Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 518 deletions

diff --git a/libraries/SoftwareSerial/SoftwareSerial.cpp b/libraries/SoftwareSerial/SoftwareSerial.cpp
deleted file mode 100644
index 64496fe..0000000
--- a/libraries/SoftwareSerial/SoftwareSerial.cpp
+++ /dev/null
@@ -1,518 +0,0 @@
-/*

-SoftwareSerial.cpp (formerly NewSoftSerial.cpp) - 

-Multi-instance software serial library for Arduino/Wiring

--- Interrupt-driven receive and other improvements by ladyada

-   (http://ladyada.net)

--- Tuning, circular buffer, derivation from class Print/Stream,

-   multi-instance support, porting to 8MHz processors,

-   various optimizations, PROGMEM delay tables, inverse logic and 

-   direct port writing by Mikal Hart (http://www.arduiniana.org)

--- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com)

--- 20MHz processor support by Garrett Mace (http://www.macetech.com)

--- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/)

-

-This library is free software; you can redistribute it and/or

-modify it under the terms of the GNU Lesser General Public

-License as published by the Free Software Foundation; either

-version 2.1 of the License, or (at your option) any later version.

-

-This library is distributed in the hope that it will be useful,

-but WITHOUT ANY WARRANTY; without even the implied warranty of

-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

-Lesser General Public License for more details.

-

-You should have received a copy of the GNU Lesser General Public

-License along with this library; if not, write to the Free Software

-Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

-

-The latest version of this library can always be found at

-http://arduiniana.org.

-*/

-

-// When set, _DEBUG co-opts pins 11 and 13 for debugging with an

-// oscilloscope or logic analyzer.  Beware: it also slightly modifies

-// the bit times, so don't rely on it too much at high baud rates

-#define _DEBUG 0

-#define _DEBUG_PIN1 11

-#define _DEBUG_PIN2 13

-// 

-// Includes

-// 

-#include <avr/interrupt.h>

-#include <avr/pgmspace.h>

-#include <Arduino.h>

-#include <SoftwareSerial.h>

-//

-// Lookup table

-//

-typedef struct _DELAY_TABLE

-{

-  long baud;

-  unsigned short rx_delay_centering;

-  unsigned short rx_delay_intrabit;

-  unsigned short rx_delay_stopbit;

-  unsigned short tx_delay;

-} DELAY_TABLE;

-

-#if F_CPU == 16000000

-

-static const DELAY_TABLE PROGMEM table[] = 

-{

-  //  baud    rxcenter   rxintra    rxstop    tx

-  { 115200,   1,         17,        17,       12,    },

-  { 57600,    10,        37,        37,       33,    },

-  { 38400,    25,        57,        57,       54,    },

-  { 31250,    31,        70,        70,       68,    },

-  { 28800,    34,        77,        77,       74,    },

-  { 19200,    54,        117,       117,      114,   },

-  { 14400,    74,        156,       156,      153,   },

-  { 9600,     114,       236,       236,      233,   },

-  { 4800,     233,       474,       474,      471,   },

-  { 2400,     471,       950,       950,      947,   },

-  { 1200,     947,       1902,      1902,     1899,  },

-  { 600,      1902,      3804,      3804,     3800,  },

-  { 300,      3804,      7617,      7617,     7614,  },

-};

-

-const int XMIT_START_ADJUSTMENT = 5;

-

-#elif F_CPU == 8000000

-

-static const DELAY_TABLE table[] PROGMEM = 

-{

-  //  baud    rxcenter    rxintra    rxstop  tx

-  { 115200,   1,          5,         5,      3,      },

-  { 57600,    1,          15,        15,     13,     },

-  { 38400,    2,          25,        26,     23,     },

-  { 31250,    7,          32,        33,     29,     },

-  { 28800,    11,         35,        35,     32,     },

-  { 19200,    20,         55,        55,     52,     },

-  { 14400,    30,         75,        75,     72,     },

-  { 9600,     50,         114,       114,    112,    },

-  { 4800,     110,        233,       233,    230,    },

-  { 2400,     229,        472,       472,    469,    },

-  { 1200,     467,        948,       948,    945,    },

-  { 600,      948,        1895,      1895,   1890,   },

-  { 300,      1895,       3805,      3805,   3802,   },

-};

-

-const int XMIT_START_ADJUSTMENT = 4;

-

-#elif F_CPU == 20000000

-

-// 20MHz support courtesy of the good people at macegr.com.

