updated Firmata library to version 2.3.5 and moved to the new library format

17 files changed, 0 insertions, 3927 deletions

diff --git a/libraries/Firmata/Boards.h b/libraries/Firmata/Boards.h
deleted file mode 100644
index 06f69c6..0000000
--- a/libraries/Firmata/Boards.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Boards.h - Hardware Abstraction Layer for Firmata library */
-
-#ifndef Firmata_Boards_h
-#define Firmata_Boards_h
-
-#include <inttypes.h>
-
-#if defined(ARDUINO) && ARDUINO >= 100
-#include "Arduino.h"	// for digitalRead, digitalWrite, etc
-#else
-#include "WProgram.h"
-#endif
-
-// Normally Servo.h must be included before Firmata.h (which then includes
-// this file).  If Servo.h wasn't included, this allows the code to still
-// compile, but without support for any Servos.  Hopefully that's what the
-// user intended by not including Servo.h
-#ifndef MAX_SERVOS
-#define MAX_SERVOS 0
-#endif
-
-/*
-    Firmata Hardware Abstraction Layer
-
-Firmata is built on top of the hardware abstraction functions of Arduino,
-specifically digitalWrite, digitalRead, analogWrite, analogRead, and 
-pinMode.  While these functions offer simple integer pin numbers, Firmata
-needs more information than is provided by Arduino.  This file provides
-all other hardware specific details.  To make Firmata support a new board,
-only this file should require editing.
-
-The key concept is every "pin" implemented by Firmata may be mapped to
-any pin as implemented by Arduino.  Usually a simple 1-to-1 mapping is
-best, but such mapping should not be assumed.  This hardware abstraction
-layer allows Firmata to implement any number of pins which map onto the
-Arduino implemented pins in almost any arbitrary way.
-
-
-General Constants:
-
-These constants provide basic information Firmata requires.
-
-TOTAL_PINS: The total number of pins Firmata implemented by Firmata.
-    Usually this will match the number of pins the Arduino functions
-    implement, including any pins pins capable of analog or digital.
-    However, Firmata may implement any number of pins.  For example,
-    on Arduino Mini with 8 analog inputs, 6 of these may be used
-    for digital functions, and 2 are analog only.  On such boards,
-    Firmata can implement more pins than Arduino's pinMode()
-    function, in order to accommodate those special pins.  The
-    Firmata protocol supports a maximum of 128 pins, so this
-    constant must not exceed 128.
-
-TOTAL_ANALOG_PINS: The total number of analog input pins implemented.
-    The Firmata protocol allows up to 16 analog inputs, accessed
-    using offsets 0 to 15.  Because Firmata presents the analog
-    inputs using different offsets than the actual pin numbers
-    (a legacy of Arduino's analogRead function, and the way the
-    analog input capable pins are physically labeled on all
-    Arduino boards), the total number of analog input signals
-    must be specified.  16 is the maximum.
-
-VERSION_BLINK_PIN: When Firmata starts up, it will blink the version
-    number.  This constant is the Arduino pin number where a
-    LED is connected.
-
-
-Pin Mapping Macros:
-
-These macros provide the mapping between pins as implemented by
-Firmata protocol and the actual pin numbers used by the Arduino
-functions.  Even though such mappings are often simple, pin
-numbers received by Firmata protocol should always be used as
-input to these macros, and the result of the macro should be
-used with with any Arduino function.
-
-When Firmata is extended to support a new pin mode or feature,
-a pair of macros should be added and used for all hardware
-access.  For simple 1:1 mapping, these macros add no actual
-overhead, yet their consistent use allows source code which
-uses them consistently to be easily adapted to all other boards
-with different requirements.
-
-IS_PIN_XXXX(pin): The IS_PIN macros resolve to true or non-zero
-    if a pin as implemented by Firmata corresponds to a pin
-    that actually implements the named feature.
-
-PIN_TO_XXXX(pin): The PIN_TO macros translate pin numbers as
-    implemented by Firmata to the pin numbers needed as inputs
-    to the Arduino functions.  The corresponding IS_PIN macro
-    should always be tested before using a PIN_TO macro, so
-    these macros only need to handle valid Firmata pin
-    numbers for the named feature.
-
-
-Port Access Inline Funtions:
-
-For efficiency, Firmata protocol provides access to digital
-input and output pins grouped by 8 bit ports.  When these
-groups of 8 correspond to actual 8 bit ports as implemented
-by the hardware, these inline functions can provide high
-speed direct port access.  Otherwise, a default implementation
-using 8 calls to digitalWrite or digitalRead is used.
-
-When porting Firmata to a new board, it is recommended to
-use the default functions first and focus only on the constants
-and macros above.  When those are working, if optimized port
-access is desired, these inline functions may be extended.
-The recommended approach defines a symbol indicating which
-optimization to use, and then conditional complication is
-used within these functions.
-
-readPort(port, bitmask):  Read an 8 bit port, returning the value.
-   port:    The port number, Firmata pins port*8 to port*8+7
-   bitmask: The actual pins to read, indicated by 1 bits.
-
-writePort(port, value, bitmask):  Write an 8 bit port.
-   port:    The port number, Firmata pins port*8 to port*8+7
-   value:   The 8 bit value to write
-   bitmask: The actual pins to write, indicated by 1 bits.
-*/
-
-/*==============================================================================
- * Board Specific Configuration
- *============================================================================*/
-
-#ifndef digitalPinHasPWM
-#define digitalPinHasPWM(p)     IS_PIN_DIGITAL(p)
-#endif
-
-// Arduino Duemilanove, Diecimila, and NG
-#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
-#if defined(NUM_ANALOG_INPUTS) && NUM_ANALOG_INPUTS == 6
-#define TOTAL_ANALOG_PINS       6
-#define TOTAL_PINS              20 // 14 digital + 6 analog
-#else
-#define TOTAL_ANALOG_PINS       8
-#define TOTAL_PINS              22 // 14 digital + 8 analog
-#endif
-#define VERSION_BLINK_PIN       13
-#define IS_PIN_DIGITAL(p)       ((p) >= 2 && (p) <= 19)
-#define IS_PIN_ANALOG(p)        ((p) >= 14 && (p) < 14 + TOTAL_ANALOG_PINS)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         (IS_PIN_DIGITAL(p) && (p) - 2 < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == 18 || (p) == 19)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        ((p) - 14)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         ((p) - 2)
-#define ARDUINO_PINOUT_OPTIMIZE 1
-
-
-// Wiring (and board)
-#elif defined(WIRING)
-#define VERSION_BLINK_PIN       WLED
-#define IS_PIN_DIGITAL(p)       ((p) >= 0 && (p) < TOTAL_PINS)
-#define IS_PIN_ANALOG(p)        ((p) >= FIRST_ANALOG_PIN && (p) < (FIRST_ANALOG_PIN+TOTAL_ANALOG_PINS))
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         ((p) >= 0 && (p) < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == SDA || (p) == SCL)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        ((p) - FIRST_ANALOG_PIN)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         (p) 
-
-
-// old Arduinos
-#elif defined(__AVR_ATmega8__)
-#define TOTAL_ANALOG_PINS       6
-#define TOTAL_PINS              20 // 14 digital + 6 analog
-#define VERSION_BLINK_PIN       13
-#define IS_PIN_DIGITAL(p)       ((p) >= 2 && (p) <= 19)
-#define IS_PIN_ANALOG(p)        ((p) >= 14 && (p) <= 19)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         (IS_PIN_DIGITAL(p) && (p) - 2 < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == 18 || (p) == 19)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        ((p) - 14)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         ((p) - 2)
-#define ARDUINO_PINOUT_OPTIMIZE 1
-
-
-// Arduino Mega
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#define TOTAL_ANALOG_PINS       16
-#define TOTAL_PINS              70 // 54 digital + 16 analog
-#define VERSION_BLINK_PIN       13
-#define IS_PIN_DIGITAL(p)       ((p) >= 2 && (p) < TOTAL_PINS)
-#define IS_PIN_ANALOG(p)        ((p) >= 54 && (p) < TOTAL_PINS)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         ((p) >= 2 && (p) - 2 < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == 20 || (p) == 21)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        ((p) - 54)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         ((p) - 2)
-
-
-// Teensy 1.0
-#elif defined(__AVR_AT90USB162__)
-#define TOTAL_ANALOG_PINS       0
-#define TOTAL_PINS              21 // 21 digital + no analog
-#define VERSION_BLINK_PIN       6
-#define IS_PIN_DIGITAL(p)       ((p) >= 0 && (p) < TOTAL_PINS)
-#define IS_PIN_ANALOG(p)        (0)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         ((p) >= 0 && (p) < MAX_SERVOS)
-#define IS_PIN_I2C(p)           (0)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        (0)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         (p)
-
-
-// Teensy 2.0
-#elif defined(__AVR_ATmega32U4__)
-#define TOTAL_ANALOG_PINS       12
-#define TOTAL_PINS              25 // 11 digital + 12 analog
-#define VERSION_BLINK_PIN       11
-#define IS_PIN_DIGITAL(p)       ((p) >= 0 && (p) < TOTAL_PINS)
-#define IS_PIN_ANALOG(p)        ((p) >= 11 && (p) <= 22)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         ((p) >= 0 && (p) < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == 5 || (p) == 6)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        (((p)<22)?21-(p):11)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         (p)
-
-
-// Teensy++ 1.0 and 2.0
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-#define TOTAL_ANALOG_PINS       8
-#define TOTAL_PINS              46 // 38 digital + 8 analog
-#define VERSION_BLINK_PIN       6
-#define IS_PIN_DIGITAL(p)       ((p) >= 0 && (p) < TOTAL_PINS)
-#define IS_PIN_ANALOG(p)        ((p) >= 38 && (p) < TOTAL_PINS)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         ((p) >= 0 && (p) < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == 0 || (p) == 1)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        ((p) - 38)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         (p)
-
-
-// Sanguino
-#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
-#define TOTAL_ANALOG_PINS       8
-#define TOTAL_PINS              32 // 24 digital + 8 analog
-#define VERSION_BLINK_PIN       0
-#define IS_PIN_DIGITAL(p)       ((p) >= 2 && (p) < TOTAL_PINS)
-#define IS_PIN_ANALOG(p)        ((p) >= 24 && (p) < TOTAL_PINS)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         ((p) >= 0 && (p) < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == 16 || (p) == 17)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        ((p) - 24)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         ((p) - 2)
-
-
-// Illuminato
-#elif defined(__AVR_ATmega645__)
-#define TOTAL_ANALOG_PINS       6
-#define TOTAL_PINS              42 // 36 digital + 6 analog
-#define VERSION_BLINK_PIN       13
-#define IS_PIN_DIGITAL(p)       ((p) >= 2 && (p) < TOTAL_PINS)
-#define IS_PIN_ANALOG(p)        ((p) >= 36 && (p) < TOTAL_PINS)
-#define IS_PIN_PWM(p)           digitalPinHasPWM(p)
-#define IS_PIN_SERVO(p)         ((p) >= 0 && (p) < MAX_SERVOS)
-#define IS_PIN_I2C(p)           ((p) == 4 || (p) == 5)
-#define PIN_TO_DIGITAL(p)       (p)
-#define PIN_TO_ANALOG(p)        ((p) - 36)
-#define PIN_TO_PWM(p)           PIN_TO_DIGITAL(p)
-#define PIN_TO_SERVO(p)         ((p) - 2)
-
-
-// anything else
-#else
-#error "Please edit Boards.h with a hardware abstraction for this board"
-#endif
-
-
-/*==============================================================================
- * readPort() - Read an 8 bit port
- *============================================================================*/
-
