Moving all AVR specific libraries to hardware/avr

1 files changed, 118 insertions, 0 deletions

diff --git a/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.pde b/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.pde
new file mode 100644
index 0000000..081d691
--- /dev/null
+++ b/libraries/Ethernet/examples/UDPSendReceiveString/UDPSendReceiveString.pde
@@ -0,0 +1,118 @@
+/*
+  UDPSendReceive.pde:
+ This sketch receives UDP message strings, prints them to the serial port
+ and sends an "acknowledge" string back to the sender
+ 
+ A Processing sketch is included at the end of file that can be used to send 
+ and received messages for testing with a computer.
+ 
+ created 21 Aug 2010
+ by Michael Margolis
+ 
+ This code is in the public domain.
+ */
+
+
+#include <SPI.h>         // needed for Arduino versions later than 0018
+#include <Ethernet.h>
+#include <Udp.h>         // UDP library from: bjoern@cs.stanford.edu 12/30/2008
+
+
+// Enter a MAC address and IP address for your controller below.
+// The IP address will be dependent on your local network:
+byte mac[] = {  
+  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+IPAddress ip(192, 168, 1, 177);
+
+unsigned int localPort = 8888;      // local port to listen on
+
+// buffers for receiving and sending data
+char packetBuffer[UDP_TX_PACKET_MAX_SIZE]; //buffer to hold incoming packet,
+char  ReplyBuffer[] = "acknowledged";       // a string to send back
+
+// A UDP instance to let us send and receive packets over UDP
+UDP Udp;
+
+void setup() {
+  // start the Ethernet and UDP:
+  Ethernet.begin(mac,ip);
+  Udp.begin(localPort);
+
+  Serial.begin(9600);
+}
+
+void loop() {
+  // if there's data available, read a packet
+  int packetSize = Udp.parsePacket();
+  if(packetSize)
+  {
+    Serial.print("Received packet of size ");
+    Serial.println(packetSize);
+    Serial.print("From ");
+    IPAddress remote = Udp.remoteIP();
+    for (int i =0; i < 4; i++)
+    {
+      Serial.print(remote[i], DEC);
+      if (i < 3)
+      {
+        Serial.print(".");
+      }
+    }
+    Serial.print(", port ");
+    Serial.println(Udp.remotePort());
+
+    // read the packet into packetBufffer
+    Udp.read(packetBuffer,UDP_TX_PACKET_MAX_SIZE);
+    Serial.println("Contents:");
+    Serial.println(packetBuffer);
+
+    // send a reply, to the IP address and port that sent us the packet we received
+    Udp.beginPacket(Udp.remoteIP(), Udp.remotePort());
+    Udp.write(ReplyBuffer);
+    Udp.endPacket();
+  }
+  delay(10);
+}
+
+
+/*
+  Processing sketch to run with this example
+ =====================================================
+ 
+ // Processing UDP example to send and receive string data from Arduino 
+ // press any key to send the "Hello Arduino" message
+ 
+ 
+ import hypermedia.net.*;
+ 
+ UDP udp;  // define the UDP object
+ 
+ 
+ void setup() {
+ udp = new UDP( this, 6000 );  // create a new datagram connection on port 6000
+ //udp.log( true ); 		// <-- printout the connection activity
+ udp.listen( true );           // and wait for incoming message  
+ }
+ 
+ void draw()
+ {
+ }
+ 
+ void keyPressed() {
+ String ip       = "192.168.1.177";	// the remote IP address
+ int port        = 8888;		// the destination port
+ 
+ udp.send("Hello World", ip, port );   // the message to send
+ 
+ }
+ 
+ void receive( byte[] data ) { 			// <-- default handler
+ //void receive( byte[] data, String ip, int port ) {	// <-- extended handler
+ 
+ for(int i=0; i < data.length; i++) 
+ print(char(data[i]));  
+ println();   
+ }
+ */
+
+