WiFi library to the new format

1 files changed, 0 insertions, 121 deletions

diff --git a/libraries/WiFi/examples/WiFiWebClient/WiFiWebClient.ino b/libraries/WiFi/examples/WiFiWebClient/WiFiWebClient.ino
deleted file mode 100644
index 310ec46..0000000
--- a/libraries/WiFi/examples/WiFiWebClient/WiFiWebClient.ino
+++ /dev/null
@@ -1,121 +0,0 @@
-
-/*
-  Web client
- 
- This sketch connects to a website (http://www.google.com)
- using a WiFi shield.
- 
- This example is written for a network using WPA encryption. For 
- WEP or WPA, change the Wifi.begin() call accordingly.
- 
- This example is written for a network using WPA encryption. For 
- WEP or WPA, change the Wifi.begin() call accordingly.
- 
- Circuit:
- * WiFi shield attached
- 
- created 13 July 2010
- by dlf (Metodo2 srl)
- modified 31 May 2012
- by Tom Igoe
- */
-
-
-#include <SPI.h>
-#include <WiFi.h>
-
-char ssid[] = "yourNetwork"; //  your network SSID (name) 
-char pass[] = "secretPassword";    // your network password (use for WPA, or use as key for WEP)
-int keyIndex = 0;            // your network key Index number (needed only for WEP)
-
-int status = WL_IDLE_STATUS;
-// if you don't want to use DNS (and reduce your sketch size)
-// use the numeric IP instead of the name for the server:
-//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
-char server[] = "www.google.com";    // name address for Google (using DNS)
-
-// Initialize the Ethernet client library
-// with the IP address and port of the server 
-// that you want to connect to (port 80 is default for HTTP):
-WiFiClient client;
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-  
-  // attempt to connect to Wifi network:
-  while (status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to SSID: ");
-    Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
-    status = WiFi.begin(ssid, pass);
-  
-    // wait 10 seconds for connection:
-    delay(10000);
-  } 
-  Serial.println("Connected to wifi");
-  printWifiStatus();
-  
-  Serial.println("\nStarting connection to server...");
-  // if you get a connection, report back via serial:
-  if (client.connect(server, 80)) {
-    Serial.println("connected to server");
-    // Make a HTTP request:
-    client.println("GET /search?q=arduino HTTP/1.1");
-    client.println("Host: www.google.com");
-    client.println("Connection: close");
-    client.println();
-  }
-}
-
-void loop() {
-  // if there are incoming bytes available 
-  // from the server, read them and print them:
-  while (client.available()) {
-    char c = client.read();
-    Serial.write(c);
-  }
-
-  // if the server's disconnected, stop the client:
-  if (!client.connected()) {
-    Serial.println();
-    Serial.println("disconnecting from server.");
-    client.stop();
-
-    // do nothing forevermore:
-    while(true);
-  }
-}
-
-
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-}
-
-
-
-
-