Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

15 files changed, 0 insertions, 1086 deletions

diff --git a/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino b/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino
deleted file mode 100644
index da7a94d..0000000
--- a/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-
- Arduino TFT Bitmap Logo example
- 
- This example reads an image file from a micro-SD card
- and draws it on the screen, at random locations.
- 
- In this sketch, the Arduino logo is read from a micro-SD card.
- There is a .bmp file included with this sketch. 
- - open the sketch folder (Ctrl-K or Cmd-K)
- - copy the "arduino.bmp" file to a micro-SD
- - put the SD into the SD slot of the Arduino TFT module.
- 
- This example code is in the public domain.
- 
- Created 19 April 2013 by Enrico Gueli
- 
- http://arduino.cc/en/Tutorial/TFTBitmapLogo
- 
- */
- 
-// include the necessary libraries
-#include <SPI.h>
-#include <SD.h>
-#include <TFT.h>  // Arduino LCD library
-
-// pin definition for the Uno
-#define sd_cs  4
-#define lcd_cs 10
-#define dc     9
-#define rst    8  
-
-// pin definition for the Leonardo
-//#define sd_cs  8
-//#define lcd_cs 7
-//#define dc     0
-//#define rst    1  
-
-TFT TFTscreen = TFT(lcd_cs, dc, rst);
-
-// this variable represents the image to be drawn on screen
-PImage logo;
-
-
-void setup() {
-  // initialize the GLCD and show a message
-  // asking the user to open the serial line
-  TFTscreen.begin();
-  TFTscreen.background(255, 255, 255);
-
-  TFTscreen.stroke(0, 0, 255);
-  TFTscreen.println();
-  TFTscreen.println("Arduino TFT Bitmap Example");
-  TFTscreen.stroke(0, 0, 0);
-  TFTscreen.println("Open serial monitor");
-  TFTscreen.println("to run the sketch");
-
-  // initialize the serial port: it will be used to 
-  // print some diagnostic info  
-  Serial.begin(9600);
-  while (!Serial) {
-    // wait for serial line to be ready
-  }
-
-  // clear the GLCD screen before starting
-  TFTscreen.background(255, 255, 255);
-  
-  // try to access the SD card. If that fails (e.g.
-  // no card present), the setup process will stop.
-  Serial.print("Initializing SD card...");
-  if (!SD.begin(sd_cs)) {
-    Serial.println("failed!");
-    return;
-  }
-  Serial.println("OK!");
-  
-  // initialize and clear the GLCD screen
-  TFTscreen.begin();
-  TFTscreen.background(255, 255, 255);
-
-  // now that the SD card can be access, try to load the
-  // image file.
-  logo = TFTscreen.loadImage("arduino.bmp");
-  if (!logo.isValid()) {
-    Serial.println("error while loading arduino.bmp");
-  }
-}
-
-void loop() {
-  // don't do anything if the image wasn't loaded correctly.
-  if (logo.isValid() == false) {
-    return;
-  }
-  
-  Serial.println("drawing image");
-
-  // get a random location where to draw the image.
-  // To avoid the image to be draw outside the screen,
-  // take into account the image size.
