FILE_LINE() do { \ + Serial.print("[");Serial.print(__FILE__); \ + Serial.print("::");Serial.print(__LINE__);Serial.print("]");\ +}while (0); + +#ifdef _DEBUG_ + +#define INFO(format, args...) do { \ + char buf[250]; \ + sprintf(buf, format, args); \ + Serial.println(buf); \ +} while(0); + +#define INFO1(x) do { PRINT_FILE_LINE() Serial.print("-I-");\ + Serial.println(x); \ +}while (0); + + +#define INFO2(x,y) do { PRINT_FILE_LINE() Serial.print("-I-");\ + Serial.print(x,16);Serial.print(",");Serial.println(y,16); \ +}while (0); + + +#else +#define INFO1(x) do {} while(0); +#define INFO2(x,y) do {} while(0); +#define INFO(format, args...) do {} while(0); +#endif + +#if 0 +#define WARN(args) do { PRINT_FILE_LINE() \ + Serial.print("-W-"); Serial.println(args); \ +}while (0); +#else +#define WARN(args) do {} while (0); +#endif + +#if _DEBUG_SPI_ +#define DBG_PIN2 5 +#define DBG_PIN 4 + +#define START() digitalWrite(DBG_PIN2, HIGH); +#define END() digitalWrite(DBG_PIN2, LOW); +#define SET_TRIGGER() digitalWrite(DBG_PIN, HIGH); +#define RST_TRIGGER() digitalWrite(DBG_PIN, LOW); + +#define INIT_TRIGGER() pinMode(DBG_PIN, OUTPUT); \ + pinMode(DBG_PIN2, OUTPUT); \ + RST_TRIGGER() +#define TOGGLE_TRIGGER() SET_TRIGGER() \ + delayMicroseconds(2); \ + RST_TRIGGER() +#else +#define START() +#define END() +#define SET_TRIGGER() +#define RST_TRIGGER() +#define INIT_TRIGGER() +#define TOGGLE_TRIGGER() +#endif + +#endif diff --git a/libraries/WiFi/utility/server_drv.cpp b/libraries/WiFi/utility/server_drv.cpp new file mode 100644 index 0000000..4a6d293 --- /dev/null +++ b/libraries/WiFi/utility/server_drv.cpp @@ -0,0 +1,308 @@ +//#define _DEBUG_ + +#include "server_drv.h" + +#include "Arduino.h" +#include "spi_drv.h" + +extern "C" { +#include "wl_types.h" +#include "debug.h" +} + + +// Start server TCP on port specified +void ServerDrv::startServer(uint16_t port, uint8_t sock, uint8_t protMode)
+{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(START_SERVER_TCP_CMD, PARAM_NUMS_3);
+ SpiDrv::sendParam(port); + SpiDrv::sendParam(&sock, 1);
+ SpiDrv::sendParam(&protMode, 1, LAST_PARAM);
+ + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(START_SERVER_TCP_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); +} + +// Start server TCP on port specified +void ServerDrv::startClient(uint32_t ipAddress, uint16_t port, uint8_t sock, uint8_t protMode)
+{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(START_CLIENT_TCP_CMD, PARAM_NUMS_4);
+ SpiDrv::sendParam((uint8_t*)&ipAddress, sizeof(ipAddress)); + SpiDrv::sendParam(port); + SpiDrv::sendParam(&sock, 1);
+ SpiDrv::sendParam(&protMode, 1, LAST_PARAM);
+ + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(START_CLIENT_TCP_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); +} + +// Start server TCP on port specified +void ServerDrv::stopClient(uint8_t sock) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(STOP_CLIENT_TCP_CMD, PARAM_NUMS_1); + SpiDrv::sendParam(&sock, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(STOP_CLIENT_TCP_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); +} + + +uint8_t ServerDrv::getServerState(uint8_t sock) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(GET_STATE_TCP_CMD, PARAM_NUMS_1); + SpiDrv::sendParam(&sock, sizeof(sock), LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(GET_STATE_TCP_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); + return _data; +} + +uint8_t ServerDrv::getClientState(uint8_t sock) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(GET_CLIENT_STATE_TCP_CMD, PARAM_NUMS_1); + SpiDrv::sendParam(&sock, sizeof(sock), LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(GET_CLIENT_STATE_TCP_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); + return _data; +} + +uint16_t ServerDrv::availData(uint8_t sock) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(AVAIL_DATA_TCP_CMD, PARAM_NUMS_1); + SpiDrv::sendParam(&sock, sizeof(sock), LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _dataLen = 0; + uint16_t len = 0; + + SpiDrv::waitResponseCmd(AVAIL_DATA_TCP_CMD, PARAM_NUMS_1, (uint8_t*)&len, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return len; +} + +bool ServerDrv::getData(uint8_t sock, uint8_t *data, uint8_t peek) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(GET_DATA_TCP_CMD, PARAM_NUMS_2); + SpiDrv::sendParam(&sock, sizeof(sock)); + SpiDrv::sendParam(peek, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseData8(GET_DATA_TCP_CMD, &_data, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); + if (_dataLen!=0) + { + *data = _data; + return true; + } + return false; +} + +bool ServerDrv::getDataBuf(uint8_t sock, uint8_t *_data, uint16_t *_dataLen) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(GET_DATABUF_TCP_CMD, PARAM_NUMS_1); + SpiDrv::sendBuffer(&sock, sizeof(sock), LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + if (!SpiDrv::waitResponseData16(GET_DATABUF_TCP_CMD, _data, _dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); + if (*_dataLen!=0) + { + return true; + } + return false; +} + +bool ServerDrv::insertDataBuf(uint8_t sock, const uint8_t *data, uint16_t _len)
+{
+ WAIT_FOR_SLAVE_SELECT();
+ // Send Command
+ SpiDrv::sendCmd(INSERT_DATABUF_CMD, PARAM_NUMS_2);
+ SpiDrv::sendBuffer(&sock, sizeof(sock));
+ SpiDrv::sendBuffer((uint8_t *)data, _len, LAST_PARAM);
+
+ //Wait the reply elaboration
+ SpiDrv::waitForSlaveReady();
+
+ // Wait for reply
+ uint8_t _data = 0;
+ uint8_t _dataLen = 0;
+ if (!SpiDrv::waitResponseData8(INSERT_DATABUF_CMD, &_data, &_dataLen))
+ {
+ WARN("error waitResponse");
+ }
+ SpiDrv::spiSlaveDeselect();
+ if (_dataLen!=0)
+ {
+ return (_data == 1);
+ }
+ return false;
+}
+
+bool ServerDrv::sendUdpData(uint8_t sock)
+{
+ WAIT_FOR_SLAVE_SELECT();
+ // Send Command
+ SpiDrv::sendCmd(SEND_DATA_UDP_CMD, PARAM_NUMS_1);
+ SpiDrv::sendParam(&sock, sizeof(sock), LAST_PARAM);
+
+ //Wait the reply elaboration
+ SpiDrv::waitForSlaveReady();
+
+ // Wait for reply
+ uint8_t _data = 0;
+ uint8_t _dataLen = 0;
+ if (!SpiDrv::waitResponseData8(SEND_DATA_UDP_CMD, &_data, &_dataLen))
+ {
+ WARN("error waitResponse");
+ }
+ SpiDrv::spiSlaveDeselect();
+ if (_dataLen!=0)
+ {
+ return (_data == 1);
+ }
+ return false;
+}
+
+ +bool ServerDrv::sendData(uint8_t sock, const uint8_t *data, uint16_t len) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(SEND_DATA_TCP_CMD, PARAM_NUMS_2); + SpiDrv::sendBuffer(&sock, sizeof(sock)); + SpiDrv::sendBuffer((uint8_t *)data, len, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseData8(SEND_DATA_TCP_CMD, &_data, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); + if (_dataLen!=0) + { + return (_data == 1); + } + return false; +} + + +uint8_t ServerDrv::checkDataSent(uint8_t sock) +{ + const uint16_t TIMEOUT_DATA_SENT = 25; + uint16_t timeout = 0; + uint8_t _data = 0; + uint8_t _dataLen = 0; + + do { + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(DATA_SENT_TCP_CMD, PARAM_NUMS_1); + SpiDrv::sendParam(&sock, sizeof(sock), LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + if (!SpiDrv::waitResponseCmd(DATA_SENT_TCP_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse isDataSent"); + } + SpiDrv::spiSlaveDeselect(); + + if (_data) timeout = 0; + else{ + ++timeout; + delay(100); + } + + }while((_data==0)&&(timeout<TIMEOUT_DATA_SENT)); + return (timeout==TIMEOUT_DATA_SENT)?0:1; +} + +ServerDrv serverDrv; diff --git a/libraries/WiFi/utility/server_drv.h b/libraries/WiFi/utility/server_drv.h new file mode 100644 index 0000000..50ba7e3 --- /dev/null +++ b/libraries/WiFi/utility/server_drv.h @@ -0,0 +1,41 @@ +#ifndef Server_Drv_h +#define Server_Drv_h + +#include <inttypes.h> +#include "wifi_spi.h" + +typedef enum eProtMode {TCP_MODE, UDP_MODE}tProtMode;
+
+class ServerDrv +{ +public: +
+ // Start server TCP on port specified + static void startServer(uint16_t port, uint8_t sock, uint8_t protMode=TCP_MODE);
+ + static void startClient(uint32_t ipAddress, uint16_t port, uint8_t sock, uint8_t protMode=TCP_MODE);
+ + static void stopClient(uint8_t sock); + + static uint8_t getServerState(uint8_t sock); + + static uint8_t getClientState(uint8_t sock); + + static bool getData(uint8_t sock, uint8_t *data, uint8_t peek = 0); + + static bool getDataBuf(uint8_t sock, uint8_t *data, uint16_t *len); + + static bool insertDataBuf(uint8_t sock, const uint8_t *_data, uint16_t _dataLen);
+
+ static bool sendData(uint8_t sock, const uint8_t *data, uint16_t len); + + static bool sendUdpData(uint8_t sock);
+
+ static uint16_t availData(uint8_t sock); + + static uint8_t checkDataSent(uint8_t sock); +}; + +extern ServerDrv serverDrv; + +#endif diff --git a/libraries/WiFi/utility/socket.c b/libraries/WiFi/utility/socket.c new file mode 100644 index 0000000..665073b --- /dev/null +++ b/libraries/WiFi/utility/socket.c @@ -0,0 +1,20 @@ +/*
+*
+@file socket.c
+@brief define function of socket API
+*
+*/
+#include <inttypes.h>
+#include "socket.h"
+
+SOCKET socket(uint8 protocol) {return 0;} // Opens a socket(TCP or UDP or IP_RAW mode)
+void close(SOCKET s) {} // Close socket
+uint8 connect(SOCKET s, uint8 * addr, uint16 port) {return 0;} // Establish TCP connection (Active connection)
+void disconnect(SOCKET s) {} // disconnect the connection
+uint8 listen(SOCKET s) { return 0;} // Establish TCP connection (Passive connection)
+uint16 send(SOCKET s, const uint8 * buf, uint16 len) { return 0;} // Send data (TCP)
+uint16 recv(SOCKET s, uint8 * buf, uint16 len) {return 0;} // Receive data (TCP)
+uint16 sendto(SOCKET s, const uint8 * buf, uint16 len, uint8 * addr, uint16 port) {return 0;} // Send data (UDP/IP RAW)
+uint16 recvfrom(SOCKET s, uint8 * buf, uint16 len, uint8 * addr, uint16 *port) {return 0;} // Receive data (UDP/IP RAW)
+
+uint16 igmpsend(SOCKET s, const uint8 * buf, uint16 len) {return 0;}
diff --git a/libraries/WiFi/utility/socket.h b/libraries/WiFi/utility/socket.h new file mode 100644 index 0000000..9b06d00 --- /dev/null +++ b/libraries/WiFi/utility/socket.h @@ -0,0 +1,87 @@ +/*
+*
+@file socket.h
+@brief define function of socket API
+*
+*/
+
+#ifndef _SOCKET_H_
+#define _SOCKET_H_
+
+#define TCP_SOCKET 1
+#define UDP_SOCKET 2
+#define RAW_SOCKET 3
+
+#define SOCK_NOT_AVAIL 255
+
+#include "wl_definitions.h"
+/**
+ * The 8-bit signed data type.
+ */
+typedef char int8;
+/**
+ * The volatile 8-bit signed data type.