-// Thanks, Garrett!

-

-static const DELAY_TABLE PROGMEM table[] =

-{

-  //  baud    rxcenter    rxintra    rxstop  tx

-  { 115200,   3,          21,        21,     18,     },

-  { 57600,    20,         43,        43,     41,     },

-  { 38400,    37,         73,        73,     70,     },

-  { 31250,    45,         89,        89,     88,     },

-  { 28800,    46,         98,        98,     95,     },

-  { 19200,    71,         148,       148,    145,    },

-  { 14400,    96,         197,       197,    194,    },

-  { 9600,     146,        297,       297,    294,    },

-  { 4800,     296,        595,       595,    592,    },

-  { 2400,     592,        1189,      1189,   1186,   },

-  { 1200,     1187,       2379,      2379,   2376,   },

-  { 600,      2379,       4759,      4759,   4755,   },

-  { 300,      4759,       9523,      9523,   9520,   },

-};

-

-const int XMIT_START_ADJUSTMENT = 6;

-

-#else

-

-#error This version of SoftwareSerial supports only 20, 16 and 8MHz processors

-

-#endif

-

-//

-// Statics

-//

-SoftwareSerial *SoftwareSerial::active_object = 0;

-char SoftwareSerial::_receive_buffer[_SS_MAX_RX_BUFF]; 

-volatile uint8_t SoftwareSerial::_receive_buffer_tail = 0;

-volatile uint8_t SoftwareSerial::_receive_buffer_head = 0;

-

-//

-// Debugging

-//

-// This function generates a brief pulse

-// for debugging or measuring on an oscilloscope.

-inline void DebugPulse(uint8_t pin, uint8_t count)

-{

-#if _DEBUG

-  volatile uint8_t *pport = portOutputRegister(digitalPinToPort(pin));

-

-  uint8_t val = *pport;

-  while (count--)

-  {

-    *pport = val | digitalPinToBitMask(pin);

-    *pport = val;

-  }

-#endif

-}

-

-//

-// Private methods

-//

-

-/* static */ 

-inline void SoftwareSerial::tunedDelay(uint16_t delay) { 

-  uint8_t tmp=0;

-

-  asm volatile("sbiw    %0, 0x01 \n\t"

-    "ldi %1, 0xFF \n\t"

-    "cpi %A0, 0xFF \n\t"

-    "cpc %B0, %1 \n\t"

-    "brne .-10 \n\t"

-    : "+r" (delay), "+a" (tmp)

-    : "0" (delay)

-    );

-}

-

-// This function sets the current object as the "listening"

-// one and returns true if it replaces another 

-bool SoftwareSerial::listen()

-{

-  if (active_object != this)

-  {

-    _buffer_overflow = false;

-    uint8_t oldSREG = SREG;

-    cli();

-    _receive_buffer_head = _receive_buffer_tail = 0;

-    active_object = this;

-    SREG = oldSREG;

-    return true;

-  }

-

-  return false;

-}

-

-//

-// The receive routine called by the interrupt handler

-//

-void SoftwareSerial::recv()

-{

-

-#if GCC_VERSION < 40302

-// Work-around for avr-gcc 4.3.0 OSX version bug

-// Preserve the registers that the compiler misses

-// (courtesy of Arduino forum user *etracer*)

-  asm volatile(

-    "push r18 \n\t"

-    "push r19 \n\t"

-    "push r20 \n\t"

-    "push r21 \n\t"

-    "push r22 \n\t"

-    "push r23 \n\t"

-    "push r26 \n\t"

-    "push r27 \n\t"

-    ::);

-#endif  

-

-  uint8_t d = 0;

-

-  // If RX line is high, then we don't see any start bit

-  // so interrupt is probably not for us

-  if (_inverse_logic ? rx_pin_read() : !rx_pin_read())