-static inline unsigned char readPort(byte, byte) __attribute__((always_inline, unused));
-static inline unsigned char readPort(byte port, byte bitmask)
-{
-#if defined(ARDUINO_PINOUT_OPTIMIZE)
-	if (port == 0) return (PIND & 0xFC) & bitmask; // ignore Rx/Tx 0/1
-	if (port == 1) return ((PINB & 0x3F) | ((PINC & 0x03) << 6)) & bitmask;
-	if (port == 2) return ((PINC & 0x3C) >> 2) & bitmask;
-	return 0;
-#else
-	unsigned char out=0, pin=port*8;
-	if (IS_PIN_DIGITAL(pin+0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin+0))) out |= 0x01;
-	if (IS_PIN_DIGITAL(pin+1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin+1))) out |= 0x02;
-	if (IS_PIN_DIGITAL(pin+2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin+2))) out |= 0x04;
-	if (IS_PIN_DIGITAL(pin+3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin+3))) out |= 0x08;
-	if (IS_PIN_DIGITAL(pin+4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin+4))) out |= 0x10;
-	if (IS_PIN_DIGITAL(pin+5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin+5))) out |= 0x20;
-	if (IS_PIN_DIGITAL(pin+6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin+6))) out |= 0x40;
-	if (IS_PIN_DIGITAL(pin+7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin+7))) out |= 0x80;
-	return out;
-#endif
-}
-
-/*==============================================================================
- * writePort() - Write an 8 bit port, only touch pins specified by a bitmask
- *============================================================================*/
-
-static inline unsigned char writePort(byte, byte, byte) __attribute__((always_inline, unused));
-static inline unsigned char writePort(byte port, byte value, byte bitmask)
-{
-#if defined(ARDUINO_PINOUT_OPTIMIZE)
-	if (port == 0) {
-		bitmask = bitmask & 0xFC;  // do not touch Tx & Rx pins
-		byte valD = value & bitmask;
-		byte maskD = ~bitmask;
-		cli();
-		PORTD = (PORTD & maskD) | valD;
-		sei();
-	} else if (port == 1) {
-		byte valB = (value & bitmask) & 0x3F;
-		byte valC = (value & bitmask) >> 6;
-		byte maskB = ~(bitmask & 0x3F);
-		byte maskC = ~((bitmask & 0xC0) >> 6);
-		cli();
-		PORTB = (PORTB & maskB) | valB;
-		PORTC = (PORTC & maskC) | valC;
-		sei();
-	} else if (port == 2) {
-		bitmask = bitmask & 0x0F;
-		byte valC = (value & bitmask) << 2;
-		byte maskC = ~(bitmask << 2);
-		cli();
-		PORTC = (PORTC & maskC) | valC;
-		sei();
-	}
-#else
-	byte pin=port*8;
-	if ((bitmask & 0x01)) digitalWrite(PIN_TO_DIGITAL(pin+0), (value & 0x01));
-	if ((bitmask & 0x02)) digitalWrite(PIN_TO_DIGITAL(pin+1), (value & 0x02));
-	if ((bitmask & 0x04)) digitalWrite(PIN_TO_DIGITAL(pin+2), (value & 0x04));
-	if ((bitmask & 0x08)) digitalWrite(PIN_TO_DIGITAL(pin+3), (value & 0x08));
-	if ((bitmask & 0x10)) digitalWrite(PIN_TO_DIGITAL(pin+4), (value & 0x10));
-	if ((bitmask & 0x20)) digitalWrite(PIN_TO_DIGITAL(pin+5), (value & 0x20));
-	if ((bitmask & 0x40)) digitalWrite(PIN_TO_DIGITAL(pin+6), (value & 0x40));
-	if ((bitmask & 0x80)) digitalWrite(PIN_TO_DIGITAL(pin+7), (value & 0x80));
-#endif
-}
-
-
-
-
-#ifndef TOTAL_PORTS
-#define TOTAL_PORTS             ((TOTAL_PINS + 7) / 8)
-#endif
-
-
-#endif /* Firmata_Boards_h */
-
diff --git a/libraries/Firmata/Firmata.cpp b/libraries/Firmata/Firmata.cpp
deleted file mode 100644
index 36f8ed1..0000000
--- a/libraries/Firmata/Firmata.cpp
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
-  Firmata.cpp - Firmata library
-  Copyright (C) 2006-2008 Hans-Christoph Steiner.  All rights reserved.
- 
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  See file LICENSE.txt for further informations on licensing terms.
-*/
-
-//******************************************************************************
-//* Includes
-//******************************************************************************
-
-#include "Firmata.h"
-#include "HardwareSerial.h"
-
-extern "C" {
-#include <string.h>
-#include <stdlib.h>
-}
-
-//******************************************************************************
-//* Support Functions
-//******************************************************************************
-
-void FirmataClass::sendValueAsTwo7bitBytes(int value)
-{
-  FirmataSerial.write(value & B01111111); // LSB
-  FirmataSerial.write(value >> 7 & B01111111); // MSB
-}
-
-void FirmataClass::startSysex(void)
-{
-  FirmataSerial.write(START_SYSEX);
-}
-
-void FirmataClass::endSysex(void)
-{
-  FirmataSerial.write(END_SYSEX);
-}
-
-//******************************************************************************
-//* Constructors
-//******************************************************************************
-
-FirmataClass::FirmataClass(Stream &s) : FirmataSerial(s)
-{
-  firmwareVersionCount = 0;
-  systemReset();
-}
-
-//******************************************************************************
-//* Public Methods
-//******************************************************************************
-
-/* begin method for overriding default serial bitrate */
-void FirmataClass::begin(void)
-{
-  begin(57600);
-}
-
-/* begin method for overriding default serial bitrate */
-void FirmataClass::begin(long speed)
-{
-  Serial.begin(speed);
-  FirmataSerial = Serial;
-  blinkVersion();
-  printVersion();
-  printFirmwareVersion();
-}
-
-void FirmataClass::begin(Stream &s)
-{
-  FirmataSerial = s;
-  systemReset();
-  printVersion();
-  printFirmwareVersion();
-}
-
-// output the protocol version message to the serial port
-void FirmataClass::printVersion(void) {
-  FirmataSerial.write(REPORT_VERSION);
-  FirmataSerial.write(FIRMATA_MAJOR_VERSION);
-  FirmataSerial.write(FIRMATA_MINOR_VERSION);
-}
-
-void FirmataClass::blinkVersion(void)
-{
-  // flash the pin with the protocol version
-  pinMode(VERSION_BLINK_PIN,OUTPUT);
-  pin13strobe(FIRMATA_MAJOR_VERSION, 40, 210);
-  delay(250);
-  pin13strobe(FIRMATA_MINOR_VERSION, 40, 210);
-  delay(125);
-}
-
-void FirmataClass::printFirmwareVersion(void)
-{
-  byte i;
-
-  if(firmwareVersionCount) { // make sure that the name has been set before reporting
-    startSysex();
-    FirmataSerial.write(REPORT_FIRMWARE);
-    FirmataSerial.write(firmwareVersionVector[0]); // major version number
-    FirmataSerial.write(firmwareVersionVector[1]); // minor version number
-    for(i=2; i<firmwareVersionCount; ++i) {
-      sendValueAsTwo7bitBytes(firmwareVersionVector[i]);
-    }
-    endSysex();
-  }
-}
-
-void FirmataClass::setFirmwareNameAndVersion(const char *name, byte major, byte minor)
-{
-  const char *filename;
-  char *extension;
-
-  // parse out ".cpp" and "applet/" that comes from using __FILE__
-  extension = strstr(name, ".cpp");
-  filename = strrchr(name, '/') + 1; //points to slash, +1 gets to start of filename
-  // add two bytes for version numbers
-  if(extension && filename) {
-    firmwareVersionCount = extension - filename + 2;
-  } else {
-    firmwareVersionCount = strlen(name) + 2;
-    filename = name;
-  }
-  firmwareVersionVector = (byte *) malloc(firmwareVersionCount);
-  firmwareVersionVector[firmwareVersionCount] = 0;
-  firmwareVersionVector[0] = major;
-  firmwareVersionVector[1] = minor;
-  strncpy((char*)firmwareVersionVector + 2, filename, firmwareVersionCount - 2);
-  // alas, no snprintf on Arduino
-  //    snprintf(firmwareVersionVector, MAX_DATA_BYTES, "%c%c%s", 
-  //             (char)major, (char)minor, firmwareVersionVector);
-}
-
-//------------------------------------------------------------------------------
-// Serial Receive Handling
-
-int FirmataClass::available(void)
-{
-  return FirmataSerial.available();
-}
-
-
-void FirmataClass::processSysexMessage(void)
-{
-  switch(storedInputData[0]) { //first byte in buffer is command
-  case REPORT_FIRMWARE:
-    printFirmwareVersion();
-    break;
-  case STRING_DATA:
-    if(currentStringCallback) {
-      byte bufferLength = (sysexBytesRead - 1) / 2;
-      char *buffer = (char*)malloc(bufferLength * sizeof(char));
-      byte i = 1;
-      byte j = 0;
-      while(j < bufferLength) {
-        buffer[j] = (char)storedInputData[i];
-        i++;
-        buffer[j] += (char)(storedInputData[i] << 7);
-        i++;
-        j++;
-      }
-      (*currentStringCallback)(buffer);
-    }
-    break;
-  default:
-    if(currentSysexCallback)
-      (*currentSysexCallback)(storedInputData[0], sysexBytesRead - 1, storedInputData + 1);
-  }
-}
-
-void FirmataClass::processInput(void)
-{
-  int inputData = FirmataSerial.read(); // this is 'int' to handle -1 when no data
-  int command;
-    
-  // TODO make sure it handles -1 properly
-
-  if (parsingSysex) {
-    if(inputData == END_SYSEX) {
-      //stop sysex byte      
-      parsingSysex = false;
-      //fire off handler function
-      processSysexMessage();
-    } else {
-      //normal data byte - add to buffer
-      storedInputData[sysexBytesRead] = inputData;
-      sysexBytesRead++;
-    }
-  } else if( (waitForData > 0) && (inputData < 128) ) {  
-    waitForData--;
-    storedInputData[waitForData] = inputData;
-    if( (waitForData==0) && executeMultiByteCommand ) { // got the whole message
-      switch(executeMultiByteCommand) {
-      case ANALOG_MESSAGE:
-        if(currentAnalogCallback) {
-          (*currentAnalogCallback)(multiByteChannel,
-                                   (storedInputData[0] << 7)
-                                   + storedInputData[1]);
-        }
-        break;
-      case DIGITAL_MESSAGE:
-        if(currentDigitalCallback) {
-          (*currentDigitalCallback)(multiByteChannel,
-                                    (storedInputData[0] << 7)
-                                    + storedInputData[1]);
-        }
-        break;
-      case SET_PIN_MODE:
-        if(currentPinModeCallback)
-          (*currentPinModeCallback)(storedInputData[1], storedInputData[0]);
-        break;
-      case REPORT_ANALOG:
-        if(currentReportAnalogCallback)
-          (*currentReportAnalogCallback)(multiByteChannel,storedInputData[0]);
-        break;
-      case REPORT_DIGITAL:
-        if(currentReportDigitalCallback)
-          (*currentReportDigitalCallback)(multiByteChannel,storedInputData[0]);
-        break;
-      }
-      executeMultiByteCommand = 0;
-    }	
-  } else {
-    // remove channel info from command byte if less than 0xF0
-    if(inputData < 0xF0) {
-      command = inputData & 0xF0;
-      multiByteChannel = inputData & 0x0F;
-    } else {
-      command = inputData;
-      // commands in the 0xF* range don't use channel data
-    }
-    switch (command) {
-    case ANALOG_MESSAGE:
-    case DIGITAL_MESSAGE:
-    case SET_PIN_MODE:
-      waitForData = 2; // two data bytes needed
-      executeMultiByteCommand = command;
-      break;
-    case REPORT_ANALOG:
-    case REPORT_DIGITAL:
-      waitForData = 1; // one data byte needed
-      executeMultiByteCommand = command;
-      break;
-    case START_SYSEX:
-      parsingSysex = true;
-      sysexBytesRead = 0;
-      break;
-    case SYSTEM_RESET:
-      systemReset();
-      break;
-    case REPORT_VERSION:
-      Firmata.printVersion();
-      break;
-    }
-  }
-}
-
-//------------------------------------------------------------------------------
-// Serial Send Handling
-
-// send an analog message
-void FirmataClass::sendAnalog(byte pin, int value) 
-{
-  // pin can only be 0-15, so chop higher bits
-  FirmataSerial.write(ANALOG_MESSAGE | (pin & 0xF));
-  sendValueAsTwo7bitBytes(value);
-}
-
-// send a single digital pin in a digital message
-void FirmataClass::sendDigital(byte pin, int value) 
-{
-  /* TODO add single pin digital messages to the protocol, this needs to
-   * track the last digital data sent so that it can be sure to change just
-   * one bit in the packet.  This is complicated by the fact that the
-   * numbering of the pins will probably differ on Arduino, Wiring, and
-   * other boards.  The DIGITAL_MESSAGE sends 14 bits at a time, but it is
-   * probably easier to send 8 bit ports for any board with more than 14
-   * digital pins.