+ */
+typedef volatile char vint8;
+/**
+ * The 8-bit unsigned data type.
+ */
+typedef unsigned char uint8;
+/**
+ * The volatile 8-bit unsigned data type.
+ */
+typedef volatile unsigned char vuint8;
+
+/**
+ * The 16-bit signed data type.
+ */
+typedef int int16;
+/**
+ * The volatile 16-bit signed data type.
+ */
+typedef volatile int vint16;
+/**
+ * The 16-bit unsigned data type.
+ */
+typedef unsigned int uint16;
+/**
+ * The volatile 16-bit unsigned data type.
+ */
+typedef volatile unsigned int vuint16;
+/**
+ * The 32-bit signed data type.
+ */
+typedef long int32;
+/**
+ * The volatile 32-bit signed data type.
+ */
+typedef volatile long vint32;
+/**
+ * The 32-bit unsigned data type.
+ */
+typedef unsigned long uint32;
+/**
+ * The volatile 32-bit unsigned data type.
+ */
+typedef volatile unsigned long vuint32;
+
+/* bsd */
+typedef uint8 u_char; /**< 8-bit value */
+typedef uint16_t SOCKET;
+typedef uint16 u_short; /**< 16-bit value */
+typedef uint16 u_int; /**< 16-bit value */
+typedef uint32 u_long; /**< 32-bit value */
+
+extern SOCKET socket(uint8 protocol); // Opens a socket(TCP or UDP or IP_RAW mode)
+extern void close(SOCKET s); // Close socket
+extern uint8 connect(SOCKET s, uint8 * addr, uint16 port); // Establish TCP connection (Active connection)
+extern void disconnect(SOCKET s); // disconnect the connection
+extern uint8 listen(SOCKET s); // Establish TCP connection (Passive connection)
+extern uint16 send(SOCKET s, const uint8 * buf, uint16 len); // Send data (TCP)
+extern uint16 recv(SOCKET s, uint8 * buf, uint16 len); // Receive data (TCP)
+extern uint16 sendto(SOCKET s, const uint8 * buf, uint16 len, uint8 * addr, uint16 port); // Send data (UDP/IP RAW)
+extern uint16 recvfrom(SOCKET s, uint8 * buf, uint16 len, uint8 * addr, uint16 *port); // Receive data (UDP/IP RAW)
+
+extern uint16 igmpsend(SOCKET s, const uint8 * buf, uint16 len);
+#endif
+/* _SOCKET_H_ */
diff --git a/libraries/WiFi/utility/spi_drv.cpp b/libraries/WiFi/utility/spi_drv.cpp new file mode 100644 index 0000000..12a320b --- /dev/null +++ b/libraries/WiFi/utility/spi_drv.cpp @@ -0,0 +1,506 @@ + +#include "Arduino.h" +#include "spi_drv.h" +#include "pins_arduino.h" +//#define _DEBUG_ +extern "C" { +#include "debug.h" +} + +#define DATAOUT 11 // MOSI +#define DATAIN 12 // MISO +#define SPICLOCK 13 // sck +#define SLAVESELECT 10 // ss +#define SLAVEREADY 7 // handshake pin +#define WIFILED 9 // led on wifi shield + +#define DELAY_100NS do { asm volatile("nop"); }while(0); +#define DELAY_SPI(X) { int ii=0; do { asm volatile("nop"); }while(++ii<X);} +#define DELAY_TRANSFER() DELAY_SPI(10) + +void SpiDrv::begin() +{ + // Set direction register for SCK and MOSI pin. + // MISO pin automatically overrides to INPUT. + // When the SS pin is set as OUTPUT, it can be used as + // a general purpose output port (it doesn't influence + // SPI operations). + + pinMode(SCK, OUTPUT); + pinMode(MOSI, OUTPUT); + pinMode(SS, OUTPUT); + pinMode(SLAVESELECT, OUTPUT); + pinMode(SLAVEREADY, INPUT); + pinMode(WIFILED, OUTPUT); + + digitalWrite(SCK, LOW); + digitalWrite(MOSI, LOW); + digitalWrite(SS, HIGH); + digitalWrite(SLAVESELECT, HIGH); + digitalWrite(WIFILED, LOW); + +#ifdef _DEBUG_ + INIT_TRIGGER() +#endif + + // Warning: if the SS pin ever becomes a LOW INPUT then SPI + // automatically switches to Slave, so the data direction of + // the SS pin MUST be kept as OUTPUT. + SPCR |= _BV(MSTR); + SPCR |= _BV(SPE); + //SPSR |= _BV(SPI2X); +} + +void SpiDrv::end() { + SPCR &= ~_BV(SPE); +} + +void SpiDrv::spiSlaveSelect() +{ + digitalWrite(SLAVESELECT,LOW); +} + + +void SpiDrv::spiSlaveDeselect() +{ + digitalWrite(SLAVESELECT,HIGH); +} + +void delaySpi() +{ + int i = 0; + const int DELAY = 1000; + for (;i<DELAY;++i) + { + int a =a+1; + } +} + +char SpiDrv::spiTransfer(volatile char data) +{ + SPDR = data; // Start the transmission + while (!(SPSR & (1<<SPIF))) // Wait the end of the transmission + { + }; + char result = SPDR; + DELAY_TRANSFER(); + + return result; // return the received byte +} + +int SpiDrv::waitSpiChar(unsigned char waitChar) +{ + int timeout = TIMEOUT_CHAR; + unsigned char _readChar = 0; + do{ + _readChar = readChar(); //get data byte + if (_readChar == ERR_CMD) + { + WARN("Err cmd received\n"); + return -1; + } + }while((timeout-- > 0) && (_readChar != waitChar)); + return (_readChar == waitChar); +} + +int SpiDrv::readAndCheckChar(char checkChar, char* readChar) +{ + getParam((uint8_t*)readChar); + + return (*readChar == checkChar); +} + +char SpiDrv::readChar() +{ + uint8_t readChar = 0; + getParam(&readChar); + return readChar; +} + +#define WAIT_START_CMD(x) waitSpiChar(START_CMD) + +#define IF_CHECK_START_CMD(x) \ + if (!WAIT_START_CMD(_data)) \ + { \ + TOGGLE_TRIGGER() \ + WARN("Error waiting START_CMD"); \ + return 0; \ + }else \ + +#define CHECK_DATA(check, x) \ + if (!readAndCheckChar(check, &x)) \ + { \ + TOGGLE_TRIGGER() \ + WARN("Reply error"); \ + INFO2(check, (uint8_t)x); \ + return 0; \ + }else \ + +#define waitSlaveReady() (digitalRead(SLAVEREADY) == LOW) +#define waitSlaveSign() (digitalRead(SLAVEREADY) == HIGH) +#define waitSlaveSignalH() while(digitalRead(SLAVEREADY) != HIGH){} +#define waitSlaveSignalL() while(digitalRead(SLAVEREADY) != LOW){} + +void SpiDrv::waitForSlaveSign() +{ + while (!waitSlaveSign()); +} + +void SpiDrv::waitForSlaveReady() +{ + while (!waitSlaveReady()); +} + +void SpiDrv::getParam(uint8_t* param) +{ + // Get Params data + *param = spiTransfer(DUMMY_DATA); + DELAY_TRANSFER(); +} + +int SpiDrv::waitResponseCmd(uint8_t cmd, uint8_t numParam, uint8_t* param, uint8_t* param_len) +{ + char _data = 0; + int ii = 0; + + IF_CHECK_START_CMD(_data) + { + CHECK_DATA(cmd | REPLY_FLAG, _data){}; + + CHECK_DATA(numParam, _data); + { + readParamLen8(param_len); + for (ii=0; ii<(*param_len); ++ii) + { + // Get Params data + //param[ii] = spiTransfer(DUMMY_DATA); + getParam(¶m[ii]); + } + } + + readAndCheckChar(END_CMD, &_data); + } + + return 1; +} +/* +int SpiDrv::waitResponse(uint8_t cmd, uint8_t numParam, uint8_t* param, uint16_t* param_len) +{ + char _data = 0; + int i =0, ii = 0; + + IF_CHECK_START_CMD(_data) + { + CHECK_DATA(cmd | REPLY_FLAG, _data){}; + + CHECK_DATA(numParam, _data); + { + readParamLen16(param_len); + for (ii=0; ii<(*param_len); ++ii) + { + // Get Params data + param[ii] = spiTransfer(DUMMY_DATA); + } + } + + readAndCheckChar(END_CMD, &_data); + } + + return 1; +} +*/ + +int SpiDrv::waitResponseData16(uint8_t cmd, uint8_t* param, uint16_t* param_len) +{ + char _data = 0; + uint16_t ii = 0; + + IF_CHECK_START_CMD(_data) + { + CHECK_DATA(cmd | REPLY_FLAG, _data){}; + + uint8_t numParam = readChar(); + if (numParam != 0) + { + readParamLen16(param_len); + for (ii=0; ii<(*param_len); ++ii) + { + // Get Params data + param[ii] = spiTransfer(DUMMY_DATA); + } + } + + readAndCheckChar(END_CMD, &_data); + } + + return 1; +} + +int SpiDrv::waitResponseData8(uint8_t cmd, uint8_t* param, uint8_t* param_len) +{ + char _data = 0; + int ii = 0; + + IF_CHECK_START_CMD(_data) + { + CHECK_DATA(cmd | REPLY_FLAG, _data){}; + + uint8_t numParam = readChar(); + if (numParam != 0) + { + readParamLen8(param_len); + for (ii=0; ii<(*param_len); ++ii) + { + // Get Params data + param[ii] = spiTransfer(DUMMY_DATA); + } + } + + readAndCheckChar(END_CMD, &_data); + } + + return 1; +} + +int SpiDrv::waitResponseParams(uint8_t cmd, uint8_t numParam, tParam* params) +{ + char _data = 0; + int i =0, ii = 0; + + + IF_CHECK_START_CMD(_data) + { + CHECK_DATA(cmd | REPLY_FLAG, _data){}; + + uint8_t _numParam = readChar(); + if (_numParam != 0) + { + for (i=0; i<_numParam; ++i) + { + params[i].paramLen = readParamLen8(); + for (ii=0; ii<params[i].paramLen; ++ii) + { + // Get Params data + params[i].param[ii] = spiTransfer(DUMMY_DATA); + } + } + } else + { + WARN("Error numParam == 0"); + return 0; + } + + if (numParam != _numParam) + { + WARN("Mismatch numParam"); + return 0; + } + + readAndCheckChar(END_CMD, &_data); + } + return 1; +} + +/* +int SpiDrv::waitResponse(uint8_t cmd, tParam* params, uint8_t* numParamRead, uint8_t maxNumParams) +{ + char _data = 0; + int i =0, ii = 0; + + IF_CHECK_START_CMD(_data) + { + CHECK_DATA(cmd | REPLY_FLAG, _data){}; + + uint8_t numParam = readChar(); + + if (numParam > maxNumParams) + { + numParam = maxNumParams; + } + *numParamRead = numParam; + if (numParam != 0) + { + for (i=0; i<numParam; ++i) + { + params[i].paramLen = readParamLen8(); + + for (ii=0; ii<params[i].paramLen; ++ii) + { + // Get Params data + params[i].param[ii] = spiTransfer(DUMMY_DATA); + } + } + } else + { + WARN("Error numParams == 0"); + Serial.println(cmd, 16); + return 0; + } + readAndCheckChar(END_CMD, &_data); + } + return 1; +} +*/ + +int SpiDrv::waitResponse(uint8_t cmd, uint8_t* numParamRead, uint8_t** params, uint8_t maxNumParams) +{ + char _data = 0; + int i =0, ii = 0; + + char *index[WL_SSID_MAX_LENGTH]; + + for (i = 0 ; i < WL_NETWORKS_LIST_MAXNUM ; i++) + index[i] = (char *)params + WL_SSID_MAX_LENGTH*i; + + IF_CHECK_START_CMD(_data) + { + CHECK_DATA(cmd | REPLY_FLAG, _data){}; + + uint8_t numParam = readChar(); + + if (numParam > maxNumParams) + { + numParam = maxNumParams; + } + *numParamRead = numParam; + if (numParam != 0) + { + for (i=0; i<numParam; ++i) + { + uint8_t paramLen = readParamLen8(); + for (ii=0; ii<paramLen; ++ii) + { + //ssid[ii] = spiTransfer(DUMMY_DATA); + // Get Params data + index[i][ii] = (uint8_t)spiTransfer(DUMMY_DATA); + + } + index[i][ii]=0; + } + } else + { + WARN("Error numParams == 0"); + readAndCheckChar(END_CMD, &_data); + return 0; + } + readAndCheckChar(END_CMD, &_data); + } + return 1; +} + + +void SpiDrv::sendParam(uint8_t* param, uint8_t param_len, uint8_t lastParam) +{ + int i = 0; + // Send Spi paramLen + sendParamLen8(param_len); + + // Send Spi param data + for (i=0; i<param_len; ++i) + { + spiTransfer(param[i]); + } + + // if lastParam==1 Send Spi END CMD + if (lastParam == 1) + spiTransfer(END_CMD); +} + +void SpiDrv::sendParamLen8(uint8_t param_len) +{ + // Send Spi paramLen + spiTransfer(param_len); +} + +void SpiDrv::sendParamLen16(uint16_t param_len) +{ + // Send Spi paramLen + spiTransfer((uint8_t)((param_len & 0xff00)>>8)); + spiTransfer((uint8_t)(param_len & 0xff)); +} + +uint8_t SpiDrv::readParamLen8(uint8_t* param_len) +{ + uint8_t _param_len = spiTransfer(DUMMY_DATA); + if (param_len != NULL) + { + *param_len = _param_len; + } + return _param_len; +} + +uint16_t SpiDrv::readParamLen16(uint16_t* param_len) +{ + uint16_t _param_len = spiTransfer(DUMMY_DATA)<<8 | (spiTransfer(DUMMY_DATA)& 0xff); + if (param_len != NULL) + { + *param_len = _param_len; + } + return _param_len; +} + + +void SpiDrv::sendBuffer(uint8_t* param, uint16_t param_len, uint8_t lastParam) +{ + uint16_t i = 0; + + // Send Spi paramLen + sendParamLen16(param_len); + + // Send Spi param data + for (i=0; i<param_len; ++i) + { + spiTransfer(param[i]); + } + + // if lastParam==1 Send Spi END CMD + if (lastParam == 1) + spiTransfer(END_CMD); +} + + +void SpiDrv::sendParam(uint16_t param, uint8_t lastParam) +{ + // Send Spi paramLen + sendParamLen8(2); + + spiTransfer((uint8_t)((param & 0xff00)>>8)); + spiTransfer((uint8_t)(param & 0xff)); + + // if lastParam==1 Send Spi END CMD + if (lastParam == 1) + spiTransfer(END_CMD); +} + +/* Cmd Struct Message */ +/* _________________________________________________________________________________ */ +/*| START CMD | C/R | CMD |[TOT LEN]| N.PARAM | PARAM LEN | PARAM | .. | END CMD | */ +/*|___________|______|______|_________|_________|___________|________|____|_________| */ +/*| 8 bit | 1bit | 7bit | 8bit | 8bit | 8bit | nbytes | .. | 8bit | */ +/*|___________|______|______|_________|_________|___________|________|____|_________| */ + +void SpiDrv::sendCmd(uint8_t cmd, uint8_t numParam) +{ + // Send Spi START CMD + spiTransfer(START_CMD); + + //waitForSlaveSign(); + //wait the interrupt trigger on slave + delayMicroseconds(SPI_START_CMD_DELAY); + + // Send Spi C + cmd + spiTransfer(cmd & ~(REPLY_FLAG)); + + // Send Spi totLen + //spiTransfer(totLen); + + // Send Spi numParam + spiTransfer(numParam); + + // If numParam == 0 send END CMD + if (numParam == 0) + spiTransfer(END_CMD); + +} + +SpiDrv spiDrv; diff --git a/libraries/WiFi/utility/spi_drv.h b/libraries/WiFi/utility/spi_drv.h new file mode 100644 index 0000000..b7e4cb7 --- /dev/null +++ b/libraries/WiFi/utility/spi_drv.h @@ -0,0 +1,83 @@ +#ifndef SPI_Drv_h +#define SPI_Drv_h + +#include <inttypes.h> +#include "wifi_spi.h" + +#define SPI_START_CMD_DELAY 10
