Merged 1.0.5

16 files changed, 783 insertions, 0 deletions

diff --git a/libraries/Robot_Control/examples/learn/AllIOPorts/AllIOPorts.ino b/libraries/Robot_Control/examples/learn/AllIOPorts/AllIOPorts.ino
new file mode 100644
index 0000000..3520214
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/AllIOPorts/AllIOPorts.ino
@@ -0,0 +1,149 @@
+/*
+ All IO Ports
+ 
+ This example goes through all the IO ports on your robot and
+ reads/writes from/to them. Uncomment the different lines inside 
+ the loop to test the different possibilities.
+
+ The TK inputs on the Control Board are multiplexed and therefore 
+ it is not recommended to use them as outputs. The TKD pins on the
+ Control Board as well as the TK pins on the Motor Board go directly
+ to the microcontroller and therefore can be used both as inputs 
+ and outputs.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+// use arrays to store the names of the pins to be read
+uint8_t arr[]  = { TK0, TK1, TK2, TK3, TK4, TK5, TK6, TK7 };
+uint8_t arr2[] = { TKD0, TKD1, TKD2, TKD3, TKD4, TKD5 };
+uint8_t arr3[] = { B_TK1, B_TK2, B_TK3, B_TK4 };
+
+void setup(){
+  // initialize the robot
+  Robot.begin();
+
+  // open the serial port to send the information of what you are reading
+  Serial.begin(9600);
+}
+
+void loop(){
+  // read all the TK inputs at the Motor Board as analog 
+  analogReadB_TKs();
+
+  // read all the TK inputs at the Motor Board as digital
+  //digitalReadB_TKs();
+
+  // read all the TK inputs at the Control Board as analog
+  //analogReadTKs();
+
+  // read all the TK inputs at the Control Board as digital
+  //digitalReadTKs();
+
+  // read all the TKD inputs at the Control Board as analog
+  //analogReadTKDs();
+
+  // read all the TKD inputs at the Control Board as digital
+  //digitalReadTKDs();
+
+  // write all the TK outputs at the Motor Board as digital
+  //digitalWriteB_TKs();
+
+  // write all the TKD outputs at the Control Board as digital
+  //digitalWriteTKDs();
+  delay(5);  
+}
+
+// read all TK inputs on the Control Board as analog inputs
+void analogReadTKs() {
+  for(int i=0;i<8;i++) {
+    Serial.print(Robot.analogRead(arr[i]));
+    Serial.print(",");
+  }
+  Serial.println("");
+}
+
+// read all TK inputs on the Control Board as digital inputs
+void digitalReadTKs() {
+  for(int i=0;i<8;i++) {
+    Serial.print(Robot.digitalRead(arr[i]));
+    Serial.print(",");
+  }
+  Serial.println("");
+}
+
+// read all TKD inputs on the Control Board as analog inputs
+void analogReadTKDs() {
+  for(int i=0; i<6; i++) {
+    Serial.print(Robot.analogRead(arr2[i]));
+    Serial.print(",");
+  }
+  Serial.println("");
+}
+
+// read all TKD inputs on the Control Board as digital inputs
+void digitalReadTKDs() {
+  for(int i=0; i<6; i++) {
+    Serial.print(Robot.digitalRead(arr2[i]));
+    Serial.print(",");
+  }
+  Serial.println("");
+}
+
+// write all TKD outputs on the Control Board as digital outputs
+void digitalWriteTKDs() {
+  // turn all the pins on
+  for(int i=0; i<6; i++) {
+    Robot.digitalWrite(arr2[i], HIGH);
+  }
+  delay(500);
+
+  // turn all the pins off
+  for(int i=0; i<6; i++){
+    Robot.digitalWrite(arr2[i], LOW);
+  }
+  delay(500);
+}
+
+// write all TK outputs on the Motor Board as digital outputs
+void digitalWriteB_TKs() {
+  // turn all the pins on
+  for(int i=0; i<4; i++) {
+    Robot.digitalWrite(arr3[i], HIGH);
+  }
+  delay(500);
+
+  // turn all the pins off
+  for(int i=0; i<4; i++) {
+    Robot.digitalWrite(arr3[i], LOW);
+  }
+  delay(500);
+}
+
+// read all TK inputs on the Motor Board as analog inputs
+void analogReadB_TKs() {
+  for(int i=0; i<4; i++) {
+    Serial.print(Robot.analogRead(arr3[i]));
+    Serial.print(",");
+  }
+  Serial.println("");
+}
+
+// read all TKD inputs on the Motor Board as digital inputs
+void digitalReadB_TKs() {
+  for(int i=0; i<4; i++) {
+    Serial.print(Robot.digitalRead(arr3[i]));
+    Serial.print(",");
+  }
+  Serial.println("");
+}
diff --git a/libraries/Robot_Control/examples/learn/Beep/Beep.ino b/libraries/Robot_Control/examples/learn/Beep/Beep.ino
new file mode 100644
index 0000000..1a78673
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/Beep/Beep.ino
@@ -0,0 +1,39 @@
+/*
+ Beep
+ 
+ Test different pre-configured beeps on
+ the robot's speaker.
