Moving libraries out of arduino platform / core directory and to top-level.

1 files changed, 0 insertions, 62 deletions

diff --git a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde
deleted file mode 100644
index a094c24..0000000
--- a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.pde
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-  LiquidCrystal Library - Serial Input
- 
- Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
- library works with all LCD displays that are compatible with the 
- Hitachi HD44780 driver. There are many of them out there, and you
- can usually tell them by the 16-pin interface.
- 
- This sketch displays text sent over the serial port 
- (e.g. from the Serial Monitor) on an attached LCD.
- 
- The circuit:
- * LCD RS pin to digital pin 12
- * LCD Enable pin to digital pin 11
- * LCD D4 pin to digital pin 5
- * LCD D5 pin to digital pin 4
- * LCD D6 pin to digital pin 3
- * LCD D7 pin to digital pin 2
- * 10K resistor:
- * ends to +5V and ground
- * wiper to LCD VO pin (pin 3)
- 
- Library originally added 18 Apr 2008
- by David A. Mellis
- library modified 5 Jul 2009
- by Limor Fried (http://www.ladyada.net)
- example added 9 Jul 2009
- by Tom Igoe 
-modified 25 July 2009
- by David A. Mellis
- 
- http://www.arduino.cc/en/Tutorial/LiquidCrystal
- */
-
-// include the library code:
-#include <LiquidCrystal.h>
-
-// initialize the library with the numbers of the interface pins
-LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
-
-void setup(){
-    // set up the LCD's number of rows and columns: 
-  lcd.begin(16, 2);
-  // initialize the serial communications:
-  Serial.begin(9600);
-}
-
-void loop()
-{
-  // when characters arrive over the serial port...
-  if (Serial.available()) {
-    // wait a bit for the entire message to arrive
-    delay(100);
-    // clear the screen
-    lcd.clear();
-    // read all the available characters
-    while (Serial.available() > 0) {
-      // display each character to the LCD
-      lcd.write(Serial.read());
-    }
-  }
-}