+ +#define NO_LAST_PARAM 0 +#define LAST_PARAM 1 + +#define DUMMY_DATA 0xFF + +#define WAIT_FOR_SLAVE_SELECT() \ + SpiDrv::waitForSlaveReady(); \ + SpiDrv::spiSlaveSelect(); + + + +class SpiDrv +{ +private: + //static bool waitSlaveReady(); + static void waitForSlaveSign(); + static void getParam(uint8_t* param); +public: + + static void begin(); + + static void end(); + + static void spiDriverInit(); + + static void spiSlaveSelect(); + + static void spiSlaveDeselect(); + + static char spiTransfer(volatile char data); + + static void waitForSlaveReady(); + + //static int waitSpiChar(char waitChar, char* readChar); + + static int waitSpiChar(unsigned char waitChar); + + static int readAndCheckChar(char checkChar, char* readChar); + + static char readChar(); + + static int waitResponseParams(uint8_t cmd, uint8_t numParam, tParam* params); + + static int waitResponseCmd(uint8_t cmd, uint8_t numParam, uint8_t* param, uint8_t* param_len); + + static int waitResponseData8(uint8_t cmd, uint8_t* param, uint8_t* param_len); + + static int waitResponseData16(uint8_t cmd, uint8_t* param, uint16_t* param_len); + /* + static int waitResponse(uint8_t cmd, tParam* params, uint8_t* numParamRead, uint8_t maxNumParams); + + static int waitResponse(uint8_t cmd, uint8_t numParam, uint8_t* param, uint16_t* param_len); +*/ + static int waitResponse(uint8_t cmd, uint8_t* numParamRead, uint8_t** params, uint8_t maxNumParams); + + static void sendParam(uint8_t* param, uint8_t param_len, uint8_t lastParam = NO_LAST_PARAM); + + static void sendParamLen8(uint8_t param_len); + + static void sendParamLen16(uint16_t param_len); + + static uint8_t readParamLen8(uint8_t* param_len = NULL); + + static uint16_t readParamLen16(uint16_t* param_len = NULL); + + static void sendBuffer(uint8_t* param, uint16_t param_len, uint8_t lastParam = NO_LAST_PARAM); + + static void sendParam(uint16_t param, uint8_t lastParam = NO_LAST_PARAM); + + static void sendCmd(uint8_t cmd, uint8_t numParam); +}; + +extern SpiDrv spiDrv; + +#endif diff --git a/libraries/WiFi/utility/wifi_drv.cpp b/libraries/WiFi/utility/wifi_drv.cpp new file mode 100644 index 0000000..ccd5f25 --- /dev/null +++ b/libraries/WiFi/utility/wifi_drv.cpp @@ -0,0 +1,560 @@ +#include <stdio.h> +#include <string.h> +#include <stdint.h> + +#include "Arduino.h" +#include "spi_drv.h" +#include "wifi_drv.h" + +#define _DEBUG_ + +extern "C" { +#include "wifi_spi.h" +#include "wl_types.h" +#include "debug.h" +} + +// Array of data to cache the information related to the networks discovered +char WiFiDrv::_networkSsid[][WL_SSID_MAX_LENGTH] = {{"1"},{"2"},{"3"},{"4"},{"5"}}; +int32_t WiFiDrv::_networkRssi[WL_NETWORKS_LIST_MAXNUM] = { 0 }; +uint8_t WiFiDrv::_networkEncr[WL_NETWORKS_LIST_MAXNUM] = { 0 }; + +// Cached values of retrieved data +char WiFiDrv::_ssid[] = {0}; +uint8_t WiFiDrv::_bssid[] = {0}; +uint8_t WiFiDrv::_mac[] = {0}; +uint8_t WiFiDrv::_localIp[] = {0}; +uint8_t WiFiDrv::_subnetMask[] = {0}; +uint8_t WiFiDrv::_gatewayIp[] = {0}; +// Firmware version +char WiFiDrv::fwVersion[] = {0}; + + +// Private Methods + +void WiFiDrv::getNetworkData(uint8_t *ip, uint8_t *mask, uint8_t *gwip) +{ + tParam params[PARAM_NUMS_3] = { {0, (char*)ip}, {0, (char*)mask}, {0, (char*)gwip}}; + + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_IPADDR_CMD, PARAM_NUMS_1); + + uint8_t _dummy = DUMMY_DATA; + SpiDrv::sendParam(&_dummy, sizeof(_dummy), LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + SpiDrv::waitResponseParams(GET_IPADDR_CMD, PARAM_NUMS_3, params); + + SpiDrv::spiSlaveDeselect(); +} + +void WiFiDrv::getRemoteData(uint8_t sock, uint8_t *ip, uint8_t *port)
+{
+ tParam params[PARAM_NUMS_2] = { {0, (char*)ip}, {0, (char*)port} };
+
+ WAIT_FOR_SLAVE_SELECT();
+
+ // Send Command
+ SpiDrv::sendCmd(GET_REMOTE_DATA_CMD, PARAM_NUMS_1);
+ SpiDrv::sendParam(&sock, sizeof(sock), LAST_PARAM);
+
+ //Wait the reply elaboration
+ SpiDrv::waitForSlaveReady();
+
+ // Wait for reply
+ SpiDrv::waitResponseParams(GET_REMOTE_DATA_CMD, PARAM_NUMS_2, params);
+
+ SpiDrv::spiSlaveDeselect();
+}
+
+
+// Public Methods + + +void WiFiDrv::wifiDriverInit() +{ + SpiDrv::begin(); +} + +int8_t WiFiDrv::wifiSetNetwork(char* ssid, uint8_t ssid_len) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(SET_NET_CMD, PARAM_NUMS_1); + SpiDrv::sendParam((uint8_t*)ssid, ssid_len, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(SET_NET_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + _data = WL_FAILURE; + } + SpiDrv::spiSlaveDeselect(); + + return(_data == WIFI_SPI_ACK) ? WL_SUCCESS : WL_FAILURE; +} + +int8_t WiFiDrv::wifiSetPassphrase(char* ssid, uint8_t ssid_len, const char *passphrase, const uint8_t len) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(SET_PASSPHRASE_CMD, PARAM_NUMS_2); + SpiDrv::sendParam((uint8_t*)ssid, ssid_len, NO_LAST_PARAM); + SpiDrv::sendParam((uint8_t*)passphrase, len, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(SET_PASSPHRASE_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + _data = WL_FAILURE; + } + SpiDrv::spiSlaveDeselect(); + return _data; +} + + +int8_t WiFiDrv::wifiSetKey(char* ssid, uint8_t ssid_len, uint8_t key_idx, const void *key, const uint8_t len) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(SET_KEY_CMD, PARAM_NUMS_3); + SpiDrv::sendParam((uint8_t*)ssid, ssid_len, NO_LAST_PARAM); + SpiDrv::sendParam(&key_idx, KEY_IDX_LEN, NO_LAST_PARAM); + SpiDrv::sendParam((uint8_t*)key, len, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(SET_KEY_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + _data = WL_FAILURE; + } + SpiDrv::spiSlaveDeselect(); + return _data; +} + +void WiFiDrv::config(uint8_t validParams, uint32_t local_ip, uint32_t gateway, uint32_t subnet) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(SET_IP_CONFIG_CMD, PARAM_NUMS_4); + SpiDrv::sendParam((uint8_t*)&validParams, 1, NO_LAST_PARAM); + SpiDrv::sendParam((uint8_t*)&local_ip, 4, NO_LAST_PARAM); + SpiDrv::sendParam((uint8_t*)&gateway, 4, NO_LAST_PARAM); + SpiDrv::sendParam((uint8_t*)&subnet, 4, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(SET_IP_CONFIG_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + _data = WL_FAILURE; + } + SpiDrv::spiSlaveDeselect(); +} + +void WiFiDrv::setDNS(uint8_t validParams, uint32_t dns_server1, uint32_t dns_server2) +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(SET_DNS_CONFIG_CMD, PARAM_NUMS_3); + SpiDrv::sendParam((uint8_t*)&validParams, 1, NO_LAST_PARAM); + SpiDrv::sendParam((uint8_t*)&dns_server1, 4, NO_LAST_PARAM); + SpiDrv::sendParam((uint8_t*)&dns_server2, 4, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(SET_DNS_CONFIG_CMD, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + _data = WL_FAILURE; + } + SpiDrv::spiSlaveDeselect(); +} + + + +int8_t WiFiDrv::disconnect() +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(DISCONNECT_CMD, PARAM_NUMS_1); + + uint8_t _dummy = DUMMY_DATA; + SpiDrv::sendParam(&_dummy, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + int8_t result = SpiDrv::waitResponseCmd(DISCONNECT_CMD, PARAM_NUMS_1, &_data, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return result; +} + +uint8_t WiFiDrv::getConnectionStatus() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_CONN_STATUS_CMD, PARAM_NUMS_0); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = -1; + uint8_t _dataLen = 0; + SpiDrv::waitResponseCmd(GET_CONN_STATUS_CMD, PARAM_NUMS_1, &_data, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return _data; +} + +uint8_t* WiFiDrv::getMacAddress() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_MACADDR_CMD, PARAM_NUMS_1); + + uint8_t _dummy = DUMMY_DATA; + SpiDrv::sendParam(&_dummy, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _dataLen = 0; + SpiDrv::waitResponseCmd(GET_MACADDR_CMD, PARAM_NUMS_1, _mac, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return _mac; +} + +void WiFiDrv::getIpAddress(IPAddress& ip) +{ + getNetworkData(_localIp, _subnetMask, _gatewayIp); + ip = _localIp; +} + + void WiFiDrv::getSubnetMask(IPAddress& mask) + { + getNetworkData(_localIp, _subnetMask, _gatewayIp); + mask = _subnetMask; + } + + void WiFiDrv::getGatewayIP(IPAddress& ip) + { + getNetworkData(_localIp, _subnetMask, _gatewayIp); + ip = _gatewayIp; + } + +char* WiFiDrv::getCurrentSSID() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_CURR_SSID_CMD, PARAM_NUMS_1); + + uint8_t _dummy = DUMMY_DATA; + SpiDrv::sendParam(&_dummy, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _dataLen = 0; + SpiDrv::waitResponseCmd(GET_CURR_SSID_CMD, PARAM_NUMS_1, (uint8_t*)_ssid, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return _ssid; +} + +uint8_t* WiFiDrv::getCurrentBSSID() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_CURR_BSSID_CMD, PARAM_NUMS_1); + + uint8_t _dummy = DUMMY_DATA; + SpiDrv::sendParam(&_dummy, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _dataLen = 0; + SpiDrv::waitResponseCmd(GET_CURR_BSSID_CMD, PARAM_NUMS_1, _bssid, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return _bssid; +} + +int32_t WiFiDrv::getCurrentRSSI() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_CURR_RSSI_CMD, PARAM_NUMS_1); + + uint8_t _dummy = DUMMY_DATA; + SpiDrv::sendParam(&_dummy, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _dataLen = 0; + int32_t rssi = 