+
+ Possible beeps are:
+ - BEEP_SIMPLE
+ - BEEP_DOUBLE
+ - BEEP_LONG
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the sound speaker
+  Robot.beginSpeaker();
+}
+void loop() {
+  Robot.beep(BEEP_SIMPLE);
+  delay(1000);
+  Robot.beep(BEEP_DOUBLE);
+  delay(1000);
+  Robot.beep(BEEP_LONG);
+  delay(1000);
+}
diff --git a/libraries/Robot_Control/examples/learn/CleanEEPROM/CleanEEPROM.ino b/libraries/Robot_Control/examples/learn/CleanEEPROM/CleanEEPROM.ino
new file mode 100644
index 0000000..ae14bdd
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/CleanEEPROM/CleanEEPROM.ino
@@ -0,0 +1,41 @@
+/*
+ Clean EEPROM
+ 
+ This example erases the user information stored on the
+ external EEPROM memory chip on your robot.
+
+ BEWARE, this will erase the following information:
+ - your name
+ - your robots name given by you
+ - your city and country if you configured them via software
+
+ EEPROMs shouldn't be rewritten too often, therefore the
+ code runs only during setup and not inside loop.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup(){
+  // initialize the robot
+  Robot.begin();
+
+  // write empty strings for the different fields
+  Robot.userNameWrite("");
+  Robot.robotNameWrite("");
+  Robot.cityNameWrite("");
+  Robot.countryNameWrite(""); 
+}
+
+void loop(){
+  // do nothing  
+}
diff --git a/libraries/Robot_Control/examples/learn/Compass/Compass.ino b/libraries/Robot_Control/examples/learn/Compass/Compass.ino
new file mode 100644
index 0000000..4170ab7
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/Compass/Compass.ino
@@ -0,0 +1,41 @@
+/*
+ Compass
+ 
+ Try the compass both on the robot's TFT
+ and through the serial port.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the robot's screen
+  Robot.beginTFT();
+
+  // initialize the serial port
+  Serial.begin(9600);
+}
+
+void loop() {
+  // read the compass
+  int compass = Robot.compassRead();
+
+  // print out the sensor's value
+  Serial.println(compass);  
+  
+  // show the value on the robot's screen
+  Robot.drawCompass(compass);
+}
+
diff --git a/libraries/Robot_Control/examples/learn/IRArray/IRArray.ino b/libraries/Robot_Control/examples/learn/IRArray/IRArray.ino
new file mode 100644
index 0000000..36b4acf
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/IRArray/IRArray.ino
@@ -0,0 +1,44 @@
+/*
+ IR array
+ 
+ Read the analog value of the IR sensors at the 
+ bottom of the robot. The also-called line following 
+ sensors are a series of pairs of IR sender/receiver
+ used to detect how dark it is underneath the robot.
+
+ The information coming from the sensor array is stored
+ into the Robot.IRarray[] and updated using the Robot.updateIR()
+ method.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup(){
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the serial port
+  Serial.begin(9600);
+}
+
+void loop(){
+  // store the sensor information into the array 
+  Robot.updateIR();
+
+  // iterate the array and print the data to the Serial port
+  for(int i=0; i<5; i++){
+    Serial.print(Robot.IRarray[i]);
+    Serial.print(" ");
+  }
+  Serial.println("");
+}
diff --git a/libraries/Robot_Control/examples/learn/LCDDebugPrint/LCDDebugPrint.ino b/libraries/Robot_Control/examples/learn/LCDDebugPrint/LCDDebugPrint.ino
new file mode 100644
index 0000000..0078b77
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/LCDDebugPrint/LCDDebugPrint.ino
@@ -0,0 +1,37 @@
+/*
+ LCD Debug Print
+ 
+ Use the Robot's library function debugPrint() to
+ quickly send a sensor reading to the robot's creen.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+int value;
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the screen
+  Robot.beginTFT();
+}
+void loop(){
+  // read a value
+  value = analogRead(A4);
+
+  // send the value to the screen
+  Robot.debugPrint(value);
+
+  delay(40);
+}
diff --git a/libraries/Robot_Control/examples/learn/LCDPrint/LCDPrint.ino b/libraries/Robot_Control/examples/learn/LCDPrint/LCDPrint.ino
new file mode 100644
index 0000000..d34168c
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/LCDPrint/LCDPrint.ino
@@ -0,0 +1,44 @@
+/*
+ LCD Print
+ 
+ Print the reading from a sensor to the screen.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+int value;
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the robot's screen
+  Robot.beginLCD();
+}
+
+void loop() {
+  // read a analog port
+  value=Robot.analogRead(TK4);
+
+  // write the sensor value on the screen
+  Robot.fill(0, 255, 0);
+  Robot.textSize(1);
+  Robot.text(value, 0, 0);  
+
+  delay(500);
+
+  // erase the previous text on the screen
+  Robot.fill(255, 255, 255);
+  Robot.textSize(1);
+  Robot.text(value, 0, 0);  
+}
diff --git a/libraries/Robot_Control/examples/learn/LCDWriteText/LCDWriteText.ino b/libraries/Robot_Control/examples/learn/LCDWriteText/LCDWriteText.ino
new file mode 100644
index 0000000..e34a7d2
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/LCDWriteText/LCDWriteText.ino
@@ -0,0 +1,41 @@
+/*
+ LCD Write Text
+ 
+ Use the Robot's library function text() to
+ print out text to the robot's screen. Take
+ into account that you need to erase the
+ information before continuing writing.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the screen
+  Robot.beginTFT();
+}
+void loop() {
+  Robot.stroke(0, 0, 0);              // choose the color black
+  Robot.text("Hello World", 0, 0);  // print the text
+  delay(2000);
+  Robot.stroke(255, 255, 255);        // choose the color white
+  Robot.text("Hello World", 0, 0);  // writing text in the same color as the BG erases the text!
+  
+  Robot.stroke(0, 0, 0);              // choose the color black
+  Robot.text("I am a robot", 0, 0); // print the text
+  delay(3000);
+  Robot.stroke(255, 255, 255);         // choose the color black
+  Robot.text("I am a robot", 0, 0);  // print the text
+}
diff --git a/libraries/Robot_Control/examples/learn/LineFollowWithPause/LineFollowWithPause.ino b/libraries/Robot_Control/examples/learn/LineFollowWithPause/LineFollowWithPause.ino
new file mode 100644
index 0000000..a3d3fc0
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/LineFollowWithPause/LineFollowWithPause.ino
@@ -0,0 +1,49 @@
+/*
+ Line Following with Pause
+ 
+ As the robot has two processors, one to command the motors and one to
+ take care of the screen and user input, it is possible to write 
+ programs that put one part of the robot to do something and get the
+ other half to control it.
