Moving libraries out of arduino platform / core directory and to top-level.

2 files changed, 0 insertions, 295 deletions

diff --git a/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile b/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile
deleted file mode 100644
index e968c0a..0000000
--- a/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile
+++ /dev/null
@@ -1,263 +0,0 @@
-# Arduino makefile
-#
-# This makefile allows you to build sketches from the command line
-# without the Arduino environment (or Java).
-#
-# The Arduino environment does preliminary processing on a sketch before
-# compiling it.  If you're using this makefile instead, you'll need to do
-# a few things differently:
-#
-#   - Give your program's file a .cpp extension (e.g. foo.cpp).
-#
-#   - Put this line at top of your code: #include <WProgram.h>
-#
-#   - Write prototypes for all your functions (or define them before you
-#     call them).  A prototype declares the types of parameters a
-#     function will take and what type of value it will return.  This
-#     means that you can have a call to a function before the definition
-#     of the function.  A function prototype looks like the first line of
-#     the function, with a semi-colon at the end.  For example:
-#     int digitalRead(int pin);
-#
-# Instructions for using the makefile:
-#
-#  1. Copy this file into the folder with your sketch.
-#
-#  2. Below, modify the line containing "TARGET" to refer to the name of
-#     of your program's file without an extension (e.g. TARGET = foo).
-#
-#  3. Modify the line containg "ARDUINO" to point the directory that
-#     contains the Arduino core (for normal Arduino installations, this
-#     is the hardware/cores/arduino sub-directory).
-#
-#  4. Modify the line containing "PORT" to refer to the filename
-#     representing the USB or serial connection to your Arduino board
-#     (e.g. PORT = /dev/tty.USB0).  If the exact name of this file
-#     changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*).
-#
-#  5. At the command line, change to the directory containing your
-#     program's file and the makefile.
-#
-#  6. Type "make" and press enter to compile/verify your program.
-#
-#  7. Type "make upload", reset your Arduino board, and press enter  to
-#     upload your program to the Arduino board.
-#
-# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $
-
-PORT = /dev/tty.usbserial-*
-TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|')
-ARDUINO = /Applications/arduino
-ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino
-ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries
-INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \
-	-I$(ARDUINO_LIB_SRC)/EEPROM \
-	-I$(ARDUINO_LIB_SRC)/Firmata \
-	-I$(ARDUINO_LIB_SRC)/Servo \
-	-I$(ARDUINO_LIB_SRC)
-SRC = $(wildcard $(ARDUINO_SRC)/*.c)
-CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \
-	$(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \
-	$(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \
-	$(ARDUINO_LIB_SRC)/Servo/Servo.cpp \
-	$(ARDUINO_SRC)/WMath.cpp
-HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h)
-
-MCU = atmega168
-#MCU = atmega8
-F_CPU = 16000000
-FORMAT = ihex
-UPLOAD_RATE = 19200
-
-# Name of this Makefile (used for "make depend").
-MAKEFILE = Makefile
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-DEBUG = stabs
-
-OPT = s
-
-# Place -D or -U options here
-CDEFS = -DF_CPU=$(F_CPU)
-CXXDEFS = -DF_CPU=$(F_CPU)
-
-# Compiler flag to set the C Standard level.
-# c89   - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99   - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-CDEBUG = -g$(DEBUG)
-CWARN = -Wall -Wstrict-prototypes
-CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
-#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-
-CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
-CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT)
-#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
-LDFLAGS = 
-
-
-# Programming support using avrdude. Settings and variables.
-AVRDUDE_PROGRAMMER = stk500
-AVRDUDE_PORT = $(PORT)
-AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
-AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
-  -b $(UPLOAD_RATE) -q -V
-
-# Program settings
-CC = avr-gcc
-CXX = avr-g++
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-MV = mv -f
-
-# Define all object files.
-OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o)
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
-ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: build
-
-build: applet/$(TARGET).hex
-
-eep: applet/$(TARGET).eep
-lss: applet/$(TARGET).lss 
-sym: applet/$(TARGET).sym
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT=$(OBJCOPY) --debugging \
---change-section-address .data-0x800000 \
---change-section-address .bss-0x800000 \
---change-section-address .noinit-0x800000 \
---change-section-address .eeprom-0x810000 
-
-
-coff: applet/$(TARGET).elf
-	$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof
-
-
-extcoff: applet/$(TARGET).elf
-	$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof
-
-
-.SUFFIXES: .elf .hex .eep .lss .sym .pde
-
-.elf.hex:
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-.elf.eep:
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-# Create extended listing file from ELF output file.
-.elf.lss:
-	$(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-.elf.sym:
-	$(NM) -n $< > $@
-
-
-# Compile: create object files from C++ source files.
-.cpp.o: $(HEADERS)
-	$(CXX) -c $(ALL_CXXFLAGS) $< -o $@ 
-
-# Compile: create object files from C source files.
-.c.o: $(HEADERS)
-	$(CC)  -c $(ALL_CFLAGS) $< -o $@ 
-
-
-# Compile: create assembler files from C source files.
-.c.s:
-	$(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-.S.o:
-	$(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-
-applet/$(TARGET).cpp: $(TARGET).pde
-	test -d applet || mkdir applet
-	echo '#include "WProgram.h"' > applet/$(TARGET).cpp
-	echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp
-	sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \
-		grep -v 'loop()' >> applet/$(TARGET).cpp
-	cat $(TARGET).pde >> applet/$(TARGET).cpp
-	cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp
-
-# Link: create ELF output file from object files.
-applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ)
-	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
-
-pd_close_serial:
-	echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true
-
-# Program the device.  
-upload: applet/$(TARGET).hex
-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
-
-
-pd_test: build pd_close_serial upload
-
-# Target: clean project.
-clean:
-	$(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \
-	applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \
-	applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \
-	$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
-	rmdir -- applet
-
-depend:
-	if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \
-	then \
-		sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \
-			$(MAKEFILE).$$$$ && \
-		$(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \
-	fi
-	echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \
-		>> $(MAKEFILE); \
-	$(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE)
-
-.PHONY:	all build eep lss sym coff extcoff clean depend pd_close_serial pd_test
-
-# for emacs
-etags:
-	make etags_`uname -s`
-	etags *.pde \
-		$(ARDUINO_SRC)/*.[ch] \
-		$(ARDUINO_SRC)/*.cpp \
-		$(ARDUINO_LIB_SRC)/*/*.[ch] \
-		$(ARDUINO_LIB_SRC)/*/*.cpp \
-		$(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \
-		$(ARDUINO)/hardware/tools/avr/avr/include/*.[ch]
-
-etags_Darwin:
-#	etags -a 
-
-etags_Linux:
-#	etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h
-
-etags_MINGW:
-#	etags -a /usr/include/*.h /usr/include/sys/*.h 
-
-
-
diff --git a/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde b/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde
deleted file mode 100644
index 430d0d0..0000000
--- a/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Supports as many analog inputs and analog PWM outputs as possible.
- *
- * This example code is in the public domain.
- */
-#include <Firmata.h>
-
-byte analogPin;
-
-void analogWriteCallback(byte pin, int value)
-{
-    pinMode(pin,OUTPUT);
-    analogWrite(pin, value);
-}
-
-void setup()
-{
-    Firmata.setFirmwareVersion(0, 1);
-    Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
-    Firmata.begin(57600);
-}
-
-void loop()
-{
-    while(Firmata.available()) {
-        Firmata.processInput();
-    }
-    for(analogPin = 0; analogPin < TOTAL_ANALOG_PINS; analogPin++) {
-        Firmata.sendAnalog(analogPin, analogRead(analogPin)); 
-    }
-}
-
-