-   */
-
-  // TODO: the digital message should not be sent on the serial port every
-  // time sendDigital() is called.  Instead, it should add it to an int
-  // which will be sent on a schedule.  If a pin changes more than once
-  // before the digital message is sent on the serial port, it should send a
-  // digital message for each change.
-
-  //    if(value == 0)
-  //        sendDigitalPortPair();
-}
-
-
-// send 14-bits in a single digital message (protocol v1)
-// send an 8-bit port in a single digital message (protocol v2)
-void FirmataClass::sendDigitalPort(byte portNumber, int portData)
-{
-  FirmataSerial.write(DIGITAL_MESSAGE | (portNumber & 0xF));
-  FirmataSerial.write((byte)portData % 128); // Tx bits 0-6
-  FirmataSerial.write(portData >> 7);  // Tx bits 7-13
-}
-
-
-void FirmataClass::sendSysex(byte command, byte bytec, byte* bytev) 
-{
-  byte i;
-  startSysex();
-  FirmataSerial.write(command);
-  for(i=0; i<bytec; i++) {
-    sendValueAsTwo7bitBytes(bytev[i]);        
-  }
-  endSysex();
-}
-
-void FirmataClass::sendString(byte command, const char* string) 
-{
-  sendSysex(command, strlen(string), (byte *)string);
-}
-
-
-// send a string as the protocol string type
-void FirmataClass::sendString(const char* string) 
-{
-  sendString(STRING_DATA, string);
-}
-
-
-// Internal Actions/////////////////////////////////////////////////////////////
-
-// generic callbacks
-void FirmataClass::attach(byte command, callbackFunction newFunction)
-{
-  switch(command) {
-  case ANALOG_MESSAGE: currentAnalogCallback = newFunction; break;
-  case DIGITAL_MESSAGE: currentDigitalCallback = newFunction; break;
-  case REPORT_ANALOG: currentReportAnalogCallback = newFunction; break;
-  case REPORT_DIGITAL: currentReportDigitalCallback = newFunction; break;
-  case SET_PIN_MODE: currentPinModeCallback = newFunction; break;
-  }
-}
-
-void FirmataClass::attach(byte command, systemResetCallbackFunction newFunction)
-{
-  switch(command) {
-  case SYSTEM_RESET: currentSystemResetCallback = newFunction; break;
-  }
-}
-
-void FirmataClass::attach(byte command, stringCallbackFunction newFunction)
-{
-  switch(command) {
-  case STRING_DATA: currentStringCallback = newFunction; break;
-  }
-}
-
-void FirmataClass::attach(byte command, sysexCallbackFunction newFunction)
-{
-  currentSysexCallback = newFunction;
-}
-
-void FirmataClass::detach(byte command)
-{
-  switch(command) {
-  case SYSTEM_RESET: currentSystemResetCallback = NULL; break;
-  case STRING_DATA: currentStringCallback = NULL; break;
-  case START_SYSEX: currentSysexCallback = NULL; break;
-  default:
-    attach(command, (callbackFunction)NULL);
-  }
-}
-
-// sysex callbacks
-/*
- * this is too complicated for analogReceive, but maybe for Sysex?
- void FirmataClass::attachSysex(sysexFunction newFunction)
- {
- byte i;
- byte tmpCount = analogReceiveFunctionCount;
- analogReceiveFunction* tmpArray = analogReceiveFunctionArray;
- analogReceiveFunctionCount++;
- analogReceiveFunctionArray = (analogReceiveFunction*) calloc(analogReceiveFunctionCount, sizeof(analogReceiveFunction));
- for(i = 0; i < tmpCount; i++) {
- analogReceiveFunctionArray[i] = tmpArray[i];
- }
- analogReceiveFunctionArray[tmpCount] = newFunction;
- free(tmpArray);
- }
-*/
-
-//******************************************************************************
-//* Private Methods
-//******************************************************************************
-
-
-
-// resets the system state upon a SYSTEM_RESET message from the host software
-void FirmataClass::systemReset(void)
-{
-  byte i;
-
-  waitForData = 0; // this flag says the next serial input will be data
-  executeMultiByteCommand = 0; // execute this after getting multi-byte data
-  multiByteChannel = 0; // channel data for multiByteCommands
-
-
-  for(i=0; i<MAX_DATA_BYTES; i++) {
-    storedInputData[i] = 0;
-  }
-
-  parsingSysex = false;
-  sysexBytesRead = 0;
-
-  if(currentSystemResetCallback)
-    (*currentSystemResetCallback)();
-
-  //flush(); //TODO uncomment when Firmata is a subclass of HardwareSerial
-}
-
-
-
-// =============================================================================
-// used for flashing the pin for the version number
-void FirmataClass::pin13strobe(int count, int onInterval, int offInterval) 
-{
-  byte i;
-  pinMode(VERSION_BLINK_PIN, OUTPUT);
-  for(i=0; i<count; i++) {
-    delay(offInterval);
-    digitalWrite(VERSION_BLINK_PIN, HIGH);
-    delay(onInterval);
-    digitalWrite(VERSION_BLINK_PIN, LOW);
-  }
-}
-
-
-// make one instance for the user to use
-FirmataClass Firmata(Serial);
-
-
diff --git a/libraries/Firmata/Firmata.h b/libraries/Firmata/Firmata.h
deleted file mode 100644
index 74f1ccc..0000000
--- a/libraries/Firmata/Firmata.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
-  Firmata.h - Firmata library
-  Copyright (C) 2006-2008 Hans-Christoph Steiner.  All rights reserved.
- 
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  See file LICENSE.txt for further informations on licensing terms.