+
+ This example shows how the Control Board assigns the Motor one to
+ follow a line, but asks it to stop every 3 seconds.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the screen
+  Robot.beginTFT();
+
+  // get some time to place the robot on the ground
+  delay(3000);
+
+  // set the robot in line following mode
+  Robot.setMode(MODE_LINE_FOLLOW);
+}
+
+void loop() {
+      // tell the robot to take a break and stop
+      Robot.pauseMode(true);
+      Robot.debugPrint('p');
+      delay(3000);
+
+      // tell the robot to move on
+      Robot.pauseMode(false);
+      Robot.debugPrint('>');
+      delay(3000);
+}
diff --git a/libraries/Robot_Control/examples/learn/Melody/Melody.ino b/libraries/Robot_Control/examples/learn/Melody/Melody.ino
new file mode 100644
index 0000000..6c049a7
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/Melody/Melody.ino
@@ -0,0 +1,62 @@
+/*
+ Melody
+ 
+ Plays a melody stored in a string. 
+ 
+ The notes and durations are encoded as follows:
+
+ NOTES:
+ c  play "C"
+ C  play "#C"
+ d  play "D"
+ D  play "#D"
+ e  play "E"
+ f  play "F"
+ F  play "#F"
+ g  play "G"
+ G  play "#G"
+ a  play "A"
+ A  play "#A"
+ b  play "B"
+ -  silence
+
+ DURATIONS:
+ 1  Set as full note
+ 2  Set as half note
+ 4  Set as quarter note
+ 8  Set as eigth note
+
+ SPECIAL NOTATION:
+ .  Make the previous note 3/4 the length
+
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+
+ This code uses the Squawk sound library designed by STG. For
+ more information about it check: http://github.com/stg/squawk
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the sound library
+  Robot.beginSpeaker();
+}
+
+void loop() {
+  // array containing the melody
+  char aTinyMelody[] = "8eF-FFga4b.a.g.F.8beee-d2e.1-";
+
+  // play the melody
+  Robot.playMelody(aTinyMelody);
+}
diff --git a/libraries/Robot_Control/examples/learn/MotorTest/MotorTest.ino b/libraries/Robot_Control/examples/learn/MotorTest/MotorTest.ino
new file mode 100644
index 0000000..baaaf06
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/MotorTest/MotorTest.ino
@@ -0,0 +1,41 @@
+/*
+ Motor Test
+ 
+ Just see if the robot can move and turn.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+}
+
+void loop() {
+  Robot.motorsWrite(255,255);   // move forward
+  delay(2000);
+  Robot.motorsStop();           // fast stop
+  delay(1000);
+  Robot.motorsWrite(-255,-255); // backward
+  delay(1000);
+  Robot.motorsWrite(0,0);       // slow stop
+  delay(1000);
+  Robot.motorsWrite(-255,255);  // turn left
+  delay(2000);
+  Robot.motorsStop();           // fast stop
+  delay(1000);
+  Robot.motorsWrite(255,-255);  // turn right
+  delay(2000);
+  Robot.motorsStop();           // fast stop
+  delay(1000);
+}
diff --git a/libraries/Robot_Control/examples/learn/SpeedByPotentiometer/SpeedByPotentiometer.ino b/libraries/Robot_Control/examples/learn/SpeedByPotentiometer/SpeedByPotentiometer.ino
new file mode 100644
index 0000000..e97f48d
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/SpeedByPotentiometer/SpeedByPotentiometer.ino
@@ -0,0 +1,39 @@
+/*
+ Speed by Potentiometer
+ 
+ Control the robot's speed using the on-board
+ potentiometer. The speed will be printed on
+ the TFT screen. 