-  int x = random(TFTscreen.width() - logo.width());
-  int y = random(TFTscreen.height() - logo.height());
-
-  // draw the image to the screen
-  TFTscreen.image(logo, x, y);
-
-  // wait a little bit before drawing again
-  delay(1500);
-}
diff --git a/libraries/TFT/examples/Arduino/TFTBitmapLogo/arduino.bmp b/libraries/TFT/examples/Arduino/TFTBitmapLogo/arduino.bmp
deleted file mode 100644
index 09c670a..0000000
--- a/libraries/TFT/examples/Arduino/TFTBitmapLogo/arduino.bmp
+++ /dev/null
diff --git a/libraries/TFT/examples/Arduino/TFTColorPicker/TFTColorPicker.ino b/libraries/TFT/examples/Arduino/TFTColorPicker/TFTColorPicker.ino
deleted file mode 100644
index 74fc176..0000000
--- a/libraries/TFT/examples/Arduino/TFTColorPicker/TFTColorPicker.ino
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-
- TFT Color Picker
- 
- This example for the Arduino screen reads the input of 
- potentiometers or analog sensors attached to A0, A1,
- and A2 and uses the values to change the screen's color.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/TFTColorPicker
- 
- */
- 
-// pin definition for the Uno
-#define cs   10
-#define dc   9
-#define rst  8  
-
-// pin definition for the Leonardo
-// #define cs   7
-// #define dc   0
-// #define rst  1 
-
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-TFT TFTscreen = TFT(cs, dc, rst);
-
-void setup() {
-  // begin serial communication
-  Serial.begin(9600);
-
-  // initialize the display
-  TFTscreen.begin();
-
-  // set the background to white
-  TFTscreen.background(255, 255, 255);
-
-}
-
-void loop() {
-
-  // read the values from your sensors and scale them to 0-255
-  int redVal = map(analogRead(A0), 0, 1023, 0, 255); 
-  int greenVal = map(analogRead(A1), 0, 1023, 0, 255); 
-  int blueVal = map(analogRead(A2), 0, 1023, 0, 255);
-  
-  // draw the background based on the mapped values
-  TFTscreen.background(redVal, greenVal, blueVal);
-  
-  // send the values to the serial monitor
-  Serial.print("background(");
-  Serial.print(redVal);
-  Serial.print(" , ");
-  Serial.print(greenVal);
-  Serial.print(" , ");
-  Serial.print(blueVal);
-  Serial.println(")");
-  
-  // wait for a moment
-  delay(33);
-
-}
-
diff --git a/libraries/TFT/examples/Arduino/TFTDisplayText/TFTDisplayText.ino b/libraries/TFT/examples/Arduino/TFTDisplayText/TFTDisplayText.ino
deleted file mode 100644
index f482bd1..0000000
--- a/libraries/TFT/examples/Arduino/TFTDisplayText/TFTDisplayText.ino
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
-  Arduino TFT text example
-  
-  This example demonstrates how to draw text on the 
-  TFT with an Arduino. The Arduino reads the value 
-  of an analog sensor attached to pin A0, and writes 
-  the value to the LCD screen, updating every
-  quarter second.
-  
-  This example code is in the public domain
-
-  Created 15 April 2013 by Scott Fitzgerald
- 
-  http://arduino.cc/en/Tutorial/TFTDisplayText
- 
- */
-
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-// pin definition for the Uno
-#define cs   10
-#define dc   9
-#define rst  8  
-
-// pin definition for the Leonardo
-// #define cs   7
-// #define dc   0
-// #define rst  1 
-
-// create an instance of the library
-TFT TFTscreen = TFT(cs, dc, rst);
-
-// char array to print to the screen
-char sensorPrintout[4];
-
-void setup() {
-  
-  // Put this line at the beginning of every sketch that uses the GLCD:
-  TFTscreen.begin();
-
-  // clear the screen with a black background
-  TFTscreen.background(0, 0, 0);
-  
-  // write the static text to the screen
-  // set the font color to white
-  TFTscreen.stroke(255,255,255);
-  // set the font size
-  TFTscreen.setTextSize(2);
-  // write the text to the top left corner of the screen
-  TFTscreen.text("Sensor Value :\n ",0,0);
-  // ste the font size very large for the loop
-  TFTscreen.setTextSize(5);
-}
-
-void loop() {
-
-  // Read the value of the sensor on A0
-  String sensorVal = String(analogRead(A0));
- 
-  // convert the reading to a char array
-  sensorVal.toCharArray(sensorPrintout, 4);
-
-  // set the font color
-  TFTscreen.stroke(255,255,255);
-  // print the sensor value
-  TFTscreen.text(sensorPrintout, 0, 20);
-  // wait for a moment
-  delay(250);
-  // erase the text you just wrote
-  TFTscreen.stroke(0,0,0);
-  TFTscreen.text(sensorPrintout, 0, 20);
-}
-
diff --git a/libraries/TFT/examples/Arduino/TFTEtchASketch/TFTEtchASketch.ino b/libraries/TFT/examples/Arduino/TFTEtchASketch/TFTEtchASketch.ino
deleted file mode 100644
index 29e3483..0000000
--- a/libraries/TFT/examples/Arduino/TFTEtchASketch/TFTEtchASketch.ino
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-
- TFT EtchASketch
- 
- This example for the Arduino screen draws a white point
- on the GLCD based on the values of 2 potentiometers. 
