Merge remote-tracking branch 'arduino/ide-1.5.x' into ide-1.5.x-discovery

1 files changed, 190 insertions, 0 deletions

diff --git a/libraries/WiFi/examples/WiFiPachubeClient/WiFiPachubeClient.ino b/libraries/WiFi/examples/WiFiPachubeClient/WiFiPachubeClient.ino
new file mode 100644
index 0000000..f8ffc07
--- /dev/null
+++ b/libraries/WiFi/examples/WiFiPachubeClient/WiFiPachubeClient.ino
@@ -0,0 +1,190 @@
+/*
+  Wifi Pachube sensor client
+ 
+ This sketch connects an analog sensor to Pachube (http://www.pachube.com)
+ using an Arduino Wifi shield.
+ 
+ This example is written for a network using WPA encryption. For 
+ WEP or WPA, change the Wifi.begin() call accordingly.
+ 
+ This example has been updated to use version 2.0 of the Pachube API. 
+ To make it work, create a feed with a datastream, and give it the ID
+ sensor1. Or change the code below to match your feed.
+ 
+ Circuit:
+ * Analog sensor attached to analog in 0
+ * Wifi shield attached to pins 10, 11, 12, 13
+ 
+ created 13 Mar 2012
+ modified 31 May 2012
+ by Tom Igoe
+ modified 8 Sept 2012
+ by Scott Fitzgerald
+ 
+ This code is in the public domain.
+ 
+ */
+#include <SPI.h>
+#include <WiFi.h>
+
+#define APIKEY         "YOUR API KEY GOES HERE" // replace your pachube api key here
+#define FEEDID         00000                    // replace your feed ID
+#define USERAGENT      "My Arduino Project"     // user agent is the project name
+
+char ssid[] = "yourNetwork";      //  your network SSID (name) 
+char pass[] = "secretPassword";   // your network password
+
+int status = WL_IDLE_STATUS;
+
+// initialize the library instance:
+WiFiClient client;
+// if you don't want to use DNS (and reduce your sketch size)
+// use the numeric IP instead of the name for the server:
+IPAddress server(216,52,233,121);      // numeric IP for api.pachube.com
+//char server[] = "api.pachube.com";   // name address for pachube API
+
+unsigned long lastConnectionTime = 0;          // last time you connected to the server, in milliseconds
+boolean lastConnected = false;                 // state of the connection last time through the main loop
+const unsigned long postingInterval = 10*1000; //delay between updates to pachube.com
+
+void setup() {
+  //Initialize serial and wait for port to open:
+  Serial.begin(9600); 
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+  
+  // check for the presence of the shield:
+  if (WiFi.status() == WL_NO_SHIELD) {
+    Serial.println("WiFi shield not present"); 
+    // don't continue:
+    while(true);
+  } 
+  
+  // attempt to connect to Wifi network:
+  while ( status != WL_CONNECTED) { 
+    Serial.print("Attempting to connect to SSID: ");
+    Serial.println(ssid);
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
+    status = WiFi.begin(ssid, pass);
+
+    // wait 10 seconds for connection:
+    delay(10000);
+  } 
+  // you're connected now, so print out the status:
+  printWifiStatus();
+}
+
+
+void loop() {
+  // read the analog sensor:
+  int sensorReading = analogRead(A0);   
+
+  // if there's incoming data from the net connection.
+  // send it out the serial port.  This is for debugging
+  // purposes only:
+  while (client.available()) {
+    char c = client.read();
+    Serial.print(c);
+  }
+
+  // if there's no net connection, but there was one last time
+  // through the loop, then stop the client:
+  if (!client.connected() && lastConnected) {
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+  }
+
+  // if you're not connected, and ten seconds have passed since
+  // your last connection, then connect again and send data:
+  if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
+    sendData(sensorReading);
+  }
+  // store the state of the connection for next time through
+  // the loop:
+  lastConnected = client.connected();
+}
+
+// this method makes a HTTP connection to the server:
+void sendData(int thisData) {
+  // if there's a successful connection:
+  if (client.connect(server, 80)) {
+    Serial.println("connecting...");
+    // send the HTTP PUT request:
+    client.print("PUT /v2/feeds/");
+    client.print(FEEDID);
+    client.println(".csv HTTP/1.1");
+    client.println("Host: api.pachube.com");
+    client.print("X-ApiKey: ");
+    client.println(APIKEY);
+    client.print("User-Agent: ");
+    client.println(USERAGENT);
+    client.print("Content-Length: ");
+
+    // calculate the length of the sensor reading in bytes:
+    // 8 bytes for "sensor1," + number of digits of the data:
+    int thisLength = 8 + getLength(thisData);
+    client.println(thisLength);
+
+    // last pieces of the HTTP PUT request:
+    client.println("Content-Type: text/csv");
+    client.println("Connection: close");
+    client.println();
+
+    // here's the actual content of the PUT request:
+    client.print("sensor1,");
+    client.println(thisData);
+  
+  } 
+  else {
+    // if you couldn't make a connection:
+    Serial.println("connection failed");
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+  }
+   // note the time that the connection was made or attempted:
+  lastConnectionTime = millis();
+}
+
+
+// This method calculates the number of digits in the
+// sensor reading.  Since each digit of the ASCII decimal
+// representation is a byte, the number of digits equals
+// the number of bytes:
+
+int getLength(int someValue) {
+  // there's at least one byte:
+  int digits = 1;
+  // continually divide the value by ten, 
+  // adding one to the digit count for each
+  // time you divide, until you're at 0:
+  int dividend = someValue /10;
+  while (dividend > 0) {
+    dividend = dividend /10;
+    digits++;
+  }
+  // return the number of digits:
+  return digits;
+}
+
+void printWifiStatus() {
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print your WiFi shield's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal strength (RSSI):");
+  Serial.print(rssi);
+  Serial.println(" dBm");
+}
+
+
+