0; + SpiDrv::waitResponseCmd(GET_CURR_RSSI_CMD, PARAM_NUMS_1, (uint8_t*)&rssi, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return rssi; +} + +uint8_t WiFiDrv::getCurrentEncryptionType() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_CURR_ENCT_CMD, PARAM_NUMS_1); + + uint8_t _dummy = DUMMY_DATA; + SpiDrv::sendParam(&_dummy, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t dataLen = 0; + uint8_t encType = 0; + SpiDrv::waitResponseCmd(GET_CURR_ENCT_CMD, PARAM_NUMS_1, (uint8_t*)&encType, &dataLen); + + SpiDrv::spiSlaveDeselect(); + + return encType; +} + +int8_t WiFiDrv::startScanNetworks() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(START_SCAN_NETWORKS, PARAM_NUMS_0); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + + if (!SpiDrv::waitResponseCmd(START_SCAN_NETWORKS, PARAM_NUMS_1, &_data, &_dataLen)) + { + WARN("error waitResponse"); + _data = WL_FAILURE; + } + + SpiDrv::spiSlaveDeselect(); + + return (_data == WL_FAILURE)? _data : WL_SUCCESS; +} + + +uint8_t WiFiDrv::getScanNetworks() +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(SCAN_NETWORKS, PARAM_NUMS_0); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t ssidListNum = 0; + SpiDrv::waitResponse(SCAN_NETWORKS, &ssidListNum, (uint8_t**)_networkSsid, WL_NETWORKS_LIST_MAXNUM); + + SpiDrv::spiSlaveDeselect(); + + return ssidListNum; +} + +char* WiFiDrv::getSSIDNetoworks(uint8_t networkItem) +{ + if (networkItem >= WL_NETWORKS_LIST_MAXNUM) + return NULL; + + return _networkSsid[networkItem]; +} + +uint8_t WiFiDrv::getEncTypeNetowrks(uint8_t networkItem) +{ + if (networkItem >= WL_NETWORKS_LIST_MAXNUM) + return NULL; + + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_IDX_ENCT_CMD, PARAM_NUMS_1); + + SpiDrv::sendParam(&networkItem, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t dataLen = 0; + uint8_t encType = 0; + SpiDrv::waitResponseCmd(GET_IDX_ENCT_CMD, PARAM_NUMS_1, (uint8_t*)&encType, &dataLen); + + SpiDrv::spiSlaveDeselect(); + + return encType; +} + +int32_t WiFiDrv::getRSSINetoworks(uint8_t networkItem) +{ + if (networkItem >= WL_NETWORKS_LIST_MAXNUM) + return NULL; + int32_t networkRssi = 0; + + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(GET_IDX_RSSI_CMD, PARAM_NUMS_1); + + SpiDrv::sendParam(&networkItem, 1, LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t dataLen = 0; + SpiDrv::waitResponseCmd(GET_IDX_RSSI_CMD, PARAM_NUMS_1, (uint8_t*)&networkRssi, &dataLen); + + SpiDrv::spiSlaveDeselect(); + + return networkRssi; +} + +uint8_t WiFiDrv::reqHostByName(const char* aHostname) +{ + WAIT_FOR_SLAVE_SELECT(); + + // Send Command + SpiDrv::sendCmd(REQ_HOST_BY_NAME_CMD, PARAM_NUMS_1); + SpiDrv::sendParam((uint8_t*)aHostname, strlen(aHostname), LAST_PARAM); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _data = 0; + uint8_t _dataLen = 0; + uint8_t result = SpiDrv::waitResponseCmd(REQ_HOST_BY_NAME_CMD, PARAM_NUMS_1, &_data, &_dataLen); + + SpiDrv::spiSlaveDeselect(); + + return result; +} + +int WiFiDrv::getHostByName(IPAddress& aResult) +{ + uint8_t _ipAddr[WL_IPV4_LENGTH]; + IPAddress dummy(0xFF,0xFF,0xFF,0xFF); + int result = 0; + + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(GET_HOST_BY_NAME_CMD, PARAM_NUMS_0); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(GET_HOST_BY_NAME_CMD, PARAM_NUMS_1, _ipAddr, &_dataLen)) + { + WARN("error waitResponse"); + }else{ + aResult = _ipAddr; + result = (aResult != dummy); + } + SpiDrv::spiSlaveDeselect(); + return result; +} + +int WiFiDrv::getHostByName(const char* aHostname, IPAddress& aResult) +{ + uint8_t retry = 10; + if (reqHostByName(aHostname)) + { + while(!getHostByName(aResult) && --retry > 0) + { + delay(1000); + } + }else{ + return 0; + } + return (retry>0); +} + +char* WiFiDrv::getFwVersion() +{ + WAIT_FOR_SLAVE_SELECT(); + // Send Command + SpiDrv::sendCmd(GET_FW_VERSION_CMD, PARAM_NUMS_0); + + //Wait the reply elaboration + SpiDrv::waitForSlaveReady(); + + // Wait for reply + uint8_t _dataLen = 0; + if (!SpiDrv::waitResponseCmd(GET_FW_VERSION_CMD, PARAM_NUMS_1, (uint8_t*)fwVersion, &_dataLen)) + { + WARN("error waitResponse"); + } + SpiDrv::spiSlaveDeselect(); + return fwVersion; +} + +WiFiDrv wiFiDrv; diff --git a/libraries/WiFi/utility/wifi_drv.h b/libraries/WiFi/utility/wifi_drv.h new file mode 100644 index 0000000..d6ec029 --- /dev/null +++ b/libraries/WiFi/utility/wifi_drv.h @@ -0,0 +1,248 @@ +#ifndef WiFi_Drv_h +#define WiFi_Drv_h + +#include <inttypes.h> +#include "wifi_spi.h" +#include "IPAddress.h" +#include "../WiFiUdp.h"
+ +// Key index length +#define KEY_IDX_LEN 1 +// 5 secs of delay to have the connection established +#define WL_DELAY_START_CONNECTION 5000 +// firmware version string length +#define WL_FW_VER_LENGTH 6 + +class WiFiDrv +{ +private: + // settings of requested network + static char _networkSsid[WL_NETWORKS_LIST_MAXNUM][WL_SSID_MAX_LENGTH]; + static int32_t _networkRssi[WL_NETWORKS_LIST_MAXNUM]; + static uint8_t _networkEncr[WL_NETWORKS_LIST_MAXNUM]; + + // firmware version string in the format a.b.c + static char fwVersion[WL_FW_VER_LENGTH]; + + // settings of current selected network + static char _ssid[WL_SSID_MAX_LENGTH]; + static uint8_t _bssid[WL_MAC_ADDR_LENGTH]; + static uint8_t _mac[WL_MAC_ADDR_LENGTH]; + static uint8_t _localIp[WL_IPV4_LENGTH]; + static uint8_t _subnetMask[WL_IPV4_LENGTH]; + static uint8_t _gatewayIp[WL_IPV4_LENGTH]; + + /* + * Get network Data information + */ + static void getNetworkData(uint8_t *ip, uint8_t *mask, uint8_t *gwip); + + static uint8_t reqHostByName(const char* aHostname); + + static int getHostByName(IPAddress& aResult); + + /*
+ * Get remote Data information on UDP socket
+ */
+ static void getRemoteData(uint8_t sock, uint8_t *ip, uint8_t *port);
+
+public: + + /* + * Driver initialization + */ + static void wifiDriverInit(); + + /* + * Set the desired network which the connection manager should try to + * connect to. + * + * The ssid of the desired network should be specified. + * + * param ssid: The ssid of the desired network. + * param ssid_len: Lenght of ssid string. + * return: WL_SUCCESS or WL_FAILURE + */ + static int8_t wifiSetNetwork(char* ssid, uint8_t ssid_len); + + /* Start Wifi connection with passphrase + * the most secure supported mode will be automatically selected + * + * param ssid: Pointer to the SSID string. + * param ssid_len: Lenght of ssid string. + * param passphrase: Passphrase. Valid characters in a passphrase + * must be between ASCII 32-126 (decimal). + * param len: Lenght of passphrase string. + * return: WL_SUCCESS or WL_FAILURE + */ + static int8_t wifiSetPassphrase(char* ssid, uint8_t ssid_len, const char *passphrase, const uint8_t len); + + /* Start Wifi connection with WEP encryption. + * Configure a key into the device. The key type (WEP-40, WEP-104) + * is determined by the size of the key (5 bytes for WEP-40, 13 bytes for WEP-104). + * + * param ssid: Pointer to the SSID string. + * param ssid_len: Lenght of ssid string. + * param key_idx: The key index to set. Valid values are 0-3. + * param key: Key input buffer. + * param len: Lenght of key string. + * return: WL_SUCCESS or WL_FAILURE + */ + static int8_t wifiSetKey(char* ssid, uint8_t ssid_len, uint8_t key_idx, const void *key, const uint8_t len); + + /* Set ip configuration disabling dhcp client + * + * param validParams: set the number of parameters that we want to change + * i.e. validParams = 1 means that we'll change only ip address + * validParams = 3 means that we'll change ip address, gateway and netmask + * param local_ip: Static ip configuration + * param gateway: Static gateway configuration + * param subnet: Static subnet mask configuration + */ + static void config(uint8_t validParams, uint32_t local_ip, uint32_t gateway, uint32_t subnet); + + /* Set DNS ip configuration + * + * param validParams: set the number of parameters that we want to change + * i.e. validParams = 1 means that we'll change only dns_server1 + * validParams = 2 means that we'll change dns_server1 and dns_server2 + * param dns_server1: Static DNS server1 configuration + * param dns_server2: Static DNS server2 configuration + */ + static void setDNS(uint8_t validParams, uint32_t dns_server1, uint32_t dns_server2); + + /* + * Disconnect from the network + * + * return: WL_SUCCESS or WL_FAILURE + */ + static int8_t disconnect(); + + /* + * Disconnect from the network + * + * return: one value of wl_status_t enum + */ + static uint8_t getConnectionStatus(); + + /* + * Get the interface MAC address. + * + * return: pointer to uint8_t array with length WL_MAC_ADDR_LENGTH + */ + static uint8_t* getMacAddress(); + + /* + * Get the interface IP address. + * + * return: copy the ip address value in IPAddress object + */ + static void getIpAddress(IPAddress& ip); + + /* + * Get the interface subnet mask address. + * + * return: copy the subnet mask address value in IPAddress object + */ + static void getSubnetMask(IPAddress& mask); + + /* + * Get the gateway ip address. + * + * return: copy the gateway ip address value in IPAddress object + */ + static void getGatewayIP(IPAddress& ip); + + /* + * Return the current SSID associated with the network + * + * return: ssid string + */ + static char* getCurrentSSID(); + + /* + * Return the current BSSID associated with the network. + * It is the MAC address of the Access Point + * + * return: pointer to uint8_t array with length WL_MAC_ADDR_LENGTH + */ + static uint8_t* getCurrentBSSID(); + + /* + * Return the current RSSI /Received Signal Strength in dBm) + * associated with the network + * + * return: signed value + */ + static int32_t getCurrentRSSI(); + + /* + * Return the Encryption Type associated with the network + * + * return: one value of wl_enc_type enum + */ + static uint8_t getCurrentEncryptionType(); + + /* + * Start scan WiFi networks available + * + * return: Number of discovered networks + */ + static int8_t startScanNetworks(); + + /* + * Get the networks available + * + * return: Number of discovered networks + */ + static uint8_t getScanNetworks(); + + /* + * Return the SSID discovered during the network scan. + * + * param networkItem: specify from which network item want to get the information + * + * return: ssid string of the specified item on the networks scanned list + */ + static char* getSSIDNetoworks(uint8_t networkItem); + + /* + * Return the RSSI of the networks discovered during the scanNetworks + * + * param networkItem: specify from which network item want to get the information + * + * return: signed value of RSSI of the specified item on the networks scanned list + */ + static int32_t getRSSINetoworks(uint8_t networkItem); + + /* + * Return the encryption type of the networks discovered during the scanNetworks + * + * param networkItem: specify from which network item want to get the information + * + * return: encryption type (enum wl_enc_type) of the specified item on the networks scanned list + */ + static uint8_t getEncTypeNetowrks(uint8_t networkItem); + + /* + * Resolve the given hostname to an IP address. + * param aHostname: Name to be resolved + * param aResult: IPAddress structure to store the returned IP address + * result: 1 if aIPAddrString was successfully converted to an IP address, + * else error code + */ + static int getHostByName(const char* aHostname, IPAddress& aResult); + + /* + * Get the firmware version + * result: version as string with this format a.b.c + */ + static char* getFwVersion(); + + friend class WiFiUDP;
