Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 116 deletions

diff --git a/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino b/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino
deleted file mode 100644
index 64df44a..0000000
--- a/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- Make Voice Call
- 
- This sketch, for the Arduino GSM shield, puts a voice call to
- a remote phone number that you enter through the serial monitor.
- To make it work, open the serial monitor, and when you see the 
- READY message, type a phone number. Make sure the serial monitor 
- is set to send a just newline when you press return.
- 
- Circuit:
- * GSM shield 
- * Voice circuit. 
- With no voice circuit the call will send nor receive any sound
- 
- 
- created Mar 2012
- by Javier Zorzano
- 
- This example is in the public domain.
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess; // include a 'true' parameter for debug enabled
-GSMVoiceCall vcs;
-
-String remoteNumber = "";  // the number you will call
-char charbuffer[20];
-
-void setup()
-{
-
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("Make Voice Call");
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  Serial.println("GSM initialized.");
-  Serial.println("Enter phone number to call.");
-
-}
-
-void loop()
-{
-
-  // add any incoming characters to the String:
-  while (Serial.available() > 0)
-  {
-    char inChar = Serial.read();
-    // if it's a newline, that means you should make the call:
-    if (inChar == '\n')
-    {
-      // make sure the phone number is not too long:
-      if (remoteNumber.length() < 20)
-      {
-        // let the user know you're calling:
-        Serial.print("Calling to : ");
-        Serial.println(remoteNumber);
-        Serial.println();
-
-        // Call the remote number
-        remoteNumber.toCharArray(charbuffer, 20);
-        
-        
-        // Check if the receiving end has picked up the call
-        if(vcs.voiceCall(charbuffer))
-        {
-          Serial.println("Call Established. Enter line to end");
-          // Wait for some input from the line
-          while(Serial.read()!='\n' && (vcs.getvoiceCallStatus()==TALKING));          
-          // And hang up
-          vcs.hangCall();
-        }
-        Serial.println("Call Finished");
-        remoteNumber="";
-        Serial.println("Enter phone number to call.");
-      } 
-      else
-      {
-        Serial.println("That's too long for a phone number. I'm forgetting it"); 
-        remoteNumber = "";
-      }
-    } 
-    else
-    {
-      // add the latest character to the message to send:
-      if(inChar!='\r')
-        remoteNumber += inChar;
-    }
-  } 
-}
-