Pre-merge upstream Arduino

1 files changed, 48 insertions, 24 deletions

diff --git a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
index 4a03100..3535287 100644
--- a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
+++ b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino
@@ -6,6 +6,10 @@
  the Adafruit Ethernet shield, either one will work, as long as it's got
  a Wiznet Ethernet module on board.
  
+ This example has been updated to use version 2.0 of the Pachube.com API. 
+ To make it work, create a feed with two datastreams, and give them the IDs
+ sensor1 and sensor2. Or change the code below to match your feed.
+ 
  This example uses the String library, which is part of the Arduino core from
  version 0019.  
  
@@ -14,9 +18,10 @@
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 15 March 2010
- updated 26 Oct 2011
- by Tom Igoe
+ updated 16 Mar 2012
+ by Tom Igoe with input from Usman Haque and Joe Saavedra
  
+ http://arduino.cc/en/Tutorial/PachubeClientString
  This code is in the public domain.
  
  */
@@ -24,9 +29,14 @@
 #include <SPI.h>
 #include <Ethernet.h>
 
+
+#define APIKEY         "YOUR API KEY GOES HERE" // replace your pachube api key here
+#define FEEDID         00000 // replace your feed ID
+#define USERAGENT      "My Project" // user agent is the project name
+
 // assign a MAC address for the ethernet controller.
 // fill in your address here:
-byte mac[] = { 
+  byte mac[] = { 
   0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
 // fill in an available IP address on your network here,
 // for manual configuration:
@@ -35,9 +45,14 @@ IPAddress ip(10,0,1,20);
 // initialize the library instance:
 EthernetClient client;
 
-long lastConnectionTime = 0;        // last time you connected to the server, in milliseconds
-boolean lastConnected = false;      // state of the connection last time through the main loop
-const int postingInterval = 10000;  //delay between updates to Pachube.com
+// if you don't want to use DNS (and reduce your sketch size)
+// use the numeric IP instead of the name for the server:
+//IPAddress server(216,52,233,122);      // numeric IP for api.pachube.com
+char server[] = "api.pachube.com";   // name address for pachube API
+
+unsigned long lastConnectionTime = 0;          // last time you connected to the server, in milliseconds
+boolean lastConnected = false;                 // state of the connection last time through the main loop
+const unsigned long postingInterval = 10*1000;  //delay between updates to Pachube.com
 
 void setup() {
   // start serial port:
@@ -47,7 +62,7 @@ void setup() {
   // start the Ethernet connection:
   if (Ethernet.begin(mac) == 0) {
     Serial.println("Failed to configure Ethernet using DHCP");
-    // Configure manually:
+    // DHCP failed, so use a fixed IP address:
     Ethernet.begin(mac, ip);
   }
 }
@@ -56,13 +71,15 @@ void loop() {
   // read the analog sensor:
   int sensorReading = analogRead(A0);   
   // convert the data to a String to send it:
-  String dataString = String(sensorReading);
+
+  String dataString = "sensor1,";
+  dataString += sensorReading;
 
   // you can append multiple readings to this String if your
   // pachube feed is set up to handle multiple values:
   int otherSensorReading = analogRead(A1);
-  dataString += ",";
-  dataString += String(otherSensorReading);
+  dataString += "\nsensor2,";
+  dataString += otherSensorReading;
 
   // if there's incoming data from the net connection.
   // send it out the serial port.  This is for debugging
@@ -81,7 +98,7 @@ void loop() {
   }
 
   // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data:
+  // your last connection, then connect again and send data: 
   if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
     sendData(dataString);
   }
@@ -93,29 +110,36 @@ void loop() {
 // this method makes a HTTP connection to the server:
 void sendData(String thisData) {
   // if there's a successful connection:
-  if (client.connect("www.pachube.com", 80)) {
+  if (client.connect(server, 80)) {
     Serial.println("connecting...");
-    // send the HTTP PUT request. 
-    // fill in your feed address here:
-    client.print("PUT /api/YOUR_FEED_HERE.csv HTTP/1.1\n");
-    client.print("Host: www.pachube.com\n");
-    // fill in your Pachube API key here:
-    client.print("X-PachubeApiKey: YOUR_KEY_HERE\n");
+    // send the HTTP PUT request:
+    client.print("PUT /v2/feeds/");
+    client.print(FEEDID);
+    client.println(".csv HTTP/1.1");
+    client.println("Host: api.pachube.com");
+    client.print("X-PachubeApiKey: ");
+    client.println(APIKEY);
+    client.print("User-Agent: ");
+    client.println(USERAGENT);
     client.print("Content-Length: ");
-    client.println(thisData.length(), DEC);
+    client.println(thisData.length());
 
     // last pieces of the HTTP PUT request:
-    client.print("Content-Type: text/csv\n");
-    client.println("Connection: close\n");
+    client.println("Content-Type: text/csv");
+    client.println("Connection: close");
+    client.println();
 
     // here's the actual content of the PUT request:
     client.println(thisData);
-
-    // note the time that the connection was made:
-    lastConnectionTime = millis();
   } 
   else {
     // if you couldn't make a connection:
     Serial.println("connection failed");
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
   }
+  // note the time that the connection was made or attempted:
+  lastConnectionTime = millis();
 }
+