+
+}; + +extern WiFiDrv wiFiDrv; + +#endif diff --git a/libraries/WiFi/utility/wifi_spi.h b/libraries/WiFi/utility/wifi_spi.h new file mode 100644 index 0000000..8856e33 --- /dev/null +++ b/libraries/WiFi/utility/wifi_spi.h @@ -0,0 +1,153 @@ +#ifndef WiFi_Spi_h +#define WiFi_Spi_h + +#include "wl_definitions.h" + +#define CMD_FLAG 0 +#define REPLY_FLAG 1<<7 +#define DATA_FLAG 0x40 + +#define WIFI_SPI_ACK 1 +#define WIFI_SPI_ERR 0xFF + +#define TIMEOUT_CHAR 1000 + +//#define MAX_SOCK_NUM 4 /**< Maxmium number of socket */ +#define NO_SOCKET_AVAIL 255 + +#define START_CMD 0xE0 +#define END_CMD 0xEE +#define ERR_CMD 0xEF +#define CMD_POS 1 // Position of Command OpCode on SPI stream +#define PARAM_LEN_POS 2 // Position of Param len on SPI stream + + +enum { + SET_NET_CMD = 0x10, + SET_PASSPHRASE_CMD = 0x11, + SET_KEY_CMD = 0x12, + TEST_CMD = 0x13, + SET_IP_CONFIG_CMD = 0x14, + SET_DNS_CONFIG_CMD = 0x15, + + GET_CONN_STATUS_CMD = 0x20, + GET_IPADDR_CMD = 0x21, + GET_MACADDR_CMD = 0x22, + GET_CURR_SSID_CMD = 0x23, + GET_CURR_BSSID_CMD = 0x24, + GET_CURR_RSSI_CMD = 0x25, + GET_CURR_ENCT_CMD = 0x26, + SCAN_NETWORKS = 0x27, + START_SERVER_TCP_CMD= 0x28, + GET_STATE_TCP_CMD = 0x29, + DATA_SENT_TCP_CMD = 0x2A, + AVAIL_DATA_TCP_CMD = 0x2B, + GET_DATA_TCP_CMD = 0x2C, + START_CLIENT_TCP_CMD= 0x2D, + STOP_CLIENT_TCP_CMD = 0x2E, + GET_CLIENT_STATE_TCP_CMD= 0x2F, + DISCONNECT_CMD = 0x30, + GET_IDX_SSID_CMD = 0x31, + GET_IDX_RSSI_CMD = 0x32, + GET_IDX_ENCT_CMD = 0x33, + REQ_HOST_BY_NAME_CMD= 0x34, + GET_HOST_BY_NAME_CMD= 0x35, + START_SCAN_NETWORKS = 0x36, + GET_FW_VERSION_CMD = 0x37, + GET_TEST_CMD = 0x38, + SEND_DATA_UDP_CMD = 0x39, + GET_REMOTE_DATA_CMD = 0x3A,
+ + // All command with DATA_FLAG 0x40 send a 16bit Len + + SEND_DATA_TCP_CMD = 0x44, + GET_DATABUF_TCP_CMD = 0x45, + INSERT_DATABUF_CMD = 0x46, +}; + + +enum wl_tcp_state { + CLOSED = 0, + LISTEN = 1, + SYN_SENT = 2, + SYN_RCVD = 3, + ESTABLISHED = 4, + FIN_WAIT_1 = 5, + FIN_WAIT_2 = 6, + CLOSE_WAIT = 7, + CLOSING = 8, + LAST_ACK = 9, + TIME_WAIT = 10 +}; + + +enum numParams{ + PARAM_NUMS_0, + PARAM_NUMS_1, + PARAM_NUMS_2, + PARAM_NUMS_3, + PARAM_NUMS_4, + PARAM_NUMS_5, + MAX_PARAM_NUMS +}; + +#define MAX_PARAMS MAX_PARAM_NUMS-1 +#define PARAM_LEN_SIZE 1 + +typedef struct __attribute__((__packed__)) +{ + uint8_t paramLen; + char* param; +}tParam; + +typedef struct __attribute__((__packed__)) +{ + uint16_t dataLen; + char* data; +}tDataParam; + + +typedef struct __attribute__((__packed__)) +{ + unsigned char cmd; + unsigned char tcmd; + unsigned char nParam; + tParam params[MAX_PARAMS]; +}tSpiMsg; + +typedef struct __attribute__((__packed__)) +{ + unsigned char cmd; + unsigned char tcmd; + unsigned char nParam; + tDataParam params[MAX_PARAMS]; +}tSpiMsgData; + + +typedef struct __attribute__((__packed__)) +{ + unsigned char cmd; + unsigned char tcmd; + //unsigned char totLen; + unsigned char nParam; +}tSpiHdr; + +typedef struct __attribute__((__packed__)) +{ + uint8_t paramLen; + uint32_t param; +}tLongParam; + +typedef struct __attribute__((__packed__)) +{ + uint8_t paramLen; + uint16_t param; +}tIntParam; + +typedef struct __attribute__((__packed__)) +{ + uint8_t paramLen; + uint8_t param; +}tByteParam; + +#endif diff --git a/libraries/WiFi/utility/wl_definitions.h b/libraries/WiFi/utility/wl_definitions.h new file mode 100644 index 0000000..1ec8e71 --- /dev/null +++ b/libraries/WiFi/utility/wl_definitions.h @@ -0,0 +1,52 @@ +/* + * wl_definitions.h + * + * Created on: Mar 6, 2011 + * Author: dlafauci + */ + +#ifndef WL_DEFINITIONS_H_ +#define WL_DEFINITIONS_H_ + +// Maximum size of a SSID +#define WL_SSID_MAX_LENGTH 32 +// Length of passphrase. Valid lengths are 8-63. +#define WL_WPA_KEY_MAX_LENGTH 63 +// Length of key in bytes. Valid values are 5 and 13. +#define WL_WEP_KEY_MAX_LENGTH 13 +// Size of a MAC-address or BSSID +#define WL_MAC_ADDR_LENGTH 6 +// Size of a MAC-address or BSSID +#define WL_IPV4_LENGTH 4 +// Maximum size of a SSID list +#define WL_NETWORKS_LIST_MAXNUM 10 +// Maxmium number of socket +#define MAX_SOCK_NUM 4 +// Default state value for Wifi state field +#define NA_STATE -1 +//Maximum number of attempts to establish wifi connection +#define WL_MAX_ATTEMPT_CONNECTION 10 + +typedef enum { + WL_NO_SHIELD = 255, + WL_IDLE_STATUS = 0, + WL_NO_SSID_AVAIL, + WL_SCAN_COMPLETED, + WL_CONNECTED, + WL_CONNECT_FAILED, + WL_CONNECTION_LOST, + WL_DISCONNECTED +} wl_status_t; + +/* Encryption modes */ +enum wl_enc_type { /* Values map to 802.11 encryption suites... */ + ENC_TYPE_WEP = 5, + ENC_TYPE_TKIP = 2, + ENC_TYPE_CCMP = 4, + /* ... except these two, 7 and 8 are reserved in 802.11-2007 */ + ENC_TYPE_NONE = 7, + ENC_TYPE_AUTO = 8 +}; + + +#endif /* WL_DEFINITIONS_H_ */ diff --git a/libraries/WiFi/utility/wl_types.h b/libraries/WiFi/utility/wl_types.h new file mode 100644 index 0000000..82b309d --- /dev/null +++ b/libraries/WiFi/utility/wl_types.h @@ -0,0 +1,31 @@ +/*
+ * wl_types.h
+ *
+ * Created on: Jul 30, 2010
+ * Author: dlafauci
+ */
+
+
+#ifndef _WL_TYPES_H_
+#define _WL_TYPES_H_
+
+#include <inttypes.h>
+
+typedef enum {
+ WL_FAILURE = -1,
+ WL_SUCCESS = 1,
+} wl_error_code_t;
+
+/* Authentication modes */
+enum wl_auth_mode {
+ AUTH_MODE_INVALID,
+ AUTH_MODE_AUTO,
+ AUTH_MODE_OPEN_SYSTEM,
+ AUTH_MODE_SHARED_KEY,
+ AUTH_MODE_WPA,
+ AUTH_MODE_WPA2,
+ AUTH_MODE_WPA_PSK,
+ AUTH_MODE_WPA2_PSK
+};
+
+#endif //_WL_TYPES_H_
diff --git a/libraries/Wire/Wire.cpp b/libraries/Wire/Wire.cpp new file mode 100644 index 0000000..4e7a17c --- /dev/null +++ b/libraries/Wire/Wire.cpp @@ -0,0 +1,298 @@ +/* + TwoWire.cpp - TWI/I2C library for Wiring & Arduino + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts +*/ + +extern "C" { + #include <stdlib.h> + #include <string.h> + #include <inttypes.h> + #include "twi.h" +} + +#include "Wire.h" + +// Initialize Class Variables ////////////////////////////////////////////////// + +uint8_t TwoWire::rxBuffer[BUFFER_LENGTH]; +uint8_t TwoWire::rxBufferIndex = 0; +uint8_t TwoWire::rxBufferLength = 0; + +uint8_t TwoWire::txAddress = 0; +uint8_t TwoWire::txBuffer[BUFFER_LENGTH]; +uint8_t TwoWire::txBufferIndex = 0; +uint8_t TwoWire::txBufferLength = 0; + +uint8_t TwoWire::transmitting = 0; +void (*TwoWire::user_onRequest)(void); +void (*TwoWire::user_onReceive)(int); + +// Constructors //////////////////////////////////////////////////////////////// + +TwoWire::TwoWire() +{ +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void TwoWire::begin(void) +{ + rxBufferIndex = 0; + rxBufferLength = 0; + + txBufferIndex = 0; + txBufferLength = 0; + + twi_init(); +} + +void TwoWire::begin(uint8_t address) +{ + twi_setAddress(address); + twi_attachSlaveTxEvent(onRequestService); + twi_attachSlaveRxEvent(onReceiveService); + begin(); +} + +void TwoWire::begin(int address) +{ + begin((uint8_t)address); +} + +uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity, uint8_t sendStop) +{ + // clamp to buffer length + if(quantity > BUFFER_LENGTH){ + quantity = BUFFER_LENGTH; + } + // perform blocking read into buffer + uint8_t read = twi_readFrom(address, rxBuffer, quantity, sendStop); + // set rx buffer iterator vars + rxBufferIndex = 0; + rxBufferLength = read; + + return read; +} + +uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity) +{ + return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)true); +} + +uint8_t TwoWire::requestFrom(int address, int quantity) +{ + return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)true); +} + +uint8_t TwoWire::requestFrom(int address, int quantity, int sendStop) +{ + return requestFrom((uint8_t)address, (uint8_t)quantity, (uint8_t)sendStop); +} + +void TwoWire::beginTransmission(uint8_t address) +{ + // indicate that we are transmitting + transmitting = 1; + // set address of targeted slave + txAddress = address; + // reset tx buffer iterator vars + txBufferIndex = 0; + txBufferLength = 0; +} + +void TwoWire::beginTransmission(int address) +{ + beginTransmission((uint8_t)address); +} + +// +// Originally, 'endTransmission' was an f(void) function. +// It has been modified to take one parameter indicating +// whether or not a STOP should be performed on the bus. +// Calling endTransmission(false) allows a sketch to +// perform a repeated start. +// +// WARNING: Nothing in the library keeps track of whether +// the bus tenure has been properly ended with a STOP. It +// is very possible to leave the bus in a hung state if +// no call to endTransmission(true) is made. Some I2C +// devices will behave oddly if they do not see a STOP. +// +uint8_t TwoWire::endTransmission(uint8_t sendStop) +{ + // transmit buffer (blocking) + int8_t ret = twi_writeTo(txAddress, txBuffer, txBufferLength, 1, sendStop); + // reset tx buffer iterator vars + txBufferIndex = 0; + txBufferLength = 0; + // indicate that we are done transmitting + transmitting = 0; + return ret; +} + +// This provides backwards compatibility with the original +// definition, and expected behaviour, of endTransmission +// +uint8_t TwoWire::endTransmission(void) +{ + return endTransmission(true); +} + +// must be called in: +// slave tx event callback +// or after beginTransmission(address) +size_t TwoWire::write(uint8_t data) +{ + if(transmitting){ + // in master transmitter mode + // don't bother if buffer is full + if(txBufferLength >= BUFFER_LENGTH){ + setWriteError(); + return 0; + } + // put byte in tx buffer + txBuffer[txBufferIndex] = data; + ++txBufferIndex; + // update amount in buffer + txBufferLength = txBufferIndex; + }else{ + // in slave send mode + // reply to master + twi_transmit(&data, 1); + } + return 1; +} + +// must be called in: +// slave tx event callback +// or after beginTransmission(address) +size_t TwoWire::write(const uint8_t *data, size_t quantity) +{ + if(transmitting){ + // in master transmitter mode + for(size_t i = 0; i < quantity; ++i){ + write(data[i]); + } + }else{ + // in slave send mode + // reply to master + twi_transmit(data, quantity); + } + return quantity; +} + +// must be called in: +// slave rx event callback +// or after requestFrom(address, numBytes) +int TwoWire::available(void) +{ + return rxBufferLength - rxBufferIndex; +} + +// must be called in: +// slave rx event callback +// or after requestFrom(address, numBytes) +int TwoWire::read(void) +{ + int value = -1; + + // get each successive byte on each call + if(rxBufferIndex < rxBufferLength){ + value = rxBuffer[rxBufferIndex]; + ++rxBufferIndex; + } + + return value; +} + +// must be called in: +// slave rx event callback +// or after requestFrom(address, numBytes) +int TwoWire::peek(void) +{ + int value = -1; + + if(rxBufferIndex < rxBufferLength){ + value = rxBuffer[rxBufferIndex]; + } + + return value; +} + +void TwoWire::flush(void) +{ + // XXX: to be implemented. +} + +// behind the scenes function that is called when data is received +void TwoWire::onReceiveService(uint8_t* inBytes, int numBytes) +{ + // don't bother if user hasn't registered a callback + if(!user_onReceive){ + return; + } + // don't bother if rx buffer is in use by a master requestFrom() op + // i know this drops data, but it allows for slight stupidity + // meaning, they may not have read all the master requestFrom() data yet + if(rxBufferIndex < rxBufferLength){ + return; + } + // copy twi rx buffer into local read buffer + // this enables new reads to happen in parallel + for(uint8_t i = 0; i < numBytes; ++i){ + rxBuffer[i] = inBytes[i]; + } + // set rx iterator vars + rxBufferIndex = 0; + rxBufferLength = numBytes; + // alert user program + user_onReceive(numBytes); +} + +// behind the scenes function that is called when data is requested +void TwoWire::onRequestService(void) +{ + // don't bother if user hasn't registered a callback + if(!user_onRequest){ + return; + } + // reset tx buffer iterator vars + // !!! this will kill any pending pre-master sendTo() activity + txBufferIndex = 0; + txBufferLength = 0; + // alert user program + user_onRequest(); +} + +// sets function called on slave write +void TwoWire::onReceive( void (*function)(int) ) +{ + user_onReceive = function; +} + +// sets function called on slave read +void TwoWire::onRequest( void (*function)(void) ) +{ + user_onRequest = function; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// + +TwoWire Wire = TwoWire(); + diff --git a/libraries/Wire/Wire.h b/libraries/Wire/Wire.h new file mode 100644 index 0000000..a93d0f5 --- /dev/null +++ b/libraries/Wire/Wire.h @@ -0,0 +1,79 @@ +/* + TwoWire.h - TWI/I2C library for Arduino & Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts +*/ + +#ifndef TwoWire_h +#define TwoWire_h + +#include <inttypes.h> +#include "Stream.h" + +#define BUFFER_LENGTH 32 + +class TwoWire : public Stream +{ + private: + static uint8_t rxBuffer[]; + static uint8_t rxBufferIndex; + static uint8_t rxBufferLength; + + static uint8_t txAddress; + static uint8_t txBuffer[]; + static uint8_t txBufferIndex; + static uint8_t txBufferLength; + + static uint8_t transmitting; + static void (*user_onRequest)(void); + static void (*user_onReceive)(int); + static void onRequestService(void); + static void onReceiveService(uint8_t*, int); + public: + TwoWire(); + void begin(); + void begin(uint8_t); + void begin(int); + void beginTransmission(uint8_t); + void beginTransmission(int); + uint8_t endTransmission(void); + uint8_t endTransmission(uint8_t); + uint8_t requestFrom(uint8_t, uint8_t); + uint8_t requestFrom(uint8_t, uint8_t, uint8_t); + uint8_t requestFrom(int, int); + uint8_t requestFrom(int, int, int); + virtual size_t write(uint8_t); + virtual size_t write(const uint8_t *, size_t); + virtual int available(void); + virtual int read(void); + virtual int peek(void); + virtual void flush(void); + void onReceive( void (*)(int) ); + void onRequest( void (*)(void) ); + + inline size_t write(unsigned long n) { return write((uint8_t)n); } + inline size_t write(long n) { return write((uint8_t)n); } + inline size_t write(unsigned int n) { return write((uint8_t)n); } + inline size_t write(int n) { return write((uint8_t)n); } + using Print::write; +}; + +extern TwoWire Wire; + +#endif + diff --git a/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino new file mode 100644 index 0000000..9c41c18 --- /dev/null +++ b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino @@ -0,0 +1,87 @@ +// I2C SRF10 or SRF08 Devantech Ultrasonic Ranger Finder +// by Nicholas Zambetti <http://www.zambetti.com> +// and James Tichenor <http://www.jamestichenor.net> + +// Demonstrates use of the Wire library reading data from the +// Devantech Utrasonic Rangers SFR08 and SFR10 + +// Created 29 April 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) + Serial.begin(9600); // start serial communication at 9600bps +} + +int reading = 0; + +void loop() +{ + // step 1: instruct sensor to read echoes + Wire.beginTransmission(112); // transmit to device #112 (0x70) + // the address specified in the datasheet is 224 (0xE0) + // but i2c adressing uses the high 7 bits so it's 112 + Wire.write(byte(0x00)); // sets register pointer to the command register (0x00) + Wire.write(byte(0x50)); // command sensor to measure in "inches" (0x50) + // use 0x51 for centimeters + // use 0x52 for ping microseconds + Wire.endTransmission(); // stop transmitting + + // step 2: wait for readings to happen + delay(70); // datasheet suggests at least 65 milliseconds + + // step 3: instruct sensor to return a particular echo reading + Wire.beginTransmission(112); // transmit to device #112 + Wire.write(byte(0x02)); // sets register pointer to echo #1 register (0x02) + Wire.endTransmission(); // stop transmitting + + // step 4: request reading from sensor + Wire.requestFrom(112, 2); // request 2 bytes from slave device #112 + + // step 5: receive reading from sensor + if(2 <= Wire.available()) // if two bytes were received + { + reading = Wire.read(); // receive high byte (overwrites previous reading) + reading = reading << 8; // shift high byte to be high 8 bits + reading |= Wire.read(); // receive low byte as lower 8 bits + Serial.println(reading); // print the reading + } + + delay(250); // wait a bit since people have to read the output :) +} + + +/* + +// The following code changes the address of a Devantech Ultrasonic Range Finder (SRF10 or SRF08) +// usage: changeAddress(0x70, 0xE6); + +void changeAddress(byte oldAddress, byte newAddress) +{ + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(byte(0xA0)); + Wire.endTransmission(); + + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(byte(0xAA)); + Wire.endTransmission(); + + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(byte(0xA5)); + Wire.endTransmission(); + + Wire.beginTransmission(oldAddress); + Wire.write(byte(0x00)); + Wire.write(newAddress); + Wire.endTransmission(); +} + +*/ diff --git a/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino b/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino new file mode 100644 index 0000000..38da1c5 --- /dev/null +++ b/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino @@ -0,0 +1,39 @@ +// I2C Digital Potentiometer +// by Nicholas Zambetti <http://www.zambetti.com> +// and Shawn Bonkowski <http://people.interaction-ivrea.it/s.bonkowski/> + +// Demonstrates use of the Wire library +// Controls AD5171 digital potentiometer via I2C/TWI + +// Created 31 March 2006 + +// This example code is in the public domain. + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) +} + +byte val = 0; + +void loop() +{ + Wire.beginTransmission(44); // transmit to device #44 (0x2c) + // device address is specified in datasheet + Wire.write(byte(0x00)); // sends instruction byte + Wire.write(val); // sends potentiometer value byte + Wire.endTransmission(); // stop transmitting + + val++; // increment value + if(val == 64) // if reached 64th position (max) + { + val = 0; // start over from lowest value + } + delay(500); +} + diff --git a/libraries/Wire/examples/master_reader/master_reader.ino b/libraries/Wire/examples/master_reader/master_reader.ino new file mode 100644 index 0000000..4124d7d --- /dev/null +++ b/libraries/Wire/examples/master_reader/master_reader.ino @@ -0,0 +1,32 @@ +// Wire Master Reader +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Reads data from an I2C/TWI slave device +// Refer to the "Wire Slave Sender" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) + Serial.begin(9600); // start serial for output +} + +void loop() +{ + Wire.requestFrom(2, 6); // request 6 bytes from slave device #2 + + while(Wire.available()) // slave may send less than requested + { + char c = Wire.read(); // receive a byte as character + Serial.print(c); // print the character + } + + delay(500); +} diff --git a/libraries/Wire/examples/master_writer/master_writer.ino b/libraries/Wire/examples/master_writer/master_writer.ino new file mode 100644 index 0000000..ccaa036 --- /dev/null +++ b/libraries/Wire/examples/master_writer/master_writer.ino @@ -0,0 +1,31 @@ +// Wire Master Writer +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Writes data to an I2C/TWI slave device +// Refer to the "Wire Slave Receiver" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(); // join i2c bus (address optional for master) +} + +byte x = 0; + +void loop() +{ + Wire.beginTransmission(4); // transmit to device #4 + Wire.write("x is "); // sends five bytes + Wire.write(x); // sends one byte + Wire.endTransmission(); // stop transmitting + + x++; + delay(500); +} diff --git a/libraries/Wire/examples/slave_receiver/slave_receiver.ino b/libraries/Wire/examples/slave_receiver/slave_receiver.ino new file mode 100644 index 0000000..60dd4bd --- /dev/null +++ b/libraries/Wire/examples/slave_receiver/slave_receiver.ino @@ -0,0 +1,38 @@ +// Wire Slave Receiver +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Receives data as an I2C/TWI slave device +// Refer to the "Wire Master Writer" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(4); // join i2c bus with address #4 + Wire.onReceive(receiveEvent); // register event + Serial.begin(9600); // start serial for output +} + +void loop() +{ + delay(100); +} + +// function that executes whenever data is received from master +// this function is registered as an event, see setup() +void receiveEvent(int howMany) +{ + while(1 < Wire.available()) // loop through all but the last + { + char c = Wire.read(); // receive byte as a character + Serial.print(c); // print the character + } + int x = Wire.read(); // receive byte as an integer + Serial.println(x); // print the integer +} diff --git a/libraries/Wire/examples/slave_sender/slave_sender.ino b/libraries/Wire/examples/slave_sender/slave_sender.ino new file mode 100644 index 0000000..d3b238a --- /dev/null +++ b/libraries/Wire/examples/slave_sender/slave_sender.ino @@ -0,0 +1,32 @@ +// Wire Slave Sender +// by Nicholas Zambetti <http://www.zambetti.com> + +// Demonstrates use of the Wire library +// Sends data as an I2C/TWI slave device +// Refer to the "Wire Master Reader" example for use with this + +// Created 29 March 2006 + +// This example code is in the public domain. + + +#include <Wire.h> + +void setup() +{ + Wire.begin(2); // join i2c bus with address #2 + Wire.onRequest(requestEvent); // register event +} + +void loop() +{ + delay(100); +} + +// function that executes whenever data is requested by master +// this function is registered as an event, see setup() +void requestEvent() +{ + Wire.write("hello "); // respond with message of 6 bytes + // as expected by master +} diff --git a/libraries/Wire/keywords.txt b/libraries/Wire/keywords.txt new file mode 100644 index 0000000..12f129b --- /dev/null +++ b/libraries/Wire/keywords.txt @@ -0,0 +1,31 @@ +####################################### +# Syntax Coloring Map For Wire +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +beginTransmission KEYWORD2 +endTransmission KEYWORD2 +requestFrom KEYWORD2 +send KEYWORD2 +receive KEYWORD2 +onReceive KEYWORD2 +onRequest KEYWORD2 + +####################################### +# Instances (KEYWORD2) +####################################### + +Wire KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/libraries/Wire/utility/twi.c b/libraries/Wire/utility/twi.c new file mode 100644 index 0000000..201d7d1 --- /dev/null +++ b/libraries/Wire/utility/twi.c @@ -0,0 +1,527 @@ +/* + twi.c - TWI/I2C library for Wiring & Arduino + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 2012 by Todd Krein (todd@krein.org) to implement repeated starts +*/ + +#include <math.h> +#include <stdlib.h> +#include <inttypes.