Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 121 deletions

diff --git a/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino b/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino
deleted file mode 100644
index f42a7f3..0000000
--- a/libraries/WiFi/examples/ConnectNoEncryption/ConnectNoEncryption.ino
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- 
- This example connects to an unencrypted Wifi network. 
- Then it prints the  MAC address of the Wifi shield,
- the IP address obtained, and other network details.
-
- Circuit:
- * WiFi shield attached
- 
- created 13 July 2010
- by dlf (Metodo2 srl)
- modified 31 May 2012
- by Tom Igoe
- */
- #include <WiFi.h>
-
-char ssid[] = "yourNetwork";     // the name of your network
-int status = WL_IDLE_STATUS;     // the Wifi radio's status
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-  
- // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to open SSID: ");
-    Serial.println(ssid);
-    status = WiFi.begin(ssid);
-
-    // wait 10 seconds for connection:
-    delay(10000);
-  }
-   
-  // you're connected now, so print out the data:
-  Serial.print("You're connected to the network");
-  printCurrentNet();
-  printWifiData();
-}
-
-void loop() {
-  // check the network connection once every 10 seconds:
-  delay(10000);
-  printCurrentNet();
-}
-
-void printWifiData() {
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-    Serial.print("IP Address: ");
-  Serial.println(ip);
-  Serial.println(ip);
-  
-  // print your MAC address:
-  byte mac[6];  
-  WiFi.macAddress(mac);
-  Serial.print("MAC address: ");
-  Serial.print(mac[5],HEX);
-  Serial.print(":");
-  Serial.print(mac[4],HEX);
-  Serial.print(":");
-  Serial.print(mac[3],HEX);
-  Serial.print(":");
-  Serial.print(mac[2],HEX);
-  Serial.print(":");
-  Serial.print(mac[1],HEX);
-  Serial.print(":");
-  Serial.println(mac[0],HEX);
-  
-  // print your subnet mask:
-  IPAddress subnet = WiFi.subnetMask();
-  Serial.print("NetMask: ");
-  Serial.println(subnet);
-
-  // print your gateway address:
-  IPAddress gateway = WiFi.gatewayIP();
-  Serial.print("Gateway: ");
-  Serial.println(gateway);
-}
-
-void printCurrentNet() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print the MAC address of the router you're attached to:
-  byte bssid[6];
-  WiFi.BSSID(bssid);    
-  Serial.print("BSSID: ");
-  Serial.print(bssid[5],HEX);
-  Serial.print(":");
-  Serial.print(bssid[4],HEX);
-  Serial.print(":");
-  Serial.print(bssid[3],HEX);
-  Serial.print(":");
-  Serial.print(bssid[2],HEX);
-  Serial.print(":");
-  Serial.print(bssid[1],HEX);
-  Serial.print(":");
-  Serial.println(bssid[0],HEX);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.println(rssi);
-
-  // print the encryption type:
-  byte encryption = WiFi.encryptionType();
-  Serial.print("Encryption Type:");
-  Serial.println(encryption,HEX);
-}
-