Merged 1.0.5

2 files changed, 101 insertions, 0 deletions

diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino
new file mode 100644
index 0000000..3d3f230
--- /dev/null
+++ b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino
@@ -0,0 +1,101 @@
+/*
+
+ Esplora TFT Bitmap Logos
+ 
+ This example for the Arduino TFT screen is for use
+ with an Arduino Esplora.
+ 
+ This example reads an image file from a micro-SD card
+ and draws it on the screen, at random locations.
+ 
+ There is a .bmp file included with this sketch. 
+ - open the sketch folder (Ctrl-K or Cmd-K)
+ - copy the "arduino.bmp" file to a micro-SD
+ - put the SD into the SD slot of the Arduino LCD module.
+ 
+ This example code is in the public domain.
+ 
+ Created 19 April 2013 by Enrico Gueli
+ 
+ http://arduino.cc/en/Tutorial/EsploraTFTBitmapLogo
+ 
+ */
+ 
+// include the necessary libraries
+#include <Esplora.h>
+#include <SPI.h>
+#include <SD.h>
+#include <TFT.h>            // Arduino LCD library
+
+// the Esplora pin connected to the chip select line for SD card
+#define SD_CS    8
+
+// this variable represents the image to be drawn on screen
+PImage logo;
+
+void setup() {
+  // initialize the GLCD and show a message
+  // asking the user to open the serial line
+  EsploraTFT.begin();
+  EsploraTFT.background(255, 255, 255);
+
+  EsploraTFT.stroke(0, 0, 255);
+  EsploraTFT.println();
+  EsploraTFT.println("Arduino LCD Bitmap Example");
+  EsploraTFT.stroke(0, 0, 0);
+  EsploraTFT.println("Open serial monitor");
+  EsploraTFT.println("to run the sketch");
+
+  // initialize the serial port: it will be used to 
+  // print some diagnostic info
+  Serial.begin(9600);
+  while (!Serial) {
+    // wait for serial monitor to be open
+  }
+  
+  // try to access the SD card. If that fails (e.g.
+  // no card present), the Esplora's LED will turn red.
+  Serial.print("Initializing SD card...");
+  if (!SD.begin(SD_CS)) {
+    Serial.println("failed!");
+    Esplora.writeRed(255);
+    return;
+  }
+  Serial.println("OK!");
+  
+  // clear the GLCD screen before starting
+  EsploraTFT.background(255, 255, 255);
+  
+  // now that the SD card can be access, try to load the
+  // image file. The Esplora LED will turn green or red if
+  // the loading went OK or not.
+  Esplora.writeRGB(0, 0, 0);
+  logo = EsploraTFT.loadImage("arduino.bmp");
+  if (logo.isValid()) {
+    Esplora.writeGreen(255);
+  }
+  else
+    Esplora.writeRed(255);
+
+}
+
+void loop() {
+  // don't do anything if the image wasn't loaded correctly.
+  if (logo.isValid() == false) {
+    return;
+  }
+  
+  Serial.println("drawing image");
+  
+  // get a random location where to draw the image.
+  // To avoid the image to be draw outside the screen,
+  // take into account the image size.
+  int x = random(EsploraTFT.width() - logo.width());
+  int y = random(EsploraTFT.height() - logo.height());
+  
+  // draw the image to the screen
+  EsploraTFT.image(logo, x, y);
+  
+  // wait a little bit before drawing again
+  delay(1500);
+}
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp
new file mode 100644
index 0000000..09c670a
--- /dev/null
+++ b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp