Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

2 files changed, 0 insertions, 101 deletions

diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino
deleted file mode 100644
index 3d3f230..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-
- Esplora TFT Bitmap Logos
- 
- This example for the Arduino TFT screen is for use
- with an Arduino Esplora.
- 
- This example reads an image file from a micro-SD card
- and draws it on the screen, at random locations.
- 
- There is a .bmp file included with this sketch. 
- - open the sketch folder (Ctrl-K or Cmd-K)
- - copy the "arduino.bmp" file to a micro-SD
- - put the SD into the SD slot of the Arduino LCD module.
- 
- This example code is in the public domain.
- 
- Created 19 April 2013 by Enrico Gueli
- 
- http://arduino.cc/en/Tutorial/EsploraTFTBitmapLogo
- 
- */
- 
-// include the necessary libraries
-#include <Esplora.h>
-#include <SPI.h>
-#include <SD.h>
-#include <TFT.h>            // Arduino LCD library
-
-// the Esplora pin connected to the chip select line for SD card
-#define SD_CS    8
-
-// this variable represents the image to be drawn on screen
-PImage logo;
-
-void setup() {
-  // initialize the GLCD and show a message
-  // asking the user to open the serial line
-  EsploraTFT.begin();
-  EsploraTFT.background(255, 255, 255);
-
-  EsploraTFT.stroke(0, 0, 255);
-  EsploraTFT.println();
-  EsploraTFT.println("Arduino LCD Bitmap Example");
-  EsploraTFT.stroke(0, 0, 0);
-  EsploraTFT.println("Open serial monitor");
-  EsploraTFT.println("to run the sketch");
-
-  // initialize the serial port: it will be used to 
-  // print some diagnostic info
-  Serial.begin(9600);
-  while (!Serial) {
-    // wait for serial monitor to be open
-  }
-  
-  // try to access the SD card. If that fails (e.g.
-  // no card present), the Esplora's LED will turn red.
-  Serial.print("Initializing SD card...");
-  if (!SD.begin(SD_CS)) {
-    Serial.println("failed!");
-    Esplora.writeRed(255);
-    return;
-  }
-  Serial.println("OK!");
-  
-  // clear the GLCD screen before starting
-  EsploraTFT.background(255, 255, 255);
-  
-  // now that the SD card can be access, try to load the
-  // image file. The Esplora LED will turn green or red if
-  // the loading went OK or not.
-  Esplora.writeRGB(0, 0, 0);
-  logo = EsploraTFT.loadImage("arduino.bmp");
-  if (logo.isValid()) {
-    Esplora.writeGreen(255);
-  }
-  else
-    Esplora.writeRed(255);
-
-}
-
-void loop() {
-  // don't do anything if the image wasn't loaded correctly.
-  if (logo.isValid() == false) {
-    return;
-  }
-  
-  Serial.println("drawing image");
-  
-  // get a random location where to draw the image.
-  // To avoid the image to be draw outside the screen,
-  // take into account the image size.
-  int x = random(EsploraTFT.width() - logo.width());
-  int y = random(EsploraTFT.height() - logo.height());
-  
-  // draw the image to the screen
-  EsploraTFT.image(logo, x, y);
-  
-  // wait a little bit before drawing again
-  delay(1500);
-}
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp
deleted file mode 100644
index 09c670a..0000000
--- a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp
+++ /dev/null