Moving hardware/targets to hardware/cores.

1 files changed, 0 insertions, 98 deletions

diff --git a/targets/arduino/WInterrupts.c b/targets/arduino/WInterrupts.c
deleted file mode 100755
index 38992ee..0000000
--- a/targets/arduino/WInterrupts.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
-
-/*
-  Part of the Wiring project - http://wiring.uniandes.edu.co
-
-  Copyright (c) 2004-05 Hernando Barragan
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-  
-  Modified 24 November 2006 by David A. Mellis
-*/
-
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/signal.h>
-#include <avr/pgmspace.h>
-#include <stdio.h>
-
-#include "WConstants.h"
-#include "wiring_private.h"
-
-volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
-// volatile static voidFuncPtr twiIntFunc;
-
-#if defined(__AVR_ATmega168__)
-#define MCUCR EICRA
-#define GICR EIMSK
-#endif
-
-void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
-  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
-    intFunc[interruptNum] = userFunc;
-    
-    if (interruptNum == 0) {
-      // Configure the interrupt mode (trigger on low input, any change, rising
-      // edge, or falling edge).  The mode constants were chosen to correspond
-      // to the configuration bits in the hardware register, so we simply shift
-      // the mode into place.
-      MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
-      
-      // Enable the interrupt.
-      GICR |= (1 << INT0);
-    } else {
-      MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
-      GICR |= (1 << INT1);
-    }
-  }
-}
-
-void detachInterrupt(uint8_t interruptNum) {
-  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
-    if (interruptNum == 0)
-      // Disable the interrupt.
-      GICR &= ~(1 << INT0);
-    else
-      GICR &= ~(1 << INT1);
-      
-    intFunc[interruptNum] = 0;
-  }
-}
-
-/*
-void attachInterruptTwi(void (*userFunc)(void) ) {
-  twiIntFunc = userFunc;
-}
-*/
-
-SIGNAL(SIG_INTERRUPT0) {
-  if(intFunc[EXTERNAL_INT_0])
-    intFunc[EXTERNAL_INT_0]();
-}
-
-SIGNAL(SIG_INTERRUPT1) {
-  if(intFunc[EXTERNAL_INT_1])
-    intFunc[EXTERNAL_INT_1]();
-}
-
-/*
-SIGNAL(SIG_2WIRE_SERIAL) {
-  if(twiIntFunc)
-    twiIntFunc();
-}
-*/
-