-  {

-    // Wait approximately 1/2 of a bit width to "center" the sample

-    tunedDelay(_rx_delay_centering);

-    DebugPulse(_DEBUG_PIN2, 1);

-

-    // Read each of the 8 bits

-    for (uint8_t i=0x1; i; i <<= 1)

-    {

-      tunedDelay(_rx_delay_intrabit);

-      DebugPulse(_DEBUG_PIN2, 1);

-      uint8_t noti = ~i;

-      if (rx_pin_read())

-        d |= i;

-      else // else clause added to ensure function timing is ~balanced

-        d &= noti;

-    }

-

-    // skip the stop bit

-    tunedDelay(_rx_delay_stopbit);

-    DebugPulse(_DEBUG_PIN2, 1);

-

-    if (_inverse_logic)

-      d = ~d;

-

-    // if buffer full, set the overflow flag and return

-    if ((_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF != _receive_buffer_head) 

-    {

-      // save new data in buffer: tail points to where byte goes

-      _receive_buffer[_receive_buffer_tail] = d; // save new byte

-      _receive_buffer_tail = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF;

-    } 

-    else 

-    {

-#if _DEBUG // for scope: pulse pin as overflow indictator

-      DebugPulse(_DEBUG_PIN1, 1);

-#endif

-      _buffer_overflow = true;

-    }

-  }

-

-#if GCC_VERSION < 40302

-// Work-around for avr-gcc 4.3.0 OSX version bug

-// Restore the registers that the compiler misses

-  asm volatile(

-    "pop r27 \n\t"

-    "pop r26 \n\t"

-    "pop r23 \n\t"

-    "pop r22 \n\t"

-    "pop r21 \n\t"

-    "pop r20 \n\t"

-    "pop r19 \n\t"

-    "pop r18 \n\t"

-    ::);

-#endif

-}

-

-void SoftwareSerial::tx_pin_write(uint8_t pin_state)

-{

-  if (pin_state == LOW)

-    *_transmitPortRegister &= ~_transmitBitMask;

-  else

-    *_transmitPortRegister |= _transmitBitMask;

-}

-

-uint8_t SoftwareSerial::rx_pin_read()

-{

-  return *_receivePortRegister & _receiveBitMask;

-}

-

-//

-// Interrupt handling

-//

-

-/* static */

-inline void SoftwareSerial::handle_interrupt()

-{

-  if (active_object)

-  {

-    active_object->recv();

-  }

-}

-

-#if defined(PCINT0_vect)

-ISR(PCINT0_vect)

-{

-  SoftwareSerial::handle_interrupt();

-}

-#endif

-

-#if defined(PCINT1_vect)

-ISR(PCINT1_vect)

-{

-  SoftwareSerial::handle_interrupt();

-}

-#endif

-

-#if defined(PCINT2_vect)

-ISR(PCINT2_vect)

-{

-  SoftwareSerial::handle_interrupt();

-}

-#endif

-

-#if defined(PCINT3_vect)

-ISR(PCINT3_vect)

-{

-  SoftwareSerial::handle_interrupt();

-}

-#endif

-

-//

-// Constructor

-//

-SoftwareSerial::SoftwareSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_logic /* = false */) : 

-  _rx_delay_centering(0),

-  _rx_delay_intrabit(0),

-  _rx_delay_stopbit(0),

-  _tx_delay(0),

-  _buffer_overflow(false),

-  _inverse_logic(inverse_logic)

-{

-  setTX(transmitPin);

-  setRX(receivePin);

-}

-

-//

-// Destructor

-//

-SoftwareSerial::~SoftwareSerial()

-{

-  end();

-}

-

-void SoftwareSerial::setTX(uint8_t tx)

-{

-  pinMode(tx, OUTPUT);

-  digitalWrite(tx, HIGH);

-  _transmitBitMask = digitalPinToBitMask(tx);

-  uint8_t port = digitalPinToPort(tx);

-  _transmitPortRegister = portOutputRegister(port);

-}

-

-void SoftwareSerial::setRX(uint8_t rx)

-{

-  pinMode(rx, INPUT);

-  if (!_inverse_logic)

-    digitalWrite(rx, HIGH);  // pullup for normal logic!

