Examples: mass code format. See example_formatter.conf

1 files changed, 3 insertions, 6 deletions

diff --git a/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
index d97a9e3..4d0a68f 100644
--- a/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
+++ b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
@@ -12,16 +12,14 @@
 
 #include <Wire.h>
 
-void setup()
-{
+void setup() {
   Wire.begin();                // join i2c bus (address optional for master)
   Serial.begin(9600);          // start serial communication at 9600bps
 }
 
 int reading = 0;
 
-void loop()
-{
+void loop() {
   // step 1: instruct sensor to read echoes
   Wire.beginTransmission(112); // transmit to device #112 (0x70)
   // the address specified in the datasheet is 224 (0xE0)
@@ -44,8 +42,7 @@ void loop()
   Wire.requestFrom(112, 2);    // request 2 bytes from slave device #112
 
   // step 5: receive reading from sensor
-  if (2 <= Wire.available())   // if two bytes were received
-  {
+  if (2 <= Wire.available()) { // if two bytes were received
     reading = Wire.read();  // receive high byte (overwrites previous reading)
     reading = reading << 8;    // shift high byte to be high 8 bits
     reading |= Wire.read(); // receive low byte as lower 8 bits