Merge of arduino-1.0.1. Work in progress...

11 files changed, 89 insertions, 26 deletions

diff --git a/libraries/Ethernet/examples/ChatServer/ChatServer.ino b/libraries/Ethernet/examples/ChatServer/ChatServer.ino
index de75257..d50e5a6 100644
--- a/libraries/Ethernet/examples/ChatServer/ChatServer.ino
+++ b/libraries/Ethernet/examples/ChatServer/ChatServer.ino
@@ -12,7 +12,7 @@
  
  created 18 Dec 2009
  by David A. Mellis
- modified 12 March 2012
+ modified 9 Apr 2012
  by Tom Igoe
  
  */
@@ -39,8 +39,13 @@ void setup() {
   Ethernet.begin(mac, ip, gateway, subnet);
   // start listening for clients
   server.begin();
-  // open the serial port
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   Serial.print("Chat server address:");
   Serial.println(Ethernet.localIP());
 }
diff --git a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino
index 630dd17..5eaaf24 100644
--- a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino
+++ b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino
@@ -9,6 +9,7 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 12 April 2011
+ modified 9 Apr 2012
  by Tom Igoe
  
  */
@@ -27,8 +28,13 @@ byte mac[] = {
 EthernetClient client;
 
 void setup() {
-  // start the serial library:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  // this check is only needed on the Leonardo:
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
   // start the Ethernet connection:
   if (Ethernet.begin(mac) == 0) {
     Serial.println("Failed to configure Ethernet using DHCP");
diff --git a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino
index 5082054..09cbd43 100644
--- a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino
+++ b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino
@@ -12,6 +12,7 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 21 May 2011
+ modified 9 Apr 2012
  by Tom Igoe
  Based on ChatServer example by David A. Mellis
  
@@ -34,8 +35,14 @@ EthernetServer server(23);
 boolean gotAMessage = false; // whether or not you got a message from the client yet
 
 void setup() {
-   // open the serial port
+  // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  // this check is only needed on the Leonardo:
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   // start the Ethernet connection:
   Serial.println("Trying to get an IP address using DHCP");
   if (Ethernet.begin(mac) == 0) {
diff --git a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino
index 5c7a53a..c14abf4 100644
--- a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino
+++ b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino
@@ -9,7 +9,7 @@
  
  created 18 Dec 2009
  by David A. Mellis
- modified 12 April 2011
+ modified 9 Apr 2012
  by Tom Igoe, based on work by Adrian McEwen
  
  */
@@ -28,8 +28,13 @@ char serverName[] = "www.google.com";
 EthernetClient client;
 
 void setup() {
-  // start the serial library:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   // start the Ethernet connection:
   if (Ethernet.begin(mac) == 0) {
     Serial.println("Failed to configure Ethernet using DHCP");
diff --git a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
index 4d4290d..dfd2d40 100644
--- a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
+++ b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
@@ -16,7 +16,7 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 15 March 2010
- updated 16 Mar 2012
+ modified 9 Apr 2012
  by Tom Igoe with input from Usman Haque and Joe Saavedra
  
 http://arduino.cc/en/Tutorial/PachubeClient
@@ -53,8 +53,13 @@ boolean lastConnected = false;                 // state of the connection last t
 const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com
 
 void setup() {
-  // start serial port:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
  // start the Ethernet connection:
   if (Ethernet.begin(mac) == 0) {
     Serial.println("Failed to configure Ethernet using DHCP");
diff --git a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
index 3535287..2a96e9f 100644
--- a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
+++ b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
@@ -1,12 +1,12 @@
 /*
-  Pachube sensor client with Strings
+  Cosm sensor client with Strings
  
- This sketch connects an analog sensor to Pachube (http://www.pachube.com)
+ This sketch connects an analog sensor to Cosm (http://www.cosm.com)
  using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or
  the Adafruit Ethernet shield, either one will work, as long as it's got
  a Wiznet Ethernet module on board.
  
- This example has been updated to use version 2.0 of the Pachube.com API. 
+ This example has been updated to use version 2.0 of the Cosm.com API. 
  To make it work, create a feed with two datastreams, and give them the IDs
  sensor1 and sensor2. Or change the code below to match your feed.
  
@@ -18,10 +18,10 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 15 March 2010
- updated 16 Mar 2012
+ modified 9 Apr 2012
  by Tom Igoe with input from Usman Haque and Joe Saavedra
  
- http://arduino.cc/en/Tutorial/PachubeClientString
+ http://arduino.cc/en/Tutorial/CosmClientString
  This code is in the public domain.
  
