Moved WiFi library in the proper place

1 files changed, 121 insertions, 0 deletions

diff --git a/libraries/WiFi/examples/WifiWebClient/WifiWebClient.ino b/libraries/WiFi/examples/WifiWebClient/WifiWebClient.ino
new file mode 100644
index 0000000..17f44a3
--- /dev/null
+++ b/libraries/WiFi/examples/WifiWebClient/WifiWebClient.ino
@@ -0,0 +1,121 @@
+
+/*
+  Web client
+ 
+ This sketch connects to a website (http://www.google.com)
+ using a WiFi shield.
+ 
+ This example is written for a network using WPA encryption. For 
+ WEP or WPA, change the Wifi.begin() call accordingly.
+ 
+ This example is written for a network using WPA encryption. For 
+ WEP or WPA, change the Wifi.begin() call accordingly.
+ 
+ Circuit:
+ * WiFi shield attached
+ 
+ created 13 July 2010
+ by dlf (Metodo2 srl)
+ modified 31 May 2012
+ by Tom Igoe
+ */
+
+
+#include <SPI.h>
+#include <WiFi.h>
+
+char ssid[] = "yourNetwork"; //  your network SSID (name) 
+char pass[] = "secretPassword";    // your network password (use for WPA, or use as key for WEP)
+int keyIndex = 0;            // your network key Index number (needed only for WEP)
+
+int status = WL_IDLE_STATUS;
+// if you don't want to use DNS (and reduce your sketch size)
+// use the numeric IP instead of the name for the server:
+IPAddress server(173,194,73,105);  // numeric IP for Google (no DNS)
+//char server[] = "www.google.com";    // name address for Google (using DNS)
+
+// Initialize the Ethernet client library
+// with the IP address and port of the server 
+// that you want to connect to (port 80 is default for HTTP):
+WiFiClient client;
+
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(9600); 
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+  
+  // check for the presence of the shield:
+  if (WiFi.status() == WL_NO_SHIELD) {
+    Serial.println("WiFi shield not present"); 
+    // don't continue:
+    while(true);
+  } 
+  
+  // attempt to connect to Wifi network:
+  while ( status != WL_CONNECTED) { 
+    Serial.print("Attempting to connect to SSID: ");
+    Serial.println(ssid);
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
+    status = WiFi.begin(ssid, pass);
+  
+    // wait 10 seconds for connection:
+    delay(10000);
+  } 
+  Serial.println("Connected to wifi");
+  printWifiStatus();
+  
+  Serial.println("\nStarting connection to server...");
+  // if you get a connection, report back via serial:
+  if (client.connect(server, 80)) {
+    Serial.println("connected to server");
+    // Make a HTTP request:
+    client.println("GET /search?q=arduino HTTP/1.1");
+    client.println("Host:www.google.com");
+    client.println("Connection: close");
+    client.println();
+  }
+}
+
+void loop() {
+  // if there are incoming bytes available 
+  // from the server, read them and print them:
+  while (client.available()) {
+    char c = client.read();
+    Serial.write(c);
+  }
+
+  // if the server's disconnected, stop the client:
+  if (!client.connected()) {
+    Serial.println();
+    Serial.println("disconnecting from server.");
+    client.stop();
+
+    // do nothing forevermore:
+    while(true);
+  }
+}
+
+
+void printWifiStatus() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal strength (RSSI):");
+  Serial.print(rssi);
+  Serial.println(" dBm");
+}
+
+
+
+
+