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <compat/twi.h> +#include "Arduino.h" // for digitalWrite + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#include "pins_arduino.h" +#include "twi.h" + +static volatile uint8_t twi_state; +static volatile uint8_t twi_slarw; +static volatile uint8_t twi_sendStop; // should the transaction end with a stop +static volatile uint8_t twi_inRepStart; // in the middle of a repeated start + +static void (*twi_onSlaveTransmit)(void); +static void (*twi_onSlaveReceive)(uint8_t*, int); + +static uint8_t twi_masterBuffer[TWI_BUFFER_LENGTH]; +static volatile uint8_t twi_masterBufferIndex; +static volatile uint8_t twi_masterBufferLength; + +static uint8_t twi_txBuffer[TWI_BUFFER_LENGTH]; +static volatile uint8_t twi_txBufferIndex; +static volatile uint8_t twi_txBufferLength; + +static uint8_t twi_rxBuffer[TWI_BUFFER_LENGTH]; +static volatile uint8_t twi_rxBufferIndex; + +static volatile uint8_t twi_error; + +/* + * Function twi_init + * Desc readys twi pins and sets twi bitrate + * Input none + * Output none + */ +void twi_init(void) +{ + // initialize state + twi_state = TWI_READY; + twi_sendStop = true; // default value + twi_inRepStart = false; + + // activate internal pullups for twi. + digitalWrite(SDA, 1); + digitalWrite(SCL, 1); + + // initialize twi prescaler and bit rate + cbi(TWSR, TWPS0); + cbi(TWSR, TWPS1); + TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; + + /* twi bit rate formula from atmega128 manual pg 204 + SCL Frequency = CPU Clock Frequency / (16 + (2 * TWBR)) + note: TWBR should be 10 or higher for master mode + It is 72 for a 16mhz Wiring board with 100kHz TWI */ + + // enable twi module, acks, and twi interrupt + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA); +} + +/* + * Function twi_slaveInit + * Desc sets slave address and enables interrupt + * Input none + * Output none + */ +void twi_setAddress(uint8_t address) +{ + // set twi slave address (skip over TWGCE bit) + TWAR = address << 1; +} + +/* + * Function twi_readFrom + * Desc attempts to become twi bus master and read a + * series of bytes from a device on the bus + * Input address: 7bit i2c device address + * data: pointer to byte array + * length: number of bytes to read into array + * sendStop: Boolean indicating whether to send a stop at the end + * Output number of bytes read + */ +uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length, uint8_t sendStop) +{ + uint8_t i; + + // ensure data will fit into buffer + if(TWI_BUFFER_LENGTH < length){ + return 0; + } + + // wait until twi is ready, become master receiver + while(TWI_READY != twi_state){ + continue; + } + twi_state = TWI_MRX; + twi_sendStop = sendStop; + // reset error state (0xFF.. no error occured) + twi_error = 0xFF; + + // initialize buffer iteration vars + twi_masterBufferIndex = 0; + twi_masterBufferLength = length-1; // This is not intuitive, read on... + // On receive, the previously configured ACK/NACK setting is transmitted in + // response to the received byte before the interrupt is signalled. + // Therefor we must actually set NACK when the _next_ to last byte is + // received, causing that NACK to be sent in response to receiving the last + // expected byte of data. + + // build sla+w, slave device address + w bit + twi_slarw = TW_READ; + twi_slarw |= address << 1; + + if (true == twi_inRepStart) { + // if we're in the repeated start state, then we've already sent the start, + // (@@@ we hope), and the TWI statemachine is just waiting for the address byte. + // We need to remove ourselves from the repeated start state before we enable interrupts, + // since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning + // up. Also, don't enable the START interrupt. There may be one pending from the + // repeated start that we sent outselves, and that would really confuse things. + twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR + TWDR = twi_slarw; + TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START + } + else + // send start condition + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA); + + // wait for read operation to complete + while(TWI_MRX == twi_state){ + continue; + } + + if (twi_masterBufferIndex < length) + length = twi_masterBufferIndex; + + // copy twi buffer to data + for(i = 0; i < length; ++i){ + data[i] = twi_masterBuffer[i]; + } + + return length; +} + +/* + * Function twi_writeTo + * Desc attempts to become twi bus master and write a + * series of bytes to a device on the bus + * Input address: 7bit i2c device address + * data: pointer to byte array + * length: number of bytes in array + * wait: boolean indicating to wait for write or not + * sendStop: boolean indicating whether or not to send a stop at the end + * Output 0 .. success + * 1 .. length to long for buffer + * 2 .. address send, NACK received + * 3 .. data send, NACK received + * 4 .. other twi error (lost bus arbitration, bus error, ..) + */ +uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait, uint8_t sendStop) +{ + uint8_t i; + + // ensure data will fit into buffer + if(TWI_BUFFER_LENGTH < length){ + return 1; + } + + // wait until twi is ready, become master transmitter + while(TWI_READY != twi_state){ + continue; + } + twi_state = TWI_MTX; + twi_sendStop = sendStop; + // reset error state (0xFF.. no error occured) + twi_error = 0xFF; + + // initialize buffer iteration vars + twi_masterBufferIndex = 0; + twi_masterBufferLength = length; + + // copy data to twi buffer + for(i = 0; i < length; ++i){ + twi_masterBuffer[i] = data[i]; + } + + // build sla+w, slave device address + w bit + twi_slarw = TW_WRITE; + twi_slarw |= address << 1; + + // if we're in a repeated start, then we've already sent the START + // in the ISR. Don't do it again. + // + if (true == twi_inRepStart) { + // if we're in the repeated start state, then we've already sent the start, + // (@@@ we hope), and the TWI statemachine is just waiting for the address byte. + // We need to remove ourselves from the repeated start state before we enable interrupts, + // since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning + // up. Also, don't enable the START interrupt. There may be one pending from the + // repeated start that we sent outselves, and that would really confuse things. + twi_inRepStart = false; // remember, we're dealing with an ASYNC ISR + TWDR = twi_slarw; + TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE); // enable INTs, but not START + } + else + // send start condition + TWCR = _BV(TWINT) | _BV(TWEA) | _BV(TWEN) | _BV(TWIE) | _BV(TWSTA); // enable INTs + + // wait for write operation to complete + while(wait && (TWI_MTX == twi_state)){ + continue; + } + + if (twi_error == 0xFF) + return 0; // success + else if (twi_error == TW_MT_SLA_NACK) + return 2; // error: address send, nack received + else if (twi_error == TW_MT_DATA_NACK) + return 3; // error: data send, nack received + else + return 4; // other twi error +} + +/* + * Function twi_transmit + * Desc fills slave tx buffer with data + * must be called in slave tx event callback + * Input data: pointer to byte array + * length: number of bytes in array + * Output 1 length too long for buffer + * 2 not slave transmitter + * 0 ok + */ +uint8_t twi_transmit(const uint8_t* data, uint8_t length) +{ + uint8_t i; + + // ensure data will fit into buffer + if(TWI_BUFFER_LENGTH < length){ + return 1; + } + + // ensure we are currently a slave transmitter + if(TWI_STX != twi_state){ + return 2; + } + + // set length and copy data into tx buffer + twi_txBufferLength = length; + for(i = 0; i < length; ++i){ + twi_txBuffer[i] = data[i]; + } + + return 0; +} + +/* + * Function twi_attachSlaveRxEvent + * Desc sets function called before a slave read operation + * Input function: callback function to use + * Output none + */ +void twi_attachSlaveRxEvent( void (*function)(uint8_t*, int) ) +{ + twi_onSlaveReceive = function; +} + +/* + * Function twi_attachSlaveTxEvent + * Desc sets function called before a slave write operation + * Input function: callback function to use + * Output none + */ +void twi_attachSlaveTxEvent( void (*function)(void) ) +{ + twi_onSlaveTransmit = function; +} + +/* + * Function twi_reply + * Desc sends byte or readys receive line + * Input ack: byte indicating to ack or to nack + * Output none + */ +void twi_reply(uint8_t ack) +{ + // transmit master read ready signal, with or without ack + if(ack){ + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA); + }else{ + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT); + } +} + +/* + * Function twi_stop + * Desc relinquishes bus master status + * Input none + * Output none + */ +void twi_stop(void) +{ + // send stop condition + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO); + + // wait for stop condition to be exectued on bus + // TWINT is not set after a stop condition! + while(TWCR & _BV(TWSTO)){ + continue; + } + + // update twi state + twi_state = TWI_READY; +} + +/* + * Function twi_releaseBus + * Desc releases bus control + * Input none + * Output none + */ +void twi_releaseBus(void) +{ + // release bus + TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT); + + // update twi state + twi_state = TWI_READY; +} + +ISR(TWI_vect) +{ + switch(TW_STATUS){ + // All Master + case TW_START: // sent start condition + case TW_REP_START: // sent repeated start condition + // copy device address and r/w bit to output register and ack + TWDR = twi_slarw; + twi_reply(1); + break; + + // Master Transmitter + case TW_MT_SLA_ACK: // slave receiver acked address + case TW_MT_DATA_ACK: // slave receiver acked data + // if there is data to send, send it, otherwise stop + if(twi_masterBufferIndex < twi_masterBufferLength){ + // copy data to output register and ack + TWDR = twi_masterBuffer[twi_masterBufferIndex++]; + twi_reply(1); + }else{ + if (twi_sendStop) + twi_stop(); + else { + twi_inRepStart = true; // we're gonna send the START + // don't enable the interrupt. We'll generate the start, but we + // avoid handling the interrupt until we're in the next transaction, + // at the point where we would normally issue the start. + TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ; + twi_state = TWI_READY; + } + } + break; + case TW_MT_SLA_NACK: // address sent, nack received + twi_error = TW_MT_SLA_NACK; + twi_stop(); + break; + case TW_MT_DATA_NACK: // data sent, nack received + twi_error = TW_MT_DATA_NACK; + twi_stop(); + break; + case TW_MT_ARB_LOST: // lost bus arbitration + twi_error = TW_MT_ARB_LOST; + twi_releaseBus(); + break; + + // Master Receiver + case TW_MR_DATA_ACK: // data received, ack sent + // put byte into buffer + twi_masterBuffer[twi_masterBufferIndex++] = TWDR; + case TW_MR_SLA_ACK: // address sent, ack received + // ack if more bytes are expected, otherwise nack + if(twi_masterBufferIndex < twi_masterBufferLength){ + twi_reply(1); + }else{ + twi_reply(0); + } + break; + case TW_MR_DATA_NACK: // data received, nack sent + // put final byte into buffer + twi_masterBuffer[twi_masterBufferIndex++] = TWDR; + if (twi_sendStop) + twi_stop(); + else { + twi_inRepStart = true; // we're gonna send the START + // don't enable the interrupt. We'll generate the start, but we + // avoid handling the interrupt until we're in the next transaction, + // at the point where we would normally issue the start. + TWCR = _BV(TWINT) | _BV(TWSTA)| _BV(TWEN) ; + twi_state = TWI_READY; + } + break; + case TW_MR_SLA_NACK: // address sent, nack received + twi_stop(); + break; + // TW_MR_ARB_LOST handled by TW_MT_ARB_LOST case + + // Slave Receiver + case TW_SR_SLA_ACK: // addressed, returned ack + case TW_SR_GCALL_ACK: // addressed generally, returned ack + case TW_SR_ARB_LOST_SLA_ACK: // lost arbitration, returned ack + case TW_SR_ARB_LOST_GCALL_ACK: // lost arbitration, returned ack + // enter slave receiver mode + twi_state = TWI_SRX; + // indicate that rx buffer can be overwritten and ack + twi_rxBufferIndex = 0; + twi_reply(1); + break; + case TW_SR_DATA_ACK: // data received, returned ack + case TW_SR_GCALL_DATA_ACK: // data received generally, returned ack + // if there is still room in the rx buffer + if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){ + // put byte in buffer and ack + twi_rxBuffer[twi_rxBufferIndex++] = TWDR; + twi_reply(1); + }else{ + // otherwise nack + twi_reply(0); + } + break; + case TW_SR_STOP: // stop or repeated start condition received + // put a null char after data if there's room + if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){ + twi_rxBuffer[twi_rxBufferIndex] = '\0'; + } + // sends ack and stops interface for clock stretching + twi_stop(); + // callback to user defined callback + twi_onSlaveReceive(twi_rxBuffer, twi_rxBufferIndex); + // since we submit rx buffer to "wire" library, we can reset it + twi_rxBufferIndex = 0; + // ack future responses and leave slave receiver state + twi_releaseBus(); + break; + case TW_SR_DATA_NACK: // data received, returned nack + case TW_SR_GCALL_DATA_NACK: // data received generally, returned nack + // nack back at master + twi_reply(0); + break; + + // Slave Transmitter + case TW_ST_SLA_ACK: // addressed, returned ack + case TW_ST_ARB_LOST_SLA_ACK: // arbitration lost, returned ack + // enter slave transmitter mode + twi_state = TWI_STX; + // ready the tx buffer index for iteration + twi_txBufferIndex = 0; + // set tx buffer length to be zero, to verify if user changes it + twi_txBufferLength = 0; + // request for txBuffer to be filled and length to be set + // note: user must call twi_transmit(bytes, length) to do this + twi_onSlaveTransmit(); + // if they didn't change buffer & length, initialize it + if(0 == twi_txBufferLength){ + twi_txBufferLength = 1; + twi_txBuffer[0] = 0x00; + } + // transmit first byte from buffer, fall + case TW_ST_DATA_ACK: // byte sent, ack returned + // copy data to output register + TWDR = twi_txBuffer[twi_txBufferIndex++]; + // if there is more to send, ack, otherwise nack + if(twi_txBufferIndex < twi_txBufferLength){ + twi_reply(1); + }else{ + twi_reply(0); + } + break; + case TW_ST_DATA_NACK: // received nack, we are done + case TW_ST_LAST_DATA: // received ack, but we are done already! + // ack future responses + twi_reply(1); + // leave slave receiver state + twi_state = TWI_READY; + break; + + // All + case TW_NO_INFO: // no state information + break; + case TW_BUS_ERROR: // bus error, illegal stop/start + twi_error = TW_BUS_ERROR; + twi_stop(); + break; + } +} + diff --git a/libraries/Wire/utility/twi.h b/libraries/Wire/utility/twi.h new file mode 100644 index 0000000..6526593 --- /dev/null +++ b/libraries/Wire/utility/twi.h @@ -0,0 +1,53 @@ +/* + twi.h - TWI/I2C library for Wiring & Arduino + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef twi_h +#define twi_h + + #include <inttypes.h> + + //#define ATMEGA8 + + #ifndef TWI_FREQ + #define TWI_FREQ 100000L + #endif + + #ifndef TWI_BUFFER_LENGTH + #define TWI_BUFFER_LENGTH 32 + #endif + + #define TWI_READY 0 + #define TWI_MRX 1 + #define TWI_MTX 2 + #define TWI_SRX 3 + #define TWI_STX 4 + + void twi_init(void); + void twi_setAddress(uint8_t); + uint8_t twi_readFrom(uint8_t, uint8_t*, uint8_t, uint8_t); + uint8_t twi_writeTo(uint8_t, uint8_t*, uint8_t, uint8_t, uint8_t); + uint8_t twi_transmit(const uint8_t*, uint8_t); + void twi_attachSlaveRxEvent( void (*)(uint8_t*, int) ); + void twi_attachSlaveTxEvent( void (*)(void) ); + void twi_reply(uint8_t); + void twi_stop(void); + void twi_releaseBus(void); + +#endif + diff --git a/platform.txt b/platform.txt new file mode 100644 index 0000000..a6cd314 --- /dev/null +++ b/platform.txt @@ -0,0 +1,75 @@ + +# AVR compile variables +# --------------------- + +name=Arduino AVR Boards +# Default "compiler.path" is correct, change only if you want to overidde the initial value +#compiler.path={ide.path}/tools/avr/bin/.. +compiler.c.cmd=avr-gcc +compiler.c.flags=-c -g -Os -w -ffunction-sections -fdata-sections -MMD +compiler.c.elf.flags=-Os -Wl,--gc-sections +compiler.c.elf.cmd=avr-gcc +compiler.S.flags=-c -g -assembler-with-cpp +compiler.cpp.cmd=avr-g++ +compiler.cpp.flags=-c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -MMD +compiler.ar.cmd=avr-ar +compiler.ar.flags=rcs +compiler.objcopy.cmd=avr-objcopy +compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 +compiler.elf2hex.flags=-O ihex -R .eeprom +compiler.elf2hex.cmd=avr-objcopy +compiler.ldflags= +compiler.size.cmd=avr-size +# this can be overriden in boards.txt +build.extra_flags= + +# AVR compile patterns +# -------------------- + +## Compile c files +recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -D{software}={runtime.ide.version} -D{build.board} -DARDUINO_ARCH_{build.arch} {build.extra_flags} {includes} "{source_file}" -o "{object_file}" + +## Compile c++ files +recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -D{software}={runtime.ide.version} -D{build.board} -DARDUINO_ARCH_{build.arch} {build.extra_flags} {includes} "{source_file}" -o "{object_file}" + +## Create archives +recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} "{build.path}/{archive_file}" "{object_file}" + +## Combine gc-sections, archives, and objects +recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" {compiler.c.elf.flags} -mmcu={build.mcu} -o "{build.path}/{build.project_name}.elf" {object_files} "{build.path}/{archive_file}" "-L{build.path}" -lm + +## Create eeprom +recipe.objcopy.eep.pattern="{compiler.path}{compiler.objcopy.cmd}" {compiler.objcopy.eep.flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.eep" + +## Create hex +recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex" + +## Compute size +recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.hex" +recipe.size.regex=Total\s+([0-9]+).* + + +# AVR Uploader/Programmers tools +# ------------------- + +tools.avrdude.cmd.path={runtime.ide.path}/hardware/tools/avr/bin/avrdude +tools.avrdude.config.path={runtime.ide.path}/hardware/tools/avr/etc/avrdude.conf +tools.avrdude.cmd.path.linux={runtime.ide.path}/hardware/tools/avrdude +tools.avrdude.config.path.linux={runtime.ide.path}/hardware/tools/avrdude.conf + +tools.avrdude.upload.params.verbose=-v -v -v -v +tools.avrdude.upload.params.quiet=-q -q +tools.avrdude.upload.pattern="{cmd.path}" "-C{config.path}" {upload.verbose} -p{build.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} -D "-Uflash:w:{build.path}/{build.project_name}.hex:i" + +tools.avrdude.program.params.verbose=-v -v -v -v +tools.avrdude.program.params.quiet=-q -q +tools.avrdude.program.pattern="{cmd.path}" "-C{config.path}" {program.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{build.path}/{build.project_name}.hex:i" + +tools.avrdude.erase.params.verbose=-v -v -v -v +tools.avrdude.erase.params.quiet=-q -q +tools.avrdude.erase.pattern="{cmd.path}" "-C{config.path}" {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Ulock:w:{bootloader.unlock_bits}:m -Uefuse:w:{bootloader.extended_fuses}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m + +tools.avrdude.bootloader.params.verbose=-v -v -v -v +tools.avrdude.bootloader.params.quiet=-q -q +tools.avrdude.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{runtime.ide.path}/hardware/arduino/avr/bootloaders/{bootloader.file}:i" -Ulock:w:{bootloader.lock_bits}:m + diff --git a/programmers.txt b/programmers.txt index c34b88c..65d8cdb 100644 --- a/programmers.txt +++ b/programmers.txt @@ -1,26 +1,41 @@ -# See: http://code.google.com/p/arduino/wiki/Platforms - avrisp.name=AVR ISP avrisp.communication=serial avrisp.protocol=stk500v1 +avrisp.program.protocol=stk500v1 +avrisp.program.tool=avrdude +avrisp.program.extra_params=-P{serial.port} avrispmkii.name=AVRISP mkII avrispmkii.communication=usb avrispmkii.protocol=stk500v2 +avrispmkii.program.protocol=stk500v2 +avrispmkii.program.tool=avrdude +avrispmkii.program.extra_params=-Pusb usbtinyisp.name=USBtinyISP usbtinyisp.protocol=usbtiny +usbtinyisp.program.tool=avrdude +usbtinyisp.program.extra_params= usbasp.name=USBasp usbasp.communication=usb usbasp.protocol=usbasp +usbasp.program.protocol=usbasp +usbasp.program.tool=avrdude +usbasp.program.extra_params=-Pusb parallel.name=Parallel Programmer parallel.protocol=dapa parallel.force=true # parallel.delay=200 +parallel.program.tool=avrdude +parallel.program.extra_params=-F arduinoisp.name=Arduino as ISP arduinoisp.communication=serial arduinoisp.protocol=stk500v1 -arduinoisp.speed=19200 +arduinoisp.speed=9600 +arduinoisp.program.protocol=stk500v1 +arduinoisp.program.speed=9600 +arduinoisp.program.tool=avrdude +arduinoisp.program.extra_params=-P{serial.port} -b{program.speed} |