Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 129 deletions

diff --git a/libraries/WiFi/examples/SimpleWebServerWiFi/SimpleWebServerWiFi.ino b/libraries/WiFi/examples/SimpleWebServerWiFi/SimpleWebServerWiFi.ino
deleted file mode 100644
index cdb4e62..0000000
--- a/libraries/WiFi/examples/SimpleWebServerWiFi/SimpleWebServerWiFi.ino
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
-  WiFi Web Server LED Blink
- 
- A simple web server that lets you blink an LED via the web.
- This sketch will print the IP address of your WiFi Shield (once connected)
- to the Serial monitor. From there, you can open that address in a web browser
- to turn on and off the LED on pin 9.
- 
- If the IP address of your shield is yourAddress:
- http://yourAddress/H turns the LED on
- http://yourAddress/L turns it off
- 
- This example is written for a network using WPA encryption. For 
- WEP or WPA, change the Wifi.begin() call accordingly.
- 
- Circuit:
- * WiFi shield attached
- * LED attached to pin 9
- 
- created 25 Nov 2012
- by Tom Igoe
- */
-#include <SPI.h>
-#include <WiFi.h>
-
-char ssid[] = "yourNetwork";      //  your network SSID (name) 
-char pass[] = "secretPassword";   // your network password
-int keyIndex = 0;                 // your network key Index number (needed only for WEP)
-
-int status = WL_IDLE_STATUS;
-WiFiServer server(80);
-
-void setup() {
-  Serial.begin(9600);      // initialize serial communication
-  pinMode(9, OUTPUT);      // set the LED pin mode
-
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    while(true);        // don't continue
-  } 
-
-  // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to Network named: ");
-    Serial.println(ssid);                   // print the network name (SSID);
-
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
-    status = WiFi.begin(ssid, pass);
-    // wait 10 seconds for connection:
-    delay(10000);
-  } 
-  server.begin();                           // start the web server on port 80
-  printWifiStatus();                        // you're connected now, so print out the status
-}
-
-
-void loop() {
-  WiFiClient client = server.available();   // listen for incoming clients
-
-  if (client) {                             // if you get a client,
-    Serial.println("new client");           // print a message out the serial port
-    String currentLine = "";                // make a String to hold incoming data from the client
-    while (client.connected()) {            // loop while the client's connected
-      if (client.available()) {             // if there's bytes to read from the client,
-        char c = client.read();             // read a byte, then
-        Serial.write(c);                    // print it out the serial monitor
-        if (c == '\n') {                    // if the byte is a newline character
-
-          // if the current line is blank, you got two newline characters in a row.
-          // that's the end of the client HTTP request, so send a response:
-          if (currentLine.length() == 0) {  
-            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
-            // and a content-type so the client knows what's coming, then a blank line:    
-            client.println("HTTP/1.1 200 OK");
-            client.println("Content-type:text/html");
-            client.println();
-
-            // the content of the HTTP response follows the header:
-            client.print("Click <a href=\"/H\">here</a> turn the LED on pin 9 on<br>");
-            client.print("Click <a href=\"/L\">here</a> turn the LED on pin 9 off<br>");
-
-            // The HTTP response ends with another blank line:
-            client.println();
-            // break out of the while loop:
-            break;         
-          } 
-          else {      // if you got a newline, then clear currentLine:
-            currentLine = "";
-          }
-        }     
-        else if (c != '\r') {    // if you got anything else but a carriage return character,
-          currentLine += c;      // add it to the end of the currentLine
-        }
-
-        // Check to see if the client request was "GET /H" or "GET /L":
-        if (currentLine.endsWith("GET /H")) {
-          digitalWrite(9, HIGH);               // GET /H turns the LED on
-        }
-        if (currentLine.endsWith("GET /L")) {
-          digitalWrite(9, LOW);                // GET /L turns the LED off
-        }
-      }
-    }
-    // close the connection:
-    client.stop();
-    Serial.println("client disonnected");
-  }
-}
-
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-  // print where to go in a browser:
-  Serial.print("To see this page in action, open a browser to http://");
-  Serial.println(ip);
-}