- To clear the screen, press a button attached to pin 2.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/TFTEtchASketch
- 
- */
- 
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-// pin definition for the Uno
-#define cs   10
-#define dc   9
-#define rst  8  
-
-// pin definition for the Leonardo
-// #define cs   7
-// #define dc   0
-// #define rst  1 
-
-TFT TFTscreen = TFT(cs, dc, rst);
-
-// initial position of the cursor
-int xPos = TFTscreen.width()/2;
-int yPos = TFTscreen.height()/2;
-
-// pin the erase switch is connected to
-int erasePin = 2;
-
-void setup() {
-  // declare inputs
-  pinMode(erasePin, INPUT);
-  // initialize the screen
-  TFTscreen.begin();
-  // make the background black
-  TFTscreen.background(0,0,0); 
-}
-
-void loop()
-{
-  // read the potentiometers on A0 and A1 
-  int xValue = analogRead(A0);
-  int yValue = analogRead(A1);
-
-  // map the values and update the position
-  xPos = xPos + (map(xValue, 0, 1023, 2, -2));
-  yPos = yPos + (map(yValue, 0, 1023, -2, 2));
-  
-// don't let the point go past the screen edges
-  if(xPos > 159){
-    (xPos = 159);
-  }
-
-  if(xPos < 0){
-    (xPos = 0);
-  }
-  if(yPos > 127){
-    (yPos = 127);
-  }
-
-  if(yPos < 0){
-    (yPos = 0);
-  }
-  
-  // draw the point
-  TFTscreen.stroke(255,255,255);
-  TFTscreen.point(xPos,yPos);
-
-  // read the value of the pin, and erase the screen if pressed
-  if(digitalRead(erasePin) == HIGH){
-    TFTscreen.background(0,0,0);
-  }
-
-  delay(33);            
-}
diff --git a/libraries/TFT/examples/Arduino/TFTGraph/TFTGraph.ino b/libraries/TFT/examples/Arduino/TFTGraph/TFTGraph.ino
deleted file mode 100644
index 39ae49b..0000000
--- a/libraries/TFT/examples/Arduino/TFTGraph/TFTGraph.ino
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
-
- TFT Graph
- 
- This example for an Arduino screen reads 
- the value of an analog sensor on A0, and 
- graphs the values on the screen.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/TFTGraph
- 
- */
-
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
- 
- // pin definition for the Uno
-#define cs   10
-#define dc   9
-#define rst  8  
-
-// pin definition for the Leonardo
-// #define cs   7
-// #define dc   0
-// #define rst  1 
-
-TFT TFTscreen = TFT(cs, dc, rst);
-
-// position of the line on screen
-int xPos = 0;
-
-void setup(){
-  // initialize the serial port
-  Serial.begin(9600);
-
-  // initialize the display
-  TFTscreen.begin();
-
-  // clear the screen with a pretty color
-  TFTscreen.background(250,16,200); 
-}
-
-void loop(){
-  // read the sensor and map it to the screen height
-  int sensor = analogRead(A0);
-  int drawHeight = map(sensor,0,1023,0,TFTscreen.height());
-  
-  // print out the height to the serial monitor
-  Serial.println(drawHeight);
-  
-  // draw a line in a nice color
-  TFTscreen.stroke(250,180,10);
-  TFTscreen.line(xPos, TFTscreen.height()-drawHeight, xPos, TFTscreen.height());
-
-  // if the graph has reached the screen edge
-  // erase the screen and start again
-  if (xPos >= 160) {
-    xPos = 0;
-    TFTscreen.background(250,16,200); 
-  } 
-  else {
-    // increment the horizontal position:
-    xPos++;
-  }
-
-  delay(16);
-}
-
diff --git a/libraries/TFT/examples/Arduino/TFTPong/TFTPong.ino b/libraries/TFT/examples/Arduino/TFTPong/TFTPong.ino
deleted file mode 100644
index 02ea11c..0000000
--- a/libraries/TFT/examples/Arduino/TFTPong/TFTPong.ino
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
-
- TFT Pong
- 
- This example for the Arduino screen reads the values 
- of 2 potentiometers to move a rectangular platform
- on the x and y axes. The platform can intersect 
- with a ball causing it to bounce. 
