Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 93 deletions

diff --git a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
deleted file mode 100644
index 3457125..0000000
--- a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-  Telnet client
- 
- This sketch connects to a a telnet server (http://www.google.com)
- using an Arduino Wiznet Ethernet shield.  You'll need a telnet server 
- to test this with.
- Processing's ChatServer example (part of the network library) works well, 
- running on port 10002. It can be found as part of the examples
- in the Processing application, available at 
- http://processing.org/
- 
- Circuit:
- * Ethernet shield attached to pins 10, 11, 12, 13
- 
- created 14 Sep 2010
- modified 9 Apr 2012
- by Tom Igoe
- 
- */
-
-#include <SPI.h>
-#include <Ethernet.h>
-
-// Enter a MAC address and IP address for your controller below.
-// The IP address will be dependent on your local network:
-byte mac[] = {  
-  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-IPAddress ip(192,168,1,177);
-
-// Enter the IP address of the server you're connecting to:
-IPAddress server(1,1,1,1); 
-
-// Initialize the Ethernet client library
-// with the IP address and port of the server 
-// that you want to connect to (port 23 is default for telnet;
-// if you're using Processing's ChatServer, use  port 10002):
-EthernetClient client;
-
-void setup() {
-  // start the Ethernet connection:
-  Ethernet.begin(mac, ip);
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  // give the Ethernet shield a second to initialize:
-  delay(1000);
-  Serial.println("connecting...");
-
-  // if you get a connection, report back via serial:
-  if (client.connect(server, 10002)) {
-    Serial.println("connected");
-  } 
-  else {
-    // if you didn't get a connection to the server:
-    Serial.println("connection failed");
-  }
-}
-
-void loop()
-{
-  // if there are incoming bytes available 
-  // from the server, read them and print them:
-  if (client.available()) {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // as long as there are bytes in the serial queue,
-  // read them and send them out the socket if it's open:
-  while (Serial.available() > 0) {
-    char inChar = Serial.read();
-    if (client.connected()) {
-      client.print(inChar); 
-    }
-  }
-
-  // if the server's disconnected, stop the client:
-  if (!client.connected()) {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-    // do nothing:
-    while(true);
-  }
-}
-
-
-
-