Renaming LiquidCrystal example directories to correspond to new function names.

1 files changed, 0 insertions, 82 deletions

diff --git a/libraries/LiquidCrystal/examples/Shift/Shift.pde b/libraries/LiquidCrystal/examples/Shift/Shift.pde
deleted file mode 100644
index 3e88020..0000000
--- a/libraries/LiquidCrystal/examples/Shift/Shift.pde
+++ /dev/null
@@ -1,82 +0,0 @@
-  /*
-  LiquidCrystal Library - TextDirection
- 
- Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
- library works with all LCD displays that are compatible with the 
- Hitachi HD44780 driver. There are many of them out there, and you
- can usually tell them by the 16-pin interface.
- 
- This sketch demonstrates how to use leftToRight() and rightToLeft()
- to move the cursor.
- 
- The circuit:
- * LCD RS pin to digital pin 12
- * LCD Enable pin to digital pin 11
- * LCD D4 pin to digital pin 5
- * LCD D5 pin to digital pin 4
- * LCD D6 pin to digital pin 3
- * LCD D7 pin to digital pin 2
- * 10K resistor:
- * ends to +5V and ground
- * wiper to LCD VO pin (pin 3)
- 
- Library originally added 18 Apr 2008
- by David A. Mellis
- library modified 5 Jul 2009
- by Limor Fried (http://www.ladyada.net)
- example added 9 Jul 2009
- by Tom Igoe 
- 
- http://www.arduino.cc/en/Tutorial/LiquidCrystal
- 
- */
-
-// include the library code:
-#include <LiquidCrystal.h>
-
-// initialize the library with the numbers of the interface pins
-LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
-
-int thisChar = 'a';
-
-void setup() {
-  // set up the LCD's number of rows and columns: 
-  lcd.begin(2, 16);
-  // turn on the cursor:
-  lcd.cursor();
-  Serial.begin(9600);
-}
-
-void loop() {
-  // reverse directions at 'm':
-  if (thisChar == 'm') {
-    // go right for the next letter
-    lcd.rightToLeft(); 
-  }
-  // reverse again at 's':
-  if (thisChar == 's') {
-    // go left for the next letter
-    lcd.leftToRight(); 
-  }
-  // reset at 'z':
-  if (thisChar > 'z') {
-    // go to (0,0):
-    lcd.home(); 
-    // start again at 0
-    thisChar = 'a';
-  }
-  // print the character
-  lcd.print(thisChar, BYTE);
-  // wait a second:
-  delay(1000);
-  // increment the letter:
-  thisChar++;
-}
-
-
-
-
-
-
-
-