-*/
-
-#ifndef Firmata_h
-#define Firmata_h
-
-#include "Boards.h"  /* Hardware Abstraction Layer + Wiring/Arduino */
-
-/* Version numbers for the protocol.  The protocol is still changing, so these
- * version numbers are important.  This number can be queried so that host
- * software can test whether it will be compatible with the currently
- * installed firmware. */
-#define FIRMATA_MAJOR_VERSION   2 // for non-compatible changes
-#define FIRMATA_MINOR_VERSION   3 // for backwards compatible changes
-#define FIRMATA_BUGFIX_VERSION  1 // for bugfix releases
-
-#define MAX_DATA_BYTES 32 // max number of data bytes in non-Sysex messages
-
-// message command bytes (128-255/0x80-0xFF)
-#define DIGITAL_MESSAGE         0x90 // send data for a digital pin
-#define ANALOG_MESSAGE          0xE0 // send data for an analog pin (or PWM)
-#define REPORT_ANALOG           0xC0 // enable analog input by pin #
-#define REPORT_DIGITAL          0xD0 // enable digital input by port pair
-//
-#define SET_PIN_MODE            0xF4 // set a pin to INPUT/OUTPUT/PWM/etc
-//
-#define REPORT_VERSION          0xF9 // report protocol version
-#define SYSTEM_RESET            0xFF // reset from MIDI
-//
-#define START_SYSEX             0xF0 // start a MIDI Sysex message
-#define END_SYSEX               0xF7 // end a MIDI Sysex message
-
-// extended command set using sysex (0-127/0x00-0x7F)
-/* 0x00-0x0F reserved for user-defined commands */
-#define SERVO_CONFIG            0x70 // set max angle, minPulse, maxPulse, freq
-#define STRING_DATA             0x71 // a string message with 14-bits per char
-#define SHIFT_DATA              0x75 // a bitstream to/from a shift register
-#define I2C_REQUEST             0x76 // send an I2C read/write request
-#define I2C_REPLY               0x77 // a reply to an I2C read request
-#define I2C_CONFIG              0x78 // config I2C settings such as delay times and power pins
-#define EXTENDED_ANALOG         0x6F // analog write (PWM, Servo, etc) to any pin
-#define PIN_STATE_QUERY         0x6D // ask for a pin's current mode and value
-#define PIN_STATE_RESPONSE      0x6E // reply with pin's current mode and value
-#define CAPABILITY_QUERY        0x6B // ask for supported modes and resolution of all pins
-#define CAPABILITY_RESPONSE     0x6C // reply with supported modes and resolution
-#define ANALOG_MAPPING_QUERY    0x69 // ask for mapping of analog to pin numbers
-#define ANALOG_MAPPING_RESPONSE 0x6A // reply with mapping info
-#define REPORT_FIRMWARE         0x79 // report name and version of the firmware
-#define SAMPLING_INTERVAL       0x7A // set the poll rate of the main loop
-#define SYSEX_NON_REALTIME      0x7E // MIDI Reserved for non-realtime messages
-#define SYSEX_REALTIME          0x7F // MIDI Reserved for realtime messages
-// these are DEPRECATED to make the naming more consistent
-#define FIRMATA_STRING          0x71 // same as STRING_DATA
-#define SYSEX_I2C_REQUEST       0x76 // same as I2C_REQUEST
-#define SYSEX_I2C_REPLY         0x77 // same as I2C_REPLY
-#define SYSEX_SAMPLING_INTERVAL 0x7A // same as SAMPLING_INTERVAL
-
-// pin modes
-//#define INPUT                 0x00 // defined in wiring.h
-//#define OUTPUT                0x01 // defined in wiring.h
-#define ANALOG                  0x02 // analog pin in analogInput mode
-#define PWM                     0x03 // digital pin in PWM output mode
-#define SERVO                   0x04 // digital pin in Servo output mode
-#define SHIFT                   0x05 // shiftIn/shiftOut mode
-#define I2C                     0x06 // pin included in I2C setup
-#define TOTAL_PIN_MODES         7
-
-extern "C" {
-// callback function types
-    typedef void (*callbackFunction)(byte, int);
-    typedef void (*systemResetCallbackFunction)(void);
-    typedef void (*stringCallbackFunction)(char*);
-    typedef void (*sysexCallbackFunction)(byte command, byte argc, byte*argv);
-}
-
-
-// TODO make it a subclass of a generic Serial/Stream base class
-class FirmataClass
-{
-public:
-	FirmataClass(Stream &s);
-/* Arduino constructors */
-    void begin();
-    void begin(long);
-    void begin(Stream &s);
-/* querying functions */
-	void printVersion(void);
-    void blinkVersion(void);
-    void printFirmwareVersion(void);
-  //void setFirmwareVersion(byte major, byte minor);  // see macro below
-    void setFirmwareNameAndVersion(const char *name, byte major, byte minor);
-/* serial receive handling */
-    int available(void);
-    void processInput(void);
-/* serial send handling */
-	void sendAnalog(byte pin, int value);
-	void sendDigital(byte pin, int value); // TODO implement this
-	void sendDigitalPort(byte portNumber, int portData);
-    void sendString(const char* string);
-    void sendString(byte command, const char* string);
-	void sendSysex(byte command, byte bytec, byte* bytev);
-/* attach & detach callback functions to messages */
-    void attach(byte command, callbackFunction newFunction);
-    void attach(byte command, systemResetCallbackFunction newFunction);
-    void attach(byte command, stringCallbackFunction newFunction);
-    void attach(byte command, sysexCallbackFunction newFunction);
-    void detach(byte command);
-
-private:
-    Stream &FirmataSerial;
-/* firmware name and version */
-    byte firmwareVersionCount;
-    byte *firmwareVersionVector;
-/* input message handling */
-    byte waitForData; // this flag says the next serial input will be data
-    byte executeMultiByteCommand; // execute this after getting multi-byte data
-    byte multiByteChannel; // channel data for multiByteCommands
-    byte storedInputData[MAX_DATA_BYTES]; // multi-byte data
-/* sysex */
-    boolean parsingSysex;
-    int sysexBytesRead;
-/* callback functions */
-    callbackFunction currentAnalogCallback;
-    callbackFunction currentDigitalCallback;
-    callbackFunction currentReportAnalogCallback;
-    callbackFunction currentReportDigitalCallback;
-    callbackFunction currentPinModeCallback;
-    systemResetCallbackFunction currentSystemResetCallback;
-    stringCallbackFunction currentStringCallback;
-    sysexCallbackFunction currentSysexCallback;
-
-/* private methods ------------------------------ */
-    void processSysexMessage(void);
-	void systemReset(void);
-    void pin13strobe(int count, int onInterval, int offInterval);
-    void sendValueAsTwo7bitBytes(int value);
-    void startSysex(void);
-    void endSysex(void);
-};
-
-extern FirmataClass Firmata;
-
-/*==============================================================================
- * MACROS
- *============================================================================*/
-
-/* shortcut for setFirmwareNameAndVersion() that uses __FILE__ to set the
- * firmware name.  It needs to be a macro so that __FILE__ is included in the
- * firmware source file rather than the library source file.
- */
-#define setFirmwareVersion(x, y)   setFirmwareNameAndVersion(__FILE__, x, y)
-
-#endif /* Firmata_h */
-
diff --git a/libraries/Firmata/LICENSE.txt b/libraries/Firmata/LICENSE.txt
deleted file mode 100644
index 77cec6d..0000000
--- a/libraries/Firmata/LICENSE.txt
+++ /dev/null
@@ -1,458 +0,0 @@
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
diff --git a/libraries/Firmata/TODO.txt b/libraries/Firmata/TODO.txt
deleted file mode 100644
index 86c9858..0000000
--- a/libraries/Firmata/TODO.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-
-- make Firmata a subclass of HardwareSerial
-
-- per-pin digital callback, since the per-port callback is a bit complicated
-  for beginners (maybe Firmata is not for beginners...)
-
-- simplify SimpleDigitalFirmata, take out the code that checks to see if the
-  data has changed, since it is a bit complicated for this example.  Ideally
-  this example would be based on a call
-
-- turn current SimpleDigitalFirmata into DigitalPortFirmata for a more complex
-  example using the code which checks for changes before doing anything
-
-- test integration with Wiring
diff --git a/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino b/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino
deleted file mode 100644
index bff7366..0000000
--- a/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.ino
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/* 
- * This firmware reads all inputs and sends them as fast as it can.  It was
- * inspired by the ease-of-use of the Arduino2Max program.
- *
- * This example code is in the public domain.
- */
-#include <Firmata.h>
-
-byte pin;
-
-int analogValue;
-int previousAnalogValues[TOTAL_ANALOG_PINS];
-
-byte portStatus[TOTAL_PORTS];	// each bit: 1=pin is digital input, 0=other/ignore
-byte previousPINs[TOTAL_PORTS];
-
-/* timer variables */
-unsigned long currentMillis;     // store the current value from millis()
-unsigned long previousMillis;    // for comparison with currentMillis
-/* make sure that the FTDI buffer doesn't go over 60 bytes, otherwise you
-   get long, random delays.  So only read analogs every 20ms or so */
-int samplingInterval = 19;      // how often to run the main loop (in ms)
-
-void sendPort(byte portNumber, byte portValue)
-{
-  portValue = portValue & portStatus[portNumber];
-  if(previousPINs[portNumber] != portValue) {
-    Firmata.sendDigitalPort(portNumber, portValue);
-    previousPINs[portNumber] = portValue;
-  }
-}
-
-void setup()
-{
-  byte i, port, status;
-
-  Firmata.setFirmwareVersion(0, 1);
-
-  for(pin = 0; pin < TOTAL_PINS; pin++) {
-    if IS_PIN_DIGITAL(pin) pinMode(PIN_TO_DIGITAL(pin), INPUT);
-  }
-
-  for (port=0; port<TOTAL_PORTS; port++) {
-    status = 0;
-    for (i=0; i<8; i++) {
-      if (IS_PIN_DIGITAL(port * 8 + i)) status |= (1 << i);
-    }
-    portStatus[port] = status;
-  }
-
-  Firmata.begin(57600);
-}
-
-void loop()
-{
-  byte i;
-
-  for (i=0; i<TOTAL_PORTS; i++) {
-      sendPort(i, readPort(i, 0xff));
-  }
-  /* make sure that the FTDI buffer doesn't go over 60 bytes, otherwise you
-     get long, random delays.  So only read analogs every 20ms or so */
-  currentMillis = millis();
-  if(currentMillis - previousMillis > samplingInterval) {
-    previousMillis += samplingInterval;
-    while(Firmata.available()) {
-      Firmata.processInput();
-    }
-    for(pin = 0; pin < TOTAL_ANALOG_PINS; pin++) {
-      analogValue = analogRead(pin);
-      if(analogValue != previousAnalogValues[pin]) {
-        Firmata.sendAnalog(pin, analogValue); 
-        previousAnalogValues[pin] = analogValue;
-      }
-    }
-  }
-}
-
-
diff --git a/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino b/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino
deleted file mode 100644
index ff1d664..0000000
--- a/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.ino
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/* This firmware supports as many analog ports as possible, all analog inputs,
- * four PWM outputs, and two with servo support.
- *
- * This example code is in the public domain.
- */
-#include <Servo.h>
-#include <Firmata.h>
-
-/*==============================================================================
- * GLOBAL VARIABLES
- *============================================================================*/
-
-/* servos */
-Servo servo9, servo10; // one instance per pin
-/* analog inputs */
-int analogInputsToReport = 0; // bitwise array to store pin reporting
-int analogPin = 0; // counter for reading analog pins
-/* timer variables */
-unsigned long currentMillis;     // store the current value from millis()
-unsigned long previousMillis;    // for comparison with currentMillis
-
-
-/*==============================================================================
- * FUNCTIONS                                                                
- *============================================================================*/
-
-void analogWriteCallback(byte pin, int value)
-{
-    switch(pin) {
-    case 9: servo9.write(value); break;
-    case 10: servo10.write(value); break;
-    case 3: 
-    case 5: 
-    case 6: 
-    case 11: // PWM pins
-        analogWrite(pin, value); 
-        break;
-    }
-}
-// -----------------------------------------------------------------------------
-// sets bits in a bit array (int) to toggle the reporting of the analogIns
-void reportAnalogCallback(byte pin, int value)
-{
-    if(value == 0) {
-        analogInputsToReport = analogInputsToReport &~ (1 << pin);
-    }
-    else { // everything but 0 enables reporting of that pin
-        analogInputsToReport = analogInputsToReport | (1 << pin);
-    }
-    // TODO: save status to EEPROM here, if changed
-}
-
-/*==============================================================================
- * SETUP()
- *============================================================================*/
-void setup() 
-{
-    Firmata.setFirmwareVersion(0, 2);
-    Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
-    Firmata.attach(REPORT_ANALOG, reportAnalogCallback);
-
-    servo9.attach(9);
-    servo10.attach(10);
-    Firmata.begin(57600);
-}
-
-/*==============================================================================
- * LOOP()
- *============================================================================*/
-void loop() 
-{
-    while(Firmata.available())
-        Firmata.processInput();
-    currentMillis = millis();
-    if(currentMillis - previousMillis > 20) {  
-        previousMillis += 20;                   // run this every 20ms
-        for(analogPin=0;analogPin<TOTAL_ANALOG_PINS;analogPin++) {
-            if( analogInputsToReport & (1 << analogPin) ) 
-                Firmata.sendAnalog(analogPin, analogRead(analogPin));
-        }
-    }
-}
-
diff --git a/libraries/Firmata/examples/EchoString/EchoString.ino b/libraries/Firmata/examples/EchoString/EchoString.ino
deleted file mode 100644
index 5079697..0000000
--- a/libraries/Firmata/examples/EchoString/EchoString.ino
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/* This sketch accepts strings and raw sysex messages and echos them back.
- *
- * This example code is in the public domain.
