diff options
| -rw-r--r-- | libraries/Temboo/Temboo.cpp | 64 | ||||
| -rw-r--r-- | libraries/Temboo/Temboo.h | 44 | ||||
| -rw-r--r-- | libraries/Temboo/examples/GetYahooWeatherReport/GetYahooWeatherReport.ino | 115 | ||||
| -rw-r--r-- | libraries/Temboo/examples/GetYahooWeatherReport/TembooAccount.h | 4 |
4 files changed, 227 insertions, 0 deletions
diff --git a/libraries/Temboo/Temboo.cpp b/libraries/Temboo/Temboo.cpp new file mode 100644 index 0000000..1e5e539 --- /dev/null +++ b/libraries/Temboo/Temboo.cpp @@ -0,0 +1,64 @@ +/* +############################################################################### +# +# Temboo Arduino Yun library +# +# Copyright 2013, Temboo Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the License. +# +############################################################################### +*/ + +#include <Temboo.h> + +void TembooChoreo::begin() { + Process::begin("temboo"); +} + +void TembooChoreo::setAccountName(const String& accountName) { + addParameter("-a" + accountName); +} + +void TembooChoreo::setAppKeyName(const String& appKeyName) { + addParameter("-u" + appKeyName); +} + +void TembooChoreo::setAppKey(const String& appKey) { + addParameter("-p" + appKey); +} + +void TembooChoreo::setChoreo(const String& choreo) { + addParameter("-c" + choreo); +} + +void TembooChoreo::setCredential(const String& credentialName) { + addParameter("-e" + credentialName); +} + +void TembooChoreo::addInput(const String& inputName, const String& inputValue) { + addParameter("-i" + inputName + ":" + inputValue); +} + +void TembooChoreo::addOutputFilter(const String& outputName, const String& filterPath, const String& variableName) { + addParameter("-o" + outputName + ":" + filterPath + ":" + variableName); +} + +void TembooChoreo::setSettingsFileToWrite(const String& filePath) { + addParameter("-w" + filePath); +} + +void TembooChoreo::setSettingsFileToRead(const String& filePath) { + addParameter("-r" + filePath); +} + diff --git a/libraries/Temboo/Temboo.h b/libraries/Temboo/Temboo.h new file mode 100644 index 0000000..2420c86 --- /dev/null +++ b/libraries/Temboo/Temboo.h @@ -0,0 +1,44 @@ +/* +############################################################################### +# +# Temboo Arduino Yun library +# +# Copyright 2013, Temboo Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, +# either express or implied. See the License for the specific +# language governing permissions and limitations under the License. +# +############################################################################### +*/ + +#ifndef _TEMBOO_H +#define _TEMBOO_H +#include <Arduino.h> +#include <Process.h> + +class TembooChoreo : public Process { + + public: + void begin(); + void setAccountName(const String& accountName); + void setAppKeyName(const String& appKeyName); + void setAppKey(const String& appKey); + void setChoreo(const String& choreo); + void setCredential(const String& credentialName); + void addInput(const String& inputName, const String& inputValue); + void addOutputFilter(const String& filterName, const String& filterPath, const String& variableName); + void setSettingsFileToWrite(const String& filePath); + void setSettingsFileToRead(const String& filePath); + +}; + +#endif diff --git a/libraries/Temboo/examples/GetYahooWeatherReport/GetYahooWeatherReport.ino b/libraries/Temboo/examples/GetYahooWeatherReport/GetYahooWeatherReport.ino new file mode 100644 index 0000000..e198ee6 --- /dev/null +++ b/libraries/Temboo/examples/GetYahooWeatherReport/GetYahooWeatherReport.ino @@ -0,0 +1,115 @@ +/* + GetYahooWeatherReport + + Demonstrates making a request to the Yahoo! Weather API using the Temboo Arduino Yun SDK. + + Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino + + A Temboo account and application key are necessary to run all Temboo examples. + If you don't already have one, you can register for a free Temboo account at + http://www.temboo.com + + This example assumes basic familiarity with Arduino sketches, and that your Yun is connected + to the Internet. + + Looking for another API? We've got over 100 in our Library! + + This example code is in the public domain. +*/ + +#include <Bridge.h> +#include <Temboo.h> +#include "TembooAccount.h" // contains Temboo account information + // as described in the footer comment below + + +// the address for which a weather forecast will be retrieved +String ADDRESS_FOR_FORECAST = "104 Franklin St., New York NY 10013"; + +int numRuns = 1; // execution count, so that this doesn't run forever +int maxRuns = 10; // max number of times the Yahoo WeatherByAddress Choreo should be run + + +void setup() { + Serial.begin(9600); + + // for debugging, wait until a serial console is connected + delay(4000); + while(!Serial); + Bridge.begin(); + +} + +void loop() +{ + // while we haven't reached the max number of runs... + if (numRuns <= maxRuns) { + + // print status + Serial.println("Running GetWeatherByAddress - Run #" + String(numRuns++) + "..."); + + // create a TembooChoreo object to send a Choreo request to Temboo + TembooChoreo GetWeatherByAddressChoreo; + + // invoke the Temboo client + GetWeatherByAddressChoreo.begin(); + + // add your temboo account info + GetWeatherByAddressChoreo.setAccountName(TEMBOO_ACCOUNT); + GetWeatherByAddressChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); + GetWeatherByAddressChoreo.setAppKey(TEMBOO_APP_KEY); + + // set the name of the choreo we want to run + GetWeatherByAddressChoreo.setChoreo("/Library/Yahoo/Weather/GetWeatherByAddress"); + + // set choreo inputs; in this case, the address for which to retrieve weather data + // the Temboo client provides standardized calls to 100+ cloud APIs + GetWeatherByAddressChoreo.addInput("Address", ADDRESS_FOR_FORECAST); + + // add an output filter to extract the name of the city. + GetWeatherByAddressChoreo.addOutputFilter("city", "/rss/channel/yweather:location/@city", "Response"); + + // add an output filter to extract the current temperature + GetWeatherByAddressChoreo.addOutputFilter("temperature", "/rss/channel/item/yweather:condition/@temp", "Response"); + + // add an output filter to extract the date and time of the last report. + GetWeatherByAddressChoreo.addOutputFilter("date", "/rss/channel/item/yweather:condition/@date", "Response"); + + // run the choreo + GetWeatherByAddressChoreo.run(); + + // when the choreo results are available, print them to the serial monitor + while(GetWeatherByAddressChoreo.available()) { + + char c = GetWeatherByAddressChoreo.read(); + Serial.print(c); + } + GetWeatherByAddressChoreo.close(); + + } + + Serial.println("Waiting..."); + Serial.println(""); + delay(30000); // wait 30 seconds between GetWeatherByAddress calls +} + +/* + IMPORTANT NOTE: TembooAccount.h: + + TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. + You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, + by inserting your own Temboo account name and app key information. The contents of the file should + look like: + + #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name + #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name + #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key + + You can find your Temboo App Key information on the Temboo website, + under My Account > Application Keys + + The same TembooAccount.h file settings can be used for all Temboo SDK sketches. + + Keeping your account information in a separate file means you can save it once, + then just distribute the main .ino file without worrying that you forgot to delete your credentials. +*/ diff --git a/libraries/Temboo/examples/GetYahooWeatherReport/TembooAccount.h b/libraries/Temboo/examples/GetYahooWeatherReport/TembooAccount.h new file mode 100644 index 0000000..c58b447 --- /dev/null +++ b/libraries/Temboo/examples/GetYahooWeatherReport/TembooAccount.h @@ -0,0 +1,4 @@ +#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name +#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name +#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key + |