Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 111 deletions

diff --git a/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino b/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino
deleted file mode 100644
index 650f74e..0000000
--- a/libraries/Ethernet/examples/WebClientRepeating/WebClientRepeating.ino
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-  Repeating Web client
- 
- This sketch connects to a a web server and makes a request
- using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or
- the Adafruit Ethernet shield, either one will work, as long as it's got
- a Wiznet Ethernet module on board.
- 
- This example uses DNS, by assigning the Ethernet client with a MAC address,
- IP address, and DNS address.
- 
- Circuit:
- * Ethernet shield attached to pins 10, 11, 12, 13
- 
- created 19 Apr 2012
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/WebClientRepeating
- This code is in the public domain.
- 
- */
-
-#include <SPI.h>
-#include <Ethernet.h>
-
-// assign a MAC address for the ethernet controller.
-// fill in your address here:
-byte mac[] = { 
-  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
-// fill in an available IP address on your network here,
-// for manual configuration:
-IPAddress ip(10,0,0,20);
-
-// fill in your Domain Name Server address here:
-IPAddress myDns(1,1,1,1);
-
-// initialize the library instance:
-EthernetClient client;
-
-char server[] = "www.arduino.cc";
-
-unsigned long lastConnectionTime = 0;             // last time you connected to the server, in milliseconds
-boolean lastConnected = false;                    // state of the connection last time through the main loop
-const unsigned long postingInterval = 60L*1000L;  // delay between updates, in milliseconds
-						  // the "L" is needed to use long type numbers
-
-void setup() {
-  // start serial port:
-  Serial.begin(9600);
-  // give the ethernet module time to boot up:
-  delay(1000);
-  // start the Ethernet connection using a fixed IP address and DNS server:
-  Ethernet.begin(mac, ip, myDns);
-  // print the Ethernet board/shield's IP address:
-  Serial.print("My IP address: ");
-  Serial.println(Ethernet.localIP());
-}
-
-void loop() {
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only:
-  if (client.available()) {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // if there's no net connection, but there was one last time
-  // through the loop, then stop the client:
-  if (!client.connected() && lastConnected) {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-
-  // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data:
-  if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
-    httpRequest();
-  }
-  // store the state of the connection for next time through
-  // the loop:
-  lastConnected = client.connected();
-}
-
-// this method makes a HTTP connection to the server:
-void httpRequest() {
-  // if there's a successful connection:
-  if (client.connect(server, 80)) {
-    Serial.println("connecting...");
-    // send the HTTP PUT request:
-    client.println("GET /latest.txt HTTP/1.1");
-    client.println("Host: www.arduino.cc");
-    client.println("User-Agent: arduino-ethernet");
-    client.println("Connection: close");
-    client.println();
-
-    // note the time that the connection was made:
-    lastConnectionTime = millis();
-  } 
-  else {
-    // if you couldn't make a connection:
-    Serial.println("connection failed");
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-}
-
-
-
-