- */
-#include <Firmata.h>
-
-byte analogPin;
-
-void stringCallback(char *myString)
-{
-    Firmata.sendString(myString);
-}
-
-
-void sysexCallback(byte command, byte argc, byte*argv)
-{
-    Firmata.sendSysex(command, argc, argv);
-}
-
-void setup()
-{
-    Firmata.setFirmwareVersion(0, 1);
-    Firmata.attach(STRING_DATA, stringCallback);
-    Firmata.attach(START_SYSEX, sysexCallback);
-    Firmata.begin(57600);
-}
-
-void loop()
-{
-    while(Firmata.available()) {
-        Firmata.processInput();
-    }
-}
-
-
diff --git a/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino b/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino
deleted file mode 100644
index 1da8963..0000000
--- a/libraries/Firmata/examples/I2CFirmata/I2CFirmata.ino
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/*
- Copyright (C) 2009 Jeff Hoefs.  All rights reserved.
- Copyright (C) 2009 Shigeru Kobayashi.  All rights reserved.
- 
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
- 
- See file LICENSE.txt for further informations on licensing terms.
- */
-
-#include <Wire.h>
-#include <Firmata.h>
-
-
-#define I2C_WRITE B00000000
-#define I2C_READ B00001000
-#define I2C_READ_CONTINUOUSLY B00010000
-#define I2C_STOP_READING B00011000
-#define I2C_READ_WRITE_MODE_MASK B00011000
-
-#define MAX_QUERIES 8
-
-unsigned long currentMillis;     // store the current value from millis()
-unsigned long previousMillis;    // for comparison with currentMillis
-unsigned int samplingInterval = 32;  // default sampling interval is 33ms
-unsigned int i2cReadDelayTime = 0;  // default delay time between i2c read request and Wire.requestFrom()
-unsigned int powerPinsEnabled = 0;  // use as boolean to prevent enablePowerPins from being called more than once
-
-#define MINIMUM_SAMPLING_INTERVAL 10
-
-#define REGISTER_NOT_SPECIFIED -1
-
-struct i2c_device_info {
-  byte addr;
-  byte reg;
-  byte bytes;
-};
-
-i2c_device_info query[MAX_QUERIES];
-
-byte i2cRxData[32];
-boolean readingContinuously = false;
-byte queryIndex = 0;
-
-void readAndReportData(byte address, int theRegister, byte numBytes)
-{
-  if (theRegister != REGISTER_NOT_SPECIFIED) {
-    Wire.beginTransmission(address);
-    Wire.write((byte)theRegister);
-    Wire.endTransmission();
-    delayMicroseconds(i2cReadDelayTime);  // delay is necessary for some devices such as WiiNunchuck
-  } 
-  else {
-    theRegister = 0;  // fill the register with a dummy value
-  }
-
-  Wire.requestFrom(address, numBytes);
-
-  // check to be sure correct number of bytes were returned by slave
-  if(numBytes == Wire.available()) {
-    i2cRxData[0] = address;
-    i2cRxData[1] = theRegister;
-    for (int i = 0; i < numBytes; i++) {
-      i2cRxData[2 + i] = Wire.read();
-    }
-    // send slave address, register and received bytes
-    Firmata.sendSysex(I2C_REPLY, numBytes + 2, i2cRxData);
-  }
-  else {
-    if(numBytes > Wire.available()) {
-      Firmata.sendString("I2C Read Error: Too many bytes received");
-    } else {
-      Firmata.sendString("I2C Read Error: Too few bytes received"); 
-    }
-  }
-  
-}
-
-void sysexCallback(byte command, byte argc, byte *argv)
-{
-  byte mode;
-  byte slaveAddress;
-  byte slaveRegister;
-  byte data;
-  int  delayTime;
-
-  if (command == I2C_REQUEST) {
-    mode = argv[1] & I2C_READ_WRITE_MODE_MASK;
-    slaveAddress = argv[0];
-
-    switch(mode) {
-    case I2C_WRITE:
-      Wire.beginTransmission(slaveAddress);
-      for (byte i = 2; i < argc; i += 2) {
-        data = argv[i] + (argv[i + 1] << 7);
-        Wire.write(data);
-      }
-      Wire.endTransmission();
-      delayMicroseconds(70); // TODO is this needed?
-      break;
-    case I2C_READ:
-      if (argc == 6) {
-        // a slave register is specified
-        slaveRegister = argv[2] + (argv[3] << 7);
-        data = argv[4] + (argv[5] << 7);  // bytes to read
-        readAndReportData(slaveAddress, (int)slaveRegister, data);
-      } 
-      else {
-        // a slave register is NOT specified
-        data = argv[2] + (argv[3] << 7);  // bytes to read
-        readAndReportData(slaveAddress, (int)REGISTER_NOT_SPECIFIED, data);
-      }
-      break;
-    case I2C_READ_CONTINUOUSLY:
-      if ((queryIndex + 1) >= MAX_QUERIES) {
-        // too many queries, just ignore
-        Firmata.sendString("too many queries");
-        break;
-      }
-      query[queryIndex].addr = slaveAddress;
-      query[queryIndex].reg = argv[2] + (argv[3] << 7);
-      query[queryIndex].bytes = argv[4] + (argv[5] << 7);
-      readingContinuously = true;
-      queryIndex++;
-      break;
-    case I2C_STOP_READING:
-      readingContinuously = false;
-      queryIndex = 0;
-      break;
-    default:
-      break;
-    }
-  }
-  else if (command == SAMPLING_INTERVAL) {
-    samplingInterval = argv[0] + (argv[1] << 7);
-
-    if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) {
-      samplingInterval = MINIMUM_SAMPLING_INTERVAL;
-    }
-
-    samplingInterval -= 1;
-    Firmata.sendString("sampling interval");
-  }
-
-  else if (command == I2C_CONFIG) {
-    delayTime = (argv[4] + (argv[5] << 7));                        // MSB
-    delayTime = (delayTime << 8) + (argv[2] + (argv[3] << 7));     // add LSB
-
-    if((argv[0] + (argv[1] << 7)) > 0) {
-      enablePowerPins(PORTC3, PORTC2);
-    }
-
-    if(delayTime > 0) {
-      i2cReadDelayTime = delayTime;
-    }
-
-    if(argc > 6) {
-      // If you extend I2C_Config, handle your data here
-    }
-
-  }
-}
-
-void systemResetCallback()
-{
-  readingContinuously = false;
-  queryIndex = 0;
-}
-
-/* reference: BlinkM_funcs.h by Tod E. Kurt, ThingM, http://thingm.com/ */
-// Enables Pins A2 and A3 to be used as GND and Power
-// so that I2C devices can be plugged directly
-// into Arduino header (pins A2 - A5)
-static void enablePowerPins(byte pwrpin, byte gndpin)
-{
-  if(powerPinsEnabled == 0) {
-    DDRC |= _BV(pwrpin) | _BV(gndpin);
-    PORTC &=~ _BV(gndpin);
-    PORTC |=  _BV(pwrpin);
-    powerPinsEnabled = 1;
-    Firmata.sendString("Power pins enabled");
-    delay(100);
-  }
-}
-
-void setup()
-{
-  Firmata.setFirmwareVersion(2, 0);
-
-  Firmata.attach(START_SYSEX, sysexCallback);
-  Firmata.attach(SYSTEM_RESET, systemResetCallback);
-
-  for (int i = 0; i < TOTAL_PINS; ++i) {
-    pinMode(i, OUTPUT);
-  }
-
-  Firmata.begin(57600);  
-  Wire.begin();
-}
-
-void loop()
-{
-  while (Firmata.available()) {
-    Firmata.processInput();
-  }
-
-  currentMillis = millis();
-  if (currentMillis - previousMillis > samplingInterval) {
-    previousMillis += samplingInterval;
-
-    for (byte i = 0; i < queryIndex; i++) {
-      readAndReportData(query[i].addr, query[i].reg, query[i].bytes);
-    }
-  }
-}
diff --git a/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt b/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
deleted file mode 100644
index 77cec6d..0000000
--- a/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt
+++ /dev/null
@@ -1,458 +0,0 @@
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
diff --git a/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino b/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino
deleted file mode 100644
index d306c70..0000000
--- a/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.ino
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/*
-  Copyright (C) 2006-2008 Hans-Christoph Steiner.  All rights reserved.
- 
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
- 
-  See file LICENSE.txt for further informations on licensing terms.
- */
-
-/* 
- * This is an old version of StandardFirmata (v2.0).  It is kept here because
- * its the last version that works on an ATMEGA8 chip.  Also, it can be used
- * for host software that has not been updated to a newer version of the
- * protocol.  It also uses the old baud rate of 115200 rather than 57600.