- 
- This example code is in the public domain.
- 
- Created by Tom Igoe December 2012
- Modified 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/TFTPong
- 
- */
-
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-// pin definition for the Uno
-#define cs   10
-#define dc   9
-#define rst  8  
-
-// pin definition for the Leonardo
-// #define cs   7
-// #define dc   0
-// #define rst  1 
-
-TFT TFTscreen = TFT(cs, dc, rst);
-
-// variables for the position of the ball and paddle
-int paddleX = 0;
-int paddleY = 0;
-int oldPaddleX, oldPaddleY;
-int ballDirectionX = 1;
-int ballDirectionY = 1;
-
-int ballSpeed = 10; // lower numbers are faster
-
-int ballX, ballY, oldBallX, oldBallY;
-
-void setup() {
-  // initialize the display
-  TFTscreen.begin();
-  // black background
-  TFTscreen.background(0,0,0); 
-}
-
-void loop() {
-
-  // save the width and height of the screen
-  int myWidth = TFTscreen.width();
-  int myHeight = TFTscreen.height();
-  
-  // map the paddle's location to the position of the potentiometers   
-  paddleX = map(analogRead(A0), 512, -512, 0, myWidth) - 20/2; 
-  paddleY = map(analogRead(A1), 512, -512, 0, myHeight) - 5/2; 
-  
-  // set the fill color to black and erase the previous 
-  // position of the paddle if different from present
-  TFTscreen.fill(0,0,0);
-
- if (oldPaddleX != paddleX || oldPaddleY != paddleY) {
-    TFTscreen.rect(oldPaddleX, oldPaddleY, 20, 5);
-  }
-
-  // draw the paddle on screen, save the current position
-  // as the previous.
-  TFTscreen.fill(255,255,255);
-
-  TFTscreen.rect(paddleX, paddleY, 20, 5);
-  oldPaddleX = paddleX;
-  oldPaddleY = paddleY;
-
-  // update the ball's position and draw it on screen
-  if (millis() % ballSpeed < 2) {
-  moveBall();
-  }
-}
-
-// this function determines the ball's position on screen
-void moveBall() {
-  // if the ball goes offscreen, reverse the direction:
- if (ballX > TFTscreen.width() || ballX < 0) {
-   ballDirectionX = -ballDirectionX;
- }
- 
-  if (ballY > TFTscreen.height() || ballY < 0) {
-   ballDirectionY = -ballDirectionY;
- }  
- 
-  // check if the ball and the paddle occupy the same space on screen
-  if (inPaddle(ballX, ballY, paddleX, paddleY, 20, 5)) {
-    ballDirectionX = -ballDirectionX;
-    ballDirectionY = -ballDirectionY;
- }
- 
- // update the ball's position
- ballX += ballDirectionX;
- ballY += ballDirectionY;
- 
-// erase the ball's previous position
- TFTscreen.fill(0,0,0);
- 
-  if (oldBallX != ballX || oldBallY != ballY) {
-    TFTscreen.rect(oldBallX, oldBallY, 5, 5);
-  }
-  
-  
-  // draw the ball's current position
-  TFTscreen.fill(255,255,255);
-  TFTscreen.rect(ballX, ballY, 5, 5);
- 
-  oldBallX = ballX;
-  oldBallY = ballY;
-  
-}
-
-// this function checks the position of the ball
-// to see if it intersects with the paddle
-boolean inPaddle(int x, int y, int rectX, int rectY, int rectWidth, int rectHeight) {
-  boolean result = false;
-   
-  if ((x >= rectX && x <= (rectX + rectWidth)) && 
-      (y >= rectY && y <= (rectY + rectHeight))) {
-       result = true; 
-      }
- 
-return result;  
-}
-
-
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino
deleted file mode 100644
index 3d3f230..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-
- Esplora TFT Bitmap Logos
- 
- This example for the Arduino TFT screen is for use
- with an Arduino Esplora.
- 
- This example reads an image file from a micro-SD card
- and draws it on the screen, at random locations.
- 
- There is a .bmp file included with this sketch. 
