Moving the processing-5503 branch (used for Arduino 0017) into the trunk.

1 files changed, 84 insertions, 0 deletions

diff --git a/libraries/LiquidCrystal/examples/TextDirection/TextDirection.pde b/libraries/LiquidCrystal/examples/TextDirection/TextDirection.pde
new file mode 100644
index 0000000..725eb0d
--- /dev/null
+++ b/libraries/LiquidCrystal/examples/TextDirection/TextDirection.pde
@@ -0,0 +1,84 @@
+  /*
+  LiquidCrystal Library - TextDirection
+ 
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the 
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+ 
+ This sketch demonstrates how to use leftToRight() and rightToLeft()
+ to move the cursor.
+ 
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+ 
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe 
+ modified 25 July 2009
+ by David A. Mellis
+ 
+ http://www.arduino.cc/en/Tutorial/LiquidCrystal
+ 
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+int thisChar = 'a';
+
+void setup() {
+  // set up the LCD's number of rows and columns: 
+  lcd.begin(16, 2);
+  // turn on the cursor:
+  lcd.cursor();
+  Serial.begin(9600);
+}
+
+void loop() {
+  // reverse directions at 'm':
+  if (thisChar == 'm') {
+    // go right for the next letter
+    lcd.rightToLeft(); 
+  }
+  // reverse again at 's':
+  if (thisChar == 's') {
+    // go left for the next letter
+    lcd.leftToRight(); 
+  }
+  // reset at 'z':
+  if (thisChar > 'z') {
+    // go to (0,0):
+    lcd.home(); 
+    // start again at 0
+    thisChar = 'a';
+  }
+  // print the character
+  lcd.print(thisChar, BYTE);
+  // wait a second:
+  delay(1000);
+  // increment the letter:
+  thisChar++;
+}
+
+
+
+
+
+
+
+