  */
@@ -30,14 +30,16 @@
 #include <Ethernet.h>
 
 
-#define APIKEY         "YOUR API KEY GOES HERE" // replace your pachube api key here
+/#define APIKEY         "YOUR API KEY GOES HERE" // replace your Cosm api key here
 #define FEEDID         00000 // replace your feed ID
 #define USERAGENT      "My Project" // user agent is the project name
 
+
 // assign a MAC address for the ethernet controller.
 // fill in your address here:
   byte mac[] = { 
   0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
+
 // fill in an available IP address on your network here,
 // for manual configuration:
 IPAddress ip(10,0,1,20);
@@ -47,16 +49,21 @@ EthernetClient client;
 
 // if you don't want to use DNS (and reduce your sketch size)
 // use the numeric IP instead of the name for the server:
-//IPAddress server(216,52,233,122);      // numeric IP for api.pachube.com
-char server[] = "api.pachube.com";   // name address for pachube API
+IPAddress server(216,52,233,121);      // numeric IP for api.cosm.com
+//char server[] = "api.cosm.com";   // name address for Cosm API
 
 unsigned long lastConnectionTime = 0;          // last time you connected to the server, in milliseconds
 boolean lastConnected = false;                 // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  //delay between updates to Pachube.com
+const unsigned long postingInterval = 10*1000;  //delay between updates to Cosm.com
 
 void setup() {
-  // start serial port:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   // give the ethernet module time to boot up:
   delay(1000);
   // start the Ethernet connection:
@@ -76,7 +83,7 @@ void loop() {
   dataString += sensorReading;
 
   // you can append multiple readings to this String if your
-  // pachube feed is set up to handle multiple values:
+  // Cosm feed is set up to handle multiple values:
   int otherSensorReading = analogRead(A1);
   dataString += "\nsensor2,";
   dataString += otherSensorReading;
@@ -116,8 +123,8 @@ void sendData(String thisData) {
     client.print("PUT /v2/feeds/");
     client.print(FEEDID);
     client.println(".csv HTTP/1.1");
-    client.println("Host: api.pachube.com");
-    client.print("X-PachubeApiKey: ");
+    client.println("Host: api.cosm.com");
+    client.print("X-CosmApiKey: ");
     client.println(APIKEY);
     client.print("User-Agent: ");
     client.println(USERAGENT);
diff --git a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
index 5cf1ad8..3457125 100644
--- a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
+++ b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
@@ -13,6 +13,7 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 14 Sep 2010
+ modified 9 Apr 2012
  by Tom Igoe
  
  */
@@ -38,8 +39,13 @@ EthernetClient client;
 void setup() {
   // start the Ethernet connection:
   Ethernet.begin(mac, ip);
-  // start the serial library:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   // give the Ethernet shield a second to initialize:
   delay(1000);
   Serial.println("connecting...");
diff --git a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino
index a3b397d..3587d72 100644
--- a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino
+++ b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino
@@ -17,6 +17,7 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 21 May 2011
+ modified 9 Apr 2012
  by Tom Igoe
  
  This code is in the public domain.
@@ -51,8 +52,13 @@ void setup() {
   currentLine.reserve(256);
   tweet.reserve(150);
 
-  // initialize serial:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   // attempt a DHCP connection:
   Serial.println("Attempting to get an IP address using DHCP:");
   if (!Ethernet.begin(mac)) {
diff --git a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino
index b4e24b8..93ffe39 100644
--- a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino
+++ b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino
@@ -9,7 +9,7 @@
  
  created 4 Sep 2010 
  by Michael Margolis
- modified 17 Sep 2010
+ modified 9 Apr 2012
  by Tom Igoe
  
  This code is in the public domain.
@@ -38,7 +38,12 @@ EthernetUDP Udp;
 
 void setup() 
 {
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
 
   // start Ethernet and UDP
   if (Ethernet.begin(mac) == 0) {
diff --git a/libraries/Ethernet/examples/WebClient/WebClient.ino b/libraries/Ethernet/examples/WebClient/WebClient.ino
index 1806854..5d5d7f2 100644
--- a/libraries/Ethernet/examples/WebClient/WebClient.ino
+++ b/libraries/Ethernet/examples/WebClient/WebClient.ino
@@ -8,6 +8,7 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 18 Dec 2009
+ modified 9 Apr 2012
  by David A. Mellis
  
  */
@@ -26,8 +27,12 @@ IPAddress server(173,194,33,104); // Google
 EthernetClient client;
 
 void setup() {
-  // start the serial library:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
   // start the Ethernet connection:
   if (Ethernet.begin(mac) == 0) {
     Serial.println("Failed to configure Ethernet using DHCP");
diff --git a/libraries/Ethernet/examples/WebServer/WebServer.ino b/libraries/Ethernet/examples/WebServer/WebServer.ino
index 7cf2c53..ce8dbb1 100644
--- a/libraries/Ethernet/examples/WebServer/WebServer.ino
+++ b/libraries/Ethernet/examples/WebServer/WebServer.ino
@@ -10,7 +10,7 @@
  
  created 18 Dec 2009
  by David A. Mellis
- modified 20 Mar 2012
+ modified 9 Apr 2012
  by Tom Igoe
  
  */
@@ -30,7 +30,13 @@ IPAddress ip(192,168,1, 177);
 EthernetServer server(80);
 
 void setup() {
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+
+
   // start the Ethernet connection and the server:
   Ethernet.begin(mac, ip);
   server.begin();