- - open the sketch folder (Ctrl-K or Cmd-K)
- - copy the "arduino.bmp" file to a micro-SD
- - put the SD into the SD slot of the Arduino LCD module.
- 
- This example code is in the public domain.
- 
- Created 19 April 2013 by Enrico Gueli
- 
- http://arduino.cc/en/Tutorial/EsploraTFTBitmapLogo
- 
- */
- 
-// include the necessary libraries
-#include <Esplora.h>
-#include <SPI.h>
-#include <SD.h>
-#include <TFT.h>            // Arduino LCD library
-
-// the Esplora pin connected to the chip select line for SD card
-#define SD_CS    8
-
-// this variable represents the image to be drawn on screen
-PImage logo;
-
-void setup() {
-  // initialize the GLCD and show a message
-  // asking the user to open the serial line
-  EsploraTFT.begin();
-  EsploraTFT.background(255, 255, 255);
-
-  EsploraTFT.stroke(0, 0, 255);
-  EsploraTFT.println();
-  EsploraTFT.println("Arduino LCD Bitmap Example");
-  EsploraTFT.stroke(0, 0, 0);
-  EsploraTFT.println("Open serial monitor");
-  EsploraTFT.println("to run the sketch");
-
-  // initialize the serial port: it will be used to 
-  // print some diagnostic info
-  Serial.begin(9600);
-  while (!Serial) {
-    // wait for serial monitor to be open
-  }
-  
-  // try to access the SD card. If that fails (e.g.
-  // no card present), the Esplora's LED will turn red.
-  Serial.print("Initializing SD card...");
-  if (!SD.begin(SD_CS)) {
-    Serial.println("failed!");
-    Esplora.writeRed(255);
-    return;
-  }
-  Serial.println("OK!");
-  
-  // clear the GLCD screen before starting
-  EsploraTFT.background(255, 255, 255);
-  
-  // now that the SD card can be access, try to load the
-  // image file. The Esplora LED will turn green or red if
-  // the loading went OK or not.
-  Esplora.writeRGB(0, 0, 0);
-  logo = EsploraTFT.loadImage("arduino.bmp");
-  if (logo.isValid()) {
-    Esplora.writeGreen(255);
-  }
-  else
-    Esplora.writeRed(255);
-
-}
-
-void loop() {
-  // don't do anything if the image wasn't loaded correctly.
-  if (logo.isValid() == false) {
-    return;
-  }
-  
-  Serial.println("drawing image");
-  
-  // get a random location where to draw the image.
-  // To avoid the image to be draw outside the screen,
-  // take into account the image size.
-  int x = random(EsploraTFT.width() - logo.width());
-  int y = random(EsploraTFT.height() - logo.height());
-  
-  // draw the image to the screen
-  EsploraTFT.image(logo, x, y);
-  
-  // wait a little bit before drawing again
-  delay(1500);
-}
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp
deleted file mode 100644
index 09c670a..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp
+++ /dev/null
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTColorPicker/EsploraTFTColorPicker.ino b/libraries/TFT/examples/Esplora/EsploraTFTColorPicker/EsploraTFTColorPicker.ino
deleted file mode 100644
index 63a0ee2..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTColorPicker/EsploraTFTColorPicker.ino
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-
- Esplora TFT Color Picker
- 
- This example for the Esplora with an Arduino TFT reads 
- the input of the joystick and slider, using the values
- to change the screen's color.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/TFTColorPicker
- 
- */
-
-#include <Esplora.h>
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-void setup() {
-  Serial.begin(9600);
-
-  // initialize the LCD
-  EsploraTFT.begin();
-
-  // start out with a white screen
-  EsploraTFT.background(255, 255, 255);
-
-}
-
-void loop() {
-
-  // map the values from sensors
-  int xValue = map(Esplora.readJoystickX(), -512, 512, 0, 255);  // read the joystick's X position
-  int yValue = map(Esplora.readJoystickY(), -512, 512, 0, 255);  // read the joystick's Y position
-  int slider = map(Esplora.readSlider(), 0, 1023, 0, 255);   // read the slider's position
-  