- */
-
-#include <EEPROM.h>
-#include <Firmata.h>
-
-/*==============================================================================
- * GLOBAL VARIABLES
- *============================================================================*/
-
-/* analog inputs */
-int analogInputsToReport = 0; // bitwise array to store pin reporting
-int analogPin = 0; // counter for reading analog pins
-
-/* digital pins */
-byte reportPINs[TOTAL_PORTS];   // PIN == input port
-byte previousPINs[TOTAL_PORTS]; // PIN == input port
-byte pinStatus[TOTAL_PINS]; // store pin status, default OUTPUT
-byte portStatus[TOTAL_PORTS];
-
-/* timer variables */
-unsigned long currentMillis;     // store the current value from millis()
-unsigned long previousMillis;    // for comparison with currentMillis
-
-
-/*==============================================================================
- * FUNCTIONS                                                                
- *============================================================================*/
-
-void outputPort(byte portNumber, byte portValue)
-{
-  portValue = portValue &~ portStatus[portNumber];
-  if(previousPINs[portNumber] != portValue) {
-        Firmata.sendDigitalPort(portNumber, portValue); 
-        previousPINs[portNumber] = portValue;
-        Firmata.sendDigitalPort(portNumber, portValue); 
-    }
-}
-
-/* -----------------------------------------------------------------------------
- * check all the active digital inputs for change of state, then add any events
- * to the Serial output queue using Serial.print() */
-void checkDigitalInputs(void) 
-{
-    byte i, tmp;
-    for(i=0; i < TOTAL_PORTS; i++) {
-        if(reportPINs[i]) {
-            switch(i) {
-            case 0: outputPort(0, PIND &~ B00000011); break; // ignore Rx/Tx 0/1
-            case 1: outputPort(1, PINB); break;
-            case 2: outputPort(2, PINC); break;
-            }
-        }
-    }
-}
-
-// -----------------------------------------------------------------------------
-/* sets the pin mode to the correct state and sets the relevant bits in the
- * two bit-arrays that track Digital I/O and PWM status
- */
-void setPinModeCallback(byte pin, int mode) {
-    byte port = 0;
-    byte offset = 0;
-
-    if (pin < 8) {
-      port = 0;
-      offset = 0;
-    } else if (pin < 14) {
-      port = 1;
-      offset = 8;     
-    } else if (pin < 22) {
-      port = 2;
-      offset = 14;
-    }
-
-    if(pin > 1) { // ignore RxTx (pins 0 and 1)
-        pinStatus[pin] = mode;
-        switch(mode) {
-        case INPUT:
-            pinMode(pin, INPUT);
-            portStatus[port] = portStatus[port] &~ (1 << (pin - offset));
-            break;
-        case OUTPUT:
-            digitalWrite(pin, LOW); // disable PWM
-        case PWM:
-            pinMode(pin, OUTPUT);
-            portStatus[port] = portStatus[port] | (1 << (pin - offset));
-            break;
-        //case ANALOG: // TODO figure this out
-        default:
-            Firmata.sendString("");
-        }
-        // TODO: save status to EEPROM here, if changed
-    }
-}
-
-void analogWriteCallback(byte pin, int value)
-{
-    setPinModeCallback(pin,PWM);
-    analogWrite(pin, value);
-}
-
-void digitalWriteCallback(byte port, int value)
-{
-    switch(port) {
-    case 0: // pins 2-7 (don't change Rx/Tx, pins 0 and 1)
-        // 0xFF03 == B1111111100000011    0x03 == B00000011
-        PORTD = (value &~ 0xFF03) | (PORTD & 0x03);
-        break;
-    case 1: // pins 8-13 (14,15 are disabled for the crystal) 
-        PORTB = (byte)value;
-        break;
-    case 2: // analog pins used as digital
-        PORTC = (byte)value;
-        break;
-    }
-}
-
-// -----------------------------------------------------------------------------
-/* sets bits in a bit array (int) to toggle the reporting of the analogIns
- */
-//void FirmataClass::setAnalogPinReporting(byte pin, byte state) {
-//}
-void reportAnalogCallback(byte pin, int value)
-{
-    if(value == 0) {
-        analogInputsToReport = analogInputsToReport &~ (1 << pin);
-    }
-    else { // everything but 0 enables reporting of that pin
-        analogInputsToReport = analogInputsToReport | (1 << pin);
-    }
-    // TODO: save status to EEPROM here, if changed
-}
-
-void reportDigitalCallback(byte port, int value)
-{
-    reportPINs[port] = (byte)value;
-    if(port == 2) // turn off analog reporting when used as digital
-        analogInputsToReport = 0;
-}
-
-/*==============================================================================
- * SETUP()
- *============================================================================*/
-void setup() 
-{
-    byte i;
-
-    Firmata.setFirmwareVersion(2, 0);
-
-    Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
-    Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback);
-    Firmata.attach(REPORT_ANALOG, reportAnalogCallback);
-    Firmata.attach(REPORT_DIGITAL, reportDigitalCallback);
-    Firmata.attach(SET_PIN_MODE, setPinModeCallback);
-
-    portStatus[0] = B00000011;  // ignore Tx/RX pins
-    portStatus[1] = B11000000;  // ignore 14/15 pins 
-    portStatus[2] = B00000000;
-
-//    for(i=0; i<TOTAL_PINS; ++i) { // TODO make this work with analogs
-    for(i=0; i<14; ++i) {
-        setPinModeCallback(i,OUTPUT);
-    }
-    // set all outputs to 0 to make sure internal pull-up resistors are off
-    PORTB = 0; // pins 8-15
-    PORTC = 0; // analog port
-    PORTD = 0; // pins 0-7
-
-    // TODO rethink the init, perhaps it should report analog on default
-    for(i=0; i<TOTAL_PORTS; ++i) {
-        reportPINs[i] = false;
-    }
-    // TODO: load state from EEPROM here
-
-    /* send digital inputs here, if enabled, to set the initial state on the
-     * host computer, since once in the loop(), this firmware will only send
-     * digital data on change. */
-    if(reportPINs[0]) outputPort(0, PIND &~ B00000011); // ignore Rx/Tx 0/1
-    if(reportPINs[1]) outputPort(1, PINB);
-    if(reportPINs[2]) outputPort(2, PINC);
-
-    Firmata.begin(115200);
-}
-
-/*==============================================================================
- * LOOP()
- *============================================================================*/
-void loop() 
-{
-/* DIGITALREAD - as fast as possible, check for changes and output them to the
- * FTDI buffer using Serial.print()  */
-    checkDigitalInputs();  
-    currentMillis = millis();
-    if(currentMillis - previousMillis > 20) {  
-        previousMillis += 20;     // run this every 20ms
-        /* SERIALREAD - Serial.read() uses a 128 byte circular buffer, so handle
-         * all serialReads at once, i.e. empty the buffer */
-        while(Firmata.available())
-            Firmata.processInput();
-        /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over
-         * 60 bytes. use a timer to sending an event character every 4 ms to
-         * trigger the buffer to dump. */
-	
-        /* ANALOGREAD - right after the event character, do all of the
-         * analogReads().  These only need to be done every 4ms. */
-        for(analogPin=0;analogPin<TOTAL_ANALOG_PINS;analogPin++) {
-            if( analogInputsToReport & (1 << analogPin) ) {
-                Firmata.sendAnalog(analogPin, analogRead(analogPin));
-            }
-        }
-    }
-}
diff --git a/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino b/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino
deleted file mode 100644
index cdcfff0..0000000
--- a/libraries/Firmata/examples/ServoFirmata/ServoFirmata.ino
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/* This firmware supports as many servos as possible using the Servo library 
- * included in Arduino 0017
- *
- * TODO add message to configure minPulse/maxPulse/degrees
- *
- * This example code is in the public domain.
- */
- 
-#include <Servo.h>
-#include <Firmata.h>
-
-Servo servos[MAX_SERVOS];
-
-void analogWriteCallback(byte pin, int value)
-{
-    if (IS_PIN_SERVO(pin)) {
-        servos[PIN_TO_SERVO(pin)].write(value);
-    }
-}
-
-void setup() 
-{
-    byte pin;
-
-    Firmata.setFirmwareVersion(0, 2);
-    Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
-
-    for (pin=0; pin < TOTAL_PINS; pin++) {
-        if (IS_PIN_SERVO(pin)) {
-	    servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin));
-        }
-    }
-   
-    Firmata.begin(57600);
-}
-
-void loop() 
-{
-    while(Firmata.available())
-        Firmata.processInput();
-}
-
diff --git a/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino b/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino
deleted file mode 100644
index 44ea91e..0000000
--- a/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.ino
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/* Supports as many analog inputs and analog PWM outputs as possible.
- *
- * This example code is in the public domain.
- */
-#include <Firmata.h>
-
-byte analogPin = 0;
-
-void analogWriteCallback(byte pin, int value)
-{
-    if (IS_PIN_PWM(pin)) {
-        pinMode(PIN_TO_DIGITAL(pin), OUTPUT);
-        analogWrite(PIN_TO_PWM(pin), value);
-    }
-}
-
-void setup()
-{
-    Firmata.setFirmwareVersion(0, 1);
-    Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
-    Firmata.begin(57600);
-}
-
-void loop()
-{
-    while(Firmata.available()) {
-        Firmata.processInput();
-    }
-    // do one analogRead per loop, so if PC is sending a lot of
-    // analog write messages, we will only delay 1 analogRead
-    Firmata.sendAnalog(analogPin, analogRead(analogPin)); 
-    analogPin = analogPin + 1;
-    if (analogPin >= TOTAL_ANALOG_PINS) analogPin = 0;
-}
-
diff --git a/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino b/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino
deleted file mode 100644
index a0d764f..0000000
--- a/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.ino
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/* Supports as many digital inputs and outputs as possible.
- *
- * This example code is in the public domain.
- */
-#include <Firmata.h>
-
-byte previousPIN[TOTAL_PORTS];  // PIN means PORT for input
-byte previousPORT[TOTAL_PORTS]; 
-
-void outputPort(byte portNumber, byte portValue)
-{
-    // only send the data when it changes, otherwise you get too many messages!
-    if (previousPIN[portNumber] != portValue) {
-        Firmata.sendDigitalPort(portNumber, portValue); 
-        previousPIN[portNumber] = portValue;
-    }
-}
-
-void setPinModeCallback(byte pin, int mode) {
-    if (IS_PIN_DIGITAL(pin)) {
-        pinMode(PIN_TO_DIGITAL(pin), mode);
-    }
-}
-
-void digitalWriteCallback(byte port, int value)
-{
-    byte i;
-    byte currentPinValue, previousPinValue;
-
-    if (port < TOTAL_PORTS && value != previousPORT[port]) {
-        for(i=0; i<8; i++) {
-            currentPinValue = (byte) value & (1 << i);
-            previousPinValue = previousPORT[port] & (1 << i);
-            if(currentPinValue != previousPinValue) {
-                digitalWrite(i + (port*8), currentPinValue);
-            }
-        }
-        previousPORT[port] = value;
-    }
-}
-
-void setup()
-{
-    Firmata.setFirmwareVersion(0, 1);
-    Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback);
-    Firmata.attach(SET_PIN_MODE, setPinModeCallback);
-    Firmata.begin(57600);
-}
-
-void loop()
-{
-    byte i;
-
-    for (i=0; i<TOTAL_PORTS; i++) {
-        outputPort(i, readPort(i, 0xff));
-    }
-
-    while(Firmata.available()) {
-        Firmata.processInput();
-    }
-}
diff --git a/libraries/Firmata/examples/StandardFirmata/LICENSE.txt b/libraries/Firmata/examples/StandardFirmata/LICENSE.txt
deleted file mode 100644
index 77cec6d..0000000
--- a/libraries/Firmata/examples/StandardFirmata/LICENSE.txt
+++ /dev/null
@@ -1,458 +0,0 @@
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
diff --git a/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino b/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino
deleted file mode 100644
index 1a987ee..0000000
--- a/libraries/Firmata/examples/StandardFirmata/StandardFirmata.ino
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Firmata is a generic protocol for communicating with microcontrollers
- * from software on a host computer. It is intended to work with
- * any host computer software package.
- *
- * To download a host software package, please clink on the following link
- * to open the download page in your default browser.
- *
- * http://firmata.org/wiki/Download
- */
-
-/*
-  Copyright (C) 2006-2008 Hans-Christoph Steiner.  All rights reserved.
-  Copyright (C) 2010-2011 Paul Stoffregen.  All rights reserved.
-  Copyright (C) 2009 Shigeru Kobayashi.  All rights reserved.
-  Copyright (C) 2009-2011 Jeff Hoefs.  All rights reserved.
-  
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
- 
-  See file LICENSE.txt for further informations on licensing terms.
-
-  formatted using the GNU C formatting and indenting
-*/
-
-/* 
- * TODO: use Program Control to load stored profiles from EEPROM
- */
-
-#include <Servo.h>
-#include <Wire.h>
-#include <Firmata.h>
-
-// move the following defines to Firmata.h?
