Moving all AVR specific libraries to hardware/avr

2 files changed, 71 insertions, 0 deletions

diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
new file mode 100644
index 0000000..1f535bd
--- /dev/null
+++ b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
@@ -0,0 +1,21 @@
+#include <SoftwareSerial.h>
+
+SoftwareSerial mySerial(2, 3);
+
+void setup()  
+{
+  Serial.begin(57600);
+  Serial.println("Goodnight moon!");
+
+  // set the data rate for the SoftwareSerial port
+  mySerial.begin(4800);
+  mySerial.println("Hello, world?");
+}
+
+void loop() // run over and over
+{
+  if (mySerial.available())
+    Serial.write(mySerial.read());
+  if (Serial.available())
+    mySerial.write(Serial.read());
+}
diff --git a/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde b/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde
new file mode 100755
index 0000000..1db4536
--- /dev/null
+++ b/libraries/SoftwareSerial/examples/TwoPortRXExample/TwoPortRXExample.pde
@@ -0,0 +1,50 @@
+#include <SoftwareSerial.h>

+

+SoftwareSerial ss(2, 3);

+SoftwareSerial ss2(4, 5);

+

+/* This sample shows how to correctly process received data

+   on two different "soft" serial ports.  Here we listen on 

+   the first port (ss) until we receive a '?' character.  Then

+   we begin listening on the other soft port.

+*/

+

+void setup()

+{

+  // Start the HW serial port

+  Serial.begin(57600);

+

+  // Start each soft serial port

+  ss.begin(4800);

+  ss2.begin(4800);

+

+  // By default, the most recently "begun" port is listening.

+  // We want to listen on ss, so let's explicitly select it.

+  ss.listen();

+  

+  // Simply wait for a ? character to come down the pipe

+  Serial.println("Data from the first port: ");

+  char c = 0;

+  do

+    if (ss.available())

+    {

+      c = (char)ss.read();

+      Serial.print(c);

+    }

+  while (c != '?');

+

+  // Now listen on the second port

+  ss2.listen();

+

+  Serial.println("Data from the second port: ");

+}

+

+void loop()

+{

+  if (ss2.available())

+  {

+    char c = (char)ss2.read();

+    Serial.print(c);

+  }

+}

+