-  // change the background color based on the mapped values
-  EsploraTFT.background(xValue, yValue, slider);
-  
-  // print the mapped values to the Serial monitor
-  Serial.print("background(");
-  Serial.print(xValue);
-  Serial.print(" , ");
-  Serial.print(yValue);
-  Serial.print(" , ");
-  Serial.print(slider);
-  Serial.println(")");
-  
-  delay(33);
-
-}
-
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTEtchASketch/EsploraTFTEtchASketch.ino b/libraries/TFT/examples/Esplora/EsploraTFTEtchASketch/EsploraTFTEtchASketch.ino
deleted file mode 100644
index a1430d3..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTEtchASketch/EsploraTFTEtchASketch.ino
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-
- Esplora TFT EtchASketch
- 
- This example for the Arduino TFT and Esplora draws 
- a white line on the screen, based on the position 
- of the joystick. To clear the screen, shake the 
- Esplora, using the values from the accelerometer.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/EsploraTFTEtchASketch
- 
- */
- 
-#include <Esplora.h>
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-// initial position of the cursor
-int xPos = EsploraTFT.width()/2;
-int yPos = EsploraTFT.height()/2;
-
-void setup() {
-  // initialize the display
-  EsploraTFT.begin();
-  
-  // clear the background
-  EsploraTFT.background(0,0,0); 
-}
-
-void loop()
-{
-
-  int xAxis = Esplora.readJoystickX();    // read the X axis
-  int yAxis = Esplora.readJoystickY();    // read the Y axis
-
-  // update the position of the line
-  // depending on the position of the joystick
-  if (xAxis<10 && xAxis>-10){
-    xPos=xPos;
-  }
-  else{
-    xPos = xPos + (map(xAxis, -512, 512, 2, -2));
-  }
-  if (yAxis<10 && yAxis>-10){
-    yAxis=yAxis;
-  }
-  else{
-    yPos = yPos + (map(yAxis, -512, 512, -2, 2));
-  }
-
-// don't let the point go past the screen edges
-  if(xPos > 159){
-    (xPos = 159);
-  }
-
-  if(xPos < 0){
-    (xPos = 0);
-  }
-  if(yPos > 127){
-    (yPos = 127);
-  }
-
-  if(yPos < 0){
-    (yPos = 0);
-  }
-  
-  // draw the point
-  EsploraTFT.stroke(255,255,255);
-  EsploraTFT.point(xPos,yPos);
-
-  // check the accelerometer values and clear
-  // the screen if it is being shaken 
-  if(abs(Esplora.readAccelerometer(X_AXIS))>200 || abs(Esplora.readAccelerometer(Y_AXIS))>200){
-    EsploraTFT.background(0,0,0);
-  }
-  
-  delay(33);            
-}
-
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTGraph/EsploraTFTGraph.ino b/libraries/TFT/examples/Esplora/EsploraTFTGraph/EsploraTFTGraph.ino
deleted file mode 100644
index 7f2a427..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTGraph/EsploraTFTGraph.ino
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-
- Esplora TFT Graph
- 
- This example for the Esplora with an Arduino TFT reads 
- the value of the light sensor, and graphs the values on
- the screen.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/EsploraTFTGraph
- 
- */
-
-#include <Esplora.h>
-#include <TFT.h>  // Arduino LCD library
-#include <SPI.h>
-
-// position of the line on screen
-int xPos = 0;
-
-void setup(){
-
-  // initialize the screen
-  EsploraTFT.begin();
-
-  // clear the screen with a nice color
-  EsploraTFT.background(250,16,200); 
-}
-
-void loop(){
-
-  // read the sensor value
-  int sensor = Esplora.readLightSensor();
-  // map the sensor value to the height of the screen
-  int graphHeight = map(sensor,0,1023,0,EsploraTFT.height());
-
-  // draw the line in a pretty color
-  EsploraTFT.stroke(250,180,10);
-  EsploraTFT.line(xPos, EsploraTFT.height() - graphHeight, xPos, EsploraTFT.height());
-
-  // if the graph reaches the edge of the screen
-  // erase it and start over from the other side
-  if (xPos >= 160) {
-    xPos = 0;
-    EsploraTFT.background(250,16,200); 
-  } 
-  else {
-    // increment the horizontal position:
-    xPos++;
-  }
-
-  delay(16);
-}
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTHorizon/EsploraTFTHorizon.ino b/libraries/TFT/examples/Esplora/EsploraTFTHorizon/EsploraTFTHorizon.ino
deleted file mode 100644
index a7945c9..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTHorizon/EsploraTFTHorizon.ino
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-
- Esplora TFT Horizon
- 
- This example for the Arduino TFT and Esplora draws 
- a line on the screen that stays level with the ground
- as you tile the Esplora side to side
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/EsploraTFTHorizon
- 
- */
-
-#include <Esplora.h>
-#include <TFT.h>            // Arduino LCD library
-#include <SPI.h>
-
-// horizontal start and end positions
-int yStart = EsploraTFT.height()/2;
-int yEnd = EsploraTFT.height()/2;
-
-// previous start and end positions
-int oldEndY;
-int oldStartY;
-
-void setup() {
-  // initialize the display
-  EsploraTFT.begin();
-  // make the background black
-  EsploraTFT.background(0,0,0); 
-}
-
-void loop()
-{
-  // read the x-axis of te accelerometer
-  int tilt = Esplora.readAccelerometer(X_AXIS);
-
-  // the values are 100 when tilted to the left
-  // and  -100 when tilted to the right
-  // map these values to the start and end points
-  yStart = map(tilt,-100,100,EsploraTFT.height(),0);
-  yEnd = map(tilt,-100,100,0,EsploraTFT.height());
-
-  // if the previous values are different than the current values
-  // erase the previous line
-  if (oldStartY != yStart || oldEndY != yEnd) {
-    EsploraTFT.stroke(0,0,0);
-    EsploraTFT.line(0, oldStartY, EsploraTFT.width(), oldEndY);
-  }
-
-  // draw the line in magenta
-  EsploraTFT.stroke(255,0,255);
-  EsploraTFT.line(0,yStart,EsploraTFT.width(),yEnd);
-
-  // save the current start and end points
-  // to compare int he next loop
-  oldStartY= yStart;
-  oldEndY = yEnd;
-  delay(10);            
-}
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTPong/EsploraTFTPong.ino b/libraries/TFT/examples/Esplora/EsploraTFTPong/EsploraTFTPong.ino
deleted file mode 100644
index e3422d4..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTPong/EsploraTFTPong.ino
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-
- Esplora TFT Pong
- 
- This example for the Esplora with an Arduino TFT screen reads 
- the value of the joystick to move a rectangular platform
- on the x and y axes. The platform can intersect with a ball
- causing it to bounce. The Esplora's slider adjusts the speed
- of the ball.
- 
- This example code is in the public domain.
- 
- Created by Tom Igoe December 2012
- Modified 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/EsploraTFTPong
- 
- */
-
-#include <Esplora.h>
-#include <TFT.h>            // Arduino LCD library
-#include <SPI.h>
-
-// variables for the position of the ball and paddle
-int paddleX = 0;
-int paddleY = 0;
-int oldPaddleX, oldPaddleY;
-int ballDirectionX = 1;
-int ballDirectionY = 1;
-
-int ballX, ballY, oldBallX, oldBallY;
-
-void setup() {
-
-  Serial.begin(9600);
-
-  // initialize the display
-  EsploraTFT.begin();
-  // set the background the black
-  EsploraTFT.background(0,0,0); 
-}
-
-void loop() {
-  // save the width and height of the screen
-  int myWidth = EsploraTFT.width();
-  int myHeight = EsploraTFT.height();
-
-  // map the paddle's location to the joystick's position 
-  paddleX = map(Esplora.readJoystickX(), 512, -512, 0, myWidth) - 20/2; 
-  paddleY = map(Esplora.readJoystickY(), -512, 512, 0, myHeight) - 5/2; 
-  Serial.print(paddleX);
-  Serial.print(" ");
-  Serial.println(paddleY);
-
-  // set the fill color to black and erase the previous 
-  // position of the paddle if different from present
-  EsploraTFT.fill(0,0,0);
-
-  if (oldPaddleX != paddleX || oldPaddleY != paddleY) {
-    EsploraTFT.rect(oldPaddleX, oldPaddleY, 20, 5);
-  }
-
-  // draw the paddle on screen, save the current position
-  // as the previous.