-#define I2C_WRITE B00000000
-#define I2C_READ B00001000
-#define I2C_READ_CONTINUOUSLY B00010000
-#define I2C_STOP_READING B00011000
-#define I2C_READ_WRITE_MODE_MASK B00011000
-#define I2C_10BIT_ADDRESS_MODE_MASK B00100000
-
-#define MAX_QUERIES 8
-#define MINIMUM_SAMPLING_INTERVAL 10
-
-#define REGISTER_NOT_SPECIFIED -1
-
-/*==============================================================================
- * GLOBAL VARIABLES
- *============================================================================*/
-
-/* analog inputs */
-int analogInputsToReport = 0; // bitwise array to store pin reporting
-
-/* digital input ports */
-byte reportPINs[TOTAL_PORTS];       // 1 = report this port, 0 = silence
-byte previousPINs[TOTAL_PORTS];     // previous 8 bits sent
-
-/* pins configuration */
-byte pinConfig[TOTAL_PINS];         // configuration of every pin
-byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else
-int pinState[TOTAL_PINS];           // any value that has been written
-
-/* timer variables */
-unsigned long currentMillis;        // store the current value from millis()
-unsigned long previousMillis;       // for comparison with currentMillis
-int samplingInterval = 19;          // how often to run the main loop (in ms)
-
-/* i2c data */
-struct i2c_device_info {
-  byte addr;
-  byte reg;
-  byte bytes;
-};
-
-/* for i2c read continuous more */
-i2c_device_info query[MAX_QUERIES];
-
-byte i2cRxData[32];
-boolean isI2CEnabled = false;
-signed char queryIndex = -1;
-unsigned int i2cReadDelayTime = 0;  // default delay time between i2c read request and Wire.requestFrom()
-
-Servo servos[MAX_SERVOS];
-/*==============================================================================
- * FUNCTIONS
- *============================================================================*/
-
-void readAndReportData(byte address, int theRegister, byte numBytes) {
-  // allow I2C requests that don't require a register read
-  // for example, some devices using an interrupt pin to signify new data available
-  // do not always require the register read so upon interrupt you call Wire.requestFrom()  
-  if (theRegister != REGISTER_NOT_SPECIFIED) {
-    Wire.beginTransmission(address);
-    #if ARDUINO >= 100
-    Wire.write((byte)theRegister);
-    #else
-    Wire.send((byte)theRegister);
-    #endif
-    Wire.endTransmission();
-    delayMicroseconds(i2cReadDelayTime);  // delay is necessary for some devices such as WiiNunchuck
-  } else {
-    theRegister = 0;  // fill the register with a dummy value
-  }
-
-  Wire.requestFrom(address, numBytes);  // all bytes are returned in requestFrom
-
-  // check to be sure correct number of bytes were returned by slave
-  if(numBytes == Wire.available()) {
-    i2cRxData[0] = address;
-    i2cRxData[1] = theRegister;
-    for (int i = 0; i < numBytes; i++) {
-      #if ARDUINO >= 100
-      i2cRxData[2 + i] = Wire.read();
-      #else
-      i2cRxData[2 + i] = Wire.receive();
-      #endif
-    }
-  }
-  else {
-    if(numBytes > Wire.available()) {
-      Firmata.sendString("I2C Read Error: Too many bytes received");
-    } else {
-      Firmata.sendString("I2C Read Error: Too few bytes received"); 
-    }
-  }
-
-  // send slave address, register and received bytes
-  Firmata.sendSysex(SYSEX_I2C_REPLY, numBytes + 2, i2cRxData);
-}
-
-void outputPort(byte portNumber, byte portValue, byte forceSend)
-{
-  // pins not configured as INPUT are cleared to zeros
-  portValue = portValue & portConfigInputs[portNumber];
-  // only send if the value is different than previously sent
-  if(forceSend || previousPINs[portNumber] != portValue) {
-    Firmata.sendDigitalPort(portNumber, portValue);
-    previousPINs[portNumber] = portValue;
-  }
-}
-
-/* -----------------------------------------------------------------------------
- * check all the active digital inputs for change of state, then add any events
- * to the Serial output queue using Serial.print() */
-void checkDigitalInputs(void)
-{
-  /* Using non-looping code allows constants to be given to readPort().
-   * The compiler will apply substantial optimizations if the inputs
-   * to readPort() are compile-time constants. */
-  if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false);
-  if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false);
-  if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false);
-  if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false);
-  if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false);
-  if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false);
-  if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false);
-  if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false);
-  if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false);
-  if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false);
-  if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false);
-  if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false);
-  if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false);
-  if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false);
-  if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false);
-  if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false);
-}
-
-// -----------------------------------------------------------------------------
-/* sets the pin mode to the correct state and sets the relevant bits in the
- * two bit-arrays that track Digital I/O and PWM status
- */
-void setPinModeCallback(byte pin, int mode)
-{
-  if (pinConfig[pin] == I2C && isI2CEnabled && mode != I2C) {
-    // disable i2c so pins can be used for other functions
-    // the following if statements should reconfigure the pins properly
-    disableI2CPins();
-  }
-  if (IS_PIN_SERVO(pin) && mode != SERVO && servos[PIN_TO_SERVO(pin)].attached()) {
-    servos[PIN_TO_SERVO(pin)].detach();
-  }
-  if (IS_PIN_ANALOG(pin)) {
-    reportAnalogCallback(PIN_TO_ANALOG(pin), mode == ANALOG ? 1 : 0); // turn on/off reporting
-  }
-  if (IS_PIN_DIGITAL(pin)) {
-    if (mode == INPUT) {
-      portConfigInputs[pin/8] |= (1 << (pin & 7));
-    } else {
-      portConfigInputs[pin/8] &= ~(1 << (pin & 7));
-    }
-  }
-  pinState[pin] = 0;
-  switch(mode) {
-  case ANALOG:
-    if (IS_PIN_ANALOG(pin)) {
-      if (IS_PIN_DIGITAL(pin)) {
-        pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver
-        digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups
-      }
-      pinConfig[pin] = ANALOG;
-    }
-    break;
-  case INPUT:
-    if (IS_PIN_DIGITAL(pin)) {
-      pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver
-      digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups
-      pinConfig[pin] = INPUT;
-    }
-    break;
-  case OUTPUT:
-    if (IS_PIN_DIGITAL(pin)) {
-      digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable PWM
-      pinMode(PIN_TO_DIGITAL(pin), OUTPUT);
-      pinConfig[pin] = OUTPUT;
-    }
-    break;
-  case PWM:
-    if (IS_PIN_PWM(pin)) {
-      pinMode(PIN_TO_PWM(pin), OUTPUT);
-      analogWrite(PIN_TO_PWM(pin), 0);
-      pinConfig[pin] = PWM;
-    }
-    break;
-  case SERVO:
-    if (IS_PIN_SERVO(pin)) {
-      pinConfig[pin] = SERVO;
-      if (!servos[PIN_TO_SERVO(pin)].attached()) {
-          servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin));
-      }
-    }
-    break;
-  case I2C:
-    if (IS_PIN_I2C(pin)) {
-      // mark the pin as i2c
-      // the user must call I2C_CONFIG to enable I2C for a device
-      pinConfig[pin] = I2C;
-    }
-    break;
-  default:
-    Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM
-  }
-  // TODO: save status to EEPROM here, if changed
-}
-
-void analogWriteCallback(byte pin, int value)
-{
-  if (pin < TOTAL_PINS) {
-    switch(pinConfig[pin]) {
-    case SERVO:
-      if (IS_PIN_SERVO(pin))
-        servos[PIN_TO_SERVO(pin)].write(value);
-        pinState[pin] = value;
-      break;
-    case PWM:
-      if (IS_PIN_PWM(pin))
-        analogWrite(PIN_TO_PWM(pin), value);
-        pinState[pin] = value;
-      break;
-    }
-  }
-}
-
-void digitalWriteCallback(byte port, int value)
-{
-  byte pin, lastPin, mask=1, pinWriteMask=0;
-
-  if (port < TOTAL_PORTS) {
-    // create a mask of the pins on this port that are writable.
-    lastPin = port*8+8;
-    if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS;
-    for (pin=port*8; pin < lastPin; pin++) {
-      // do not disturb non-digital pins (eg, Rx & Tx)
-      if (IS_PIN_DIGITAL(pin)) {
-        // only write to OUTPUT and INPUT (enables pullup)
-        // do not touch pins in PWM, ANALOG, SERVO or other modes
-        if (pinConfig[pin] == OUTPUT || pinConfig[pin] == INPUT) {
-          pinWriteMask |= mask;
-          pinState[pin] = ((byte)value & mask) ? 1 : 0;
-        }
-      }
-      mask = mask << 1;
-    }
-    writePort(port, (byte)value, pinWriteMask);
-  }
-}
-
-
-// -----------------------------------------------------------------------------
-/* sets bits in a bit array (int) to toggle the reporting of the analogIns
- */
-//void FirmataClass::setAnalogPinReporting(byte pin, byte state) {
-//}
-void reportAnalogCallback(byte analogPin, int value)
-{
-  if (analogPin < TOTAL_ANALOG_PINS) {
-    if(value == 0) {
-      analogInputsToReport = analogInputsToReport &~ (1 << analogPin);
-    } else {
-      analogInputsToReport = analogInputsToReport | (1 << analogPin);
-    }
-  }
-  // TODO: save status to EEPROM here, if changed
-}
-
-void reportDigitalCallback(byte port, int value)
-{
-  if (port < TOTAL_PORTS) {
-    reportPINs[port] = (byte)value;
-  }
-  // do not disable analog reporting on these 8 pins, to allow some
-  // pins used for digital, others analog.  Instead, allow both types
-  // of reporting to be enabled, but check if the pin is configured
-  // as analog when sampling the analog inputs.  Likewise, while
-  // scanning digital pins, portConfigInputs will mask off values from any
-  // pins configured as analog
-}
-
-/*==============================================================================
- * SYSEX-BASED commands
- *============================================================================*/
-
-void sysexCallback(byte command, byte argc, byte *argv)
-{
-  byte mode;
-  byte slaveAddress;
-  byte slaveRegister;
-  byte data;
-  unsigned int delayTime; 
-  
-  switch(command) {
-  case I2C_REQUEST:
-    mode = argv[1] & I2C_READ_WRITE_MODE_MASK;
-    if (argv[1] & I2C_10BIT_ADDRESS_MODE_MASK) {
-      Firmata.sendString("10-bit addressing mode is not yet supported");
-      return;
-    }
-    else {
-      slaveAddress = argv[0];
-    }
-
-    switch(mode) {
-    case I2C_WRITE:
-      Wire.beginTransmission(slaveAddress);
-      for (byte i = 2; i < argc; i += 2) {
-        data = argv[i] + (argv[i + 1] << 7);
-        #if ARDUINO >= 100