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+
+  // initialize the screen
+  Robot.beginTFT();
+}
+
+void loop() {
+  // read the value of the potentiometer
+  int val=map(Robot.knobRead(), 0, 1023, -255, 255);
+
+  // print the value to the TFT screen
+  Robot.debugPrint(val);
+
+  // set the same speed on both of the robot's wheels
+  Robot.motorsWrite(val,val);
+  delay(10);
+}
diff --git a/libraries/Robot_Control/examples/learn/TurnTest/TurnTest.ino b/libraries/Robot_Control/examples/learn/TurnTest/TurnTest.ino
new file mode 100644
index 0000000..543c06c
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/TurnTest/TurnTest.ino
@@ -0,0 +1,32 @@
+/*
+ Turn Test
+ 
+ Check if the robot turns a certain amount of degrees.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+}
+
+void loop(){  
+  Robot.turn(50); //turn 50 degrees to the right
+  Robot.motorsStop();
+  delay(1000);
+
+  Robot.turn(-100); //turn 100 degrees to the left
+  Robot.motorsStop();
+  delay(1000);
+}
diff --git a/libraries/Robot_Control/examples/learn/TurnTest/TurnTest.ino.orig b/libraries/Robot_Control/examples/learn/TurnTest/TurnTest.ino.orig
new file mode 100644
index 0000000..4e3624f
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/TurnTest/TurnTest.ino.orig
@@ -0,0 +1,37 @@
+/*
+ Turn Test
+ 
+ Check if the robot turns a certain amount of degrees.
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the robot
+  Robot.begin();
+}
+
+<<<<<<< HEAD
+void loop() {  
+  Robot.turn(50);  //turn 50 degrees to the right
+=======
+void loop(){  
+  Robot.turn(50);//turn 50 degrees to the right
+  Robot.motorsStop();
+>>>>>>> f062f704463222e83390b4a954e211f0f7e6e66f
+  delay(1000);
+
+  Robot.turn(-100);//turn 100 degrees to the left
+  Robot.motorsStop();
+  delay(1000);
+}
diff --git a/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino b/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino
new file mode 100644
index 0000000..5bbc0e5
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino
@@ -0,0 +1,38 @@
+/*
+ Keyboard Test
+ 
+ Check how the robot's keyboard works. This example
+ sends the data about the key pressed through the
+ serial port.
+
+ All the buttons on the Control Board are tied up to a
+ single analog input pin, in this way it is possible to multiplex a
+ whole series of buttons on one single pin.
+
+ It is possible to recalibrate the thresholds of the buttons using
+ the Robot.keyboardCalibrate() function, that takes a 5 ints long
+ array as parameter
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+void setup() {
+  // initialize the serial port
+  Serial.begin(9600);
+}
+
+void loop() {
+  // print out the keyboard readings
+  Serial.println(Robot.keyboardRead());
+  delay(100);
+}
diff --git a/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig b/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig
new file mode 100644
index 0000000..6ee6c05
--- /dev/null
+++ b/libraries/Robot_Control/examples/learn/keyboardTest/keyboardTest.ino.orig
@@ -0,0 +1,49 @@
+/*
+ Keyboard Test
+ 
+ Check how the robot's keyboard works. This example
+ sends the data about the key pressed through the
+ serial port.
+
+ All the buttons on the Control Board are tied up to a
+ single analog input pin, in this way it is possible to multiplex a
+ whole series of buttons on one single pin.
+
+ It is possible to recalibrate the thresholds of the buttons using
+ the Robot.keyboardCalibrate() function, that takes a 5 ints long
+ array as parameter
+ 
+ Circuit:
+ * Arduino Robot
+ 
+ created 1 May 2013
+ by X. Yang
+ modified 12 May 2013
+ by D. Cuartielles
+ 
+ This example is in the public domain
+ */
+
+#include <ArduinoRobot.h>
+
+<<<<<<< HEAD
+// it is possible to use an array to calibrate
+//int vals[] = { 0, 133, 305, 481, 724 };
+
+void setup() {
+  // initialize the serial port
+  Serial.begin(9600);
+
+  // calibrate the keyboard
+  //Robot.keyboardCalibrate(vals);//For the new robot only.
+=======
+void setup(){
+  Serial.begin(9600);
+>>>>>>> f062f704463222e83390b4a954e211f0f7e6e66f
+}
+
+void loop() {
+  // print out the keyboard readings
+  Serial.println(Robot.keyboardRead());
+  delay(100);
+}