-  EsploraTFT.fill(255,255,255);
-  EsploraTFT.rect(paddleX, paddleY, 20, 5);
-  oldPaddleX = paddleX;
-  oldPaddleY = paddleY;
-
-  // read the slider to determinde the speed of the ball
-  int ballSpeed = map(Esplora.readSlider(), 0, 1023, 0, 80)+1;
-  if (millis() % ballSpeed < 2) {
-    moveBall();
-  }
-}
-
-
-// this function determines the ball's position on screen
-void moveBall() {
-  // if the ball goes offscreen, reverse the direction:
-  if (ballX > EsploraTFT.width() || ballX < 0) {
-    ballDirectionX = -ballDirectionX;
-  }
-
-  if (ballY > EsploraTFT.height() || ballY < 0) {
-    ballDirectionY = -ballDirectionY;
-  }  
-
-  // check if the ball and the paddle occupy the same space on screen
-  if (inPaddle(ballX, ballY, paddleX, paddleY, 20, 5)) {
-    ballDirectionY = -ballDirectionY;
-  }
-
-  // update the ball's position
-  ballX += ballDirectionX;
-  ballY += ballDirectionY;
-
-  // erase the ball's previous position
-  EsploraTFT.fill(0,0,0);
-
-  if (oldBallX != ballX || oldBallY != ballY) {
-    EsploraTFT.rect(oldBallX, oldBallY, 5, 5);
-  }
-
-  // draw the ball's current position
-  EsploraTFT.fill(255,255,255);
-
-  EsploraTFT.rect(ballX, ballY, 5, 5);
-
-  oldBallX = ballX;
-  oldBallY = ballY;
-
-}
-
-// this function checks the position of the ball
-// to see if it intersects with the paddle
-boolean inPaddle(int x, int y, int rectX, int rectY, int rectWidth, int rectHeight) {
-  boolean result = false;
-
-  if ((x >= rectX && x <= (rectX + rectWidth)) && 
-    (y >= rectY && y <= (rectY + rectHeight))) {
-    result = true; 
-  }
-
-  return result;  
-}
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTTemp/EsploraTFTTemp.ino b/libraries/TFT/examples/Esplora/EsploraTFTTemp/EsploraTFTTemp.ino
deleted file mode 100644
index b475d2d..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTTemp/EsploraTFTTemp.ino
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-
- Esplora TFT Temperature Display
- 
- This example for the Arduino TFT screen is for use
- with an Arduino Esplora.
- 
- This example reads the temperature of the Esplora's
- on board thermisistor and displays it on an attached
- LCD screen, updating every second.
- 
- This example code is in the public domain.
- 
- Created 15 April 2013 by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/EsploraTFTTemp
- 
- */
-
-// include the necessary libraries
-#include <Esplora.h>  
-#include <TFT.h>            // Arduino LCD library
-#include <SPI.h>
-
-char tempPrintout[3];  // array to hold the temperature data
-
-void setup() {
-
-  // Put this line at the beginning of every sketch that uses the GLCD
-  EsploraTFT.begin();
-
-  // clear the screen with a black background
-  EsploraTFT.background(0,0,0);
-  
-  // set the text color to magenta
-  EsploraTFT.stroke(200,20,180);
-  // set the text to size 2
-  EsploraTFT.setTextSize(2);
-  // start the text at the top left of the screen
-  // this text is going to remain static
-  EsploraTFT.text("Degrees in C :\n ",0,0);
-
-  // set the text in the loop to size 5
-  EsploraTFT.setTextSize(5);
-}
-
-void loop() {
-
-  // read the temperature  in Celcius and store it in a String
-  String temperature = String(Esplora.readTemperature(DEGREES_C));
-
-  // convert the string to a char array
-  temperature.toCharArray(tempPrintout, 3);
-
-  // set the text color to white
-  EsploraTFT.stroke(255,255,255);
-  // print the temperature one line below the static text
-  EsploraTFT.text(tempPrintout, 0, 30);
-  
-  delay(1000);
-  // erase the text for the next loop
-  EsploraTFT.stroke(0,0,0);
-  EsploraTFT.text(tempPrintout, 0, 30);
-}