-        Wire.write(data);
-        #else
-        Wire.send(data);
-        #endif
-      }
-      Wire.endTransmission();
-      delayMicroseconds(70);
-      break;
-    case I2C_READ:
-      if (argc == 6) {
-        // a slave register is specified
-        slaveRegister = argv[2] + (argv[3] << 7);
-        data = argv[4] + (argv[5] << 7);  // bytes to read
-        readAndReportData(slaveAddress, (int)slaveRegister, data);
-      }
-      else {
-        // a slave register is NOT specified
-        data = argv[2] + (argv[3] << 7);  // bytes to read
-        readAndReportData(slaveAddress, (int)REGISTER_NOT_SPECIFIED, data);
-      }
-      break;
-    case I2C_READ_CONTINUOUSLY:
-      if ((queryIndex + 1) >= MAX_QUERIES) {
-        // too many queries, just ignore
-        Firmata.sendString("too many queries");
-        break;
-      }
-      queryIndex++;
-      query[queryIndex].addr = slaveAddress;
-      query[queryIndex].reg = argv[2] + (argv[3] << 7);
-      query[queryIndex].bytes = argv[4] + (argv[5] << 7);
-      break;
-    case I2C_STOP_READING:
-	  byte queryIndexToSkip;      
-      // if read continuous mode is enabled for only 1 i2c device, disable
-      // read continuous reporting for that device
-      if (queryIndex <= 0) {
-        queryIndex = -1;        
-      } else {
-        // if read continuous mode is enabled for multiple devices,
-        // determine which device to stop reading and remove it's data from
-        // the array, shifiting other array data to fill the space
-        for (byte i = 0; i < queryIndex + 1; i++) {
-          if (query[i].addr = slaveAddress) {
-            queryIndexToSkip = i;
-            break;
-          }
-        }
-        
-        for (byte i = queryIndexToSkip; i<queryIndex + 1; i++) {
-          if (i < MAX_QUERIES) {
-            query[i].addr = query[i+1].addr;
-            query[i].reg = query[i+1].addr;
-            query[i].bytes = query[i+1].bytes; 
-          }
-        }
-        queryIndex--;
-      }
-      break;
-    default:
-      break;
-    }
-    break;
-  case I2C_CONFIG:
-    delayTime = (argv[0] + (argv[1] << 7));
-
-    if(delayTime > 0) {
-      i2cReadDelayTime = delayTime;
-    }
-
-    if (!isI2CEnabled) {
-      enableI2CPins();
-    }
-    
-    break;
-  case SERVO_CONFIG:
-    if(argc > 4) {
-      // these vars are here for clarity, they'll optimized away by the compiler
-      byte pin = argv[0];
-      int minPulse = argv[1] + (argv[2] << 7);
-      int maxPulse = argv[3] + (argv[4] << 7);
-
-      if (IS_PIN_SERVO(pin)) {
-        if (servos[PIN_TO_SERVO(pin)].attached())
-          servos[PIN_TO_SERVO(pin)].detach();
-        servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse);
-        setPinModeCallback(pin, SERVO);
-      }
-    }
-    break;
-  case SAMPLING_INTERVAL:
-    if (argc > 1) {
-      samplingInterval = argv[0] + (argv[1] << 7);
-      if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) {
-        samplingInterval = MINIMUM_SAMPLING_INTERVAL;
-      }      
-    } else {
-      //Firmata.sendString("Not enough data");
-    }
-    break;
-  case EXTENDED_ANALOG:
-    if (argc > 1) {
-      int val = argv[1];
-      if (argc > 2) val |= (argv[2] << 7);
-      if (argc > 3) val |= (argv[3] << 14);
-      analogWriteCallback(argv[0], val);
-    }
-    break;
-  case CAPABILITY_QUERY:
-    Serial.write(START_SYSEX);
-    Serial.write(CAPABILITY_RESPONSE);
-    for (byte pin=0; pin < TOTAL_PINS; pin++) {
-      if (IS_PIN_DIGITAL(pin)) {
-        Serial.write((byte)INPUT);
-        Serial.write(1);
-        Serial.write((byte)OUTPUT);
-        Serial.write(1);
-      }
-      if (IS_PIN_ANALOG(pin)) {
-        Serial.write(ANALOG);
-        Serial.write(10);
-      }
-      if (IS_PIN_PWM(pin)) {
-        Serial.write(PWM);
-        Serial.write(8);
-      }
-      if (IS_PIN_SERVO(pin)) {
-        Serial.write(SERVO);
-        Serial.write(14);
-      }
-      if (IS_PIN_I2C(pin)) {
-        Serial.write(I2C);
-        Serial.write(1);  // to do: determine appropriate value 
-      }
-      Serial.write(127);
-    }
-    Serial.write(END_SYSEX);
-    break;
-  case PIN_STATE_QUERY:
-    if (argc > 0) {
-      byte pin=argv[0];
-      Serial.write(START_SYSEX);
-      Serial.write(PIN_STATE_RESPONSE);
-      Serial.write(pin);
-      if (pin < TOTAL_PINS) {
-        Serial.write((byte)pinConfig[pin]);
-	Serial.write((byte)pinState[pin] & 0x7F);
-	if (pinState[pin] & 0xFF80) Serial.write((byte)(pinState[pin] >> 7) & 0x7F);
-	if (pinState[pin] & 0xC000) Serial.write((byte)(pinState[pin] >> 14) & 0x7F);
-      }
-      Serial.write(END_SYSEX);
-    }
-    break;
-  case ANALOG_MAPPING_QUERY:
-    Serial.write(START_SYSEX);
-    Serial.write(ANALOG_MAPPING_RESPONSE);
-    for (byte pin=0; pin < TOTAL_PINS; pin++) {
-      Serial.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127);
-    }
-    Serial.write(END_SYSEX);
-    break;
-  }
-}
-
-void enableI2CPins()
-{
-  byte i;
-  // is there a faster way to do this? would probaby require importing 
-  // Arduino.h to get SCL and SDA pins
-  for (i=0; i < TOTAL_PINS; i++) {
-    if(IS_PIN_I2C(i)) {
-      // mark pins as i2c so they are ignore in non i2c data requests
-      setPinModeCallback(i, I2C);
-    } 
-  }
-   
-  isI2CEnabled = true; 
-  
-  // is there enough time before the first I2C request to call this here?
-  Wire.begin();
-}
-
-/* disable the i2c pins so they can be used for other functions */
-void disableI2CPins() {
-    isI2CEnabled = false;
-    // disable read continuous mode for all devices
-    queryIndex = -1;
-    // uncomment the following if or when the end() method is added to Wire library
-    // Wire.end();
-}
-
-/*==============================================================================
- * SETUP()
- *============================================================================*/
-
-void systemResetCallback()
-{
-  // initialize a defalt state
-  // TODO: option to load config from EEPROM instead of default
-  if (isI2CEnabled) {
-  	disableI2CPins();
-  }
-  for (byte i=0; i < TOTAL_PORTS; i++) {
-    reportPINs[i] = false;      // by default, reporting off
-    portConfigInputs[i] = 0;	// until activated
-    previousPINs[i] = 0;
-  }
-  // pins with analog capability default to analog input
-  // otherwise, pins default to digital output
-  for (byte i=0; i < TOTAL_PINS; i++) {
-    if (IS_PIN_ANALOG(i)) {
-      // turns off pullup, configures everything
-      setPinModeCallback(i, ANALOG);
-    } else {
-      // sets the output to 0, configures portConfigInputs
-      setPinModeCallback(i, OUTPUT);
-    }
-  }
-  // by default, do not report any analog inputs
-  analogInputsToReport = 0;
-
-  /* send digital inputs to set the initial state on the host computer,
-   * since once in the loop(), this firmware will only send on change */
-  /*
-  TODO: this can never execute, since no pins default to digital input
-        but it will be needed when/if we support EEPROM stored config
-  for (byte i=0; i < TOTAL_PORTS; i++) {
-    outputPort(i, readPort(i, portConfigInputs[i]), true);
-  }
-  */
-}
-
-void setup() 
-{
-  Firmata.setFirmwareVersion(FIRMATA_MAJOR_VERSION, FIRMATA_MINOR_VERSION);
-
-  Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
-  Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback);
-  Firmata.attach(REPORT_ANALOG, reportAnalogCallback);
-  Firmata.attach(REPORT_DIGITAL, reportDigitalCallback);
-  Firmata.attach(SET_PIN_MODE, setPinModeCallback);
-  Firmata.attach(START_SYSEX, sysexCallback);
-  Firmata.attach(SYSTEM_RESET, systemResetCallback);
-
-  Firmata.begin(57600);
-  systemResetCallback();  // reset to default config
-}
-
-/*==============================================================================
- * LOOP()
- *============================================================================*/
-void loop() 
-{
-  byte pin, analogPin;
-
-  /* DIGITALREAD - as fast as possible, check for changes and output them to the
-   * FTDI buffer using Serial.print()  */
-  checkDigitalInputs();  
-
-  /* SERIALREAD - processing incoming messagse as soon as possible, while still
-   * checking digital inputs.  */
-  while(Firmata.available())
-    Firmata.processInput();
-
-  /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over
-   * 60 bytes. use a timer to sending an event character every 4 ms to
-   * trigger the buffer to dump. */
-
-  currentMillis = millis();
-  if (currentMillis - previousMillis > samplingInterval) {
-    previousMillis += samplingInterval;
-    /* ANALOGREAD - do all analogReads() at the configured sampling interval */
-    for(pin=0; pin<TOTAL_PINS; pin++) {
-      if (IS_PIN_ANALOG(pin) && pinConfig[pin] == ANALOG) {
-        analogPin = PIN_TO_ANALOG(pin);
-        if (analogInputsToReport & (1 << analogPin)) {
-          Firmata.sendAnalog(analogPin, analogRead(analogPin));
-        }
-      }
-    }
-    // report i2c data for all device with read continuous mode enabled
-    if (queryIndex > -1) {
-      for (byte i = 0; i < queryIndex + 1; i++) {
-        readAndReportData(query[i].addr, query[i].reg, query[i].bytes);
-      }
-    }
-  }
-}
diff --git a/libraries/Firmata/keywords.txt b/libraries/Firmata/keywords.txt
deleted file mode 100644
index 52e0a9c..0000000
--- a/libraries/Firmata/keywords.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-#######################################
-# Syntax Coloring Map For Firmata
-#######################################
-
-#######################################
-# Datatypes (KEYWORD1)
-#######################################
-
-Firmata	KEYWORD1
-callbackFunction	KEYWORD1
-systemResetCallbackFunction	KEYWORD1
-stringCallbackFunction	KEYWORD1
-sysexCallbackFunction	KEYWORD1
-
-#######################################
-# Methods and Functions (KEYWORD2)
-#######################################
-
-begin	KEYWORD2
-begin	KEYWORD2
-printVersion	KEYWORD2
-blinkVersion	KEYWORD2
-printFirmwareVersion	KEYWORD2
-setFirmwareVersion	KEYWORD2
-setFirmwareNameAndVersion	KEYWORD2
-available	KEYWORD2
-processInput	KEYWORD2
-sendAnalog	KEYWORD2
-sendDigital	KEYWORD2
-sendDigitalPortPair	KEYWORD2
-sendDigitalPort	KEYWORD2
-sendString	KEYWORD2
-sendString	KEYWORD2
-sendSysex	KEYWORD2
-attach	KEYWORD2
-detach	KEYWORD2
-flush	KEYWORD2
-
-
-#######################################
-# Constants (LITERAL1)
-#######################################
-
-MAX_DATA_BYTES	LITERAL1
-
-DIGITAL_MESSAGE	LITERAL1
-ANALOG_MESSAGE	LITERAL1
-REPORT_ANALOG	LITERAL1
-REPORT_DIGITAL	LITERAL1
-REPORT_VERSION	LITERAL1
-SET_PIN_MODE	LITERAL1
-SYSTEM_RESET	LITERAL1
-
-START_SYSEX	LITERAL1
-END_SYSEX	LITERAL1
-
-PWM	LITERAL1
-
-TOTAL_ANALOG_PINS	LITERAL1
-TOTAL_DIGITAL_PINS	LITERAL1
-TOTAL_PORTS			LITERAL1
-ANALOG_PORT			LITERAL1