Merge branch 'ide-1.5.x-library-to-new-format' into ide-1.5.x

1 files changed, 0 insertions, 152 deletions

diff --git a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
deleted file mode 100644
index 2a96e9f..0000000
--- a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
-  Cosm sensor client with Strings
- 
- This sketch connects an analog sensor to Cosm (http://www.cosm.com)
- using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or
- the Adafruit Ethernet shield, either one will work, as long as it's got
- a Wiznet Ethernet module on board.
- 
- This example has been updated to use version 2.0 of the Cosm.com API. 
- To make it work, create a feed with two datastreams, and give them the IDs
- sensor1 and sensor2. Or change the code below to match your feed.
- 
- This example uses the String library, which is part of the Arduino core from
- version 0019.  
- 
- Circuit:
- * Analog sensor attached to analog in 0
- * Ethernet shield attached to pins 10, 11, 12, 13
- 
- created 15 March 2010
- modified 9 Apr 2012
- by Tom Igoe with input from Usman Haque and Joe Saavedra
- 
- http://arduino.cc/en/Tutorial/CosmClientString
- This code is in the public domain.
- 
- */
-
-#include <SPI.h>
-#include <Ethernet.h>
-
-
-/#define APIKEY         "YOUR API KEY GOES HERE" // replace your Cosm api key here
-#define FEEDID         00000 // replace your feed ID
-#define USERAGENT      "My Project" // user agent is the project name
-
-
-// assign a MAC address for the ethernet controller.
-// fill in your address here:
-  byte mac[] = { 
-  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
-
-// fill in an available IP address on your network here,
-// for manual configuration:
-IPAddress ip(10,0,1,20);
-
-// initialize the library instance:
-EthernetClient client;
-
-// if you don't want to use DNS (and reduce your sketch size)
-// use the numeric IP instead of the name for the server:
-IPAddress server(216,52,233,121);      // numeric IP for api.cosm.com
-//char server[] = "api.cosm.com";   // name address for Cosm API
-
-unsigned long lastConnectionTime = 0;          // last time you connected to the server, in milliseconds
-boolean lastConnected = false;                 // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  //delay between updates to Cosm.com
-
-void setup() {
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  // give the ethernet module time to boot up:
-  delay(1000);
-  // start the Ethernet connection:
-  if (Ethernet.begin(mac) == 0) {
-    Serial.println("Failed to configure Ethernet using DHCP");
-    // DHCP failed, so use a fixed IP address:
-    Ethernet.begin(mac, ip);
-  }
-}
-
-void loop() {
-  // read the analog sensor:
-  int sensorReading = analogRead(A0);   
-  // convert the data to a String to send it:
-
-  String dataString = "sensor1,";
-  dataString += sensorReading;
-
-  // you can append multiple readings to this String if your
-  // Cosm feed is set up to handle multiple values:
-  int otherSensorReading = analogRead(A1);
-  dataString += "\nsensor2,";
-  dataString += otherSensorReading;
-
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only:
-  if (client.available()) {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // if there's no net connection, but there was one last time
-  // through the loop, then stop the client:
-  if (!client.connected() && lastConnected) {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-
-  // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data: 
-  if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
-    sendData(dataString);
-  }
-  // store the state of the connection for next time through
-  // the loop:
-  lastConnected = client.connected();
-}
-
-// this method makes a HTTP connection to the server:
-void sendData(String thisData) {
-  // if there's a successful connection:
-  if (client.connect(server, 80)) {
-    Serial.println("connecting...");
-    // send the HTTP PUT request:
-    client.print("PUT /v2/feeds/");
-    client.print(FEEDID);
-    client.println(".csv HTTP/1.1");
-    client.println("Host: api.cosm.com");
-    client.print("X-CosmApiKey: ");
-    client.println(APIKEY);
-    client.print("User-Agent: ");
-    client.println(USERAGENT);
-    client.print("Content-Length: ");
-    client.println(thisData.length());
-
-    // last pieces of the HTTP PUT request:
-    client.println("Content-Type: text/csv");
-    client.println("Connection: close");
-    client.println();
-
-    // here's the actual content of the PUT request:
-    client.println(thisData);
-  } 
-  else {
-    // if you couldn't make a connection:
-    Serial.println("connection failed");
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-  // note the time that the connection was made or attempted:
-  lastConnectionTime = millis();
-}
-