Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 112 deletions

diff --git a/libraries/WiFi/examples/WiFiUdpSendReceiveString/WiFiUdpSendReceiveString.ino b/libraries/WiFi/examples/WiFiUdpSendReceiveString/WiFiUdpSendReceiveString.ino
deleted file mode 100644
index eb11295..0000000
--- a/libraries/WiFi/examples/WiFiUdpSendReceiveString/WiFiUdpSendReceiveString.ino
+++ /dev/null
@@ -1,112 +0,0 @@
-
-/*
-  WiFi UDP Send and Receive String
- 
- This sketch wait an UDP packet on localPort using a WiFi shield.
- When a packet is received an Acknowledge packet is sent to the client on port remotePort
- 
- Circuit:
- * WiFi shield attached
- 
- created 30 December 2012
- by dlf (Metodo2 srl)
-
- */
-
-
-#include <SPI.h>
-#include <WiFi.h>
-#include <WiFiUdp.h>
-
-int status = WL_IDLE_STATUS;
-char ssid[] = "yourNetwork"; //  your network SSID (name) 
-char pass[] = "secretPassword";    // your network password (use for WPA, or use as key for WEP)
-int keyIndex = 0;            // your network key Index number (needed only for WEP)
-
-unsigned int localPort = 2390;      // local port to listen on
-
-char packetBuffer[255]; //buffer to hold incoming packet
-char  ReplyBuffer[] = "acknowledged";       // a string to send back
-
-WiFiUDP Udp;
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-  
-  // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to SSID: ");
-    Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
-    status = WiFi.begin(ssid);
-  
-    // wait 10 seconds for connection:
-    delay(10000);
-  } 
-  Serial.println("Connected to wifi");
-  printWifiStatus();
-  
-  Serial.println("\nStarting connection to server...");
-  // if you get a connection, report back via serial:
-  Udp.begin(localPort);  
-}
-
-void loop() {
-    
-  // if there's data available, read a packet
-  int packetSize = Udp.parsePacket();
-  if(packetSize)
-  {   
-    Serial.print("Received packet of size ");
-    Serial.println(packetSize);
-    Serial.print("From ");
-    IPAddress remoteIp = Udp.remoteIP();
-    Serial.print(remoteIp);
-    Serial.print(", port ");
-    Serial.println(Udp.remotePort());
-
-    // read the packet into packetBufffer
-    int len = Udp.read(packetBuffer,255);
-    if (len >0) packetBuffer[len]=0;
-    Serial.println("Contents:");
-    Serial.println(packetBuffer);
-    
-    // send a reply, to the IP address and port that sent us the packet we received
-    Udp.beginPacket(Udp.remoteIP(), Udp.remotePort());
-    Udp.write(ReplyBuffer);
-    Udp.endPacket();
-   }
-}
-
-
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-}
-
-
-
-