-  _receivePin = rx;

-  _receiveBitMask = digitalPinToBitMask(rx);

-  uint8_t port = digitalPinToPort(rx);

-  _receivePortRegister = portInputRegister(port);

-}

-

-//

-// Public methods

-//

-

-void SoftwareSerial::begin(long speed)

-{

-  _rx_delay_centering = _rx_delay_intrabit = _rx_delay_stopbit = _tx_delay = 0;

-

-  for (unsigned i=0; i<sizeof(table)/sizeof(table[0]); ++i)

-  {

-    long baud = pgm_read_dword(&table[i].baud);

-    if (baud == speed)

-    {

-      _rx_delay_centering = pgm_read_word(&table[i].rx_delay_centering);

-      _rx_delay_intrabit = pgm_read_word(&table[i].rx_delay_intrabit);

-      _rx_delay_stopbit = pgm_read_word(&table[i].rx_delay_stopbit);

-      _tx_delay = pgm_read_word(&table[i].tx_delay);

-      break;

-    }

-  }

-

-  // Set up RX interrupts, but only if we have a valid RX baud rate

-  if (_rx_delay_stopbit)

-  {

-    if (digitalPinToPCICR(_receivePin))

-    {

-      *digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin));

-      *digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin));

-    }

-    tunedDelay(_tx_delay); // if we were low this establishes the end

-  }

-

-#if _DEBUG

-  pinMode(_DEBUG_PIN1, OUTPUT);

-  pinMode(_DEBUG_PIN2, OUTPUT);

-#endif

-

-  listen();

-}

-

-void SoftwareSerial::end()

-{

-  if (digitalPinToPCMSK(_receivePin))

-    *digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin));

-}

-

-

-// Read data from buffer

-int SoftwareSerial::read()

-{

-  if (!isListening())

-    return -1;

-

-  // Empty buffer?

-  if (_receive_buffer_head == _receive_buffer_tail)

-    return -1;

-

-  // Read from "head"

-  uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte

-  _receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF;

-  return d;

-}

-

-int SoftwareSerial::available()

-{

-  if (!isListening())

-    return 0;

-

-  return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF;

-}

-

-size_t SoftwareSerial::write(uint8_t b)

-{

-  if (_tx_delay == 0) {

-    setWriteError();

-    return 0;

-  }

-

-  uint8_t oldSREG = SREG;

-  cli();  // turn off interrupts for a clean txmit

-

-  // Write the start bit

-  tx_pin_write(_inverse_logic ? HIGH : LOW);

-  tunedDelay(_tx_delay + XMIT_START_ADJUSTMENT);

-

-  // Write each of the 8 bits

-  if (_inverse_logic)

-  {

-    for (byte mask = 0x01; mask; mask <<= 1)

-    {

-      if (b & mask) // choose bit

-        tx_pin_write(LOW); // send 1

-      else

-        tx_pin_write(HIGH); // send 0

-    

-      tunedDelay(_tx_delay);

-    }

-

-    tx_pin_write(LOW); // restore pin to natural state

-  }

-  else

-  {

-    for (byte mask = 0x01; mask; mask <<= 1)

-    {

-      if (b & mask) // choose bit

-        tx_pin_write(HIGH); // send 1

-      else

-        tx_pin_write(LOW); // send 0

-    

-      tunedDelay(_tx_delay);

-    }

-

-    tx_pin_write(HIGH); // restore pin to natural state

-  }

-

-  SREG = oldSREG; // turn interrupts back on

-  tunedDelay(_tx_delay);

-  

-  return 1;

-}

-

-void SoftwareSerial::flush()

-{

-  if (!isListening())

-    return;

-

-  uint8_t oldSREG = SREG;

-  cli();

-  _receive_buffer_head = _receive_buffer_tail = 0;

-  SREG = oldSREG;

-}

-

-int SoftwareSerial::peek()

-{

-  if (!isListening())

-    return -1;

-

-  // Empty buffer?

-  if (_receive_buffer_head == _receive_buffer_tail)

-    return -1;

-

-  // Read from "head"

-  return _receive_buffer[_receive_buffer_head];

-}